Download PDF Manual


VSA® OFF Indicator


Models with LDW


TOC


VSA® OFF Indicator


Index


Home


236


* Not available on all models


This button is on the driver side control panel. To turn the VSA® system on and off, press and hold it until you hear a beep.


VSA® will stop and the indicator will come on.


To turn it on again, press the button until you hear a beep.


(VSA® OFF)


VSA® is turned on every time you start the engine, even if you turned it off the last time you drove the vehicle.


1Vehicle Stability Assist (VSA®), aka Electronic Stability Control


(ESC), System Without VSA®, your vehicle will have normal braking and cornering ability, but it will not have VSA® traction and stability enhancement.


In certain unusual conditions when your vehicle gets stuck in shallow mud or fresh snow, it may be easier to free it with the VSA® temporarily switched off.


When the VSA® system is off, the traction control system is also off. You should only attempt to free your vehicle with the VSA® off if you are not able to free it when the VSA® is on.


Immediately after freeing your vehicle, be sure to switch VSA® on again. We do not recommend driving your vehicle with the VSA® and traction control systems switched off.


If the low tire pressure/TPMS indicator *, comes on or blinks, the VSA® system comes on automatically. In this case, you cannot turn the system off by pressing the


button.


You may hear a motor sound coming from the engine compartment while system checks are being performed immediately after starting the engine or while driving. This is normal.


13 CIVIC HYBRID-31TR26100.book 237 ページ 2012年12月18日 火曜日 午後2時59分


uuWhen DrivinguTire Pressure Monitoring System (TPMS)


U.S. models only Tire Pressure Monitoring System (TPMS)


Monitors the tire pressure while you are driving. If your vehicle’s tire pressure becomes significantly low, the low tire pressure/TPMS indicator comes on and a message appears on the intelligent multi-information display.


CHECK TIRE PRESSURE is displayed when a tire has significantly low pressure.


1Tire Pressure Monitoring System (TPMS)


Conditions such as low ambient temperature and altitude change directly affect tire pressure and can trigger the low tire pressure/TPMS indicator to come on.


2 If the Low Tire Pressure/TPMS Indicator


Comes On or Blinks P. 320


Tire pressure checked and inflated in: • Warm weather can become under-inflated in


colder weather.


• Cold weather can become over-inflated in warmer


weather.


The low tire pressure/TPMS indicator will not come on as a result of over inflation.


QRG


TOC


Index


Home


237


13 CIVIC HYBRID-31TR26100.book 238 ページ 2012年12月18日 火曜日 午後2時59分


uuWhen DrivinguTire Pressure Monitoring System (TPMS) - Required Federal Explanation


QRG


U.S. models Tire Pressure Monitoring System (TPMS) - Required Federal Explanation Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label.


(If your vehicle has tires of a different size than the size indicated on the vehicle on the vehicle placard or tire inflation pressure label, you should determine the proper tire inflation pressure for those tires.)


As an added safety feature, your vehicle has been equipped with a tire pressure monitoring system (TPMS) that illuminates a low tire pressure telltale when one or more of your tires is significantly under-inflated.


Accordingly, when the low tire pressure telltale illuminates, you should stop and check your tires as soon as possible, and inflate them to the proper pressure.


Driving on a significantly under-in flated tire causes the tire to overheat and can lead to tire failure. Under-inflation also reduces fuel efficiency and tire tread life, and may affect the vehicle’s handling and stopping ability.


TOC


Index


Home


238


13 CIVIC HYBRID-31TR26100.book 239 ページ 2012年12月18日 火曜日 午後2時59分


uuWhen DrivinguTire Pressure Monitoring System (TPMS) - Required Federal Explanation


Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver’s responsibility to maintain correct tire pressure, even if un der-inflation has not reached the level to trigger illumination of the TPMS low tire pressure telltale.


Your vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly. The TPMS malfunction indicator is combined with the low tire pressure telltale. When the system detects a malfunction, the telltale will flash for approximately one minute and then remain continuously illuminated. This sequence will continue upon subsequent vehicle start-ups as long as the malfunction exists.


When the malfunction indicator is illuminated, the system may not be able to detect or signal low tire pressure as intended.


TPMS malfunctions may occur for a variety of reasons, including the installation of replacement or alternate tires or wheels on the vehicle that prevent the TPMS from functioning properly.


Always check the TPMS malfunction telltale after replacing one or more tires or wheels on your vehicle to ensure that the replacement or alternate tires and wheels allow the TPMS to continue to function properly.


QRG


TOC


Index


Home


239


13 CIVIC HYBRID-31TR26100.book 240 ページ 2012年12月18日 火曜日 午後2時59分


Braking


QRG


Brake System ■ Parking Brake Use the parking brake to keep the vehicle stationary when parking.


To apply: Pull the lever fully up without pressing the release button.


1Parking Brake


NOTICE Release the parking brake fully before driving. The rear brakes and axle can be damaged if you drive with the parking brake applied.


If you start driving without fully releasing the parking brake, a buzzer sounds as a warning, and RELEASE PARKING BRAKE appears on the intelligent multi- information display.


Always apply the parking brake when parking.


To release: 1. Pull the lever slightly, and press and hold


the release button.


2. Lower the lever down all the way, then


release the button.


TOC


Index


Home


240


13 CIVIC HYBRID-31TR26100.book 241 ページ 2012年12月18日 火曜日 午後2時59分


■ Foot Brake Your vehicle is equipped with front disc brakes. The brakes on the rear wheels are drum. A vacuum power assist helps reduce the effort needed on the brake pedal. The brake assist system increases the stopping force when you depress the brake pedal hard in an emergency situation. The anti-lock brake system (ABS) helps you retain steering control when braking very hard.


