2010 Toyota 4runner Owners Manual

(RPT).

To cancel, press the button again. Even when the repeat play option has not been selected, playback will automatically continue from the first song in the current play list once the last song has ended.

345

3-2. Using the audio system

Switching the display

Press

is pressed, the display changes in the following

Each time order: Track title → Track title/Artist name → Track title/Album name → Track title/Elapsed time

■About iPod®

iPod® is a registered trademark of Apple computer, Inc.

■iPod® functions

●When an iPod® is connected and the audio source is changed to iPod® mode, the iPod® will resume play from the same point in which it was last used.

●Depending on the iPod® that is connected to the system, certain func- tions may not be available. Disconnecting the device and reconnecting it once again may resolve some malfunctions.

■iPod® problems

To resolve most problems encountered when using your iPod®, disconnect your iPod® from the vehicle iPod® connection and reset it. For instructions on how to reset your iPod®, refer to your iPod® Owner's Manual.

■Error messages

“iPod ERROR”:

“NO SONGS”:

This indicates a problem in the iPod®, inside the USB box or the connection between them. This indicates that there is no music data in the iPod®.

“UPDATE YOUR iPod”: This indicates that the version of the iPod® is not

compatible.

346

3-2. Using the audio system

■Compatible models

●iPod® 5th generation Version 1.2 or later ●iPod® nano 3rd generation Version 1.0 or later ●iPod® nano 2nd generation Version 1.1.2 or later ●iPod® nano Version 1.3 or later ●iPod® touch Version 1.1 or later ●iPod® classic Version 1.0 or later iPhone®, iPod® mini, iPod® shuffle, iPod® photo and 4th generation and ear- lier models of iPod® are not compatible with this system. Items related to standards and limitations are as follows: ●Maximum number of lists in a device: 9999
●Maximum number of songs in a device: 65025
●Maximum number of songs per list: 65025

CAUTION

■Caution while driving

Do not connect iPod® or operate the controls.

NOTICE

■To prevent damage to iPod®

●Do not leave iPod® in the vehicle. The temperature inside may become

high, resulting in damage to the player.

●Do not push down on or apply unnecessary pressure to the iPod® while it

is connected as this may damage the iPod® or its terminal.

●Do not insert foreign objects into the port as this may damage the iPod® or

its terminal.

347

3-2. Using the audio system Operating a USB memory∗

Connecting a USB memory enables you to enjoy music from the vehicle speakers. ■ Connecting a USB memory

STEP 1

Open the glove box and con- nect a USB memory.

STEP 2

Press

CTH32AS024

348

∗: If equipped

3-2. Using the audio system

■ Control panel

Power

Volume

Selecting a track/ fast-forwarding and rewinding

Selector knob

Selecting a folder and file

Selector buttons

Searching playback

Playback/pause

Displaying text messages

Playback

Selecting and scanning a folder

■ Selecting a folder

Press “∧” or “∨” on

to select the desired folder.

■ Returning to the first file of the first folder

Press and hold “∨” on

until you hear a beep.

■ Scanning the first file of all the folders

STEP 1

STEP 2

Press and hold The first ten seconds of the first file in each folder will be played. When the desired folder is reached, press again.

until you hear a beep.

349

3-2. Using the audio system

Selecting and scanning files

■ Selecting a file

Turn

or press “∧” or “∨” on

to select the desired file.

■ Scanning the files in a folder

Press

The first ten seconds of each file will be played.

To cancel, press

again.

When the desired file is reached, press

again.

Playing and pausing files

Press

Fast-forwarding and rewinding files

Press and hold “∧” or “∨” on

Random playback

■ Playing files from a folder in random order

Press

(RDM).

To cancel, press the button twice.

■ Playing all the files from a USB memory in random order

Press To cancel, press the button again.

(RDM) twice.

350

Repeat play

■ Repeating a file

Press

(RPT).

To cancel, press the button twice.

■ Repeating all the files in a folder

Press

(RPT) twice.

