2010 Toyota Camry Owners Manual

Repeat play

■ Repeating a track

Press

(RPT) or

that corresponds to “RPT”.

To cancel, press the same button until “OFF” is displayed.

■ Repeating all of the tracks on a CD (type B only)

Press

that corresponds to “RPT” twice.

To cancel, press the button again.

227

3-2. Using the audio system

Switching the display

Press

or

is pressed, the display changes in the following

Type A: Each time order: Track no./Elapsed time → CD title → Track name.

Type B and C: Each time lowing order: Track title → Track name/Artist name → Track name/Elapsed time.

is pressed, the display changes in the fol-

■Display (type A only)

Up to 12 characters can be displayed at a time.

If there are 13 characters or more, pressing and holding or more will display the remaining characters. A maximum of 24 characters can be displayed.

for 1 second

is pressed for 1 second or more again or has not been pressed for 6

If seconds or more, the display will return to the first 12 characters. Depending on the contents recorded, the characters may not be displayed properly or may not be displayed at all.

228

3-2. Using the audio system

■Error messages

“CD CHECK”: This indicates a problem either with the CD or inside the player. The CD may be dirty, damaged or inserted up-side down.

“WAIT” or “PLEASE WAIT”: Operation has stopped due to a high tempera- ture inside the player. Wait for a while and then

press dealer if the CD still cannot be played back.

. Contact your Toyota

or

■Discs that can be used

Discs with the marks shown below can be used. Playback may not be possible depending on the recording format or disc features, or due to scratches, dirt or deterioration.

CDs with copy-protection features may not be used.

■CD player protection feature

To protect the internal components, playback is automatically stopped when a problem is detected while the CD player is being used.

■If CDs are left inside the CD player or in the ejected position for

extended periods CDs may be damaged and may not play properly.

■Lens cleaners

Do not use lens cleaners. Doing so may damage the CD player.

229

3-2. Using the audio system

NOTICE

■CDs and adapters that cannot be used

Do not use the following types of CDs, 3 in. (8 cm) CD adapters or Dual Discs. Doing so may damage the CD player and/or the CD insert/eject function.

●CD player with changer and AM/FM radio: CDs that have a diameter that is not 4.7 in. (12 cm)

●Low-quality and deformed CDs

●CDs with a transparent or translucent

recording area

●CDs that have had tape, stickers or CD- R labels attached to them, or that have had the label peeled off

230

3-2. Using the audio system

NOTICE

■CD player precautions

Failure to follow the precautions below may result in serious damage to the CDs or the player itself. ●Do not insert anything other than CDs into the CD slot. ●Do not apply oil to the CD player. ●Store CDs away from direct sunlight. ●Never try to disassemble any part of the CD player.

●Do not insert more than one CD at a

time.

231

3-2. Using the audio system Playing MP3 and WMA discs

Type A

Power

Volume

CD eject

Selecting a folder

Selecting a file

Searching playback

Displaying text messages

Type B and C

Power

Volume

Disc eject

Fast- forwarding and reversing

Selecting a file

Playback

Reversing Fast-forwarding

Repeat play Random playback

Disc load (type B only)

Selecting a file

Searching playback

Selecting a folder and files

Playback

Selector buttons

Playback/pause Displaying text messages

232

3-2. Using the audio system

Loading and ejecting MP3 and WMA discs

→P. 224

Selecting MP3 and WMA discs (type B only)

→P. 225

Selecting and scanning a folder

■ Selecting folders one at a time

Press “∧” or “∨” on

or

to select the desired folder.

■ Scanning the first file of all the folders

STEP 1

Press and hold

or

until you hear a beep.

The first ten seconds of the first file in each folder will be played.

STEP 2

When the desired folder is reached, press again.

or

■ Returning to the first folder

Press and hold “∨” on

or

until you hear a beep.

Selecting and scanning files

■ Selecting one file at a time

Turn

or

or press “∧” or “∨” on

or

to

select the desired file.

