CONTROLLER DIAL
WINDSHIELD DEFROSTER BUTTON
REAR WINDOW DEFOGGER BUTTON
REAR ON/OFF BUTTON
REAR LOCK BUTTON
FAN CONTROL BUTTONS
RECIRCULATION BUTTON
AUTO BUTTON
210
MODE BUTTON
AIR CONDITIONING (A/C) BUTTON
OFF BUTTON
SYNC BUTTON
DRIVER’S SIDE TEMPERATURE CONTROL SWITCH
PASSENGER’S SIDE TEMPERATURE CONTROL SWITCH
REAR TEMPERATURE CONTROL SWITCH
2010 Odyssey09/04/10 16:27:17 31SHJ650 0216
Fan Control OnLXandCanadianDXmodels Turn the dial clockwise to increase the fan speed and airflow. Turn the dial counterclockwise to decrease them.
OnEX,EX-LandTouringmodels Press the button to increase the fan speed and airflow. Press the
▲
▼
button to decrease it.
Temperature Control OnLXandCanadianDXmodels Turning this dial clockwise increases the temperature of the airflow.
OnEX,EX-LandTouringmodels Your vehicle has two temperature control switches, one for the driver, and one for the front passenger.
OnEX,EX-LandTouringmodels When the rear passenger’s zone is turned on using the REAR ON/OFF button on the front control panel, a
second row passenger also can adjust the temperature, fan speed and air flow.
OnEX,EX-LandTouringmodels The rear passenger compartment temperature can also be set separately. Press the top ( ▲ appropriate temperature control button to increase the temperature of airflow. Press the bottom ( ) of the button to decrease it. Each set temperature is shown in the display.
) of the
▼
When you set the temperature to its lower limit or its upper limit, it will be displayed as ‘‘Lo’’ or ‘‘Hi’’.
SYNCButton OnEX,EX-LandTouringmodels When you press this button, the indicator in the button comes on, and the passenger’s side temperature and the rear passenger compartment is synchronized to the driver’s side set temperature. Changing the
Vents, Heating, and A/C
passenger’s side temperature or the temperature of the rear passenger compartment makes the indicator go off, and takes the system out of SYNC mode.
Air Conditioning (A/C) Button This button turns the air conditioning on and off. On LX and Canadian DX models, the indicator in the button is on when the A/C is on. On EX, EX-L, and Touring models, you will see A/C ON or A/C OFF in the display.
Recirculation Button When the indicator in the button is on, air from the vehicle’s interior is sent throughout the system again. When the indicator is off, air is brought in from the outside of the vehicle (fresh air mode).
CONTINUED
211
2010 Odyssey09/04/10 16:27:33 31SHJ650 0217
Vents, Heating, and A/C
The outside air intakes for the heating and cooling system are at the base of the windshield. Keep this area clear of leaves and other debris.
Air flows from the floor
vents. When you select system automatically switches to fresh air mode.
, the
Rear Window Defogger Button
This button turns the rear window
defogger on and off (see page
140
).
Airflow is divided between
the floor vents and defroster vents at the base of the windshield.
Mode Control Use the mode control dial or button to select the vents the air flows from. Some air will flow from the dashboard vents in all modes.
Air flows from the center and corner vents in the dashboard.
Airflow is divided between the vents in the dashboard and the floor vents.
Air flows from the defroster vents at the base of the windshield.
, the system
When you select automatically switches to fresh air mode and turns on the A/C. The passenger’s temperature cannot be set separately from the driver’s.
OnLXandCanadianDXmodels
The system automatically turns on the A/C and switches to recirculation mode. Air flows from the center and side vents in the dashboard. In this mode, you cannot turn off the A/C and also cannot switch to fresh air mode.
212
When you switch to
from
, the A/C stays on, and you
can turn it on and off manually.
When you switch to another mode, the A/C returns to its original setting, either on or off, as displayed by the A/C indicator.
REAR/REAR LOCK Button OnEX,EX-LandTouringmodels When you want to change the temperature of the rear passenger compartment, press the REAR button. The indicator in the button comes on, and you can change the temperature using the rear temperature control button. When you press the REAR LOCK button, the indicator in the button comes on, the rear A/C passenger control panel is disabled, and you cannot change any settings from it. See page rear passenger control panel.
for how to operate the
219
2010 Odyssey09/04/10 16:27:45 31SHJ650 0218
Ventilation The ventilation system draws in outside air, circulates it through the interior, then exhausts it through vents near the rear side panels.
1.
2. 3. 4.
Set the temperature control dial or button to the lower limit. Make sure the A/C is off. Select Set the fan to the desired speed.
and fresh air mode.
Using the Heater The heater uses engine coolant to warm the air. If the engine is cold, it will be several minutes before you feel warm air coming from the system.
1. 2. 3.
and fresh air mode.
Select Set the fan to the desired speed. Adjust the warmth of the air with the temperature control dial or buttons.
Vents, Heating, and A/C
Using the A/C
Air conditioning places an extra load
on the engine. Watch the engine
coolant temperature gauge (see page
). If it moves near the red mark,
77
turn off the A/C until the gauge
reads normally.
