Download PDF Manual

ther scan the files in a folder on a specif- ic disc or scan the first file of all the folder. Scanning the files on a folder: Quickly push and release “SCAN”. “SCAN” will appear on the display and the player will scan all the files in the folder you are listening file, push the “SCAN” again. After all the tracks on the disc have been scanned in one pass, nor- mal play resumes. Scanning the first file of all the folders: “SCAN” until you hear a beep. Push ” will appear on the display and “ the player will scan the first file of the next folder. To select a folder, push the “SCAN” again. After all the folders have been scanned in one pass, normal play resumes.


XM satellite radio∗— You can either scan the currently selected channel category or scan only the preset channels for that band. To scan the preset channels: Push and hold the “SCAN” button until you hear a beep. “SCAN” appears on the display. The radio will tune in the next preset channel up the band, stay there for 5 seconds, and then move to the next preset channel. To stop scanning, push this button again. To scan category: Quickly push and release the “SCAN” but- ton. “SCAN” appears on the display. The radio will the same channel category up the band, stay there for 5 seconds, and then scan again. To stop scanning, push this button again. ∗: Use of satellite radio requires XM tuner and service. Contact your Toyota deal- er for details.


the currently selected channel


the next channel


find


in


226


’06 4Runner_U (L/O 0508)


up/


the seek mode,


(Seeking/Tracking


the radio finds and the next station up or down the


SEEK/TRACK down) Radio In plays station band. To seek the next station, quickly push and release “Ɯ” or “Ɲ” side of the “SEEK/ TRACK” button. Do this again to find the station after that. XM satellite radio∗— To select the next channel within the cur- rent channel category, push the “Ɯ” or “Ɲ” side of the “SEEK/TRACK” button. Repeat until a desired channel is found. ∗: Use of satellite radio requires XM tuner and service. Contact your Toyota deal- er for details.


Compact disc player Use this button to skip up or down to a different track. the “SEEK/ Push “Ɯ” or “Ɲ” side of TRACK” button until the number of the track you want to listen to appears on the display. If you want to return to the begin- ning of the current track, quickly push the down side of the button one time.


MP3/WMA player To file up or down to a different file: Push either side of the “TRACK” several times until the file you want to listen to appears on the display. If you want to return to the beginning of the current file, push the “Ɲ” side of the button one time, quickly. To fast forward or reverse the disc: If you want to fast forward or reverse the disc, push and hold it until you hear a beep. When you release the button, the player will resume playing. Vehicles with rear seat entertainment sys- tem— While the DVD player is in operation, the chapter or track can be changed by push- ing the “SEEK·TRACK” button. ST (Stereo reception) display Your radio automatically changes to stereo reception when a stereo broadcast is re- ceived. “ST” appears on the display. If the signal becomes weak, the radio reduces the amount of channel separation to prev- ent the weak signal from creating noise. If the signal becomes extremely weak, the radio switches from stereo to mono recep- tion.


side of


“Ɯ” or


“Ɲ”


the


TEXT Radio XM satellite radio∗1— When you push the “TEXT” button, the display changes as follows: CH NAME → TITLE (SONG/PROGRAM TITLE) → NAME (ARTIST NAME/FEA- TURE) → CH NUMBER → CH NAME Up to 10 alphanumeric characters can be displayed. (Some information will not be fully displayed.) The message display will be canceled if any button is pushed. If there is no song/program title or artist name/feature associated with the channel at that time, “− − − − −” will appear on the display. This XM tuner supports “Audio Services” (Music and Talk) of only XM satellite radio and “Text Information”∗2 linked to the re- spective audio services. ∗1: Use of satellite radio requires XM tuner and service. Contact your Toyota deal- er for details.


that affects


the display


∗2: Text


Information


includes, Channel Name, (Artist) Name, (Song) Title and Category Name.


227


’06 4Runner_U (L/O 0508)


file


the


in the order


“TEXT” button while


MP3/WMA player This button is used to change the display for the MP3/WMA file that contains text data. To change the display, quickly push and release the MP3/WMA is playing. The display changes the elapsed time to folder name to file name to album title to track title to artist name, then back to the elapsed time. If is pushed while an MP3/WMA file that does not contain text data is playing, “NO TITLE” will appear on the display. If the entire text data is not displayed, push and hold it until you hear a beep. The rest of the text data will appear.


this button


from


TUNE·FILE (Tuning and File up/down) Radio Turn the knob clockwise to step up the frequency. Turn the knob counterclockwise to step down the frequency. XM satellite radio∗— Turn the “TUNE·FILE” knob clockwise to step up the channel. Turn the knob coun- terclockwise to step down the channel. ∗: Use of satellite radio requires XM tuner and service. Contact your Toyota deal- er for details.


