2010 Toyota Camry HV Owners Manual

STEP 2

Press player mode. Press “∨” or “∧” on

to select the CD, iPod® player or USB memory

to select the desired track/file.

Selecting a folder

STEP 1

STEP 2

Press Press and hold “∨” or “∧” on

to select the MP3 and WMA mode.

until you hear a beep.

Selecting a disc in the CD player (CD player with changer only)

STEP 1

STEP 2

Press Press and hold “∨” or “∧” on

to select the CD mode.

until you hear a beep.

CAUTION

■To reduce the risk of an accident

Exercise care when operating the audio switches on the steering wheel.

240

3-3. Using the hands-free phone system (for cellular phone) Bluetooth® audio system∗

The Bluetooth® audio system enables you to enjoy music played on a portable digital audio player (portable player) from the vehicle speakers via wireless communication. This audio system supports Bluetooth®, a wireless data system capable of playing portable audio music without cables. If your por- table player does not support Bluetooth®, the Bluetooth® audio sys- tem will not function. Owners of models equipped with a navigation system should refer to the “Navigation System Owner's Manual”.

Title

Using the Bluetooth® audio system Operating a Bluetooth® enabled portable player Setting up a Bluetooth® enabled portable player Bluetooth® audio system setup

Page P. 244
P. 249
P. 251
P. 256

■Conditions under which the system will not operate

●If using a portable player that does not support Bluetooth® ●If the portable player is switched off ●If the portable player is not connected ●If the portable player’s battery is low ●If the portable player is behind the seat or in the glove box or console box ●If metal is covering or touching the portable player

∗: If equipped 241

3-3. Using the hands-free phone system (for cellular phone)

■When transferring ownership of the vehicle

Be sure to initialize the system to prevent personal data from being improp- erly accessed. (→P. 280)

■About Bluetooth®

Bluetooth is a registered trademark of Bluetooth SIG. Inc.

■Compatible models

●Bluetooth® specifications:

Ver. 1.2

●Following Profiles:

• A2DP (Advanced Audio Distribution Profile) Ver. 1.0
• AVRCP (Audio/Video Remote Control Profile) Ver. 1.0 or higher (Ver.

1.3 or higher recommended)

Portable players must correspond to the above specifications in order to be connected to the Bluetooth® audio system. However, please note that some functions may be limited depending on the type of portable player.

■Certification for the Bluetooth® audio system

2024B-FT0001A

FCC ID: BABFT0001A IC ID: MADE IN JAPAN This device complies with Part 15 of the FCC Rules and RSS-210 Rules. Operation is subject to the following two conditions; (1) This device may not cause harmful interference, and (2) This device must accept any interfer- ence received, including interference that may cause undesired operation.

242

3-3. Using the hands-free phone system (for cellular phone)

CAUTION

■FCC WARNING

Changes or modifications in construction not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Radio frequency exposure. This device is approved for Mobile Application only and, to comply with applicable FCC radio frequency exposure regula- tions, must be used with a distance of at least 7.9in. (20cm) between the antenna and the body of any person at all time during use.

■Caution while driving

Do not connect portable players or operate the controls.

NOTICE

■To prevent damage to portable players

Do not leave portable players in the vehicle. The temperature inside the vehicle may become high, resulting in damage to the player.

243

3-3. Using the hands-free phone system (for cellular phone) Using the Bluetooth® audio system

■ Audio unit

Display A message, name, number, etc. is displayed.

Lower-case characters and special characters cannot be displayed.

Displays information that is too long to be displayed at one time on the display (press and hold) Selects items such as menu and number Turn: Selects an item Press: Inputs the selected item Bluetooth® connection con- dition

If “BT” is not displayed, the Bluetooth® audio system cannot be used.

■ Microphone

244

3-3. Using the hands-free phone system (for cellular phone)

Operating the system using voice commands

By following voice guidance instructions output from the speaker, voice commands enable to the operation of the Bluetooth® audio sys-

tem without the need to check the display or operate

■ Operation procedure when using voice commands

Press the talk switch and follow voice guidance instructions.

