folders, and each folder can hold 255
playable files.
The specifications for compatible
MP3 file are:
– Sampling frequency:
32/44.1/48 kHz (MPEG1) 16/22.05/24 kHz (MPEG2)
– Bitrate:
8/16/24/32/40/48/56/64/80/96/
112/128/160/192/224/256/320
kbps
– Compatible with variable bitrate
and multi-session
120
When playing a disc in WMA, you
will see ‘‘WMA’’ in the display. The
folder and track numbers are
displayed. Each disc can hold up to
200 files within 16 subdirectories, 8
folder layers. A disc can support a
maximum number of 100 folders, and
each folder can hold 255 playable
files.
The specifications for compatible
WMA file are:
– Sampling frequency:
32/44.1/48 kHz
– Bitrate:
48/64/80/96/128/160/192 kbps – Compatible with variable bitrate
and multi-session
NOTE: If a file on an MP3 or WMA disc is protected by digital rights management (DRM), the audio unit displays FORMAT, and then skips to the next file.
2009 Element Playing a Disc (Models without navigation system)
Insert the disc about halfway into the disc slot. The drive will pull the disc in the rest of the way and begin to play it. When the system reaches the end of the disc, it will return to the beginning and play the disc again. To play the radio when a disc is playing, press the AM/FM button. Press the CD/TAPE or CD/AUX button again to switch back to the CD player.
If you turn the system off while a disc is playing, either with the VOL/PWR knob or by turning off the ignition switch, the disc will stay in the drive. When you turn the system back on, the disc will begin playing where it left off. OnEXandSCmodels If you press the DISP/MODE button while playing a disc, additional information (track, album, artist, etc.) may be displayed. ToChangeorSelectTracks/Files OnEXandSCmodels Use the SEEK/SKIP button while a disc is playing to select passages and change tracks (files in MP3/WMA mode). In MP3/WMA mode, use the FOLDER knob to select folders in the disc, and use the SEEK/SKIP button to change files.
SEEK/SKIP - Each time you press and release the , the player skips forward to the beginning of the next track (files in MP3/WMA mode). Press and release the to skip backward to the beginning of the current track. Press it again to skip to the beginning of the previous track. To move rapidly within a track, press and hold OnLXmodels You will see CUE or REW in the display while moving within a track.
or
CONTINUED
121
2009 Element Playing a Disc (Models without navigation system)
REPEAT (TRACK/FILE REPEAT) - To continuously replay a track (files in MP3/WMA mode), press and release the RPT button. You will see RPT in the display. Press the RPT button again to turn it off. OnEXandSCmodels InMP3/WMAmode FOLDER SELECTION - To select a different folder, use the FOLDER knob to move to the beginning of the next folder. Turn the knob right to move to the beginning of the current folder. Turn the knob left to skip to the beginning of the previous folder.
OnEXandSCmodels InMP3/WMAmode FOLDER-RANDOM - This feature, when activated, plays the files within a folder in random order, rather than in the order they are compressed in MP3/WMA. To activate folder random play, press and hold the RDM button. You will see system will then select and play files randomly. This continues until you deactivate folder random play by pressing the RDM button again or selecting a different folder with the FOLDER knob.
RDM in the display. The
OnEXandSCmodels InMP3/WMAmode FOLDER-REPEAT - This feature, when activated, replays all the files on the selected folder in the order they are compressed in MP3/WMA. To activate folder repeat, press and hold the RPT button for 2 seconds. You will see RPT in the display. The system continuously replays the current folder. Press and hold the RPT button for 2 seconds to turn it off. RANDOM (Random within a Disc) - This feature plays the tracks (all files in each folder in MP3/WMA mode) within a disc in random order. To activate random play, press and release the RDM button. You will see RDM in the display. Press the RDM button again to return to normal play.
122
2009 Element OnEXandSCmodels SCAN - The scan function samples all tracks/files on the disc in the order they are recorded. To activate scan, press and hold the SCAN button until you hear a beep. You will see SCAN in the display. You will get a 10 second sampling of each track/ file on the disc. Press the SCAN button again to exit scan and play the last track/file sampled. Pressing either side of the SEEK/ SKIP button also turns off scan.
Playing a Disc (Models without navigation system)
OnEXandSCmodels
InMP3/WMAmode
FOLDER SCAN - This feature,
when activated, samples all files on
the selected folder in order. To
activate folder scan, press and hold
the SCAN button until you hear a
beep. You will see
SCAN in the
display. The system will then play
the first file for about 10 seconds. If
you do nothing, the system will then
play the first file in each folder for 10
seconds. When it plays a file you
want to continue listening to, press
the SCAN button again.
Pressing either side of the SEEK/
SKIP button or selecting a different
folder with the FOLDER knob also
turns off folder scan.
) to
To Stop Playing a Disc Press the eject button ( remove the disc. If you eject the disc, but do not remove it from the slot, the system will automatically reload the disc after 10 seconds (EX and SC models) or 15 seconds (LX model) and put it in pause mode. To begin playing, press the CD/TAPE or CD/ AUX button. Press the AM/FM button to switch to the radio while a disc is playing. To play the disc, press the CD/TAPE or CD/AUX button. If you turn the system off while a disc is playing, either with the VOL/PWR knob or by turning off the ignition switch, the disc will stay in the drive. When you turn the system back on, the disc will begin playing where it left off.
CONTINUED
123
2009 Element If you select an empty slot in the magazine, the changer will search for the next available disc to load and play.
Playing a Disc (Models without navigation system)
Audio System Malfunction See pages 125 and 126 for information on error messages. Protecting Discs For information on how to handle and protect discs, see page 183.
Operating the Optional Disc
Changer
OnLXmodel
An optional six disc changer is
available for your vehicle. This disc
changer uses the same controls used
for the in-dash disc player or the
radio.