1.
2.
3. 4.
5.
Press the A/C button. The indicator in the button comes on (LX and Canadian DX models) or ‘‘A/C ON’’ is shown in the display (EX, EX-L and Touring models) when a fan speed is selected. Make sure the temperature is set to the lower limit. Select If the outside air is humid, select recirculation mode. If the outside air is dry, select fresh air mode. Set the fan to the desired speed.
CONTINUED
213
2010 Odyssey09/04/10 16:27:57 31SHJ650 0219
Vents, Heating, and A/C
you can
Iftheinteriorisverywarm, cool it down more rapidly by partially opening the windows, turning on the air conditioning, and setting the fan to maximum speed in fresh air mode.
Dehumidify the Interior Air conditioning, as it cools, removes moisture from the air. When used in combination with the heater, it makes the interior warm and dry.
1. 2. 3. 4.
Switch the fan on. Turn on the air conditioning. Select Adjust the temperature to your preference.
and fresh air mode.
This setting is suitable for all driving conditions whenever the outside temperature is above 32°F (0°C).
214
To Defog and Defrost To remove fog from the inside of the windows:
1. 2.
3.
4.
. The system
Set the fan to high. Select automatically switches to the fresh air mode and turns on the A/C. The indicator in the A/C button will not come on (LX and Canadian DX models), or the A/C ON indicator will not come on (EX, EX-L, and Touring models), if the A/C was off to start with. Adjust the temperature so the airflow feels warm. Select rear window.
to help clear the
When you switch to another mode from , the A/C turns off. But if it was on to start with, it stays on.
To Remove Exterior Frost or Ice From the Windows 1.
Select automatically switches to fresh air mode and turns on the A/C.
. The system
The indicator in the A/C button will not come on (LX and Canadian DX models), or the A/C ON indicator will not come on (EX, EX-L, and Touring models), if the A/C was off to start with. Select Set the fan and temperature controls to maximum level.
2. 3.
To clear the windows faster, you can close the dashboard corner vents by rotating the wheel next to each vent. This sends more warm air to the windshield defroster vents. Once the windshield is clear, select fresh air mode to avoid fogging the windows. For your safety, make sure you have a clear view through all the windows before driving.
2010 Odyssey09/04/10 16:28:07 31SHJ650 0220
Using Automatic Climate Control OnEX,EX-LandTouringmodels The automatic climate control system adjusts the fan speed and airflow levels to maintain the interior temperature you select.
1.
Press the Auto button. The indicator in the button comes on.
2.
Set the desired temperature with the temperature control button. You will see AUTO in the system’s display. You can set the driver’s side temperature and passenger’s side temperature and the temperature of the rear passenger compartment separately. The system automatically selects the proper mix of conditioned and/or heated air that will, as quickly as possible, raise or lower the interior temperature to your preference.
If you set the temperature to its lower or its upper limit, the system runs at full cooling or heating only. It does not regulate the interior temperature.
When you press a fan control button, the fan is taken out of AUTO mode.
Onmodelswithnavigationsystem In AUTO mode, the vehicle’s interior temperature is independently regulated for the driver and passenger. If the driver’s side of the vehicle is getting too much sun, the system will adjust to a lower temperature.
In AUTO mode, the rear passenger compartment temperature is also regulated independently.
Vents, Heating, and A/C
Semi-automatic Operation OnEX,EX-LandTouringmodels You can manually select various functions of the climate control system when it is in fully automatic mode. All other features remain automatically controlled. Making any manual selection causes the word AUTO in the display to go out.
To Turn Everything Off OnLXandCanadianDXmodels Turn the fan speed and temperature control dials all the way to the left, and turn the rear controller dial to the OFF position. OnEX,EX-LandTouringmodels Press the OFF button and the REAR ON/OFF button (indicator is off).
Keep the system completely off for short periods only.
To keep stale air and mustiness from collecting, you should have the fan running at all times.
215
2010 Odyssey09/04/10 16:28:16 31SHJ650 0221
Vents, Heating, and A/C
Voice Control System Onmodelswithnavigationsystem The climate control system can also be operated by voice control. See the navigation system manual for complete details.
OnEX,EX-LandTouringmodels You can adjust the temperature of the rear A/C unit with the REAR button and the rear temperature control switch on the front control panel.
The rear passengers can also adjust the fan speed, temperature, and airflow of the rear A/C unit with the rear control panel.
−
With the dial in this position,
Rear Controller Dial (On front control panel) OnLXandCanadianDXmodels OFF no air flows to the rear vents. The rear control panel cannot be used by a second row passenger to adjust the rear A/C. Turning the dial clockwise changes the fan speed to the rear passengers.
Using the Rear A/C Unit OnLXandCanadianDXmodels You can adjust the airflow of the rear A/C unit with the rear controller dial on the front control panel. The rear passengers can also adjust the direction and the amount of airflow on the rear control panel.
216
−
ON With the dial in this position, the rear control panel can be used by a second row passenger to adjust the rear fan speed, airflow, and temperature.
