Index
Home
Engine Operation Icon
Operating
Not operating
Power is supplied with the engine and the electric motor is assisting the engine.
The electric motor is charging the IMA battery.
Power is supplied with only the engine.
Power is supplied with only the engine and the electric motor is charging the IMA battery.
Continued
89
2013 CR-Z13 CR-Z-31SZT6200.book 90 ページ 2012年10月25日 木曜日 午後9時9分
uuGauges and Multi-Information DisplayuMulti-Information Display
■ Customized Features Use the multi-information display to customize certain features. ■ How to customize Select the CUSTOMIZE SETTINGS screen by pressing the button while the ignition switch is in ON (w, the vehicle is at a complete stop, and the shift lever is in (P (CVT), and the parking brake is set (manual transmission). Press the SEL/RESET button to select CHG SETTING screen.
1Customized Features
To select customizing items, press the button.
2 List of customizable options P. 92
2 Example of customizing settings P. 94
When you customize settings: Automatic transmission (CVT) models Shift to (P.
Manual transmission models Set the parking brake.
QRG
TOC
Button
Press to change the customize menus and items.
SEL/RESET Button Press to set your selection.
Index
Home
90
2013 CR-Z13 CR-Z-31SZT6200.book 91 ページ 2012年10月25日 木曜日 午後9時9分
uuGauges and Multi-Information DisplayuMulti-Information Display
■ Customization flow Press the
button.
CUSTOMIZE SETTINGS
SEL/RESET
CHG SETTING
SEL/RESET
METER SETUP
SEL/RESET
LANGUAGE SELECTION ADJUST OUTSIDE TEMP. DISPLAY TRIP A RESET with REFUEL ELAPSED TIME RESET HOLD ECON MODE METER COLOR CHANGE DISPLAY KM/MILES
LIGHTING SETUP
SEL/RESET
INTERIOR LIGHT DIMMING TIME AUTO LIGHT SENSITIVITY *
Auto Light Sensitivity *
DOOR SETUP
SEL/RESET
AUTO DOOR LOCK
SEL/RESET
EXIT
AUTO DOOR UNLOCK
DOOR LOCK MODE
KEYLESS LOCK ACKNOWLEDGMENT
SECURITY RELOCK TIMER
DEFAULT ALL
EXIT
QRG
TOC
Index
Home
* Not available on all models
Continued
91
2013 CR-Z13 CR-Z-31SZT6200.book 92 ページ 2012年10月25日 木曜日 午後9時9分
uuGauges and Multi-Information DisplayuMulti-Information Display
■ List of customizable options
Setup Group
Customizable Features
Description
Selectable settings
Language Selection
Changes the displayed language.
English*1, French, Spanish
Adjust Outside Temp. Display
Adjusts the temperature reading by a few degrees.
-5°F ~ ±0°F*1 ~ +5°F
-3°C ~ ±0°C*1 ~ +3°C
Trip A Reset with Refuel
Sets Trip A and the average fuel economy to reset when you refuel.
ON, OFF*1
Meter Setup
Elapsed Time Reset
Changes the resetting conditions of the elapsed time.
IGN OFF*1, Trip A, Trip B
QRG
TOC
Hold ECON Mode
Maintains ECON mode.
Meter Color Change
Turns the ambient meter feature on and off.
ON, OFF*1
ON*1, OFF
Display Km/Miles
Changes the displayed measurement on the multi- information display.
AUTO*1, KM, MILES
Interior Light Dimming Time
Changes the length of time the interior lights stay on after you close the doors.
60 sec, 30 sec*1, 15 sec
Auto Light Sensitivity*2
Changes the timing for the headlights to come on. Max, High, Mid*1, Low, Min
Lighting Setup
*1: Default Setting *2: If equipped
Index
Home
92
2013 CR-ZQRG
TOC
13 CR-Z-31SZT6200.book 93 ページ 2012年10月25日 木曜日 午後9時9分
uuGauges and Multi-Information DisplayuMulti-Information Display
Setup Group
Customizable Features
Description
Selectable settings
Auto Door Lock
Changes the setting for the automatic locking feature.
Shift from (P (A/T only), With VEH SPD*1, OFF
Auto Door Unlock
Changes the setting for when the doors and the hatch unlock automatically.
Shift to (P *2, IGN off*3, OFF
Driver Door*1, All Doors
Door Setup
Door Lock Mode
Sets up either the driver’s door or both doors and the hatch to unlock on the first push of the remote.
Key Lock Acknowledgment
LOCK/UNLOCK - The exterior lights flash LOCK (2nd push) - The beeper sounds
Driver Door*1
All Doors
ON*1, OFF
Security Relock Timer
Changes the time it takes for the doors and the hatch to relock and the security system to set after you unlock the vehicle without opening either door or the hatch.
90 sec, 60 sec, 30 sec*1
Default All
Sets/Cancels all the customized settings as default.