Load the desired discs in the
magazine, and load the magazine in
the changer according to the
instructions that came with the unit.
To select the disc changer, press the
CD/TAPE button. The disc and track
numbers will be displayed. To select
a different disc, use the preset 5
(DISC -) or the preset 6 (DISC +)
button. To select the previous disc,
press the preset 5 (DISC -), or the
preset 6 (DISC +) to select the next
disc in sequence.
124
2009 Element Disc Player Error Messages (Models without navigation system)
The chart on the right explains the error messages you may see in the display while playing a disc. If you see an error message in the display while playing a disc, press the eject button. After ejecting the disc, check it for damage or deformation. If there is no damage, insert the disc again. For additional information on damaged discs, see page 184. The audio system will try to play the disc. If there is still a problem, the error message will reappear. Press the eject button, and pull out the disc. Insert a different disc. If the new disc plays, there is a problem with the first disc. If the error message cycle repeats and you cannot clear it, take your vehicle to a dealer.
Error
Message
Cause ꐀ HEAT ERROR High temperature ꐁ
HOT
ꐀ FORMAT
Track/File format not supported
ꐁ
DISC
FOCUS error
ꐀ
ꐁ
ꐀ
BAD DISC PLEASE CHECK
OWNER'S MANUAL
PUSH EJECT
Mechanical error
ERR
BAD DISC PLEASE CHECK
OWNER'S MANUAL
Servo error
ꐀ: EX and SC models ꐁ: LX model
Solution
Will disappear when the temperature returns to normal. Current track will be skipped. The next supported track or file plays automatically. Press the EJECT button, and pull out the disc. Check if it is inserted correctly in the disc player. Make sure the disc is not scratched or damaged. For more information, see page 184. Press the EJECT button, and pull out the disc. Check the disc for serious damage, sign of deformation, excessive scratches, and/or dirt see page 184. Insert the disc again. If the code does not disappear, or the disc cannot be removed, consult your dealer. Do not try to force the disc out of the player.
125
2009 Element Disc Changer Error Messages (Models without navigation system)
If you see an error message in the display while playing a disc, find the cause in the chart to the right. If you cannot clear the error message, take your vehicle to your dealer.
Error
Message
Cause
DISC
FOCUS error
NO
No disc in the magazine
ERR
Mechanical error
HOT
EJEC
High temperature
No magazine in the changer
Solution
Press the EJECT button, and pull out the disc. Check if it is inserted correctly in the disc player. Make sure the disc is not scratched or damaged. For more information, see page 184. Insert disc. Press the EJECT button, and pull out the disc. Check the disc for damage or deformation. For more information, see page 184. If the disc cannot be pulled out, or the error message does not disappear after the disc is ejected, see your dealer. Will disappear when the temperature returns to normal. Insert magazine.
126
2009 Element Playing the FM/AM Radio (Models with navigation system)
Voice Control System In addition to the standard audio controls, the audio system in your vehicle can be operated using the voice control system. See the navigation section in your Quick Start Guide for an overview of this system, and the Navigation System Manual for complete details.
Playing the FM/AM Radio
FM1 ICON
FM2 ICON
AM ICON
AM/FM BUTTON
AUDIO BUTTON
SCAN BUTTON
TUNER BAR
PRESET BUTTONS
AUTO SELECT ICON
BACKGROUND ICON SOUND ICON
CONTINUED
127
2009 Element Playing the FM/AM Radio (Models with navigation system)
The band and frequency that the radio was last tuned to are displayed. To change bands, press the AM/FM button, or touch the desired band icon (FM1, FM2, AM, XM1, or XM2). On the FM band, STEREO will be displayed if the station is broadcasting in stereo. Stereo reproduction on AM is not available. For information on XM Radio, see page 132.
To Play the FM/AM Radio The ignition switch must be in the ACCESSORY (I) or ON (II) position. Turn the system on by pushing the power/volume knob or the AM/FM button. Adjust the volume by turning the power/volume knob. Pushing the AUDIO button will also turn on the system. You can also operate the audio system without using the control icons on the audio screen. Use the control buttons on the left side of the screen. The status bar appears on the bottom of the screen each time you operate any of the control buttons. On the navigation screen, you can also see audio information by touching the AUDIO INFO icon on the lower of the screen.
128
side of the bar to tune to
To Select a Station You can use any of five methods to find radio stations on the selected band: tune, seek, scan, the preset buttons, and auto select. TUNE - Use the TUNE bar to tune the radio to a desired frequency. Press the a higher frequency, and press the side to tune to a lower frequency. Press and hold the TUNE bar until you hear two beeps to change the frequency rapidly. Release the bar when the display reaches the desired frequency. SEEK - The seek function searches up and down from the current frequency to find a station with a strong signal. To activate it, press and hold the side of the TUNE bar until you hear a beep, then release it.
side of the
or
or
2009 Element Playing the FM/AM Radio (Models with navigation system)
SCAN - The scan function samples all stations with strong signals on the selected band. To activate it, press the SCAN button, then release it. You will see SCAN in the display. The system will scan for a station with a strong signal. When it finds one, it will stop and play that station for about 10 seconds. If you do nothing, the system will then scan for the next strong station and play it for 10 seconds. When it plays a station you want to listen to, press the SCAN button again.
Preset - Each preset button can store one frequency on AM and two frequencies on FM. 1. Select the desired band, AM or FM. FM1 and FM2 let you store six stations each.
2. Use the tune, seek, or scan
function to tune the radio to a desired station.
3. Pick a preset button, and hold it
until you hear a beep.
4. Repeat steps 1 through 3 to store a
total of six stations on AM and twelve stations on FM.
Each preset button's frequency is shown on the bottom of the audio display.
