see your dealer. Insert disc.
Press the magazine eject button, pull the magazine out, check for an error message, then insert the magazine again. If the message does not disappear, or the magazine cannot be pulled out, see your dealer. Insert disc magazine.
Will disappear when the temperature returns to normal.
129
2009 Civic Hybrid Table Of ContentsMain Menu08/07/19 09:43:43 31SNC630 0135
Playing an iPod (Models without navigation system)
iPod INDICATOR
DISP (DISPLAY) BUTTON
CD BUTTON
AUX BUTTON
RPT (REPEAT) BUTTON
TUNE KNOB SEEK/SKIP BUTTON
POWER/VOLUME KNOB
RDM (RANDOM) BUTTON
130
2009 Civic Hybrid Table Of ContentsMain Menu08/07/19 09:43:51 31SNC630 0136
Playing an iPod (Models without navigation system)
To Play an iPod This audio system can select and play the audio files on the iPod with the same controls used for the disc player. To play an iPod, connect it to the USB adapter cable in the console compartment by using your dock connector, then press the AUX button. The ignition switch must be in the ACCESSORY (I) or ON (II) position. The iPod will also be charged with the ignition switch in these positions.
The audio system reads and plays sound files to be playable on the iPod. The system cannot operate an iPod as a mass storage device. The system will only play songs stored on the iPod with iTunes.
iPod and iTunes are registered trademarks owned by Apple Inc.
iPods that are compatible with your audio system are listed below.
Model
iPod 5G iPod classic iPod nano iPod nano 2nd generation iPod nano 3rd generation iPod touch iPhone
Firmware
*
Ver. 1.2 or more Ver. 1.0 or more Ver. 1.2 or more Ver. 1.1.2 or more
Ver. 1.0 or more
Ver. 1.1.1 or more Ver. 1.1.1 or more
*
Use the latest firmware.
Use only compatible iPods with the latest firmware. iPods that are not compatible will not work in this audio unit.
CONTINUED
131
2009 Civic Hybrid Table Of ContentsMain Menu08/07/19 09:44:00 31SNC630 0137
Playing an iPod (Models without navigation system)
NOTE:
Do not connect your iPod using a hub.
ConnectinganiPod
USB CONNECTOR
CABLE
USB ADAPTER CABLE
1.
Pull out the USB connector from the holder and remove the cable from the clip in the console compartment.
DOCK CONNECTOR
2.
Connect your dock connector to the iPod correctly and securely.
3.
Install the dock connector to the USB adapter cable securely.
Do not keep the iPod in the vehicle. Direct sunlight and high heat will damage it.
Do not use an extension cable between the USB adapter cable equipped with your vehicle and your dock connector.
We recommend backing up your data before playing it.
In AAC format, DRM (digital rights management) files cannot be played. If the system finds a DRM file, the audio unit displays UNPLAYABLE, and then skips to the next file.
132
2009 Civic Hybrid Table Of ContentsMain Menu08/07/19 09:44:08 31SNC630 0138
Sample Display
OK to disconnect.
When the iPod is connected and the iPod mode is selected on the audio display, ‘‘USB LOAD’’ is shown for a few seconds, then the iPod indicator is shown in the display. In the radio or disc mode, the display shows a ‘‘USB CONNECTED’’ message for a few seconds. After loading, you will see the Honda mark on the iPod. That means you can only operate your iPod with the vehicle’s audio unit.
*
Playing an iPod (Models without navigation system)
*
It may take a few minutes for the Honda mark to display on the iPod. If the display does not change, this function is not supported on your iPod model or firmware.
TextDataDisplayFunction Each time you press the DISP button, the display mode switches between the album name, the song/track name, the artist name, or name off (which turns off the text display).
If the iPod indicator does not appear in the audio display, check the connections, and try to reconnect the iPod a few times.
If the audio system still does not recognize the iPod, the iPod may need to be reset. Follow the instructions that came with your iPod, or you can find reset instructions online at ipod.
www.apple.com/
The display shows up to 16
characters of the selected data. If the
text data has more than 16
characters, you will see the first 15
characters and the
indicator in
the display. Press and hold the DISP
button until the next 16 characters
are shown.
>
CONTINUED
133
2009 Civic Hybrid Table Of ContentsMain Menu08/07/19 09:44:15 31SNC630 0139
Playing an iPod (Models without navigation system)
ToChangeorSelectFiles You can use the SEEK/SKIP button while an iPod is playing to select passages and change files.
ToSelectaFilefromiPodMenu
−
Each time you press and side of the SEEK/
SKIP release the SKIP button, the system skips forward to the beginning of the next file. Press and release the side of the button to skip backward to the beginning of the current file. Press it again to skip to the beginning of the previous file.
