2010 Pontiac Vibe Owner Manual M
Keys and Locks Doors Vehicle Security Exterior Mirrors Interior Mirrors Windows Roof
Keys, Doors and
Windows ............................ 1-1
.............. 1-2
............................ 1-6
.............. 1-7
............. 1-10
.............. 1-11
...................... 1-11
............................ 1-13
Seats and Restraints ......... 2-1
Head Restraints
.............. 2-2
Front Seats
.................... 2-3
Rear Seats
.................... 2-7
Safety Belts
................... 2-8
Airbag System .............. 2-23
Child Restraints
............. 2-37
Storage .............................. 3-1
.... 3-1
Storage Compartments Additional Storage
Features
..................... 3-2
Roof Rack System .......... 3-5
Instruments and
Controls ............................. 4-1
Instrument Panel
Overview
.................... 4-2
......................... 4-4
Controls Warning Lights, Gages,
and Indicators
Vehicle Personalization OnStar System
Exterior Lighting Interior Lighting Lighting Features
............. 4-8
... 4-21
............. 4-23
Lighting ............................. 5-1
.............. 5-1
............... 5-4
............ 5-5
Infotainment System ......... 6-1
.................... 6-1
............................ 6-4
................. 6-9
Climate Controls ............... 7-1
... 7-1
....................... 7-4
................... 7-4
Climate Control Systems Air Vents Maintenance
Introduction Radio Audio Players
Driving and Operating ....... 8-1
.......... 8-2
... 8-16
............. 8-23
Driving Information Starting and Operating Engine Exhaust Automatic
Transmission
............. 8-24
..... 8-29
.............. 8-31
......................... 8-32
.... 8-33
............... 8-36
............................ 8-38
........................ 8-43
Manual Transmission Drive Systems Brakes Ride Control Systems Cruise Control Fuel Towing Conversions and
Add-Ons
................... 8-50
Vehicle Care ...................... 9-1
General Information
......... 9-2
Vehicle Checks
............... 9-4
Headlamp Aiming
.......... 9-32
Bulb Replacement
......... 9-33
Electrical System ........... 9-37
Wheels and Tires Jump Starting Towing Appearance Care
.......... 9-43
............... 9-69
........................ 9-73
.......... 9-75
Service and
Maintenance ..................... 10-1
....... 10-1
General Information Scheduled
Maintenance
.............. 10-3
Recommended Fluids,
Lubricants, and Parts
Maintenance Records
...................... 10-15
... 10-18
Vehicle Identification Vehicle Data
Technical Data ................. 11-1
...... 11-1
................. 11-2
Customer Information ...... 12-1
..... 12-1
Customer Information Reporting Safety
Defects
................... 12-13
Vehicle Data Recording
and Privacy
............. 12-14
Index ................................... i-1
Introduction
GENERAL MOTORS, GM, the GM Emblem, PONTIAC, the PONTIAC Emblem and the name VIBE are registered trademarks of General Motors Corporation. This manual includes the latest information at the time it was printed. GM reserves the right to make changes after that time without further notice.
For vehicles first sold in Canada, substitute the name “General Motors of Canada Limited” for Pontiac Division wherever it appears in this manual. This manual describes features that may or may not be on your specific vehicle. Read this manual from beginning to end to learn about the vehicle’s features and controls. Pictures, symbols, and words work together to explain vehicle operation. Keep this manual in the vehicle for quick reference.
Introduction
iii
Canadian Vehicle
Owners
Canadian Owners
(Propriétaires Canadiens)
A French language copy of
this manual can be obtained from
your dealer/retailer or from:
On peut obtenir un exemplaire de
ce guide en français auprès du
concessionnaire ou à l’adresse
suivante:
Helm, Incorporated
P.O. Box 07130
Detroit, MI 48207
1-800-551-4123
Numéro de poste 6438 de langue
française
www.helminc.com
Litho in U.S.A. Part No. 20784572 A First Printing
©2008 General Motors Corporation. All Rights Reserved.
iv
Introduction
Using this Manual To quickly locate information about the vehicle use the Index in the back of the manual. It is an alphabetical list of what is in the manual and the page number where it can be found.
Danger, Warnings, and Cautions
A circle with a slash through it is a safety symbol which means “Do Not,” “Do not do this” or “Do not let this happen.” A box with the word CAUTION is used to tell about things that could hurt you or others if you were to ignore the warning.
{ CAUTION
These mean there is something that could hurt you or other people.
Cautions tell what the hazard is and what to do to avoid or reduce the hazard. Read these cautions. A notice tells about something that can damage the vehicle. Notice: These mean there is something that could damage your vehicle. Many times, this damage would not be covered by the vehicle’s warranty, and it could be costly. The notice tells what to do to help avoid the damage. There are also warning labels on the vehicle which use the same words, CAUTION or Notice.
Symbols The vehicle has components and labels that use symbols instead of text. Symbols are shown along with the text describing the operation or information relating to a specific component, control, message, gage, or indicator.
M : This symbol is shown when you need to see your owner manual for additional instructions or information.
* : This symbol is shown when you need to see a service manual for additional instructions or information.
Introduction
Vehicle Symbol Chart Here are some additional symbols that may be found on the vehicle and what they mean. For more information on the symbol, refer to the index.