Set, Cancel
*1: Default Setting *2: Default Setting on automatic transmission (CVT) models *3: Default Setting on manual transmission models
Index
Home
Continued
93
2013 CR-ZQRG
TOC
13 CR-Z-31SZT6200.book 94 ページ 2012年10月25日 木曜日 午後9時9分
uuGauges and Multi-Information DisplayuMulti-Information Display
■ Example of customizing settings The steps for changing TRIP A RESET with REFUEL setting to ON are shown below. The default setting for TRIP A RESET with REFUEL is OFF.
1. Press the
button until CUSTOMIZE
SETTINGS appears on the display, then press the SEL/RESET button.
2. Press the SEL/RESET button.
3. Press the SEL/RESET button again.
Index
Home
94
2013 CR-ZQRG
TOC
13 CR-Z-31SZT6200.book 95 ページ 2012年10月25日 木曜日 午後9時9分
uuGauges and Multi-Information DisplayuMulti-Information Display
4. Press the
button until TRIP A RESET with REFUEL appears on the display, then press the SEL/RESET button.
5. Press the
button and select ON,
then press the SEL/RESET button.
6. Press the
button until EXIT
appears in the display, then press the SEL/ RESET button.
7. Repeat step 6 until you return to the normal
screen.
Index
Home
95
2013 CR-Z13 CR-Z-31SZT6200.book 96 ページ 2012年10月25日 木曜日 午後9時9分
QRG
Index
Home
96
2013 CR-Z13 CR-Z-31SZT6200.book 97 ページ 2012年10月25日 木曜日 午後9時9分
QRG
Index
Home
This chapter explains how to operate the various controls necessary for driving.
Controls
Setting the Clock ................................ 98
Locking and Unlocking the Doors
Key Types and Functions .................... 99
Locking/Unlocking the Doors from the
Outside .......................................... 100
Locking/Unlocking the Doors from the
Inside ............................................. 102
Auto Door Locking/Unlocking .......... 103
Opening and Closing the Hatch....... 104
Security System
Immobilizer System .......................... 106
Security System Alarm...................... 106
Opening and Closing the Windows..... 108
Operating the Switches Around the
Steering Wheel
Ignition Switch................................. 110
Turn Signals ..................................... 111
Light Switches.................................. 111
Fog Lights* ...................................... 113
Daytime Running Lights ................... 113
Wipers and Washers ........................ 114
Brightness Control ........................... 116
Rear Defogger/Heated Door Mirror*
Button ........................................... 117
Adjusting the Steering Wheel........... 118
Adjusting the Mirrors
Interior Rearview Mirror ................... 119
Power Door Mirrors ......................... 120
Adjusting the Seats
Adjusting the Seat Positions............. 121
Interior Lights/Interior Convenience
Items
Interior Lights .................................. 126
Interior Convenience Items .............. 127
Climate Control System
Using Automatic Climate Control .... 134
Automatic Climate Control Sensors ......136
* Not available on all models
97
2013 CR-Z13 CR-Z-31SZT6200.book 98 ページ 2012年10月25日 木曜日 午後9時9分
Setting the Clock
QRG
Clock Models without navigation system You can adjust the time in the clock display, using the CLOCK (AM/FM) button with the ignition switch in ON (w.
■ Adjusting the Time
TOC
(1 Button
(2 Button
(3 Button
Clock Display
CLOCK Button
1. Press and hold the CLOCK button until the clock display begins to blink.
2. Press the (1 (Hour) button to change the hours.
Index
3. Press the (2 (Minute) button to change the minutes.
4. Press the CLOCK button to go back to the normal display.
Home
98
1Clock
To set the time to the nearest hour: Press and hold the CLOCK button until the clock display begins to blink, then press the (3 (Reset) button.
Depending on the displayed time, the clock sets forward or backward.
Example:
1:06 will reset to 1:00
1:53 will reset to 2:00
Models with navigation system The clock is automatically updated through the navigation system, so the time does not need to be adjusted.
2013 CR-Z13 CR-Z-31SZT6200.book 99 ページ 2012年10月25日 木曜日 午後9時9分
Locking and Unlocking the Doors
QRG
Key Types and Functions This vehicle comes with the following keys:
■ Keys
Key with Remote Transmitter
Use the key to start and stop the engine, and to lock and unlock all the doors and hatch.
You can also use the remote transmitter to lock and unlock the doors and hatch.
■ Key Number Tag
Contains a number that you will need if you purchase a replacement key.
TOC
Index
Home
1Key Types and Functions
All of the keys have an immobilizer system. The immobilizer system helps to protect against vehicle theft.
2 Immobilizer System P. 106
The keys contain precision electronics. Adhere to the following advice to prevent damage to the electronics: • Do not leave the keys in direct sunlight, or in
locations with high temperature or high humidity. • Do not drop the keys or set heavy objects on them. • Keep the keys away from liquids. • Do not take the keys apart except for replacing the
battery.
If the circuits in the keys are damaged, the engine may not start, and the remote transmitter may not work. If the keys do not work properly, have them inspected by a dealer.
