2011 Toyota Camry HV Owners Manual

Select “Delete Phone” by using a voice command or

STEP 2

Select the cellular phone to be deleted by either of the follow- ing methods and select “Confirm” by using a voice command

or

a. Press the talk switch and say the name of the desired cellu-

lar phone.

b. Press the talk switch and say “List phones”. While the name of the desired cellular phone is being read aloud, press the talk switch.

Changing the passkey

STEP 1

Select “Set Passkey” by using a voice command or

STEP 2

Press the talk switch, say a 4 to 8-digit number, and select

“Confirm” by using a voice command or

The number should be input 1 digit at a time. When the entire number to be registered as a passkey has

STEP 3

been input, press

again.

277

3-4. Using the hands-free phone system (for cellular phone)

Turning the hands-free phone automatic connection on/off

n Turning off the automatic connection STEP 1

Select “Handsfree Power” by using a voice command or

STEP 2

Select “Turn off” by using a voice command or

n Turning on the automatic connection STEP 1

Select “Handsfree Power” by using a voice command or

STEP 2

Select “Turn on” by using a voice command or

n The number of cellular phones that can be registered Up to 6 cellular phones can be registered in the system.

278

3-4. Using the hands-free phone system (for cellular phone) Security and system setup

To enter the menu of each setting, follow the steps below: n Security setting items and operation procedure

l Setting or changing the PIN (Personal Identification Number)

1. “Setup” → 2. “Security” → 3. “Set PIN”

l Locking the phone book

1. “Setup” → 2. “Security” → 3. “Phonebook Lock”

l Unlocking the phone book

1. “Setup” → 2. “Security” → 3. “Phonebook Unlock”

n System setup items and operation procedure

l Setting voice guidance volume

1. “Setup” → 2. “System Setup” → 3. “Guidance Volume” Initialization 1. “Setup” → 2. “System Setup” → 3. “Initialize”

can only be used for system setup operation.

Setting or changing the PIN

n Setting a PIN

STEP 1

Select “Set PIN” by using a voice command or

STEP 2

Enter a PIN by using a voice command or

When using

, input the code 1 digit at a time.

279

3-4. Using the hands-free phone system (for cellular phone)

n Changing the PIN

STEP 1

Select “Set PIN” by using a voice command or

STEP 2

Enter the registered PIN by using a voice command or

STEP 3

Enter a new PIN by using a voice command or

When using

, input the code 1 digit at a time.

Locking or unlocking the phone book

STEP 1

Select “Phonebook lock” or “Phonebook unlock” by using a

voice command or

STEP 2

Input the PIN by either of the following methods and select

“Confirm” by using a voice command or

a. Press the talk switch and say the registered PIN.

b. Input a new PIN by using

280

3-4. Using the hands-free phone system (for cellular phone)

Setting voice guidance volume

STEP 1

Select “Guidance Volume” by using

STEP 2

Change the voice guidance volume.

To decrease the volume: Turn

counterclockwise.

To increase the volume: Turn

clockwise.

Initialization

STEP 1

Select “Initialize” and then “Confirm” by using

STEP 2

Select “Confirm” by using

281

3-4. Using the hands-free phone system (for cellular phone)

n Initialization

l The following data in the system can be initialized:

• Phone book • Outgoing and incoming call history • Speed dials • Registered cellular phone data • Security code

l Once the initialization has been completed, the data cannot be restored

to its original state.

n When the phone book is locked

The following functions cannot be used: l Dialing by inputting a name l Speed dialing l Dialing a number stored in the call history memory l Using the phone book

282

3-4. Using the hands-free phone system (for cellular phone) Using the phone book

To enter the menu of each setting, follow the steps below:

l Adding a new phone number

1. “Phonebook” → 2. “Add Entry”

l Setting speed dial

1. “Phonebook” → 2. “Set Speed Dial (Speed Dial)”

l Changing a registered name

1. “Phonebook” → 2. “Change Name”

l Deleting registered data

1. “Phonebook” → 2. “Delete Entry”

l Deleting speed dial

1. “Phonebook” → 2. “Delete Speed Dial”

l Listing the registered data

1. “Phonebook” → 2. “List Names”

Adding a new phone number

The following methods can be used to add a new phone number: l Transferring data from the cellular phone

Inputting a phone number by using a voice command

Inputting a phone number by using

l Selecting a phone number from outgoing or incoming call history

283

3-4. Using the hands-free phone system (for cellular phone)

n Adding procedure

STEP 1

Select “Add Entry” by using a voice command or

STEP 2

Use one of the following methods to input a telephone num- ber:

Inputting a telephone number by using a voice command

STEP2-1 Select “By Voice” by using a voice command or

STEP2-2 Press the talk switch, say the desired number, and

select “Confirm” by using a voice command.

