CAUTION
. Do not use for anything other than
glasses.
2-46 Instruments and controls
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
Black plate (135,1)
. Do not leave glasses in the sun- glasses holder while parking in direct sunlight. The heat may da- mage the glasses.
GLOVE BOX
GUID-D5755917-EFBF-415E-AE59-B43411F701B6
SIC3590
WARNING
Keep glove box lid closed while driving to help prevent injury in an accident or a sudden stop.
To open the glove box, pull the handle *1 .
To close, push the lid in until the lock latches.
To lock *2 /unlock *3
the glove box, use the
mechanical key. For the mechanical key usage,
see “Keys” in the “3. Pre-driving checks and
adjustments” section.
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
Instruments and controls 2-47
Black plate (136,1)
SIC3654
SIC3591
Rear Rear (Hardtop models) To open, push the knob *1 and pull out *2 .
GUID-92205B1E-0645-4A20-A11C-FD29D6989A28
Front
GUID-5C4739C0-4DF5-44A9-B5FD-FBFAAABBD011
GUID-DD4ABB5A-EB54-4D5E-B3ED-627D92BFD082
CONSOLE BOX Front When the lever *A (driver’s seat side) is pulled, the upper case is available for storing some small items. When the lever *B (front passen- ger’s seat side) is pulled, the bottom case is available for storing some larger ones.
2-48 Instruments and controls
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
Black plate (137,1)
SIC3593
SIC3655
SIC3656
GUID-A2B41DF3-66C9-4356-B69B-5EF4B1E23F3B as
STORAGE BOX (if so equipped)
To open, push the storage box lid *1
illustrated.
The inner tray can be removed *2 as illustrated.
Do not place valuable items in the storage
box.
Do not use the storage box as an ashtray.
Type A
Type B
CARGO FLOOR BOX (Hardtop models)
GUID-22855E8F-5045-4BAA-A462-88723F2D13B2
Type A GUID-D8151D1B-506A-40B8-A864-5F630B4E8E0B 1. To open the cargo floor box, pull the strap
*A .
2. Remove the strap *B from the back side of the board and hang it on the lip of the lift gate.
GUID-4B77D327-C009-48B6-8B7B-1FC4BF4CC444
Type B To open the cargo floor box, push *A . To close, push the lid until the lock latches. The net partitions can be removed *B to make a larger storage space. The cargo floor box needs to be removed when you need a spare tire. (See “Flat tire” in the “6. In case of emergency” section.)
CAUTION
To avoid damage, do not load more than 22 lbs (10 kg) of cargo into the
Instruments and controls 2-49
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
Black plate (138,1)
cargo floor box.
SIC3594
LUGGAGE SIDE BOX (Hardtop mod-
els)
GUID-9D068CD2-3E85-4F54-A788-DBF041E5F1B2
To open the luggage side box, pull up the strap.
SIC3595
CARGO COVER (if so equipped for
Hardtop models)
GUID-3641C44E-8123-4F91-B5B7-07B068F6D402
The cargo cover keeps the contents in the cargo
area hidden from the outside.
To use the cargo cover, pull it out and hang both
sides on the hooks *1 .
2-50 Instruments and controls
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
Black plate (139,1)
restraint top tether strap is da- maged.
— If the cargo cover contacts the top tether strap when it is at- tached to the top tether anchor, remove the cargo cover from the vehicle or secure it on the cargo floor below its attachment loca- tion. If the cargo cover is not removed, it may damage the top tether strap during a collision.
— Do not allow cargo to contact the top tether strap when it is attached to the top tether an- chor. Properly secure the cargo so it does not contact the top tether strap. Cargo that is not properly secured or that con- tacts the top tether strap may damage the top tether strap during a collision.
To use the sub cover, hang the straps on the back of the headrest *2 . To stow the cargo cover, remove it from the hooks and hold until it is retracted. To remove the cargo cover, stow the cover and pull the left side of the holder to the opposite side *3 .
WARNING
. Never put anything on the cargo cover, no matter how small. Any object on it could cause an injury in an accident or sudden stop.
. Close the cargo cover when folding
the rear seat.
. Do not leave the cargo cover in the vehicle with it disengaged from the holder.
. Properly secure all cargo with ropes or straps to help prevent it from sliding or shifting. Do not place cargo higher than the seatbacks. In a sudden stop or collision, unse- cured cargo could cause personal injury.
. Your child could be seriously injured or killed in a collision if the child
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
LUGGAGE HOOKS (Hardtop models)
GUID-A76D431E-5514-466D-8503-9352D8CBD662
SIC3596
WARNING
. Always make sure that the cargo is properly secured. Use the suitable ropes and hooks.
Instruments and controls 2-51
Black plate (140,1)
WARNING
. Do not place anything over the luggage cover during soft top op- eration.
. Do not place or leave objects under the cover that may push the cover up.
. Do not place items on sides that
intrude into luggage cover area.
. Unsecured cargo can become dan- gerous in an accident or sudden stop.
CAUTION
Do not apply a total load of more than 22 lb (10 kg) *A or 7 lb (3 kg) *B to a single hook.
SIC4744
LUGGAGE COVER (CrossCabriolet
models)
GUID-6FCB585A-E72B-4BA2-A8FD-8ADDC214EFA2
A luggage cover is used to separate the trunk
and the top storage area.
To use the luggage cover, pull it out and hang
both sides on the hooks *1 .
To stow the luggage cover, remove it from the
hooks and hold it until it is retracted.
The luggage cover must be pulled out and hung
on hooks *1
for the soft top to oparate. (See
“Soft top (CrossCabriolet models)” in the “3.
Pre-driving checks and adjustments” section.)
2-52 Instruments and controls
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
Black plate (141,1)
CAUTION
Use care when placing or removing items from the roof rack. If you cannot comfortably lift the items onto the roof rack from the ground, use a ladder or stool.
information regarding GVWR and GAWR, see “Vehicle loading information” in the “9. Technical and consumer information” section.
WARNING
. Drive extra carefully when the vehi- cle is loaded at or near the cargo carrying capacity, especially if the significant portion of that load is carried on the roof rack.
. Heavy loading of the roof rack has the potential to affect the vehicle stability and handling during sud- den or unusual handling maneuvers. . Roof rack load should be evenly
distributed.
. Do not exceed maximum roof rack
load weight capacity.
. Properly secure all cargo with ropes or straps to help prevent it from sliding or shifting. In a sudden stop or collision, unsecured cargo could cause personal injury.