To move rapidly within a file, press and hold either side ( of the SEEK/SKIP button.
or
134
mode.
Turn the TUNE knob. Push the TUNE knob.
You can also select a file from the iPod menu: ALBUM (albums), SONG (songs), P-LIST (playlists), and ARTIST (artists), by using the TUNE knob. Push the TUNE (SOUND) knob to switch the display to an iPod menu, then turn the TUNE knob to select a desired mode. If you stop adjusting, the displayed mode is selected after about five seconds. The system begins to play the first file stored in the selected
2009 Civic Hybrid Table Of ContentsMain Menu08/07/19 09:44:21 31SNC630 0140
Playing an iPod (Models without navigation system)
For example, with the album mode selected, turn the TUNE knob right or left to select a different album. Turn to the right to skip to the next album, and turn to the left to skip to the previous album. When the album is selected, the system begins to play the first song on that album. With the artist mode, turning the knob selects a different artist.
Selection within a Mode − Turn the TUNE knob to select a different item in the selected mode. The selected item will be shown on the display for a few seconds. When you stop turning, the system begins to play the first file from the selected item.
If you select ‘‘ALL,’’ all available files on the selected menu (album or artist) are played.
If you press and release the TUNE (SOUND) knob repeatedly, the display switches from the iPod menu to the sound settings (see page ).
115
CONTINUED
135
2009 Civic Hybrid Table Of ContentsMain Menu08/07/19 09:44:30 31SNC630 0141
Playing an iPod (Models without navigation system)
ToSelectRepeatorRandomMode: You can select any type of repeat and shuffle modes by using the RPT and RDM buttons.
RDM INDICATOR
−
This
RPT (Repeat one track) feature continuously plays a file. To activate repeat, press and release the RPT button. You will see RPT in the display. Press the button again to turn it off.
Pressing either side of the SEEK/ SKIP button or turning the TUNE knob changes the file while keeping the repeat feature.
−
This feature
RDM (All Random) plays all available files in a selected mode (playlists, artists, albums or songs) in random order. To activate this, press and release the RDM button. You will see RDM in the display.
F-RDM (Album Random) This feature plays all available albums in a selected mode (playlists, artists, albums or songs) in random order. The files in each album are played in
−
136
the recorded order. To activate this, press and release the RDM button repeatedly until you see F-RDM in the display.
Each time you press and release the RDM button, the mode changes from all random, to album random, then to normal play.
Press and hold the button until you hear a beep to turn off either random mode.
Pressing either side of the SEEK/ SKIP button or turning the TUNE knob changes a file while keeping the random function.
NOTE: Available operating functions vary on models or versions. Some functions may not be available on the vehicle’s audio system.
2009 Civic Hybrid Table Of ContentsMain Menu08/07/19 09:44:37 31SNC630 0142
Playing an iPod (Models without navigation system)
To Stop Playing Your iPod To play the radio, press the AM/FM button. Press the CD button to switch to the disc mode (if a disc is loaded).
*
DisconnectinganiPod You can disconnect the iPod at any time when you see the ‘‘OK to disconnect’’ message in the iPod display. With the AUX mode, you will see a ‘‘USB NO DATA’’ message in the display. Always make sure you see ‘‘OK to disconnect’’ in the iPod display before you disconnect it. Make sure to follow the iPod’s instructions on how to disconnect the dock connector from the USB adapter cable.
*
The displayed message may vary on models or versions. On some models, there is no message to disconnect.
If you reconnect the same iPod, the system may begin playing where it left off, depending on what mode the iPod is in when it is reconnected.
iPod Error Messages If you see an error message in the display, see page
138
137
2009 Civic Hybrid Table Of ContentsMain Menu08/07/19 09:44:41 31SNC630 0143
iPod Error Messages (Models without navigation system)
If you see an error message on the audio display while playing an iPod, find the solution in the chart to the right. If you cannot clear the error message, take your vehicle to your dealer.
Error Message
UNSUPPORTED
UNSUPPORTED VER
Solution
The system cannot read the file(s). Check the files in the iPod. There is a possibility that the files have been damaged. Appears when an unsupported iPod is inserted.
138
2009 Civic Hybrid Table Of ContentsMain Menu08/07/19 09:44:45 31SNC630 0144
Playing a USB Flash Memory Device (Models without navigation system)
SCAN BUTTON
DISP (DISPLAY) BUTTON
CD BUTTON
AUX BUTTON
139
RPT (REPEAT) BUTTON
TUNE KNOB SEEK/SKIP BUTTON
POWER/VOLUME KNOB
RDM (RANDOM) BUTTON
2009 Civic Hybrid Table Of ContentsMain Menu08/07/19 09:44:55 31SNC630 0145
Playing a USB Flash Memory Device (Models without navigation system)
To Play a USB Flash Memory Device This audio system can select and play the audio files on a USB flash memory device with the same controls used for the disc player. To play a USB flash memory device, connect it to the USB adapter cable in the console compartment, then press the AUX button. The ignition switch must be in the ACCESSORY (I) or ON (II) position.