9 : Airbag Readiness Light # : Air Conditioning ! : Antilock Brake System (ABS) g : Audio Steering Wheel Controls or OnStar® $ : Brake System Warning Light " : Charging System I : Cruise Control B : Engine Coolant Temperature O : Exterior Lamps # : Fog Lamps
. : Fuel Gage
+ : Fuses
i : Headlamp High/Low-Beam Changer
j : LATCH System Child Restraints * : Malfunction Indicator Lamp : : Oil Pressure
} : Power
/ : Remote Vehicle Start > : Safety Belt Reminders
7 : Tire Pressure Monitor
F : Traction Control
M : Windshield Washer Fluid
vi
Introduction
✍ NOTES
Keys, Doors and Windows
1-1
Keys, Doors and Windows
Keys and Locks
Keys ...................................1-2
Remote Keyless Entry
(RKE) System .....................1-3
Remote Keyless Entry
(RKE) System Operation .......1-3
Door Locks ..........................1-5
Power Door Locks .................1-6
Safety Locks ........................1-6
Doors
Liftgate ................................1-6
Vehicle Security
Vehicle Security ....................1-7
Anti-Theft Alarm System .........1-7
Immobilizer ...........................1-9
Immobilizer Operation ............1-9
Exterior Mirrors
Power Mirrors .....................1-10
Folding Mirrors ....................1-10
Interior Mirrors
Manual Rearview Mirror ........1-11
Windows
Windows ............................1-11
Power Windows ..................1-12
Sun Visors .........................1-12
Roof
Sunroof ..............................1-13
1-2
Keys, Doors and Windows
Keys and Locks Keys
{ CAUTION
Leaving children in a vehicle with the ignition key is dangerous for many reasons, children or others could be badly injured or even killed. They could operate the power windows or other controls or even make the vehicle move. The windows will function with the keys in the ignition and children could be seriously injured or killed if caught in the path of a closing window. Do not leave the keys in a vehicle with children.
Do not do any of the following to keys with a transponder: • Cover the key. • Hit the key hard against other
objects.
• Expose it to high temperatures
for a long time.
• Put the key in water. • Use the key with electromagnetic
materials.
Any new Immobilizer key must be
programmed before it will start
the vehicle. See your dealer/retailer.
In an emergency, contact Roadside
Assistance. See Roadside
Assistance Program on page 12-6
for more information.
Notice:
keys in the vehicle, you may have
to damage the vehicle to get in.
Be sure you have spare keys.
If you ever lock your
The key is used for the ignition, doors, and all other locks. The key number is on the tag attached to the key ring. Keep this tag and give it to your dealer/retailer if a new key needs to be made. If the vehicle has an Immobilizer theft deterrent system, the key has a transponder in the key that matches a decoder in the vehicle. See Immobilizer Operation on page 1-9 for additional information.
Remote Keyless Entry (RKE) System See Radio Frequency Statement (US, Can) on page 12-16 for information regarding Part 15 of the Federal Communications Commission (FCC) Rules and RSS-210/211 of Industry and Science Canada.
Remote Keyless Entry (RKE) System Operation The Remote Keyless Entry (RKE) transmitter functions work up to 30 feet (9 m) away from the vehicle.
Keys, Doors and Windows
1-3
HOLD p (Panic): Press to activate the alarm. The lights flash and the horn sounds. The alarm turns off when the ignition is turned to ON/RUN or HOLD p is pressed again. The ignition must be in LOCK/OFF or ACC/ACCESSORY for the alarm to work. Programming Transmitters to the Vehicle Only RKE transmitters programmed to this vehicle will work. If a transmitter is lost or stolen, a replacement can be purchased and programmed through your dealer/ retailer. When the replacement transmitter is programmed to this vehicle, all remaining transmitters must also be reprogrammed. Any lost or stolen transmitters will no longer work once the new transmitter is programmed. Each vehicle can have up to four transmitters programmed to it.
Q (Lock): Press to lock all the doors and liftgate. The hazard warning flashers flash once to confirm that the doors have locked. W (Unlock): Press once to unlock the driver door. If W is pressed again within three seconds, all remaining doors unlock. The hazard warning flashers flash twice to confirm that the door has unlocked.
1-4
Keys, Doors and Windows
Battery Replacement The battery in the transmitter is weak and should be changed if it does not work at the normal range in any location. Notice: When replacing the battery, do not touch any of the circuitry on the transmitter. Static from your body could damage the transmitter. To replace the battery, use a flat, thin non-metal object or tape-wrapped metal object. 1. Separate the transmitter.
2. Remove the module.
3. Open the module cover. 4. Remove the old battery.
5.
Insert the new battery, positive (+) side facing up. Replace with a CR2025 or equivalent battery.
6. Snap the module back together and replace it in the transmitter. 7. Snap the front and back of the
transmitter together.
Door Locks
{ CAUTION Unlocked doors can be dangerous.
• Passengers, especially
children, can easily open the doors and fall out of a moving vehicle. When a door is locked, the handle will not open it. The chance of being thrown out of the vehicle in a crash is increased if the doors are not locked. So, all passengers should wear safety belts properly and the doors should be locked whenever the vehicle is driven.
(Continued)
Keys, Doors and Windows
1-5
CAUTION (Continued)
• Young children who get into
unlocked vehicles may be unable to get out. A child can be overcome by extreme heat and can suffer permanent injuries or even death from heat stroke. Always lock the vehicle whenever leaving it. • Outsiders can easily enter through an unlocked door when you slow down or stop your vehicle. Locking your doors can help prevent this from happening.
To lock and unlock your vehicle from the outside, use your key or the Remote Keyless Entry transmitter, if equipped. See Remote Keyless Entry (RKE) System Operation on page 1-3 for more information.
Open the driver door, on vehicles with power door locks, by turning the key in the lock toward the rear of the vehicle. Turn the key back toward the center and toward the rear again, within three seconds, to unlock all of the doors. Use the key in the passenger door to also unlock all of the doors. Lock a door by turning the key toward the front of the vehicle. If you have power door locks, all the doors will lock. To manually lock or unlock the door from the inside, move the lever on the door forward or rearward. The driver and front passenger door open from the inside while locked. With manual locks, the key must be used to lock and unlock the liftgate.
1-6
Keys, Doors and Windows
Power Door Locks On vehicles with this feature, the power door lock switch is located on the armrest of the driver and front passenger door. Q : Press to lock all the doors. K : Press to unlock all the doors.
Safety Locks Rear door security locks prevent passengers from opening the rear doors from the inside.
Doors Liftgate
{ CAUTION
Exhaust gases can enter the vehicle if it is driven with the liftgate, trunk/hatch open, or with any objects that pass through the seal between the body and the trunk/hatch or liftgate. Engine exhaust contains Carbon Monoxide (CO) which cannot be seen or smelled. It can cause unconsciousness and even death. If the vehicle must be driven with the liftgate, or trunk/hatch open:
• Close all of the windows. • Fully open the air outlets on or
under the instrument panel.
