2010 Toyota Camry HV Owners Manual

ANTENNA

UPDATING

NO SIGNAL

LOADING

OFF AIR

CHANNEL OFF

or

AIR

-----

There is no song/program title or artist name/fea- ture associated with the channel at this time. No action needed.

199

3-2. Using the audio system

---

The channel you selected is no longer available. Wait for about 2 seconds until the radio returns to the previous channel or “CH001”. If it does not change automatically, select another channel.

Contact the XM® Listener Care Center at 1-800-967-2346 (U.S.A.) or 1-877- 438-9677 (Canada)

■Certifications for the radio tuner

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. How- ever, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by trying one or more of the following: ●Reorienting or relocating the receiving antenna. ●Increasing the separation between the equipment and receiver. ●Connecting the equipment into an outlet on a circuit different from that to

which the receiver is connected.

●Consulting the dealer or an experienced radio/TV technician for help.

200

3-2. Using the audio system Using the CD player

Type A

Power

Volume

CD eject

Playback

Fast-forward Reverse

Repeat play

CD load

Searching playback

Selecting a track

Searching playback

Displaying text messages

Random playback

Type B

Power

Volume

CD eject

Fast- forwarding and reversing

Playback

Selector buttons

Playback/pause Displaying text messages

201

3-2. Using the audio system

Loading CDs

■ Loading a CD (type A)

Insert a CD.

■ Loading a CD (type B) STEP 1

STEP 2

Press When the indicator on the slot turns from amber to green, insert a CD.

■ Loading multiple CDs (type B only) STEP 1

until you hear a beep.

Press and hold When the indicator on the slot turns from amber to green, insert a CD. The indicator on the slot turns to amber when the CD is inserted. When the indicator on the slot turns from amber to green again, insert the next CD. Repeat the procedure for the remaining CDs.

To cancel, press loading will be canceled automatically.

. If you do not insert a disc within 15 seconds,

STEP 2

STEP 3

202

3-2. Using the audio system

Ejecting CDs

■ Ejecting a CD (type A)

Press

and remove the CD.

■ Ejecting a CD (type B)

STEP 1

To select the CD to be ejected, press

that corre-

” or “

sponds to “ The selected CD number is shown on the display. Press

and remove the CD.

”.

STEP 2

■ Ejecting all the CDs (type B only)

until you hear a beep, and then remove the

Press and hold CDs.

Selecting a track

Press “∧” to move up or “∨” to move down using desired track number is displayed.

until the

Fast-forwarding and reversing tracks

Type A: Press Type B: Press and hold “∧” or “∨” on

) or

).

203

3-2. Using the audio system

Scanning tracks

STEP 1

Press

or

The first ten seconds of each track will be played.

To cancel, press

or

again.

STEP 2

Press

or

again when the desired track is reached.

Selecting a CD (type B only)

■ Selecting a CD to play

Press

that corresponds to “

” or “

”.

■ Scanning loaded CDs

STEP 1

Press and hold

until you hear a beep.

The first ten seconds of the first track on each CD will be played.

To cancel, press

again.

STEP 2

Press

again when the desired CD is reached.

Playing and pausing tracks (type B only)

Press

204

3-2. Using the audio system

Random playback

■ Current CD

(RAND) or

Press Songs are played in random order. To cancel, press the same button until “OFF” is displayed.

that corresponds to “RDM”.

■ All CDs (type B only)

Press

that corresponds to “RDM” twice.

Tracks on all loaded CDs are played in random order. To cancel, press the button again.

Repeat play

■ Repeating a track

Press

(RPT) or

that corresponds to “RPT”.

To cancel, press the same button until “OFF” is displayed.

■ Repeating all of the tracks on a CD (type B only)

Press

that corresponds to “RPT” twice.

To cancel, press the button again.

Switching the display

Press

or

Type A: Each time order: Track no./Elapsed time → CD title → Track name.

is pressed, the display changes in the following

205

3-2. Using the audio system

Type B: Each time order: Track title → Track name/Artist name → Track name/Elapsed time.

is pressed, the display changes in the following

■Display (type A)

Up to 12 characters can be displayed at a time.

