381
4-3. Do-it-yourself maintenance
Fuse
Ampere
Circuit
11 PWR
12 DOOR NO.2
13 S/ROOF
14 TAIL
25 A 25 A 30 A
15 A
15 PANEL
7.5 A
16 ECU IG NO.1
10 A
17 ECU IG NO.2
7.5 A
18 A/C NO.2
19 WASH
20 S-HTR
21 GAUGE NO.1
22 WIP
23 H-LP LVL
24
INJ
10 A
10 A 20 A 10 A 25 A 7.5 A 15 A
Power windows Main body ECU Moon roof Front side marker/parking lights, stop/tail lights, rear side marker lights, license plate lights, front turn signal lights, main body ECU Navigation system, seat heaters, emergency flashers, air condition- ing system, audio system, clock, glove box light, instrument panel lights, steering switches, rear win- dow defogger Main body ECU, electric moon roof, tire pressure warning system, auto anti-glare inside rear view mir- ror, starting system, navigation sys- tem Electronically controlled brake sys- tem, electric power steering sys- tem, shift lock control system Air conditioning system, rear win- dow defogger Windshield wipers and washer Seat heaters Emergency flashers, back-up lights Windshield wipers and washer No circuit No circuit
382
4-3. Do-it-yourself maintenance
Fuse
Ampere
Circuit
25
IGN
10 A
26 GAUGE NO.2
27 ECU-ACC
28 CIG
29 PWR OUTLET
30 RADIO NO.2
31 MIR HTR
32 POWER
33 P/SEAT
7.5 A
7.5 A
20 A 20 A 7.5 A 10 A 30 A 30 A
Multiport fuel injection system/ sequential multiport fuel injection system, SRS airbag system, steer- ing lock system, front passenger occupant classification system, smart key system, electronic throt- tle control system Gauges and meters, clock Clock, main body ECU, shift lock control system, outside rear view mirrors, smart key system No circuit Power outlet Audio system, navigation system Outside rear view mirror defoggers Power windows Power seat
n After a fuse is replaced
If the lights do not turn on even after the fuse has been replaced, a bulb may need replacing. (→P. 385) If the replaced fuse blows again, have the vehicle inspected by your Toyota dealer.
n If there is an overload in the circuits
The fuses are designed to blow, protecting the wiring harness from damage.
383
4-3. Do-it-yourself maintenance
CAUTION
n To prevent system breakdowns and vehicle fire
Observe the following precautions. Failing to do so may cause damage, and possibly a fire or injury. l Never use a fuse of a higher amperage rating than indicated, or use any
other object in place of a fuse.
l Always use a genuine Toyota fuse or equivalent.
Never replace a fuse with a wire, even as a temporary fix. This can cause extensive damage or even fire.
l Do not modify the fuse or the fuse box.
NOTICE
n Before replacing fuses
Have the cause of electrical overload determined and repaired by your Toyota dealer, as soon as possible.
384
4-3. Do-it-yourself maintenance Light bulbs
You may replace the following bulbs yourself. The difficulty level of replacement varies depending on the bulb. If necessary bulb replacement seems difficult to perform, contact your Toyota dealer. For more information about replacing other light bulbs, contact your Toyota dealer. n Prepare a replacement light bulb.
Check the wattage of the light bulb being replaced. (→P. 458)
n Bulb locations
Headlight high beam and daytime running light
Rear turn signal light
Headlight low beam
385
4-3. Do-it-yourself maintenance
Replacing light bulbs
n Headlights and daytime running lights
STEP 1
Turn the bulb base counterclock- wise.
Headlight (low beam) Headlight (high beam) and daytime running light
Unplug depressing the lock release.
the connector while
Headlight (low beam) Headlight (high beam) and daytime running light
STEP 2
386
4-3. Do-it-yourself maintenance
n Rear turn signal lights
STEP 1
Open the trunk lid and remove the cover.
STEP 2
Turn the bulb bases counter- clockwise.
STEP 3
Remove the light bulb.
387
4-3. Do-it-yourself maintenance
n Lights other than the above
If any of the lights listed below has burnt out, have it replaced by your Toyota dealer. l Front fog lights (if equipped) l Front turn signal lights l High mounted stoplight l Front side marker/parking lights l Stop/tail lights l Back-up lights l License plate lights l Rear side marker lights
n Condensation build-up on the inside of the lens
Contact your Toyota dealer for more information in the following situations. Temporary condensation build-up on the inside of the headlight lens does not indicate a malfunction. l Large drops of water have built up on the inside of the lens. l Water has built up inside the headlight.
n LED stop/tail lights and high mounted stoplight
The stop/tail lights and high mounted stoplight consists of a number of LEDs. If any of the LEDs burn out, take your vehicle to your Toyota dealer to have the light replaced.