(Continued)
Open the rear doors to access the security locks. To set these locks, slide the lever down on each door and close it. The doors can only be opened from outside with the door unlocked. To return the doors to normal operation, slide the lever up.
CAUTION (Continued)
• Adjust the Climate Control
system to a setting that brings in only outside air and set the fan speed to the highest setting. See Climate Control System in the Index. • If the vehicle is equipped with
a power liftgate, disable the power liftgate function. For more information about carbon monoxide, see Engine Exhaust on page 8-23.
Unlock and open the liftgate by inserting the key, turning it counterclockwise and raise it by hand.
Keys, Doors and Windows
1-7
Vehicle Security Vehicle theft is big business, especially in some cities. This vehicle has theft-deterrent features, however, they do not make it impossible to steal.
Anti-Theft Alarm System This vehicle may have a theft-deterrent system that activates an alarm if attempts are made to damage or break into the vehicle. The alarm sounds and the lights flash.
Close the liftgate by using the
handle to pull it down.
Lock the liftgate by inserting the
key and turning it clockwise to the
first position.
See Remote Keyless Entry (RKE)
System Operation on page 1-3
for more information.
1-8
Keys, Doors and Windows
The system is armed after 30 seconds and the security light will flash.
Unlocking the vehicle from the inside activates the system. To avoid setting off the alarm make sure all passengers are out of the vehicle and the windows are closed before arming the system.
Disarming the System To disarm the alarm do one of the following: • Unlock the doors with the key. • Unlock the doors and liftgate with
the RKE transmitter.
• Start the engine.
Testing the Alarm To test the alarm: 1. Open all the windows. 2. Set the system by closing and
locking the doors and liftgate with the RKE transmitter. Wait until the security light is flashing.
3. Unlock the driver door from
the inside. The system should activate the alarm.
4. Stop the alarm as described in
the disarming procedure.
5. Repeat this operation for the other doors. Check that the system is activated when the battery terminal is disconnected and then reconnected.
If the system does not work properly, have it checked by your dealer/retailer.
The security light is in the center of the instrument panel.
Arming the System To arm the system: 1. Close all the doors and the
liftgate.
2. Lock the doors and liftgate with
the key or Remote Keyless Entry (RKE) transmitter. The security light comes on solid.
Keys, Doors and Windows
1-9
How the System Alarm is Activated The system activates the alarm if: • A locked door or the liftgate
is unlocked or opened without the RKE transmitter.
• A locked door is unlocked or
opened without the key.
• The liftgate is unlocked or
opened with the key.
• The battery is reconnected. • The side windows are tapped or
broken.
Do not leave the key or device that disarms or deactivates the theft deterrent system in the vehicle.
Immobilizer See Radio Frequency Statement (US, Can) on page 12-16 for information regarding Part 15 of the Federal Communications Commission (FCC) Rules and RSS-210/211 of Industry and Science Canada.
Immobilizer Operation This vehicle has a passive theft-deterrent system. You do not have to manually arm or disarm the system. The system is automatically armed when the key is removed from the ignition.
The security light is in the center of the instrument panel. It comes on if there is a problem with arming or disarming the theft-deterrent system.
The security light flashes when the system is armed. Only the correct key starts the vehicle. If the engine does not start, there could be a problem with the theft-deterrent system. Turn the ignition off and try again. If the engine still does not start, and the key appears to be undamaged, try another ignition key. Check the fuse. See Fuses and Circuit Breakers on page 9-38. If the engine still does not start with the other key, the vehicle needs service. If the vehicle does start, the first key may be faulty. See your dealer/retailer who can service the theft-deterrent system and have a new key made.
1-10
Keys, Doors and Windows
If any of the following conditions occur, contact your dealer/retailer. • The security light stays on. • The security light does not start
flashing when the key is removed from the ignition. • The security light flashes
inconsistently.
See your dealer/retailer to have a new key with a transponder made. In an emergency, contact Roadside Assistance Program. See Roadside Assistance Program on page 12-6. Do not leave the key or device that disarms or deactivates the theft deterrent system in the vehicle.
2. Use the arrows on the control pad to adjust the direction of the mirror.
3. Move the selector switch back to the center. This locks the mirrors in place.
Folding Mirrors Manually fold the mirrors inward to prevent damage when going through an automatic car wash. To fold, push the mirror toward the vehicle. Push the mirror outward, to return to its original position.
Exterior Mirrors Power Mirrors
The controls are located to the left of the steering wheel on the instrument panel. The vehicle must be in ON/RUN or ACC/ACCESSORY to adjust the mirrors. 1. Adjust either mirror by pushing
the selector switch to the L (left) or R (right).
Keys, Doors and Windows
1-11
Windows
{ CAUTION
Leaving children, helpless adults, or pets in a vehicle with the windows closed is dangerous. They can be overcome by the extreme heat and suffer permanent injuries or even death from heat stroke. Never leave a child, a helpless adult, or a pet alone in a vehicle, especially with the windows closed in warm or hot weather.
Interior Mirrors Manual Rearview Mirror Adjust the inside rearview mirror to see clearly behind the vehicle. Hold the mirror in the center to move it up, down, and side to side. The day/night lever lets you adjust the mirror to avoid glare from headlamps behind your vehicle. Move the lever to the right for nighttime use and back to the center for daytime use. Vehicles with OnStar have three additional control buttons located at the bottom of the mirror. See your dealer/retailer for more information on the system and how to subscribe to OnStar. See OnStar® System on page 4-23 for more information on the services OnStar provides.
Manual Windows Turn the crank on the door to open and close a manual window.
1-12
Keys, Doors and Windows
Power Windows
{ CAUTION
Leaving children in a vehicle with the keys is dangerous for many reasons, children or others could be badly injured or even killed. They could operate the power windows or other controls or even make the vehicle move. The windows will function and they could be seriously injured or killed if caught in the path of a closing window. Do not leave keys in a vehicle with children. When there are children in the rear seat use the window lockout button to prevent unintentional operation of the windows.