If there are 13 characters or more, pressing and holding or more will display the remaining characters. A maximum of 24 characters can be displayed.

for 1 second

is pressed for 1 second or more again or has not been pressed for 6

If seconds or more, the display will return to the first 12 characters. Depending on the contents recorded, the characters may not be displayed properly or may not be displayed at all.

■Error messages

“CD CHECK”:

This indicates a problem either with the CD or inside the player. The CD may be dirty, dam- aged or inserted up-side down.

“WAIT” or “PLEASE WAIT”: Operation has stopped due to a high tempera- ture inside the player. Wait for a while and

or

then press . Contact your Toyota dealer if the CD still cannot be played back.

■Discs that can be used

Discs with the marks shown below can be used. Playback may not be possible depending on the recording format or disc features, or due to scratches, dirt or deterioration.

CDs with copy-protection features may not be used.

206

3-2. Using the audio system

■CD player protection feature

To protect the internal components, playback is automatically stopped when a problem is detected while the CD player is being used.

■If CDs are left inside the CD player or in the ejected position for

extended periods CDs may be damaged and may not play properly.

■Lens cleaners

Do not use lens cleaners. Doing so may damage the CD player.

NOTICE

■CDs and adapters that cannot be used

Do not use the following types of CDs, 3 in. (8 cm) CD adapters or Dual Discs. Doing so may damage the CD player and/or the CD insert/eject function.

●CD player with changer and AM/FM radio: CDs that have a diameter that is not 4.7 in. (12 cm)

●Low-quality and deformed CDs

207

3-2. Using the audio system

NOTICE

●CDs with a transparent or translucent

recording area

●CDs that have had tape, stickers or CD- R labels attached to them, or that have had the label peeled off

■CD player precautions

Failure to follow the precautions below may result in serious damage to the CDs or the player itself. ●Do not insert anything other than CDs into the CD slot. ●Do not apply oil to the CD player. ●Store CDs away from direct sunlight. ●Never try to disassemble any part of the CD player.

●Do not insert more than one CD at a

time.

208

3-2. Using the audio system Playing MP3 and WMA discs

Type A

Power

Volume

CD eject

Selecting a folder

Selecting a file

Playback

Selecting a file

Searching playback

Displaying text messages

Reversing

Fast-forwarding Repeat play Random playback

Type B

Power

Volume

Disc eject

Selecting a file

Disc load

Searching playback

Fast- forwarding and reversing

Selecting a folder and files

Playback

Selector buttons

Playback/pause Displaying text messages

209

3-2. Using the audio system

Loading and ejecting MP3 and WMA discs

→P. 202

Selecting MP3 and WMA discs (type B only)

→P. 204

Selecting and scanning a folder

■ Selecting folders one at a time

Press “∧” or “∨” on

or

to select the desired folder.

■ Scanning the first file of all the folders

STEP 1

Press and hold

or

until you hear a beep.

The first ten seconds of the first file in each folder will be played.

STEP 2

When the desired folder is reached, press again.

or

■ Returning to the first folder

Press and hold “∨” on

or

until you hear a beep.

210

3-2. Using the audio system

Selecting and scanning files

■ Selecting one file at a time

Turn

or

or press “∧” or “∨” on

or

to

select the desired file.

■ Selecting the desired file by cueing the files in the folder

Press

or

When the desired file is reached, press

or

once again.

Fast-forwarding and reversing files

Type A: Press Type B: Press and hold “∧” or “∨” on

) or

).

Playing and pausing files (type B only)

Press

Random playback

■ Playing files from a particular folder in random order

Press

(RAND) or

that corresponds to “RDM”.

To cancel, press the same button until “OFF” is displayed.

■ Playing all of the files on a disc in random order (type B only)

Press

that corresponds to “RDM” twice.

To cancel, press the button again.

211

3-2. Using the audio system

Repeat play

■ Repeating a file

Press

(RPT) or

that corresponds to “RPT”.

To cancel, press the same button until the “OFF” is displayed.

■ Repeating all of the files in a folder (type B only)

Type A: Press and hold

(RPT) until you hear a beep.

Type B: Press

that corresponds to “RPT” twice.

To cancel, press the button again.

■ Repeating all of the files in a disc (type B only) that corresponds to “RPT” three times.

Press

To cancel, press the same button again.