To cancel, press the button again.

Switching the display

Press

3-2. Using the audio system

is pressed, the display changes in the following

Each time order: Track title → Track title/Artist name → Track title/Album name → Track title/Elapsed time

■USB memory functions

Depending on the USB memory that is connected to the system, certain functions may not be available. Disconnecting the device and reconnecting it once again may resolve some malfunctions.

■Error messages

“USB ERROR”: This indicates a problem either in the USB memory or

inside the USB box or connection between them.

“NO SUPPORT”: This indicates that no MP3/WMA files are included in the

USB memory.

351

3-2. Using the audio system

■USB memory

●Compatible device

USB memory that can be used for MP3 and WMA playback. Depending on the type of USB device, playback may not be possible.

●Compatible device formats

The following device formats can be used: • USB communication formats: USB2.0 FS (12 mbps) • File formats: FAT16/32 (Windows) • Correspondence class: Mass storage class

MP3 and WMA files written in any format other than those listed above may not play correctly, and their file names and folder names may not be displayed correctly.

Items related to standards and limitations are as follows: • Maximum directory hierarchy: 8 levels • Maximum number of folder in device: 999 (including the root) • Maximum number of files in device: 65025
• Maximum number of files per folder: 255

●MP3 and WMA files MP3 (MPEG Audio LAYER 3) is a standard audio compression format. Files can be compressed to approximately 1/10 of their original size using MP3 compression. WMA (Windows MediaTM Audio) is a Microsoft audio compression format. This format compresses audio data to a size smaller than that of the MP3
format. There is a limit to the MP3 and WMA file standards that can be used and to the media/formats on which the files are recorded.

352

3-2. Using the audio system

●MP3 file compatibility

• Compatible standards

MP3 (MPEG1 AUDIO LAYERII, III, MPEG2 AUDIO LAYERII, III, MPEG2.5)

• Compatible sampling frequencies

MPEG1 AUDIO LAYERII, III: 32, 44.1, 48 (kHz) MPEG2 AUDIO LAYERII, III: 16, 22.05, 24 (kHz) MPEG2.5: 8, 11.025, 12 (kHz)

• Compatible bit rates (compatible with VBR) MPEG1 AUDIO LAYERII, III: 32-320 (kbps) MPEG2 AUDIO LAYERII, III: 32-160 (kbps) MPEG2.5: 32-160 (kbps)

• Compatible channel modes: stereo, joint stereo, dual channel and

monaural

●WMA file compatibility

• Compatible standards

WMA Ver. 9

• Compatible sampling frequencies HIGH PROFILE 32, 44.1, 48 (kHz)

• Compatible bit rates

HIGH PROFILE 32-320 (kbps, VBR)

●File names

The only files that can be recognized as MP3/WMA and played are those with the extension .mp3 or .wma.

●ID3 and WMA tags

ID3 tags can be added to MP3 files, making it possible to record the track title, artist name, etc. The system is compatible with ID3 Ver. 1.0, 1.1, and Ver. 2.2, 2.3, 2.4 ID3
tags. (The number of characters is based on ID3 Ver. 1.0 and 1.1.) WMA tags can be added to WMA files, making it possible to record the track title and artist name in the same way as with ID3 tags.

●MP3 and WMA playback

When a device containing MP3 or WMA files is plugged, all files in the USB memory device are first checked. Once the file check is finished, the first MP3 or WMA file is played. To make the file check finish more quickly, we recommend you do not write in any files other than MP3 or WMA files or create any unnecessary folders.

353

3-2. Using the audio system

●Extensions

If the file extensions .mp3 and .wma are used for files other than MP3 and WMA files, they will be mistakenly recognized and played as MP3 and WMA files. This may result in large amounts of interference and damage to the speakers.

●Playback

• To play MP3 file with steady sound quality, we recommend a fixed bit

rate of at least 128 kbps and a sampling frequency of 44.1 kHz.