Transferring data from the cellular phone

STEP2-1 Select “By Phone” and then “Confirm” by using a

voice command or

STEP2-2 Transfer the data from the cellular phone.

Refer to the manual that comes with the cellular phone for the details of transferring data.

STEP2-3 Select the data to be registered by either of the fol-

lowing methods: a. Say “Previous” or “Next” until the desired data is displayed, and select “Confirm” by using a voice command.

b. Select the desired data by using

284

3-4. Using the hands-free phone system (for cellular phone)

Inputting a phone number by using

STEP2-1 Select “Manual Input” by using

STEP2-2 Input a phone number by using

, and press

once again.

Input the phone number 1 digit at a time.

Selecting a phone number from outgoing or incoming call history

STEP2-1 Select “Call History” by using a voice command or

STEP2-2 Select “Outgoing” or “Incoming” by using a voice

command or

STEP2-3 Select the data to be registered by either of the fol-

lowing methods: a. Say “Previous” or “Go back” until the desired data is displayed, and select “Confirm” by using a voice command.

b. Select the desired data by using

285

3-4. Using the hands-free phone system (for cellular phone)

STEP 3

Select the name to be registered by either of the following methods, and select “Confirm” by using a voice command or

a. Press the talk switch and say the desired name.

b. Select “Record Name” by using

, and say the desired

name.

STEP 4

Select “Confirm” by using a voice command or

STEP 3

In firm” registers the newly added phone number as a speed dial.

, selecting “Set Speed Dial (Speed Dial)” instead of “Con-

286

3-4. Using the hands-free phone system (for cellular phone)

Setting speed dials

STEP 1

Select “Set Speed Dial (Speed Dial)” by using a voice com-

mand or

STEP 2

Select the data to be registered as a speed dial by either of the following methods: a. Press the talk switch, say desired number, and select “Con-

firm” by using a voice command or

b. Press the talk switch, and say “List names”. While the desired name is being read aloud, press the talk switch,

and select “Confirm” by using a voice command or

c. Select the desired data by using

STEP 3

Select the desired preset button, and register the data into speed dial by either of the following methods: a. Press the desired preset button, and select “Confirm” by

using a voice command or

b. Press and hold the desired preset button.

287

3-4. Using the hands-free phone system (for cellular phone)

Changing a registered name

STEP 1

Select “Change Name” by using a voice command or

STEP 2

Select the name to be changed by either of the following methods. a. Press the talk switch, say desired name, and select “Con-

firm” by using a voice command or

b. Press the talk switch, and say “List names”. While the desired name is being read aloud, press the talk switch,

and select “Confirm” by using a voice command or

c. Select the desired name by using

STEP 3

Select “Record Name” with

or the talk switch.

STEP 4

Say a new name, and select “Confirm” by using a voice com-

mand or

288

3-4. Using the hands-free phone system (for cellular phone)

Deleting registered data

STEP 1

Select “Delete Entry” by using a voice command or

STEP 2

Select the data to be deleted by either of the following meth- ods, and select “Confirm” by using a voice command or

a. Press the talk switch, and say the name of the desired

phone number to be deleted.

b. Press the talk switch, say “List phones”. While the name of the desired phone number is being read aloud, press the talk switch.

Deleting speed dials

STEP 1

Select “Delete Speed Dial” by using a voice command or

STEP 2

Press the preset button in which the desired speed dial is reg- istered, and select “Confirm” by using a voice command or

289

3-4. Using the hands-free phone system (for cellular phone)

Listing the registered data

Selecting “List names” by using a voice command causes a list of the registered data to be read aloud. When listing is complete, the system returns to “Phonebook”. Pressing the talk switch while the desired data is being read aloud selects the data, and the following function will be available. • Dialing: “Dial” • Changing a registered name: “Change Name” • Deleting an entry: “Delete Entry” • Setting a speed dial: “Set Speed Dial (Speed Dial)”

n Limitation of number of digits

A phone number that exceeds 24 digits cannot be registered.