Switching the display

Press

or

is pressed, the display changes in the following

Type A: Each time order: Folder no./File no./Elapsed time → Folder name → File name → Album title (MP3 only) → Track title → Artist name.

is pressed, the display changes in the following

Type B: Each time order: Track title → Track title/Artist name → Track title/Album name → Track title/Elapsed time.

212

3-2. Using the audio system

■Display →P. 206

■Error messages

“CD CHECK”:

This indicates a problem either with the CD or inside the player. The CD may be dirty, dam- aged or inserted up-side down.

“WAIT” or “PLEASE WAIT”: Operation has stopped due to a high tempera- ture inside the player. Wait for a while and then

press dealer if the CD still cannot be played.

or

. Contact your Toyota

■Discs that can be used

→P. 206

■CD player protection feature

→P. 207

■If CDs are left inside the CD player or in the ejected position for

extended periods →P. 207

■Lens cleaners

→P. 207

213

3-2. Using the audio system

■MP3 and WMA files

MP3 (MPEG Audio LAYER3) is a standard audio compression format. Files can be compressed to approximately 1/10 of their original size by using MP3 compression. WMA (Windows Media TM Audio) is a Microsoft audio compression format. This format compresses audio data to a size smaller than that of the MP3
format. There is a limit to the MP3 and WMA file standards and to the media/formats recorded by them that can be used. ●MP3 file compatibility

• Compatible standards

MP3 (MPEG1 LAYER3, MPEG2 LSF LAYER3)

• Compatible sampling frequencies

MPEG1 LAYER3: 32, 44.1, 48 (kHz) MPEG2 LSF LAYER3: 16, 22.05, 24 (kHz)

• Compatible bit rates

MPEG1 LAYER3: 64, 80, 96, 112, 128, 160, 192, 224, 256, 320 (kbps) MPEG2 LSF LAYER3: 64, 80, 96, 112, 128, 144, 160 (kbps) * Compatible with VBR

• Compatible channel modes: stereo, joint stereo, dual channel and

monaural

●WMA file compatibility

• Compatible standards

WMA Ver. 7, 8, 9

• Compatible sampling frequencies

32, 44.1, 48 (kHz)

• Compatible bit rates

Ver. 7, 8: CBR 48, 64, 80, 96, 128, 160, 192 (kbps) Ver. 9: CBR 48, 64, 80, 96, 128, 160, 192, 256, 320 (kbps) * Only compatible with 2-channel playback

214

3-2. Using the audio system

●Compatible media

Media that can be used for MP3 and WMA playback are CD-Rs and CD- RWs. Playback in some instances may not be possible, depending on the status of the CD-R or CD-RW. Playback may not be possible or the audio may jump if the disc is scratched or marked with fingerprints.

●Compatible disc formats

The following disc formats can be used. • Disc formats: CD-ROM Mode 1 and Mode 2

CD-ROM XA Mode 2, Form 1 and Form 2
• File formats: ISO9660 Level 1, Level 2, (Romeo, Joliet)

MP3 and WMA files written in any format other than those listed above may not play correctly, and their file names and folder names may not be displayed correctly.

Items related to standards and limitations are as follows. • Maximum directory hierarchy: 8 levels • Maximum length of folder names/file names: 32 characters • Maximum number of folders: 192 (including the root) • Maximum number of files per disc: 255

●File names

The only files that can be recognized as MP3/WMA and played are those with the extension .mp3 or .wma.

●Multi-sessions

As the audio system is compatible with multi-sessions, it is possible to play discs that contain MP3 and WMA files. However, only the first session can be played.

●ID3 and WMA tags

ID3 tags can be added to MP3 files, making it possible to record the track title and artist name, etc. The system is compatible with ID3 Ver. 1.0, 1.1, and Ver. 2.2, 2.3 ID3 tags. (The number of characters is based on ID3 Ver. 1.0 and 1.1.) WMA tags can be added to WMA files, making it possible to record the track title and artist name in the same way as with ID3 tags.

215

3-2. Using the audio system

●MP3 and WMA playback

When a disc containing MP3 or WMA files is inserted, all files on the disc are first checked. Once the file check is finished, the first MP3 or WMA file is played. To make the file check finish more quickly, we recommend you do not write in any files other than MP3 or WMA files or create any unnec- essary folders. If the discs contain a mixture of music data and MP3 or WMA format data, only music data can be played.