1Key Number Tag
Keep the key number tag separate from the key in a safe place outside of your vehicle. If you wish to purchase an additional key, contact a dealer.
If you lose your key and you cannot start the engine, contact a dealer.
99
2013 CR-Z13 CR-Z-31SZT6200.book 100 ページ 2012年10月25日 木曜日 午後9時9分
uuLocking and Unlocking the DoorsuLocking/Unlocking the Doors from the Outside
QRG
Locking/Unlocking the Doors from the Outside ■ Using the Remote Transmitter
LED
Unlock Button
TOC
Lock Button
■ Locking the doors Press the lock button.
Once:
uSome exterior lights flash, all the
doors and hatch lock, and the security system sets.
Twice (within five seconds after the first push):
uA beeper sounds and verifies the security
system is set.
■ Unlocking the doors Press the unlock button. Once:
uSome exterior lights flash twice, and the
driver's door unlocks.
Twice:
u The passenger’s door and the hatch unlock.
Index
Home
100
1Using the Remote Transmitter
If you do not open a door within 30 seconds of unlocking the vehicle with the remote transmitter, the doors and the hatch will automatically relock. You can change the relock timer setting.
2 Customized Features P. 90
If the interior light switch is in the door activated position, the interior lights come on when you press the UNLOCK button. No doors opened: The lights fade out after 30 seconds. Doors relocked with the remote: The lights go off immediately.
2 Interior Lights P. 126
The remote transmitter uses low-power signals, so the operating range may vary depending on the surroundings.
The remote will not lock the vehicle when a door or the hatch is open.
If the distance at which it works varies, the battery is probably low. Replace the button battery as soon as possible. If the LED does not come on when you press a button, the battery is dead.
2 Replacing the Button Battery P. 263
You can customize the door unlock mode setting.
2 Customized Features P. 90
2013 CR-Z13 CR-Z-31SZT6200.book 101 ページ 2012年10月25日 木曜日 午後9時9分
uuLocking and Unlocking the DoorsuLocking/Unlocking the Doors from the Outside
■ Locking/Unlocking the Doors Using a Key
Fully insert the key and turn it.
Unlock
Lock
■ Locking a Door Without Using a Key
■ Locking the driver's door Pull the lock tab rearward a or push the master door lock switch in the lock direction b, and close the door.
■ Locking the passenger's door Pull the lock tab rearward and close the door.
1Locking/Unlocking the Doors Using a Key
When you lock the driver's door with a key, all the doors and hatch lock at the same time. When unlocking, the driver's door unlocks first. Turn the key a second time within a few seconds to unlock the passenger’s door and the hatch.
You can customize the door unlock mode setting.
2 Customized Features P. 90
1Locking a Door Without Using a Key
When you lock the driver's door, all the doors and hatch lock at the same time. Make sure you have the key in your hand before locking the door to prevent it from being locked in the vehicle.
■ Lockout prevention system The doors and the hatch cannot be locked when the key is in the ignition switch, and either door or the hatch is open.
QRG
TOC
Index
Home
101
2013 CR-Z13 CR-Z-31SZT6200.book 102 ページ 2012年10月25日 木曜日 午後9時9分
uuLocking and Unlocking the DoorsuLocking/Unlocking the Doors from the Inside
QRG
Locking/Unlocking the Doors from the Inside ■ Using the Lock Tab
To Lock
To Unlock
Lock Tab
■ Locking a door Pull the lock tab.
■ Unlocking a door Push the lock tab in.
1Using the Lock Tab
When you lock the door using the lock tab on the driver's door, the other door and hatch lock at the same time. When you unlock the door using the lock tab on the driver's door, only the driver's door will unlock.
■ Using the Master Door Lock Switch
Press the master door lock switch in as shown to lock or unlock both doors and the hatch.
1Using the Master Door Lock Switch
When you lock/unlock the driver's door using the master lock switch, all the doors and hatch lock/ unlock at the same time.
To Lock
To Unlock
Master Door Lock Switch
TOC
Index
Home
102
2013 CR-Z13 CR-Z-31SZT6200.book 103 ページ 2012年10月25日 木曜日 午後9時9分
uuLocking and Unlocking the DoorsuAuto Door Locking/Unlocking
1Auto Door Locking/Unlocking
You can turn off or change to another auto door locking/unlocking setting using the multi-information display.
2 Customized Features P. 90
QRG
Auto Door Locking/Unlocking Your vehicle locks all doors and unlocks the driver’s door automatically when a certain condition is met.
■ Auto Door Locking ■ Drive lock mode The auto door lock function automatically locks all the doors and hatch when the vehicle reaches about 10 mph (15 km/h).
■ Auto Door Unlocking Automatic transmission (CVT) models ■ Park unlock mode The driver’s door unlocks when the shift lever is moved into (P with the brake pedal depressed. The settings can be changed to unlock all doors.
Manual transmission models ■ Ignition switch unlock mode The driver’s door unlocks when the ignition switch is moved out of ON (w. The settings can be changed to unlock all doors.