SIC3597
ROOF RACK (if so equipped for Hard-
top models)
GUID-75E038EF-E93A-4F7C-AC23-5CF5D424F222
Always distribute the luggage evenly on the roof
rack. Do not load more than 165 lb (75 kg)
(black) or 220 lb (100 kg) (silver) on the roof
rails. Observe the maximum load limit shown on
the crossbars or roof carriers when you attach
them on the roof rails. Contact a NISSAN dealer
for crossbar or other equipment information. Be
careful that your vehicle does not exceed the
Gross Vehicle Weight Rating (GVWR) or its
Gross Axle Weight Rating (GAWR front and
rear). The GVWR and GAWR are located on the
F.M.V.S.S. or C.V.M.S.S. certification label (lo-
cated on the driver’s door pillar). For more
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
Instruments and controls 2-53
Black plate (142,1)
WINDOWS
POWER WINDOWS
GUID-F440431D-2466-4C69-98F0-4066DC360F6E
GUID-B224B039-2B26-4B2E-990E-61770AE48A00
SIC3505
COAT HOOKS (Hardtop models)
GUID-81FB43A8-33F0-4D0C-8696-020589E0AB14
The coat hooks are equipped beside the rear
personal lights.
CAUTION
Do not place items which are more than 2 lb (1 kg) on the hook.
WARNING
. Make sure that all passengers have their hands, etc. inside the vehicle while it is in motion and before closing the windows. Use the win- dow lock switch to prevent unex- pected use of the power windows.
. Do not leave children unattended inside the vehicle. They could un- knowingly activate switches or con- trols and become trapped in the window. Unattended children could become involved in serious acci- dents.
If
the driver’s or
The power windows operate when the ignition
switch is in the ON position or for about 45
seconds after the ignition switch is pushed to
the OFF position.
front
passenger’s door is opened during this period
of about 45 seconds, power to the windows is
canceled.
The power window switches will be deactivated
during soft top operation (CrossCabriolet mod-
els).
SIC3283A
Driver side window Front passenger side window Rear left passenger side window Rear right passenger side window
1. 2. 3. 4. 5. Window lock button Main power window switch (driver’s side) To open or close the window, push down *A or pull up *B the switch and hold it. The main switch (driver side switches) will open or close all the windows.
GUID-26DFB0BE-6989-43F9-8167-0F6C3694B624
2-54 Instruments and controls
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
Black plate (143,1)
GUID-16F0A2BC-0A92-4EBF-AEF9-3903882D9E1D
Locking passengers’ windows When the lock button *C is pushed in, only the driver side window can be opened or closed. Push it in again to cancel.
SIC3336
SIC3285
Passenger side power window switch GUID-4D77BC1E-53A2-4A38-9A39-222E83528CCC The passenger side switch will open or close only the corresponding window. To open or close the window, push down or pull up the switch and hold it.
Hardtop models
SIC4743
CrossCabriolet models
Instruments and controls 2-55
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
Black plate (144,1)
Auto reverse function
GUID-19580295-1D80-4877-93A6-203373FD0AB2
WARNING
There are some small distances imme- diately before the closed position which cannot be detected. Make sure that all passengers have their hands, etc., in- side the vehicle before closing the window.
If the control unit detects something caught in the window as it is closing, the window will be immediately lowered. The auto reverse function can be activated when the window is closed by automatic operation when the ignition switch is in the ON position or for 45 seconds after the ignition switch is pushed to the OFF position. Depending on the environment or driving conditions, the auto reverse function may be activated if an impact or load similar to something being caught in the window occurs.
Automatic window lowering (CrossCab-
riolet models)
GUID-68431D2A-45C1-4082-9602-DC8E37328739
When the soft top operating switch is pressed,
the power windows will automatically be low-
ered completely. The windows do not
rise
automatically after
top open/close
operation is completed. Use the power window
switches to raise them.
the soft
Automatic adjusting function (Cross- Cabriolet models)
GUID-2A57D8B8-D2B5-4017-A2B4-5D5758878B3A
CAUTION
When the battery cable is removed from the battery terminal, do not close either of the front doors. The automatic win- dow adjusting function will not work and the side roof panel may be da- maged.
The power window has an automatic adjusting function. When the door is being opened, the window is automatically lowered slightly to avoid contact between the window and the top side rail. When the door is closed, the window is automatically raised slightly. While the automatic adjusting function does not work, the window will be controlled as follows:
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
mark on its surface.
Automatic operation
GUID-3B0158AA-9687-4021-B3A8-12225F5D2198
The automatic function is available for the switch
that has an
To fully open or close the window, completely
push down or pull up the switch and release it; it
need not be held. The window will automatically
open or close all the way. To stop the window,
just push or
the switch in the opposite
direction.
A light push or pull on the switch will cause the
window to open or close until the switch is
released.
The rear window automatic operation is for the
opening function only (CrossCabriolet models).
lift
Simultaneous operation of all four win- dows (CrossCabriolet models)
GUID-F3222C8C-2BD6-4165-85A5-6DEB6C706AF6
WARNING
Make sure that all passengers have their hands, etc. inside the vehicle before closing the windows.
When the driver’s and passenger’s door window switches (driver’s side) are pushed down or pulled up simultaneously, all four windows are opened or closed.
2-56 Instruments and controls
Black plate (145,1)
AUTOMATIC MOONROOF AND SUN-
SHADES
GUID-3349AE79-1AF5-473F-9AB7-69A7957FBC85
The moonroof and sunshades only operates
when the ignition switch is in the ON position.
The automatic moonroof and sunshades are
operational for about 45 seconds, even if the
ignition switch is pushed to the OFF position. If
the driver’s door or the passenger’s door is
opened during this period of about 45 seconds,
power
to the moonroof and sunshades is
canceled.
MOONROOF (if so equipped for Hardtop models)
GUID-B46D76D1-C71E-43ED-8E5B-5188E0D125CB
WARNING
In an accident you could be thrown from the vehicle through an open moonroof. Always use seat belts and child restraints.
. Do not allow anyone to stand up or extend any portion of their body out of the moonroof opening while the vehicle is in motion or while the moonroof is closing.
CAUTION
. Remove water drops, snow, ice or sand from the moonroof before opening.
. Do not place any heavy object on the moonroof or surrounding area. . Do not push or pull on the sun- shade. Doing so can damage the sunshade.
. When the door
is opened,
the window
lowers for approximately 0.39 in (10 mm).
. While the door is open, the window cannot
be raised.
If the windows do not close automatically GUID-4DA9302E-1FB0-4884-925F-1A056E33BC0E If the power window automatic function (closing only) does not operate properly, perform the following procedure to initialize the power window system. 1. Push the ignition switch to the ON position. 2. Close the door and soft top (CrossCabriolet
models).
3. Open the window completely by operating
the power window switch.
4. Pull the power window switch and hold it to close the window, and then hold the switch more than 3 seconds after the window is closed completely.
5. Release the power window switch. Operate the window by the automatic function to confirm the initialization is complete.
6. Perform steps 2 through 5 above for other
windows.
If the power window automatic function does not operate properly after performing the pro- cedure above, have your vehicle checked by a NISSAN dealer.