On vehicles with this feature, the power windows only work when the ignition is turned to ON/RUN or in Retained Accessory Power (RAP). See Retained Accessory Power (RAP) on page 8-18. Switches on the driver door control the driver and passenger windows. Each passenger door has a switch to control that window. Press or pull the front of a switch to lower or raise a window.
AUTO (Express-Down): Press all the way down and release to lower the driver window automatically. Pull up at any time to stop the window from lowering.
o (Lock-Out): Press the lock-out button, located on the driver door, to disable the passenger power windows and again to enable them. Only the driver window can be operated when the lock-out feature is used.
Sun Visors Pull the visor toward you or move it to the side to help reduce glare. To use the mirror, slide the attached cover.
Keys, Doors and Windows
1-13
Roof Sunroof On vehicles with a sunroof, the controls are on the overhead console. The ignition must be in ON/RUN or Retained Accessory Power (RAP) for the sunroof to work. TILT: Slide the sunshade back. Press to tilt the sunroof. Press again to stop movement at any time. DOWN: Press to lower the sunroof.
SLIDE: Press to open the sunroof. It express opens and stops before the fully open position. Press again to fully open. Press the switch at any time to stop the sunroof from moving. If the sunshade is closed it opens with the sunroof. CLOSE: Press to express close the sunroof. Press again to stop movement at any time. The sunshade must be closed by hand.
Anti-Pinch Feature If there is an obstruction when the sunroof is closing, it stops and partly opens again. Remove the obstruction and press the button again to close the sunroof.
1-14
Keys, Doors and Windows
✍ NOTES
Seats and Restraints
2-1
Child Restraints
Older Children .....................2-37
Infants and Young
Children ............................2-38
Child Restraint Systems ........2-41
Where to Put the
Restraint ...........................2-43
Lower Anchors and Tethers
for Children (LATCH
System) ............................2-45
Replacing LATCH System
Parts After a Crash ............2-51
Securing Child Restraints
(Rear Seat Position) ...........2-51
Securing Child Restraints
(Right Front Seat Position) ....2-53
Seats and Restraints
Head Restraints
Head Restraints ....................2-2
Active Head Restraints ...........2-3
Front Seats
Seat Position ........................2-3
Seat Adjustment ....................2-4
Reclining Seatbacks ..............2-4
Folding Seatback ..................2-6
Rear Seats
Rear Seats ...........................2-7
Safety Belts
Safety Belts ..........................2-8
How to Wear Safety Belts
Properly ............................2-12
Lap-Shoulder Belt ................2-18
Safety Belt Use During
Pregnancy ........................2-20
Safety Belt Extender ............2-21
Safety System Check ...........2-21
Safety Belt Care ..................2-22
Replacing Safety Belt
System Parts After
a Crash ............................2-22
Airbag System
Airbag System ....................2-23
Where Are the Airbags? .......2-24
When Should an Airbag
Inflate? .............................2-26
What Makes an Airbag
Inflate? .............................2-27
How Does an Airbag
Restrain? ..........................2-28
What Will You See After
an Airbag Inflates? .............2-28
Passenger Sensing
System .............................2-29
Servicing the
Airbag-Equipped Vehicle .....2-34
Adding Equipment to the
Airbag-Equipped Vehicle .....2-35
Airbag System Check ...........2-36
Replacing Airbag System
Parts After a Crash ............2-36
2-2
Seats and Restraints
Head Restraints The front seats have adjustable head restraints. The rear seats have adjustable headrests in all seating positions.
{ CAUTION
With head restraints that are not installed and adjusted properly, there is a greater chance that occupants will suffer a neck/spinal injury in a crash. Do not drive until the head restraints for all occupants are installed and adjusted properly.
Adjust the head restraint so that the top of the restraint is at the same height as the top of the occupant’s head. This position reduces the chance of a neck injury in a crash. Pull the head restraint up to raise it.
To lower the head restraint, press the button, located on the top of the seatback, and push the restraint down. Push down on the head restraint after the button is released to make sure that it is locked in place.
The head restraints are not designed to be removed. Always raise the rear center head rest at least one position when there is a passenger seated there.
Active Head Restraints Active Head Restraint System The vehicle has an active head restraint system in the front seating positions. These automatically tilt forward to reduce the risk of neck injury if the vehicle is hit from behind.
Front Seats Seat Position
{ CAUTION You can lose control of the vehicle if you try to adjust a manual driver’s seat while the vehicle is moving. The sudden movement could startle and confuse you, or make you push a pedal when you do not want to. Adjust the driver’s seat only when the vehicle is not moving.
Seats and Restraints
2-3
To move a manual seat forward or rearward:
1. Lift the bar to unlock the seat. 2. Slide the seat to the desired position and release the bar.
Try to move the seat to be sure it is locked in place.
2-4
Seats and Restraints
Seat Adjustment
Reclining Seatbacks
{ CAUTION You can lose control of the vehicle if you try to adjust a manual driver’s seat while the vehicle is moving. The sudden movement could startle and confuse you, or make you push a pedal when you do not want to. Adjust the driver’s seat only when the vehicle is not moving.
The driver seat height adjuster is located on the outboard side of the seat. To raise or lower the seat, pull up or push down on the lever repeatedly until the seat is at the desired height.
{ CAUTION
If either seatback is not locked, it could move forward in a sudden stop or crash. That could cause injury to the person sitting there. Always push and pull on the seatbacks to be sure they are locked.
{ CAUTION
Sitting in a reclined position when the vehicle is in motion can be dangerous. Even when buckled up, the safety belts cannot do their job when reclined like this. The shoulder belt cannot do its job because it will not be against your body. Instead, it will be in front of you. In a crash, you could go into it, receiving neck or other injuries.
(Continued)
CAUTION (Continued)
The lap belt cannot do its job either. In a crash, the belt could go up over your abdomen. The belt forces would be there, not at your pelvic bones. This could cause serious internal injuries. For proper protection when the vehicle is in motion, have the seatback upright. Then sit well back in the seat and wear the safety belt properly.