The audio system reads and plays
the audio files on the USB flash
memory device in MP3, WMA or
AAC formats. The USB flash
memory device limit is up to 700
folders or up to 65535 files.
*
*
Only AAC format files recorded with iTunes are playable on this audio unit.
The recommended USB flash memory devices are 256 Mbyte or higher. Some digital audio players may be compatible as well.
Some USB flash memory devices (such as devices with security lock- out features, etc.) will not work in this audio unit.
NOTE:
Do not use a device such as a card reader or hard drive as the device or your files may be damaged.
Do not connect your USB flash memory device using a hub.
Do not use an extension cable to the USB adapter cable equipped with your vehicle.
Do not keep a USB flash memory device in the vehicle. Direct sunlight and high heat will damage it.
We recommend backing up your data before playing a USB flash memory device.
Depending on the type and number of files, it may take some time before they begin to play.
Depending on the software the files were made with, it may not be possible to play some files, or display some text data.
140
2009 Civic Hybrid Table Of ContentsMain Menu08/07/19 09:45:10 31SNC630 0146
Playing a USB Flash Memory Device (Models without navigation system)
The specifications for compatible MP3 files are: −
Sampling frequency:
32/44.1/48 kHz (MPEG1)
16/22.05/24 kHz (MPEG2)
Bitrate:
32/40/48/56/64/80/96/112/128/
160/192/224/256/320/VBR kbps
(MPEG1)
Supported standards:
MPEG1 Audio Layer3
MPEG2 Audio Layer3
Partition: Top partition only
Maximum layers: 8
−
−
− −
The specifications for compatible WMA files are: −
Sampling frequency:
32/44.1/48 kHz
Bitrate:
48 320/VBR kbps (Max 384)
Supported standards:
WMA version 7/8/9
Partition: Top partition only
Maximum layers: 8
−
−
− −
−
The specifications for compatible AAC files are: −
Sampling frequency:
8/11.025/12/16/22.05/24/32/
44.1/48 kHz
Bitrate:
48
Supported standards:
MPEG4/AAC LC
MPEG2/AAC LC
Partition: Top partition only
Maximum layers: 8
−
−
− −
320 kbps
−
Even if recorded in MP3, WMA or AAC format, a file with unsupported version cannot be played. If the system finds it, the audio unit displays UNSUPPORTED, and then skips to the next file.
In WMA or AAC format, DRM (digital rights management) files cannot be played. If the system finds a DRM file, the audio unit displays UNPLAYABLE FILE, and then skips to the next file.
CONTINUED
141
2009 Civic Hybrid Table Of ContentsMain Menu08/07/19 09:45:18 31SNC630 0147
Playing a USB Flash Memory Device (Models without navigation system)
ConnectingaUSBFlashMemory Device
USB CONNECTOR
CABLE
1.
Pull out the USB connector from the holder and remove the cable from the clip in the console compartment.
142
USB ADAPTER CABLE
2.
Connect the USB flash memory device to the USB adapter cable correctly and securely.
When the USB flash memory device is connected, the display shows a ‘‘USB CONNECTED’’ message for a few seconds. If the AUX mode is selected, a ‘‘USB LOAD’’ message is displayed for a few seconds.
When the USB flash memory device is connected, the USB indicator is shown in the display.
TextDataDisplayFunction Each time you press the DISP button, the display mode shows you in sequence, the folder name, the file name, the artist tag, the album tag, the track tag and name off (which turns off the text display).
The display shows up to 16
characters of the selected data. If the
text data has more than 16
characters, you will see the first 15
characters and the
indicator in
the display. Press and hold the DISP
button until the next 16 characters
are shown.
>
2009 Civic Hybrid Table Of ContentsMain Menu08/07/19 09:45:27 31SNC630 0148
Playing a USB Flash Memory Device (Models without navigation system)
ToChangeorSelectFiles Use the SEEK/SKIP button while a USB flash memory device is playing to select passages and change files.
folders.
RPT INDICATOR
−
Each time you press and side of the SEEK/
SKIP release the SKIP button, the system skips forward to the beginning of the next file. Press and release the side of the button to skip backward to the beginning of the current file. Press it again to skip to the beginning of the previous file.
To move rapidly within a file, press and hold either side ( of the SEEK/SKIP button.
or
−
FOLDER SELECTION To select a different folder, turn the TUNE knob right or left. Turn to the right to skip to the next folder, and turn to the left to skip to the previous folder. Turning the TUNE knob more than two clicks skips several
File repeat mode is shown.