290

3-5. Using the interior lights Interior lights list

Personal lights (→P. 293) Interior light (→P. 292) Front door courtesy light

n Illuminated entry system

The interior light (with the switch in the “DOOR” position) automatically turns on/off according to “POWER” switch mode, the presence of the electronic key, whether the doors are locked/unlocked and whether the doors are open/closed.

n To prevent the 12-volt battery from being discharged

If the interior light remains on when the door is not fully closed and the inte- rior light switch is in the “DOOR” position, the light will go off automatically after 20 minutes.

n Customization that can be configured at Toyota dealer

Settings (e.g. the time elapsed before lights turn off) can be changed. (Customizable features →P. 474)

291

3-5. Using the interior lights

Interior light

Vehicles without moon roof

Interior light

Door position Off On

Door position Off On

Vehicles with moon roof

292

3-5. Using the interior lights

Personal lights

Personal lights

Front

On/off

Rear (vehicles with moon roof)

On/off

When either of the rear side doors is opened, the light on that side turns on automatically. Clos- ing the rear side doors will turn the lights off.

293

3-6. Using the storage features List of storage features

Auxiliary boxes Glove box Cup holders Console box

CAUTION

n Items that should not be left in the storage spaces

Do not leave glasses, lighters or spray cans in the storage spaces, as this may cause the following when cabin temperature becomes high: l Glasses may be deformed by heat or cracked if they come into contact

with other stored items.

l Lighters or spray cans may explode. If they come into contact with other stored items, the lighter may catch fire or the spray can may release gas, causing a fire hazard.

294

Glove box

3-6. Using the storage features

Glove box and console box

Open (pull the lever) Lock with the mechanical key Unlock with the mechanical key

n Glove box light

The glove box light turns on when the tail lights are turned on.

CAUTION

n Caution while driving

Keep the glove box closed. Injuries may result in the event of an accident or sudden braking.

Console box

Lift the lid while pulling the lever.

295

3-6. Using the storage features

Console box

n When using the console box lid as an armrest (if equipped)

If necessary, the console box lid can slide forward. Pull the lid forward by grasping the front of the lid.

n Tray in the console box

The tray slides forward/backward and can be removed.

CAUTION

n Caution while driving

Keep the console box closed. Injuries may result in the event of an accident or sudden braking.

296

3-6. Using the storage features

Cup holders

Cup holders

Front

Push the lid.

Rear

Pull the armrest down.

n Using the cup holder (front) to store small items

Remove the holder.

297

3-6. Using the storage features

Cup holders and auxiliary boxes

CAUTION

n Items unsuitable for the cup holder

Do not place anything other than cups or aluminum cans in the cup holders. Other items may be thrown out of the holders in the event of an accident or sudden braking and cause injury. If possible, cover hot drinks to prevent burns.

n When not in use

Keep the cup holders closed. Injuries may result in the event of an accident or sudden braking.

Auxiliary boxes

Driver's side instrument panel

Pull the handle.

Overhead console

Push the lid.

298

3-6. Using the storage features

Auxiliary boxes

Front console

Push the lid.

Center console (type A)

Push the lid.

Center console (type B)

Lift the lid.

299

3-6. Using the storage features

n Cable pass-through

Auxiliary boxes

The auxiliary box of the front console is provided with a hole that allows cables to be passed into the cabin from the inside power outlet and AUX port or AUX port/ USB port.

Remove the lid. Push out and remove the outer lid.

CAUTION

n Caution while driving

Keep the auxiliary boxes closed. Injuries may result in the event of an accident or sudden braking.

300

3-7. Other interior features Sun visors

Forward position: Flip down. Side position: Flip down, unhook, and swing to the side.

301

3-7. Other interior features Vanity mirrors

Slide the cover.

The light turns on when the cover is opened. (if equipped)

302

3-7. Other interior features Clock

Adjusts the hour. Adjusts the minutes.

n The clock is displayed when

The “POWER” switch is in ACCESSORY or ON mode.