2010 Odyssey09/04/10 16:28:21 31SHJ650 0222
REAR A/C Controls (On front control panel)
EX, EX-L and Touring models
REAR LOCK BUTTON
Vents, Heating, and A/C
−
When the
OnEX,EX-LandTouringmodels REAR Button indicator in this button is off, no air flows to the rear vents. The rear control panel cannot be used by a second row passenger to adjust the rear A/C. When the indicator in this button is on, the rear temperature can be adjusted with the REAR button in the center of the front control panel. In addition, the rear control panel can be used by a second row passenger to adjust the rear fan speed, airflow, and temperature.
REAR ON/OFF BUTTON
REAR TEMPERATURE CONTROL BUTTON
−
REAR LOCK Button When the indicator in this button is on, the rear control panel is disabled, and the rear A/C can only be controlled by the front control panel.
217
2010 Odyssey09/04/10 16:28:30 31SHJ650 0223
Vents, Heating, and A/C
Rear Control Panel
LX and Canadian DX models
REAR TEMPERATURE CONTROL DIAL
FAN CONTROL DIAL
MODE CONTROL DIAL
218
OnLXandCanadianDXmodels The rear control panel can only be used when the rear controller dial on the front control panel is in the ON position.
Turn the fan control dial clockwise to increase fan speed and airflow.
Select the vents the air flows from with the mode control dial.
When from the rear ceiling vents.
is selected, air flows
When from the rear floor vents.
is selected, air flows
When is selected, airflow is divided between the rear floor vents and rear ceiling vents.
Turn the rear temperature control dial clockwise to increase the temperature of the airflow.
2010 Odyssey09/04/10 16:28:41 31SHJ650 0224
▲
Press the top ( ) of the fan control button to increase the fan speed and airflow. Press the bottom ( ) of the button to decrease it. The level of the fan speed is shown in the display.
▼
Each time you press the mode button, the mode display changes from , then to
, to
When from the rear ceiling vents.
is selected, air flows
When from the rear floor vents.
is selected, air flows
When is selected, airflow is divided between the rear floor vents and rear ceiling vents.
EX, EX-L and Touring models
TEMPERATURE CONTROL BUTTON
FAN CONTROL BUTTON
OnEX,EX-LandTouringmodels The rear control panel can only be used when the indicator in the REAR LOCK button on the front control panel is off.
▲
) of the
Press the top ( temperature control button to increase the temperature of airflow, and the bottom ( ) of the button to decrease it. The temperature you adjust is shown in the system display.
▼
Vents, Heating, and A/C
Pressing the AUTO button puts the system in automatic operation mode. The rear system automatically adjusts the fan speed and airflow levels to maintain the selected temperature of the rear passenger compartment.
Pressing the OFF button shuts off the rear climate control system.
219
2010 Odyssey09/04/10 16:28:48 31SHJ650 0225
Vents, Heating, and A/C, Climate Control Sensors
Rear Ceiling Vents
TAB
Sunlight and Temperature Sensors OnEX,EX-LandTouringmodels
TEMPERATURE SENSOR
LEVER
The direction and quantity of airflow from each rear ceiling vent is adjustable.
To adjust the direction of air coming from a rear ceiling vent, move the tab in the center of each vent back- and-forth, and rotate the vent with the tab. The lever next to each vent can be opened and closed to regulate the amount of airflow.
220
SUNLIGHT SENSOR
The climate control system has three sensors. A sunlight sensor is in the top of the dashboard, and a temperature sensor is next to the steering column. There is also a rear sensor on the rear sidewall near the exhaust vent. Do not cover the sensors or spill any liquid on them.
2010 Odyssey09/04/10 16:28:59 31SHJ650 0226
An audio system is standard on all models. Read the appropriate pages (as shown below) to use your vehicle’s audio system.
LX and Canadian DX models
EX and EX-L models
Audio System
On LX and Canadian DX models, see pages
through
233
222
For vehicles without navigation system, see pages through
234
251
For vehicles with navigation system, see pages
through
252
271
For vehicles with rear entertainment system, see pages
through
285
317
EX and EX-L models with Rear Entertainment System
U.S. EX-L and Touring models with Rear Entertainment System with Navigation System
CONTINUED
221
2010 Odyssey09/04/10 16:29:03 31SHJ650 0227
Playing the AM/FM Radio (LX and Canadian DX models)
FM BUTTON
AM BUTTON
TUNE/SOUND KNOB
PWR/VOL KNOB
PRESET BUTTONS
SCAN BUTTON
SEEK BAR
AUTO SELECT BUTTON
222
2010 Odyssey09/04/10 16:29:11 31SHJ650 0228
Playing the AM/FM Radio (LX and Canadian DX models)
To Play the AM/FM Radio The ignition switch must be in the ACCESSORY (I) or ON (II) position. Turn the system on by pushing the PWR/VOL knob. Adjust the volume by turning the same knob.
The band and frequency that the radio was last tuned to are displayed. To change bands, press the AM or FM button. On the FM band, ST will be displayed if the station is broadcasting in stereo. Stereo reproduction in AM is not available.
On the AM band, AM noise reduction turns on automatically.