TOC
Index
Home
103
2013 CR-Z1Precautions for Opening/Closing the Hatch
Be careful not to hit your head on the hatch or to put your hands between the hatch and the cargo area when closing the hatch.
When you are storing or picking up luggage from the cargo area while the engine is idling, do not stand in front of the exhaust pipe. You may get burned.
Do not allow any passenger in the cargo space. They may get hurt during hard braking, a sudden acceleration, or a crash.
13 CR-Z-31SZT6200.book 104 ページ 2012年10月25日 木曜日 午後9時9分
Opening and Closing the Hatch
QRG
Precautions for Opening/Closing the Hatch Always make sure individuals and objects are clear of the hatch before opening or closing it.
■ Opening the hatch • Open the hatch all the way.
u If it is not fully opened, the hatch may come down accidentally by its own
weight.
• Be careful when it is windy. The wind may cause the hatch to close.
■ Closing the hatch Keep the hatch closed while driving to:
uAvoid possible damage.
uPrevent exhaust gas from leaking into the vehicle.
2 Carbon Monoxide Gas P. 62
TOC
Index
Home
104
2013 CR-Z13 CR-Z-31SZT6200.book 105 ページ 2012年10月25日 木曜日 午後9時9分
Opening/Closing the Hatch
QRG
Push up the release button on the tailgate after the doors are unlocked.
1Opening/Closing the Hatch
When the driver’s door is locked, the hatch will lock when it is closed.
uuOpening and Closing the HatchuOpening/Closing the Hatch
Release Button
Inner Handle
To close the hatch, grab the inner handle, pull the hatch down, and push it closed from outside.
TOC
Index
Home
105
2013 CR-Z13 CR-Z-31SZT6200.book 106 ページ 2012年10月25日 木曜日 午後9時9分
Security System
QRG
Immobilizer System The immobilizer system prevents a key that has not been pre-registered from starting the engine. Each key contains electronic transmitters that use electronic signals to verify the key.
Pay attention to the following when inserting the key into the ignition switch: • Do not allow objects that emit strong radio waves near the ignition switch.
• Make sure the key is not covered by or touching a metal object.
• Do not bring a key from another vehicle's immobilizer system near the ignition
switch.
1Immobilizer System
NOTICE Leaving the ignition key in the vehicle can result in theft or accidental movement of the vehicle. Always take the ignition key with you whenever you leave the vehicle unattended.
Do not alter the system or add other devices to it. Doing so may damage the system and make your vehicle inoperable.
Security System Alarm The security system alarm activates when the doors, hatch, or hood are opened without the key, or remote transmitter.
1Security System Alarm
The security alarm continues for a maximum of two minutes until the security system alarm deactivates.
■ When the security system alarm activates The horn sounds intermittently, and all of the exterior lights flash.
■ To deactivate the security system alarm Unlock the vehicle using the key or remote transmitter or turn the ignition switch to ON (w. The system, along with the horn and flashing lights, is deactivated.
TOC
Index
Home
106
2013 CR-ZuuSecurity SystemuSecurity System Alarm
1Security System Alarm
Do not set the security system alarm when someone is in the vehicle or a window is open. The system can accidentally activate when unlocking the door with the lock tab or the master door lock switch.
If the 12 volt battery goes dead after you have set the security system alarm, the security alarm may go off once the battery is recharged or replaced. If this occurs, deactivate the security system alarm by unlocking a door using the key or remote transmitter.
Do not attempt to alter this system or add another device to it.
13 CR-Z-31SZT6200.book 107 ページ 2012年10月25日 木曜日 午後9時9分
QRG
TOC
Index
Home
■ Setting the security system alarm The security system alarm automatically sets when the following conditions have been met: • The ignition switch is in LOCK (0, and the key has been removed from the
ignition switch.
• The hood is closed.
• Both doors and the hatch are locked with the key or the remote transmitter.
■ When the security system alarm sets The security system alarm indicator in the instrument panel blinks. When the blinking interval changes after about 15 seconds, the security system alarm is set.
■ To cancel the security system alarm The security system alarm is canceled when the vehicle is unlocked using the key or remote transmitter, or the ignition switch is turned to ON (w. The security system alarm indicator goes off at the same time.
■ Panic Mode
■ The panic button on the remote
transmitter
If you press the panic button for approximately one second, the following will occur for about 30 seconds: • The horn sounds.
Panic Button
• Some exterior lights flash.
■ Canceling panic mode Press any button on the remote transmitter, or turn the ignition switch to ON (w.
107
2013 CR-Z13 CR-Z-31SZT6200.book 108 ページ 2012年10月25日 木曜日 午後9時9分
Opening and Closing the Windows
QRG
Opening/Closing the Power Windows The power windows can be opened and closed when the ignition switch is in ON (w, using the switches on the doors. The driver side switches can be used to open and close both windows.
The power window lock button on the driver side must be switched off (not pushed in) to open and close the passenger’s window from the passenger's side.
TOC
When the power window lock button is pushed in, you can only operate the driver' s window. Turn the power window lock button on if a child rides in the passenger’s seat.