2 Brake Assist System P. 243
2 Anti-lock Brake System (ABS) P. 242


uuBrakinguBrake System


1Foot Brake


Check the brakes after driving through deep water, or if there is a buildup of road surface water. If necessary, dry the brakes by lightly depressing the pedal several times.


If you hear a continuous metallic friction sound when applying the brakes, the brake pads need to be replaced. Have the vehicle checked by a dealer.


Constantly using the brake pedal while going down a long hill builds up heat, which reduces the brake effectiveness. Apply engine braking by taking your foot off the accelerator pedal and downshifting to a lower speed position.


Do not rest your foot on the brake pedal while driving, as it will lightly apply the brakes and cause them to lose effectiveness over time and reduce pad life. It will also confuse drivers behind you.


QRG


TOC


Index


Home


241


13 CIVIC HYBRID-31TR26100.book 242 ページ 2012年12月18日 火曜日 午後2時59分


uuBrakinguAnti-lock Brake System (ABS)


QRG


Anti-lock Brake System (ABS) ■ ABS Helps prevent the wheels from locking up, and helps you retain steering control by pumping the brakes rapidly, much faster than you.


The electronic brake distribution (EBD) system, which is part of the ABS, also balances the front-to-rear braking distribution according to vehicle loading.


You should never pump the brake pedal. Let the ABS work for you by always keeping firm, steady pressure on the brake pedal. This is sometimes referred to as “stomp and steer.”


■ ABS operation The brake pedal may pulsate slightly when the ABS is working. Keep holding the pedal firmly down. On dry pavement, you will need to press on the brake pedal very hard before the ABS activates. However, you may feel the ABS activate immediately if you are trying to stop on snow or ice.


When the vehicle speed goes under 6 mph (10 km/h), the ABS stops.


TOC


Index


Home


242


1Anti-lock Brake System (ABS)


NOTICE The ABS may not function correctly if you use an incorrect tire type and size.


When the ABS indicator comes on while driving, there may be a problem with the system. While normal braking is not affected, there is a possibility of the ABS not operating. Have the vehicle checked by a dealer immediately.


The ABS does not reduce the time or distance it takes to stop the vehicle. It only helps with steering control during hard braking.


In the following cases, your vehicle may need more stopping distance than a vehicle without the ABS: • When driving on rough road surfaces, including


when driving on uneven surfaces, such as gravel or snow.


• When tire chains are installed.


You may hear a motor sound coming from the engine compartment while system checks are being performed immediately after starting the engine or while driving. This is normal.


13 CIVIC HYBRID-31TR26100.book 243 ページ 2012年12月18日 火曜日 午後2時59分


Brake Assist System ■ Brake Assist System Designed to assist the driver by generating greater braking force when you depress the brake pedal hard during emergency braking.


■ Brake assist system operation Press the brake pedal firmly for more powerful braking.


When brake assist operates, the pedal may wiggle slightly and an operating noise may be heard. This is normal. Keep holding the brake pedal firmly down.


uuBrakinguBrake Assist System


QRG


TOC


Index


Home


243


13 CIVIC HYBRID-31TR26100.book 244 ページ 2012年12月18日 火曜日 午後2時59分


Parking Your Vehicle


QRG


When Stopped 1. Depress the brake pedal firmly.


2. Firmly apply the parking brake.


3. Move the shift lever from (D to (P.


4. Turn off the engine.


Always set the parking brake firmly, in particular if you are parked on an incline.


TOC


Index


Home


244


1Parking Your Vehicle


Do not park your vehicle near flammable objects, such as dry grass, oil, or timber. Heat from the exhaust can cause a fire.


1When Stopped


NOTICE The following can damage the transmission: • Depressing the accelerator and brake pedals


simultaneously.


• Holding the vehicle in place when facing uphill by


depressing the accelerator pedal.


• Moving the shift lever into (P before the vehicle


stops completely.


Raise the wiper arms when snow is expected.


13 CIVIC HYBRID-31TR26100.book 245 ページ 2012年12月18日 火曜日 午後2時59分


Rearview Camera


About Your Rearview Camera Models with navigation system See the Navigation System Manual for the rearview camera.


Models without navigation system The intelligent multi-information display can display your vehicle’s rear view. The display automatically changes to a rear view when the shift lever is moved to (R.


■ Rearview Camera Display Area


Approx. 118 in (3 m)


Approx. 79 in (2 m) Approx. 39 in (1 m)


Guidelines


Bumper


Camera Approx. 20 in (0.5 m) Approx. 39 in (1 m)


Approx. 79 in (2 m)


Approx. 118 in (3 m)


The rearview camera has a unique lens that makes objects appear closer or further than they actually are.


1About Your Rearview Camera


The rear camera view is restricted. You cannot see the corner ends of the bumper or what is underneath the bumper. Its unique lens also makes objects appear closer or farther than they actually are.


Visually confirm that it is safe to drive before backing up. Certain conditions (such as weather, lighting, and high temperatures) may also restrict the rear view. Do not rely on the rearview display which does not give you all information about conditions at the back of your vehicle.


If the camera lens is covered with dirt or moisture, use a soft, moist cloth to keep the lens clean and free of debris.