■ Auxiliary commands when using voice commands

The following auxiliary commands can be used when operating the system using a voice command: “Cancel”: Exits the Bluetooth® audio system “Repeat”: Repeats the previous voice guidance instruction “Go back”: Returns to the previous procedure “Help”: Reads aloud the function summary if a help comment is registered for the selected function

245

3-3. Using the hands-free phone system (for cellular phone)

Using the Bluetooth® audio system for the first time

Before using the Bluetooth® audio system, it is necessary to register a Bluetooth® enabled portable player in the system. Follow the proce- dure below to register (pair) a portable player:

STEP 1

Press

until “BT AUDIO” is displayed.

Press

that corresponds to “SETUP”.

STEP 2
The introductory guidance and portable player name registration instructions are heard.

STEP 3

Select “Pair Audio Player” using a voice command or

STEP 4

Register a portable player name by either of the following methods:

a. Select “Record Name” using

, and say the name to

be registered.

b. Press the talk switch and say the name to be registered.

A voice guidance instruction to confirm the input is heard.

STEP 5

Select “Confirm” using a voice command or

A passkey is displayed and heard, and a voice guidance instruction for inputting the passkey into the portable player is heard. STEP 6

Input the passkey into the portable player. Refer to the manual that comes with the portable player for the oper- ation of the portable player.

Guidance for registration completion is heard.

246

3-3. Using the hands-free phone system (for cellular phone)

If the portable player has a Bluetooth® phone, the phone can be reg- istered at the same time. (→P. 263)

Menu list of the Bluetooth® audio system

■ Normal operation

First menu

Second menu

“BT•A Setup”

“Setup”

“System Setup”

Third menu

Operation detail

“Pair Audio Player” “Select Audio Player”

“Change Name”

“List Audio Play- ers” “Set Passkey”

“Delete Audio”

“Guidance Vol- ume”

“Device Name”

“Initialize”

Registering a portable player

Selecting a portable player to be used Changing the registered name of a portable player Listing the registered porta- ble players Changing the passkey Deleting a registered porta- ble player Setting voice guidance vol- ume Displaying the Bluetooth® device address and name Initializing the system

“BT•A Setup” can be canceled by pressing the on-hook switch or saying the voice command, “Cancel”.

247

3-3. Using the hands-free phone system (for cellular phone)

■When using a voice command

For numbers, say a combination of single digits from zero to nine. Say the command correctly and clearly.

■Situations that the system may not recognize your voice

●When driving on rough roads ●When driving at high speeds ●When air is blowing out of the vents onto the microphone ●When the air conditioning fan emits a loud noise

■Operations that cannot be performed while driving

●Operating the system with

●Registering a portable player to the system

■Changing the passkey

→P. 254

248

3-3. Using the hands-free phone system (for cellular phone) Operating a Bluetooth® enabled portable player

Power

Volume

Selector knob

Selecting an album

Playback

Fast-forwarding and reversing

Playback/pause

Displaying text messages

Selecting an album

Press “∨” or “∧” on

Selecting tracks

Press “∧” or “∨” on

Playing and pausing tracks

Press

249

3-3. Using the hands-free phone system (for cellular phone)

Fast-forwarding and reversing tracks

Press and hold “∧” or “∨” on

Switching the display

Press the

is pressed, the display changes in the following order:

Each time Track title → Track title/Artist name → Track title/Album name → Track title/Elapsed time

Using the steering wheel audio switches

→P. 238

■Bluetooth® audio system functions

Depending on the portable player that is connected to the system, certain functions may not be available.

■Error messages

“BT AUDIO ERROR”: This indicates a problem in the system.

250

3-3. Using the hands-free phone system (for cellular phone) Setting up a Bluetooth® enabled portable player

Registering a portable player in the Bluetooth® audio system allows the system to function. The following functions can be used for reg- istered portable players: ■ Functions and operation procedures

STEP 1

Press

until “BT AUDIO” is displayed.