■ Opening/Closing Windows with Auto-Open/Close Function
1Opening/Closing the Power Windows
3WARNING
Closing a power window on someone's hands or fingers can cause serious injury.
Make sure your passenger is away from the window before closing it.
The power windows can be operated for up to 10 minutes after you turn the ignition switch off. Opening either door cancels this function.
Passenger’s Window Switch Driver’s Window Switch
ON
OFF
Power Window Lock Button
■ Automatic operation To open: Push the switch down firmly. To close: Pull the switch up firmly.
Auto Reverse If a power window senses resistance when closing automatically, it will stop closing and reverse direction.
The window opens or closes completely. To stop the window at any time, push or pull the switch briefly.
■ Manual operation To open: Push the switch down lightly. To close: Pull the switch up lightly.
Release the switch when the window reaches the desired position.
The driver’s window auto reverse function is disabled when you continuously pull up the switch.
The auto reverse function stops sensing when the window is almost closed to ensure that it fully closes.
Index
Home
108
2013 CR-Z13 CR-Z-31SZT6200.book 109 ページ 2012年10月25日 木曜日 午後9時9分
uuOpening and Closing the WindowsuOpening/Closing the Power Windows
■ Opening/Closing Windows without Auto-Open/Close Function
To open: Push the switch down. To close: Pull the switch up.
Release the switch when the window reaches the desired position.
QRG
TOC
Index
Home
109
2013 CR-Z13 CR-Z-31SZT6200.book 110 ページ 2012年10月25日 木曜日 午後9時9分
Operating the Switches Around the Steering Wheel
QRG
Ignition Switch
(0 LOCK: Insert and remove the key in this position.
(q ACCESSORY: Operate the audio system and other accessories in this position.
(w ON: This is the position when driving.
(e START: This position is for starting the engine. The switch returns to ON (w when you let go of the key.
1Ignition Switch
Manual transmission models
3WARNING
Removing the key from the ignition switch while driving locks the steering. This can cause you to lose control of the vehicle.
Remove the key from the ignition switch only when parked.
Automatic transmission (CVT) models You cannot take the key out unless the shift lever is in (P.
All models If you open the driver's door when the key is in LOCK (0 or ACCESSORY (q, a warning buzzer will sound to remind you to take the key out. When this happens, the following messages appear on the multi-information display: • In LOCK (0: REMOVE KEY • In ACCESSORY (q: RETURN IGNITION SWITCH
TO LOCK (0) POSITION
The buzzer will stop when you take the key out. If the key won't turn from LOCK (0 to ACCESSORY (q, turn the key while moving the steering wheel left and right. The steering wheel will unlock, allowing the key to turn.
TOC
Index
Home
110
2013 CR-Z13 CR-Z-31SZT6200.book 111 ページ 2012年10月25日 木曜日 午後9時9分
uuOperating the Switches Around the Steering WheeluTurn Signals
Turn Signals
QRG
Right Turn
The turn signals can be used when the ignition switch is in ON (w.
Left Turn
Light Switches ■ Manual Operation
High Beams
Flashing the high beams
Low Beams
Turns on parking, side marker, tail, and rear license plate lights Turns on headlights, parking, side marker, tail, and rear license plate lights
TOC
Index
Home
1Light Switches
If you remove the key from the ignition switch while the lights are on, a chime sounds when the driver’s door is opened.
Do not leave the lights on when the engine is off because it will cause the battery to discharge.
Models with high voltage discharge tube bulbs Repeatedly turning the headlights on and off reduces the life of the HID headlight bulbs. If you sense that the level of the headlights is abnormal, have the vehicle inspected by a dealer.
Rotating the light switch turns the lights on and off, regardless of the position of the ignition switch. ■ High beams Push the lever forward until you hear a click. ■ Low beams When in high beams, pull the lever back to return to low beams. ■ Flashing the high beams Pull the lever back, and release it.
Continued
111
2013 CR-Z13 CR-Z-31SZT6200.book 112 ページ 2012年10月25日 木曜日 午後9時9分
uuOperating the Switches Around the Steering WheeluLight Switches
QRG
TOC
Index
Home
112
■ Automatic Lighting Control*
Automatic lighting control can be used when the ignition switch is in ON (w.
When you turn the light switch to AUTO, the headlights and other exterior lights will switch on and off automatically depending on the ambient brightness.
uYou can change the AUTO light
sensitivity setting.
2 Customized Features P. 90
1Automatic Lighting Control*
We recommend that you turn on the lights manually when driving at night, in a dense fog, or in dark areas such as long tunnels or parking facilities.
The light sensor is in the location shown below. Do not cover this light sensor with anything; otherwise, the automatic lighting system may not work properly.
Light Sensor
Adjust the AUTO light sensitivity as follows:
Setting
MAX HIGH MID LOW MIN
The exterior lights come on when the ambient light is at
Bright
Dark
* Not available on all models
2013 CR-Z13 CR-Z-31SZT6200.book 113 ページ 2012年10月25日 木曜日 午後9時9分
Fog Lights*
QRG
uuOperating the Switches Around the Steering WheeluFog Lights*
When the low beam headlights are on, turn the fog light switch on to use the fog lights.