AUTO SELECT - If you are traveling far from home and can no longer receive your preset stations, you can use the auto select feature to find stations in the local area. Press the AUDIO button to view the audio control icons, then press the AUTO SEL icon. You will see AUTO SEL flashing in the display, and the system goes into scan mode for several seconds. It stores the frequencies of six AM, and twelve FM stations in the preset buttons.
CONTINUED
129
2009 Element Playing the FM/AM Radio (Models with navigation system)
You will see a ‘‘0’’ displayed after pressing a preset button if auto select cannot find a strong station for every preset button. If you do not like the stations auto select has stored, you can store other frequencies on the preset buttons as previously described. Toturnoffautoselect,press the AUTO SEL icon. This restores the presets you originally set. For information on FM/AM radio frequencies and reception, see page 186.
130
Adjusting the Sound
SPEAKER SETTING
SOUND ICON
You can adjust the sound on the navigation screen. To adjust the sound, push the AUDIO button, then enter the sound grid by touching the SOUND icon on the display.
BASS/TREBLE SETTING
BASS - Adjusts the bass. TREBLE - Adjusts the treble. To adjust the treble and bass, touch or on each side of the treble or bass adjustment bar. The adjustment bar on the right lower display shows you the current setting. FADER - Adjusts the front-to-back strength of the sound. To adjust the front/rear fader, touch the FR or RR icon.
2009 Element Playing the FM/AM Radio (Models with navigation system)
This function is set to Mid as the default setting when the vehicle leaves the factory. If you feel the sound is too loud, choose low. If you feel the sound is too quiet, choose Hi. You can also select the icon with the joystick. Move it up and down to move the highlighting and scroll through lists. Select the icon, then move the joystick left or right to change the setting. The system will return to the audio display about 10 seconds after you stop adjusting a mode.
ScreenMode You can select the background screen to display the sound level. There are three screen modes: level (the sound level is shown with the vertical bars), spectrum analysis (the sound level appears as ripples of water), and off. Each time you touch the background icon, the display changes. Audio System Lighting You can use the instrument panel brightness control knob to adjust the illumination of the audio system (see page 72). The audio system illuminates when the parking lights are on, even if the radio is off.
or
BALANCE - Adjusts the side-to- side strength of the sound. To adjust the left/right balance, touch the L or R icon. SUBWOOFER - Adjusts the strength of sound from the subwoofer speaker. To adjust the sound strength, touch on each side of the adjustment bar. The right upper display shows you the current setting of the sound strength coming from each speaker. SVC (speed-sensitive volume compensation) - The SVC mode controls the volume based on vehicle speed. The faster you go, the louder the audio volume becomes. As you slow down, the audio volume decreases. Touch the appropriate icon (Low, Mid, Hi, Off) to select the mode.
131
2009 Element Playing the XM® Radio (Models with navigation system)
XM RADIO ICON
MODE ICON
POWER/VOLUME KNOB
AM/FM BUTTON CD/XM (XM RADIO) BUTTON AUDIO BUTTON
SCAN BUTTON
132
TUNE BAR
PRESET BUTTONS
JOYSTICK
CHANNEL INDICATOR
2009 Element Playing the XM® Radio (Models with navigation system)
Your audio system is capable of receiving XM® Radio anywhere in the United States, and Canada, except Hawaii and Alaska. XM® is a registered trademark of XM Satellite Radio®, Inc. XM Radio receives signals from two satellites to produce clear, high- quality digital reception. It offers many channels in several categories. Along with a large selection of different types of music, XM Radio allows you to view channel and category selections in the display. When you press and hold the AUDIO button, the display also shows all XM information.
Operating the XM Radio
To listen to XM Radio, turn the
ignition switch to the ACCESSORY
(I) or the ON (II) position. Press the
CD/XM button to select XM Radio.
Adjust the volume by turning the
knob. The last channel you listened
to will show in the display.
You can also change to the XM Radio
while you are listening to an FM
station, AM station, disc, pc card,
etc., by touching the XM1 or XM2
icon on the audio display.
You can also operate the radio using
the control buttons on the left side of
the screen. The status bar appears on
the bottom of the screen each time
you press any of the control buttons.
On the navigation screen, you can
also see the audio information by
touching the AUDIO INFO icon on
the lower of the screen.
MODE - To switch between channel mode and category mode, touch the MODE icon. In channel mode, you can select all of the available channels. In category mode, such as Jazz, Rock, Classical, etc., you can select all of the channels within that category. Each time you touch and release the MODE icon, the display changes between the channel mode and the category mode.
CONTINUED
133
2009 Element Playing the XM® Radio (Models with navigation system)
TUNE - Press the TUNE bar to change channel selections. Press for higher numbered channels and for lower numbered channels. In the category mode, you can only select channels within that category. CATEGORY - Press and hold either side of the TUNE bar (
or ) until you hear a beep to select
another category. SCAN - The scan function gives you a sampling of all channels while in the channel mode. In the category mode, only the channels within that category are scanned. To activate scan, press the SCAN button or touch the SCAN icon on the screen. The system plays each channel in numerical order for a few seconds, then selects the next channel. When you hear a channel you want to listen to, press the button or touch the icon again.
Preset - You can store up to 12
preset channels using each preset
button or preset icons on the screen.
Each preset button or icon stores one
channel from the XM1 band and one
channel from the XM2 band.
To store a channel:
1. Press the XM button. Either XM1
or XM2 will show in the display.
2. Use the tune, seek, or scan function to tune to a desired channel.
In category mode, only channels within that category can be selected. In channel mode, all channels can be selected. 3. Pick the preset button (icon) you want for that channel. Press and hold the button (icon) until you hear a beep.
On the audio display, you will see the selected CHANNEL (number), CATEGORY, NAME (artist name), and TITLE (music title). You may experience periods when XM Radio does not transmit the artist's name and song title information. If this happens, there is nothing wrong with your system.
134
2009 Element 4. Repeat steps 2 and 3 to store the
first six channels.