QRG


TOC


Index


Home


245


13 CIVIC HYBRID-31TR26100.book 246 ページ 2012年12月18日 火曜日 午後2時59分


Refueling


QRG


Fuel Information ■ Fuel recommendation Unleaded gasoline, pump octane number 87 or higher Use of a lower octane gasoline can cause a persistent, heavy metallic knocking noise that can lead to engine damage.


■ Top tier detergent gasoline Because the level of detergency and additives in gasoline vary in the market, Honda endorses the use of “TOP TIER Detergent Gasoline” where available to help maintain the performance and reliability of your vehicle. TOP TIER Detergent Gasoline meets a new gasoline standard jointly established by leading automotive manufacturers to meet the needs of today’s advanced engines.


TOC


Index


Home


246


1Fuel Information


NOTICE We recommend quality gasoline containing detergent additives that help prevent fuel system and engine deposits. In addition, in order to maintain good performance, fuel economy, and emissions control, we strongly recommend the use of gasoline that does NOT contain harmful manganese-based fuel additives such as MMT, if such gasoline is available.


Use of gasoline with these additives may adversely affect performance, and cause the malfunction indicator lamp on your instrument panel to come on. If this happens, contact a dealer for service. Some gasoline today is blended with oxygenates such as ethanol. Your vehicle is designed to operate on oxygenated gasoline containing up to 10% ethanol by volume. Do not use gasoline containing methanol. If you notice any undesirable operating symptoms, try another service station or switch to another brand of gasoline.


13 CIVIC HYBRID-31TR26100.book 247 ページ 2012年12月18日 火曜日 午後2時59分


uuRefuelinguHow to Refuel


Qualifying gasoline retailers will, in most cases, identify their gasoline as having met “TOP TIER Detergent Gasoline” standards at the retail location. This fuel is guaranteed to contain the proper level of detergent additives and be free of metallic additives. The proper level of detergent additives, and absence of harmful metallic additives in gasoline, help avoid build-up of deposits in your engine and emission control system.


For further important fuel-related information for your vehicle, or on information on gasoline that does not contain MMT, visit www.hondacars.com. In Canada, visit www.honda.ca for additional information on gasoline. For more information on top tier gasoline, visit www.toptiergas.com.


■ Fuel tank capacity: 13.2 US gal (50 liters)


How to Refuel


Push


1. Stop your vehicle with the service


station pump on the left side of the vehicle in the rear.


2. Turn off the engine.


3. Push on the fuel fill door release handle at


the foot of the driver’s seat. u The fuel fill door opens.


1How to Refuel


3WARNING


Gasoline is highly flammable and explosive. You can be burned or seriously injured when handling fuel.


• Stop the engine, and keep heat, sparks,


and flame away.


• Handle fuel only outdoors. • Wipe up spills immediately.


Continued


QRG


TOC


Index


Home


247


13 CIVIC HYBRID-31TR26100.book 248 ページ 2012年12月18日 火曜日 午後2時59分


uuRefuelinguHow to Refuel


QRG


1How to Refuel


The filler nozzle automatically stops to leave space in the fuel tank so that fuel does not overflow as a result of changes in air temperature.


If the fuel nozzle keeps turning off when the tank is not full, there may be a problem with the pump’s fuel vapor recovery system. Try filling at another pump. If this does not fix the problem, consult a dealer.


Do not continue to add fuel after the nozzle has automatically stopped. Additional fuel can exceed the full tank capacity.


4. Remove the fuel fill cap slowly. If you hear a release of air, wait until this stops, then turn the knob slowly to open the fuel fill cap.


Cap


Cap


5. Place the fuel fill cap in the holder.


6. Insert the filler nozzle fully.


u When the tank is full, the fuel nozzle will click off automatically. This leaves space in the fuel tank in case the fuel expands with a change in the temperature.


7. After filling, replace the fuel fill cap, tightening it until you hear it click at least once. u Shut the fuel fill door by hand.


TOC


Holder


Index


Home


248


13 CIVIC HYBRID-31TR26100.book 249 ページ 2012年12月18日 火曜日 午後2時59分


Fuel Economy


Improving Fuel Economy Fuel economy depends on several conditions, including driving conditions, your driving habits, the condition of your vehicle, and loading. Depending on these and other conditions, you may or may not achieve the rated fuel economy of this vehicle.


■ Maintenance and Fuel Economy You can optimize your fuel economy with proper maintenance of your vehicle. Always maintain your vehicle in accordance with the messages displayed on the intelligent multi-information display. • Use the recommended viscosity engine oil, displaying the API Certification Seal.


• Maintain the specified tire pressure.


• Do not load the vehicle with excess cargo.


• Keep your vehicle clean. A buildup of snow or mud on your vehicle’s underside


adds weight and increases wind resistance.


1Improving Fuel Economy


Direct calculation is the recommended method to determine actual fuel consumed while driving.


Miles driven


Gallons of


fuel


Miles per


Gallon


100


Liters


Kilometers


L per 100 km


In Canada, posted fuel economy numbers are established following a simulated test. For more information on how this test is performed, please visit http://oee.nrcan.gc.ca/


QRG


TOC


Index


Home


249


13 CIVIC HYBRID-31TR26100.book 250 ページ 2012年12月18日 火曜日 午後2時59分


Accessories and Modifications


QRG


Accessories When installing accessories, check the following: • Do not install accessories on the windshield. They can obstruct your view and


delay your reaction to driving conditions.


• Do not install accessories on the side pillars or across the side windows.


Accessories installed in these areas may interfere with proper operation of the side curtain airbags.