MP3/WMA player Turn the knob clockwise to file up. Turn the knob counterclockwise to file down. TYPE XM satellite radio∗— When you push the “Ɲ” or “Ɯ” side of the “TYPE” button while receiving a XM channel, the current channel category ap- pears on the display. When the channel category appears, push either “Ɲ” or “Ɯ” side of the “TYPE” but- ton to switch to the next or previous cate- gory. ∗: Use of satellite radio requires XM tuner and service. Contact your Toyota deal- er for details.


to


Compact disc player This button is used to change the display for the compact disc that contains text data. To change the display, quickly push and release the “TEXT” button while the com- pact disc is playing. The display changes in the order from the elapsed time to disc title the elapsed time. If this button is pushed while a compact disc that does not contain text data is playing, “NO TITLE” will appear on the display. If the entire disc or track title does not appear on the display, push and hold the button until you hear a beep. The rest of the title will appear.


then back


track


title,


to


228


’06 4Runner_U (L/O 0508)


Audio remote controls (steering switches)


Some parts of the audio system can be adjusted using the switches on the steer- ing wheel. Details of the specific switches, controls, and features are described below. 1. Volume control switches 2. “ƜƝ” switch 3. “MODE” switch


1. Volume control switches Push the “+” side to increase the volume. The volume continues to increase while the switch is being pushed. Push the “−” side to decrease the volume. The volume continues to decrease while the switch is being pushed. 2. “Ɯ Ɲ” switch Radio This switch has the following features— To select a preset station: Quickly push and release the “Ɯ” or “Ɲ” side of the switch. Do this again to select the next preset station. To seek a station: Push and hold the “Ɯ” or “Ɲ” side of the switch until you hear a beep. Do this again to find the next station. If you push the switch on either side during the seek mode, seeking will be cancelled. To step up or down the frequency, push and hold the switch even after you hear a beep. When you release the switch, the radio will begin seeking up or down for a station. Do the next station.


this again


to find


XM satellite radio∗— To select a preset channel, push the “Ɯ” or “Ɲ” side of the switch. Repeat until a desired channel is found. ∗: Use of satellite radio requires XM tuner and service. Contact your Toyota deal- er for details.


Compact disc player Use this switch to skip up or down to a different track in either direction. Quickly push and release the “Ɯ” or “Ɲ” side of the switch until the track you want to listen to is set. If you want to return to the beginning of the current track, push the “Ɲ” side of the switch once, quickly. With compact disc changer only— Push and hold the “Ɯ” or “Ɲ” side of the switch until the disc you want to listen to is set. MP3/WMA player Use this switch to select a desired file or disc. To select a desired file: Quickly push and release the “Ɯ” or “Ɲ” side of the switch until the file you want to listen to is set. If you want to return to the beginning of the current file, push the “Ɲ” side of the switch once, quickly.


229


’06 4Runner_U (L/O 0508)


AUX adapter


If you install an audio system other than a genuine audio system, you will not be able to use the AUX adapter.


inserting a mini plug into


An AUX adapter is installed in the rear console box. By the AUX adapter, you can listen to music from a portable audio device through the vehicle’s speaker system. To use the AUX adapter, switch to the AUX mode (external device mode) by pressing the “DISC·AUX” button. When the AUX adapter is in use, “AUX” will appear on the display. To adjust the volume, turn the “PWR·VOL” knob. When using a portable audio device con- nected to the power outlet or cigarette lighter, noise may occur during playback. If this happens, use the power source of the portable audio device.


To select a desired disc: Push and hold the “Ɯ” or “Ɲ” side of the switch until the disc you want to listen to is set. Vehicles with rear seat entertainment sys- tem— While the DVD player is in operation, the chapter or track can be changed by push- ing the “Ɯ” or “Ɲ” side of the switch. 3. “MODE” switch Push the “MODE” switch to select an au- dio mode. Each push changes the mode sequentially if the desired mode is ready to use. To turn the audio system on, push the “MODE” switch. To turn the audio system off, push and hold the “MODE” switch until the system turns off.


230


’06 4Runner_U (L/O 0508)


Rear seat entertainment system—


The rear seat entertainment system con- sists of the following components. 1. Front audio system 2. DVD player 3. Rear seat entertainment system display 4. Rear seat entertainment system


controller


5. A/V input adapter 6. Power outlet (115 VAC) 7. Power outlet main switch


231


’06 4Runner_U (L/O 0508)


—Display


You can purchase a wireless headphone at a Toyota dealer.


CAUTION


D Do not operate a motor vehicle while using headphones. Doing so may cause an accident, resulting in death or serious injury.