• There is a wide variety of freeware and other encoding software for MP3 and WMA files on the market, and depending on the status of the encoding and the file format, poor sound quality or noise at the start of playback may result. In some cases, playback may not be possible at all.

• Microsoft, Windows, and Windows Media are the registered trade-

marks of Microsoft Corporation in the U.S.A. and other countries.

CAUTION

■Caution while driving

Do not use a USB memory, or connect a USB memory.

NOTICE

■To prevent damage to a USB memory

●Do not leave a USB memory in the vehicle. The temperature inside may

become high, resulting in damage to the player.

●Do not push down on or apply unnecessary pressure to the USB memory while it is connected as this may damage the USB memory or its terminal. ●Do not insert foreign objects into the port as this may damage the USB

memory or its terminal.

354

3-2. Using the audio system Optimal use of the audio system

Type A

Adjusting the sound quality and ASL

Type B and C

Selector buttons

Adjusting the sound quality and ASL

Menu button

355

3-2. Using the audio system

Using the audio control function

■ Changing sound quality modes Type A

Pressing

selects the mode to be changed in the following

order: “BAS”→“TRE”→“FAD”→“BAL”→“ASL”

STEP 1

Type B and C Press Press corresponds to the desired mode. “BASS”, “MID” (type C only), “TREB”, “FADE”, or “BAL”

or

STEP 2

(type C only) as

■ Adjusting sound quality

Turning

or

adjusts the level.

Type A

Mode displayed

BAS TRE

FAD

BAL

Sound qual-

ity mode Bass* Treble* Front/rear volume balance Left/right volume balance

Level

-5 to 5
-5 to 5

Turn to the

left

Turn to the

right

Low

High

F7 to R7

Shifts to rear

Shifts to

front

L7 to R7

Shifts to left Shifts to right

*: The sound quality level is adjusted individually in each radio

mode or CD mode.

356

3-2. Using the audio system

Type B and C

Mode displayed

BASS

MID

TREB

FADE

BAL

Sound qual-

ity mode Bass*

Mid-range* (type C only)

Treble* Front/rear volume balance Left/right volume balance

Turn to the

left

Turn to the

right

Low

High

Level

-5 to 5

-5 to 5

-5 to 5

F7 to R7

Shifts to rear

Shifts to

front

L7 to R7

Shifts to left Shifts to right

*: The sound quality level is adjusted individually in each audio

mode.

■ Adjusting the Automatic Sound Levelizer (ASL) Type A

When “ASL” is selected, turning

to the right changes the

“ASL” level in the order of “LOW”, “MID” and “HIGH”.

Turning

to the left turns “ASL” off.

ASL automatically adjusts the volume and tone quality according to vehi- cle speed.

357

3-2. Using the audio system

STEP 1

STEP 3

STEP 2

(MORE). (ASL).

Type B and C Press Press Press Press only) as corresponds to the desired mode. Type B: “LOW”, “MID”, “HIGH”, or “OFF” Type C: “ON” or “OFF”

STEP 4

(type B only) or

(type B

ASL automatically adjusts the volume and tone quality according to vehicle speed.

■ Setting the number of preset pages (type B and C) The number of preset pages desired can be set from 1 to 6. The initial setting is 6 pages.

STEP 1

STEP 2

STEP 3

STEP 4

Press Press Press Press or sponds to the desired number of preset pages.

(MORE). (PRESET).

as corre-

■ Language settings (type B and C)

→P. 315

358

3-2. Using the audio system

Party mode switch

You can switch the sounds quality types by pressing the switch.

Base mode Party mode In party mode, the sound volume from the speakers on the back door is bigger than in base mode. (The output from the speakers on the rear doors will be transferred to the back door speakers.)

CTH32AS048

■Trademark owned by SRS Labs, Inc. (type B and C)

The audio systems utilize SRS FOCUSTM and SRS TruBass® audio enhancement technologies, under license from SRS Labs, Inc., in all modes except AM radio mode.