To Select a Station You can use any of five methods to find radio stations on the selected band: tune, seek, scan, the preset buttons, and auto select.
−
Use the TUNE knob to
TUNE tune the radio to a desired frequency. Turn the knob right to tune to a higher frequency, or left to tune to a lower frequency.
−
The SEEK function
SEEK searches up and down from the current frequency to find a station with a strong signal. To activate it press the side of the bar, or then release it.
+ −
−
SCAN The scan function samples all stations with strong signals on the selected band. To activate it, press the SCAN button, then release it. You will see SCAN in the display. When the system finds a strong signal, it will stop and play that station for about 10 seconds.
If you do nothing, the system will scan for the next strong station and play it for 10 seconds. When it plays a station that you want to listen to, press the SCAN button again.
CONTINUED
223
2010 Odyssey, press the
Toturnoffautoselect A. SEL (auto select) button. This restores the presets you originally set.
For information on AM/FM radio
frequencies and reception, see page
275
09/04/10 16:29:19 31SHJ650 0229
Playing the AM/FM Radio (LX and Canadian DX models)
−
If you are
AUTO SELECT traveling and can no longer receive your preset stations, you can use the auto select feature to find stations in the local area.
Press the A. SEL button. ‘‘A. SEL’’ appears in the display, and the system goes into scan mode for several seconds. It stores the frequencies of six AM and twelve FM stations in the preset buttons.
You will see a ‘‘0’’ displayed after pressing a preset button if auto select cannot find a strong station for that preset button.
If you do not like the stations auto select has stored, you can store other frequencies on the preset buttons as previously described.
−
Each preset button can
Preset store one frequency on AM and two frequencies on FM.
1.
Select the desired band, AM or FM. You can store one frequency on FM1, and one frequency on FM 2 with each preset button.
2.
Use the tune, seek, or scan function to tune the radio to a desired station.
3.
Pick a preset button, and hold it until you hear a beep.
4.
Repeat steps 1 through 3 to store a total of six stations on AM and twelve stations on FM.
224
2010 Odyssey09/04/10 16:29:25 31SHJ650 0230
Playing the AM/FM Radio (LX and Canadian DX models)
Adjusting the Sound Press the SOUND (TUNE) knob repeatedly to display the bass, treble, balance, and fader settings.
Each mode is shown in the display as
it changes. Turn the SOUND
(TUNE) knob to adjust the setting to
your liking. When the level reaches
the center, you will see ‘‘C’’ in the
display. The system will
automatically return the display to
the selected audio mode about 5
seconds after you stop adjusting a
mode.
Treble/Bass modes to adjust the tone to your liking.
Use the TRE/BAS
−
−
These two
Balance/Fader modes adjust the strength of the sound coming from each speaker. BAL adjusts the side-to-side strength, while FAD adjusts the front-to-back strength.
Audio System Lighting You can use the instrument panel brightness control knob to adjust the illumination of the audio system (see page illuminates when the parking lights are on, even if the system is turned off.
). The audio system
139
225
2010 Odyssey09/04/10 16:29:29 31SHJ650 0231
Playing a Disc (LX and Canadian DX models)
EJECT BUTTON
CD SLOT
DISP BUTTON
226
SCAN/RPT BUTTON
SKIP BAR
DISC
+
BUTTON
DISC
−
BUTTON
RDM BUTTON
CD BUTTON
2010 Odyssey09/04/10 16:29:39 31SHJ650 0232
Playing a Disc (LX and Canadian DX models)
To Play a Disc To load or play discs, the ignition switch must be in the ACCESSORY (I) or ON (II) position.
You operate the disc player with the same controls used for the radio. To select the disc player, press the CD button. You will see ‘‘CD’’ in the display.
Do not use discs with adhesive labels. The label can curl up and cause the disc to jam in the unit.
This audio system can also play
CD-Rs and CD-RWs compressed in
MP3 or WMA formats. When
playing a disc in MP3, you will see
‘‘MP3’’ in the display. In WMA
format, ‘‘WMA’’ will appear in the
display. You can select up to 99
folders, or up to 255 tracks/files.
NOTE: If a file on an MP3 or WMA disc is protected by digital rights management (DRM), the audio unit displays UNSUPPORTED FORMAT, and then skips to the next file.
Video CDs and DVDs do not work in this unit.
−
The specifications for compatible MP3 files are: −
Sampling frequency: 32/44.1/48 kHz (MPEG1) 24/22.05/16 kHz (MPEG2) Bitrate: 32/40/48/56/64/80/96/112/128/ 160/192/224/256/320 kbps (MPEG1) 8/16/24/32/40/48/56/64/80/96/ 112/128/160 kbps (MPEG2) Compatible with variable bitrate and multi-session Maximum layers (including ROOT): 8 layers
−
−
CONTINUED
227
2010 Odyssey09/04/10 16:29:50 31SHJ650 0233
Playing a Disc (LX and Canadian DX models)
The specifications for compatible WMA files are: −
Sampling frequency: 32/44.1/48 kHz Bitrate: 48/64/80/96/128/160/192 kbps Compatible with variable bitrate and multi-session Maximum layers (including ROOT): 8 layers
−
−
−
228
ToLoadaDisc Insert a disc about halfway into the disc slot. The drive will pull the disc in the rest of the way to play it. You operate the disc player with the same controls used for the radio. The number of the current track is shown in the display. When playing a disc in MP3 or WMA, the numbers of the current folder and file are shown. The system will continuously play a disc until you change modes.