1Fog Lights*
When the fog lights are on, the indicator in the instrument panel will be on.
2 Indicators P. 66
TOC
Fog Light Switch
Daytime Running Lights Models with bulb type parking lights The high beam headlights come on slightly dimmer than normal when the following conditions have been met: Models with LED type parking/daytime running lights The parking/daytime running lights come on when the following conditions have been met: • The ignition switch is in ON (w.
• The headlight switch is off, or in
• The parking brake is released.
The lights remain on even if you set the parking brake. Turning off the ignition switch will turn off the daytime running lights.
Index
Home
Models with bulb type parking lights The high beam headlights return to the original brightness once the headlight switch is turned on.
* Not available on all models
113
2013 CR-Z13 CR-Z-31SZT6200.book 114 ページ 2012年10月25日 木曜日 午後9時9分
uuOperating the Switches Around the Steering WheeluWipers and Washers
QRG
Wipers and Washers ■ Front Wiper/Washer
Pull to use washer.
Intermittent Time Adjustment Ring
MIST OFF INT: Intermittent LO: Low speed wipe HI: High speed wipe
TOC
Index
Home
114
The windshield wipers and washers can be used when the ignition switch is in ON (w.
■ MIST The wipers run at high speed until you release the lever.
1Wipers and Washers
NOTICE Do not use the wipers when the windshield is dry. The windshield will get scratched, or the rubber blades will get damaged.
NOTICE In cold weather, the blades may freeze to the windshield, becoming stuck.
■ Wiper switch (OFF, INT, LO, HI) Change the wiper switch setting according to the amount of rain.
Operating the wipers in this condition may damage the wipers. Use the defroster to warm the windshield, then turn the wipers on.
■ Adjusting the delay Turn the adjustment ring to adjust the wiper delay.
ADJ
Long delay
Short delay
If the vehicle speeds up while the wipers are operating intermittently, the length of the wipe interval shortens. When the vehicle starts moving, the wipers make a single sweep. When the vehicle speeds up, the wiper operation’s shortest delay setting ( the same.
) and the LO setting become
Turn the washers off if no washer fluid comes out. The pump may get damaged.
■ Washer Sprays while you pull the lever toward you. When you release the lever, the wipers make two or three more sweeps before stopping.
2013 CR-Z13 CR-Z-31SZT6200.book 115 ページ 2012年10月25日 木曜日 午後9時9分
uuOperating the Switches Around the Steering WheeluWipers and Washers
■ Rear Wiper/Washer
The rear wiper and washer can be used when the ignition switch is in ON (w.
If the wiper stops operating due to any obstacle such as the build-up of snow, park the vehicle in a safe place.
1Rear Wiper/Washer
■ Wiper switch (OFF, ON) The wiper operates intermittently after completing a few sweeps.
■ Washer ( Sprays while you rotate the switch to this position. Hold it to activate the wiper and to spray the washer. Once released, it stops operating after a few more sweeps.
Rotate the wiper switch to OFF, and turn the ignition switch to ACCESSORY (q or LOCK (0, then remove the obstacle.
The wiper motor is equipped with a breaker that may stop motor operation temporarily to prevent an overload. Wiper operation will return to normal within a few minutes, once the circuit has returned to normal.
ON: Intermittent OFF Washer
■ Operating in reverse When you shift the transmission to (R with the front wiper activated, the rear wiper operates automatically as follows even if its switch is off.
Front Wiper Position
INT (Intermittent)
LO (Low speed wipe) HI (High speed wipe)
Rear Wiper Operation
Intermittent
Continuous
QRG
TOC
Index
Home
115
2013 CR-Z13 CR-Z-31SZT6200.book 116 ページ 2012年10月25日 木曜日 午後9時9分
uuOperating the Switches Around the Steering WheeluBrightness Control
QRG
Brightness Control
When the ignition switch is in ON (w, you can use the brightness control knob to adjust instrument panel brightness. Brighten: Turn the knob to the right. Dim: Turn the knob to the left.
You will hear a beeper when the brightness reaches minimum or maximum. The multi- information display will return to its original state several seconds after you adjust the brightness.
■ Brightness level indicator The brightness level is shown on the multi- information display while you are adjusting it.
1Brightness Control
Instrument panel brightness varies, depending on whether the exterior lights are on or off. The instrument panel dims to reduce glare when they are on.
Pressing either switches the display.
(information) button
If you turn the knob to the right until the brightness display is up to max, the beeper sounds. This cancels the reduced instrument panel brightness when the parking lights are on.
The brightness can be set differently for when the exterior lights are on, and when they are off.