D With DVD player:


that


Conversational speech on some DVDs is recorded at a low volume to emphasize the impact of sound If you adjust the volume effects. assuming the conversations represent the maximum volume lev- el that the DVD will play, you may be startled by louder sound effects or when you change to a different audio source. Be sure to adjust the volume with this in mind. Make sure the volume creased, before you headphone.


is not turn on


in- the


To open the display, push the lock release button.


The rear seat entertainment system is de- signed for the rear passengers to enjoy audio and DVD video separately from the front audio system. The rear seat entertainment system can be operated when the ignition key is in the “ACC” or “ON” position. The rear passengers can enjoy DVD vid- eo, audio CD, video CD, CD text, dts−CD and MP3. The rear seat entertainment system can play DVD video, audio CD, video CD, CD text, dts−CD or MP3 only when a disc is loaded in the DVD player. You can enjoy videos and sound when your personal audio system is connected to the A/V input adapter. For details, refer to the manufacturer’s instructions. You can enjoy the rear seat entertainment system with a wireless headphone. The wireless headphone can be used within rear seat. If the signal becomes weak, the headphone will mute. For details, refer to the manufacturer’s instructions. With some wireless headphone generally available in the market, it may be difficult to catch sound properly. Toyota recom- mends the use of Toyota genuine wireless headphone.


232


’06 4Runner_U (L/O 0508)


NOTICE


z Benzene or alkaline solutions may damage the coated surface of the screen.


z To prevent the battery from being discharged, do not turn on the rear seat entertainment system longer than necessary when the engine is not running.


Pull the display down to an easily view- able angle (between 90_ and 125_)


NOTICE


The screen should be cleaned with a dry soft cloth. If the screen is pushed by hand or wiped with a hard cloth, the surface of the screen may be scratched.


To close, push the display up until you hear a click. The illumination of the screen is automati- cally is closed. However, the rear seat entertain- ment system is not turned off.


turned off when


the display


CAUTION


To reduce the chance of in case of an accident or sudden stop while driving, close the display when it is not in use.


injury


233


’06 4Runner_U (L/O 0508)


BEFORE USING THE CONTROLLER (for new vehicle owners) A battery is already set in the control- ler with an insulating sheet, which pre- from being dis- vents charged. Before using the controller, remove the insulating sheet according to the following procedure.


the battery


1. Remove the cover of the controller


as shown.


—Rear seat entertainment system controller The rear seat entertainment system can be operated with the rear seat entertain- ment system controller and buttons on the DVD player unit. The system cannot be operated by touching the switches on the screen directly.


CAUTION


Do not disassemble or modify the controller. It may cause an accident, fire or electric shock.


NOTICE


Keep the controller away from direct sunlight, high heat and high humidity. These conditions could cause the case to deform or the battery to ex- plode or leak.


234


2. Remove the insulating sheet.


’06 4Runner_U (L/O 0508)


USING THE CONTROLLER To use the rear seat entertainment sys- tem controller, direct the signal output portion of the controller to the signal reception portion of the rear seat enter- tainment system display. The controller does not operate properly when the signal reception portion of the display to direct sunlight. Block the display from direct sunlight.


is exposed


CAUTION


To reduce the chance of in case of an accident or a sudden stop while driving, stow the controller in the console box or front seat side table when it is not in use.


injury


235


’06 4Runner_U (L/O 0508)


NOTICE


Observe the followings, otherwise the controller may be damaged. z Do not drop or strongly knock the


controller against hard objects.


z Do not sit on or place heavy ob-


jects on the controller.


z Do not leave the controller exposed to high temperatures (such as on the long time.


instrument panel) for a


236


’06 4Runner_U (L/O 0508)


—Control buttons "Controller


1. “DVD” button


This button turns on the DVD mode.


2. “VIDEO” button


This button causes the display to use the video signal from an external video device.


3. “OFF” button


This button turns off the rear seat en- tertainment system.


4. Joystick


This joystick selects a control switch, mode switch on the menu for the disc.


the screen or


5. “ENT” button


This button inputs the selected switch or the selected menu for the disc.


6. “FOLDER


” button


This button selects a desired folder.


7. “FOLDER


” button


This button selects a desired folder.


8. “


” button This button when the DVD player is operated.


forwards a screen


fast


237


’06 4Runner_U (L/O 0508)


9. “


” button


16. “ANGLE” button


This button stops a screen when the DVD player is operated.


10. “SET UP” button


This button indicates the initial set up screen when the DVD player is oper- ated.


11. “MENU” button


This button indicates the menu screen for DVD video when the DVD player is operated.


12. “AUDIO” button


This button indicates the changing au- dio screen when is operated.


the DVD player


This button selects the angle of the screen when the DVD player is oper- ated.