FOCUS, TruBass, SRS and Inc. FOCUS and TruBass technologies are incorporated under license from SRS Labs, Inc.

symbols are trademarks of SRS Labs,

359

3-2. Using the audio system Using the AUX adapter

This adapter can be used to connect a portable audio device and lis- ten to it through the vehicle’s speakers.

STEP 1

Open the cover and connect the portable audio device.

STEP 2

Press

or

CTH32AS023

■Operating portable audio devices connected to the audio system

The volume can be adjusted using the vehicle's audio controls. All the other adjustments must be made on the portable audio device itself.

■When using a portable audio device connected to the power outlet

Noise may occur during playback. Use the power source of the portable audio device.

360

3-2. Using the audio system Using the steering wheel audio switches∗

Some audio features can be controlled using the switches on the steering wheel.

CTH32AS046

vol-

Increases/decreases ume Radio mode: Selects radio stations CD mode: Selects tracks, files (MP3 and WMA) and discs (type C only) iPod® mode:

Selects a song USB memory mode:

Selects a folder

file and

Bluetooth® audio mode:

Selects a track and album

Turns the power on, selects an audio source

∗: If equipped 361

3-2. Using the audio system

Turning the power on

Press

when the audio system is turned off.

The audio system can be turned off by holding the switch down until you hear a beep.

Changing the audio source

when the audio system is turned on. The audio source

Press changes as follows each time the switch is pressed. If no discs are inserted in the player, that mode will be skipped. FM→SAT→CD (type B only)→CD changer (type C only)→Bluetooth® Audio→AUX→USB/iPod®→AM

Adjusting the volume

Press “+” on volume.

to increase the volume and “-” to decrease the

Press and hold the switch to continue increasing or decreasing the vol- ume.

Selecting a radio station

Press Press “∨” or “∧” on

to select radio mode.

to select a radio station.

To scan for receivable stations, press and hold “∨” or “∧” on until you hear a beep.

STEP 1

STEP 2

362

3-2. Using the audio system

Selecting a track/file or song

to select CD, iPod®, USB memory or Bluetooth®

to select the desired track/file or

STEP 1

STEP 2

Press audio mode. Press “∨” or “∧” on song.

Selecting a folder or album

to select the CD, USB memory or Bluetooth®

STEP 1

STEP 2

Press audio mode. Press and hold “∨” or “∧” on

until you hear a beep.

Selecting a disc in the CD player (type C only)

STEP 1

STEP 2

Press Press and hold “∨” or “∧” on

to select CD mode.

until you hear a beep.

CAUTION

■To reduce the risk of an accident

Exercise care when operating the audio switches on the steering wheel.

363

3-3. Using the Bluetooth® audio system Bluetooth® audio system∗

The Bluetooth® audio system enables you to enjoy music played on a portable digital audio player (portable player) from the vehicle speakers via wireless communication. This audio system supports Bluetooth®, a wireless data system capable of playing portable audio music without cables. If your por- table player does not support Bluetooth®, the Bluetooth® audio sys- tem will not function. Owners of models equipped with a navigation system should refer to the “Navigation System Owner's Manual”.

Title

Using the Bluetooth® audio system Operating a Bluetooth® enabled portable player Setting up a Bluetooth® enabled portable player Bluetooth® audio system setup

Page P. 367
P. 372
P. 374
P. 379

■Conditions under which the system will not operate

●If using a portable player that does not support Bluetooth® ●If the portable player is switched off ●If the portable player is not connected ●If the portable player’s battery is low ●If the portable player is behind the seat or in the glove box or console box ●If metal is covering or touching the portable player

364

∗: If equipped

3-3. Using the Bluetooth® audio system

■When transferring ownership of the vehicle

Be sure to initialize the system to prevent personal data from being improp- erly accessed. (→P. 403)

■About Bluetooth®

Bluetooth is a registered trademark of Bluetooth SIG. Inc.

■Compatible models

●Bluetooth® specifications:

Ver. 1.2

●Following Profiles:

• A2DP (Advanced Audio Distribution Profile) Ver. 1.0
• AVRCP (Audio/Video Remote Control Profile) Ver. 1.0 or higher (Ver.