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
Instruments and controls 2-57
Black plate (146,1)
operation, push the moonroof switch to either of
the OPEN *1 , CLOSE *2 or UP *5 position.
Tilting moonroof
GUID-5BCB6B6D-1017-4E94-B105-E837913634C6
To tilt up the moonroof, push the moonroof
switch to the UP position *5 .
To tilt down the moonroof, push the switch to the
UP position *5
or push the switch to the
CLOSE position *2 .
When the moonroof
is tilted up, push the
moonroof switch to the second detent to the
CLOSE position *4 . The moonroof will tilt down
and the sunshades will close.
Auto reverse function
GUID-07736A6E-057D-4405-B60A-86505A7F3C58
WARNING
There are some small distances imme- diately before the closed position which cannot be detected. Make sure that all passengers have their hands, etc., in- side the vehicle before closing the moonroof.
If the control unit detects something caught in the moonroof and sunshades when they are closing, the moonroof will be immediately opened.
The auto reverse function can be activated when the moonroof and sunshades are closed by automatic operation when the ignition switch is in the ON position or for about 45 seconds after the ignition switch is pushed to the OFF position. If the moonroof and sunshades cannot be closed automatically when the auto reverse function activates due to a malfunction, push and hold the switch to the CLOSE position *2 . Depending on the environment or driving conditions, the auto reverse function may be activated if an impact or load similar to something being caught in the moonroof occurs.
If the moonroof does not operate
GUID-55D929EA-1A05-47B0-9DBB-75466D80DB38
If
the moonroof does not operate properly,
perform the following procedure to initialize the
moonroof operation system.
1.
If the moonroof is open, close it fully by pushing the switch to the CLOSE position *2 .
2. Push and hold the switch to the CLOSE
position *2 .
3. Release the moonroof switch after
the moonroof or sunshade moves slightly to the closed position.
SIC3801
Sliding sunshade and moonroof
GUID-35ECC1C1-78E5-4B3C-860F-E718E2CD552D
When the moonroof switch is pushed to the
OPEN position *1 ,
the front and rear sun-
shades will
fully open. When the switch is
pushed again, the moonroof will fully open.
When the moonroof switch is pushed to the
CLOSE position *2 , the moonroof will auto-
matically close. Push the switch again, and the
front and rear sunshades will close.
When the moonroof switch is pushed to the
second detent to the OPEN *3 or CLOSE *4
position, both the sunshade and moonroof will
open or close.
To stop the sunshades or moonroof during the
2-58 Instruments and controls
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
4. Push and hold the switch to the CLOSE
position *2
for 10 seconds.
5. The moonroof and sunshades will fully open
and then close.
6. Check if normally.
the moonroof switch operates
If the moonroof does not operate properly after performing the procedure above, have your vehicle checked by a NISSAN dealer.
Black plate (147,1)
INTERIOR LIGHTS
GUID-396974CF-8D5C-4223-9393-BF5087FE27B2
SIC4238
SIC3250
MAP LIGHTS GUID-EACC0B68-0B00-4B4C-B7BA-2C1E9F1879FC Push the button as illustrated to turn the light on or off.
PERSONAL LIGHTS (Hardtop models)
GUID-649CAF7C-2CCF-4E76-A1BD-9F34B3E94A95
Rear GUID-0958BB58-F974-4165-8A79-D4E6DD15AACD Push the button as illustrated to turn the light on or off.
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
Instruments and controls 2-59
Black plate (148,1)
any door is opened with the ignition switch in any position — remain on while the door
is opened. When the door is closed, the lights go off.
GUID-2E9E6196-2FCF-4993-83DD-8C4EF8E70D73
OFF position When the switch is in the OFF position *3 , the lights will not the condition.
regardless of
illuminate,
CAUTION
Do not use for extended periods of time with the engine stopped. This could result in a discharged battery.
— remain on for about 15 seconds. doors are unlocked by pushing the UN- LOCK button on the Intelligent Key or door handle request switch with the ignition switch in the LOCK position — remain on for about 15 seconds. any door is opened and then closed with the ignition switch in the LOCK position — remain on for about 15 seconds. any door is opened with the ignition switch in the ACC or ON position — remain on while the door
is opened. When the door is closed, the lights go off.
The lights will also turn off after 15
minutes when the lights remain illumi-
nated after the ignition switch has been
pushed to the OFF or LOCK position to
prevent the battery from becoming dis-
charged.
Models with color display:
When the auto interior illumination is set to the
OFF position (see “Vehicle information and
settings” in the “4. Monitor, heater, air condi-
tioner, audio, phone and voice recognition
systems” section), the lights will illuminate under
the following condition:
SIC4239
INTERIOR LIGHT CONTROL SWITCH
GUID-2A6055BA-7B37-4FE4-B397-77EF5A05A796
The interior
light control switch has three
positions: ON, DOOR and OFF.
ON position
When the switch is in the ON position *1
map lights and rear personal
nate.
GUID-7462AA90-5FAE-4F84-925A-24F0133E09B3
the
illumi-
lights will
GUID-2534F567-EC7E-4D89-9E58-CCFFC0DDC2B3
DOOR position When the switch is in the DOOR position *2 , the map lights and rear personal lights will illuminate under the following conditions:
ignition switch is switched to the LOCK position
2-60 Instruments and controls
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
Black plate (149,1)
MOOD LIGHTS (Hardtop models)
VANITY MIRROR LIGHTS
CARGO LIGHTS (Hardtop models)
GUID-010F00F5-89B1-468A-B28C-562B74BD8B74
GUID-6E431C2A-BCAB-4ED8-9FA7-03F14AE124F0
GUID-AC16BAD8-F320-4304-996B-A0D05319728A
SIC3599
SIC2064
Map lights
or
position.
next to the map lights under the instrument panel under the driver’s power window switch
The mood lights *A located in the following positions will illuminate whenever the headlight switch is in the The brightness of adjusted with the illumination control buttons. See “Instrument brightness control” earlier in this section.
the mood lights can be
The light on the vanity mirror will turn on when the cover on the vanity mirror is opened. When the cover is closed, the light will turn off. The lights will turn off after 15 minutes when the lights remain illuminated to prevent the battery from becoming dis- charged.
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
SIC2131A When the switch is in the ON position *1 , the light illuminates while the lift gate is opened. When the lift gate is closed, the light will turn off. When the switch is in the OFF position *2 , the light will turn off. The lights will turn off after 15 minutes when the light remain illuminated to pre- vent the battery from becoming dis- charged.
Instruments and controls 2-61
Black plate (150,1)
reverse features as required by federal safety standards. (These standards became effective for opener models manufactured after April 1, 1982.) A garage door opener which cannot detect an object in the path of a closing garage door and then automatically stop and reverse, does not meet current federal safety standards. Using a garage door opener without these features in- creases the risk of serious injury or death.