233

3-2. Using the audio system

■ Selecting the desired file by cueing the files in the folder

Press

or

When the desired file is reached, press

or

once again.

Fast-forwarding and reversing files

Type A: Press

) or

).

Type B and C: Press and hold “∧” or “∨” on

Playing and pausing files (type B and C)

Press

Random playback

■ Playing files from a particular folder in random order

Press

(RAND) or

that corresponds to “RDM”.

To cancel, press the same button until “OFF” is displayed.

■ Playing all of the files on a disc in random order (type B only)

Press

that corresponds to “RDM” twice.

To cancel, press the button again.

234

3-2. Using the audio system

Repeat play

■ Repeating a file

Press

(RPT) or

that corresponds to “RPT”.

To cancel, press the same button until “OFF” is displayed.

■ Repeating all of the files in a folder

Type A: Press and hold

(RPT) until you hear a beep.

Type B and C: Press

that corresponds to “RPT” twice.

To cancel, press the same button until “OFF” is displayed.

■ Repeating all of the files in a disc (type B only) that corresponds to “RPT” three times.

Press

To cancel, press the same button again.

Switching the display

Press

or

is pressed, the display changes in the following

Type A: Each time order: Folder no./File no./Elapsed time → Folder name → File name → Album title (MP3 only) → Track title → Artist name.

is pressed, the display changes in the fol-

Type B and C: Each time lowing order: Track title → Track title/Artist name → Track title/Album name → Track title/Elapsed time.

235

3-2. Using the audio system

■Display →P. 228

■Error messages

“CD CHECK”: This indicates a problem either with the CD or inside the player. The CD may be dirty, damaged or inserted up-side down.

“WAIT” or “PLEASE WAIT”: Operation has stopped due to a high tempera- ture inside the player. Wait for a while and then

press dealer if the CD still cannot be played.

or

. Contact your Toyota

■Discs that can be used

→P. 229

■CD player protection feature

→P. 229

■If CDs are left inside the CD player or in the ejected position for

extended periods →P. 229

■Lens cleaners

→P. 229

236

3-2. Using the audio system

■MP3 and WMA files

MP3 (MPEG Audio LAYER3) is a standard audio compression format. Files can be compressed to approximately 1/10 of their original size by using MP3 compression. WMA (Windows Media TM Audio) is a Microsoft audio compression format. This format compresses audio data to a size smaller than that of the MP3
format. There is a limit to the MP3 and WMA file standards and to the media/formats recorded by them that can be used. ●MP3 file compatibility

• Compatible standards

MP3 (MPEG1 LAYER3, MPEG2 LSF LAYER3)

• Compatible sampling frequencies

MPEG1 LAYER3: 32, 44.1, 48 (kHz) MPEG2 LSF LAYER3: 16, 22.05, 24 (kHz)

• Compatible bit rates

MPEG1 LAYER3: 64, 80, 96, 112, 128, 160, 192, 224, 256, 320 (kbps) MPEG2 LSF LAYER3: 64, 80, 96, 112, 128, 144, 160 (kbps) * Compatible with VBR

• Compatible channel modes: stereo, joint stereo, dual channel and

monaural

●WMA file compatibility

• Compatible standards

WMA Ver. 7, 8, 9

• Compatible sampling frequencies

32, 44.1, 48 (kHz)

• Compatible bit rates

Ver. 7, 8: CBR 48, 64, 80, 96, 128, 160, 192 (kbps) Ver. 9: CBR 48, 64, 80, 96, 128, 160, 192, 256, 320 (kbps) * Only compatible with 2-channel playback

237

3-2. Using the audio system

●Compatible media

Media that can be used for MP3 and WMA playback are CD-Rs and CD- RWs. Playback in some instances may not be possible, depending on the status of the CD-R or CD-RW. Playback may not be possible or the audio may jump if the disc is scratched or marked with fingerprints.