On vehicles with manual reclining seatbacks the lever used to operate them is located on the outboard side of the seat.
Seats and Restraints
2-5
To recline the seatback: 1. Lift the recline lever. 2. Move the seatback to the desired position, then release the lever to lock the seatback in place.
3. Push and pull on the seatback to
make sure it is locked.
To return the seatback to an upright position: 1. Lift the lever fully, without
applying pressure to the seatback, and the seatback will return to the upright position.
2. Push and pull on the seatback to
make sure it is locked.
2-6
Seats and Restraints
Folding Seatback { CAUTION
If you fold the seatback forward to carry longer objects, such as skis, be sure any such cargo is not near an airbag. In a crash, an inflating airbag might force that object toward a person. This could cause severe injury or even death. Secure objects away from the area in which an airbag would inflate. For more information, see Where Are the Airbags? on page 2-24.
{ CAUTION
Things you put on this seatback can strike and injure people in a sudden stop or turn, or in a crash. Remove or secure all items before driving.
On vehicles with this feature, the seatback folds down to allow for more cargo space. When the area is not being used for more cargo space or as a temporary table, put the seatback in the locked, upright position. Only adjust the seat when the vehicle is not moving. To fold the seatback down: 1. Move the seat rearward. 2. Lower the head restraint to the lowest position and make sure the seatback is at the most upright position and locked.
3. Pull up on one of the levers
located on either side of the back of the passenger seatback.
4. Fold the seatback down.
To raise the seatback: 1. Pull up on one of the levers
located on either side of the back of the passenger’s seatback.
2. Pull the seatback up and push it back to lock it into place. Make sure the safety belt is not twisted or caught in the seatback.
3. Push and pull the top of the
seatback to be sure it is locked into position.
4. Use the reclining front seatback lever to adjust the seatback to a comfortable position.
Rear Seats You can fold either side of the seatback down. The rear right side seatback can also be used as a temporary table while the vehicle is stopped.
{ CAUTION
A rear seatback folded forward, or any other object contacting or pressing the front seatback may affect the proper functioning of the passenger sensing system. See Passenger Sensing System on page 2-29.
To fold either seatback down: 1. Move the front seat forward
and the seatback to the upright position.
2. Move the headrests all the
way down.
Seats and Restraints
2-7
3. Pull up on the lock release knob, located on the top outboard side of the seatback.
Notice: Folding a rear seat with the safety belts still fastened may cause damage to the seat or the safety belts. Always unbuckle the safety belts and return them to their normal stowed position before folding a rear seat. 4. Fold the seatback down.
{ CAUTION
If either seatback is not locked, it could move forward in a sudden stop or crash. That could cause injury to the person sitting there. Always push and pull on the seatbacks to be sure they are locked.
2-8
Seats and Restraints
To raise the seatback: 1. Pull the seatback up and
push it back to lock it into place. The safety belts should not be twisted or caught in the seatback.
{ CAUTION
A safety belt that is improperly routed, not properly attached, or twisted will not provide the protection needed in a crash. The person wearing the belt could be seriously injured. After raising the rear seatback, always check to be sure that the safety belts are properly routed and attached, and are not twisted.
2. Push and pull the top of the
seatback to check that it is locked into position.
Safety Belts This section of the manual describes how to use safety belts properly. It also describes some things not to do with safety belts.
{ CAUTION
Do not let anyone ride where a safety belt cannot be worn properly. In a crash, if you or your passenger(s) are not wearing safety belts, the injuries can be much worse. You can hit things inside the vehicle harder or be ejected from the vehicle. You and your passenger(s) can be seriously injured or killed. In the same crash, you might not be, if you are buckled up. Always fasten your safety belt, and check that your passenger(s) are restrained properly too.
{ CAUTION
It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. Do not allow people to ride in any area of your vehicle that is not equipped with seats and safety belts. Be sure everyone in your vehicle is in a seat and using a safety belt properly.
This vehicle has indicators as a reminder to buckle the safety belts. See Safety Belt Reminders on page 4-11 for additional information.
In most states and in all Canadian provinces, the law requires wearing safety belts. Here is why: You never know if you will be in a crash. If you do have a crash, you do not know if it will be a serious one. A few crashes are mild, and some crashes can be so serious that even buckled up, a person would not survive. But most crashes are in between. In many of them, people who buckle up can survive and sometimes walk away. Without safety belts they could have been badly hurt or killed. After more than 40 years of safety belts in vehicles, the facts are clear. In most crashes buckling up does matter... a lot!
Seats and Restraints
2-9
Why Safety Belts Work When you ride in or on anything, you go as fast as it goes.
Take the simplest vehicle. Suppose it is just a seat on wheels.
2-10
Seats and Restraints
Put someone on it.
Get it up to speed. Then stop the vehicle. The rider does not stop.
The person keeps going until stopped by something. In a real vehicle, it could be the windshield...
or the instrument panel...
or the safety belts! With safety belts, you slow down as the vehicle does. You get more time to stop. You stop over more distance, and your strongest bones take the forces. That is why safety belts make such good sense.
Seats and Restraints
2-11
Questions and Answers About Safety Belts Q: Will I be trapped in the vehicle after a crash if I am wearing a safety belt?
A: You could be — whether you are
wearing a safety belt or not. But your chance of being conscious during and after an accident, so you can unbuckle and get out, is much greater if you are belted. And you can unbuckle a safety belt, even if you are upside down. Q: If my vehicle has airbags, why
should I have to wear safety belts?
A: Airbags are supplemental
systems only; so they work with safety belts — not instead of them. Whether or not an airbag is provided, all occupants still have to buckle up to get the most protection. That is true not only in frontal collisions, but especially in side and other collisions.
2-12
Seats and Restraints
Q: If I am a good driver, and I never drive far from home, why should I wear safety belts?
A: You may be an excellent driver, but if you are in a crash — even one that is not your fault — you and your passenger(s) can be hurt. Being a good driver does not protect you from things beyond your control, such as bad drivers. Most accidents occur within 25 miles (40 km) of home. And the greatest number of serious injuries and deaths occur at speeds of less than 40 mph (65 km/h). Safety belts are for everyone.