1.3 or higher recommended)

Portable players must correspond to the above specifications in order to be connected to the Bluetooth® audio system. However, please note that some functions may be limited depending on the type of portable player.

■Certification for the Bluetooth® audio system

775E-K025

FCC ID: AJDK025
IC ID: MADE IN JAPAN This device complies with Part 15 of the FCC Rules and RSS-Gen of IC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired oper- ation.

365

3-3. Using the Bluetooth® audio system

CAUTION

■FCC WARNING

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Radio Frequency Radiation Exposure. This equipment complies with FCC/ IC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply with- out maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated with at least 7.9 in. (20 cm) and more between the radiator and person’s body (excluding extremities: hands, wrists, feet and ankles). This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

■Caution while driving

Do not connect portable players or operate the controls.

NOTICE

■To prevent damage to portable players

Do not leave portable players in the vehicle. The temperature inside the vehicle may become high, resulting in damage to the player.

366

3-3. Using the Bluetooth® audio system Using the Bluetooth® audio system

■ Audio unit

Display Track title, Artist name, Album name, Elapsed time, “Streaming Audio”, etc. is displayed. Selects items such as menu and number Turn: Selects an item Press: Inputs the selected item Bluetooth-Audio tion condition

connec-

If “BT” is not displayed, the Bluetooth® audio system cannot be used.

367

■ Microphone

CTH33AS001

3-3. Using the Bluetooth® audio system

Operating the system using voice commands

By following voice guidance instructions output from the speaker, voice commands enable to the operation of the Bluetooth® audio sys-

tem without the need to check the display or operate

■ Operation procedure when using voice commands

Press the talk switch and follow voice guidance instructions.

■ Auxiliary commands when using voice commands

The following auxiliary commands can be used when operating the system using a voice command: “Cancel”: Exits the Bluetooth® audio setup “Repeat”: Repeats the previous voice guidance instruction “Go back”: Returns to the previous procedure “Help”: Reads aloud the function summary if a help comment is registered for the selected function

368

3-3. Using the Bluetooth® audio system

Using the Bluetooth® audio system for the first time

Before using the Bluetooth® audio system, it is necessary to register a Bluetooth® enabled portable player in the system. Follow the proce- dure below to register (pair) a portable player:

STEP 1

STEP 2

Press and hold Press

(SETUP).

until “BT AUDIO” is displayed.

The introductory guidance and portable player name registration instructions are heard.

STEP 3

Select “Pair Audio Players (Pair audio player)” using a voice

command or

STEP 4

Register a portable player name by either of the following methods:

a. Select “Record Name” using

, and say the name to

be registered.

b. Press the talk switch and say the name to be registered.

A voice guidance instruction to confirm the input is heard.

STEP 5

Select “Confirm” using a voice command or

A passkey is displayed and heard, and a voice guidance instruction for inputting the passkey into the portable player is heard.

369

3-3. Using the Bluetooth® audio system

STEP 6

Input the passkey into the portable player. Refer to the manual that comes with the portable player for the oper- ation of the portable player.

Guidance for registration completion is heard. If the portable player has a Bluetooth® phone, the phone can be reg- istered at the same time. (→P. 386)

Menu list of the Bluetooth® audio system

First menu

Second menu

Third menu

Operation detail

Setup (Setup)

Pair Audio Players (Pair audio player) Select Audio Player

Change Name

List Audio Players Set Passkey Delete Audio Player Guidance Vol- ume

Device Name

Reset Setting

BT Audio Setup (BT audio setup)

System Setup

Registering a portable player

Selecting a portable player to be used Changing the registered name of a portable player Listing the registered porta- ble players Changing the passkey Deleting a registered porta- ble player Setting voice guidance vol- ume Displaying the Bluetooth® device address and name Initializing the system

“BT Audio Setup” can be canceled by pressing the on-hook switch or saying the voice command, “Cancel”.