5. Press the XM button again or
touch the other XM icon (XM1 or
XM2) on the audio display. Store
the next six channels using steps 2
and 3.
Once a channel is stored, press and release the proper preset button (icon) to tune to it. Each preset button's channel is shown on the bottom of the audio display.
Playing the XM® Radio (Models with navigation system)
ToSelectaChannelfromList
CHANNEL LIST ICON
You can also select a desired channel from the list shown on the screen. Press the AUDIO button to show the audio control display on the navigation screen.
Touch the CHANNEL LIST icon to switch the display to the channel list which shows all channels in all categories. Select and touch a desired channel. To scroll through the display, touch the icon on the side of the screen. To go back to the previous display, touch the Return icon on the screen.
or
CONTINUED
135
2009 Element Playing the XM® Radio (Models with navigation system)
To select a desired icon with the joystick, move it in the appropriate direction, then press ENT.
XM Radio Display Messages
‘‘LOADING’’ - XM is loading the audio or program information. ‘‘OFF AIR’’ - The channel currently selected is no longer broadcasting. ‘‘UPDATING’’ - The encryption code is being updated. Wait until the encryption code is fully updated. Channels 0 and 1 should still work normally.
’’ - The selected channel
‘‘NO SIGNAL’’ - The signal is currently too weak. Move the vehicle to an area away from tall buildings, and with an unobstructed view of the southern horizon. ‘‘ number does not exist or is not part of your subscription. ‘‘NO INFO’’ - This channel has no artist or title information at this time. ‘‘ANTENNA’’ - There is a problem with the XM antenna. Please consult your dealer.
136
2009 Element Playing the XM® Radio (Models with navigation system)
Signal may be blocked by mountains or large obstacles to the south.
Signal weaker in these areas.
SATELLITE
The XM satellites are in orbit over the equator; therefore, objects south of the vehicle may cause satellite reception interruptions. To help compensate for this, ground-based repeaters are placed in major metropolitan areas. Satellite signals are more likely to be blocked by tall buildings and mountains the farther north you travel from the equator. Carrying large items on a roof rack can also block the signal.
GROUND REPEATER
CONTINUED
137
2009 Element Playing the XM® Radio (Models with navigation system)
AsrequiredbytheFCC: Changesormodificationsnotexpressly approvedbythepartyresponsiblefor compliancecouldvoidtheuser's authoritytooperatetheequipment. Receiving XM Radio Service If your XM Radio service has expired or you purchased your vehicle from a previous owner, you can listen to a sampling of the broadcasts available on XM Radio. With the ignition switch in the ACCESSORY (I) or ON (II) position, push the power/volume knob to turn on the audio system and press the CD/XM button. A variety of music types and styles will play.
If you decide to purchase XM Radio
service, contact XM Radio at www.
xmradio.com,or at
1-800-XM-RADIO(967-2346). In
Canada, contact XM Canada at www.
xmradio.ca,or at
1-877-GET-XMSR(438-9677). You will
need to give them your radio I.D.
number and your credit card
number. To get your radio I.D.
number, press the TUNE bar until
‘‘0’’ appears in the display. Your I.D.
will appear in the display.
After you've registered with XM
Radio, keep your audio system in the
XM Radio mode while you wait for
activation. This should take about 30
minutes.
Depending on where you drive, you may experience reception problems. Interference can be caused by any of these conditions: ● Driving on the north side of an
east/west mountain road.
● Driving on the north side of a large commercial truck on an east/west road.
● Driving in tunnels. ● Driving on a road beside a vertical wall, steep cliff, or hill to the south of you.
● Driving on the lower level of a
multi-tiered road.
● Driving on a single lane road
alongside dense trees taller than 50 ft. (15 m) to the south of you.
● Large items carried on a roof rack. There may be other geographic situations that could affect XM Radio reception.
138
2009 Element While waiting for activation, make sure your vehicle remains in an open area with good reception. Once your audio system is activated, you'll be able to listen to XM Radio broadcasts. XM Radio will continue to send an activation signal to your vehicle for at least 12 hours from the activation request. If the service has not been activated after 36 hours, contact XM Radio.
Playing the XM® Radio (Models with navigation system)
139
2009 Element Playing a Disc (Models with navigation system)
CD ICON
JOYSTICK
RDM (RANDOM) BUTTON
FAST FORWARD BUTTON
SKIP ꬽ BUTTON
RPT (REPEAT) BUTTON
REWIND BUTTON
SKIP ꭚ BUTTON
POWER/VOLUME KNOB
OPEN BUTTON
CD/XM BUTTON
AUDIO BUTTON
SCAN BUTTON
TUNE BAR
140
2009 Element Playing a Disc (Models with navigation system)
To Play a Disc You operate the disc player with the same controls used for the radio. To load or play discs, the ignition switch must be in the ACCESSORY (I) or ON (II) position.
Do not use discs with adhesive labels. The label can curl up and cause the disc to jam in the unit.
This audio system can also play CD-Rs and CD-RWs compressed in MP3 or WMA formats. When playing a disc in MP3, you will see ‘‘MP3’’ on the screen. In WMA format, ‘‘WMA’’ will appear on the screen. You can select up to 99 folders and play up to 999 tracks. If the disc has a complex structure, it takes a while to read the disc before the system begins to play it.
If you have a disc that is a combination of CD-DA tracks and MP3/WMA files, you can choose the format to listen by pressing and holding CD/XM button until you hear a beep. Video CDs and DVDs do not work in this unit. The specifications for compatible MP3 files are: – Sampling frequency:
32/44.1/48 kHz (MPEG1) 16/22.05/24 kHz (MPEG2)
– Bitrate:
32/40/48/56/64/80/96/112/128/ 160/192/224/256/320 kbps (MPEG1) 8/16/24/32/40/48/56/64/80/96/ 112/128/160 kbps (MPEG2)
– Compatible with variable bitrate
and multi-session – Maximum layers
(including ROOT): 8 layers
The specifications for compatible WMA files are: – Sampling frequency:
22.05/32/44.1/48 kHz
– Bitrate:
32/40/48/64/80/96/128/160/192
kbps
– Compatible with variable bit rate
and multi-session – Maximum layers
(including ROOT): 8 layers
NOTE: If a file on an MP3 or WMA disc is protected by digital rights management (DRM), the audio unit displays CD FORMAT, and then skips to the next file.