You cannot load and play 3-inch (8-cm) discs in this system.
For information on how to handle
and protect compact discs, see page
272
TextDataDisplayFunction Each time you press the DISP (preset 1) button, the display shows you the text data on a disc, if the disc was recorded with text data.
You can see the album, artist, and track name in the display. If a disc is recorded in MP3 or WMA, you can see the folder and file name, and the album, artist, and track tag.
With the folder name, you will see the FOLDER indicator in the display. The TRACK indicator is shown with the file or track name.
When you press and release the DISP button while a disc without text data is playing, you will see ‘‘NO INFO’’ on the display.
The display shows up to 16
characters of selected text data (the
folder name, file name, etc.).
2010 Odyssey09/04/10 16:30:00 31SHJ650 0234
Playing a Disc (LX and Canadian DX models)
When you insert a disc, and the system begins to play.
When playing a CD-DA with text data, the album and track name are shown in the display. With a disc in MP3 or WMA, the display shows the folder and file name.
When you turn on the audio system next time, the system keeps your selection with the DISP button.
If the text data has more than 16
characters, you will see the first 15
characters and the
indicator in
the display. Press and hold the DISP
button until the next 16 characters
are shown. You can see up to 31
characters of the text data.
>
If you press and hold the DISP button again, the display shows the first 16 characters again.
If any letter is not available, it is replaced with ‘‘ . ’’ (dot) in the display. When the disc has no text data, you will see ‘‘NO INFO’’ on the display.
You will also see some text data under these conditions:
When a new folder, file, or track is selected.
When you change the audio mode to play a disc with text data or in MP3 or WMA.
ToChangeorSelectTracks/Files You can use the SKIP bar while a disc is playing to select passages and change tracks (files in MP3/WMA mode).
+
−
Each time you press and SKIP bar, the player
SKIP release the skips forward to the beginning of the next track (file in MP3 or WMA mode). Press and release the − SKIP bar to skip backward to the beginning of the current track. Press it again to skip to the beginning of the previous track.
To move rapidly within a track, press and hold the SKIP bar.
or
CONTINUED
229
2010 Odyssey09/04/10 16:30:06 31SHJ650 0235
Playing a Disc (LX and Canadian DX models)
−
InMP3orWMAmode FOLDER SELECTION To select a different folder, turn the TUNE knob to move to the beginning of the next folder. Turn the knob to the right until it clicks once to skip to the next folder, and to the left to move to the beginning of the current folder. Turn it again to skip to the beginning of the previous folder. Turning the TUNE knob more than two clicks skips several folders.
−
SCAN (TRACK/FILE SCAN)
The scan function samples all tracks
(files in MP3 or WMA) on the disc in
the order they are recorded on the
disc. To activate scan, press and hold
the SCAN/RPT button. You will see
SCAN in the display. You will get a
10 second sampling of each track/
file on the disc. Press and hold the
SCAN/RPT button for about 2
seconds to get out of scan mode and
play the last track/file sampled.
−
InMP3orWMAmode F-SCAN (FOLDER SCAN) This feature, when activated, samples the first file of each folder on the disc. To activate folder scan, press and hold the SCAN/RPT button to select SCAN, then press and release the button again to select folder scan. You will see F-SCAN in the display.
The system plays the first file in the first folder for about 10 seconds. If you do nothing, the system will then play the first files in the next folders for 10 seconds. After playing the first file of the last folder, the system plays normally.
Each time you press and release the SCAN/RPT button, the mode changes from file scan to folder scan, then to normal playing.
230
2010 Odyssey09/04/10 16:30:11 31SHJ650 0236
Playing a Disc (LX and Canadian DX models)
−
REPEAT (TRACK/FILE REPEAT) To continuously replay a track (file in MP3 or WMA mode), press and release the SCAN/RPT button. You will see RPT in the display. Press and hold the SCAN/ RPT button for 2 seconds to turn it off.
−
This feature,
InMP3orWMAmode FOLDER-REPEAT when activated, replays all files on the selected folder in the order they are compressed. To activate folder repeat, press the SCAN/RPT button twice. You will see F-RPT in the display. The system continuously replays the current folder. Press the SCAN/RPT button again to turn it off.
Each time you press and release the SCAN/RPT button, the mode changes from file repeat to folder repeat, then to normal playing.
−
RANDOM (Random within a disc) This feature plays the tracks (the files in MP3 or WMA mode) within a disc in random order. To activate random play, press and release the RDM button. In MP3 or WMA mode, press the RDM button twice to select RDM (within a disc random play). You will see RDM in the display. Press the RDM button again to turn it off.