●Compatible disc formats

The following disc formats can be used. • Disc formats: CD-ROM Mode 1 and Mode 2

CD-ROM XA Mode 2, Form 1 and Form 2
• File formats: ISO9660 Level 1, Level 2, (Romeo, Joliet)

MP3 and WMA files written in any format other than those listed above may not play correctly, and their file names and folder names may not be displayed correctly.

Items related to standards and limitations are as follows. • Maximum directory hierarchy: 8 levels • Maximum length of folder names/file names: 32 characters • Maximum number of folders: 192 (including the root) • Maximum number of files per disc: 255

●File names

The only files that can be recognized as MP3/WMA and played are those with the extension .mp3 or .wma.

●Multi-sessions

As the audio system is compatible with multi-sessions, it is possible to play discs that contain MP3 and WMA files. However, only the first session can be played.

●ID3 and WMA tags

ID3 tags can be added to MP3 files, making it possible to record the track title and artist name, etc. The system is compatible with ID3 Ver. 1.0, 1.1, and Ver. 2.2, 2.3 ID3 tags. (The number of characters is based on ID3 Ver. 1.0 and 1.1.) WMA tags can be added to WMA files, making it possible to record the track title and artist name in the same way as with ID3 tags.

238

3-2. Using the audio system

●MP3 and WMA playback

When a disc containing MP3 or WMA files is inserted, all files on the disc are first checked. Once the file check is finished, the first MP3 or WMA file is played. To make the file check finish more quickly, we recommend you do not write in any files other than MP3 or WMA files or create any unnec- essary folders. If the discs contain a mixture of music data and MP3 or WMA format data, only music data can be played.

●Extensions

If the file extensions .mp3 and .wma are used for files other than MP3 and WMA files, they will be mistakenly recognized and played as MP3 and WMA files. This may result in large amounts of interference and damage to the speakers.

●Playback

• To play MP3 files with steady sound quality, we recommend a fixed bit

rate of 128 kbps and a sampling frequency of 44.1 kHz.

• CD-R or CD-RW playback may not be possible in some instances,

depending on the characteristics of the disc.

• There is a wide variety of freeware and other encoding software for MP3 and WMA files on the market, and depending on the status of the encoding and the file format, poor sound quality or noise at the start of playback may result. In some cases, playback may not be possible at all.

• When files other than MP3 or WMA files are recorded on a disc, it may take more time to recognize the disc. In some cases, playback may not be possible at all.

• Microsoft, Windows, and Windows Media are the registered trade-

marks of Microsoft Corporation in the U.S. and other countries.

NOTICE

■CDs and adapters that cannot be used (→P. 230) ■CD player precautions (→P. 231)

239

3-2. Using the audio system Operating an iPod® player∗

Connecting an iPod® player enables you to enjoy music from the vehicle speakers. ■ Connecting an iPod® player STEP 1

Open the cover and connect iPod® player using an an iPod® cable.

STEP 2

Press

■ Control panel

Power

Volume

Selector knob

Fast- forwarding and reversing

240

Playback

Selector buttons

Playback/ pause

Displaying text messages

∗: If equipped

3-2. Using the audio system

Selecting a play mode

STEP 1

Press menu mode.

that corresponds to “BROWSE” to select iPod®

STEP 2

Press

that corresponds to the desired play mode.

Second selection

Third selection

Fourth selection

■ Play mode list

Play mode

PLIST

First

selection

Playlist select

ARTIST

Artist select

ALBUM

Albums select

Songs select Albums select Songs select

GENRE

Genre select

Artists select

SONGS

PODCST

COMPSR

BOOK

Songs select Albums select Composers select Songs select

Songs select Albums select

Songs select

Albums select

Songs select

Songs select

Depending on the model, the name of your iPod® may be displayed at the top of the list.

241

3-2. Using the audio system

■ Selecting a list

STEP 1

Turn

to display the first selection list.

STEP 2

Press

to select the desired item.

that corresponds to “MORE” changes to the second

Pressing selection list. Repeat the same procedure to select the desired song name.