TOC
Control Knob
Index
Home
116
2013 CR-Z13 CR-Z-31SZT6200.book 117 ページ 2012年10月25日 木曜日 午後9時9分
Rear Defogger/Heated Door Mirror* Button
QRG
uuOperating the Switches Around the Steering WheeluRear Defogger/Heated Door Mirror* Button
Press the rear defogger and heated door mirror button to defog the rear window and mirrors when the ignition switch is in ON (w.
The rear defogger and heated door mirrors automatically switch off after 10-30 minutes depending on the outside temperature. However, if the outside temperature is 32°F (0°C) or below, they do not automatically switch off.
1Rear Defogger/Heated Door Mirror * Button
NOTICE When cleaning the inside of the rear window, be careful not to damage the heating wires. It is critical to wipe the window from side to side along the defogger heating wires.
This system consumes a lot of power, so turn it off when the window has been defogged. Also, do not use the system for a long period when the engine is idling. This may weaken the 12 volt battery, making it difficult to start the engine.
TOC
Index
Home
* Not available on all models
117
2013 CR-Z13 CR-Z-31SZT6200.book 118 ページ 2012年10月25日 木曜日 午後9時9分
uuOperating the Switches Around the Steering WheeluAdjusting the Steering Wheel
QRG
Adjusting the Steering Wheel The steering wheel height and distance from your body can be adjusted so that you can comfortably grip the steering wheel in an appropriate driving posture.
1. Pull the steering wheel adjustment lever up.
To adjust
u The steering wheel adjustment lever is
under the steering column.
TOC
To lock
Lever
2. Move the steering wheel up or down, and
in or out. u Make sure you can see the instrument
panel gauges and indicators.
3. Push the steering wheel adjustment lever
down to lock the steering wheel in position. u After adjusting the position, make sure
you have securely locked the steering wheel in place by trying to move it up, down, in, and out.
1Adjusting the Steering Wheel
3WARNING
Adjusting the steering wheel position while driving may cause you to lose control of the vehicle and be seriously injured in a crash.
Adjust the steering wheel only when the vehicle is stopped.
Make any steering wheel adjustments before you start driving.
Index
Home
118
2013 CR-Z13 CR-Z-31SZT6200.book 119 ページ 2012年10月25日 木曜日 午後9時9分
Adjusting the Mirrors
QRG
Interior Rearview Mirror Adjust the angle of the rearview mirror when you are sitting in the correct driving position.
■ Rearview Mirror with Day and Night Positions*
Flip the tab to switch the position. The night position will help to reduce the glare from headlights behind you when driving after dark.
TOC
Daytime Position
Tab
Night Position
1Adjusting the Mirrors
Keep the inside and outside mirrors clean and adjusted for best visibility.
Adjust the mirrors before you start driving.
2 Adjusting the Seat Positions P. 121
■ Automatic Dimming Rearview Mirror
When driving after dark, the automatic dimming rearview mirror reduces the glare from headlights behind you. Press the auto button to turn this function on and off. When activated, the auto indicator comes on.
1Automatic Dimming Rearview Mirror
The auto dimming function cancels when the shift position is in (R.
Indicator Auto Button
Sensor
Index
Home
* Not available on all models
119
2013 CR-Z13 CR-Z-31SZT6200.book 120 ページ 2012年10月25日 木曜日 午後9時9分
uuAdjusting the MirrorsuPower Door Mirrors
QRG
Power Door Mirrors
Selector Switch
You can adjust the door mirrors when the ignition switch is in ON (w.
■ Mirror position adjustment L/R selector switch: Select the left or right mirror. After adjusting the mirror, return the switch to the center position. Mirror position adjustment switch: Press the switch left, right, up, or down to move the mirror.
Adjustment Switch
TOC
■ Expanded View Driver’s Mirror
Outer Segment
Inner Segment
The driver side door mirror has outer and inner segments.
The outer segment is slightly curved to provide a wider angle view than a standard flat mirror. This wider view may help you check areas that are not visible using a standard door mirror.
1Expanded View Driver’s Mirror
Objects visible in the outer segment of the driver side door mirror appears smaller than objects in the rest of the mirror. But in fact, they are closer than they appear.
Do not rely on your mirrors. Always look to the side and behind your vehicle before changing lanes.
Index
Home
120
2013 CR-Z13 CR-Z-31SZT6200.book 121 ページ 2012年10月25日 木曜日 午後9時9分
Adjusting the Seats
Adjusting the Seat Positions
QRG
Allow sufficient space.
TOC
Move back.
Height Adjustment (Driver side only) Pull up or push down the lever to raise or lower the seat.
Adjust the driver's seat as far back as possible while allowing you to maintain full control of the vehicle. You should be able to sit upright, well back in the seat and be able to adequately press the pedals without leaning forward, and grip the steering wheel comfortably. The passenger's seat should be adjusted in a similar manner, so that it is as far back from the front airbag in the dashboard as possible.
1Adjusting the Seats
3WARNING
Sitting too close to a front airbag can result in serious injury or death if the front airbags inflate.
Always sit as far back from the front airbags as possible while maintaining control of the vehicle.