●Extensions

If the file extensions .mp3 and .wma are used for files other than MP3 and WMA files, they will be mistakenly recognized and played as MP3 and WMA files. This may result in large amounts of interference and damage to the speakers.

●Playback

• To play MP3 files with steady sound quality, we recommend a fixed bit

rate of 128 kbps and a sampling frequency of 44.1 kHz.

• CD-R or CD-RW playback may not be possible in some instances,

depending on the characteristics of the disc.

• There is a wide variety of freeware and other encoding software for MP3 and WMA files on the market, and depending on the status of the encoding and the file format, poor sound quality or noise at the start of playback may result. In some cases, playback may not be possible at all.

• When files other than MP3 or WMA files are recorded on a disc, it may take more time to recognize the disc. In some cases, playback may not be possible at all.

• Microsoft, Windows, and Windows Media are the registered trade-

marks of Microsoft Corporation in the U.S. and other countries.

NOTICE

■CDs and adapters that cannot be used (→P. 207) ■CD player precautions (→P. 208)

216

3-2. Using the audio system Operating an iPod® player∗

Connecting an iPod® player enables you to enjoy music from the vehicle speakers. ■ Connecting an iPod® player STEP 1

Open the cover and connect iPod® player using an an iPod® cable.

STEP 2

Press

■ Control panel

Power

Volume

Selector knob

Fast- forwarding and reversing

Playback

Selector buttons

Displaying text messages

Playback/pause

∗: If equipped 217

3-2. Using the audio system

Selecting a play mode

STEP 1

Press menu mode.

that corresponds to “BROWSE” to select iPod®

STEP 2

Press

that corresponds to the desired play mode.

Second selection

Third selection

Fourth selection

■ Play mode list

Play mode

PLIST

First

selection

Playlist select

ARTIST

Artist select

ALBUM

Albums select

Songs select Albums select Songs select

GENRE

Genre select

Artists select

SONGS

PODCST

COMPSR

BOOK

Songs select Albums select Composers select Songs select

Songs select Albums select

Songs select

Albums select

Songs select

Songs select

Depending on the model, the name of your iPod® may be displayed at the top of the list.

218

3-2. Using the audio system

■ Selecting a list

STEP 1

Turn

to display the first selection list.

STEP 2

Press

to select the desired item.

that corresponds to “MORE” changes to the second

Pressing selection list. Repeat the same procedure to select the desired song name.

STEP 3

To return to the previous selection list, press

that corresponds

to “

”.

Selecting songs from a list

STEP 1

Press The current play list is displayed.

that corresponds to “LIST”.

STEP 2

Turning

to select the desired song.

returns the screen from list display to the previous

Press

screen.

219

3-2. Using the audio system

Selecting songs

Turn

or press “∧” or “∨” on

to select the desired song.

Playing and pausing songs

Press

Fast-forwarding and reversing songs

Press and hold “∧” or “∨” on

Shuffle playback

■ Playing songs from one playlist or album in random order

Press To cancel, press the button twice.

that corresponds to “RDM”.

■ Playing songs from all the playlists or albums in random order

Press To cancel, press the button again.

that corresponds to “RDM” twice.

Repeat play

Press

that corresponds to “RPT”.

To cancel, press the button again. Even when the repeat play option has not been selected, playback will automatically continue from the first song in the current play list once the last song has ended.

220

3-2. Using the audio system

Switching the display

Press

is pressed, the display changes in the following order:

Each time Track title → Track title/Artist name → Track title/Album name → Track title/Elapsed time

■About iPod®

iPod® is registered trademarks of Apple computer, Inc.

■iPod® player functions

●When an iPod player® is connected and the audio source is changed to iPod® player mode, the iPod® player will resume play from the same point in which it was last used.

●Depending on the iPod® player that is connected to the system, certain functions may not be available. Disconnecting the device and reconnect- ing it once again may resolve some malfunctions.

■iPod® player problems

To resolve most problems encountered when using your iPod® player, dis- connect your iPod® player from the vehicle iPod® player connection and reset it. For instructions on how to reset your iPod® player, refer to your iPod® player Owner's Manual.