STEP 3

To return to the previous selection list, press

that corresponds

to “

”.

Selecting songs from a song list

STEP 1

Press The current playlist is displayed.

that corresponds to “LIST”.

STEP 2

Turning

to select the desired song.

returns the screen from list display to the previous

Press

screen.

242

3-2. Using the audio system

Selecting songs

Turn

or press “∧” or “∨” on

to select the desired song.

Playing and pausing songs

Press

Fast-forwarding and reversing songs

Press and hold “∧” or “∨” on

Shuffle playback

■ Playing songs from one playlist or album in random order

Press To cancel, press the button twice.

that corresponds to “RDM”.

■ Playing songs from all the playlists or albums in random order

Press To cancel, press the button again.

that corresponds to “RDM” twice.

Repeat play

Press

that corresponds to “RPT”.

To cancel, press the button again. Even when the repeat play option has not been selected, playback will automatically continue from the first song in the current play list once the last song has ended.

243

3-2. Using the audio system

Switching the display

Press

Each time is pressed, the display changes in the following order: Track title → Track title/Artist name → Track title/Album name → Track title/Elapsed time

■About iPod®

iPod® is registered trademarks of Apple computer, Inc.

■iPod® player functions

●When an iPod® player is connected and the audio source is changed to iPod® player mode, the iPod® player will resume play from the same point in which it was last used.

●Depending on the iPod® player that is connected to the system, certain functions may not be available. Disconnecting the device and reconnect- ing it once again may resolve some malfunctions.

■iPod® player problems

To resolve most problems encountered when using your iPod® player, dis- connect your iPod® player from the vehicle iPod® player connection and reset it. For instructions on how to reset your iPod® player, refer to your iPod® player Owner's Manual.

■Cable pass-through

→P. 323

■Error messages “IPOD ERROR”:

“NO SONGS”:

This indicates a problem in the iPod® player, inside the USB box or the connection between them. This indicates that there is no music data in the iPod® player.

“UPDATE YOUR IPOD”: This indicates that the version of the iPod® player

is not compatible.

244

3-2. Using the audio system

■Compatible models

●iPod® 5th generation Version 1.2 or later ●iPod® nano 3rd generation Version 1.0 or later ●iPod® nano 2nd generation Version 1.1.2 or later ●iPod® nano Version 1.2 or later ●iPod® touch Version 1.1 or later ●iPod® classic Version 1.0 or later iPhone®, iPod® mini, iPod® shuffle, iPod® photo and 4th generation and ear- lier models of iPod® are not compatible with this system. Items related to standards and limitations are as follows: ●Maximum number of lists in device: 9999
●Maximum number of songs in device: 65,025
●Maximum number of songs per list: 65,025

CAUTION

■Caution while driving

Do not connect iPod® players or operate the controls.

NOTICE

■To prevent damage to iPod® players

●Do not leave iPod® players in the vehicle. The temperature inside may

become high, resulting in damage to the player.

●Do not push down on or apply unnecessary pressure to the iPod® player while it is connected as this may damage the iPod® player or its terminal. ●Do not insert foreign objects into the port as this may damage the iPod®

player or its terminal.

245

3-2. Using the audio system Operating a USB memory player∗

Connecting a USB memory player enables you to enjoy music from the vehicle speakers. ■ Connecting a USB memory player STEP 1

Open the cover and connect a USB memory player.

STEP 2

Press

■ Control panel

Power

Volume

Selecting a folder and files

Selector knob

Fast-forwarding and reversing

Selector buttons

Searching playback

Playback/ pause

Playback

Displaying text messages

246

∗: If equipped

3-2. Using the audio system

Selecting and scanning a folder

■ Selecting a folder Press “∧” or “∨” on

to select the desired folder.

■ Returning to the first file of the first folder

Press and hold “∨” on

until you hear a beep.

■ Scanning the first file of all the folders

STEP 1

Press and hold

until you hear a beep.