−
RPT (File Repeat) This feature continuously plays a file. To activate file repeat, press and release the RPT button (preset 2). You will see RPT in the display.
−
F-RPT (Folder Repeat) This feature replays all the files in the selected folder in the order they are stored. To activate folder repeat, press and release the RPT button (preset 2) repeatedly until you see F-RPT in the display.
Each time you press and release the RPT button, the mode changes from file repeat to folder repeat, then to normal play.
Press and hold the button until you hear a beep to turn off either repeat mode. Pressing either side of the SEEK/SKIP button also turns off this feature.
CONTINUED
143
2009 Civic Hybrid Table Of ContentsMain Menu08/07/19 09:45:34 31SNC630 0149
Playing a USB Flash Memory Device (Models without navigation system)
−
F-RDM (Folder Random) This feature plays the files in the selected folder in random order. To activate folder random, press and release the RDM button (preset 3). You will see F-RDM in the display.
SCAN INDICATOR
−
This
F-SCAN (Folder Scan) feature samples the first file in each folder in the order they are stored. To activate folder scan, press and release the SCAN button repeatedly until you see F-SCAN in the display. You will get a 10 second sampling of the first file in each folder.
Each time you press and release the SCAN button, the mode changes from file scan, to folder scan, then to normal play.
Press and hold the button until you hear a beep to turn off either scan mode.
File scan is selected.
−
This feature
SCAN (File Scan) samples all files in the selected folder in the order they are stored. To activate the scan, press and release the SCAN button. You will see SCAN in the display. You will get a 10 second sampling of each file in the folder.
−
This feature
RDM (All Random) plays all the files in random order. To activate all random, press and release the RDM button (preset 3) repeatedly until you see RDM in the display.
Each time you press and release the RDM button, the mode changes from folder random, to all random, then to normal play.
Press and hold the button until you hear a beep to turn off either random mode.
144
2009 Civic Hybrid Table Of ContentsMain Menu08/07/19 09:45:41 31SNC630 0150
Playing a USB Flash Memory Device (Models without navigation system)
To Stop Playing a USB Flash Memory Device To play the radio, press the AM/FM button. Press the CD button to switch to the disc mode (if a disc is loaded).
If you reconnect the same USB flash memory device, the system will begin playing where it left off.
DisconnectingaUSBFlashMemory Device You can disconnect the USB flash memory device at any time even if the USB mode is selected on the audio system. With the AUX mode, you will see a ‘‘USB NO DATA’’ message in the display. Make sure to follow the USB flash memory device’s instructions when you remove it.
If you reconnect the same USB flash memory device, the system will begin playing where it left off.
USB Flash Memory Device Error Messages If you see an error message in the display, see page
146
145
2009 Civic Hybrid Table Of ContentsMain Menu08/07/19 09:45:45 31SNC630 0151
USB Flash Memory Device Error Messages (Models without navigation system)
If you see an error message on the audio display while playing a USB flash memory device, find the solution in the chart to the right. If you cannot clear the error message, take your vehicle to your dealer.
Error Message
Solution
UNPLAYABLE FILE
UNSUPPORTED
The system cannot read the file(s). Check the files in the USB flash memory device. There is a possibility that the files have been damaged. Appears when the unsupported USB flash memory device is inserted.
146
2009 Civic Hybrid Table Of ContentsMain Menu08/07/22 09:27:03 31SNC630 0152
Audio System (Models with navigation system)
Voice Control System In addition to the standard audio controls, the audio system in your vehicle can be operated using the voice control system. See the navigation section in your Quick Start Guide for an overview of this system, and the Navigation System Manual for complete details.
Playing the AM/FM Radio
FM2 ICON
FM1 ICON
AM ICON
AM/FM BUTTON AUDIO BUTTON SCAN BUTTON
TUNE BAR
PRESET BUTTONS
U.S. model is shown.
AUTO SELECT ICON
BACKGROUND ICON
SOUND ICON
147
2009 Civic Hybrid Table Of ContentsMain Menu08/07/19 09:46:00 31SNC630 0153
Playing the AM/FM Radio (Models with navigation system)
The band and frequency that the radio was last tuned to are displayed. To change bands, press the AM/FM button, or touch the desired band icon (FM1, FM2, AM, XM1, or XM2). On the FM band, STEREO will be displayed if the station is broadcasting in stereo. Stereo reproduction on AM is not available.
U.S.modelsonly For information on XM radio, see page
151
To Play the AM/FM Radio The ignition switch must be in the ACCESSORY (I) or ON (II) position. Turn the system on by pushing the power/volume knob or the AM/FM button. Adjust the volume by turning the power/volume knob.