CONTINUED
141
2009 Element Playing a Disc (Models with navigation system)
ToLoadaDisc
DISC SLOT
OPEN BUTTON
The disc player is behind the navigation screen. To use the disc player, press the OPEN button beside the screen. The screen folds back, and the disc player appears.
Insert a disc about halfway into the disc slot. The drive will pull the disc in the rest of the way and begin to play it.
CLOSE BUTTON
To return the screen to the upright position, press the CLOSE button on the edge of the screen panel. Do not use the folded screen as a tray. If you put a cup, for example, on the screen, the liquid inside the cup may spill on the screen when you go over a bump.
142
2009 Element Playing a Disc (Models with navigation system)
Push the AUDIO button beside the
screen to show the audio display and
operate the disc player.
You can also operate the audio
system without using the control
icons on the audio screen. Press the
CD/XM button. The status bar
appears on the bottom of the screen.
On the navigation screen, you can
see the audio information whenever
you touch the AUDIO INFO icon on
the lower portion of the screen.
When playing a CD recorded with
text data, the track, album, and artist
name are shown on the audio
display. When playing a disc in MP3
or WMA, the folder number and
name, the file number and name, the
artist name, and the elapsed time are
shown. The system will continuously
play a disc until you change modes.
If the disc was not recorded with text
data, it will not be displayed.
ToChangeorSelectTracks/Files
PRESET BUTTON'S FUNCTION
PRESET BUTTONS
You can use the preset buttons while a disc is playing to select passages and change tracks (files in MP3 or WMA mode). Each preset button's function is shown on the bottom of the screen.
You can also select an icon with the joystick. Move it to left, right, up, or down to change the highlighting and scroll through lists. Then press the ENT on the top of the joystick to select the icon. SKIP - Each time you press and release (preset 6), the player skips forward to the beginning of the next track (file in MP3 or WMA mode). Press and release
(preset 5), to skip backward to the beginning of the current track. Press it again to skip to the beginning of the previous track. FF/REW - To move rapidly within a track/file, press and hold
(preset 4) or
(preset 3).
CONTINUED
143
2009 Element Playing a Disc (Models with navigation system)
side of the TUNE bar to skip to
InMP3orWMAmode FOLDER SELECTION - To select a different folder, press either side of the TUNE bar to move to the beginning of the next folder. Press the the next folder, and the move to the beginning of the previous folder. TRACK REPEAT (FILE REPEAT) - To continuously replay a track (file in MP3 or WMA mode), press and release the RPT button (preset 1). You will see TRACK REPEAT in the display. Press the RPT button again to turn it off.
side to
InMP3orWMAmode FOLDER RANDOM - This feature, when activated, plays all files in each folder in random order, rather than in the order they are compressed. To activate folder random, press and hold the RDM button (preset 2). You will see FOLDER RANDOM in the display. The system then selects and plays files randomly. This continues until you deactivate folder random by pressing the RDM button again, or if you select a different folder with the TUNE bar.
InMP3orWMAmode FOLDER REPEAT - This feature, when activated, replays all files on the selected folder in the order they are compressed. To activate folder repeat, press and hold the RPT button (preset 1). You will see FOLDER REPEAT in the display. The system continuously replays the current folder. Press the RPT button again to turn it off. Pressing the RDM button or selecting a different folder with the TUNE bar also turns off folder repeat. TRACK RANDOM (Random within a disc/folder) - This feature plays the tracks within a disc (the files within a folder) in random order. To activate track random, press and release the RDM button (preset 2). You will see TRACK RANDOM in the display. Press the RDM button again to return to normal play.
144
2009 Element SCAN (TRACK/FILE SCAN) - The scan function samples all tracks (files in MP3 or WMA) in the order they were recorded. To activate scan, press and release the SCAN button. You will see TRACK SCAN in the display. You will get a 10 second sampling of each track/file on the disc. Press the SCAN button again to get out of scan mode and play the last track/file sampled. Pressing either SKIP button (preset 5 or 6) also turns off scan.
Playing a Disc (Models with navigation system)
InMP3orWMAmode FOLDER SCAN - This feature, when activated, samples all the first files in each folder on the disc in order. To activate folder scan, press and hold the SCAN button. You will see FOLDER SCAN in the display. The system plays the first file in each folder for about 10 seconds. If you do nothing, the system then plays the first file in each folder for 10 seconds each. After playing the first file of the last folder, the system goes to normal playing. Pressing either SKIP button (preset 5 or 6), or selecting a different folder with the TUNE bar, or pressing the SCAN button, also turns off folder scan.
UsingaTrackList
FOLDER ICON
TRACK/FILE LIST
FOLDER NUMBER
RETURN ICON
You can also select a track/file directly from the folder and file lists on the audio display. Press the AUDIO button to show the audio display.
CONTINUED
145
2009 Element Playing a Disc (Models with navigation system)
FOLDER ICON
FOLDER LIST
FOLDER ICON
TRACK/FILE LIST
RETURN ICON Touch the Track List icon to switch the display to the folder list, then select and touch a desired folder.