The first ten seconds of the first file in each folder will be played.

STEP 2

When the desired folder is reached, press

again.

Selecting and scanning files

■ Selecting a file

Turn

or press “∧” or “∨” on

to select the desired file.

■ Scanning the files in a folder

Press

The first ten seconds of each file will be played.

To cancel, press

again.

When the desired file is reached, press

again.

247

3-2. Using the audio system

Playing and pausing files

Press

Fast-forwarding and reversing files

Press and hold “∧” or “∨” on

Random playback

■ Playing files from a folder in random order

Press

that corresponds to “RDM”.

To cancel, press the button twice.

■ Playing all the files from a USB memory player in random

order Press To cancel, press the button again.

that corresponds to “RDM” twice.

Repeat play

■ Repeating a file

Press

that corresponds to “RPT”.

To cancel, press the button twice.

■ Repeating all the files in a folder

Press

that corresponds to “RPT” twice.

To cancel, press the button again.

248

3-2. Using the audio system

Switching the display

Press

Each time is pressed, the display changes in the following order: Track title → Track title/Artist name → Track title/Album name → Track title/Elapsed time

■USB memory player functions

Depending on the USB memory player that is connected to the system, cer- tain functions may not be available. Disconnecting the device and recon- necting it once again may resolve some malfunctions.

■Cable pass-through

→P. 323

■Error messages

“USB ERROR”: This indicates a problem either in the USB memory player or

“NO MUSIC”:

inside the USB box or connection between them. This indicates that no MP3/WMA files are included in the USB memory player.

249

3-2. Using the audio system

■USB memory player ●Compatible device

USB memory players that can be used for MP3 and WMA playback. Depending on the type of USB device, playback may not be possible.

●Compatible device formats

The following device formats can be used: • USB communication formats: USB2.0 FS (12 mbps) • File formats: FAT16/32 (Windows) • Correspondence class: Mass storage class

MP3 and WMA files written in any format other than those listed above may not play correctly, and their file names and folder names may not be displayed correctly.

Items related to standards and limitations are as follows: • Maximum directory hierarchy: 8 levels • Maximum number of folder in device: 999 (including the root) • Maximum number of files in device: 65,025
• Maximum number of files per folder: 255

●MP3 and WMA files MP3 (MPEG Audio LAYER 3) is a standard audio compression format. Files can be compressed to approximately 1/10 of their original size using MP3 compression. WMA (Windows MediaTM Audio) is a Microsoft audio compression format. This format compresses audio data to a size smaller than that of the MP3
format. There is a limit to the MP3 and WMA file standards that can be used and to the media/formats on which the files are recorded.

250

3-2. Using the audio system

●MP3 file compatibility

• Compatible standards

MP3 (MPEG1 AUDIO LAYERII, III, MPEG2 AUDIO LAYERII, III, MPEG2.5)

• Compatible sampling frequencies

MPEG1 AUDIO LAYERII, III: 32, 44.1, 48 (kHz) MPEG2 AUDIO LAYERII, III: 16, 22.05, 24 (kHz) MPEG2.5: 8, 11.025, 12 (kHz)

• Compatible bit rates (compatible with VBR) MPEG1 AUDIO LAYERII, III: 32-320 (kbps) MPEG2 AUDIO LAYERII, III: 32-160 (kbps) MPEG2.5: 32-160 (kbps)

• Compatible channel modes: stereo, joint stereo, dual channel and

monaural

●WMA file compatibility

• Compatible standards

WMA Ver. 9

• Compatible sampling frequencies HIGH PROFILE 32, 44.1, 48 (kHz)

• Compatible bit rates

HIGH PROFILE 32-320 (kbps, VBR)

●File names

The only files that can be recognized as MP3/WMA and played are those with the extension .mp3 or .wma.