STEP 2

STEP 3

Press Select one of the following functions using a voice com-

that corresponds to “SETUP”.

mand or

● Registering a portable player

“Pair Audio Player”

● Selecting a portable player to be used

“Select Audio Player”

● Changing the registered name

“Change Name”

● Listing the registered portable players

“List Audio Players”

● Changing the passkey

“Set Passkey”

● Deleting a registered portable player “Delete Audio Player (Delete Audio)”

251

3-3. Using the hands-free phone system (for cellular phone)

Registering a portable player

Select “Pair Audio Player” using a voice command or

, and

perform the procedure for registering a portable player. (→P. 246)

Selecting a portable player to be used

STEP 1

Select “Select Audio Player” using a voice command or

STEP 2

Select the portable player to be used by either of the following methods, and select “Confirm” by using a voice command or

a. Press the talk switch and say the name of the desired por-

table player.

b. Press the talk switch and say “List Audio Players”. When the name of the desired portable player is read aloud, press the talk switch.

STEP 3

Press the talk switch and say “From Car” or “From Audio”, and

select “Confirm” by using a voice command or

If “From Car” is selected, the portable player will be automatically connected whenever the “POWER” switch is in either ACCESSORY or IGNITION ON mode.

252

3-3. Using the hands-free phone system (for cellular phone)

Changing the registered name of a portable player

STEP 1

Select “Change Name” using a voice command or

STEP 2

Select the name of the portable player to be changed by either of the following methods, and select “Confirm” using a

voice command or

a. Press the talk switch and say the name of desired portable

player.

b. Press the talk switch and say “List Audio Players”. When the name of the desired portable player is read aloud, press the talk switch.

STEP 3

Press the talk switch or select “Record Name” using

and say the new name.

STEP 4

Select “Confirm” using a voice command or

253

3-3. Using the hands-free phone system (for cellular phone)

Listing the registered portable players

Select “List Audio Players” using a voice command or

. The list

of registered portable players will be read aloud. When listing is complete, the system returns to “BT•A Setup”. Pressing the talk switch while the name of a portable player is being read aloud selects the portable player, and the following functions will become available: ● Selecting a portable player: “Select Audio Player” ● Changing a registered name: “Change Name” ● Deleting a portable player: “Delete Audio Player (Delete Audio)”

Changing the passkey

STEP 1

Select “Set Passkey” using a voice command or

STEP 2

Press the talk switch, say a 4 to 8-digit number, and select

“Confirm” using a voice command or

STEP 3

When the entire number to be registered as a passkey has

been input, press

again.

If the number to be registered has 8 digits, pressing of the knob is not necessary.

254

3-3. Using the hands-free phone system (for cellular phone)

Deleting a registered portable player

STEP 1

Select “Delete Audio Player (Delete Audio)” using a voice

command or

STEP 2

Select the portable player to be deleted by either of the follow- ing methods and select “Confirm” using a voice command or

a. Press the talk switch and say the name of the desired por-

table player.

b. Press the talk switch and say “List Audio Players”. When the name of the desired portable player is read aloud, press the talk switch.

If the portable player to be deleted is paired as a Bluetooth® phone, the registration of the mobile phone can be deleted at the same time. A voice guidance instruction to delete a mobile phone is heard.

STEP 3

Select “Confirm” by using a voice command or

■The number of portable players that can be registered Up to 2 portable players can be registered in the system.