. During programming procedure, your garage door or security gate may open or close. Make sure that people and objects are clear of the garage door, gate, etc. that you are programming.
. Your vehicle’s engine should be turned off while programming HomeLink® Universal Transceiver.
TRUNK LIGHT (CrossCabriolet models)
HomeLink® UNIVERSAL TRANSCEIVER (if so equipped)
GUID-F7665349-183E-4013-AA39-F31226267085
The light
illuminates when the trunk lid is
opened. When the trunk lid is closed, the light
will turn off.
The light will also turn off after 15 minutes
when the light remains illuminated after
the ignition switch has been pushed to the
OFF or LOCK position to prevent the
battery from becoming discharged.
GUID-55E56F2F-00B7-4A2E-969B-A4422F852328
HomeLink® Universal Transceiver provides a
convenient way to consolidate the functions of
up to three individual hand-held transmitters into
one built-in device.
HomeLink® Universal Transceiver:
. Will operate most Radio Frequency (RF)
devices such as garage doors, gates, home
and office lighting, entry door locks and
security systems.
Is powered by your vehicle’s battery. No
separate batteries are required.
the
vehicle’s battery is discharged or is dis-
connected, HomeLink® will retain all pro-
gramming.
If
Once HomeLink® Universal Transceiver is programmed, retain the original transmit- ter for future programming procedures (Example: new vehicle purchases). Upon sale of the programmed HomeLink® Universal Transceiver buttons should be erased for security purposes. For additional information, see “Program- ming HomeLink®” later in this section.
the vehicle,
WARNING
. Do not use HomeLink® Universal Transceiver with any garage door opener that lacks safety stop and
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
2-62 Instruments and controls
Black plate (151,1)
PROGRAMMING HomeLink®
GUID-D8C5E61E-41B3-4673-B29E-956822CDD882
To program your HomeLink® Transceiver
to
operate a garage door, gate, or entry door
opener, home or office lighting, you need to be
at
the same location as the device. Note:
Garage door openers (manufactured after
1996) have “rolling code protection”. To pro-
gram a garage door opener equipped with
“rolling code protection”; you will need to use
a ladder to get up to the garage door opener
motor to be able to access the “smart or learn”
program button.
SIC3612
SIC3613
1. To begin, push and hold the 2 outer
HomeLink® buttons (to clear the memory)
until the indicator light *A blinks (after 20
seconds). Release both buttons.
2. Position the end of the hand-held transmitter 1 to 3 in (20 to 70 mm) away from the HomeLink® surface.
3. Using both hands, simultaneously push and hold both the HomeLink® button you want to program and the hand-held transmitter button. DO NOT release the buttons until step 4 has been completed.
4. Hold down both buttons until the indicator light on HomeLink® flashes, changing from a “slow blink” to a “rapid blink”. This could take up to 90 seconds. When the indicator light blinks rapidly, both buttons may be released. The rapidly flashing light indicates successful programming. To activate the garage door or other programmed device, push and hold the programmed HomeLink®
Instruments and controls 2-63
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
Black plate (152,1)
NOTE:
If programming a garage door opener, etc.,
it is advised to unplug the device during
the “cycling” process to prevent possible
damage to the garage door opener com-
ponents.
OPERATING THE HomeLink® UNIVER-
SAL TRANSCEIVER
GUID-19BE850B-BBDC-470B-9850-DE6B57FF6B98
HomeLink® Universal Transceiver
(once pro-
grammed) may now be used to activate the
garage door, etc. To operate, simply push the
appropriate programmed HomeLink® Universal
Transceiver button. The red indicator light will
illuminate while the signal is being transmitted.
PROGRAMMING TROUBLE-DIAGNO-
SIS
GUID-0B904713-E37A-46A3-9A90-63FADE14E79C
If HomeLink® does not quickly learn the hand-
held transmitter information:
replace the hand-held transmitter batteries with new batteries. position the hand-held transmitter with its battery area facing away from the HomeLink® surface. push and hold both the HomeLink® and hand-held transmitter buttons without inter- ruption. position the hand-held transmitter 2 to 5 in (50 to 127 mm) away from the HomeLink®
5.
button - releasing when the device begins to activate. If the indicator light on HomeLink® blinks rapidly for two seconds and then turns solid, HomeLink® has picked up a “rolling code” garage door opener signal. You will need to proceed with the next steps to train HomeLink®, completing the programming may require a ladder and another person for convenience.
If
6. Push and release the program button located on the garage door opener’s motor to activate the “training mode”. This button is usually located near the antenna wire that hangs down from the motor. the wire originates from under a light lens, you will need to remove the lens to access the training button. NOTE: Once you have pushed and released the training button on the garage door opener’s motor and the “training light” is lit, you have 30 seconds in which to perform step 7. For convenience, use the help of a second person to assist when performing this step.
7. Quickly (within 30 seconds of pushing and releasing the garage door opener training button) and firmly push and release the
2-64 Instruments and controls
HomeLink® button you’ve just programmed. Push and release the HomeLink® button up to three times to complete the training.
8. Your HomeLink® button should now be programmed. To program the remaining HomeLink® buttons for additional door or gate openers, follow steps 2 through 8 only.
NOTE:
Do not repeat step 1 unless you want to
“clear” all previously programmed
HomeLink® buttons.
If you have any questions or are having difficulty
programming your HomeLink® buttons, please
to the HomeLink® web site at: www.
refer
homelink.com or call 1-800-355-3515.
PROGRAMMING HomeLink® FOR CA-
NADIAN CUSTOMERS
GUID-8263D00C-5505-4CBD-9B5E-CB372155C17A
Prior
regulations required
hand-held transmitters to stop transmitting after
2 seconds. To program your hand-held trans-
mitter to HomeLink®, continue to push and hold
the HomeLink® button (note steps 2 through 4
under “Programming HomeLink®”) while you
push and re-push (“cycle”) your hand-held
transmitter every 2 seconds until the indicator
light flashes rapidly (indicating successful pro-
gramming).
to 1992, D.O.C.
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
Black plate (153,1)
may not cause harmful interference, and (2) this device must accept any interfer- ence received, including interference that may cause undesired operation.
Note: Changes or modifications not ex- pressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
For Canada:
This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: this device may not cause interference, and (2) this device must accept any interfer- ence, including interference that may cause undesired operation of the device.
(1)
surface. Hold the transmitter in that position for up to 15 seconds. If HomeLink® is not programmed within that time, try holding the transmitter in another position - keeping the indicator light in view at all times.
If you continue to have programming difficulties,
please contact the NISSAN Consumer Affairs
Department. The phone numbers are located in
the Foreword of this Owner’s Manual.
CLEARING THE PROGRAMMED IN-
FORMATION
GUID-8C1871E3-C252-465F-A399-47B1EB58E018
Individual buttons cannot be cleared, however to
clear all programming, push and hold the two
outside buttons and release when the indicator
light begins to flash (in approximately 20
seconds).