CONTINUED
231
2010 Odyssey09/04/10 16:30:19 31SHJ650 0237
Playing a Disc (LX and Canadian DX models)
Protecting Compact Discs
For information on how to handle
and protect compact discs, see page
272
) to
To Stop Playing a Disc Press the eject button ( remove the disc. If you eject the disc, but do not remove it from the slot, the system will automatically reload the disc after 10 seconds and put it in pause mode. To begin playing, press the CD button.
Press the AM or FM button to switch to the radio while a disc is playing. Press the CD button to play the disc.
If you turn the system off while a disc is playing, either with the PWR/ VOL knob or by turning off the ignition switch, the disc will stay in the drive. When you turn the system back on, the disc will begin playing where it left off.
−
This
InMP3orWMAmode
FOLDER-RANDOM
feature, when activated, plays all
files on the selected folder in random
order. To activate folder random,
press the RDM button. You will see
F-RDM in the display. The system
will then select and play files
randomly. This continues until you
deactivate folder random by pressing
and holding the RDM button for 2
seconds.
Each time you press and release the RDM button, the mode changes from folder random play to random play (within a disc random play), then to normal play.
232
2010 Odyssey09/04/10 16:30:26 31SHJ650 0238
Disc Player Error Messages (LX and Canadian DX models)
Error Message
Cause
Solution
UNSUPPORTED
FORMAT BAD DISC
Track/File format not supported
CHECK MANUAL
Mechanical Error
PUSH EJECT
BAD DISC
Servo Error
CHECK MANUAL
Current track will skipped. The next supported track or file plays automatically. Press the eject button and pull out the disc. Check the disc for serious damage, signs of deformation, excessive scratches, and/or dirt (see page 273 ). Insert the disc again. If the code does not disappear, or the disc cannot be removed, consult your dealer. Do not try to force the disc out of the player.
The ejected disc will not be reloaded automatically.
The chart on the right explains the error messages you may see in the display while playing a disc.
If you see an error message in the
display while playing a disc, press
the eject button. After ejecting the
disc, check it for damage or
deformation. If there is no damage,
insert the disc again.
For additional information on
damaged discs, see page
273
The audio system will try to play the disc. If there is still a problem, the error message will reappear. Press the eject button, and pull out the disc. Insert a different disc. If the new disc plays, there is a problem with the first disc. If the error message cycle repeats and you cannot clear it, take your vehicle to a dealer.
233
2010 Odyssey09/04/10 16:30:33 31SHJ650 0239
Playing the AM/FM Radio (EX and EX-L models without navigation system)
EX and EX-L models EX-L model is shown.
AM BUTTON
TUNE KNOB
PWR/VOL KNOB
SOUND KNOB
EX and EX-L models with Rear Entertainment System EX-L model is shown.
AM/FM BUTTON
PWR/VOL KNOB
SOUND (TUNE) KNOB
FM BUTTON
PRESET BUTTONS
SCAN BUTTON
PRESET BUTTONS
SCAN BUTTON
SEEK BAR
AUTO SELECT BUTTON
SEEK BAR
AUTO SELECT BUTTON
234
2010 Odyssey09/04/10 16:30:41 31SHJ650 0240
Playing the AM/FM Radio (EX and EX-L models without navigation system)
To Play the AM/FM Radio The ignition switch must be in the ACCESSORY (I) or ON (II) position. Turn the system on by pushing the PWR/VOL knob. Adjust the volume by turning the same knob.
The band and frequency that the radio was last tuned to are displayed. To change bands, press the AM or FM button, or AM/FM button. On the FM band, ST will be displayed if the station is broadcasting in stereo. Stereo reproduction in AM is not available.
On the AM band, AM noise reduction turns on automatically.
To Select a Station You can use any of five methods to find radio stations on the selected band: tune, seek, scan, the preset buttons, and auto select.
−
Use the TUNE knob to
TUNE tune the radio to a desired frequency. Turn the knob right to tune to a higher frequency, or left to tune to a lower frequency.
−
The SEEK function
SEEK searches up and down from the current frequency to find a station with a strong signal. To activate it press the side of the bar, or then release it.
+ −
−
The SCAN function
SCAN samples all stations with strong signals on the selected band. To activate it, press the SCAN button, then release it. You will see SCAN in the display. The system will scan for a station with a strong signal. When it finds one, it will stop and play that station for about 5 seconds.
If you do nothing, the system will then scan for the next strong station and play it for 5 seconds. When it plays a station you want to listen to, press the SCAN button again.
CONTINUED
235
2010 Odyssey09/04/10 16:30:49 31SHJ650 0241
Playing the AM/FM Radio (EX and EX-L models without navigation system)
, press the
Toturnoffautoselect A. SEL (auto select) button. This restores the presets you originally set.
For information on AM/FM radio
frequencies and reception, see page
275
−
If you are
AUTO SELECT traveling and can no longer receive your preset stations, you can use the auto select feature to find stations in the local area.
Press the A. SEL button. ‘‘A. SEL’’ appears in the display, and the system goes into scan mode for several seconds. It stores the frequencies of six AM and twelve FM stations in the preset buttons.
You will see a ‘‘0’’ displayed after pressing a preset button if auto select cannot find a strong station for that preset button.
If you do not like the stations auto select has stored, you can store other frequencies on the preset buttons as previously described.