388
4-3. Do-it-yourself maintenance
CAUTION
n Replacing light bulbs
l Turn off the headlights. Do not attempt to replace the bulb immediately
after turning off the headlights. The bulbs become very hot and may cause burns.
l Do not touch the glass portion of the light bulb with bare hands. Hold the
bulb by the plastic or metal portion. If the bulb is scratched or dropped it may blow out or crack.
l Fully install light bulbs and any parts used to secure them. Failing to do so may result in heat damage, fire, or water entering the headlight unit. This may damage the headlights or cause condensation to build up on the lens.
n To prevent damage or fire
Make sure bulbs are fully seated and locked.
389
4-3. Do-it-yourself maintenance
390
5-1. Essential information Emergency flashers
Use the emergency flashers if the vehicle malfunctions or is involved in an accident.
Press the switch to flash all the turn signal lights. To turn them off, press the switch once again.
NOTICE
n To prevent battery discharge
Do not leave the emergency flashers on longer than necessary when the hybrid system is not operating.
392
5-1. Essential information If your vehicle needs to be towed
If towing is necessary, we recommend having your vehicle towed by your Toyota dealer or a commercial towing service, using a lift-type truck or a flat bed truck. Use a safety chain system for all towing, and abide by all state/pro- vincial and local laws. If towing from the front, the vehicle's rear wheels and axles must be in good condition. (→P. 394) If they are damaged, use a towing dolly or flat bed truck.
Before towing
The following may indicate a problem with your transmission. Contact your Toyota dealer before towing. l The hybrid system is operating, but the vehicle will not move. l The vehicle makes an abnormal sound.
393
5-1. Essential information
Towing with a sling-type truck
NOTICE
n To prevent body damage
Do not tow with a sling-type truck, either from the front or rear.
Towing with a wheel-lift type truck from the front
Release the parking brake.
NOTICE
n To prevent damaging the vehicle
When raising the vehicle, ensure adequate ground clearance for towing at the opposite end of the raised vehicle. Without adequate clearance, the vehicle could be damaged while being towed.
394
5-1. Essential information
Towing with a wheel-lift type truck from the rear
Use a towing dolly under the front wheels.
NOTICE
n To prevent causing serious damage to the transmission
Never tow this vehicle from the rear with the front wheels on the ground.
Using a flat bed truck
If you use chains or cables to tie down your vehicle, the angles shaded in black must be 45°. Do not overly tighten the tie downs or the vehicle may be damaged.
395
5-1. Essential information If you think something is wrong
If you notice any of the following symptoms, your vehicle probably needs adjustment or repair. Contact your Toyota dealer as soon as possible. n Visible symptoms
l Fluid leaks under the vehicle
(Water dripping from the air conditioning after use is normal.)
l Flat-looking tires or uneven tire wear l Engine coolant temperature gauge needle continually points
higher than normal n Audible symptoms
l Changes in exhaust sound l Excessive tire squeal when cornering l Strange noises related to the suspension system l Pinging or other noises related to the hybrid system
n Operational symptoms
l Engine missing, stumbling or running rough l Appreciable loss of power l Vehicle pulls heavily to one side when braking l Vehicle pulls heavily to one side when driving on a level road l Loss of brake effectiveness, spongy feeling, pedal almost
touches the floor
396
5-1. Essential information Event data recorder
Your vehicle has computers that monitor and control certain aspects of your vehicle. These computers assist in driving and maintaining optimal vehicle performance. Besides storing data useful for troubleshooting, there is an event data recorder (EDR) that records data in a crash or a near car crash event.
In a crash or a near car crash event
The SRS airbag sensor assembly contains the EDR. In a crash or a near car crash event, this device may record some or all of the follow- ing information: l Gasoline engine speed l Whether the brake pedal was applied or not l Vehicle speed l To what extent the accelerator pedal was depressed l Position of the transmission shift lever l Whether the driver and front passenger wore seat belts or not l Driver's seat position l Front passenger’s occupant classification l SRS airbag deployment data l SRS airbag system diagnostic data l Front passenger’s occupant classification The information above is intended to be used for the purpose of improving vehicle safety performance. Unlike general data recorders, the EDR does not record sound data such as conversation between passengers.