255

3-3. Using the hands-free phone system (for cellular phone) Bluetooth® audio system setup

■ System setup items and operation procedures →P. 278

256

3-4. Using the hands-free phone system (for cellular phone) Hands-free phone system (for cellular phone) features∗

This system supports Bluetooth®, which allows you to make or receive calls without using cables to connect a cellular phone and the system, and without operating the cellular phone. Owners of models equipped with a navigation system should refer to the “Navigation System Owner's Manual”. ■ Hands-free system quick guide STEP 1

Setting a cellular phone. (→P. 261) Adding an entry to the phonebook (Up to 20 names can be stored) (→P. 282) Dialing by inputting a name. (→P. 270)

STEP 2

STEP 3

∗: If equipped 257

3-4. Using the hands-free phone system (for cellular phone)

Title

Using the hands-free phone system ■ Operating the system by using a voice

■ Using the hands-free phone system for

■ Menu list of the hands-free phone sys-

command

the first time

tem

Making a phone call ■ Dialing by inputting a number ■ Dialing by inputting a name ■ Speed dialing ■ When receiving a phone call ■ Transferring a call ■ Using the call history memory Setting a cellular phone ■ Registering a cellular phone ■ Selecting the cellular phone to be used ■ Changing a registered name ■ Listing the registered cellular phones ■ Deleting a cellular phone ■ Changing the passkey ■ Turning the hands-free phone auto-

matic connection on/off Security and system setup ■ Setting or changing the PIN ■ Locking or unlocking the phone book ■ Setting voice guidance volume ■ Initialization Using the phone book ■ Adding a new phone number ■ Setting speed dials ■ Changing a registered name ■ Deleting registered data ■ Deleting speed dials ■ Listing the registered data

258

Page

P. 261

P. 269

P. 273

P. 278

P. 282

3-4. Using the hands-free phone system (for cellular phone)

■Conditions affecting operation

The hands-free phone system may not operate normally in the following situ- ations: ●The cellular phone is turned off, or located outside the service area. ●The cellular phone has a low battery. ●The cellular phone is not connected to the system. ●The cellular phone is behind the seat or in the glove box, or metal mate-

rial covers or touches the phone.

■When transferring ownership of the vehicle

Be sure to initialize the system to prevent personal data from being improp- erly accessed.

■Required profiles for the cellular phone

●HFP (Hands Free Profile) Ver. 1.0
●OPP (Object Push Profile) Ver. 1.1

■About Bluetooth®

Bluetooth is a registered trademark of Bluetooth SIG. Inc.

■Certification for the hands-free phone system

2024B-FT0001A

FCC ID: BABFT0001A IC ID: MADE IN JAPAN This device complies with Part 15 of the FCC Rules and RSS-210 Rules. Operation is subject to the following two conditions; (1) This device may not cause harmful interference, and (2) This device must accept any interfer- ence received, including interference that may cause undesired operation.

259

3-4. Using the hands-free phone system (for cellular phone)

CAUTION

■FCC WARNING

Changes or modifications in construction not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Radio frequency exposure. This device is approved for Mobile Application only and, to comply with applicable FCC radio frequency exposure regula- tions, must be used with a distance of at least 7.9in. (20cm) between the antenna and the body of any person at all time during use.

■Caution while driving

Do not use a cellular phone, or connect the Bluetooth® phone.

NOTICE

■To prevent damage to a cellular phone

Do not leave a cellular phone in the vehicle. The temperature inside may become high resulting in damage to the phone.

260

3-4. Using the hands-free phone system (for cellular phone) Using the hands-free phone system (for cellular phone)

■ Audio unit

Display A message, name, phone number, etc. is displayed.

Lower-case characters and special characters, such as an umlaut, cannot be dis- played.

Displays information that is too long to be displayed at one time on the display (press and hold) Selects speed dials Selects items such as menu or number Turn: Selects an item Press: Inputs the selected item Bluetooth® connection con- dition and reception level

If “BT” is not displayed, the hands-free phone system cannot be used.

261

3-4. Using the hands-free phone system (for cellular phone)

■ Steering wheel

Volume The voice guidance volume cannot be adjusted using this button. On-hook switch Turns the hands-free sys- tem off/ends a call/refuses a call Off-hook switch Turns the hands-free sys- tem on/starts a call Talk switch Turns the voice command system on (press)/turns the voice command system off (press and hold)

■ Microphone

262

3-4. Using the hands-free phone system (for cellular phone)

Operating the system by using a voice command

By following voice guidance instructions output from the speaker, voice commands enable to the operation of the hands-free phone

system without the need to check the display or operate

■ Operation procedure when using a voice command

Press the talk switch and follow voice guidance instructions.