RETURN ICON The display changes to the file list. Then, select and touch a desired file. Touch the folder icon on the upper left of the screen to move to the parent folder.
or
To scroll through the display, touch the icon on the side of the screen. To go back to the previous display, touch the Return icon. To select a desired icon with the joystick, move it in the appropriate direction, then press ENT. Press the AUDIO button to go back to the normal audio playing display. Pressing the CANCEL button goes back to the previous screen, and pressing the MAP button cancels the audio control display on the screen. When playing a CD recorded with text data, each track name is shown on the audio display. With a disc recorded in MP3 or WMA, the folder number is also displayed. If the disc was not recorded with text data, only the track number is shown.
146
2009 Element Playing a Disc (Models with navigation system)
To Stop Playing a Disc To play the radio when a disc is playing, press the AM/FM button or touch the FM1, FM2, AM, XM1, or XM2 icon. If a PC card is in the audio unit, touch the CARD icon to play the PC card. Press the CD/XM button again or touch the CD icon to switch back to the disc player. To play an audio unit connected to the auxiliary input jack or the USB adapter cable when a disc is playing, touch the AUX icon. If you turn the system off while a disc is playing, either with the power/ volume knob or by turning off the ignition switch, the disc will stay in the drive. When you turn the system back on, the disc will begin playing where it left off.
RemovingaDisc To remove a disc from the audio unit, fold back the screen by pressing the OPEN button (see page 142). Press the disc eject button ( ) to remove the disc. If you eject the disc, but do not remove it from the slot, the system will automatically reload it after 10 seconds and put it in pause mode. To begin playing, press the CD/XM button. To return the screen to the upright position, press the CLOSE button. You cannot close the screen if a disc is partially inserted into its slot. You can also eject the disc when the ignition switch is off.
Protecting Discs For information on how to handle and protect discs, see page 183.
147
2009 Element Disc Player Error Messages (Models with navigation system)
Error
Message
Cause
Solution
FOCUS Error
Mechanical Error
Press the eject button, and pull out the disc. Check if it is inserted correctly in the disc player. Make sure the disc is not scratched or damaged (see page 184).
Press the eject button, and pull out the disc. Check the disc for damage or deformation (see page 184). If the disc cannot be pulled out, or the error message does not disappear after the disc is ejected, see your dealer.
TOC Error
Press the eject button, and pull out the disc. Check the disc for damage or deformation (see page 184).
High Temperature
Will disappear when the temperature returns to normal.
The chart on the right explains the error messages you may see in the display while playing a disc. If you see an error message in the display while playing a disc, press the eject button. After ejecting the disc, check it for damage or deformation. If there is no damage, insert the disc again. For additional information on damaged discs, see page 184. If there is still a problem, the error message will appear again. Press the eject button, and pull out the disc. Insert a different disc. If the new disc plays, there is a problem with the first disc. If the error message cycle repeats and you cannot clear it, take your vehicle to a dealer.
148
2009 Element Playing a PC Card (Models with navigation system)
TRACK LIST ICON
PC CARD ICON
POWER/VOLUME KNOB
OPEN BUTTON
CD/XM BUTTON
AUDIO BUTTON
SCAN BUTTON
TUNE BAR
RDM (RANDOM) BUTTON
FAST FORWARD BUTTON
SKIP ꬽ BUTTON
RPT (REPEAT) BUTTON
REWIND BUTTON
SKIP ꭚ BUTTON
JOYSTICK
PLAY MODE ICON
CONTINUED
149
2009 Element Playing a PC Card (Models with navigation system)
Always use the recommended memory card with the appropriate adapter (if an adapter is needed). Some memory cards will not work in this unit. NOTE: ● When you insert a PC card into the
slot, make sure you put it in straight. If you cannot insert it, remove it, and insert again. ● Do not keep PC cards in the
vehicle. Direct sunlight and high heat will damage them.
● To avoid damaging the card
reader, do not insert hard disc drive cards into the PC card slot.
● You cannot close the screen (move it to the upright position) until the PC card is inserted all the way into its slot or removed.
To Play a PC Card
You operate the PC card player with
the same controls used for the radio
and the disc player. To load or play a
card, the ignition switch must be in
the ACCESSORY (I) or ON (II)
position.
The PC card player reads and plays
cards in MP3 or WMA formats.
Depending on the format, the screen
will indicate ‘‘MP3’’ or ‘‘WMA’’ when
a card is playing. The card limit of
the player is 99 folders and 999
tracks. If the card has a complex
structure, it takes some time for the
system to begin playing it.
Based on PCMCIA 2.1/JEIDA 4.2,
the recommended PC cards for the
PC card reader are:
CompactFlash
Flash ATA
SD memory card
150
● Never insert foreign objects into
the PC card slot.
The specifications for compatible MP3 files are: – Sampling frequency:
32/44.1/48 kHz (MPEG1) 16/22.05/24 kHz (MPEG2)
– Bitrate:
32/40/48/56/64/80/96/112/128/ 160/192/224/256/320 kbps (MPEG1) 8/16/24/32/40/48/56/64/80/96/ 112/128/160 kbps (MPEG2)
– Compatible with variable bitrate
and multi-session – Maximum layers
(including ROOT): 8 layers
2009 Element Playing a PC Card (Models with navigation system)
The specifications for compatible WMA files are: – Sampling frequency:
32/44.1/48 kHz
LoadingaPCCard
PC CARD SLOT
– Bitrate:
48/64/80/96/128/160/192 kbps – Compatible with variable bitrate
and multi-session – Maximum layers
(including ROOT): 8 layers
In WMA format, DRM (digital rights management) files cannot be played. If the system finds a DRM file, it skips that file and plays the next available folder or file.
The PC card slot is behind the navigation screen. To use the PC card player, press the OPEN button beside the screen. The screen folds back, and the PC card slot appears.
Insert a PC card straight into the slot. The drive will read the PC card and begin to play it. Return the screen to the upright position by pressing the CLOSE button on the edge of the screen panel. Push the AUDIO button beside the screen to show the audio display and operate the PC card player. You can also operate the audio system without using the control icons on the audio screen. Press any of the appropriate control buttons. The status bar appears on the bottom of the screen. On the navigation screen, you can see the audio information whenever you touch the AUDIO INFO icon on the screen.