370

3-3. Using the Bluetooth® audio system

■When using a voice command

For numbers, say a combination of single digits from zero to nine. Say the command correctly and clearly.

■Situations that the system may not recognize your voice

●When driving on rough roads ●When driving at high speeds ●When air is blowing out of the vents onto the microphone ●When the air conditioning fan emits a loud noise

■Operations that cannot be performed while driving

●Operating the system with

●Registering a portable player to the system

■Changing the passkey

→P. 377

371

3-3. Using the Bluetooth® audio system Operating a Bluetooth® enabled portable player

Power

Volume

Fast-forwarding and reversing

Selecting tracks

Selector knob

Playback

Playback/pause

Displaying text messages

Selecting an album

Press “∨” or “∧” on

Selecting tracks

Press “∧” or “∨” on

Playing and pausing tracks

Press

372

3-3. Using the Bluetooth® audio system

Fast-forwarding and reversing tracks

Press and hold “∧” or “∨” on

Switching the display

Press

is pressed, the display changes in the following

Each time order: Track title → Track title/Artist name → Track title/Album name → Track title/Elapsed time

Using the steering wheel audio switches

→P. 361

■Bluetooth® audio system functions

Depending on the portable player that is connected to the system, certain functions may not be available.

373

3-3. Using the Bluetooth® audio system Setting up a Bluetooth® enabled portable player

Registering a portable player in the Bluetooth® audio system allows the system to function. The following functions can be used for reg- istered portable players: ■ Functions and operation procedures

STEP 1

Press and hold

until “BT AUDIO” is displayed.

STEP 2

STEP 3

(SETUP).

Press Select one of the following functions using a voice com-

mand or

● Registering a portable player

“Pair Audio Players (Pair audio player)” ● Selecting a portable player to be used

“Select Audio Player”

● Changing the registered name of a portable player

“Change Name”

● Listing the registered portable players

“List Audio Players”

● Changing the passkey

“Set Passkey”

● Deleting a registered portable player

“Delete Audio Player”

374

3-3. Using the Bluetooth® audio system

Registering a portable player

Select “Pair Audio Players (Pair audio player)” using a voice com-

mand or

, and perform the procedure for registering a portable

player. (→P. 369)

Selecting a portable player to be used

STEP 1

Select “Select Audio Player” using a voice command or

STEP 2

Select the portable player to be used by either of the following methods, and select “Confirm” using a voice command or

a. Press the talk switch and say the name of the desired por-

table player.

b. Press the talk switch and say “List audio players”. When the name of the desired portable player is read aloud, press the talk switch.

375

3-3. Using the Bluetooth® audio system

STEP 3

Press the talk switch and say “From car” or “From audio”, and

select “Confirm” using a voice command or

Vehicles with smart key system: If “From car” is selected, the porta- ble player will be automatically connected whenever the “ENGINE START STOP” switch is in either ACCESSORY or IGNITION ON mode. Vehicles without smart key system: If “From car” is selected, the por- table player will be automatically connected whenever the engine switch is in either the “ACC” or “ON” position.

Changing the registered name of a portable player

STEP 1

Select “Change Name” using a voice command or

STEP 2

Select the name of the portable player to be changed by either of the following methods, and select “Confirm” using a

voice command or

a. Press the talk switch and say the name of desired portable

player.

b. Press the talk switch and say “List audio players”. When the name of the desired portable player is read aloud, press the talk switch.

STEP 3

Press the talk switch or select “Record Name” using

and say the new name.

STEP 4

Select “Confirm” using a voice command or

376

3-3. Using the Bluetooth® audio system

Listing the registered portable players

Select “List Audio Players” using a voice command or

. The list

of registered portable players will be read aloud. When listing is complete, the system returns to “BT Audio Setup”. Pressing the talk switch while the name of a portable player is being read aloud selects the portable player, and the following functions will become available: ● Selecting a portable player: “Select Audio Player” ● Changing a registered name: “Change Name” ● Deleting a portable player: “Delete Audio Player”

Changing the passkey

STEP 1

Select “Set Passkey” using a voice command or

STEP 2

Press the talk switch, say a 4 to 8-digit number, and select

“Confirm” using a voice command or

STEP 3

When the entire number to be registered as a passkey has

been input, press

again.