●ID3 and WMA tags

ID3 tags can be added to MP3 files, making it possible to record the track title, artist name, etc. The system is compatible with ID3 Ver. 1.0, 1.1, and Ver. 2.2, 2.3, 2.4 ID3
tags. (The number of characters is based on ID3 Ver. 1.0 and 1.1.) WMA tags can be added to WMA files, making it possible to record the track title and artist name in the same way as with ID3 tags.

●MP3 and WMA playback

When a device containing MP3 or WMA files is plugged, all files in the USB memory device are first checked. Once the file check is finished, the first MP3 or WMA file is played. To make the file check finish more quickly, we recommend you do not write in any files other than MP3 or WMA files or create any unnecessary folders.

251

3-2. Using the audio system

●Extensions

If the file extensions .mp3 and .wma are used for files other than MP3 and WMA files, they will be mistakenly recognized and played as MP3 and WMA files. This may result in large amounts of interference and damage to the speakers.

●Playback

• To play MP3 file with steady sound quality, we recommend a fixed bit

rate of at least 128 kbps and a sampling frequency of 44.1 kHz.

• There is a wide variety of freeware and other encoding software for MP3 and WMA files on the market, and depending on the status of the encoding and the file format, poor sound quality or noise at the start of playback may result. In some cases, playback may not be possible at all.

• Microsoft, Windows, and Windows Media are the registered trade-

marks of Microsoft Corporation in the U.S.A. and other countries.

CAUTION

■Caution while driving

Do not use a USB memory player, or connect a USB memory player.

NOTICE

■To prevent damage to a USB memory player

●Do not leave a USB memory player in the vehicle. The temperature inside

may become high, resulting in damage to the player.

●Do not push down on or apply unnecessary pressure to the USB memory player while it is connected as this may damage the USB memory player or its terminal.

●Do not insert foreign objects into the port as this may damage the USB

memory player or its terminal.

252

3-2. Using the audio system Optimal use of the audio system

Type A

Adjusting the sound quality and ASL

Type B and C

Adjusting the sound quality

Menu button

Selector buttons

253

3-2. Using the audio system

Using the audio control function

■ Changing sound quality modes

Type A

selects the mode to be changed in the following

Pressing order: “BAS”→“TRE”→“FAD”→“BAL”→“ASL” Type B and C

STEP 1

Press

STEP 2

Press “BASS”, “MID” (type B only), “TREB”, “FADE”, or “BAL”

that corresponds to the desired mode.

■ Adjusting sound quality

Turning

or

adjusts the level.

Type A

Mode displayed

BAS TRE

FAD

BAL

Sound qual-

ity mode Bass* Treble* Front/rear volume balance Left/right volume balance

Level

-5 to 5
-5 to 5

Turn to the

left

Turn to the

right

Low

High

F7 to R7

Shifts to rear

Shifts to

front

L7 to R7

Shifts to left Shifts to right

*: The sound quality level is adjusted individually in each radio

mode or CD mode.

254

3-2. Using the audio system

Type B and C

Mode displayed

BASS

MID

TREB

FADE

BAL

Sound qual-

ity mode Bass*

Mid-range* (type B only)

Treble* Front/rear volume balance Left/right volume balance

Turn to the

left

Turn to the

right

Low

High

Level

-5 to 5

-5 to 5

-5 to 5

F7 to R7

Shifts to rear

Shifts to

front

L7 to R7

Shifts to left Shifts to right

*: The sound quality level is adjusted individually in each audio

mode.

■ Adjusting the Automatic Sound Levelizer (ASL)

Type A

When “ASL” is selected, turning

to the right changes the

“ASL” level in the order of “LOW”, “MID” and “HIGH”.

Turning

to the left turns “ASL” off.

ASL automatically adjusts the volume and tone quality according to vehi- cle speed.

255

3-2. Using the audio system

Type B and C

STEP 1

Press

STEP 2

Press

that corresponds to “MORE”.

STEP 3

Press

that corresponds to “ASL”.

that corresponds to the desired mode.

Press

STEP 4
Type B: “ON” or “OFF” Type C: “LOW”, “MID”, “HIGH”, or “OFF”

ASL automatically adjusts the volume and tone quality according to vehi- cle speed.