REPROGRAMMING A SINGLE
HomeLink® BUTTON
GUID-2BF52974-A0FA-4080-821F-2E188B5DC58B
To reprogram a HomeLink® Universal Transcei-
ver button, complete the following.
1. Push and hold the desired HomeLink®
button. Do not release the button until step
4 has been completed.
2. When the indicator light begins to flash
slowly (after 20 seconds), position the
hand-held transmitter 2 to 5 in (50 to 127
mm) away from the HomeLink® surface.
3. Push and hold the hand-held transmitter
button.
4. The HomeLink® indicator light will flash, first slowly and then rapidly. When the indicator light begins to flash rapidly, release both buttons.
The HomeLink® Universal Transceiver button
has now been reprogrammed. The new device
can be activated by pushing the HomeLink®
button that was just programmed. This proce-
dure will not affect any other programmed
HomeLink® buttons.
IF YOUR VEHICLE IS STOLEN
GUID-464C8E7D-4693-445C-BEED-4B9B07479827
If your vehicle is stolen, you should change the
codes of any non-rolling code device that has
been programmed into HomeLink®. Consult the
Owner’s Manual of each device or call
the
manufacturer or dealer of
those devices for
additional information.
When your vehicle is recovered, you will
need to reprogram the HomeLink® Univer-
sal Transceiver with your new transmitter
information.
FCC Notice:
For USA:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
Instruments and controls 2-65
Black plate (154,1)
MEMO
2-66 Instruments and controls
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
3 Pre-driving checks and adjustments
Black plate (155,1)
Keys ...
Doors ...
Intelligent Key system ...
Intelligent Key system ... Mechanical key ... Valet hand-off
.............................................................................................. 3-3
......................................................... 3-3
.................................................................... 3-4
...
....................................................................... 3-5
............................................................................................ 3-5
............................................ 3-5
Locking with mechanical key ... Opening and closing windows with the mechanical key ... Locking with inside lock knob ... Locking with power door lock switch ... Automatic door locks ... Child safety rear door lock (Hardtop models)
Intelligent Key operating range ... Door locks/unlocks precaution ... Intelligent Key operation ... Battery saver system ... Warning signals ... Troubleshooting guide ...
..................................................................... 3-6
.......................................... 3-6
............................ 3-7
......................................................... 3-7
............. 3-8
.............................................................. 3-8
..................................... 3-10
..................................... 3-10
................................................. 3-11
....................................................... 3-14
................................................................ 3-14
..................................................... 3-15
............................................. 3-16
.................. 3-17
.......................................................................................... 3-20
.................................................. 3-20
............................................. 3-21
...
............... 3-21
Operating manual lift gate ... Operating power lift gate (if so equipped)
How to use remote keyless entry system ...
...
...
Hood ... Lift gate (Hardtop models)
Remote keyless entry system ...
Soft top (CrossCabriolet models)
Trunk lid (CrossCabriolet models)
...
Auto closure ... Lift gate release ...
Trunk lid release switch ... Trunk open request switch ... Trunk button ... Opening with key ... Trunk release power cancel switch ... Interior trunk lid release ...
.................................................................... 3-24
.............................................................. 3-25
.................................... 3-25
................................................ 3-25
.......................................... 3-26
.................................................................... 3-26
........................................................... 3-26
........................... 3-26
................................................ 3-27
.................................... 3-28
...
.............................................. 3-28
............................................... 3-31
................................................................ 3-32
.................................................. 3-32
........................................ 3-33
............................................................. 3-33
............................................................... 3-34
............... 3-34
.................................................. 3-35
......... 3-36
.............. 3-41
........................................................................ 3-41
...
...
................................................ 3-41
.................................................................. 3-42
Before operating the top ... When operating the top ... Luggage cover Soft top indicator light Automatic window lowering ... Opening the top ... Closing the top ... Opening the top using the intelligent key ... Troubleshooting guide ... If the top does not open or close electrically ... Care of the soft top and the vehicle body ...
Opening fuel-filler door Fuel-filler cap ...
...
...
Fuel-filler door
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
Tilt/telescopic steering ...
Manual operation ... Electric operation ...
.......................................................... 3-44
.............................................................. 3-44
............................................................. 3-44
................................................................................ 3-45
................................................................ 3-45
................................................... 3-45
Hardtop models ... CrossCabriolet models ...
Sun visors ...
Black plate (156,1)
...
Mirrors ...
Inside mirror Outside mirrors ... Vanity mirror
...................................................................................... 3-46
..................................................................... 3-46
............................................................... 3-47
..................................................................... 3-48
................... 3-49
................................. 3-49
.............................................................. 3-49
........................................................... 3-50
Entry/exit function (if equipped) Memory storage ... System operation ...
Automatic drive positioner (if so equipped)
...
...
...
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
Black plate (157,1)
KEYS
GUID-32E91F93-1BF6-407D-9C4D-E11C706B93DC A key number plate is supplied with your keys. Record the key number and keep it in a safe place (such as your wallet), not in the vehicle. If you lose your keys, see a NISSAN dealer for duplicates by using the key number. NISSAN does not record any key numbers so it is very important to keep track of your key number plate. A key number is only necessary when you have lost all keys and do not have one to duplicate from. If you still have a key, this key can be duplicated by a NISSAN dealer.
SPA2406
SPA2865
Type A
Type C
Intelligent Key (2) Mechanical key (inside the key) (2) Key number plate (1)
1.
2.
3.
INTELLIGENT KEY SYSTEM
GUID-64550E60-3C68-49DC-B450-6EF37FA5B9C2
Your vehicle can only be driven with the
Intelligent Keys which are registered to your
vehicle’s Intelligent Key system components and
NISSAN Vehicle Immobilizer System compo-
nents. As many as 4 Intelligent Keys can be
registered and used with one vehicle. The new
keys must be registered by a NISSAN dealer
prior to use with the Intelligent Key system and
NISSAN Vehicle Immobilizer System of your
vehicle. Since the registration process requires
erasing all memory in the Intelligent Key compo-
Pre-driving checks and adjustments 3-3
SPA2431
Type B
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
Black plate (158,1)
SPA2033
MECHANICAL KEY
GUID-3D9FF77C-98B0-40A3-93C5-048839219F68
To remove the mechanical key, release the lock
knob at the back of the key.
To install the mechanical key, firmly insert it into
the key until the lock knob returns to the lock
position.
Use the mechanical key to lock or unlock the
doors and glove box, if they are equipped with a
key cylinder.
See “Doors” later in this section and “Storage”
in the “2. Instruments and controls” section.
— Do not change or modify the
Intelligent Key.
— Do not use a magnet key holder.
— Do not place the Intelligent Key near an electric appliance such as a television set, personal computer or cellular phone.