303

3-7. Other interior features Ashtray∗

An ashtray can be installed in a cup holder. (→P. 297)

CAUTION

n When not in use

Keep the ashtray closed. Injuries may result in the event of sudden braking, sudden swerving or an accident.

n To prevent fire

l Fully extinguish matches and cigarettes before putting them in the ashtray,

then make sure the ashtray is fully closed.

l Do not place paper or any other type of flammable object in the ashtray.

304

∗: If equipped

3-7. Other interior features Power outlet

The power outlet can be used for 12 V accessories that run on less than 10 A.

Front console

Center console

n The power outlet can be used when

The “POWER” switch is in ACCESSORY or ON mode.

n Cable pass-through

Connected cables can be passed through the hole in the auxiliary box to the front passenger’s side of the auxiliary box. (→P. 300)

305

3-7. Other interior features

NOTICE

n To avoid damaging the power outlet

Close the power outlet lid when the power outlet is not in use. Foreign objects or liquids that enter the power outlet may cause a short cir- cuit.

n To prevent the fuse from being blown

Do not use an accessory that uses more than 12 V 10 A. n To prevent the 12-volt battery from being discharged

Do not use the power outlet longer than necessary when the hybrid system is off.

306

3-7. Other interior features Seat heaters∗

Heats the left front seat Heats the right front seat The indicator light comes on.

n The seat heaters can be used when The “POWER” switch is in ON mode.

n When not in use

Turn the seat heater off. The indicator light turns off.

CAUTION

n Burns

l Use caution when seating the following persons in a seat with the seat

heater on to avoid the possibility of burns: • Babies, small children, the elderly, the sick and the disabled • Persons with sensitive skin • Persons who are fatigued • Persons who have taken alcohol or drugs that induce sleep (sleeping

drugs, cold remedies, etc.)

l Do not cover the seat with anything when using the seat heater.

Using the seat heater with a blanket or cushion increases the temperature of the seat and may lead to overheating.

∗: If equipped 307

3-7. Other interior features

NOTICE

n To prevent seat heater damage

Do not put unevenly weighted objects on the seat and do not stick sharp objects (needles, nails, etc.) into the seat.

n To prevent the 12-volt battery from being discharged

Turn the switches off when the hybrid system is off.

308

3-7. Other interior features Armrest

Pull the armrest down for use.

NOTICE

n To prevent damage to the armrest

Do not place too much strain on the armrest.

309

3-7. Other interior features Floor mat

Use only floor mats designed specifically for vehicles of the same model and model year as your vehicle. Fix them securely in place onto the carpet.

Fix the floor mat in place using the retaining hooks (clips) pro- vided.

The shape of the retaining hooks (clips) and the fixing procedure of the floor mat for your vehicle may differ from those shown in the illustration. For details, refer to the floor mat retention clip installation instructions supplied with the clips.

CAUTION

Observe the following precautions. Failure to do so may cause the driver's floor mat to slip, possibly interfering with the pedals while driving. An unexpectedly high speed may result or it may become difficult to stop the vehicle, leading to a serious accident. n When installing the driver's floor mat

l Do not use floor mats designed for other models or different model year

vehicles, even if they are Toyota Genuine floor mats.

l Only use floor mats designed for the driver's seat. l Always install the floor mat securely using the retaining hooks (clips) pro-

vided.

l Do not use two or more floor mats on top of each other. l Do not place the floor mat bottom-side up or upside-down.

n Before driving

310

l Check that the floor mat is securely fixed in the right place with all the pro- vided retaining hooks (clips). Be espe- cially careful to perform this check after cleaning the floor.

l With the hybrid system stopped and the shift lever in P, fully depress each pedal to the floor to make sure it does not interfere with the floor mat.

3-7. Other interior features Trunk features

n Grocery bag hooks

Type A

Type B

311

3-7. Other interior features

n Cargo net

Type A

Type B

NOTICE

n To prevent damage to the cargo net hooks

Avoid hanging things other than a cargo net on them.

312

3-7. Other interior features Garage door opener∗

The garage door opener can be programmed to operate garage doors, gates, entry doors, door locks, home lighting systems, secu- rity systems, and other devices.

The garage door opener (HomeLink Universal Transceiver) is manufac- tured under license from HomeLink.