■ Setting the number of preset pages (type B and C) The number of preset pages desired can be set from 1 to 6. The initial setting is 6 pages.

STEP 1

Press

STEP 2

STEP 3

STEP 4

Press Press Press pages.

that corresponds to “MORE”. that corresponds to “PRESET”. that corresponds to the desired number of preset

■ Language settings (type B and C)

→P. 213

256

3-2. Using the audio system

■Trademark owned by SRS Labs, Inc. (type A only)

The audio systems utilize SRS FOCUS® and SRS TruBass® audio enhancement technologies, under license from SRS Labs, Inc., in all modes except AM radio mode.

FOCUS, TruBass, SRS and Inc. FOCUS and TruBass technologies are incorporated under license from SRS Labs, Inc.

symbols are trademarks of SRS Labs,

257

3-2. Using the audio system Using the AUX adapter

This adapter can be used to connect a portable audio device and lis- ten to it through the vehicle’s speakers. STEP 1

Open the cover and connect the portable audio device.

Type A

Type B

STEP 2

Press

or

258

3-2. Using the audio system

■Operating portable audio devices connected to the audio system

The volume can be adjusted using the vehicle's audio controls. All other adjustments must be made on the portable audio device itself.

■When using a portable audio device connected to the power outlet

Noise may occur during playback. Use the power source of the portable audio device.

■Cable pass-through

→P. 323

259

3-2. Using the audio system Using the steering wheel audio switches

Some audio features can be controlled using the switches on the steering wheel.

4-spoke steering wheel

vol-

Increases/decreases ume Radio mode: Select radio stations CD mode: Select tracks, files (MP3 and WMA) and discs iPod® player mode: Selects a song

USB memory player mode: file and

Selects a folder

Bluetooth® audio mode:

Selects a track and album

Turn the power on, selects an audio source

3-spoke steering wheel

260

3-2. Using the audio system

Turning the power on

Press

or

when the audio system is turned off.

The audio system can be turned off by holding the switch down until you hear a beep.

Changing the audio source

or

when the audio system is turned on. The

Press audio source changes as follows each time the switch is pressed. If no discs are inserted in the player, that mode will be skipped. Type A:

FM1→FM2→CD→AUX→AM→SAT1→SAT2→SAT3

Type B and C:

FM→SAT→CD→CD changer (type B only)→Bluetooth® Audio→AUX→ USB/iPod®→AM

Adjusting the volume

Press “+” on decrease the volume.

or

to increase the volume and “-” to

Press and hold the switch to continue increasing or decreasing the vol- ume.

Selecting a radio station

STEP 1

STEP 2

Press Press “∨” or “∧” on

or

to select the radio mode.

or

to select a radio station.

To scan for receivable stations, press and hold “∨” or “∧” on

or

until you hear a beep.

261

3-2. Using the audio system

Selecting a track/file or folder

STEP 1

STEP 2

or

Press memory player mode. Press “∨” or “∧” on track/file or folder.

Selecting a folder

to select the CD, iPod® player or USB

or

to select the desired

STEP 1

STEP 2

or

Press Press and hold “∨” or “∧” on beep.

to select the MP3 and WMA mode.

or

until you hear a

Selecting a disc in the CD player (CD player with changer only)

STEP 1

STEP 2

or

Press Press and hold “∨” or “∧” on beep.

to select the CD mode.

or

until you hear a

CAUTION

■To reduce the risk of an accident

Exercise care when operating the audio switches on the steering wheel.

262

3-3. Using the Bluetooth® audio system Bluetooth® audio system∗

The Bluetooth® audio system enables you to enjoy music played on a portable digital audio player (portable player) from the vehicle speakers via wireless communication. This audio system supports Bluetooth®, a wireless data system capable of playing portable audio music without cables. If your por- table player does not support Bluetooth®, the Bluetooth® audio sys- tem will not function. Owners of models equipped with a navigation system should refer to the “Navigation System Owner's Manual”.