■ Auxiliary commands when using a voice command

The following auxiliary commands can be used when operating the system using a voice command: Cancel: Exits the hands-free phone system Repeat: Repeats the previous voice guidance instruction Go back: Returns to the previous procedure Help: Reads aloud the function summary if a help comment is registered for the selected function

Using the hands-free phone system for the first time

Before using the hands-free phone system, it is necessary to register a cellular phone in the system. The phone registration mode will be entered automatically when starting the system with no cellular phone registered. Follow the procedure below to register a cellular phone: STEP 1
The introductory guidance and phone name registration instructions are heard.

Press the off-hook switch or the talk switch.

263

3-4. Using the hands-free phone system (for cellular phone)

STEP 2

Select “Pair Phone” using a voice command or

STEP 3

Register a phone name by either of the following methods.

a. Select “Record Name” by using

, and say a name to

be registered.

b. Press the talk switch and say a name to be registered.

A voice guidance instruction to confirm the input is heard.

STEP 4

Select “Confirm” by using a voice command or

Registration to the hans-free phone system only

STEP 5

Select “Phone Only” using a voice command or

Registration to the hans-free phone system and Bluetooth® audio system at a same time

STEP 5

Select “Internal Audio (Int. Audio)” using a voice command or

STEP 6

Select “Confirm” by using a voice command or

A passkey is displayed and heard, and a voice guidance instruction for inputting the passkey into the cellular phone is heard. STEP 7

Input the passkey into the cellular phone. Refer to the manual that comes with the cellular phone for the oper- ation of the phone.

Guidance for registration completion is heard.

264

3-4. Using the hands-free phone system (for cellular phone)

Menu list of the hands-free phone system

■ Normal operation

First menu

Second menu

Third menu

Operation detail

Callback

Redial

Dial by number Dial by name

Phonebook

Add Entry Change Name Delete Entry Delete Speed Dial List Names Set Speed Dial (Speed Dial)

Dialing a number stored in the incoming call history memory Dialing a number stored in the outgoing call history memory

Dialing by inputting a number

Dialing by inputting a name registered in the phone book Adding a new number Changing a name in the phone book Deleting the phone book data

Deleting a registered speed dial

Listing the phone book data

Registering a speed dial

265

3-4. Using the hands-free phone system (for cellular phone)

First menu

Second menu

Third menu

Operation detail

Security

Setup

Phone Setup

System Setup

Set PIN Phonebook Lock Phonebook Unlock

Pair Phone

Change Name

Delete Phone

List phones

Select phone

Set Passkey Hands-free power Guidance Vol- ume

Device Name

Initialize

Setting a PIN code Locking the phone book

Unlocking the phone book

Registering the cellular phone to be used Changing a registered name of a cellular phone Deleting a registered cellular phone Listing the registered cellular phones Selecting a cellular phone to be used Changing the passkey Setting a Hands-free power on/off Setting voice guidance vol- ume Displaying a device informa- tion Initialization

266

3-4. Using the hands-free phone system (for cellular phone)

■ Using a short cut key

First menu

Second menu

Operation detail

Dial “XXX (name)”

Dial “XXX (number)” Phone book add entry

Phone book change name

Phone book delete entry Phone book set speed dial Phone book delete speed dial

Phonebook

Dialing a number registered in the phone book Dialing the input numbers

Adding a new number

Changing the name of a phone number in the phone book

Deleting phone book data

Registering a speed dial

Deleting a speed dial

Phonebook Unlock Phonebook Lock

Unlocking the phone book Locking the phone book

267

3-4. Using the hands-free phone system (for cellular phone)

■Automatic volume adjustment

When vehicle speed is 50 mph (80 km/h) or more, the volume automatically increases. The volume returns to the previous volume setting when vehicle speed drops to 43 mph (70 km/h) or less.