How to Wear Safety Belts
Properly
This section is only for people of
adult size.
Be aware that there are special
things to know about safety belts
and children. And there are different
rules for smaller children and infants.
If a child will be riding in the vehicle,
see Older Children on page 2-37
or Infants and Young Children on
page 2-38. Follow those rules for
everyone’s protection.
It is very important for all occupants
to buckle up. Statistics show that
unbelted people are hurt more often
in crashes than those who are
wearing safety belts.
Occupants who are not buckled up
can be thrown out of the vehicle
in a crash. And they can strike
others in the vehicle who are
wearing safety belts.
First, before you or your passenger(s) wear a safety belt, there is important information you should know.
Sit up straight and always keep your feet on the floor in front of you. The lap part of the belt should be worn low and snug on the hips, just touching the thighs. In a crash, this applies force to the strong pelvic bones and you would be less likely to slide under the lap belt.
Q: What is wrong with this?
If you slid under it, the belt would apply force on your abdomen. This could cause serious or even fatal injuries. The shoulder belt should go over the shoulder and across the chest. These parts of the body are best able to take belt restraining forces. The shoulder belt locks if there is a sudden stop or crash.
Seats and Restraints
2-13
{ CAUTION
You can be seriously hurt if your shoulder belt is too loose. In a crash, you would move forward too much, which could increase injury. The shoulder belt should fit snugly against your body.
A: The shoulder belt is too loose.
It will not give as much protection this way.
2-14
Seats and Restraints
Q: What is wrong with this?
{ CAUTION
Q: What is wrong with this?
You can be seriously hurt if your lap belt is too loose. In a crash, you could slide under the lap belt and apply force on your abdomen. This could cause serious or even fatal injuries. The lap belt should be worn low and snug on the hips, just touching the thighs.
A: The lap belt is too loose. It will
not give nearly as much protection this way.
A: The belt is buckled in the wrong
buckle.
{ CAUTION
Q: What is wrong with this?
{ CAUTION
Seats and Restraints
2-15
You can be seriously injured if your belt is buckled in the wrong place like this. In a crash, the belt would go up over your abdomen. The belt forces would be there, not on the pelvic bones. This could cause serious internal injuries. Always buckle your belt into the buckle nearest you.
You can be seriously injured if your belt goes over an armrest like this. The belt would be much too high. In a crash, you can slide under the belt. The belt force would then be applied on the abdomen, not on the pelvic bones, and that could cause serious or fatal injuries. Be sure the belt goes under the armrests.
A: The belt is over an armrest.
2-16
Seats and Restraints
Q: What is wrong with this?
{ CAUTION
Q: What is wrong with this?
You can be seriously injured if you wear the shoulder belt under your arm. In a crash, your body would move too far forward, which would increase the chance of head and neck injury. Also, the belt would apply too much force to the ribs, which are not as strong as shoulder bones. You could also severely injure internal organs like your liver or spleen. The shoulder belt should go over the shoulder and across the chest.
A: The belt is behind the body.
A: The shoulder belt is worn under the arm. It should be worn over the shoulder at all times.
{ CAUTION
Q: What is wrong with this?
{ CAUTION
Seats and Restraints
2-17
You can be seriously injured by not wearing the lap-shoulder belt properly. In a crash, you would not be restrained by the shoulder belt. Your body could move too far forward increasing the chance of head and neck injury. You might also slide under the lap belt. The belt force would then be applied right on the abdomen. That could cause serious or fatal injuries. The shoulder belt should go over the shoulder and across the chest.
A: The belt is twisted across
the body.
You can be seriously injured by a twisted belt. In a crash, you would not have the full width of the belt to spread impact forces. If a belt is twisted, make it straight so it can work properly, or ask your dealer/retailer to fix it.
2-18
Seats and Restraints
Lap-Shoulder Belt All seating positions in the vehicle have a lap-shoulder belt. The following instructions explain how to wear a lap-shoulder belt properly. 1. Adjust the seat so you can sit up straight. To see how, see “Seats” in the Index.
The lap-shoulder belt may lock if you pull the belt across you very quickly. If this happens, let the belt go back slightly to unlock it. Then pull the belt across you more slowly. If the shoulder portion of a passenger belt is pulled out all the way, the child restraint locking feature may be engaged. If this happens, let the belt go back all the way and start again.
2. Pick up the latch plate and pull the belt across you. Do not let it get twisted.
3. Push the latch plate into the
buckle until it clicks.
If the latch plate will not go fully into the buckle, check if the correct buckle is being used.
The buckle for the center rear passenger position (A) has the word CENTER on it. Pull up on the latch plate to make sure it is secure. If the belt is not long enough, see Safety Belt Extender on page 2-21. Position the release button on the buckle so that the safety belt could be quickly unbuckled if necessary.
4. If equipped with a shoulder belt
height adjuster, move it to the height that is right for you. See “Shoulder Belt Height Adjustment” later in this section for instructions on use and important safety information.
5. To make the lap part tight, pull
up on the shoulder belt. It may be necessary to pull stitching on the safety belt through the latch plate to fully tighten the lap belt on smaller occupants.
To unlatch the belt, push the button on the buckle. The belt should return to its stowed position. Before a door is closed, be sure the safety belt is out of the way. If a door is slammed against a safety belt, damage can occur to both the safety belt and the vehicle.
Seats and Restraints
2-19
Shoulder Belt Height Adjuster The vehicle has a shoulder belt height adjuster for the driver and right front passenger seating positions. Adjust the height so that the shoulder portion of the belt is centered on the shoulder. The belt should be away from the face and neck, but not falling off of the shoulder. Improper shoulder belt height adjustment could reduce the effectiveness of the safety belt in a crash.
2-20
Seats and Restraints
Push down on the release button and move the height adjuster to the desired position. The adjuster can be moved up by pushing on the front of the height adjuster. After the adjuster is set to the desired position, try to move it down without pushing the button to make sure it has locked into position.