— Do not allow the Intelligent Key to come into contact with water or salt water, and do not wash it in a washing machine. This could affect the system function.
If an Intelligent Key is lost or stolen, NISSAN recommends erasing the ID code of that Intelligent Key. This will prevent the Intelligent Key from unauthorized use to unlock the vehicle. For information regarding the erasing procedure, please con- tact a NISSAN dealer.
nents when registering new keys, be sure to take all Intelligent Keys that you have to the NISSAN dealer.
CAUTION
. Be sure to carry the Intelligent Key with you when driving. The Intelli- gent Key is a precision device with a built-in transmitter. To avoid dama- ging it, please note the following.
— The Intelligent Key is water resistant; however, wetting may damage the Intelligent Key. If the Intelligent Key gets wet, immediately wipe until it is com- pletely dry.
— Do not bend, drop or strike it
against another object.
— If the outside temperature is below 148F (−108C), the battery of the Intelligent Key may not function properly.
— Do not place the Intelligent Key for an extended period in a place where temperatures ex- ceed 1408F (608C).
3-4 Pre-driving checks and adjustments
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
DOORS
GUID-A6EDA02E-9855-47C0-A2E8-46DEBDFFD06C
CAUTION
WARNING
. Always have the doors locked while driving. Along with the use of seat belts, this provides greater safety in the event of an accident by helping to prevent persons from being thrown from the vehicle. This also helps keep children and others from unintentionally opening the doors, and will help keep out intruders.
. Before opening any door, always look for and avoid oncoming traffic. . Do not leave children unattended inside the vehicle. They could un- knowingly activate switches or con- trols. Unattended children could become involved in serious acci- dents.
Always carry the mechanical key in- stalled in the key.
VALET HAND-OFF
GUID-EFC63B4C-0F15-4531-AA8B-ACA78CB96860
When you have to leave a key with a valet, give
them the Intelligent Key itself after removing the
mechanical key to protect your belongings.
To prevent the glove box or the trunk (Cross-
Cabriolet models) from being opened during
valet hand-off, follow the procedures below.
1. Push the trunk release power cancel switch
to the OFF side (CrossCabriolet models).
2. Remove the mechanical key from the In-
telligent Key.
3. Lock the glove box with the mechanical key. 4. Hand the Intelligent Key to the valet, keeping the mechanical key in your pocket or bag. Insert the mechanical key into the Intelligent Key when you retrieve your vehicle.
See glove box and “Storage” in the “2. Instru- ments and controls” section and “Trunk lid (CrossCabriolet models)” later in this section.
Black plate (159,1)
SPA2432
LOCKING WITH MECHANICAL KEY
GUID-E8E0764D-7E38-467C-AB80-1609CF8DDD47
The power door lock system allows you to lock
or unlock all doors simultaneously using the
mechanical key.
Hardtop models
GUID-0BFF314E-455C-4A8A-9BCF-B9DF3F2390B1
Turning the driver’s door key cylinder to the
front of the vehicle *1 will lock all doors.
Turning the driver’s door key cylinder once
to the rear of the vehicle *2 will unlock the
driver’s door. After returning the key to the
neutral position *3 , turning it to the rear
again within 5 seconds will unlock all doors.
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
Pre-driving checks and adjustments 3-5
Black plate (160,1)
key. (See “Remote keyless entry system” later in this section.) To close the windows, turn the driver’s door key cylinder to lock for longer than 1 second. The door is locked and the window keeps closing while turning the key.
Crosscabriolet models
GUID-E42A3CA3-AD22-4044-A8E7-1CE5A91D11A8
Turning the driver’s door key cylinder to the
rear of the vehicle *2 will lock all doors.
Turning the driver’s door key cylinder once
to the front of the vehicle *1 will unlock the
driver’s door. After returning the key to the
neutral position *3 , turning it to the front
again within 5 seconds will unlock all doors.
Models with color display:
You can switch the lock system to the mode that
allows you to open all the doors when the key is
turned once.
(See “How to use SETTING
button” in the “4. Monitor, heater, air conditioner,
audio, phone and voice recognition systems”
section.)
OPENING AND CLOSING WINDOWS
WITH THE MECHANICAL KEY
GUID-5CA6B107-CCEF-4728-83E6-1D0247152077
The driver’s door key operation also allows you
to open and close the window that is equipped
with the automatic open/close function. (See
“Power windows” in the “2.
Instruments and
controls” section).
To open the windows, turn the driver’s door key
cylinder to unlock for longer than 1 second.
The door is unlocked and the window keeps
opening while turning the key.
This function can also be performed by pushing
and holding the door UNLOCK button of the
3-6 Pre-driving checks and adjustments
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
SPA2465
LOCKING WITH INSIDE LOCK KNOB
GUID-280B5B43-891E-4CBE-9845-1698016E3BD4
To lock the door individually, move the inside
lock knob to the lock position *1
then close the
door.
To unlock, move the inside lock knob to the
unlock position *2 .
When locking the door without Intelligent
Key, be sure not to leave the Intelligent
Key inside the vehicle.
Black plate (161,1)
3. Within 20 seconds of performing Step 2,
push and hold the power door lock switch to
the
position (UNLOCK) for more than 5
seconds.
4. When activated,
the hazard indicator will flash twice. When deactivated, the hazard indicator will flash once.
5. The ignition switch must be placed in the OFF and ON position again between each setting change.
When the automatic door unlock system is deactivated, the doors do not unlock when the ignition switch is placed in the OFF position. To unlock the door manually, use the inside lock knob or the power door lock switch (driver’s or front passenger’s side).
switch to the unlock position *2 .
Lockout protection
GUID-BB47EDF9-3384-43BF-9799-EA35B33C1506
When the power door lock switch (driver or front
passenger) is moved to the lock position with
the Intelligent Key in the port and any door open,
all doors will lock and unlock automatically. With
the Intelligent Key left in the vehicle (not in the
Intelligent Key port) and any door open, all doors
will unlock automatically and a chime will sound
after the door is closed.
These functions help to prevent the Intelligent
Key from being accidentally locked inside the
vehicle.
AUTOMATIC DOOR LOCKS
GUID-FC92C800-B665-49FF-9CDE-4A1CBC7A147B
. All doors will be locked automatically when
the vehicle speed reaches 15 MPH (24
km/h).
. All doors will be unlocked automatically when the ignition switch is placed in the OFF position.
The automatic unlock function can be deactivated or activated. To deactivate or activate the automatic door unlock system, perform the following procedure: 1. Close all doors. 2. Place the ignition switch in the ON position.
SPA2300
LOCKING WITH POWER DOOR LOCK
SWITCH
GUID-DB03598A-E334-478D-9F87-2864156F8581
Operating the power door lock switch will lock
or unlock all the doors. The switches are located
on the driver’s and front passenger’s door
armrests.