■When using a voice command

For numbers, say a combination of single digits from zero to nine, # (pound), ∗ (star), and + (plus). Say a command correctly and clearly.

■Situations that the system may not recognize your voice

●When driving on a rough road ●When driving at high speeds ●When air is blowing out of the vents onto the microphone ●When the air conditioning fan emits a loud noise

■Operations that cannot be performed while driving

●Operating the system with

●Registering a cellular phone to the system

■Changing the passkey

→P. 276

268

3-4. Using the hands-free phone system (for cellular phone) Making a phone call

■ Making a phone call

● Dialing by inputting a number

“Dial by number”

● Dialing by inputting a name

“Dial by name” ● Speed dialing ● Dialing a number stored in the outgoing history memory

“Redial”

● Dialing a number stored in the incoming history memory

“Call back”

■ Receiving a phone call ● Answering the phone ● Refusing the call ■ Transferring a call ■ Using the call history memory

● Dialing ● Storing data in the phone book ● Deleting

Dialing by inputting a number

STEP 1

STEP 2

STEP 3

Press the talk switch and say “Dial by number”. Press the talk switch and say the phone number. Dial by one of the following methods: a. Press the off-hook switch. b. Press the talk switch and say “Dial”.

c. Select “Dial” by using

269

3-4. Using the hands-free phone system (for cellular phone)

Dialing by inputting a name

STEP 1

STEP 2

Press the talk switch and say “Dial by name”. Select a registered name to be input by either of the following methods: a. Press the talk switch and say a registered name. b. Press the talk switch and say “List names”. Press the talk

switch while the desired name is being read aloud.

STEP 3

Dial by one of the following methods: a. Press the off-hook switch. b. Press the talk switch and say “Dial”.

c. Select “Dial” by using

Speed dialing

STEP 1

STEP 2

STEP 3

Press the off-hook switch. Press the preset button in which the desired number is regis- tered. Press the off-hook switch.

When receiving a phone call

■ Answering the phone

Press the off-hook switch.

■ Refusing the call

Press the on-hook switch.

270

3-4. Using the hands-free phone system (for cellular phone)

Transferring a call

A call can be transferred between the cellular phone and system while dialing, receiving a call, or during a call. Use one of the follow- ing methods:

a. Operate the cellular phone.

Refer to the manual that comes with the cellular phone for the oper- ation of the phone.

b. Press the off-hook switch*1. c. Press the talk switch and say “Call Transfer”*2. *1: This operation can be performed only when transferring a call

from the cellular phone to the system during a call.

*2: While the vehicle is in motion, a call cannot be transferred from

the system to the cellular phone.

Using the call history memory

Follow the procedure below to use a number stored in the call history memory: STEP 1

Press the talk switch and say “Redial” (when using a number stored in the outgoing call history memory) or “Call back” (when using a number stored in the incoming call history memory). Select the number by either of the following methods: a. Say “Previous” or “Go back” until the desired number is dis-

STEP 2

played.

b. Select the desired number by using

271

3-4. Using the hands-free phone system (for cellular phone)

The following operations can be performed:

Dialing: Press the off-hook switch or select “Dial” by using a voice

command or

Storing the number in the phone book: Select “Store” by using a

voice command or

Deleting: Select “Delete” by using a voice command or

■Call history

Up to 5 numbers can be stored in each of the outgoing and incoming call his- tory memories.

■When talking on the phone

●Do not talk simultaneously with the other party. ●Keep the volume of the received voice down. Otherwise, voice echo will

increase.