• Be sure electronic accessories do not overload electrical circuits or interfere with


proper operation of your vehicle.


2 Fuses P. 321


• Before installing any electronic accessory, have the installer contact a dealer for


assistance. If possible, have a dealer inspect the final installation.


TOC


Modifications Do not modify your vehicle or use non-Honda components that can affect its handling, stability, and reliability.


Overall vehicle performance can be affected. Always make sure all equipment is properly installed and maintained, and that it meets federal, state, province, territory, and local regulations.


1Accessories and Modifications


3WARNING


Improper accessories or modifications can affect your vehicle’s handling, stability, and performance, and cause a crash in which you can be seriously hurt or killed.


Follow all instructions in this owner’s manual regarding accessories and modifications.


Honda Genuine accessories are recommended to ensure proper operation on your vehicle.


Index


Home


250


13 CIVIC HYBRID-31TR26100.book 251 ページ 2012年12月18日 火曜日 午後2時59分


Maintenance


QRG


This chapter discusses basic maintenance.


Before Performing Maintenance


Inspection and Maintenance ............ 252
Safety When Performing Maintenance.... 253
Parts and Fluids Used in Maintenance Service ........................................... 254
Maintenance MinderTM..................... 255
Maintenance Under the Hood


Maintenance Items Under the Hood..... 259
Opening the Hood ........................... 260
Recommended Engine Oil ................ 261
Oil Check......................................... 262
Adding Engine Oil............................ 263
Changing the Engine Oil and Oil Filter.. 264


Engine Coolant ................................ 266
Transmission Fluid............................ 268
Brake Fluid....................................... 269
Refilling Window Washer Fluid......... 270
Replacing Light Bulbs ....................... 271
Checking and Maintaining Wiper Blades .......................................... 277
Checking and Maintaining Tires


Checking Tires ................................. 279
Tire and Loading Information Label .. 280
Tire Labeling .................................... 280
DOT Tire Quality Grading (U.S. Vehicles) .. 282
Wear Indicators................................ 284


Tire Service Life................................ 284
Tire and Wheel Replacement ........... 285
Tire Rotation.................................... 286
Winter Tires ..................................... 287
12 Volt Battery.................................. 288
Remote Transmitter Care


Replacing the Button Battery ........... 289
Climate Control System Maintenance......290
Cleaning


Interior Care .................................... 291
Exterior Care.................................... 293


Index


Home


251


13 CIVIC HYBRID-31TR26100.book 252 ページ 2012年12月18日 火曜日 午後2時59分


Before Performing Maintenance


QRG


Inspection and Maintenance For your safety, perform all listed inspections and maintenance to keep your vehicle in good condition. If you become aware of any abnormality (noise, smell, insufficient brake fluid, oil residue on the ground, etc.), have your vehicle inspected by a dealer. (Note, however, that service at a dealer is not mandatory to keep your warranties in effect.) Refer to the separate maintenance booklet for detailed maintenance and inspection information.


■ Types of Inspection and Maintenance ■ Daily inspections Perform inspections before long distance trips, when washing the vehicle, or when refueling.


■ Periodic inspections • Check the continuously variable transmission fluid level monthly.


2 Continuously Variable Transmission (CVT) Fluid P. 268


• Check the brake fluid level monthly. 2 Checking the Brake Fluid P. 269


• Check the tire pressure monthly. Examine the tread for wear and foreign objects.


2 Checking and Maintaining Tires P. 279


• Check the operation of the exterior lights monthly.


2 Replacing Light Bulbs P. 271


• Check the condition of the wiper blades at least every six months.


2 Checking and Maintaining Wiper Blades P. 277


TOC


Index


Home


252


1Inspection and Maintenance


U.S. models Maintenance, replacement, or repair of emissions control devices and systems may be done by any automotive repair establishment or individuals using parts that are “certified” to EPA standards.


According to state and federal regulations, failure to perform maintenance on the maintenance main items marked with # will not void your emissions warranties. However, all maintenance services should be performed in accordance with the intervals indicated by the intelligent multi-information display.


2 Maintenance Service Items P. 257


If you want to perform complex maintenance tasks that require more skills and tools, you can purchase a subscription to the Service Express website at www.techinfo.honda.com.


2 Authorized Manuals P. 335


If you want to perform maintenance yourself, make sure that you have the necessary tools and skills first. After performing maintenance, update the records in the separate maintenance booklet.


13 CIVIC HYBRID-31TR26100.book 253 ページ 2012年12月18日 火曜日 午後2時59分


uuBefore Performing MaintenanceuSafety When Performing Maintenance


Safety When Performing Maintenance Some of the most important safety precautions are given here. However, we cannot warn you of every conceivable hazard that can arise in performing maintenance. Only you can decide whether or not you should perform a given task.


■ Maintenance Safety • To reduce the possibility of fire or explosion, keep cigarettes, sparks, and flames


away from the battery and all fuel related parts.


• Never leave rags, towels, or other flammable objects under the hood.


u Heat from the engine and exhaust can ignite them causing a fire.


• To clean parts, use a commercially available degreaser or parts cleaner,


not gasoline.


• Wear eye protection and protective clothing when working with the 12 volt


battery or compressed air.


• Engine exhaust contains carbon monoxide, which is poisonous and can kill you.


u Only operate the engine if there is sufficient ventilation.


■ Vehicle Safety • The vehicle must be in a stationary condition.


u Make sure your vehicle is parked on level ground, the parking brake is set, and


the engine is off.


• Be aware that hot parts can burn you.


u Make sure to let the engine and exhaust system cool thoroughly before


touching vehicle parts.