Safety Belt Pretensioners This vehicle has safety belt pretensioners for the front outboard occupants. Although the safety belt
pretensioners cannot be seen, they are part of the safety belt assembly. They can help tighten the safety belts during the early stages of a moderate to severe frontal and near frontal crash if the threshold conditions for pretensioner activation are met. And, if the vehicle has side impact airbags, safety belt pretensioners can help tighten the safety belts in a side crash. If the passenger sensing system detects that there is not a passenger in the right front passenger position, the safety belt pretensioner for that position will not activate. See Passenger Sensing System on page 2-29. Pretensioners work only once. If the pretensioners activate in a crash, they will need to be replaced, and probably other new parts for your safety belt system. See Replacing Safety Belt System Parts After a Crash on page 2-22.
Safety Belt Use During Pregnancy Safety belts work for everyone, including pregnant women. Like all occupants, they are more likely to be seriously injured if they do not wear safety belts.
A pregnant woman should wear a lap-shoulder belt, and the lap portion should be worn as low as possible, below the rounding, throughout the pregnancy.
The best way to protect the fetus is to protect the mother. When a safety belt is worn properly, it is more likely that the fetus will not be hurt in a crash. For pregnant women, as for anyone, the key to making safety belts effective is wearing them properly.
Safety Belt Extender If the vehicle’s safety belt will fasten around you, you should use it. But if a safety belt is not long enough, your dealer/retailer will order you an extender. When you go in to order it, take the heaviest coat you will wear, so the extender will be long enough for you. To help avoid personal injury, do not let someone else use it, and use it only for the seat it is made to fit. The extender has been designed for adults. Never use it for securing child seats. To wear it, just attach it to the regular safety belt. For more information, see the instruction sheet that comes with the extender.
When a safety belt extender is installed in the right front passenger safety belt, make sure the passenger airbag status indicator displays ON. See Passenger Airbag Status Indicator on page 4-13. If the indicator shows OFF, disconnect the extender’s latch from the buckle then reconnect the safety belt. The passenger airbag status indicator light should be ON and then the safety belt extender can be reconnected. If the safety belt extender is used while the passenger airbag status indicator light is OFF, the right front passenger frontal and seat-mounted side impact airbags (if equipped) may not activate correctly. Always disconnect the extender from the safety belt after you use it so that the airbag will work properly the next time someone uses that seat.
Seats and Restraints
2-21
Safety System Check Now and then, check that the safety belt reminder light, safety belts, buckles, latch plates, retractors and anchorages are working properly. Look for any other loose or damaged safety belt system parts that might keep a safety belt system from doing its job. See your dealer/retailer to have it repaired. Torn or frayed safety belts may not protect you in a crash. They can rip apart under impact forces. If a belt is torn or frayed, get a new one right away. Make sure the safety belt reminder light is working. See Safety Belt Reminders on page 4-11 for more information. Keep safety belts clean and dry. See Safety Belt Care on page 2-22.
2-22
Seats and Restraints
Safety Belt Care Keep belts clean and dry. { CAUTION
Do not bleach or dye safety belts. It may severely weaken them. In a crash, they might not be able to provide adequate protection. Clean safety belts only with mild soap and lukewarm water.
Replacing Safety Belt System Parts After a Crash
{ CAUTION A crash can damage the safety belt system in the vehicle. A damaged safety belt system may not properly protect the person using it, resulting in serious injury or even death in a crash. To help make sure the safety belt systems are working properly after a crash, have them inspected and any necessary replacements made as soon as possible.
After a minor crash, replacement of safety belts may not be necessary. But the safety belt assemblies that were used during any crash may have been stressed or damaged. See your dealer/retailer to have the safety belt assemblies inspected or replaced. New parts and repairs may be necessary even if the safety belt system was not being used at the time of the crash. Have the safety belt pretensioners checked if the vehicle has been in a crash, or if the airbag readiness light stays on after you start the vehicle or while you are driving. See Airbag Readiness Light on page 4-12.
Airbag System This vehicle has the following airbags: • A frontal airbag for the driver. • A frontal airbag for the right front
passenger.
The vehicle may have the following airbags: • A seat-mounted side impact
airbag for the driver.
• A seat-mounted side impact
airbag for the right front passenger.
• A roof-rail airbag for the driver
and the passenger seated directly behind the driver. • A roof-rail airbag for the
right front passenger and the passenger seated directly behind the right front passenger.
All of the airbags in the vehicle will have the word AIRBAG embossed in the trim or on an attached label near the deployment opening. For frontal airbags, the word AIRBAG will appear on the middle part of the steering wheel for the driver and on the instrument panel for the right front passenger. With seat-mounted side impact airbags, the word AIRBAG will appear on the side of the seatback closest to the door. With roof-rail airbags, the word AIRBAG will appear along the headliner or trim. Airbags are designed to supplement the protection provided by safety belts. Even though today’s airbags are also designed to help reduce the risk of injury from the force of an inflating bag, all airbags must inflate very quickly to do their job.
Seats and Restraints
2-23
Here are the most important things to know about the airbag system:
{ CAUTION
You can be severely injured or killed in a crash if you are not wearing your safety belt — even if you have airbags. Airbags are designed to work with safety belts, but do not replace them. Also, airbags are not designed to deploy in every crash. In some crashes safety belts are your only restraint. See When Should an Airbag Inflate? on page 2-26. Wearing your safety belt during a crash helps reduce your chance of hitting things inside the vehicle or being ejected from it. Airbags are “supplemental restraints” to the safety belts. Everyone in your vehicle should wear a safety belt properly — whether or not there is an airbag for that person.
2-24
Seats and Restraints
{ CAUTION
{ CAUTION
Airbags inflate with great force, faster than the blink of an eye. Anyone who is up against, or very close to, any airbag when it inflates can be seriously injured or killed. Do not sit unnecessarily close to the airbag, as you would be if you were sitting on the edge of your seat or leaning forward. Safety belts help keep you in position before and during a crash. Always wear your safety belt, even with airbags. The driver should sit as far back as possible while still maintaining control of the vehicle. Occupants should not lean on or sleep against the door or side windows in seating positions with seat-mounted side impact airbags and/or roof-rail airbags.