397
5-1. Essential information
Disclosure of the data
Toyota will not disclose the data recorded in an EDR to a third party except when: l An agreement from the vehicle's owner (or the leasing company for
a leased vehicle) is obtained
l Officially requested by the police or other authorities l Used as a defense for Toyota in a law suit l Ordered by a court law However, if necessary Toyota will: l Use the data for research on Toyota vehicle safety performance l Disclose the data to a third party for research purposes without dis- closing details of the vehicle owner, and only when it is deemed necessary
l Disclose summarized data cleared of vehicle identification informa-
tion to a non-Toyota organization for research purposes
398
5-2. Steps to take in an emergency If a warning light turns on or a warning buzzer sounds...
Calmly perform the following actions if any of the warning lights turn on or flash. If a light turns on or flashes, but then turns off, this does not necessarily indicate a malfunction in the system.
Stop the vehicle immediately. Continuing to drive the vehicle may be dangerous.
The following warning indicates a possible problem in the brake sys- tem. Immediately stop the vehicle in a safe place and contact your Toyota dealer.
Warning light
Warning light/Details
Brake system warning light (red indicator) and warning buzzer* • Low brake fluid • Malfunction in the electronically controlled brake system This light also comes on when the parking brake is not released. If the light turns off after the parking brake is fully released the system is operating normally.
(U.S.A.)
(Canada)
*: Parking brake engaged warning buzzer: The buzzer sounds to indicate that the parking brake is still engaged (with the vehicle having reached a speed of 3 mph [5 km/h]).
Stop the vehicle immediately.
The following warning indicates the possibility of damage to the vehi- cle that may lead to an accident. Immediately stop the vehicle in a safe place and contact your Toyota dealer.
Warning light
Warning light/Details
Charging system warning light Indicates a malfunction in the vehicle’s charging system.
399
5-2. Steps to take in an emergency
Have the vehicle inspected immediately.
Failing to investigate the cause of the following warnings may lead to the system operating abnormally and possibly cause an accident. Have the vehicle inspected by your Toyota dealer immediately.
Warning light
Warning light/Details
Malfunction indicator lamp Indicates a malfunction in: • The hybrid system; • The electronic engine control system; • The electronic throttle control system; or • The transmission control system.
(U.S.A.)
(Canada)
SRS warning light Indicates a malfunction in: • The SRS airbag system; • The front passenger occupant classification system; or • The seat belt pretensioner system.
ABS warning light Indicates a malfunction in: • ABS; or • The brake assist system.
(U.S.A.)
(Canada)
Brake system warning light (yellow indicator) Indicates a malfunction in: • The regenerative braking system; or • The electronically controlled brake system. Electric power steering warning light Indicates a malfunction in the EPS (Electric Power Steering) system.
400
5-2. Steps to take in an emergency
n If the malfunction indicator lamp comes on while driving
First check the following: Is the fuel tank empty? If it is, fill the fuel tank immediately. Is the fuel tank cap loose? If it is, tighten it securely.
The light will go off after taking several driving trips. If the light does not go off even after several trips, contact your Toyota dealer as soon as possible.
n Brake system warning light operation
The following does not indicate a malfunction: l After the hybrid system is turned on, the red and yellow brake system
warning lights may stay on for about 60 seconds.
l Depressing the brake pedal repeatedly may turn on the red brake system
warning light and buzzer.
401
5-2. Steps to take in an emergency
Follow the correction procedures.
After taking the specified steps to correct the suspected problem, check that the warning light turns off.
Warning light
Warning light/Details
Correction procedure
Check that all doors and the trunk are closed.
Refuel the vehicle.
Fasten the seat belt.
Fasten the seat belt.
Open door warning light
(warning buzzer)*1
Indicates that a door or the
trunk is not fully closed.
Low fuel level warning
light
Indicates that remaining
fuel is about 2.5 gal. (9.8
L, 2.1 lmp. gal.) or less
Driver’s seat belt
reminder light
(warning buzzer)*2
Warns the driver to fasten
his/her seat belt.
Front passenger’s seat
belt reminder light
(warning buzzer)*2
Warns the front passen-
ger to fasten his or her
seat belt.
Tire pressure warning
light
(on the center
panel)
When the light comes on: Low tire inflation pressure.
Adjust the tire inflation pressure.
(U.S.A.)
When the light comes on after blinking for 1 minute: Malfunction in the tire pressure warning system.
Have the system checked by your Toyota dealer.
402
5-2. Steps to take in an emergency
Warning light
Warning light/Details
Correction procedure
Master warning light A buzzer sounds and the warning light comes on and flashes to indicate that the master warning system has detected a malfunc- tion.