Programming HomeLink (for U.S. owners)

To ensure correct programming into the HomeLink, install a new battery in the hand-held transmitter prior to programming. Failure to install a new battery into the hand-held transmitter will affect both the range and accuracy of the HomeLink in your vehicle. The battery side of the hand-held transmitter must be pointed away from the HomeLink during the programming process. The HomeLink compatible transceiver in your vehicle has 3 buttons which can be programmed to operate 3 different devices. Refer to the programming method below appropriate for the device.

Buttons Indicator

∗: If equipped 313

3-7. Other interior features

n Programming HomeLink STEP 1

Point the remote control for the device 1 to 3 in. (25 to 75 mm) from the HomeLink control but- tons.

the

indicator

Keep light on HomeLink in view while pro- gramming.

Press and hold down one of the buttons on HomeLink and the button on the transmitter. When the indicator light on HomeLink changes from a slow to a rapid flash after 20 seconds, you can release both buttons.

Test the operation of HomeLink by pressing the newly pro- grammed button.

the

hold

If programming a garage door opener, check to see if the garage door opens and closes. If the garage door does not operate, see if your garage transmitter is of the Rolling Code type. Press and programmed HomeLink button. The garage door has the rolling code feature if (on HomeLink) flashes rapidly for 2
seconds and then remains lit. If your transmitter is of the Rolling Code type, proceed to the head- ing “Programming a rolling code system”.

indicator

light

the

STEP 2

STEP 3

314

3-7. Other interior features

STEP 4

Repeat the steps above to program another device for each of the remaining HomeLink buttons.

n Programming a Rolling Code system (for U.S. owners)

If your device is Rolling Code equipped, follow the steps under the heading “Programming HomeLink” before proceeding with the steps listed below.

STEP 1

STEP 2

STEP 3

STEP 4

Locate the training button on the ceiling-mounted garage door opener motor. The exact location and color of the button may vary by brand of garage door opener. Refer to the operation manual supplied with the garage door opener for the location of the training button. Press the training button. Following this step, you have 30 seconds in which to initiate step 3
below. Press and release the vehicle’s programmed HomeLink but- ton twice. The garage door may open. If the garage door opens, the programming process is complete. If the door does not open, press and release the button a third time. This third press and release will complete the programming process by opening the garage door. The ceiling-mounted garage door opener motor should now recog- nize the HomeLink transceiver and operate the garage door. Repeat the steps above to program another rolling code sys- tem for any of the remaining HomeLink buttons.

n Programming an entry gate (for U.S. owners)/Programming all

devices in the Canadian market

STEP 1

STEP 2

STEP 3

Place your transmitter 1 to 3 in. (25 to 75 mm) away from the surface of HomeLink. Keep the indicator light on HomeLink in view while programming. Press and hold the selected HomeLink button. Repeatedly press and release (cycle) the device’s remote control button for two seconds each until step 4 is complete.

315

3-7. Other interior features

STEP 4

STEP 5

STEP 6

When the indicator light on the HomeLink compatible trans- ceiver starts to flash rapidly, release the buttons. Test the operation of HomeLink by pressing the newly pro- grammed button. Check to see if the gate/device operates correctly. Repeat the steps above to program another device for each of the remaining HomeLink buttons.

n Programming other devices

To program other devices such as home security systems, home door locks or lighting, contact your authorized Toyota dealer for assistance.

n Reprogramming a button

The individual HomeLink buttons cannot be erased but can be reprogrammed. To reprogram a button, follow the “Programming” instructions.

Operating HomeLink

Press the appropriate HomeLink button. The HomeLink indicator light on the HomeLink transceiver should turn on.

HomeLink continues to send a signal for up to 20 seconds as long as the button is pressed.

Erasing the entire HomeLink memory (all three programs)

Press and hold down the 2 out- side buttons for 20 seconds until the indicator light flashes.

If you sell your vehicle, be sure to erase the programs stored in the HomeLink memory.

316

3-7. Other interior features

n Before programming

Install a new battery in the transmitter.

l The battery side of the transmitter must be pointed away from

HomeLink.

n Certification for the garage door opener

For vehicles sold in the U.S.A.