272

3-4. Using the hands-free phone system (for cellular phone) Setting a cellular phone

Registering a cellular phone in the hands-free phone system allows the system to function. The following functions can be used for reg- istered cellular phones: ■ Functions and operation procedures To enter the menu for each function, follow the steps below by

using a voice command or

● Registering a cellular phone

1. “Setup” → 2. “Phone Setup” → 3. “Pair Phone”

● Selecting the cellular phone to be used

1. “Setup” → 2. “Phone Setup” → 3. “Select Phone”

● Changing a registered name

1. “Setup” → 2. “Phone Setup” → 3. “Change Name”

● Listing the registered cellular phones

1. “Setup” → 2. “Phone Setup” → 3. “List Phones”

● Deleting a cellular phone

1. “Setup” → 2. “Phone Setup” → 3. “Delete”

● Changing the passkey

1. “Setup” → 2. “Phone Setup” → 3. “Set Passkey”

Registering a cellular phone

Select “Pair Phone” by using a voice command or

, and do the

procedure for registering a cellular phone. (→P. 263)

273

3-4. Using the hands-free phone system (for cellular phone)

Selecting the cellular phone to be used

STEP 1

Select “Select Phone” by using a voice command or

Pattern A

STEP 2

Select the cellular phone to be used by either of the following methods, and select “Confirm” by using a voice command or

a. Press the talk switch and say the desired phone name. b. Press the talk switch and say “List phones”. While the name of the desired cellular phone is being read aloud, press the talk switch.

Pattern B

STEP 2

Select the cellular phone to be used by using

Changing a registered name

STEP 1

Select “Change Name” by using a voice command or

STEP 2

Select the name of the cellular phone to be changed by either of the following methods: a. Press the talk switch and say the desired phone name, and

select “Confirm” by using a voice command or

b. Press the talk switch and say “List phones”. While the desired phone name is being read aloud, press the talk switch.

274

3-4. Using the hands-free phone system (for cellular phone)

c. Select the desired phone name by using

STEP 3

Press the talk switch or select “Record Name” by using

and say a new name.

STEP 4

Select “Confirm” by using a voice command or

Listing the registered cellular phones

Selecting “List Phones” by using a voice command or

causes

the list of registered cellular phones to be read aloud. When listing is complete, the system returns to “Phone Setup”. Pressing the talk switch while the name of a cellular phone is being read selects the cellular phone, and the following functions will be available: • Selecting a cellular phone: “Select Phone” • Changing a registered name: “Change Name” • Deleting a cellular phone: “Delete Phone”

275

3-4. Using the hands-free phone system (for cellular phone)

Deleting a cellular phone

STEP 1

Select “Delete Phone” by using a voice command or

STEP 2

Select the cellular phone to be deleted by either of the follow- ing methods and select “Confirm” by using a voice command

or

a. Press the talk switch and say the name of the desired cellu-

lar phone.

b. Press the talk switch and say “List phones”. While the name of the desired cellular phone is being read aloud, press the talk switch.

Changing the passkey

STEP 1

Select “Set Passkey” by using a voice command or

STEP 2

Press the talk switch, say a 4 to 8-digit number, and select

“Confirm” by using a voice command or

The number should be input 1 digit at a time. When the entire number to be registered as a passkey has

STEP 3

been input, press

again.

276

3-4. Using the hands-free phone system (for cellular phone)

Turning the hands-free phone automatic connection on/off

■ Turning off the automatic connection STEP 1

Select “Handsfree Power” by using a voice command or

STEP 2

Select “Turn off” by using a voice command or

■ Turning on the automatic connection STEP 1

Select “Handsfree Power” by using a voice command or

STEP 2

Select “Turn on” by using a voice command or

■The number of cellular phones that can be registered Up to 6 cellular phones can be registered in the system.

277

3-4. Using the hands-free phone system (for cellular phone) Security and system setup

To enter the menu of each setting, follow the steps below: ■ Security setting items and operation procedure

● Setting or changing the PIN (Personal Identification Number)

1. “Setup” → 2. “Security” → 3. “Set PIN”

● Locking the phone book

1. “Setup” → 2. “Security” → 3. “Phonebook Lock”

● Unlocking the phone book

1. “Setup” → 2. “Security” → 3. “Phonebook Unlock”

■ System setup items and operation procedure

● Setting voice guidance volume

1. “Setup” → 2. “System Setup” → 3. “Guidance Volume”

● Initialization

1. “Setup” → 2. “System Setup” → 3. “Initialize”

can only be used for system setup operation.