→P. 408
*1: Open door warning buzzer:
The open door warning buzzer sounds to alert the driver that one or more of
the doors is not fully closed (with the vehicle having reached a speed of 3
mph [5 km/h]).
*2:Driver's and front passenger’s seat belt reminders:
The driver’s and front passenger’s seat belts reminder sound to alert the driver and front passenger that his or her seat belt is not fastened. The buzzer sounds intermittently for 10 seconds after the vehicle has reached a speed of at least 12 mph (20 km/h). Then, if the seat belt is still unfastened, the buzzer will sound in a different tone for 20 more seconds.
n Front passenger detection sensor and passenger seat belt reminder
If luggage is placed on the front passenger seat, the front passenger detection sensor may cause the warning light to flash, even if a passen- ger is not sitting in the seat. If a cushion is placed on the seat, the sensor may not detect a passen- ger, and the warning light may not operate properly. n When the tire pressure warning light comes on
Check the tire inflation pressure and adjust to the appropriate level. Pushing the tire pressure warning reset switch does not turn off the tire pressure warning light.
n The tire pressure warning light may turn on due to natural causes
The tire pressure warning light may turn on due to natural causes such as natural air leaks or tire inflation pressure changes caused by temper- ature. In this case, adjusting the tire inflation pressure will turn off the warning light (after a few minutes).
403
5-2. Steps to take in an emergency
n When a tire is replaced with a spare tire
The compact spare tire is not equipped with the tire pressure warning valve and transmitter. If a tire goes flat, the tire pressure warning light will not turn off even though the flat tire is replaced with the spare tire. Replace the spare tire with the repaired tire and adjust the proper tire inflation pressure. The tire pressure warning light will turn off after a few minutes.
n If the tire pressure warning system is inoperative
The tire pressure warning system will be disabled in the following condi- tions: (When the condition becomes normal, the system will work properly.)
If tires not equipped with tire pressure warning valves and transmit- ters are used. If the ID code on the tire pressure warning valves and transmitters is not registered in the tire pressure warning computer. If the tire inflation pressure is 73 psi (500 kPa, 5.1 kgf/cm2 or bar) or higher.
The tire pressure warning system may be disabled in the following condi- tions: (When the condition becomes normal, the system will work properly.)
If electronic devices or facilities using similar radio wave frequencies are nearby. If a radio set at similar frequencies is in use in the vehicle. If a window tint that affects the radio wave signals is installed. If there is a lot of snow or ice on the vehicle, in particular around the wheels or wheel housings. If non-genuine Toyota wheels are used. (Even if you use Toyota wheels, the tire pressure warning system may not work properly with some types of tires.) If tire chains are used.
n If the tire pressure warning light comes on after blinking frequently
for 1 minute
If the tire pressure warning light comes on after blinking frequently for 1
minute when the “POWER” switch is turned to ON mode, have it
checked by your Toyota dealer.
404
5-2. Steps to take in an emergency
n Customization that can be configured at Toyota dealer
The vehicle speed linked seat belt reminder buzzer can be disabled. (Customizable features →P. 474) However, Toyota recommends that the seat belt reminder buzzer be opera- tional to alert the driver and front passenger that the seat belts are not fas- tened.
CAUTION
n If the tire pressure warning light comes on
Be sure to observe the following precautions. Failure to do so could cause loss of vehicle control and result in death or serious injury. l Stop your vehicle in a safe place as soon as possible. Adjust the tire
inflation pressure immediately. If the tire pressure warning light comes on even after tire inflation pres- sure adjustment, it is probable that you have a flat tire. Check the tires. If the tire is flat, change to the spare tire and have the flat tire repaired by the nearest Toyota dealer.
l Avoid abrupt maneuvering and braking. If the vehicle tires deteriorate,
you could lose control of the steering wheel or the brakes.
n If a blowout or sudden air leakage should occur
The tire pressure warning system may not activate immediately.