To lock the doors, push the power door lock
switch to the lock position *1 with the driver’s
or front passenger’s door open, then close the
door.
When locking the door this way, be certain
not to leave the Intelligent Key inside the
vehicle.
To unlock the doors, push the power door lock
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
Pre-driving checks and adjustments 3-7
Black plate (162,1)
INTELLIGENT KEY SYSTEM
GUID-A26B93CD-32CF-44F2-8707-5F0887B9E015
WARNING
CAUTION
. Radio waves could adversely affect electric medical equipment. Those who use a pacemaker should con- tact the electric medical equipment manufacturer for the possible influ- ences before use.
The Intelligent Key transmits radio waves when the buttons are pushed. The FAA advises that radio waves may affect aircraft navigation and communication systems. Do not operate the Intelligent Key while on an airplane. Make sure the buttons are not operated unintentionally when the unit is stored for a flight.
The Intelligent Key system can operate all the door (including the lift gate) and the trunk lid locks using the remote keyless function or pushing the request switch on the vehicle without taking the key out from a pocket or purse. The operating environment and/or condi- tions may affect the Intelligent Key system operation. Be sure to read the following before using the Intelligent Key system.
. Be sure to carry the Intelligent Key with you when operating the vehi- cle.
. Never leave the Intelligent Key in the vehicle when you leave the vehicle.
The Intelligent Key is always communicating with the vehicle as it receives radio waves. The Intelligent Key system transmits weak radio waves. Environmental conditions may interfere with the operation of the Intelligent Key system under the following operating conditions. . When operating near a location where strong radio waves are transmitted, such as a TV tower, power station and broad- casting station.
. When in possession of wireless equipment, transceiver,
such as a cellular telephone, and CB radio.
. When the Intelligent Key is in contact with or
covered by metallic materials.
. When any type of radio wave remote control
is used nearby.
. When the Intelligent Key is placed near an electric appliance such as a personal
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
SPA2433
CHILD SAFETY REAR DOOR LOCK
(Hardtop models)
GUID-02E4EA0C-4602-4E41-993C-FC56ED415767
The child safety rear door locks help prevent
doors from being opened accidentally, espe-
cially when small children are in the vehicle.
When the levers are in the lock position
*1 , the rear doors can be opened only
from the outside.
To disengage, move the levers to the unlock
position *2 .
3-8 Pre-driving checks and adjustments
Black plate (163,1)
. Do not place the Intelligent Key near equipment that produces a mag- netic field, such as a TV, audio equipment, personal computer or cellular phone.
If an Intelligent Key is lost or stolen, NISSAN recommends erasing the ID code of that Intelligent Key from the vehicle. This may prevent the unauthorized use of the Intelligent Key to operate the vehicle. For information regarding the erasing procedure, contact a NISSAN deal- er. The Intelligent Key function can be disabled. For information about disabling the Intelligent Key function, contact a NISSAN dealer.
computer.
Keys, contact a NISSAN dealer.
. When the vehicle is parked near a parking
meter.
If
In such cases, correct the operating conditions before using the Intelligent Key function or use the mechanical key. Although the life of the battery varies depending on the operating conditions, the battery’s life is approximately 2 years. the battery is dis- charged, replace it with a new one. When the Intelligent Key battery is almost discharged, insert the Intelligent Key into the Intelligent Key port to start the engine. Replace the discharged battery with a new one as soon as possible. For more details, see “Push-button ignition switch” in the “5. Starting and driving” section. Since the Intelligent Key is continuously receiv- ing radio waves, if the key is left near equipment which transmits strong radio waves, such as signals from a TV and personal computer, the battery life may become shorter. For information regarding replacement of a battery, see “Intelligent key battery replacement” in the “8. Maintenance and do-it-yourself” section. As many as 4 Intelligent Keys can be registered and used with one vehicle. For information about the purchase and use of additional Intelligent
CAUTION
. Do not allow the Intelligent Key, which contains electrical compo- nents, to come into contact with water or salt water. This could affect the system function.
. Do not drop the Intelligent Key. . Do not strike the Intelligent Key
sharply against another object.
. Do not change or modify the Intel-
ligent Key.
. Wetting may damage the Intelligent Key. If the Intelligent Key gets wet, immediately wipe until it is comple- tely dry.
If the outside temperature is below 148F (−108C), the battery of the Intelligent Key may not function properly.
. Do not place the Intelligent Key for an extended period in an area where temperatures exceed 1408F (608C).
. Do not attach the Intelligent Key with a key holder that contains a magnet.
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
Pre-driving checks and adjustments 3-9
Black plate (164,1)
INTELLIGENT KEY OPERATING
RANGE
GUID-88C8AC60-C35F-4257-BFE7-BFFE13458197
The Intelligent Key functions can only be used
when the Intelligent Key is within the specified
operating range from the request switch *1 .
When the Intelligent Key battery is discharged or
strong radio waves are present near the operat-
ing location, the Intelligent Key system’s operat-
ing range becomes narrower, and the Intelligent
Key may not function properly.
The operating range is within 31.50 in (80 cm)
from each request switch *1 .
If the Intelligent Key is too close to the door
glass, handle or
the request
rear bumper
3-10 Pre-driving checks and adjustments
SPA2074
SPA2407
switches may not function. When the Intelligent Key is within the operating range, it is possible for anyone who does not carry the Intelligent Key to push the request switch to lock/unlock the doors including the lift gate and open the trunk lid.
DOOR LOCKS/UNLOCKS PRECAU-
TION
GUID-F886F6E8-EB74-4F3A-823E-A3D70ED7F320
. Do not push the door handle request switch
with the Intelligent Key held in your hand as
illustrated. The close distance to the door
handle will cause the Intelligent Key system
to have difficulty recognizing that the In-
telligent Key is outside the vehicle.
. After locking with the door handle request switch, verify the doors are securely locked by testing them.
. When locking the doors using the door handle request switch, make sure to have the Intelligent Key in your possession before operating the door handle request switch to
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
Black plate (165,1)
prevent the Intelligent Key from being left in the vehicle. The door handle request switch is opera- tional only when the Intelligent Key has been detected by the Intelligent Key system. To prevent the Intelligent Key from being left inside the vehicle or the trunk, make sure you carry the key with you and then lock the doors or the trunk.
. Do not pull the door handle before pushing the door handle request switch. The door will be unlocked but will not open. Release the door handle once and pull it again to open the door. The Intelligent Key system (opening/closing doors with the door handle request switch) can be set to remain inactive on the center display (if so equipped). (See “Vehicle information and settings” in the “4. Monitor, heater, air conditioner, audio, phone and voice recognition systems” section.)
SPA2408
SPA2779
INTELLIGENT KEY OPERATION
GUID-11F409E1-2083-4E3E-98C3-276AB17A6B02
You can lock or unlock the doors without taking
the key out from your pocket or bag.