Setting or changing the PIN

■ Setting a PIN

STEP 1

Select “Set PIN” by using a voice command or

STEP 2

Enter a PIN by using a voice command or

When using

, input the code 1 digit at a time.

278

3-4. Using the hands-free phone system (for cellular phone)

■ Changing the PIN

STEP 1

Select “Set PIN” by using a voice command or

STEP 2

Enter the registered PIN by using a voice command or

STEP 3

Enter a new PIN by using a voice command or

When using

, input the code 1 digit at a time.

Locking or unlocking the phone book

STEP 1

Select “Phonebook lock” or “Phonebook unlock” by using a

voice command or

STEP 2

Input the PIN by either of the following methods and select

“Confirm” by using a voice command or

a. Press the talk switch and say the registered PIN.

b. Input a new PIN by using

279

3-4. Using the hands-free phone system (for cellular phone)

Setting voice guidance volume

STEP 1

Select “Guidance Volume” by using

STEP 2

Change the voice guidance volume.

To decrease the volume: Turn

counterclockwise.

To increase the volume: Turn

clockwise.

Initialization

STEP 1

Select “Initialize” and then “Confirm” by using

STEP 2

Select “Confirm” by using

280

3-4. Using the hands-free phone system (for cellular phone)

■Initialization

●The following data in the system can be initialized:

• Phone book • Outgoing and incoming call history • Speed dials • Registered cellular phone data • Security code

●Once the initialization has been completed, the data cannot be restored

to its original state.

■When the phone book is locked

The following functions cannot be used: ●Dialing by inputting a name ●Speed dialing ●Dialing a number stored in the call history memory ●Using the phone book

281

3-4. Using the hands-free phone system (for cellular phone) Using the phone book

To enter the menu of each setting, follow the steps below:

● Adding a new phone number

1. “Phonebook” → 2. “Add Entry”

● Setting speed dial

1. “Phonebook” → 2. “Set Speed Dial (Speed Dial)”

● Changing a registered name

1. “Phonebook” → 2. “Change Name”

● Deleting registered data

1. “Phonebook” → 2. “Delete Entry”

● Deleting speed dial

1. “Phonebook” → 2. “Delete Speed Dial”

● Listing the registered data

1. “Phonebook” → 2. “List Names”

Adding a new phone number

The following methods can be used to add a new phone number: ● Inputting a phone number by using a voice command ● Transferring data from the cellular phone

● Inputting a phone number by using

● Selecting a phone number from outgoing or incoming call history

282

3-4. Using the hands-free phone system (for cellular phone)

■ Adding procedure

STEP 1

Select “Add Entry” by using a voice command or

STEP 2

Use one of the following methods to input a telephone num- ber:

Inputting a telephone number by using a voice command

STEP2-1 Select “By Voice” by using a voice command or

STEP2-2 Press the talk switch, say the desired number, and

select “Confirm” by using a voice command.

Transferring data from the cellular phone

STEP2-1 Select “By Phone” and then “Confirm” by using a

voice command or

STEP2-2 Transfer the data from the cellular phone.

Refer to the manual that comes with the cellular phone for the details of transferring data.

STEP2-3 Select the data to be registered by either of the fol-

lowing methods: a. Say “Previous” or “Next” until the desired data is displayed, and select “Confirm” by using a voice command.

b. Select the desired data by using

283

3-4. Using the hands-free phone system (for cellular phone)

Inputting a phone number by using

STEP2-1 Select “Manual Input” by using

STEP2-2 Input a phone number by using

, and press

once again.

Input the phone number 1 digit at a time.

Selecting a phone number from outgoing or incoming call history

STEP2-1 Select “Call History” by using a voice command or

STEP2-2 Select “Outgoing” or “Incoming” by using a voice

command or

STEP2-3 Select the data to be registered by either of the fol-

lowing methods: a. Say “Previous” or “Go back” until the desired data is displayed, and select “Confirm” by using a voice command.

b. Select the desired data by using