377

3-3. Using the Bluetooth® audio system

Deleting a registered portable player

STEP 1

Select “Delete Audio Player” using a voice command or

STEP 2

Select the portable player to be deleted by either of the follow- ing methods and select “Confirm” using a voice command or

a. Press the talk switch and say the name of the desired por-

table player.

b. Press the talk switch and say “List audio players”. When the name of the desired portable player is read aloud, press the talk switch.

If the portable player to be deleted is paired as a Bluetooth® phone, the registration of the mobile phone can be deleted at the same time. A voice guidance instruction to delete a mobile phone is heard.

STEP 3

Select “Confirm” using a voice command or

■The number of portable players that can be registered Up to 2 portable players can be registered in the system.

378

3-3. Using the Bluetooth® audio system Bluetooth® audio system setup

■ System setup items and operation procedures →P. 401

379

3-4. Using the hands-free phone system (for cellular phone) Hands-free phone system (for cellular phone) features∗

This system supports Bluetooth®, which allows you to make or receive calls without using cables to connect a cellular phone and the system, and without operating the cellular phone. Owners of models equipped with a navigation system should refer to the “Navigation System Owner's Manual”. ■ Hands-free system quick guide

STEP 1

STEP 2

STEP 3

Setting a cellular phone. (→P. 384) Adding an entry to the phonebook (Up to 20 names can be stored). (→P. 405) Dialing by inputting a name. (→P. 393)

380

∗: If equipped

3-4. Using the hands-free phone system (for cellular phone)

Title

Using the hands-free phone system ■ Operating the system using a voice

■ Using the hands-free phone system for

■ Menu list of the hands-free phone

command

the first time

system

Making a phone call ■ Dialing by inputting a number ■ Dialing by inputting a name ■ Speed dialing ■ When receiving a phone call ■ Transferring a call ■ Using the call history memory Setting a cellular phone ■ Registering a cellular phone ■ Selecting the cellular phone to be used ■ Changing a registered name ■ Listing the registered cellular phone ■ Deleting a cellular phone ■ Changing the passkey ■ Turning the hands-free phone

automatic connection on/off

Security and system setup ■ Setting or changing the PIN ■ Locking or unlocking the phone book ■ Setting voice guidance volume ■ Initialization Using the phone book ■ Adding a new phone number ■ Setting speed dials ■ Changing a registered name ■ Deleting registered data ■ Deleting speed dials ■ Listing the registered data

Page

P. 384

P. 392

P. 396

P. 401

P. 405

381

3-4. Using the hands-free phone system (for cellular phone)

■Conditions under which the system will not operate

●If using a cellular phone that does not support Bluetooth® ●If the cellular phone is switched off ●If you are outside service range ●If the cellular phone is not connected ●If the cellular phone's battery is low ●If the cellular phone is behind the seat or in the glove box or console box ●If metal is covering or touching the cellular phone

■When transferring ownership of the vehicle

Be sure to initialize the system to prevent personal data from being improp- erly accessed.

■Required profiles for the cellular phone

●HFP (Hands Free Profile) Ver. 1.0
●OPP (Object Push Profile) Ver. 1.1

■About Bluetooth®

Bluetooth is a registered trademark of Bluetooth SIG. Inc.

■Certification for the hands-free phone system

775E-K025

FCC ID: AJDK025
IC ID: MADE IN JAPAN This device complies with Part 15 of the FCC Rules and RSS-Gen of IC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired oper- ation.