405
5-2. Steps to take in an emergency
CAUTION
n Maintenance of the tires
Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label (tire and load information label). (If your vehicle has tires of a differ- ent size than the size indicated on the vehicle placard or tire inflation pressure label [tire and load information label], you should determine the proper tire inflation pressure for those tires.) As an added safety feature, your vehicle has been equipped with a tire pressure monitoring system (TPMS-tire pressure warning system) that illuminates a low tire pressure telltale (tire pressure warning light) when one or more of your tires is significantly under-inflated. Accordingly, when the low tire pressure telltale (tire pressure warning light) illumi- nates, you should stop and check your tires as soon as possible, and inflate them to the proper pressure. Driving on a significantly under- inflated tire causes the tire to overheat and can lead to tire failure. Under-inflation also reduces fuel efficiency and tire tread life, and may affect the vehicle's handling and stopping ability. Please note that the TPMS (tire pressure warning system) is not a sub- stitute for proper tire maintenance, and it is the driver's responsibility to maintain correct tire pressure, even if under-inflation has not reached the level to trigger illumination of the TPMS low tire pressure telltale (tire pressure warning light).
406
5-2. Steps to take in an emergency
CAUTION
Your vehicle has also been equipped with a TPMS (tire pressure warning system) malfunction indicator to indicate when the system is not operat- ing properly. The TPMS (tire pressure warning system) malfunction indi- cator is combined with the low tire pressure telltale (tire pressure warning light). When the system detects a malfunction, the telltale will flash for approximately one minute and then remain continuously illumi- nated. This sequence will continue upon subsequent vehicle start-ups as long as the malfunction exists. When the malfunction indicator is illumi- nated, the system may not be able to detect or signal low tire pressure as intended. TPMS (tire pressure warning system) malfunctions may occur for a vari- ety of reasons, including the installation of replacement or alternate tires or wheels on the vehicle that prevent the TPMS (tire pressure warning system) from functioning properly. Always check the TPMS (tire pres- sure warning system) malfunction telltale after replacing one or more tires or wheels on your vehicle to ensure that the replacement or alter- nate tires and wheels allow the TPMS (tire pressure warning system) to continue to function properly.
NOTICE
n Precaution when installing a different tire
When a tire of a different specification or maker is installed, the tire pres- sure warning system may not operate properly.
407
5-2. Steps to take in an emergency If a warning message is displayed
If a warning is shown on the multi-information display, stay calm and perform the following actions:
Master warning light The master warning light also comes on or flashes in order to indicate that a message is cur- rently being displayed on the multi-information display. Multi-information display
If any of the warning lights turns on again after performing the fol- lowing actions, contact your Toyota dealer.
408
5-2. Steps to take in an emergency
Stop the vehicle immediately.
l The following warning indicates the possibility of damage to the vehicle that may lead to an accident. Immediately stop the vehicle in a safe place and contact your Toyota dealer.
Warning message
Details
(U.S.A.)
(Canada)
Indicates an abnormal engine oil pressure. A buzzer also sounds. The warning light may turn on if the engine oil pressure is too low.
Indicates a malfunction in the hybrid system. A buzzer also sounds.
l The following warning indicates the possibility of damage to the vehicle that may lead to an accident. Immediately stop the vehicle in a safe place and allow the engine to cool.
Warning message
Details
Indicates that the engine coolant temperature is too high. A buzzer also sounds.
409
5-2. Steps to take in an emergency
l The following warning indicates the possibility of damage to the vehicle that may lead to an accident. Immediately stop the vehicle in a safe place and allow the power control unit and electric motor (traction motor) to cool.
Warning message
Details
Indicates that the temperature for the power control unit coolant or electric motor (traction motor) is too high. A buzzer also sounds.
Have the vehicle inspected immediately.
Failing to investigate the cause of the following warnings may lead to the system operating abnormally and possibly cause an accident. Have the vehicle inspected by your Toyota dealer immediately.
Warning message
Details
Indicates a malfunction in the steering lock sys- tem. A buzzer also sounds.
410
5-2. Steps to take in an emergency
Follow the correction procedures.
After taking the specified steps to correct the suspected problem, check that the warning light turns off.
Warning message
Details
Correction procedure
Indicates that one or more of the doors is not fully closed. A buzzer sounds to indicate that one or more of the doors is not fully closed (with the vehicle having reached a speed of 3 mph [5 km/h]).
Indicates that the trunk is not fully closed. A buzzer sounds to indicate that the trunk is not fully closed (with the vehicle having reached a speed of 3 mph [5 km/h]). Indicates that the moon roof is not fully closed (with the “POWER” switch is turned OFF and the driver's door open). A buzzer also sounds.
Make sure that all of the doors are closed.
Close the trunk.
Close the moon roof.
411
5-2. Steps to take in an emergency
Warning message
Details
Correction procedure
Indicates that the parking brake is still engaged with the vehicle having reached a speed of more than 3 mph (5 km/h). A buzzer also sounds.
Indicates that the washer fluid level is low. A buzzer also sounds.