Title

Using the Bluetooth® audio system Operating a Bluetooth® enabled portable player Setting up a Bluetooth® enabled portable player Bluetooth® audio system setup

Page P. 266
P. 271
P. 273
P. 278

■Conditions under which the system will not operate

●If using a portable player that does not support Bluetooth® ●If the portable player is switched off ●If the portable player is not connected ●If the portable player’s battery is low ●If the portable player is behind the seat or in the glove box or console box ●If metal is covering or touching the portable player

∗: If equipped 263

3-3. Using the Bluetooth® audio system

■When transferring ownership of the vehicle

Be sure to initialize the system to prevent personal data from being improp- erly accessed. (→P. 303)

■About Bluetooth®

Bluetooth is a registered trademark of Bluetooth SIG. Inc.

■Compatible models

●Bluetooth® specifications:

Ver. 1.2

●Following Profiles:

• A2DP (Advanced Audio Distribution Profile) Ver. 1.0
• AVRCP (Audio/Video Remote Control Profile) Ver. 1.0 or higher (Ver.

1.3 or higher recommended)

Portable players must correspond to the above specifications in order to be connected to the Bluetooth® audio system. However, please note that some functions may be limited depending on the type of portable player.

■Certification for the Bluetooth® audio system

Type B

FCC ID: BABFT0001A IC ID: MADE IN JAPAN

2024B-FT0001A

Type C

216J-C5ZZZ035

FCC ID: ACJ932C5ZZZ035
IC ID: MADE IN JAPAN This device complies with Part 15 of the FCC Rules and RSS-210 Rules. Operation is subject to the following two conditions; (1) This device may not cause harmful interference, and (2) This device must accept any interfer- ence received, including interference that may cause undesired operation.

264

3-3. Using the Bluetooth® audio system

CAUTION

■FCC WARNING

Changes or modifications in construction not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Radio frequency exposure. This device is approved for Mobile Application only and, to comply with applicable FCC radio frequency exposure regula- tions, must be used with a distance of at least 7.9 in. (20 cm) between the antenna and the body of any person at all time during use.

■Caution while driving

Do not connect portable players or operate the controls.

NOTICE

■To prevent damage to portable players

Do not leave portable players in the vehicle. The temperature inside the vehicle may become high, resulting in damage to the player.

265

3-3. Using the Bluetooth® audio system Using the Bluetooth® audio system

■ Audio unit

Display A message, name, number, etc. is displayed.

Lower-case characters and special characters cannot be displayed.

Displays information that is too long to be displayed at one time on the display (press and hold) Selects items such as menu and number Turn: Selects an item Press: Inputs the selected item Bluetooth® connection con- dition

If “BT” is not displayed, the Bluetooth® audio system cannot be used.

■ Microphone

266

3-3. Using the Bluetooth® audio system

Operating the system using voice commands

By following voice guidance instructions output from the speaker, voice commands enable to the operation of the Bluetooth® audio sys-

tem without the need to check the display or operate

■ Operation procedure when using voice commands

Press the talk switch and follow voice guidance instructions.

■ Auxiliary commands when using voice commands

The following auxiliary commands can be used when operating the system using a voice command: “Cancel”: Exits the Bluetooth® audio system “Repeat”: Repeats the previous voice guidance instruction “Go back”: Returns to the previous procedure “Help”: Reads aloud the function summary if a help comment is registered for the selected function

267

3-3. Using the Bluetooth® audio system

Using the Bluetooth® audio system for the first time

Before using the Bluetooth® audio system, it is necessary to register a Bluetooth® enabled portable player in the system. Follow the proce- dure below to register (pair) a portable player:

STEP 1

Press

until “BT AUDIO” is displayed.

Press

that corresponds to “SETUP”.

STEP 2
The introductory guidance and portable player name registration instructions are heard.

STEP 3

Select “Pair Audio Player” using a voice command or