17. “SEARCH” button


This button indicates the title search screen when the DVD player is oper- ated.


18. “TOP MENU” button


This button indicates the title selection screen for DVD video when the DVD player is operated.


19. “


” button


This button reverse a screen when the DVD player is operated.


13. “SUB TITLE” button


20. “" ” button


This button indicates the changing sub- title screen when the DVD player is operated.


14. “DISPLAY” button


This button adjusts tone, contrast and brightness of the screen.


the color,


15. “SIZE” button


This button changes the display mode when the DVD player is operated.


238


This button plays or pauses a screen when the DVD player is operated.


21. “TRACK/CHAPTER


” button


This button selects track/chapter.


22. “TRACK/CHAPTER


” button


This button selects track/chapter.


23. “OPTION” button


button


This control switches on the screen when the DVD player is operated.


indicates


the


REPLACING CONTROLLER BATTERY For replacement, use 3 AA batteries.


CAUTION


Special care should be taken to pre- vent small children from swallowing the removed transmitter battery or components.


NOTICE


z When replacing the battery, be care-


ful not to lose the components.


z Replace only with


the same or equivalent type of battery recom- mended by a Toyota dealer.


z Dispose of used batteries according


to local regulations.


’06 4Runner_U (L/O 0508)


Replace the battery according to the fol- lowing procedure: 1. Remove the cover of the controller as


shown.


2. Remove the discharged batteries and the new batteries as shown.


in


put Install the cover.


NOTICE


z Be sure that the positive side and negative side of the controller bat- tery should be faced correctly.


z Do not replace the battery with wet


hands. Water may cause rust.


z Do not touch or move any compo- nents inside of the controller, or it may interfere with proper operation. z Be careful not to bend the electrode


of the controller battery insertion.


z Close the battery case securely.


After replacing the battery, check that the controller operates properly. If the control- ler still does not operate properly, contact your Toyota dealer.


239


’06 4Runner_U (L/O 0508)


—Turning the rear seat entertainment system on and off


To turn off the system, push the “OFF” button. When the front audio system is turned off, the rear audio system and the DVD player will be turned off simultaneously.


The rear seat entertainment system can be switched ON and OFF by pushing the “Rr. DISP” switch on the front audio sys- tem.


load screen changes


the “DVD” button is pushed,


To turn on the system, push the “DVD” button or “VIDEO” button. When disc player operation screen. When the “VIDEO” button is pushed, the images and sounds from the personal au- dio machine are output. The “DVD” button is effective only when a disc is inserted.


the the DVD


to


240


’06 4Runner_U (L/O 0508)


—Front audio system operation The rear DVD player can be operated through the front audio system.


—Rear system lock (with navigation system) The audio system controls in the instru- ment panel allow the operation of the rear seat entertainment system by rear seat passengers to be disabled. Turning on the rear system lock prevents small children from using the remote con- troller or operation panel of the DVD play- er unit to operate the rear seat entertain- ment system during driving. Turn the “AUDIO CONTROL” knob repeatedly until “RSE” is displayed. Next, turn the “AUDIO CONTROL” knob until “ON” is displayed, and the “AUDIO CONTROL” knob.


the audio system on. Push


then push


the “INFO” button


Push screen to “Screen Setting”. Push turn on Setting” screen system lock”. Then push “OK”.


the “ON” switch on


to


to change


the


the “Screen “Rear


the


241


’06 4Runner_U (L/O 0508)


—DVD player The DVD player can play audio CDs/ MP3 CDs, DVD video discs, CD texts, dts−CDs and video CDs. For appropriate discs for this player, see “Audio/video system operating hints” on page 270 in this Section. The DVD player works when the ignition key is in the “ACC” or “ON” position. To turn on the DVD player, a disc must be loaded in the player. To turn off the player, eject the disc. Error messages If the player malfunctions, your audio sys- tem will display one of the three following error messages. the If screen: It indicates that the disc is dirty, damaged or it was inserted upside down. Clean the disc or insert it correctly. If “REGION CODE ERROR” appears on the screen: It indicates that the DVD re- gion code is not set properly. the If screen: There the player. Eject the disc. Set the disc again. If the malfunction still exists, take your vehicle to your Toyota dealer.


“DVD ERROR” appears on inside


“DISC CHECK” appears on


is a problem


INSERTING THE DISC Insert a disc into the slot with the label side up. “DISC” indicator light turns on while the disc is loaded. If the label faces down, the disc cannot be played. In this case, “DISC CHECK” and disc number appear on the screen.


is displayed


When the rear system lock is on and any button is pushed on the remote controller or the operation panel, the screen shown above for approximately 6
seconds. Even when the rear system lock is turned on during play mode, images and sounds continue without interruption. The condition of the rear system lock is maintained, even when the ignition switch is turned off.


the


242


’06 4Runner_U (L/O 0508)


8 cm (3 in.) compact disc singles Your compact disc player needs an adap- tor to play compact disc singles. Compact disc singles are about 8 cm (3 in.) in diameter−smaller than standard discs.