■Cable pass-through

→P. 299

221

3-2. Using the audio system

■Error messages “IPOD ERROR”:

“NO SONGS”:

This indicates a problem in the iPod® player, inside the USB box or the connection between them. This indicates that there is no music data in the iPod® player.

“UPDATE YOUR IPOD”: This indicates that the version of the iPod® player

is not compatible.

■Compatible models

●iPod® 5th generation Version 1.2 or later ●iPod® nano 3rd generation Version 1.0 or later ●iPod® nano 2nd generation Version 1.1.2 or later ●iPod® nano Version 1.2 or later ●iPod® touch Version 1.1 or later ●iPod® classic Version 1.0 or later iPhone®, iPod® mini, iPod® shuffle, iPod® photo and 4th generation and ear- lier models of iPod® are not compatible with this system. Items related to standards and limitations are as follows: ●Maximum number of lists in device: 9999
●Maximum number of songs in device: 65,025
●Maximum number of songs per list: 65,025

222

3-2. Using the audio system

CAUTION

■Caution while driving

Do not connect iPod® players or operate the controls.

NOTICE

■To prevent damage to iPod® players

●Do not leave iPod® players in the vehicle. The temperature inside may

become high, resulting in damage to the player.

●Do not push down on or apply unnecessary pressure to the iPod® player while it is connected as this may damage the iPod® player or its terminal. ●Do not insert foreign objects into the port as this may damage the iPod®

player or its terminal.

223

3-2. Using the audio system Operating a USB memory player∗

Connecting a USB memory player enables you to enjoy music from the vehicle speakers. ■ Connecting a USB memory player STEP 1

Open the cover and connect a USB memory player.

STEP 2

Press

■ Control panel

Power

Volume

Selector knob

Selecting a folder and files

Searching playback

Playback/pause

Playback

Selector buttons

Displaying text messages

∗: If equipped

Fast- forwarding and reversing

224

3-2. Using the audio system

Selecting and scanning a folder

■ Selecting a folder Press “∧” or “∨” on

to select the desired folder.

■ Returning to the first file of the first folder

Press and hold “∨” on

until you hear a beep.

■ Scanning the first file of all the folders

STEP 1

Press and hold

until you hear a beep.

The first ten seconds of the first file in each folder will be played.

STEP 2

When the desired folder is reached, press

again.

Selecting and scanning files

■ Selecting a file

Turn

or press “∧” or “∨” on

to select the desired file.

■ Scanning the files in a folder

Press

The first ten seconds of each file will be played.

To cancel, press

again.

When the desired file is reached, press

again.

225

3-2. Using the audio system

Playing and pausing files

Press

Fast-forwarding and reversing files

Press and hold “∧” or “∨” on

Random playback

■ Playing files from a folder in random order

Press

that corresponds to “RDM”.

To cancel, press the button twice.

■ Playing all the files from a USB memory player in random

order Press To cancel, press the button again.

that corresponds to “RDM” twice.

Repeat play

■ Repeating a file

Press

that corresponds to “RPT”.

To cancel, press the button twice.

■ Repeating all the files in a folder

Press

that corresponds to “RPT” twice.

To cancel, press the button again.

226

3-2. Using the audio system

Switching the display

Press the

is pressed, the display changes in the following order:

Each time Track title → Track title/Artist name → Track title/Album name → Track title/Elapsed time

■USB memory player functions

Depending on the USB memory player that is connected to the system, cer- tain functions may not be available. Disconnecting the device and recon- necting it once again may resolve some malfunctions.

■Cable pass-through

→P. 299

■Error messages

“USB ERROR”: This indicates a problem in the USB memory player or its

“NO MUSIC”:

connection. This indicates that no MP3/WMA files are included in the USB memory player.

227

3-2. Using the audio system

■USB memory player ●Compatible device

USB memory players that can be used for MP3 and WMA playback. Depending on the type of USB device, playback may not be possible.

●Compatible device formats

The following device formats can be used: • USB communication formats: USB2.0 FS (12 mbps) • File formats: FAT16/32 (Windows) • Correspondence class: Mass storage class

MP3 and WMA files written in any format other than those listed above may not play correctly, and their file names and folder names may not be displayed correctly.