• Be aware that moving parts can injure you.


u Do not start the engine unless instructed, and keep your hands and limbs away


from moving parts.


• Do not touch the IMA battery and wiring (orange).


1Safety When Performing Maintenance


3WARNING


Improperly maintaining this vehicle or failing to correct a problem before driving can cause a crash in which you can be seriously hurt or killed.


Always follow the inspection and maintenance recommendations according to the schedules in this owner’s manual.


3WARNING


Failure to properly follow maintenance instructions and precautions can cause you to be seriously hurt or killed.


Always follow the procedures and precautions in this owner’s manual.


QRG


TOC


Index


Home


253


13 CIVIC HYBRID-31TR26100.book 254 ページ 2012年12月18日 火曜日 午後2時59分


uuBefore Performing MaintenanceuParts and Fluids Used in Maintenance Service


QRG


Parts and Fluids Used in Maintenance Service The use of Honda genuine parts and fluids is recommended when maintaining and servicing your vehicle. Honda genuine parts are manufactured according to the same high quality standards used in Honda vehicles.


TOC


Index


Home


254


13 CIVIC HYBRID-31TR26100.book 255 ページ 2012年12月18日 火曜日 午後2時59分


Maintenance MinderTM


If the engine oil life is less than 15%, you will see the Maintenance Minder messages appear on the intelligent multi-information display every time you turn the ignition switch to ON (w. The messages notify you when to change the engine oil, or when to bring your vehicle to a dealer for indicated maintenance services.


To Use Maintenance MinderTM ■ Displaying the Engine Oil Life and Maintenance Items Maintenance items, which should be serviced at the same time that you replace the engine oil, appear on the intelligent multi-information display. You can view them on the Maintenance info screen at any time. 1. Turn the ignition switch to ON (w. 2. Press the MENU button to go to the Vehicle Menu screen. 3. Select Vehicle Information with the (+ button, then press the SOURCE button. 4. Press the SOURCE button again to go to the Maintenance info screen. The


engine oil life appears on the intelligent multi-information display.


(+ Button


SOURCE Button MENU Button


Engine Oil Life


Main Item


Sub Item


Continued


QRG


TOC


Index


Home


255


1Displaying the Engine Oil Life and Maintenance Items


Based on the engine operating conditions, the remaining engine oil life is calculated and displayed as a percentage.


Displayed Engine Oil


Calculated Engine Oil


Life (%)


100
90
80
70
60
50
40
30
20
15
10


Life (%) 100 to 91
90 to 81
80 to 71
70 to 61
60 to 51
50 to 41
40 to 31
30 to 21
20 to 16
15 to 11
10 to 6
5 to 1


There is a list of maintenance main and sub items you can view on the intelligent multi-information display.


2 Maintenance Service Items P. 257


13 CIVIC HYBRID-31TR26100.book 256 ページ 2012年12月18日 火曜日 午後2時59分


uuMaintenance MinderTMuTo Use Maintenance MinderTM


■ Maintenance Minder Messages on the Intelligent Multi-Information Display


Maintenance Message


Oil Life Display


Explanation


Information


SERVICE DUE SOON


15%


2345


Engine oil


Air filters


SERVICE DUE NOW


5%


2345
15


2345


2345


Engine oil


Air filters


SERVICE PAST DUE


Negative Distance


2345


-30
2345


The remaining engine oil life is 15 to 6 percent. Once you switch the display by pressing the (display/information) button, this message will go off.


The engine oil is approaching the end of its service life, and the maintenance items should be inspected and serviced soon.


The remaining engine oil life is 5 to 1 percent. Press the switch to another display.


button to


The engine oil has almost reached the end of its service life, and the maintenance items should be inspected and serviced as soon as possible.


The remaining engine oil life has passed its service life, and a negative distance appears after driving over 10 miles (U.S. models) or 10 km


(Canadian models). Press the button to switch to another display.


The engine oil life has passed. The maintenance items must be inspected and serviced immediately.


The system message indicator (


) comes on along with the Maintenance Minder message.


QRG


TOC


Index


Home


256


13 CIVIC HYBRID-31TR26100.book 257 ページ 2012年12月18日 火曜日 午後2時59分


uuMaintenance MinderTMuTo Use Maintenance MinderTM


■ Maintenance Service Items


System Message Indicator


Maintenance Minder Message


1Maintenance Service Items


• Independent of the Maintenance Minder


information, replace the brake fluid every 3 years. • Inspect idle speed every 160,000 miles (256,000


km).


• Adjust the valves during services A, B, 1, 2, or 3 if


they are noisy.


Main Item


Sub Items


CODE


Maintenance Main Items


CODE


Maintenance Sub Items


● Replace engine oil*1
● Replace engine oil*1 and oil filter ● Inspect front and rear brakes/service as necessary ● Check parking brake adjustment ● Inspect tie rod ends, steering gearbox, and boots ● Inspect suspension components ● Inspect driveshaft boots ● Inspect brake hoses and lines (Including ABS/VSA) ● Inspect all fluid levels and condition of fluids ● Inspect exhaust system# ● Inspect fuel lines and connections# ● Check the expiration date for TRK bottle


● Rotate tires ● Replace air cleaner element*2
● Replace dust and pollen filter*3
● Inspect drive belt ● Replace transmission fluid ● Replace spark plugs ● Inspect valve clearance ● Replace engine coolant


*2: *3:


# :


If you drive in dusty conditions, replace the air cleaner element every 15,000 miles (24,000 km). If you drive primarily in urban areas that have high concentrations of soot in the air from industry and from diesel-powered vehicles, replace the dust and pollen filter every 15,000 miles (24,000 km). See information on maintenance and emissions warranty.