Hardtop models
SPA2780
Pre-driving checks and adjustments 3-11
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
Black plate (166,1)
(driver’s or
When you carry the Intelligent Key with you, you can lock or unlock all doors by pushing the door handle request switch *A front passenger’s) or the lift gate request switch *B within the range of operation. When you lock or unlock the doors or the lift gate/trunk lid, the hazard indicator will flash and the horn (or the outside chime) will sound as a confirmation. For details, see “Setting hazard indicator and horn mode” later in this section.
Locking doors 1. Move the selector lever
GUID-131EB795-ADF4-4035-8A9F-3856D80189ED
to the P (Park)
position, push the ignition switch to the OFF
position and make sure you carry the
Intelligent Key with you.*1
2. Close all the doors and the lift gate.*2
3. Push the door handle request switch *A or
lift gate request switch *B while carrying
the Intelligent Key with you.*3
4. All the doors and the lift gate will lock. 5. The hazard indicator flashes twice and the
outside chime sounds twice.
*1: Doors will lock with the Intelligent Key while the
ignition switch is in the ACC or ON position.
*2: Doors will not lock by pushing the door handle request switch while any door (including the lift gate) is open.
*3: Doors will not lock by pushing the door handle
3-12 Pre-driving checks and adjustments
request switch with the Intelligent Key inside the vehicle. However, when an Intelligent Key is inside the vehicle, doors can be locked with another registered Intelligent Key.
CAUTION
. After locking the doors using the request switch, make sure that the doors have been securely locked by operating the door handles.
. When locking the doors using the request switch, make sure to have the Intelligent Key in your posses- sion before operating the request switch to prevent the Intelligent Key from being left in the vehicle.
The request switch is operational only when the Intelligent Key has been detected by the Intelligent Key system.
Lockout protection:
GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
the Intelligent Key from being
To prevent
accidentally locked in the vehicle,
lockout
protection is equipped with the Intelligent Key
system.
When the driver’s side door is open, the doors
are locked, and then the Intelligent Key is put inside the vehicle and all the doors are closed; the lock will automatically unlock and the door buzzer sounds. NOTE:
The doors may not lock when the Intelli- gent Key is in the same hand that is operating the request switch to lock the door. Put the intelligent key in a purse, pocket or your other hand.
CAUTION
The lockout protection may not function under the following conditions: . When the Intelligent Key is placed
on top of the instrument panel.
. When the Intelligent Key is placed inside the glove box or a storage bin.
. When the Intelligent Key is placed
inside the door pockets.
. When the Intelligent Key is placed
on or under the spare tire area.
. When the Intelligent Key is placed
on the outer side of trunk area.
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
Black plate (167,1)
button on the Intelligent Key is pushed, all doors will be locked automatically after another 1 minute.
GUID-C4223880-DBCA-4D91-ABF0-AFAF15DD1400
Power lift gate open (if so equipped) 1. Carry the Intelligent Key. 2. Push the power lift gate opener switch *C . 3. The lift gate will unlock and automatically
open.
4. The hazard indicator flashes 4 times and the
outside chime sounds.
To close the lift gate, push the power lift gate button on the key, or power lift gate switch on the instrument panel or lower part of the lift gate. (See “Lift gate (Hardtop models)” in the “3. Pre- driving checks and adjustments” section.)
. When the Intelligent Key is placed
inside or near metallic materials.
GUID-E389B864-2ED4-43A0-A072-CBA801BA714E
Unlocking doors 1. Push the door handle request switch *A or the lift gate request switch *B once while carrying the Intelligent Key with you.
2. The hazard indicator flashes once and the outside chime sounds once. The corre- sponding door or the lift gate will unlock.
3. Push the request switch again within 1
minute.
4. The hazard indicator flashes once and the outside chime sounds once again. All the doors and the lift gate will unlock.
All doors will be locked automatically unless one
of the following operations is performed within 1
minute after pushing the request switch while
the doors are locked. If during this 1-minute time
period, the request switch is pushed, all doors
will be locked automatically after another 1
minute.
. Opening any door (including the lift gate)
. Pushing the ignition switch
Inserting the Intelligent Key into the Intelli- gent Key port
During this 1-minute time period, if the UNLOCK
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
SPA2866
CrossCabriolet models
Opening trunk lid (CrossCabriolet mod- els) 1. Push the trunk open request switch *D for
GUID-A3A52D7E-A3C5-486E-B4E3-60918ECC8F87
more than 1 second.
2. The trunk will unlatch. An outside chime will
sound four times.
3. Raise the trunk lid to open the trunk.
Lockout protection:
GUID-D73A39BF-43C8-459F-9C24-47B7F579C407
To prevent
the Intelligent Key from being
accidentally locked in the trunk, lockout protec-
tion is equipped with the Intelligent Key system.
When the trunk lid is closed with the Intelligent
Key inside the trunk,
the outside buzzer will
Pre-driving checks and adjustments 3-13
Black plate (168,1)
sound and the trunk will open.
BATTERY SAVER SYSTEM
GUID-20E66BAB-355C-4A3F-B30F-61C4E89141BD
When all the following conditions are met for 60
minutes, the battery saver system will cut off the
power supply to prevent battery discharge.
The ignition switch is in the ACC position, and
The selector lever is in the P (Park) position.
. All doors are closed, and
WARNING SIGNALS
GUID-737B9BCC-17DA-4349-B877-AC71EFB1D933
To help prevent
the vehicle from moving
unexpectedly by erroneous operation of
the
Intelligent Key listed on the following chart or
to help prevent the vehicle from being stolen,
chime or beep sounds inside and outside the
vehicle and a warning displays in the dot matrix
liquid crystal display.
When a chime or beep sounds or the warning
displays, be sure to check the vehicle and
Intelligent Key.
See “Troubleshooting guide” later in this section
and “Dot matrix liquid crystal display” in the “2.
Instruments and controls” section.
3-14 Pre-driving checks and adjustments
[ Edit: 2011/ 7/ 18 Model: Z51-D ]
Black plate (169,1)
TROUBLESHOOTING GUIDE
GUID-E1D6756A-F1B8-472A-887B-B4B6682D8BDF
When pushing the ignition switch to stop the engine
When shifting the selector lever to the P (Park) position.
Symptom The SHIFT P warning appears on the display and the inside warning chime sounds con- tinuously.
The inside warning chime sounds continuously.
When opening the driver’s door to get out of the vehicle
The inside warning chime sounds continuously.
When closing the door after get- ting out of the vehicle
The NO KEY warning appears on the display, the outside chime sounds 3 times and the inside warning chime sounds for a few seconds.
The SHIFT P warning appears on the display and the outside chime sounds continuously.
When closing the door with the inside lock knob turned to LOCK
The outside chime sounds for a few seconds and all the doors unlock.
When pushing the request switch or the LOCK button on the Intelligent Key to lock the door