CONTINUED
151
2009 Element Playing a PC Card (Models with navigation system)
There are three play modes: Folder, Artist, and Album. Touch the PLAY MODE icon, then choose one of the modes by touching its icon. When a mode is selected, it is highlighted in blue. ● Folder mode plays tracks in the
order they were added to the card.
● Artist mode plays tracks in
alphabetical order, by artist and song title.
● Album mode plays albums
(folders) in alphabetical order. If play mode information was not included in the tracks when they were added to the card, it will not be displayed on the screen.
152
ToSelectaPlayMode
FOLDER MODE
PLAY MODE ICON
MODE INDICATOR
ARTIST MODE
PLAY MODE ICON
ALBUM MODE
PLAY MODE ICON
MODE INDICATOR
MODE INDICATOR
2009 Element Playing a PC Card (Models with navigation system)
PLAY MODE ICON
To select a play mode, push the AUDIO button to show the audio display, then touch the PLAY MODE icon on the display.
Select the desired mode by touching the appropriate icon, or move the joystick, then press the ENT.
After you select the play mode, the display changes to the selectable playing menu. If you select ‘‘Continue playing the current song,’’ the system goes into the selected play mode after playing the current file.
CONTINUED
153
2009 Element Playing a PC Card (Models with navigation system)
ToChangeorSelectTracks/Files
PRESET BUTTON'S FUNCTION
If you select ‘‘Play a new track list,’’ the system goes into the selected play mode immediately and begins to play the files in order to the new list. To go back to the previous screen, press the CANCEL button on the right side of the screen. To exit the play mode screens, press the AUDIO button.
PRESET BUTTONS
You can use the preset buttons while a card is playing to select or change files. Each preset button's function is shown on the bottom of the screen. Icons on the screen can also be selected with the joystick. Move the joystick left or right and up or down until the icon is highlighted, then press the ENT on the top of the joystick to select the icon.
154
SKIP - Each time you press and release (preset 6), the player skips forward to the beginning of the next file. Press and release
(preset 5), to skip backward to
the beginning of the current file. Press it again to skip to the beginning of the previous file. FF/REW - To move rapidly within a file, press and hold (preset 4) or
(preset 3).
FOLDER SELECTION - To select a different folder, press either side of the TUNE bar to move to the beginning of the next folder. Press the the next folder, and the move to the beginning of the previous folder.
side of the TUNE bar to skip to
side to
2009 Element Playing a PC Card (Models with navigation system)
TRACK RANDOM (Random within a folder) - This feature plays the files within a folder in random order. To activate track random, press and release the RDM button (preset 2). You will see TRACK RANDOM in the display. Press the RDM button again to return to normal play. FOLDER/ARTIST/ALBUM RANDOM - This feature, when activated, plays all files in each folder/artist/album in random order, rather than in the order they are recorded or listed. To activate each random play, press and hold the RDM button (preset 2) for 2 seconds. You will see FOLDER RANDOM, ARTIST RANDOM or ALBUM RANDOM in the display.
The system then selects and plays files randomly. This continues until you deactivate each random play by pressing the RDM button again, or you select a different folder with the TUNE bar (in FOLDER RANDOM mode). SCAN - The scan function samples all files on the PC card in the order they are recorded. To activate scan, press and release the SCAN button. You will see TRACK SCAN in the display. You will get a 10 second sampling of each file on the PC card. Press the SCAN button again to get out of scan mode and play the last file sampled. Pressing either of the SKIP buttons (preset 5 or 6) also turns off the scan feature.
TRACK REPEAT (FILE REPEAT)
- To continuously replay a file,
press and release the RPT button
(preset 1). You will see TRACK
REPEAT in the display. Press the
RPT button again to turn it off.
FOLDER/ARTIST/ALBUM
REPEAT - This feature, when
activated, replays all the files in the
selected folder/artist/album in the
order they are recorded or listed. To
activate each repeat mode, press and
hold the RPT button (preset 1) for 2
seconds. You will see FOLDER
REPEAT, ARTIST REPEAT or
ALBUM REPEAT in the display. The
system continuously replays the
current folder/artist/album. Press
and hold the RPT button for 2
seconds again to turn it off. Pressing
the RDM button, or selecting a
different folder/artist/album with the
TUNE bar also turns off the repeat
feature.
CONTINUED
155
2009 Element Playing a PC Card (Models with navigation system)
UsingaTrackList
FOLDER ICON
TRACK LIST ICON
You can also select a file directly from a track list on the audio display. Press the AUDIO button to show the audio display, then touch the Track List icon. The track list menu appears on the display.
RETURN ICON
or
To scroll through the display, touch the icon on the side of the screen. To go back to the previous display, touch the Return icon.
FOLDER/ARTIST/ALBUM SCAN
- This feature, when activated,
samples the first file in each folder/
artist/album on the PC card in order.
To activate each scan feature, press
and hold the SCAN button until you
hear a beep. You will see FOLDER
SCAN, ARTIST SCAN or ALBUM
SCAN in the display.
The system plays the first file in the
folder for about 10 seconds. If you do
nothing, the system plays the first
file in each folder, in order, for 10
seconds each. After playing the first
file of the last folder/artist/album,
the system returns to normal play.
Pressing either of the SKIP buttons
(preset 5 or 6), selecting a different
folder with the TUNE bar (in
FOLDER RANDOM mode), or
pressing the SCAN button, also turns
off the scan feature.
156
2009 Element Playing a PC Card (Models with navigation system)
ARTIST NAME
ALBUM NAME
To select a folder, touch its icon on the screen. The display changes to the file list, then select a file. In folder mode, touch the folder icon on the upper left of the screen to move to the parent folder. The current folder is highlighted in blue.