*1:


If a message SERVICE does not appear more than 12 months after the display is reset, change the engine oil every year.


Continued


QRG


TOC


Index


Home


257


13 CIVIC HYBRID-31TR26100.book 258 ページ 2012年12月18日 火曜日 午後2時59分


uuMaintenance MinderTMuTo Use Maintenance MinderTM


QRG


TOC


Index


Home


258


■ Resetting the Display Reset the engine oil life display if you have performed the maintenance service.


Maintenance Item Codes


Engine Oil Life


1Resetting the Display


NOTICE Failure to reset the engine oil life after a maintenance service results in the system showing incorrect maintenance intervals, which can lead to serious mechanical problems.


The dealer will reset the engine oil life display after completing the required maintenance service. If someone other than a dealer performs maintenance service, reset the engine oil life display yourself.


SOURCE Button


(- Button


1. Turn the ignition switch to ON (w. 2. Go to the Maintenance info screen.


2 Displaying the Engine Oil Life and Maintenance Items P. 255


3. Press the SOURCE button.


u The oil life reset mode is displayed on the intelligent multi-information display.


4. Select YES with the (- button, then press the SOURCE button.


u The displayed maintenance items disappear, and the engine oil life display


returns to 100%.


u Any maintenance items that are necessary for your vehicle at the next


maintenance service will appear.


To cancel the oil life reset mode, select No, then press the SOURCE button.


13 CIVIC HYBRID-31TR26100.book 259 ページ 2012年12月18日 火曜日 午後2時59分


Maintenance Under the Hood


Maintenance Items Under the Hood


Engine Oil Dipstick (Orange Loop)


Engine Oil Fill Cap


Washer Fluid (Blue Cap)


Brake Fluid (Black Cap)


Automatic Transmission (CVT) Fluid Dipstick (Yellow Loop)


12 Volt Battery


Radiator Cap


Engine Coolant Reservoir


QRG


TOC


Index


Home


259


13 CIVIC HYBRID-31TR26100.book 260 ページ 2012年12月18日 火曜日 午後2時59分


uuMaintenance Under the HooduOpening the Hood


QRG


Opening the Hood


Hood Release Handle


Pull


1. Park the vehicle on a level surface, and set


1Opening the Hood


the parking brake.


2. Pull the hood release handle under the


lower left corner of the dashboard. u The hood will pop up slightly.


NOTICE Do not open the hood when the wiper arms are raised. The hood will strike the wipers, and may damage either the hood or the wipers.


When closing the hood, check that the hood is securely latched.


3. Push up the hood latch lever in the center of the hood to release the lock mechanism, and open the hood.


If the hood latch lever moves stiffly, or if you can open the hood without lifting the lever, the latch mechanism should be cleaned and lubricated.


Do not open the hood while the Auto Idle Stop function is activated.


Lever


Support Rod Grip


Clamp


TOC


Index


Home


260


4. Remove the support rod from the clamp using the grip. Mount the support rod in the hood.


When closing, remove the support rod, and stow it in the clamp, then gently lower the hood. Remove your hand at a height of approximately 12 inches (30 cm) and let the hood close.


13 CIVIC HYBRID-31TR26100.book 261 ページ 2012年12月18日 火曜日 午後2時59分


uuMaintenance Under the HooduRecommended Engine Oil


1Recommended Engine Oil


Engine Oil Additives Your vehicle does not require oil additives. In fact, they may adversely affect the engine performance and durability.


Recommended Engine Oil


• Genuine Honda Motor Oil • Premium-grade 0W-20 detergent oil with an API Certification Seal on the


container.


Oil is a major contributor to your engine’s performance and longevity. If you drive the vehicle with insufficient or deteriorated oil, the engine may fail or be damaged.


This seal indicates the oil is energy conserving and that it meets the American Petroleum Institute’s latest requirements.


Use a Genuine Honda Motor Oil or another commercial engine oil of suitable viscosity for the ambient temperature as shown.


Ambient Temperature


■ Synthetic oil You may also use synthetic motor oil if it is labeled with the API Certification Seal and is the specified viscosity grade.


QRG


TOC


Index


Home


261


13 CIVIC HYBRID-31TR26100.book 262 ページ 2012年12月18日 火曜日 午後2時59分


uuMaintenance Under the HooduOil Check


QRG


Oil Check We recommend that you check the engine oil level every time you refuel. Park the vehicle on level ground. Wait approximately three minutes after turning the engine off before you check the oil.


1Oil Check


If the oil level is near or below the lower mark, slowly add oil being careful not to overfill.


1. Remove the dipstick (orange loop).


2. Wipe the dipstick with a clean cloth or


paper towel.


3. Insert the dipstick back all the way into


its hole.


4. Remove the dipstick again, and check the level. It should be between the upper and lower marks. Add oil if necessary.


Upper Mark Lower Mark


TOC


Index


Home


262


13 CIVIC HYBRID-31TR26100.book 263 ページ 2012年12月18日 火曜日 午後2時59分


uuMaintenance Under the HooduAdding Engine Oil


Adding Engine Oil


1. Unscrew and remove the engine oil fill cap.


1Adding Engine Oil


2. Add oil slowly.


3. Reinstall the engine oil fill cap, and tighten


it securely.