382

3-4. Using the hands-free phone system (for cellular phone)

CAUTION

■FCC WARNING

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Radio Frequency Radiation Exposure. This equipment complies with FCC/ IC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply with- out maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated with at least 7.9 in. (20 cm) and more between the radiator and person’s body (excluding extremities: hands, wrists, feet and ankles). This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

■Caution while driving

Do not use a cellular phone, or connect the Bluetooth® phone.

NOTICE

■To prevent damage to a cellular phone

Do not leave a cellular phone in the vehicle. The temperature inside may become high resulting in damage to the phone.

383

3-4. Using the hands-free phone system (for cellular phone) Using the hands-free phone system (for cellular phone)

■ Audio unit

Display A message, name, phone number, etc. is displayed.

Lower-case characters and special characters, such as an umlaut, cannot be dis- played.

Selects speed dials Selects items such as menu or number Turn: Selects an item Press: Inputs the selected item Bluetooth® connection con- dition and reception level

If “BT” is not displayed, the hands-free phone system cannot be used.

384

3-4. Using the hands-free phone system (for cellular phone)

■ Steering wheel switches

■ Microphone

Volume The voice guidance volume cannot be adjusted using this button. On-hook switch Turns the hands-free sys- tem off/ends a call/refuses a call Off-hook switch Turns the hands-free sys- tem on/starts a call Talk switch Turns the voice command system on (press)/turns the voice command system off (press and hold)

CTH32AS047

CTH33AS001

385

3-4. Using the hands-free phone system (for cellular phone)

Operating the system using a voice command

By following voice guidance instructions output from the speaker, voice commands enable the operation of the hands-free phone sys-

tem without the need to check the display or operate

■ Operation procedure when using a voice command

Press the talk switch and follow voice guidance instructions.

■ Auxiliary commands when using a voice command

The following auxiliary commands can be used when operating the system using a voice command: “Cancel”: Exits the hands-free phone system “Repeat”: Repeats the previous voice guidance instruction “Go back”: Returns to the previous procedure “Help”: Reads aloud the function summary if a help comment is registered for the selected function

Using the hands-free phone system for the first time

Before using the hands-free phone system, it is necessary to register a cellular phone in the system. The phone registration mode will be entered automatically when starting the system with no cellular phone registered. Follow the procedure below to register a cellular phone:

STEP 1

Press the off-hook switch or the talk switch.

The introductory guidance and phone name registration instructions are heard.

386

3-4. Using the hands-free phone system (for cellular phone)

STEP 2

Select “Pair Phone” using a voice command or

STEP 3

Register a phone name by either of the following methods.

a. Select “Record Name” using

, and say a name to be

registered.

b. Press the talk switch and say a name to be registered.

A voice guidance instruction to confirm the input is heard.

STEP 4

Select “Confirm” using a voice command or

Registration to the hands-free phone system only

STEP 5

Select “Phone Only” using a voice command or

Registration to the hands-free phone system and Bluetooth® audio system at the same time

STEP 5

Select “Int. Audio (Internal audio)” using a voice command or

STEP 6

Select “Confirm” using a voice command or

A passkey is displayed and heard, and a voice guidance instruction for inputting the passkey into the cellular phone is heard.

STEP 7

Input the passkey into the cellular phone. Refer to the manual that comes with the cellular phone for the oper- ation of the phone.

Guidance for registration completion is heard.

387

3-4. Using the hands-free phone system (for cellular phone)

Menu list of the hands-free phone system

■ Normal operation

Second menu

Third menu

Operation detail

Dialing a number stored in the incoming call history memory Dialing a number stored in the outgoing call history memory

Dialing by inputting a number

Dialing by inputting a name registered in the phone book

Adding a new number Changing a name in the phone book Deleting the phone book data

Deleting a registered speed dial

Listing the phone book data

Registering a speed dial

Add Entry Change Name Delete Entry Delete Speed Dial List Names Speed Dial (Set speed dial)

First menu

CallBack (Call back)

Redial

Dial by Number Dial by Name (Dial by name)

Phonebook

388

3-4. Using the hands-free phone system (for cellular phone)

First menu