Items related to standards and limitations are as follows: • Maximum directory hierarchy: 8 levels • Maximum number of folder in device: 999 (including the root) • Maximum number of files in device: 65,025
• Maximum number of files per folder: 255

●MP3 and WMA files MP3 (MPEG Audio LAYER 3) is a standard audio compression format. Files can be compressed to approximately 1/10 of their original size using MP3 compression. WMA (Windows MediaTM Audio) is a Microsoft audio compression format. This format compresses audio data to a size smaller than that of the MP3
format. There is a limit to the MP3 and WMA file standards that can be used and to the media/formats on which the files are recorded.

228

3-2. Using the audio system

●MP3 file compatibility

• Compatible standards

MP3 (MPEG1 AUDIO LAYERII, III, MPEG2 AUDIO LAYERII, III, MPEG2.5)

• Compatible sampling frequencies

MPEG1 AUDIO LAYERII, III: 32, 44.1, 48 (kHz) MPEG2 AUDIO LAYERII, III: 16, 22.05, 24 (kHz) MPEG2.5: 8, 11.025, 12 (kHz)

• Compatible bit rates (compatible with VBR) MPEG1 AUDIO LAYERII, III: 32-320 (kbps) MPEG2 AUDIO LAYERII, III: 32-160 (kbps) MPEG2.5: 32-160 (kbps)

• Compatible channel modes: stereo, joint stereo, dual channel and

monaural

●WMA file compatibility

• Compatible standards

WMA Ver. 9

• Compatible sampling frequencies HIGH PROFILE 32, 44.1, 48 (kHz)

• Compatible bit rates

HIGH PROFILE 32-320 (kbps, VBR)

●File names

The only files that can be recognized as MP3/WMA and played are those with the extension .mp3 or .wma.

●ID3 and WMA tags

ID3 tags can be added to MP3 files, making it possible to record the track title, artist name, etc. The system is compatible with ID3 Ver. 1.0, 1.1, and Ver. 2.2, 2.3, 2.4 ID3
tags. (The number of characters is based on ID3 Ver. 1.0 and 1.1.) WMA tags can be added to WMA files, making it possible to record the track title and artist name in the same way as with ID3 tags.

●MP3 and WMA playback

When a device containing MP3 or WMA files is plugged, all files in the USB memory device are first checked. Once the file check is finished, the first MP3 or WMA file is played. To make the file check finish more quickly, we recommend you do not write in any files other than MP3 or WMA files or create any unnecessary folders.

229

3-2. Using the audio system

●Extensions

If the file extensions .mp3 and .wma are used for files other than MP3 and WMA files, they will be mistakenly recognized and played as MP3 and WMA files. This may result in large amounts of interference and damage to the speakers.

●Playback

• To play MP3 file with steady sound quality, we recommend a fixed bit

rate of at least 128 kbps and a sampling frequency of 44.1 kHz.

• There is a wide variety of freeware and other encoding software for MP3 and WMA files on the market, and depending on the status of the encoding and the file format, poor sound quality or noise at the start of playback may result. In some cases, playback may not be possible at all.

• Microsoft, Windows, and Windows Media are the registered trade-

marks of Microsoft Corporation in the U.S.A. and other countries.

CAUTION

■Caution while driving

Do not use a USB memory player, or connect a USB memory player.

NOTICE

■To prevent damage to a USB memory player

●Do not leave a USB memory player in the vehicle. The temperature inside

may become high, resulting in damage to the player.

●Do not push down on or apply unnecessary pressure to the USB memory player while it is connected as this may damage the USB memory player or its terminal.

●Do not insert foreign objects into the port as this may damage the USB

memory player or its terminal.

230

3-2. Using the audio system Optimal use of the audio system

Type A

Type B

Adjusting the sound quality and ASL

Adjusting the sound quality

Menu button

Selector buttons

231

3-2. Using the audio system

Using the audio control function

■ Changing sound quality modes

Type A

selects the mode to be changed in the following

Pressing order: “BAS”→“TRE”→“FAD”→“BAL”→“ASL” Type B

STEP 1

Press

STEP 2

that corresponds to the desired mode.

Press “BASS”, “MID”, “TREB”, “FADE” or “BAL”

■ Adjusting sound quality

Turning

or

adjusts the level.