−
Each preset button can
Preset store one frequency on AM and two frequencies on FM.
1.
Select the desired band, AM or FM. You can store one frequency on FM1, and one frequency on FM 2 with each preset button.
2.
Use the tune, seek, or scan function to tune the radio to a desired station.
3.
Pick a preset button, and hold it until you hear a beep.
4.
Repeat steps 1 through 3 to store a total of six stations on AM and twelve stations on FM.
236
2010 Odyssey09/04/10 16:30:55 31SHJ650 0242
Playing the AM/FM Radio (EX and EX-L models without navigation system)
Adjusting the Sound Press the SOUND (TUNE) knob repeatedly to display the bass, treble, balance, and fader settings.
Each mode is shown in the display as
it changes. Turn the SOUND
(TUNE) knob to adjust the setting to
your liking. When the level reaches
the center, you will see ‘‘C’’ in the
display. The system will
automatically return the display to
the selected audio mode about 5
seconds after you stop adjusting a
mode.
Treble/Bass modes to adjust the tone to your liking.
Use the TRE/BAS
−
−
These two
Balance/Fader modes adjust the strength of the sound coming from each speaker. BAL adjusts the side-to-side strength, while FAD adjusts the front-to-back strength.
Audio System Lighting You can use the instrument panel brightness control knob to adjust the illumination of the audio system (see page illuminates when the parking lights are on, even if the system is turned off.
). The audio system
139
237
2010 Odyssey09/04/10 16:31:02 31SHJ650 0243
Playing the XM Radio (U.S. EX and all EX-L models without navigation system)
U.S. EX and EX-L models U.S. model is shown.
PWR/VOL KNOB
AUX/XM BUTTON
TUNE KNOB
U.S. EX and EX-L models with Rear Entertainment System
U.S. EX model
AUX (XM) BUTTON
PWR/VOL KNOB
TUNE KNOB
XM BUTTON
DISP/MODE BUTTON
PRESET BUTTONS
DISP/MODE BUTTON
PRESET BUTTONS
SCAN BUTTON
CATEGORY BAR
SCAN BUTTON
CATEGORY BAR
238
2010 Odyssey09/04/10 16:31:10 31SHJ650 0244
Playing the XM Radio (U.S. EX and all EX-L models without navigation system)
Your vehicle is capable of receiving XM Radio anywhere in the United States, and Canada, except Hawaii and Alaska. XM is a registered trademark of Sirius XM Radio , Inc. and, XM CANADA is a registered business name of Canadian Satellite Radio Inc.
XM Radio receives signals from two satellites to produce clear, high- quality digital reception. It offers many channels in several categories. Along with a large selection of different types of music, XM Radio allows you to view channel and category selections in the display.
U.S.EXmodels Though it is not equipped with an XM Radio system, your vehicle is ‘‘XM Ready.’’ If you purchase an XM Radio receiver, you can connect it to your vehicle’s audio system to receive XM broadcasts.
Operating the XM Radio To listen to XM Radio, turn the ignition switch to the ACCESSORY (I) or the ON (II) position. Push the PWR/VOL knob to turn on the audio system, and press the AUX/XM button. Adjust the volume by turning the PWR/VOL knob. The last channel you listened to will show in the display.
−
To switch between
MODE channel mode and category mode, press and hold the DISP/MODE button until the mode changes.
In channel mode, you can select all of the available channels. In category mode, such as Jazz, Rock, Classical, etc., you can select all of the channels within that category.
Each time you press and release the DISP/MODE button, the display changes in the following sequence: channel name, channel number, category, artist name, and music title.
On the audio display, you will see the selected CHANNEL (number), CATEGORY, NAME (artist name), and TITLE (music title).
You may experience periods when XM Radio does not transmit the artist’s name and song title information. If this happens, there is nothing wrong with your system.
CONTINUED
239
2010 Odyssey09/04/10 16:31:18 31SHJ650 0245
Playing the XM Radio (U.S. EX and all EX-L models without navigation system)
−
Turn the tune knob left or
TUNE right to select channels. In the category mode, you can only select channels within that category.
CATEGORY the bar ( or category.
− − +
Press either side of ) to select another
−
SCAN The SCAN function gives you a sampling of all channels while in the channel mode. In the category mode, only the stations within that category are scanned. To activate scan, press the SCAN button. The system plays each channel in numerical order for a few seconds, then selects the next channel. When you hear a channel you want to continue listening to, press the button again.
−
You can store up to 12
Preset preset channels using the six preset buttons. Each button stores one channel from the XM1 band and one channel from the XM2 band.
To store a channel: 1.
Press the AUX/XM button. Either XM1 or XM2 will show in the display.
2.
Use the selector knob, or the CATEGORY bar or SCAN button to tune to a desired channel.
In category mode, only channels within that category can be selected. In channel mode, all channels can be selected.
3.
Pick the preset button you want for that channel. Press and hold the button until you hear a beep.
240
2010 Odyssey09/04/10 16:31:27 31SHJ650 0246
Playing the XM Radio (U.S. EX and all EX-L models without navigation system)
4.