Indicates that the engine oil is sched- uled to be changed. A buzzer also sounds. Comes on approxi- mately 4500 miles (7200 km) after the engine oil is changed. (The indicator will not work properly unless the oil maintenance data has been reset). Indicates that the engine oil should be changed. A buzzer also sounds. Comes on approxi- mately 5000 miles (8000 km) after the engine oil is changed (and the oil mainte- nance data has been reset).
Release the parking brake.
Add washer fluid.
Check the engine oil, and change if neces- sary.
Check and change the engine oil.
(U.S.A. only)
(U.S.A. only)
412
5-2. Steps to take in an emergency
Warning message
Details
Correction procedure
Indicates that the hybrid battery (trac- tion battery) is low. A buzzer also sounds.
Indicates that the transmission is not in P when attempting to start the hybrid sys- tem. A buzzer also sounds.
Stop the vehicle and shift the shift lever to P.
Shift the shift lever to P before pressing the “POWER” switch.
413
5-2. Steps to take in an emergency
n Changing the engine oil (U.S.A. only)
Make sure to reset the oil change system. (→P. 344)
Messages displayed when refueling
The following messages are displayed after the fuel lid opener is pressed. If the messages do not change or are displayed continu- ously, have the vehicle checked by your Toyota dealer.
Message
Details
Preparing the vehicle for refueling. Wait a moment.
You may commence refueling. Finish refueling within 30 minutes.
Close the fuel lid.
414
5-2. Steps to take in an emergency
Other messages
If the following message is displayed, take appropriate action and confirm that the message has disappeared.
Message
Details
The driver’s door is opened when the transmis- sion is not in P with the hybrid system on. Shift the shift lever to P. A buzzer also sounds.
Follow the correction procedures.
After taking the specified steps to correct the suspected problem, check that the warning light turns off.
Interior buzzer
Exterior buzzer
Warning message
Details
Correction procedure
Once
⎯
(Comes on for 8
seconds)
Indicates that the electronic key is not present when the “POWER” switch is pressed.
Confirm the location of the electronic key.
415
5-2. Steps to take in an emergency
Interior buzzer
Exterior buzzer
Warning message
Details
Correction procedure
Indicates that a door other than the driver’s door has been opened and closed with the “POWER” switch in any mode other than OFF and the electronic key outside of the detection area. Indicates that the driver’s door has been opened and closed with the shift lever in P, the “POWER” switch in any mode other than OFF and the electronic key outside of the detection area.
Confirm the location of the electronic key.
Turn the “POWER” switch OFF or confirm the location of the electronic key.
Once
3 times
Once
3 times
416
5-2. Steps to take in an emergency
Interior buzzer
Exterior buzzer
Warning message
Details
Correction procedure
Continuous
Continuous
(Displayed alternately)
Once
⎯
Once
⎯
Indicates that the driver’s door has been opened and closed (with the shift lever not in P, the “POWER” switch in any mode other than OFF and the electronic key outside of the detection area).
• Shift the shift lever to P. • Confirm the location of the electronic key.
Indicates that the key battery is low.
Replace the battery. (→P. 372)
Indicates that a door has been opened or closed and the “POWER” switch has been turned twice to ACCESSORY mode the “POWER” switch OFF.
Press the “POWER” switch while depressing the brake pedal.
417
5-2. Steps to take in an emergency
Interior buzzer
Exterior buzzer
Once
⎯
Once
⎯
Once
⎯
Warning message
Details
Correction procedure
Indicates that the electronic key does not operate prop- erly.
→P. 434
Indicates that the steering lock has not released within 3 seconds of pressing the “POWER” switch.
Press the “POWER” switch again while turning the steering wheel with the brake pedal depressed.
418
5-2. Steps to take in an emergency If you have a flat tire
Remove the flat tire and replace it with the spare provided. n Before jacking up the vehicle
l Stop the vehicle on a hard, flat surface. l Set the parking brake. l Shift the shift lever to P. l Stop the hybrid system. l Turn on the emergency flashers.
n Location of the spare tire, jack and tools
Jack handle
Jack
Transport eyelet (if equipped)
Wheel nut wrench
Spare tire
419
5-2. Steps to take in an emergency
Taking out the jack and spare tire
STEP 1
Remove the luggage floor cover.
STEP 2
Loosen the nut and remove it. Remove the spare tire cover. Loosen the bolt and remove it. Remove the jack tray.
STEP 3
Remove the hook.
420
5-2. Steps to take in an emergency
Replacing a flat tire
STEP 1
Chock the tires.