FCC ID: CB2300NHL3
NOTE: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interfer- ence, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

For vehicles sold in Canada

NOTE: Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, includ- ing interference that may cause undesired operation of the device.

n When support is necessary

Visit on the web at www.homelink.com or call 1-800-355-3515.

317

3-7. Other interior features

CAUTION

n When programming a garage door or other remote control device

The garage door may operate, so ensure people and objects are out of dan- ger to prevent potential harm.

n Conforming to federal safety standards

Do not use the HomeLink compatible transceiver with any garage door opener or device that lacks safety stop and reverse features as required by federal safety standards. This includes any garage door that cannot detect an obstruction object. A door or device without these features increases the risk of death or serious injury.

318

3-7. Other interior features Compass∗

The compass on the anti-glare inside rear view mirror indicates the direction in which the vehicle is heading. n Operation

To turn the compass on or off, press and hold “AUTO” for 3
seconds.

n Displays and directions

Display

NE SE SW NW

Direction

North

Northeast

East

Southeast

South

Southwest

West

Northwest

∗: If equipped 319

3-7. Other interior features

Calibrating the compass

The direction display deviates from the true direction determined by the earth’s magnetic field. The amount of deviation varies according to the geographic position of the vehicle.

If you cross over a map boundary shown in the illustration, the compass will deviate. To obtain higher precision or perfect calibration, refer to the following.

n Deviation calibration STEP 1

STEP 2

Stop the vehicle in a place where it is safe to drive in a circle. Press and hold “AUTO” for 6
seconds.

A number (1 to 15) appears on the compass display.

STEP 3

Press “AUTO” and, referring to the map above, select the number of the zone where you are. If the direction is displayed several seconds after adjustment, the calibration is complete.

320

3-7. Other interior features

n Circling calibration STEP 1

Stop the vehicle in a place where it is safe to drive in a circle. Press and hold “AUTO” for 9
seconds.

C appears on the compass dis- play.

Drive the vehicle at 5 mph (8 km/ h) or less in a circle until a direc- tion is displayed.

STEP 2

STEP 3

If there is not enough space to drive in a circle, drive around the block until the direction is dis- played.

n Conditions unfavorable for correct operation

The compass may not show the correct direction in the following situations: l The vehicle is stopped immediately after turning. l The vehicle is on an inclined surface. l The vehicle is in a place where the earth's magnetic field is subject to interference by artificial magnetic fields (underground car park/parking lot, under a steel tower, between buildings, roof car park/parking lot, near an intersection, near a large vehicle, etc.).

l The vehicle has become magnetized.

(There is a magnet or metal object near the anti-glare inside rear view mirror.)

l The 12-volt battery has been disconnected. l A door is open.

321

3-7. Other interior features

CAUTION

n While driving the vehicle

Do not adjust the display. Be sure to adjust the display only when the vehicle is stopped.

n When doing the circling calibration

Be sure to secure a wide space, and watch out for people and vehicles in the neighborhood. Do not violate any local traffic rules while performing circling calibration.

NOTICE

n To avoid compass malfunctions

Do not place magnets or any metal objects near the anti-glare inside rear view mirror. Doing this may cause a malfunction of the compass sensor.

n To ensure normal operation of the compass

l Do not perform circling calibration of the compass in a place where the earth's magnetic field is subject to interference by artificial magnetic fields. l During calibration, do not operate electric systems (moon roof, power win-

dows, etc.) as they may interfere with the calibration.

322

4-1. Maintenance and care Cleaning and protecting the vehicle exterior

Perform the following to protect the vehicle and maintain it in prime condition:

l Working from top to bottom, liberally apply water to the vehicle body, wheel wells and underside of the vehicle to remove any dirt and dust.

l Wash the vehicle body using a sponge or soft cloth, such as a

chamois.

l For hard-to-remove marks, use car wash soap and rinse thor-

oughly with water.

l Wipe away any water. l Wax the vehicle when the waterproof coating deteriorates. If water does not bead on a clean surface, apply wax when the vehicle body is cool.

n Automatic car washes

l Fold the mirrors back before washing the vehicle. l Brushes used in automatic car washes may scratch the vehicle surface

and harm your vehicle’s paint.

n High pressure car washes

l Do not allow the nozzles of the car wash to come within close proximity

of the windows.

l Before car wash, check that the fuel filler door on your vehicle is closed

properly.

n Aluminum wheels

l Remove any dirt immediately by using a neutral detergent. Do not use hard brushes or abrasive cleaners. Do not use strong or harsh chemical cleaners. Use the same mild detergent and wax as used on the paint.

l Do not use detergent on the wheels when they are hot, for example after

driving for long distance in the hot weather.

l Wash detergent from the wheels immediately after use.