The National Highway Traffic Safety Administration and Transport Canada recommend that drivers allow at least 10 inches (25 cm) between the center of the steering wheel and the chest.
Always make seat adjustments before driving.
Once a seat is adjusted correctly, rock it back and forth to make sure it is locked in position.
Horizontal Position Adjustment Pull up on the bar to move the seat, then release the bar.
Driver’s seat is shown.
Index
Home
Seat-back Angle Adjustment Pull up the lever to change the angle.
Continued
121
2013 CR-Z13 CR-Z-31SZT6200.book 122 ページ 2012年10月25日 木曜日 午後9時9分
uuAdjusting the SeatsuAdjusting the Seat Positions
■ Adjusting the Seat-Backs
Adjust the driver's seat-back to a comfortable, upright position, leaving ample space between your chest and the airbag cover in the center of the steering wheel.
The passenger should also adjust their seat- back to a comfortable, upright position.
Reclining a seat-back so that the shoulder part of the belt no longer rests against the occupant's chest reduces the protective capability of the belt. It also increases the chance of sliding under the belt in a crash and being seriously injured. The farther a seat-back is reclined, the greater the risk of injury.
1Adjusting the Seat-Backs
3WARNING
Reclining the seat-back too far can result in serious injury or death in a crash.
Adjust the seat-back to an upright position, and sit well back in the seat.
Do not put a cushion, or other object, between the seat-back and your back.
Doing so may interfere with proper seat belt or airbag operation.
If you cannot get far enough away from the steering wheel and still reach the controls, we recommend that you investigate whether some type of adaptive equipment may help.
QRG
TOC
Index
Home
122
2013 CR-Z13 CR-Z-31SZT6200.book 123 ページ 2012年10月25日 木曜日 午後9時9分
uuAdjusting the SeatsuAdjusting the Seat Positions
1Head Restraints
3WARNING
Failure to reinstall, or correctly reinstall, the head restraints can result in severe injury during a crash.
Always replace the head restraints before driving.
The driver’s and passenger’s seats have active head restraints.
2 Active Head Restraints P. 125
■ Head Restraints Your vehicle is equipped with head restraints in both seating positions. However, they are non-adjustable.
Head restraints are most effective for protection against whiplash and other rear- impact crash injuries.
■ Removing and Reinstalling the Head Restraints Head restraints can be removed for cleaning or repair.
To remove the head restraint:
Strap
Band
Release Button
1. Unhook the strap on the outside edge of
the seat-back.
2. Pull out the strap throughout the
band on the outside under edge of the head restraint.
3. Push the release button, and pull the head
restraint upward.
QRG
TOC
Index
Home
Continued
123
2013 CR-Z13 CR-Z-31SZT6200.book 124 ページ 2012年10月25日 木曜日 午後9時9分
uuAdjusting the SeatsuAdjusting the Seat Positions
To install the head restraint:
Magnet
1. Put the legs back in place, then slightly
lower it. uDo not push it down fully until it locks
in place.
2. Insert the strap onto the band, then hook it to the magnet on the outside edge of the seat-back.
3. Push the head restraint down until it locks. Make sure the head restraint locks in place when you reinstall it.
■ Maintain a Proper Sitting Position After all occupants have adjusted their seats, and put on their seat belts, it is very important that they continue to sit upright, well back in their seats, with their feet on the floor, until the vehicle is safely parked and the engine is off.
Sitting improperly can increase the chance of injury during a crash. For example, if an occupant slouches, lies down, turns sideways, sits forward, leans forward or sideways, or puts one or both feet up, the chance of injury during a crash is greatly increased.
In addition, an occupant who is out of position in the seat can be seriously or fatally injured in a crash by striking interior parts of the vehicle or being struck by an inflating front airbag.
QRG
TOC
Index
Home
124
1Maintain a Proper Sitting Position
3WARNING
Sitting improperly or out of position can result in serious injury or death in a crash.
Always sit upright, well back in the seat, with your feet on the floor.
2013 CR-Z13 CR-Z-31SZT6200.book 125 ページ 2012年10月25日 木曜日 午後9時9分
■ Active Head Restraints
uuAdjusting the SeatsuAdjusting the Seat Positions
The driver’s and passenger’s seats have active head restraints. In a rear impact, an occupant properly secured by a seat belt will be pushed against the seat-back and the head restraint will move forward. This reduces the distance between the restraint and the occupant’s head, which helps reduce the likelihood of whiplash and injuries to the neck and upper spine.
1Active Head Restraints
In order for the active head restraints to operate properly: • Do not hang any items on the head restraints, or
from the restraint legs.
• Do not place any objects between an occupant and
the seat-back.
• Install each restraint in its proper location.
After collision, the activated restraint should return to its normal position. If the restraint does not return to its normal position, or in the event of a severe collision, have the vehicle inspected by a dealer.
QRG
TOC
Index
Home
125
2013 CR-Z13 CR-Z-31SZT6200.book 126 ページ 2012年10月25日 木曜日 午後9時9分
Interior Lights/Interior Convenience Items