If a disc which is not playable is inserted, “DISC CHECK” will also appear on the screen. For appropriate discs for this play- er, see “Audio/video system operating hints” on page 270 in this Section. The player will play the track or chapter, and it will play from the beginning of the track or chapter again after it reaches the end.


NOTICE


Never try to disassemble or oil any part of the DVD player. Do not insert anything other than a disc into the slot.


EJECTING THE DISC


Push the “


” button.


243


’06 4Runner_U (L/O 0508)


TURNING THE OPERATION SWITCHES ON AND OFF To turn on the operation switches, push the “OPTION” button on the controller.


The player can also be operated with the switches on the screen. To operate the switches on the screen, select the switch by the joystick and push the “ENT” button. You cannot select the switches on the screen by touching them directly. When the switch is selected by the joys- tick, the outline of the switch changes to blue. Push the switch will be highlighted in green.


“ENT” button, and


the


—DVD player operation switches


The DVD player can be operated with the controller buttons directly. 1. “DVD” button 2. “SET UP” button 3. “MENU” button 4. “AUDIO” button 5. “SUB TITLE” button 6. “ANGLE” button 7. “SIZE” button 8. “SEARCH” button 9. “TOP MENU” button 10. “" ”, “


”, “AA” and “""” buttons


244


’06 4Runner_U (L/O 0508)


There are operation switches on the “Page 1” and “Page 2” screens. To change the screen, push the “Page 1” or “Page 2” switch on the screen.


Top page (DVD video operation switch)


Top page (video CD)


Second page switch)


(DVD


video operation


Second page (video CD)


245


’06 4Runner_U (L/O 0508)


To turn off the switches on the screen, push the “OPTION” button on the control- ler once again or push the “Hide Buttons” on the screen.


If “ you select a switch, it the switch cannot work.


” appears on the screen when indicates that


On the screen


246


Controller


’06 4Runner_U (L/O 0508)


—DVD player operation NOTE: The playback condition of some DVD video discs may be determined by the DVD video software producer. This DVD player plays discs as the software producer intended. Therefore, some functions may not work properly. Be sure to read the instruction manual for the DVD video disc separately provided. For detailed information about DVD video discs, see “—DVD video disc information” on page 266 this Section. Precautions for DVD video discs When recording on a DVD video, video CD or audio tracks may not record in some cases while the menu is displayed. As audio will not play in this case, verify that the video tracks are playing and then activate playback. The title/chapter number and playback time display may not appear while playing back certain DVD video discs.


in


CAUTION


Conversational speech on some DVDs is recorded at a low volume to em- phasize the impact of sound effects. If you adjust the volume assuming that the conversations represent the maximum volume level available for the DVD, you may be startled by louder sound effects or when you change to a different audio source. Loud sounds may have a significant impact on the human body or pose a driving hazard. Keep in mind when you adjust the volume.


this


247


’06 4Runner_U (L/O 0508)


TURNING THE MENU SCREEN FOR THE DISC ON OR OFF DVD video— To turn on the menu screen for the disc, push the “Top Menu” or the “Menu” switch on the screen. You can also turn on the menu screen by pushing the “MENU” or “TOP MENU” button on the controller. For the operation of the menu screen, see the separate manual for the DVD disc.


You can select the menu for the disc by the joystick and the “ENT” button on the controller.


248



”, “AA” AND


switch/button: This


OPERATING THE “" ”, “ “""” SWITCHES/BUTTONS “" ” switch/button: Push this switch/but- ton to pause the disc or to cancel the pause and return to normal playing. “ switch/button stops a screen when the DVD player is operated. “AA” and “""” switches/buttons: Push and hold the “AA” or “""” switch/button to fast forward or reverse. When you re- lease the switch/button, the DVD player will resume playing. DVD video only— Push the “""” switch/button while paus- ing, the DVD video plays the slow−motion video replay.


’06 4Runner_U (L/O 0508)


SKIPPING TO THE PREDETERMINED SCREEN To skip to the predetermined screen, push the “Return” switch. The DVD player starts playing from the beginning of the predeter- mined screen. For the predetermined screen, see the separate manual for the DVD disc.


further details of


249


’06 4Runner_U (L/O 0508)


SELECTING THE TITLE To display the searching title screen, push the “Search” switch on the screen. You can also display the screen by pushing the “SEARCH” button on the controller.