Repeat steps 2 and 3 to store the first six channels.
5.
Press the XM button again. The
other XM band will show. Store
the next six channels using steps 2
and 3.
Once a channel is stored, simply press and release the proper preset button to tune to it.
XM Radio Display Messages ‘‘LOADING’’ audio or program information.
XM is loading the
−
−
‘‘OFF AIR’’ currently selected is no longer broadcasting.
The channel
−
The encryption
‘‘UPDATING’’ code is being updated. Wait until the encryption code is fully updated. Channels 0 and 1 should still work normally.
−
The signal is
‘‘NO SIGNAL’’ currently too weak. Move the vehicle to an area away from tall buildings, and with an unobstructed view of the southern horizon.
−
The selected channel
‘‘ - - - - ’’ number does not exist or is not part of your subscription.
‘‘NO INFO’’ channel has no artist or title information at this time.
The selected
−
‘‘CHECK ANTENNA’’ a problem with the XM antenna. Please consult your dealer.
−
There is
CONTINUED
241
2010 Odyssey09/04/10 16:31:36 31SHJ650 0247
Playing the XM Radio (U.S. EX and all EX-L models without navigation system)
Signal may be blocked by mountains or large obstacles to the south.
Signal weaker in these areas.
SATELLITE
GROUND REPEATER
The XM satellites are in orbit over the equator; therefore, objects south of the vehicle may cause satellite reception interruptions. To help compensate for this, ground-based repeaters are placed in major metropolitan areas.
Satellite signals are more likely to be blocked by tall buildings and mountains the farther north you travel from the equator.
242
Depending on where you drive, you may experience reception problems. Interference can be caused by any of these conditions:
Driving on the north side of an east/west mountain road. Driving on the north side of a large commercial truck on an east/west road. Driving in tunnels. Driving on a road beside a vertical wall, steep cliff, or hill to the south of you. Driving on the lower level of a multi-tiered road. Driving on a single lane road alongside dense trees taller than 50 ft. (15 m) to the south of you.
2010 Odyssey09/04/10 16:31:42 31SHJ650 0248
Playing the XM Radio (U.S. EX and all EX-L models without navigation system)
There may be other geographic situations that could affect XM Radio reception.
AsrequiredbytheFCC: Changesormodificationsnotexpressly approvedbythepartyresponsiblefor compliancecouldvoidtheuser’s authoritytooperatetheequipment.
Receiving XM Radio Service If your XM Radio service has expired or you purchased your vehicle from a previous owner, you can listen to a sampling of the broadcasts available on XM Radio. With the ignition switch in the ACCESSORY (I) or the ON (II) position, push the PWR/ VOL knob to turn on the audio system and press the AUX/XM button. A variety of music types and styles will play.
, or at
If you decide to purchase XM Radio service, contact XM Radio at www.xmradio.com 1-800-852-9696. In Canada, contact XM CANADA at www.xmradio.ca at 1-877-209-0079. You will need to give them your radio I.D. number and your credit card number. To get your radio I.D. number, turn the TUNE knob until ‘‘0’’ appears in the display. Your I.D. will appear in the display.
, or
After you’ve registered with XM
Radio, keep your audio system in the
XM Radio mode while you wait for
activation. This should take about 30
minutes.
While waiting for activation, make sure your vehicle remains in an open area with good reception. Once your audio system is activated, ‘‘CATEGORY’’ or ‘‘CH’’ will appear in the display, and you’ll be able to listen to XM Radio broadcasts. XM Radio will continue to send an activation signal to your vehicle for at least 12 hours from the activation request. If the service has not been activated after 36 hours, contact XM Radio. In Canada, contact XM CANADA .
243
2010 Odyssey09/04/10 16:31:49 31SHJ650 0249
Playing Discs (EX and EX-L models without navigation system)
EX and EX-L models
EX and EX-L models with Rear Entertainment System
CD SLOT
LOAD INDICATOR
CD BUTTON
LOAD INDICATOR
CD SLOT
LOAD BUTTON
EJECT BUTTON
LOAD BUTTON
EJECT BUTTON
DISP BUTTON
DISP BUTTON
SCAN/RPT BUTTON
SKIP BAR
DISC
+
BUTTON
RDM BUTTON
DISC
−
BUTTON
CD BUTTON
SKIP BAR +
BUTTON
DISC
SCAN/RPT BUTTON
DISC
−
BUTTON
RDM BUTTON
244
2010 Odyssey09/04/10 16:32:03 31SHJ650 0250
Playing Discs (EX and EX-L models without navigation system)
Operating the CD Changer Your vehicle’s audio system has an in-dash disc changer that holds up to six discs. You operate this disc changer with the same controls used for the radio. To operate the disc changer, the ignition switch must be in the ACCESSORY (I) or ON (II) position.
NOTE: If a file on an MP3 or WMA disc is protected by digital rights management (DRM), the audio unit displays UNSUPPORTED FORMAT, and then skips to the next file.
Video CDs and DVDs do not work in this unit.
Do not use discs with adhesive labels. The label can curl up and cause the disc to jam in the unit.
This audio system can also play