In artist mode, the artist name is also displayed on the right side of each selectable icon. Select the desired file.
In album mode, the album name is also displayed on the right side of each selectable icon. Select the desired file. To select a desired icon with the joystick, move it to an appropriate direction, then press ENT.
CONTINUED
157
2009 Element Playing a PC Card (Models with navigation system)
To go back to the normal playing display, press the AUDIO button. Pressing the CANCEL button goes back to the previous screen and pressing the MAP button cancels the audio mode display.
SongSearchFunction
SONG SEARCH ICON
TITLE BY KEYWORD ICON
RETURN ICON
Folder mode is shown. When you select ‘‘Song Search’’ from the track list display, the song search menu appears.
ARTIST ICON
ALBUM ICON
You can then select any of three modes to search a file: Title by Keyword, Artist, and Album.
158
2009 Element Playing a PC Card (Models with navigation system)
SearchingforaSongTitlebyKeyword
MORE ICON
To cancel the selected letter, select the letter and touch the Delete icon. To select more characters, touch the More icon. The other character list will be shown.
FILE LIST
SearchingforaSongbyArtistName
ARTIST LIST
DELETE ICON
LIST ICON
In Title by Keyword mode, enter the title name, or any keyword, by touching the letter icons on the screen. Press the List icon to begin the song search. If you press the CANCEL button on the screen, the display returns to the mode menu without doing a search.
After the system searches for a song, a file list is displayed. To scroll through the list, touch the or icon on the side of the screen. Select the desired file by touching the appropriate icon, or moving the joystick and pressing the ENT.
Select the Artist icon, and the artist list appears. Select the desired artist, and the artist's file list is displayed.
CONTINUED
159
2009 Element Playing a PC Card (Models with navigation system)
SearchingforaSongbyAlbumName
ALBUM LIST
Select the Album icon, and the album list appears. Select the desired album, and its song list is displayed. You can then select the desired song from the list.
160
To Stop Playing a PC Card To play the radio when a PC card is playing, press the AM/FM button or touch the FM1, FM2, AM, XM1, or XM2 icon. If a disc is in the audio unit, press the CD/XM button or touch the CD icon to play the disc. Touch the CARD icon to switch back to the PC card player. To play an audio unit connected to the auxiliary input jack or the USB adapter cable when a PC card is playing, touch the AUX icon. If you turn the system off while a PC card is playing, either with the power/volume knob or by turning off the ignition switch, the card will stay in the drive. When you turn the system back on, the card will begin playing where it left off. When you leave the vehicle, always remove the PC card from the audio unit.
) to
RemovingaPCCard To remove a PC card from the audio unit, fold back the screen by pressing the OPEN button (see page 151). Press the eject button ( remove the card. If you do not remove it from the slot, you cannot return the screen to the upright position. To return the screen to the upright position, press the CLOSE button. You can also eject a card when the ignition switch is off.
2009 Element PC Card Error Messages (Models with navigation system)
If you see an error message in the display while playing a PC card, find the solution in the chart to the right. If you cannot clear the error message, take your vehicle to your dealer.
Error Message
FILE ERROR
NO MUSIC
MEDIA ERROR
Solution
The system cannot read the file(s). Check the files in the disc. There is a possibility that the files have been damaged It appears when the PC card is empty or there are no MP3 or WMA files in the PC card. Save the MP3 or WMA files in the PC card. It appears when the unsupported PC card is inserted. The system supports CompactFlash card, Flash ATA card, and SanDisk memory Card Adapter.
161
2009 Element Playing an iPod® (Models with navigation system)
USB ICON
JOYSTICK
AUDIO CONTROL DISPLAY
MAP BUTTON
CANCEL BUTTON
RDM (RANDOM) BUTTON
FAST FORWARD BUTTON
SKIP ꬽ BUTTON
RPT (REPEAT) BUTTON
REWIND BUTTON
SKIP ꭚ BUTTON
POWER/VOLUME KNOB
iPod INDICATOR
CD/XM BUTTON
AUDIO BUTTON
162
2009 Element Playing an iPod® (Models with navigation system)
To select the USB mode without using the icon, press the CD/XM button repeatedly. The status bar appears on the bottom of the screen. The audio system reads and plays sound files to be playable on the iPod. The system cannot operate an iPod as a mass storage device. The system will only play songs stored on the iPod with iTunes. iPod and iTunes are registered trademarks owned by Apple Inc.
To Play an iPodꭂ This audio system can select and play the audio files on the iPod® with the same controls used for the in-dash disc player. To play an iPod, connect it to the USB adapter cable in the glove box by using your dock connector. Press the AUDIO button beside the screen to show the audio display and touch the AUX icon. The ignition switch must be in the ACCESSORY (I) or ON (II) position. The iPod will also be recharged with the ignition switch in these positions. You can also select an icon by moving the joystick. Move it to left, right, up, or down to change the highlighting and scroll through lists, then press ENT on the top of the joystick to set your selection.
VoiceControlSystem You can select the AUX mode by using the navigation system voice control buttons, but cannot operate the play mode functions. iPods that are compatible with your audio system are listed below.
Model
Firmwareꭧ Ver. 1.2 or more Ver. 1.0 or more Ver. 1.2 or more Ver. 1.1.2 or more
iPod 5G iPod classic iPod nano iPod nano 2nd generation iPod nano 3rd generation iPod touch iPhone ꭧ : Use the latest firmware. Use only compatible iPods with the latest firmware. iPods that are not compatible will not work in this audio unit.
Ver. 1.1.1 or more Ver. 1.1.1 or more
Ver. 1.0 or more
CONTINUED
163
2009 Element Playing an iPod® (Models with navigation system)
ConnectinganiPod
CABLE
USB CONNECTOR
USB ADAPTER CABLE
1. Pull out the USB connector from the holder and remove the cable from the clip in the glove box.
DOCK