4. Wait for three minutes and recheck the


engine oil dipstick.


If any oil spills, wipe it up immediately. Spilled oil may damage the engine compartment components.


NOTICE Do not fill the engine oil above the upper mark. Overfilling the engine oil can result in leaks and engine damage.


Engine Oil Fill Cap


QRG


TOC


Index


Home


263


1Changing the Engine Oil and Oil Filter


NOTICE You may damage the environment if you do not dispose of the oil in a suitable way. If you are changing the oil by yourself, appropriately dispose of the used oil. Put the oil in a sealed container and take it to a recycling center. Do not throw the oil away into a garbage can or onto the ground.


13 CIVIC HYBRID-31TR26100.book 264 ページ 2012年12月18日 火曜日 午後2時59分


uuMaintenance Under the HooduChanging the Engine Oil and Oil Filter


QRG


Changing the Engine Oil and Oil Filter You must change the engine oil and oil filter regularly in order to maintain the engine’s lubrication. The engine may be damaged if they are not changed regularly.


Change the oil and filter in accordance with the maintenance message on the intelligent multi-information display.


1. Run the engine until it reaches normal


operating temperature, and then turn the engine off.


2. Open the hood and remove the engine oil


fill cap.


3. Remove the bolts on the undercarriage


and slide the under cover backward, then remove.


4. Remove the drain bolt and washer from the bottom of the engine, and drain the oil into a suitable container.


Under Cover


Drain Bolt


Bolt


Washer


TOC


Index


Home


264


13 CIVIC HYBRID-31TR26100.book 265 ページ 2012年12月18日 火曜日 午後2時59分


uuMaintenance Under the HooduChanging the Engine Oil and Oil Filter


5. Remove the oil filter and dispose of the


1Changing the Engine Oil and Oil Filter


You will need a special wrench to replace the oil filter. You can buy this wrench from a dealer.


When installing the new oil filter, follow the instructions supplied with the oil filter.


Reinstall the engine oil fill cap. Start the engine. The low oil pressure indicator should go off within five seconds. If it does not, turn off the engine, and check your work.


Oil Filter


remaining oil.


6. Check that the filter gasket is not stuck to


the engine contact surface. u If it is stuck, you must detach it.


7. Wipe away dirt and dust adhering to the contact surface of the engine block, and install a new oil filter. u Apply a light coat of new engine oil to


the filter gasket.


8. Put a new washer on the drain bolt, then


reinstall the drain bolt. u Tightening torque:


29 lbf∙ft (39 N∙m, 4.0 kgf∙m)


9. Pour the recommended engine oil into


the engine. u Engine oil change capacity (including


filter): 3.8 US qt (3.6 L)


10. Reinstall the engine oil fill cap securely and


start the engine.


11. Run the engine for a few minutes, and


then check that there is no leak from the drain bolt or oil filter.


12. Stop the engine, wait for three minutes,


and then check the oil level on the dipstick. u If necessary, add more engine oil.


QRG


TOC


Index


Home


265


13 CIVIC HYBRID-31TR26100.book 266 ページ 2012年12月18日 火曜日 午後2時59分


uuMaintenance Under the HooduEngine Coolant


QRG


Engine Coolant


Specified coolant: Honda Long Life Antifreeze/Coolant Type 2


1Engine Coolant


NOTICE If temperatures consistently below −22°F (−30°C) are expected, the coolant mixture should be changed to a higher concentration. Consult a dealer for more information.


If Honda antifreeze/coolant is not available, you may use another major brand non-silicate coolant as a temporary replacement. Check that it is a high quality coolant recommended for aluminum engines. Continued use of any non-Honda coolant can result in corrosion, causing the cooling system to malfunction or fail. Have the cooling system flushed and refilled with Honda antifreeze/coolant as soon as possible.


Do not add rust inhibitors or other additives to your vehicle’s coolant system. They may not be compatible with the coolant or with the engine components.


This coolant is premixed with 50% antifreeze and 50% water. Do not add any straight antifreeze or water.


We recommend you check the engine coolant level every time you refuel. Check the reserve tank first. If it is completely empty, also check the coolant level in the radiator. Add the engine coolant accordingly.


■ Reserve Tank


MAX


Reserve Tank


1. Check the amount of coolant in


the reserve tank.


MIN


TOC


Index


Home


266


2. If the coolant level is below the MIN mark,


add the specified coolant until it reaches the MAX mark.


3. Inspect the cooling system for leaks.


13 CIVIC HYBRID-31TR26100.book 267 ページ 2012年12月18日 火曜日 午後2時59分


■ Radiator


Radiator Cap


uuMaintenance Under the HooduEngine Coolant


1Radiator


3WARNING


Removing the radiator cap while the engine is hot can cause the coolant to spray out, seriously scalding you.


Always let the engine and radiator cool down before removing the radiator cap.


NOTICE Pour the fluid slowly and carefully so you do not spill any. Clean up any spills immediately; they can damage components in the engine compartment.


1. Make sure the engine and


radiator are cool.


2. Turn the radiator cap counterclockwise and relieve any pressure in the cooling system. Do not push the cap down when turning.


3. Push down and turn the radiator cap


counterclockwise to remove it.


4. The coolant level should be up to the base


of the filler neck. Add coolant if it is low.


5 . Put the radiator cap back on, and


tighten it fully.