Pushing the AUDIO button will also turn on the system.
You can also operate the audio system without using the control icons on the audio screen. Use the control buttons on the left side of the screen. The status bar appears on the bottom of the screen each time you operate any of the control buttons. On the navigation screen, you can also see audio information by touching the AUDIO INFO icon on the lower of the screen.
148
To Select a Station You can use any of five methods to find radio stations on the selected band: the preset buttons, and
TUNE, SEEK, SCAN,
AUTO SELECT
−
Use the TUNE bar to tune
TUNE the radio to a desired frequency. Press the side of the bar to tune to a higher frequency, and press the
▲
▼
side to tune to a lower
frequency.
or
▲ ▼
Press and hold the side of the TUNE bar until you hear two beeps to change the frequency rapidly. Release the bar when the display reaches the desired frequency.
2009 Civic Hybrid Table Of ContentsMain Menu08/07/19 09:46:08 31SNC630 0154
−
The seek function
SEEK searches up and down from the current frequency to find a station with a strong signal. To activate it, press and hold the side of the TUNE bar until you hear a beep, then release it.
▲ ▼
or
−
SCAN The scan function samples all stations with strong signals on the selected band. To activate it, press the SCAN button, then release it. You will see SCAN in the display. The system will scan for a station with a strong signal. When it finds one, it will stop and play that station for about 10 seconds.
Playing the AM/FM Radio (Models with navigation system)
If you do nothing, the system will then scan for the next strong station and play it for 10 seconds. When it plays a station you want to listen to, press the SCAN button again.
Each preset button’s frequency is shown on the bottom of the audio display.
−
Each preset button can
Preset store one frequency on AM and two frequencies on FM.
1.
2.
Select the desired band, AM or FM. FM1 and FM2 let you store six stations each.
Use the tune, seek, or scan function to tune the radio to a desired station.
3.
Pick a preset button, and hold it until you hear a beep.
4.
Repeat steps 1 through 3 to store a total of six stations on AM and twelve stations on FM.
CONTINUED
149
2009 Civic Hybrid Table Of ContentsMain Menu08/07/19 09:46:12 31SNC630 0155
Playing the AM/FM Radio (Models with navigation system)
− If you are
AUTO SELECT traveling far from home and can no longer receive your preset stations, you can use the auto select feature to find stations in the local area.
Press the AUDIO button to view the audio control icons, then touch the AUTO SEL icon. You will see AUTO SEL flashes in the display, and the system goes into scan mode for several seconds. It stores the frequencies of six AM, and twelve FM stations in the preset buttons.
You will see a ‘‘0’’ displayed after pressing a preset button if auto select cannot find a strong station for every preset button.
If you do not like the stations auto select has stored, you can store other frequencies on the preset buttons as previously described.
Toturnoffautoselect, AUTO SEL icon. This restores the presets you originally set.
press the
For information on AM/FM radio
frequencies and reception, see page
204
150
2009 Civic Hybrid Table Of ContentsMain Menu08/07/19 09:46:17 31SNC630 0156
Playing the XM Radio (Models with navigation system)
XM RADIO ICON
MODE ICON
JOYSTICK
CATEGORY INDICATOR
U.S.modelsonly
POWER/VOLUME KNOB
AM/FM BUTTON
XM RADIO BUTTON
AUDIO BUTTON
SCAN BUTTON
PRESET CHANNEL NUMBER
TUNE BAR
PRESET BUTTONS
151
2009 Civic Hybrid Table Of ContentsMain Menu08/07/19 09:46:23 31SNC630 0157
Playing the XM Radio (Models with navigation system)
Your audio system is capable of receiving XM Radio anywhere in the United States, except Hawaii and Alaska.
XM is a registered trademark of XM Satellite Radio , Inc.
XM Radio receives signals from two satellites to produce clear, high- quality digital reception. It offers many channels in several categories. Along with a large selection of different types of music, XM Radio allows you to view channel and category selections in the display. When you press and hold the AUDIO button, the display also shows all XM information.
152
Operating the XM Radio To listen to XM Radio, turn the ignition switch to the ACCESSORY (I) or the ON (II) position. Push the power/volume knob to turn on the audio system, and press the XM RADIO button. Adjust the volume by turning the knob. The last channel you listened to will show in the display.
You can also change to the XM
Radio while you are listening to an
FM station, AM station, disc, pc card,
etc., by touching the XM1 or XM2
icon on the audio display.
You can also operate the radio using the control buttons on the left side of the screen. The status bar appears on the bottom of the screen each time you press any of the control buttons. On the navigation screen, you can also see the audio information by touching the AUDIO INFO icon on the lower of the screen.