Flat tire
Wheel
chock posi-
tions
Front
Rear
Left- hand side
Right- hand side
Left- hand side
Right- hand side
Behind the rear right- hand side tire Behind the rear left- hand side tire In front of the front right-hand side tire In front of the front left-hand side tire
STEP 2
Slightly loosen the wheel nuts (one turn).
421
Turn the tire jack portion “A” by hand until the notch of the jack is in contact with the jack point.
Raise the vehicle until the tire is slightly raised off the ground.
Remove all the wheel nuts and the tire.
When resting the tire on the ground, place the tire so that the wheel design faces up to avoid scratching the wheel surface.
5-2. Steps to take in an emergency
STEP 3
STEP 4
STEP 5
422
Installing the tire
STEP 1
5-2. Steps to take in an emergency
Remove any dirt or foreign mat- ter from the wheel contact sur- face.
If foreign matter is on the wheel contact surface, the wheel nuts may loosen while the vehicle is in motion, and the tire may come off the vehicle.
STEP 2
Install the tire and loosely tighten each wheel nut by hand by approximately the same amount.
Replacing an aluminum wheel with a compact spare tire
Disc wheel seat
Tighten the nuts until the tapered portion comes into loose contact with the disc wheel seat.
Tapered portion
Replacing an aluminum wheel with an aluminum
Disc wheel
Turn the nut washers until they come into contact with the disc wheel.
Washer
423
5-2. Steps to take in an emergency
STEP 3
Lower the vehicle.
STEP 4
Firmly tighten each nut two or three times in the order shown in the illustration.
Tightening torque: 76 ft•lbf (103 N•m, 10.5 kgf•m)
STEP 5
Stow the flat tire, tire jack and all tools.
n The compact spare tire
l The compact spare tire is identified by the label “TEMPORARY USE
ONLY” on the tire sidewall. Use the compact spare tire temporarily only in an emergency.
l Make sure to check the tire pressure of the compact spare tire.
(→P. 457)
n When using the compact spare tire
As the compact spare tire is not equipped with the tire pressure warning valve and transmitter, low inflation pressure of the spare tire will not be warned. Also, if you replace the compact spare tire after the tire pressure warning light comes on, the light remains on.
424
5-2. Steps to take in an emergency
n If you have a flat front tire on a road covered with snow or ice
Install the compact spare tire on the rear of the vehicle. Perform the fol-
lowing steps and fit tire chains to the front tires.
STEP 1
Replace a rear tire with the compact spare tire. Replace the flat front tire with the tire removed from the rear of the vehicle. Fit tire chains to the front tires.
STEP 2
STEP 3
n After completing the tire change (U.S.A. only)
The tire pressure warning system must be reset. (→P. 355)
n Jack point guide
The jack point guides are located under the rocker panel. They indicate the jack point positions.
CAUTION
n Using the tire jack
Improper use of the tire jack may lead to death or serious injuries due to the vehicle suddenly falling off the jack. l Do not use the tire jack for any purpose other than replacing tires or
installing and removing tire chains.
l Only use the tire jack that comes with this vehicle for replacing a flat
tire. Do not use it on other vehicles, and do not use other tire jacks for replacing tires on this vehicle.
l Always check that the tire jack is securely set to the jack point. l Do not put any part of your body under the vehicle while it is supported
by a jack.
l Do not start or run the hybrid system while your vehicle is supported by
the jack.
425
5-2. Steps to take in an emergency
CAUTION
l Do not raise the vehicle while someone is in it. l When raising the vehicle, do not put an object on or under the jack. l Do not raise the vehicle to a height greater than that required to
replace the tire.
l Use a jack stand if it is necessary to get under the vehicle. Take particular care when lowering the vehicle to ensure that no one working on or near the vehicle will be injured.
n Replacing a flat tire
Observe the following precautions to reduce the risk of death or serious injury. l Never use oil or grease on the wheel bolts or wheel nuts.
Oil and grease may cause the wheel nuts to be excessively tightened, leading to bolt or disc wheel damage. In addition, the oil or grease can cause the wheel nuts to loosen and the wheel may fall off, causing a serious accident. Remove any oil or grease from the wheel bolts or wheel nuts.
l Have the wheel nuts tightened with a torque wrench to 76 ft•lbf (103
N•m, 10.5 kgf•m) as soon as possible after changing wheels. Failure to follow these precautions could cause the nuts to loosen and the wheel may fall off, which could lead to an accident causing death or serious injury.
n When using the compact spare tire
l Remember that your compact spare tire is specifically designed for use with your vehicle. Do not use your compact spare tire on another vehicle.
l Do not use two compact spare tires simultaneously. l Replace the compact spare tire with a standard tire as soon as possi-
ble.
l Avoid sudden acceleration, deceleration and braking, as well as sharp
cornering.