324

4-1. Maintenance and care

n Bumpers

Do not scrub with abrasive cleaners.

CAUTION

n Caution about the exhaust pipe

Exhaust gasses cause the exhaust pipe to become quite hot. When washing the vehicle, be careful not to touch the pipe until it has cooled sufficiently, as touching a hot exhaust pipe can cause burns.

NOTICE

n To prevent paint deterioration and corrosion on the body and compo-

nents (aluminum wheels etc.) l Wash the vehicle immediately in the following cases:

• After driving near the sea coast • After driving on salted roads • If you see coal tar or tree sap on the paint surface • If you see dead insects or insect droppings on the paint • After driving in an area contaminated with soot, oily smoke, mine dust,

iron powder or chemical substances

• If the vehicle becomes heavily soiled in dust or mud • If liquids such as benzene and gasoline are spilled on the paint surface If the paint is chipped or scratched, have it repaired immediately.

l To prevent the wheels from corroding, remove any dirt and store in a place

with low humidity when storing the wheels.

n Cleaning the exterior lights

l Wash carefully. Do not use organic substances or scrub with a hard brush.

This may damage the surfaces of the lights.

l Do not apply wax on the surfaces of the lights.

Wax may cause damage to the lenses.

325

4-1. Maintenance and care Cleaning and protecting the vehicle interior

The following procedures will help protect your vehicle's interior and keep it in top condition: n Protecting the vehicle interior

Remove dirt and dust using a vacuum cleaner. Wipe dirty sur- faces with a cloth dampened with lukewarm water.

n Cleaning the leather areas

l Remove dirt and dust using a vacuum cleaner. l Wipe any excess dirt and dust with a soft cloth dampened with

diluted detergent. Use a diluted water solution of approximately 5% neutral wool deter- gent.

l Wring out any excess water from the cloth and thoroughly

wipe off all remaining traces of detergent.

l Wipe the surface with a dry, soft cloth to remove any remain- ing moisture. Allow the leather to dry in a shaded ventilated area.

n Synthetic leather areas

l Remove loose dirt using a vacuum cleaner. l Apply a mild soap solution to the synthetic leather. l Allow the solution to soak in for a few minutes. Remove the

dirt and wipe off the solution with a clean, damp cloth.

326

4-1. Maintenance and care

n Caring for leather areas

Toyota recommends cleaning the interior of the vehicle at least twice a year to maintain the quality of the vehicle's interior.

n Shampooing the carpets

There are several commercial foaming-type cleaners available. Use a sponge or brush to apply the foam. Rub in overlapping circles. Do not apply water. Excellent results are obtained by keeping the carpet as dry as possi- ble.

n Seat belts

Clean with mild soap and lukewarm water using a cloth or sponge. Also check the belts periodically for excessive wear, fraying or cuts.

CAUTION

n Water in the vehicle

l Do not splash or spill liquid in the vehicle, such as on the floor, in the

hybrid battery (traction battery) air vents, or in the trunk. Doing so may cause the hybrid battery, electrical components etc. to mal- function or catch fire.

l Do not get any of the SRS components or wiring in the vehicle interior wet.

(→P. 93) Electrical malfunction may cause the airbags to deploy or not function properly, resulting in death or severe injury.

n Cleaning the interior (especially instrument panel)

Do not use polish wax or polish cleaner. The instrument panel may reflect off the windshield, obstructing the driver's view and leading to an accident, resulting in death or serious injury.

327

4-1. Maintenance and care

NOTICE

n Cleaning detergents

l Do not use organic substances such as benzene or gasoline, acidic or alkaline solutions, dye, bleach or other detergent. Doing so may discolor the vehicle interior or cause streaks or damage to painted surfaces.

l Do not use polish wax or polish cleaner. The instrument panel's or other

interior part’s painted surface may be damaged.

n Preventing damage to leather surfaces

Observe the following precautions to avoid damage to and deterioration of leather surfaces. l Remove any dust or dirt on leather surfaces immediately. l Do not expose the vehicle to direct sunlight for extended periods of time.