DVD video


the


the “ENT” button


title number by using


DVD video— the Select joystick and push to enter the number. The player starts play- ing disc for that title number. The selected title number will appear on the screen. Push the “Back” switch to return to the menu screen.


250


’06 4Runner_U (L/O 0508)


CHANGING THE SUBTITLE LANGUAGE Push the “Sub Title” switch on the screen, and then the changing subtitle language screen will appear. You can also display the screen by pushing the “SUB TITLE” button on the controller.


Each time you push the “Sub Title” switch, another language stored on the disc is selected. To turn off the subtitles, push the “Hide Buttons” switch. Push the “Back” switch to return to the previous screen. The selected subtitle language will appear on the screen.


251


’06 4Runner_U (L/O 0508)


(DVD


CHANGING AUDIO LANGUAGE video only) the “Audio” switch on the screen Push and language then screen will appear. You can also display the screen by pushing the “AUDIO” button on the controller.


the changing audio


DVD video


turn off


the audio


language screen,


Each time you push the “Audio” switch, another language stored on the disc is selected. To push the “Hide Buttons” switch. Push the “Back” switch to return to the previous screen. DVD video— The selected audio language will appear on the screen.


252


’06 4Runner_U (L/O 0508)


CHANGING ANGLE SCREEN Push the “Angle” switch on the screen, and then the changing angle screen will appear. You can also display the screen by pushing the “ANGLE” button on the controller.


The angle can be selected for discs that are multi−angle compatible when the “ ” mark appears on the screen. Each time you push the “Angle” switch, the angle changes. The angle number which you can select will appear on the screen. To turn off the screen, push the “Hide Buttons” switch. Push the “Back” switch to return to the previous screen.


253


’06 4Runner_U (L/O 0508)


CHANGING THE INITIAL SETTING Push the “Set Up” switch on the screen, and then the initial setting screen will ap- pear. You can also display the screen by pushing the “SET UP” button on the con- troller. You can change the initial setting. After the setting is done, the player plays from the beginning of the chapter or the track.


Setup Menu screen


“Enter” switch. The


There are initial setting switches on the “Setup Menu” screen. After you change the initial setting, push the initial setting switch will be turned off and return to the picture previously. When the “Default” switch is pushed, all menus are initialized.


254


’06 4Runner_U (L/O 0508)


To select an audio language, use the joys- tick to enter the appropriate 4−digit lan- guage code. For details of the language codes, see the language code list. If a code which is not on the list is en- tered and the “ENT” button is pushed, the “Incorrect Code” screen will appear. Enter the code of the language you want to hear again. To screen, push the “Back” switch.


“Select Audio Lang.”


return


the


to


the


the


the appropriate switch on


CHANGING THE SUBTITLE LANGUAGE “Select Subtitle Lang.” To display screen, push “Subtitle Language” switch on the “Setup Menu” screen. Select the language you want to read by pushing the screen. To return push the “Back” switch. If you cannot find the language you want to read, push the “Others” switch. The “Enter Subtitle Lang. Code” screen will appear.


the “Setup Menu” screen,


to


255


the


the appropriate switch on


CHANGING THE AUDIO LANGUAGE Push the “Audio Language” switch on the “Setup Menu” and “Select Audio Lang.” screen appears. Select the language you want to hear by pushing the screen. To return push the “Back” switch. If you cannot find the language you want to hear, push the “Others” switch. The “Enter Audio Lang. Code” screen will ap- pear.


the “Setup Menu” screen,


to


’06 4Runner_U (L/O 0508)


To enter the code of the language you want to read, use the joystick to enter the appropriate 4−digit language code. For de- tails about the language codes, see the language code list. Push the “ENT” button on the controller. If numbers which are not on the list are entered and the “ENT” button is pushed, the “Incorrect code” screen will appear. Enter the language code you want to read again. To return to the “Select Subtitle Lang.” screen, push the “Back” switch on the screen.


256


CHANGING THE DVD LANGUAGE To display the “Select DVD Lang.” screen, push the “DVD Language” switch on the “Setup Menu” screen. Select the language you want to read on the screen. To return push the “Back” switch. If you cannot find a language you want to read, push the “Others” switch. The “Enter DVD Lang. Code” screen will appear.


the “Setup Menu” screen,


to


To enter the code of the language you want to read, use the joystick to enter the appropriate 4−digit language code. For de- tails about the language codes, see the language code list. Push the “ENT” button on the controller. If numbers which are not on the list are entered and the “ENT” button is pushed, the “Incorrect code” screen will appear. Enter the language code you want to read again. To to screen, push screen.


the “Select DVD Lang.” the “Back” switch on the


return


’06 4Runner_U (L/O 0508)


TURNING THE ANGLE MARK ON OR OFF The angle mark can be turned on discs that are multi−angle compatible. Each switch on turns on or off alternately.


the “Angle Mark” the angle mark


time you push


the screen,


for


OF


LEVEL


VIEWER


SETTING RESTRICTIONS You can restrict the play back screen by setting the viewer restrictions. You can prevent the restriction with a password. Some discs do not supply a restriction. To set the level of viewer restriction, push the “Parental Lock” switch on the “Setup Menu” screen. The “Enter Personal Code” screen will appear.