−
To switch between
MODE channel mode and category mode, touch the MODE icon. In channel mode, you can select all of the available channels. In category mode, such as Jazz, Rock, Classical, etc., you can select all of the channels within that category. Each time you touch and release the MODE icon, the display changes between the channel mode and the category mode.
2009 Civic Hybrid Table Of ContentsMain Menu08/07/19 09:46:33 31SNC630 0158
Playing the XM Radio (Models with navigation system)
TUNE Press the TUNE bar to change channel selections. Press
−
for lower numbered
for higher numbered channels ▼
▲ and channels. In the category mode, you can only select channels within that category.
Press and hold
−
CATEGORY either side of the TUNE bar to select another category.
or
) until you hear a beep
On the audio display, you will see the selected CHANNEL (number), CATEGORY, NAME (artist name), and TITLE (music title).
You may experience periods when XM Radio does not transmit the artist’s name and song title information. If this happens, there is nothing wrong with your system.
−
The scan function gives
SCAN you a sampling of all channels while in the channel mode. In the category mode, only the channels within that category are scanned. To activate scan, press the SCAN button or touch the SCAN icon on the screen. The system plays each channel in numerical order for a few seconds, then selects the next channel. When you hear a channel you want to listen to, press the button or touch the icon again.
−
Preset
You can store up to 12
preset channels using each preset
button or preset icons on the screen.
Each preset button or icon stores
one channel from the XM1 band and
one channel from the XM2 band.
To store a channel:
1.
2.
Press the XM RADIO button. Either XM1 or XM2 will show in the display.
Use the tune, seek, or scan function to tune to a desired channel.
In category mode, only channels within that category can be selected. In channel mode, all channels can be selected.
3.
Pick the preset button (icon) you want for that channel. Press and hold the button (icon) until you hear a beep.
CONTINUED
153
2009 Civic Hybrid Table Of ContentsMain Menu08/07/19 09:46:42 31SNC630 0159
Playing the XM Radio (Models with navigation system)
4.
Repeat steps 2 and 3 to store the first six channels.
5.
Press the XM RADIO button again
or touch the other XM icon (XM1
or XM2) on the audio display.
Store the next six channels using
steps 2 and 3.
Once a channel is stored, press and release the proper preset button (icon) to tune to it. Each preset button’s channel is shown on the bottom of the audio display.
154
ToSelectaChannelfromList
CHANNEL LIST ICON
You can also select a desired channel from the list shown on the screen. Press the AUDIO button to show the audio control display on the navigation screen.
Touch the CHANNEL LIST icon to switch the display to the channel list which shows all channels in all categories. Select and touch a desired channel.
or
▲ ▼
To scroll through the display, touch the icon on the side of the screen. To go back to the previous display, touch the Return icon on the screen.
2009 Civic Hybrid Table Of ContentsMain Menu08/07/19 09:46:49 31SNC630 0160
Playing the XM Radio (Models with navigation system)
To select a desired icon with the joystick, move it in the appropriate direction, then press ENT.
XM Radio Display Messages
‘‘LOADING’’ audio or program information.
XM is loading the
−
−
‘‘OFF AIR’’ currently selected is no longer broadcasting.
The channel
−
The encryption
‘‘UPDATING’’ code is being updated. Wait until the encryption code is fully updated. Channels 0 and 1 should still work normally.
−
The signal is
‘‘NO SIGNAL’’ currently too weak. Move the vehicle to an area away from tall buildings, and with an unobstructed view of the southern horizon.
−
The selected channel
‘‘ - - - - ’’ number does not exist or is not part of your subscription.
‘‘NO INFO’’ This channel has no artist or title information at this time.
−
‘‘ANTENNA’’ There is a problem with the XM antenna. Please consult your dealer.
−
CONTINUED
155
2009 Civic Hybrid Table Of ContentsMain Menu08/07/19 09:46:54 31SNC630 0161
Playing the XM Radio (Models with navigation system)
Signal may be blocked by mountains or large obstacles to the south.
Signal weaker in these areas.
The XM satellites are in orbit over the equator; therefore, objects south of the vehicle may cause satellite reception interruptions. To help compensate for this, ground-based repeaters are placed in major metropolitan areas.
Satellite signals are more likely to be blocked by tall buildings and mountains the farther north you travel from the equator. Carrying large items on a roof rack can also block the signal.
SATELLITE
156
GROUND REPEATER
2009 Civic Hybrid Table Of ContentsMain Menu08/07/19 09:47:04 31SNC630 0162
Playing the XM Radio (Models with navigation system)
Depending on where you drive, you may experience reception problems. Interference can be caused by any of these conditions:
Driving on the north side of an east/west mountain road. Driving on the north side of a large commercial truck on an east/west road. Driving in tunnels. Driving on a road beside a vertical wall, steep cliff, or hill to the south of you. Driving on the lower level of a multi-tiered road. Driving on a single lane road alongside dense trees taller than 50 ft. (15 m) to the south of you. Large items carried on a roof rack.