Children who are up against, or very close to, any airbag when it inflates can be seriously injured or killed. Airbags plus lap-shoulder belts offer protection for adults and older children, but not for young children and infants. Neither the vehicle’s safety belt system nor its airbag system is designed for them. Young children and infants need the protection that a child restraint system can provide. Always secure children properly in your vehicle. To read how, see Older Children on page 2-37 or Infants and Young Children on page 2-38.
There is an airbag readiness light on the instrument panel cluster, which shows the airbag symbol. The system checks the airbag electrical system for malfunctions. The light tells you if there is an electrical problem. See Airbag Readiness Light on page 4-12 for more information.
Where Are the Airbags?
The driver frontal airbag is in the middle of the steering wheel.
The right front passenger frontal airbag is in the instrument panel on the passenger’s side.
Driver Side shown,
Passenger Side similar
If the vehicle has seat-mounted side impact airbags for the driver and right front passenger, they are in the side of the seatbacks closest to the door.
Seats and Restraints
2-25
CAUTION (Continued)
Do not use seat accessories that block the inflation path of a seat-mounted side impact airbag. Never secure anything to the roof of a vehicle with roof-rail airbags by routing a rope or tie down through any door or window opening. If you do, the path of an inflating roof-rail airbag will be blocked.
If the vehicle has roof-rail airbags for the driver, right front passenger, and second row outboard passengers, they are in the ceiling above the side windows.
{ CAUTION If something is between an occupant and an airbag, the airbag might not inflate properly or it might force the object into that person causing severe injury or even death. The path of an inflating airbag must be kept clear. Do not put anything between an occupant and an airbag, and do not attach or put anything on the steering wheel hub or on or near any other airbag covering.
(Continued)
2-26
Seats and Restraints
When Should an Airbag Inflate? Frontal airbags are designed to inflate in moderate to severe frontal or near-frontal crashes to help reduce the potential for severe injuries mainly to the driver or right front passenger head and chest. However, they are only designed to inflate if the impact exceeds a predetermined deployment threshold. Deployment thresholds are used to predict how severe a crash is likely to be in time for the airbags to inflate and help restrain the occupants. Whether the frontal airbags will or should deploy is not based on how fast the vehicle is traveling. It depends largely on what you hit, the direction of the impact, and how quickly your vehicle slows down.
Frontal airbags may inflate at different crash speeds. For example: •
If the vehicle hits a stationary object, the airbags could inflate at a different crash speed than if the vehicle hits a moving object. If the vehicle hits an object that deforms, the airbags could inflate at a different crash speed than if the vehicle hits an object that does not deform. If the vehicle hits a narrow object (like a pole), the airbags could inflate at a different crash speed than if the vehicle hits a wide object (like a wall). If the vehicle goes into an object at an angle, the airbags could inflate at a different crash speed than if the vehicle goes straight into the object.
•
•
•
Thresholds can also vary with specific vehicle design.
Frontal airbags are not intended to inflate during vehicle rollovers, rear impacts, or in many side impacts. Frontal airbags for the driver and right front passenger may also deploy if a serious impact occurs to the underside of the vehicle such as hitting a curb, falling into a deep hole, or landing hard. In addition, the vehicle has dual-stage frontal airbags. Dual-stage airbags adjust the restraint according to crash severity. The vehicle has electronic frontal sensors, which help the sensing system distinguish between a moderate frontal impact and a more severe frontal impact. For moderate frontal impacts, dual-stage airbags inflate at a level less than full deployment. For more severe frontal impacts, full deployment occurs.
The vehicle has seat-mounted side impact and roof-rail airbags. See Airbag System on page 2-23. Seat-mounted side impact and roof-rail airbags are intended to inflate in moderate to severe side crashes. Seat-mounted side impact and roof-rail airbags will inflate if the crash severity is above the system’s designed threshold level. The vehicle has sensors which detect side impacts. These sensors signal the appropriate side impact airbag to inflate. The threshold level can vary with specific vehicle design. Seat-mounted side impact and roof-rail airbags are not intended to inflate in frontal impacts, near-frontal impacts, rollovers, or rear impacts. A seat-mounted side impact airbag
is intended to deploy on the side of the vehicle that is struck. A roof-rail airbag is intended to deploy on the side of the vehicle that is struck. It is possible that, in a crash involving the rear side of your vehicle, that only the roof-mounted airbag will deploy. In any particular crash, no one can say whether an airbag should have inflated simply because of the damage to a vehicle or because of what the repair costs were. For frontal airbags, inflation is determined by what the vehicle hits, the angle of the impact, and how quickly the vehicle slows down. For seat-mounted side impact and roof-rail airbags, deployment is determined by the location and severity of the side impact.
Seats and Restraints
2-27
What Makes an Airbag Inflate? In a deployment event, the sensing system sends an electrical signal triggering a release of gas from the inflator. Gas from the inflator fills the airbag causing the bag to break out of the cover and deploy. The inflator, the airbag, and related hardware are all part of the airbag module. Frontal airbag modules are located inside the steering wheel and instrument panel. For vehicles with seat-mounted side impact airbags, there are airbag modules in the side of the front seatbacks closest to the door. For vehicles with roof-rail airbags, there are airbag modules in the ceiling of the vehicle, near the side windows that have occupant seating positions.
2-28
Seats and Restraints
How Does an Airbag Restrain? In moderate to severe frontal or near frontal collisions, even belted occupants can contact the steering wheel or the instrument panel. In moderate to severe side collisions, even belted occupants can contact the inside of the vehicle. Airbags supplement the protection provided by safety belts. Frontal airbags distribute the force of the impact more evenly over the occupant’s upper body, stopping the occupant more gradually. Seat-mounted side impact and roof-rail airbags distribute the force of the impact more evenly over the occupant’s upper body. But airbags would not help in many types of collisions, primarily because the occupant’s motion is not toward those airbags. See When Should an Airbag Inflate? on page 2-26 for more information. Airbags should never be regarded as anything more than a supplement to safety belts.
What Will You See After an Airbag Inflates? After the frontal airbags and