Type A

Mode displayed

BAS TRE

FAD

BAL

Sound qual-

ity mode Bass* Treble* Front/rear volume balance Left/right volume balance

Level

-5 to 5
-5 to 5

Turn to the

left

Turn to the

right

Low

High

F7 to R7

Shifts to rear

Shifts to

front

L7 to R7

Shifts to left Shifts to right

*: The sound quality level is adjusted individually in each radio

mode or CD mode.

232

3-2. Using the audio system

Type B

Mode displayed

BASS MID TREB

FADE

BAL

Sound qual-

ity mode Bass*

Mid-range*

Treble* Front/rear volume balance Left/right volume balance

Turn to the

left

Turn to the

right

Low

High

Level

-5 to 5
-5 to 5
-5 to 5

F7 to R7

Shifts to rear

Shifts to

front

L7 to R7

Shifts to left Shifts to right

*: The sound quality level is adjusted individually in each audio

mode.

■ Adjusting the Automatic Sound Levelizer (ASL)

Type A

When “ASL” is selected, turning

to the right changes the

“ASL” level in the order of “LOW”, “MID” and “HIGH”.

Turning

to the left turns “ASL” off.

ASL automatically adjusts the volume and tone quality according to vehi- cle speed.

233

3-2. Using the audio system

Type B

STEP 1

Press

STEP 2

Press

that corresponds to “MORE”.

STEP 3

Press

that corresponds to “ASL”.

STEP 4

Press

that corresponds to “ON” or “OFF”.

ASL automatically adjusts the volume and tone quality according to vehi- cle speed.

■ Setting the number of preset pages (type B only) The number of preset pages desired can be set from 1 to 6. The initial setting is 6 pages.

STEP 1

Press

STEP 2

STEP 3

STEP 4

Press Press Press pages.

that corresponds to “MORE”. that corresponds to “PRESET”. that corresponds to the desired number of preset

■ Language settings (type B only)

→P. 192

234

3-2. Using the audio system

■Trademark owned by SRS Labs, Inc. (type A only)

The audio systems utilize SRS FOCUS® and SRS TruBass® audio enhancement technologies, under license from SRS Labs, Inc., in all modes except AM radio mode.

FOCUS, TruBass, SRS and Inc. FOCUS and TruBass technologies are incorporated under license from SRS Labs, Inc.

symbols are trademarks of SRS Labs,

235

3-2. Using the audio system Using the AUX adapter

This adapter can be used to connect a portable audio device and lis- ten to it through the vehicle’s speakers. STEP 1

Open the cover and connect the portable audio device.

Type A

Type B

STEP 2

Press

or

236

3-2. Using the audio system

■Operating portable audio devices connected to the audio system

The volume can be adjusted using the vehicle's audio controls. All other adjustments must be made on the portable audio device itself.

■When using a portable audio device connected to the power outlet

Noise may occur during playback. Use the power source of the portable audio device.

■Cable pass-through

→P. 299

237

3-2. Using the audio system Using the steering wheel audio switches

Some audio features can be controlled using the switches on the steering wheel.

vol-

Increases/decreases ume Radio mode: Select radio stations CD mode: Select tracks, files (MP3 and WMA) and discs iPod® player mode: Selects a song

USB memory player mode: file and

Selects a folder

Bluetooth® audio mode:

Selects a track and album

Turn the power on, selects an audio source

238

3-2. Using the audio system

Turning the power on

Press

when the audio system is turned off.

The audio system can be turned off by holding the switch down until you hear a beep.

Changing the audio source

when the audio system is turned on. The audio source

Press changes as follows each time the switch is pressed. Type A:

FM1→FM2→CD→AUX→AM→SAT1→SAT2→SAT3

Type B:

FM→SAT→CD→CD changer→Bluetooth® Audio→AUX→ USB/iPod®→AM

Adjusting the volume

Press “+” on volume.

to increase the volume and “-” to decrease the

Press and hold the switch to continue increasing or decreasing the vol- ume.

Selecting a radio station

STEP 1

STEP 2

Press Press “∨” or “∧” on

to select the radio mode.

to select a preset station.

To scan for receivable stations, press and hold “∨” or “∧” on until you hear a beep.

239

3-2. Using the audio system

Selecting a track/file or folder

STEP 1