6. Pour coolant into the reserve tank until it reaches the MAX mark. Put the cap back on the reserve tank.


QRG


TOC


Index


Home


267


13 CIVIC HYBRID-31TR26100.book 268 ページ 2012年12月18日 火曜日 午後2時59分


uuMaintenance Under the HooduTransmission Fluid


QRG


Transmission Fluid ■ Continuously Variable Transmission (CVT) Fluid


Specified fluid: Honda CVTF (continuously variable transmission fluid)


Check the fluid level when the engine is at normal operating temperature.


1. Park on level ground, and start the engine.


2. Wait until the radiator fan starts and then


turn off the engine. u Perform step 3 after waiting for about 60


seconds (less than 90 seconds).


HOT Range


Upper Mark Lower Mark


3. Remove the dipstick (yellow loop) from the transmission and wipe it with a clean cloth.


4. Insert the dipstick all the way back into the transmission securely, as shown in the image.


5. Remove the dipstick and check the fluid


level. u It should be between the upper and


lower marks in the HOT range.


6. If the level is below the lower mark,


add fluid into the dipstick hole to bring it to the level between the upper and lower marks, and have your vehicle checked by a dealer immediately.


TOC


Index


Home


268


1Continuously Variable Transmission (CVT) Fluid


NOTICE Do not mix Honda CVTF with other transmission fluids. Using a transmission fluid other than Honda CVTF may adversely affect the operation and durability of your vehicle’s transmission, and damage the transmission. Any damage caused by using a transmission fluid that is not equivalent to Honda CVTF is not covered by Honda’s new vehicle warranty.


NOTICE Pour the fluid slowly and carefully so you do not spill any. Clean up any spills immediately; they can damage components in the engine compartment.


13 CIVIC HYBRID-31TR26100.book 269 ページ 2012年12月18日 火曜日 午後2時59分


Brake Fluid


Specified fluid: Honda Heavy Duty Brake Fluid DOT 3


1Brake Fluid


uuMaintenance Under the HooduBrake Fluid


■ Checking the Brake Fluid


MAX


MIN


Check the fluid level several seconds after you turn the ignition switch to ON (w.


The fluid level should be between the MIN and MAX marks on the side of the reservoir.


Brake Reservoir


NOTICE Brake fluid marked DOT 5 is not compatible with your vehicle’s braking system and can cause extensive damage.


If the specified brake fluid is not available, you should use only DOT 3 or DOT 4 fluid from a sealed container as a temporary replacement.


Using any non-Honda brake fluid can cause corrosion and decrease the longevity of the system. Have the brake system flushed and refilled with Honda Heavy Duty Brake Fluid DOT 3 as soon as possible.


If the brake fluid level is at or below the MIN mark, have a dealer inspect for leaks or worn brake pads as soon as possible.


QRG


TOC


Index


Home


269


13 CIVIC HYBRID-31TR26100.book 270 ページ 2012年12月18日 火曜日 午後2時59分


uuMaintenance Under the HooduRefilling Window Washer Fluid


QRG


Refilling Window Washer Fluid Check the amount of window washer fluid using the washer fluid level gauge on the cap.


Level Gauge


If the level is low, fill the washer reservoir. Canadian models If the washer fluid is low, a message appears on the intelligent multi-information display (i-MID).


1Refilling Window Washer Fluid


NOTICE Do not use engine antifreeze or a vinegar/water solution in the windshield washer reservoir. Antifreeze can damage your vehicle’s paint. A vinegar/water solution can damage the windshield washer pump.


Pour the washer fluid carefully. Do not overflow the reservoir.


TOC


Index


Home


270


13 CIVIC HYBRID-31TR26100.book 271 ページ 2012年12月18日 火曜日 午後2時59分


Replacing Light Bulbs


Headlight Bulbs When replacing, use the following bulbs. High beam headlight: Low beam headlight:


60 W (HB3 for halogen bulb type) 51 W (HB4 for halogen bulb type)


■ High Beam Headlight


Bulb


Tab


Coupler


1. Push the tab to remove the coupler.


2. Rotate the old bulb to the left to remove.


3. Insert a new bulb into the headlight


assembly and turn it to the right.


4. Insert the coupler into the connector


of the bulb.


Continued


1Headlight Bulbs


NOTICE Halogen bulbs get very hot when lit.


Oil, perspiration, or a scratch on the glass can cause the bulb to overheat and shatter.


The headlight aim is set by the factory, and does not need to be adjusted. However, if you regularly carry heavy items in the trunk, have the aiming readjusted at a dealer or by a qualified technician.


When replacing a halogen bulb, handle it by its base, and protect the glass from contact with your skin or hard objects. If you touch the glass, clean it with denatured alcohol and a clean cloth.


The exterior lights’ inside lenses (headlights, brake lights, etc.) may fog temporarily after a car wash or while driving in the rain. This does not impact the exterior light function. However, if you see a large amount of water or ice accumulated inside the lenses, have your vehicle inspected by a dealer.


QRG


TOC


Index


Home


271


13 CIVIC HYBRID-31TR26100.book 272 ページ 2012年12月18日 火曜日 午後2時59分


uuReplacing Light BulbsuDaytime Running Light Bulbs


QRG


■ Low Beam Headlights


Clip


Passenger’s side 1. Remove the holding clip using a flat-tip


screwdriver, then remove the upper part of the windshield washer reservoir.


1Low Beam Headlights


Insert a flat-tip screwdriver, lift and remove the central pin to remove the clip.


Central pin


Driver’s and passenger’s side 2. Push the tab to remove the coupler.


3. Rotate the old bulb to the left to remove.


4. Insert a new bulb into the headlight


assembly and turn it to the right.

Loading...
x