Park the vehicle in the shade, especially during summer.

l Do not place items made of vinyl, plastic, or that contain wax, on the upholstery, as they may stick to the leather surface if the vehicle interior heats up significantly.

n Water on the floor

Do not wash the vehicle floor with water. Vehicle systems such as the audio system may be damaged if water comes into contact with electrical components under the floor of the vehicle, and may also cause the body to rust.

n Cleaning the inside of the rear window

l Do not use glass cleaner to clean the rear window, as this may cause damage to the rear window defogger heater wires or antenna. Use a cloth dampened with lukewarm water to gently wipe the window clean. Wipe the window in strokes running parallel to the heater wires or antenna. l Be careful not to scratch or damage the heater wires or antenna.

328

4-2. Maintenance Maintenance requirements

To ensure safe and economical driving, day-to-day care and regular maintenance is essential. It is the owner’s responsibility to perform regular checks. Toyota recommends the following maintenance. n General maintenance

Should be performed on a daily basis. This can be done by your- self or by a Toyota dealer. n Scheduled maintenance

Should be performed at specified intervals according to the maintenance schedule. For details about maintenance items and schedules, refer to the “Scheduled Maintenance Guide” or “Owner’s Manual Supplement”.

n Do-it-yourself maintenance

You can perform some maintenance procedures yourself. Please be aware that do-it-yourself maintenance may affect war- ranty coverage. The use of Toyota Repair Manuals is recommended. For details about warranty coverage, see the separate “Owner’s Warranty Information Booklet”, “Owner’s Manual Supplement”.

n Repair and replacement

It is recommended that genuine Toyota parts be used for repair to ensure performance of each system. If non-Toyota parts are used in replacement or if a repair shop other than a Toyota dealer performs repairs, confirm the war- ranty coverage.

329

4-2. Maintenance

n Allow inspection and repairs to be performed by a Toyota dealer

l Toyota technicians are well-trained specialists and are kept up to date with the latest service information. They are well informed about the operations of all systems on your vehicle.

l Keep a copy of the repair order. It proves that the maintenance that has been performed is under warranty coverage. If any problem should arise while your vehicle is under warranty, your Toyota dealer will promptly take care of it.

CAUTION

n Warning in handling of 12-volt battery

l Engine exhaust, some of its constituents, and a wide variety of automobile components contain or emit chemicals known to the State of California to cause cancer and birth defects and other reproductive harm. Work in a well ventilated area.

l Oils, fuels and fluids contained in vehicles as well as waste produced by component wear contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Avoid exposure and wash any affected area immediately.

l 12-volt battery posts, terminals and related accessories contain lead and lead compounds which are known to cause brain damage. Wash your hands after handling. (→P. 352)

330

4-2. Maintenance General maintenance

Listed below are the general maintenance items that should be performed at the intervals specified in the “Owner’s Warranty Information Booklet” or “Owner’s Manual Supplement/Scheduled Maintenance Guide”. It is recommended that any problem you notice should be brought to the attention of your Toyota dealer or qualified service shop for advice.

Engine compartment

Items

Brake fluid Engine/power control unit coolant Engine oil Exhaust system

Radiator/condenser/hoses

Washer fluid

Trunk

Items

12-volt battery

Check points

(→P. 348) At the correct level? At the correct level? (→P. 346) At the correct level? (→P. 342) No fumes or strange sounds? Not blocked with foreign matter? (→P. 348)

At the correct level? (→P. 349)

Check points Check the connections.

(→P. 350)

331

4-2. Maintenance

Vehicle interior

Items

Check points

• Moves smoothly (without uneven pedal effort or catching)? • Can the vehicle be held securely on an incline with the shift lever in P? • Moves smoothly? • Does it have appropriate clear- ance and correct amount of free play? • Not pull to one side when applied? • Loss of brake effectiveness? • Spongy feeling brake pedal? • Pedal almost touches floor? • Move smoothly and lock securely? • Function properly? • Do all the lights come on? • Moves smoothly? • Can hold the vehicle securely on an incline? • Does the seat belt system oper- ate smoothly? • Are the belts undamaged?