Enter the password and push the “ENT” button. The “Select Restriction Level” screen will appear. You cannot change the setting without in- putting the password. When you forget or change the password, push the “A” side of the joystick ten times to initialize the password. To return push the “Back” switch.


the “Setup Menu” screen,


to


257


’06 4Runner_U (L/O 0508)


SETTING THE DISPLAY MODE Pushing the “SIZE” button on the control- ler causes the display modes to change sequentially as follows:


Normal


Wide1


Wide2


LANGUAGE CODE LIST


Code


1001


0514


0618


0405


0920


0519


2608


1412


1620


1922


1821


1115


0512


0101


0102


0106


0113


0118


0119


Language


Japanese


English


French


German


Italian


Spanish


Chinese


Dutch


Portuguese


Swedish


Russian


Korean


Greek


Afar


Abkhazian


Afrikaans


Amharic


Arabic


Assamese


Push a parental level (1—8). The smaller the level number, the stricter the age limit. Push the “Back” switch to return to the “Setup Menu” screen.


258


’06 4Runner_U (L/O 0508)


0125


0126


0201


0205


0207


0208


0209


0214


0215


0218


0301


0315


0319


0325


0401


0426


0515


0520


0521


0601


0609


Aymara


Azerbaijani


Bashkir


Byelorussian


Bulgarian


Bihari


Bislama


Bengali


Tibetan


Breton


Catalan


Corsican


Czech


Welsh


Danish


Bhutani


Esperanto


Estonian


Basque


Persian


Finnish


0610


0615


0625


0701


0704


0712


0714


0721


0801


0809


0818


0821


0825


0901


0905


0911


0914


0919


0923


1009


1023


Fiji


Faroese


Frisian


Irish


Scots−Gaelic


Galician


Guarani


Gujarati


Hausa


Hindi


Croatian


Hungarian


Armenian


Interlingua


Interlingue


Inupiak


Indonesian


Icelandic


Hebrew


Yiddish


Javanese


1101


1111


1112


1113


1114


1119


1121


1125


1201


1214


1215


1220


1222


1307


1309


1311


1312


1314


1315


1318


1319


Georgian


Kazakh


Greenlandic


Cambodian


Kannada


Kashmiri


Kurdish


Kirghiz


Latin


Lingala


Laothian


Lithuanian


Latvian


Malagasy


Maori


Macedonian


Malayalam


Mongolian


Moldavian


Marathi


Malay


259


’06 4Runner_U (L/O 0508)


2019


2020


2023


2111


2118


2126


2209


2215


2315


2408


2515


2621


Tsonga


Tatar


Twi


Ukrainian


Urdu


Uzbek


Vietnamese


Volapük


Wolof


Xhosa


Yoruba


Zulu


Maltese


Burmese


Nauru


Nepali


Norwegian


Occitan


(Afan) Oromo


Oriya


Punjabi


Polish


Pashto, Pushto


Quechua


Rhaeto−Romance


Kirundi


Romanian


Kinyarwanda


Sanskrit


Sindhi


Sangho


Serbo−Croatian


Sinhalese


1320


1325


1401


1405


1415


1503


1513


1518


1601


1612


1619


1721


1813


1814


1815


1823


1901


1904


1907


1908


1909


260


1911


1912


1913


1914


1915


1917


1918


1919


1920


1921


1923


2001


2005


2007


2008


2009


2011


2012


2014


2015


2018


Slovak


Slovenian


Samoan


Shona


Somali


Albanian


Serbian


Siswati


Sesotho


Sundanese


Swahili


Tamil


Telugu


Tajik


Thai


Tigrinya


Turkmen


Tagalog


Setswana


Tonga


Turkish


’06 4Runner_U (L/O 0508)


—DVD player operation (video CD/audio CD/CD text/MP3)


USING THE CONTROL SCREEN When playing a disc, push the “DVD” but- ton on the controller. The status screen will appear on the screen.


SELECTING THE DISC MENU NUMBER (video CD only) Push the “Select Number” switch and then the disc menu number search screen will appear. You can also display the screen by pushing the “SEARCH” button on the controller.