426
5-2. Steps to take in an emergency
CAUTION
n Speed limit when using the compact spare tire
Do not drive at speeds in excess of 50 mph (80 km/h) when a compact spare tire is installed on the vehicle. The compact spare tire is not designed for driving at high speeds. Failing to observe this precaution may lead to an accident causing death or seri- ous injury.
n When the compact spare tire is attached
The vehicle speed may not be correctly detected, and the following sys- tems may not operate correctly: l ABS l Brake assist l VSC l TRAC l VDIM l Navigation system (if equipped)
427
5-2. Steps to take in an emergency
NOTICE
n Do not drive the vehicle with a flat tire.
Do not continue driving with a flat tire. Driving even a short distance with a flat tire can damage the tire and the wheel beyond repair.
n When replacing the tires
When removing or fitting the wheels, tires or the tire pressure warning valve and transmitter, contact your Toyota dealer as the tire pressure warning valve and transmitter may be damaged if not handled correctly. n To avoid damage to the tire pressure warning valves and transmit-
ters When a tire is repaired with liquid sealants, the tire pressure warning valve and transmitter may not operate properly. If a liquid sealant is used, contact your Toyota dealer or other qualified service shop as soon as possible. Make sure to replace the tire pressure warning valve and transmitter when replacing the tire. (→P. 355)
n Be careful when driving over bumps with the compact spare tire
installed on the vehicle. The vehicle becomes lower when driving with the compact spare tire compared to when driving with standard tires. Be careful when driving over uneven road surfaces.
n Driving with tire chains and the compact spare tire
Do not fit tire chains to the compact spare tire. Tire chains may damage the vehicle body and adversely affect driving performance.
428
5-2. Steps to take in an emergency If the hybrid system will not start
Reasons for the hybrid system not starting vary depending on the situation. Check the following and perform the appropriate proce- dure: n The hybrid system will not start, even though the correct
starting procedure is being followed. (→P. 135) One of the following may be the cause of the problem. l The electronic key may not be functioning properly. (→P. 433) l There may be a malfunction in the immobilizer system.
(→P. 88)
l There may be a malfunction in the steering lock system. l The hybrid system may be malfunctioning due to an electrical problem such as an open circuit or a blown fuse. However, depending on the type of malfunction, an interim measure is available to start the hybrid system. (→P. 430)
n The interior lights and headlights are dim, or the horn does
not sound or sounds at a low volume. One of the following may be the cause of the problem. l The 12-volt battery may be discharged. (→P. 436) l The 12-volt battery terminal connections may be loose or cor-
roded.
429
5-2. Steps to take in an emergency
n The interior lights and headlights do not turn on, or the horn
does not sound. One of the following may be the cause of the problem. l One or both of the 12-volt battery terminals may be discon-
nected.
l The 12-volt battery may be discharged. (→P. 436) l There may be a malfunction in the steering lock system.
Contact your Toyota dealer if the problem cannot be repaired, or if repair procedures are unknown.
Emergency start function
When the hybrid system does not start, the following steps can be
used as an interim measure to start the hybrid system if the
“POWER” switch is functioning normally.
STEP 1
Set the parking brake. Shift the shift lever to P. Turn the “POWER” switch to ACCESSORY mode. Press and hold the “POWER” switch for about 15 seconds while depressing the brake pedal firmly.
STEP 2
STEP 3
STEP 4
Even if the hybrid system can be started using the above steps, the system may be malfunctioning. Have the vehicle checked by your Toyota dealer.
430
5-2. Steps to take in an emergency If the shift lever cannot be shifted from P
If the shift lever cannot be shifted with your foot on the brake, there
may be a problem with the shift lock system (a system to prevent
accidental operation of the shift lever). Have the vehicle inspected by
your Toyota dealer.
The following steps may be used as an emergency measure to
ensure that the shift lever can be shifted.
STEP 1
Set the parking brake. Turn the “POWER” switch to ACCESSORY mode. Depress the brake pedal.
STEP 2
STEP 3
STEP 4
Pry the cover up with a flat- head screwdriver or equiva- lent.
STEP 5
Press the “POWER” switch and start the hybrid system. For your safety, keep the brake pedal depressed.
STEP 6