There may be other geographic situations that could affect XM Radio reception.
AsrequiredbytheFCC: Changesormodificationsnotexpressly approvedbythepartyresponsiblefor compliancecouldvoidtheuser’s authoritytooperatetheequipment.
Receiving XM Radio Service If your XM Radio service has expired or you purchased your vehicle from a previous owner, you can listen to a sampling of the broadcasts available on XM Radio. With the ignition switch in the ACCESSORY (I) or ON (II) position, push the power/volume knob to turn on the audio system and press the XM RADIO button. A variety of music types and styles will play.
If you decide to purchase XM Radio service, contact XM Radio at www.xmradio.com 1-800-852-9696. You will need to give them your radio I.D. number and your credit card number. To get your radio I.D. number, press the TUNE
, or at
bar until ‘‘0’’ appears in the display. Your I.D. will appear in the display.
After you’ve registered with XM Radio, keep your audio system in the satellite radio mode while you wait for activation. This should take about 30 minutes.
While waiting for activation, make sure your vehicle remains in an open area with good reception. Once your audio system is activated, you’ll be able to listen to XM Radio broadcasts. XM Radio will continue to send an activation signal to your vehicle for at least 12 hours from the activation request. If the service has not been activated after 36 hours, contact XM Radio.
157
2009 Civic Hybrid Table Of ContentsMain Menu08/07/19 09:47:15 31SNC630 0163
Adjusting the Sound (Models with navigation system)
SPEAKER SETTING
−
Adjusts the side-to-
BALANCE side strength of the sound. To adjust the left/right balance, touch the L or R icon.
−
Adjusts the
SUBWOOFER strength of sound from the subwoofer speaker. To adjust the sound strength, touch
or
on each side of the adjustment
BASS/TREBLE SETTING
bar.
SOUND ICON
You can adjust the sound on the navigation screen. To adjust the sound, push the AUDIO button, then enter the sound grid by touching the SOUND icon on the display.
or
Adjusts the bass. −
BASS − TREBLE adjust the treble and bass, touch on each side of the
Adjusts the treble. To
treble or bass adjustment bar. The adjustment bar on the right lower display shows you the current setting.
−
FADER Adjusts the front-to-back strength of the sound. To adjust the front/rear fader, touch the FR or RR icon.
158
The right upper display shows you the current setting of the sound strength coming from each speaker.
−
The SVC mode
SVC (speed-sensitive volume compensation) controls the volume based on vehicle speed. The faster you go, the louder the audio volume becomes. As you slow down, the audio volume decreases. Touch the appropriate icon (Low, Mid, Hi, Off) to select the mode.
2009 Civic Hybrid Table Of ContentsMain Menu08/07/19 09:47:21 31SNC630 0164
Adjusting the Sound (Models with navigation system)
ScreenMode You can select the background screen to display the sound level. There are three screen modes: level (the sound level is shown with the vertical bars), spectrum analysis (the sound level appears as ripples of water), and off. Each time you touch the background icon, the display changes.
This function is set to MID as the default setting when the vehicle leaves the factory. If you feel the sound is too loud, choose low. If you feel the sound is too quiet, choose Hi.
You can also select the icon with the joystick. Move it up and down to move the highlighting and scroll through lists. Select the icon, then move the joystick to left or right to change the setting.
The system will return to the audio display about 10 seconds after you stop adjusting a mode.
Audio System Lighting You can use the instrument panel brightness control buttons to adjust the illumination of the audio system (see page illuminates when the parking lights are on, even if the radio is off.
). The audio system
75
159
2009 Civic Hybrid Table Of ContentsMain Menu08/07/19 09:47:26 31SNC630 0165
Playing a Disc (Models with navigation system)
CD ICON
JOYSTICK
RANDOM BUTTON
FAST FORWARD BUTTON
SKIP BUTTON
+
REPEAT BUTTON
REWIND BUTTON
SKIP BUTTON
−
POWER/VOLUME KNOB
OPEN BUTTON
CD BUTTON
AUDIO BUTTON
SCAN BUTTON
TUNE BAR
160
2009 Civic Hybrid Table Of ContentsMain Menu08/07/19 09:47:38 31SNC630 0166
Playing a Disc (Models with navigation system)
Video CDs and DVDs do not work in this unit.