261


SELECTING THE CHAPTER/TRACK the To select or “CHAPTER/TRACK the “CHAPTER/TRACK controller the chapter/track you want to select appears on the screen.


the chapter/track, push button ” button on of


number


until


the



’06 4Runner_U (L/O 0508)


TURNING ON THE DISC MENU (video CD only) Push the “Return” switch to turn on the menu screen for the disc. For the operation of the menu screen, see the manual for the video CD.


“""” switches: Push


OPERATING THE “" ”, “AA” AND “""” SWITCHES (video CD only) “" ” switch: Push this switch to pause the disc or to cancel the pause and return to normal playing. “AA” and this switch to fast forward or reverse. If you want the current track, release the switch. Video CD only— Push the “""” switch/button while paus- ing, the DVD video plays the slow−motion video replay.


the beginning of


to return to


the disc


Enter the disc menu number by using the joystick and push the “ENT” button. The player starts playing the entered disc menu number. The entered disc menu number will appear on the screen. Push the “Back” switch to return to the menu screen.


from


262


’06 4Runner_U (L/O 0508)


CHANGING MENU PAGE OR TRACK (video CD only) Push the “Next Menu” or “Prev. Menu” switch while the disc menu is displayed. The next or previous page will appear on the screen. Push the “Next Menu” or “Prev. Menu” switch while the player is playing video. The next or previous track will be searched and played.


MULTIPLEX


CHANGING TRANSMISSION (video CD only) Push the “Main/Sub” switch to change a multiplex transmission. The mode changes from Main/Sub to Main to Sub and back to Main/Sub by pushing the “Main/Sub” switch.


CHANGING THE INITIAL SETTING (video CD only) Push the “Set Up” switch on the screen and then the initial setting screen will ap- pear. You can also display the screen by pushing the “SET UP” button on the con- troller. You can change the initial setting. (See “CHANGING THE INITIAL SETTING” on page 254 in this Section for details.) After the setting is done, the player plays from the beginning of the chapter or the track.


263


’06 4Runner_U (L/O 0508)


USING THE CONTROL SCREEN When playing a disc, push the “DVD” but- ton on the controller. The control screen will appear on the screen. CD text only— The disc title and track title will appear on the screen when pushing the “DVD” but- ton. Details of the specific switches, controls and features are described below. 1. “RPT” switch (audio CD and CD text) Push the “RPT” switch while the track is playing. When the track ends, it will automatically replay. To turn off the re- peat feature, push this switch again.


2. “RAND” switch (audio CD and CD text) Push the “RAND” switch. The player will play the tracks on the disc in ran- dom order. To turn off the random fea- ture, push this switch again.


3. “SCAN” switch (audio CD and CD text) Push the “SCAN” switch. The player will scan all the tracks on the disc. To stop scanning, push this switch again. When the player has scanned all the tracks on the disc, it will stop scan- ning.


CD Text


CD MP3


264


MP3 only— Folder and file names will appear on the screen when the “DVD” button is pushed. The details of the specific switches, con- trols, and features are described below. 1. “RPT” switch


When the “RPT” switch is pushed while a track is played, the track file will be is played repeatedly until pushed again. When is pushed for at least 0.8 seconds, all the files in a folder will be played repeat- edly. To turn off repeat play mode, push the switch again.


the switch the switch


2. “RAND” switch


in


files


in a current


the “RAND” switch


random order. When


is pushed, When folder will be the played the switch is pushed for at least 0.8 sec- onds, all the files in the disk will be played in random. To turn off random play mode, push the switch again.


’06 4Runner_U (L/O 0508)


—Screen adjustment You can adjust the color, contrast, tone and brightness of the screen. Push the “DISPLAY” button on the control- ler and the “Display” screen will appear. The screen may turn purple to deflect the sunlight. This is not a malfunction.


3. “SCAN” switch


the


files


in a current


When the “SCAN” switch is pushed, all the folder will be scanned. Only the first 10 seconds of each file are played sequentially until all files are scanned. When the switch is pushed for at least 0.8 sec- onds, the first 10 seconds of each ini- tial file of all the folders in the disk will be played sequentially until the entire initial files are scanned. To stop scan- ning, push the switch again.


4. “FLD


” switch


When the switch is pushed, the initial file of the next folder will be played.


5. “


FLD” switch


When the switch is pushed, the initial file of folder will be played.


the previous


6. “DETAIL” switch


the switch


When is pushed while a track is played, the detailed file infor- mation of the track will be displayed.


Operate the joystick up and down to se- lect Brightness, Contrast, Tone, or Color and left and right to make adjustments.


+ or “GREEN”


Strengthens the green color Strengthens the contrast


− or “RED”


Strengthens the red color

Loading...
x