−
The specifications for compatible MP3 files are: −
Sampling frequency: 32/44.1/48 kHz (MPEG1) 16/22.05/24 kHz (MPEG2) Bitrate: 32/40/48/56/64/80/96/112/128/ 160/192/224/256/320 kbps (MPEG1) 8/16/24/32/40/48/56/64/80/96/ 112/128/160 kbps (MPEG2) Compatible with variable bitrate and multi-session Maximum layers (including ROOT): 8 layers
−
−
To Play a Disc You operate the disc player with the same controls used for the radio. To load or play discs, the ignition switch must be in the ACCESSORY (I) or ON (II) position.
Do not use discs with adhesive labels. The label can curl up and cause the disc to jam in the unit.
This audio system can also play CD-
Rs and CD-RWs compressed in MP3
or WMA formats. When playing a
disc in MP3, you will see ‘‘MP3’’ on
the screen. In WMA format, ‘‘WMA’’
will appear on the screen. You can
select up to 99 folders and play up to
999 tracks. If the disc has a complex
structure, it takes a while to read the
disc before the system begins to play
it.
The specifications for compatible WMA files are: −
Sampling frequency: 32/44.1/48 kHz Bitrate: 48/64/80/96/128/160/192 kbps Compatible with variable bitrate and multi-session Maximum layers (including ROOT): 8 layers
−
−
−
NOTE: If a file on an MP3 or WMA disc is protected by digital rights management (DRM), the audio unit displays CD FORMAT, and then skips to the next file.
CONTINUED
161
2009 Civic Hybrid Table Of ContentsMain Menu08/07/19 09:47:46 31SNC630 0167
Playing a Disc (Models with navigation system)
ToLoadaDisc
DISC SLOT
OPEN BUTTON
The disc player is behind the navigation screen. To use the disc player, press the OPEN button beside the screen. The screen folds back, and the disc player appears.
Insert a disc about halfway into the disc slot. The drive will pull the disc in the rest of the way and begin to play it.
You cannot load and play 3-inch (8-cm) discs in this system.
CLOSE BUTTON To return the screen to the upright position, press the CLOSE button on the edge of the screen panel. Do not use the folded screen as a tray. If you put a cup, for example, on the screen, the liquid inside the cup may spill on the screen when you go over a bump.
162
2009 Civic Hybrid Table Of ContentsMain Menu08/07/19 09:47:55 31SNC630 0168
Push the AUDIO button beside the screen to show the audio display and operate the disc player.
You can also operate the audio system without using the control icons on the audio screen. Press the CD button. The status bar appears on the bottom of the screen. On the navigation screen, you can see the audio information whenever you touch the AUDIO INFO icon on the lower portion of the screen.
When playing a CD recorded with text data, the track, album, and artist name are shown on the audio display. When playing a disc in MP3 or WMA, the folder number and name, the file number and name, the artist name, and the elapsed time are shown. The system will continuously play a disc until you change modes. If the disc was not recorded with text data, it will not be displayed.
Playing a Disc (Models with navigation system)
ToChangeorSelectTracks/Files
PRESET BUTTON’S FUNCTION
You can also select an icon with the joystick. Move it to left, right, up, or down to change the highlighting and scroll through lists. Then press the ENT on the top of the joystick to select the icon.
PRESET BUTTONS
U.S. model is shown.
You can use the preset buttons while a disc is playing to select passages and change tracks (files in MP3 or WMA mode). Each preset button’s function is shown on the bottom of the screen.
−
Each time you press and (preset 6), the player
SKIP release skips forward to the beginning of the next track (file in MP3 or WMA mode). Press and release
(preset 5), to skip backward to
the beginning of the current track. Press it again to skip to the beginning of the previous track.
FF/REW a track/file, press and hold
To move rapidly within
−
(preset 4) or
(preset 3).
CONTINUED
163
2009 Civic Hybrid Table Of ContentsMain Menu08/07/19 09:48:02 31SNC630 0169
Playing a Disc (Models with navigation system)
−
To
InMP3orWMAmode FOLDER SELECTION select a different folder, press either side of the TUNE bar to move to the beginning of the next folder. Press side of the TUNE bar to skip the to the next folder, and the side to move to the beginning of the current folder. Press it again to skip to the beginning of the previous folder.
▼
▲
−
TRACK REPEAT (FILE REPEAT) To continuously replay a track (file in MP3 or WMA mode), press and release the RPT button (preset 1). You will see TRACK REPEAT in the display. Press and hold the RPT button for 2 seconds to turn it off.
164
−
This
InMP3orWMAmode FOLDER RANDOM feature, when activated, plays all files in each folder in random order, rather than in the order they are compressed. To activate folder random, press the RDM button (preset 2) twice. You will see FOLDER RANDOM in the display. The system then selects and plays files randomly. This continues until you deactivate folder random by pressing the RDM button again, or if you select a different folder with the TUNE bar.
−
This feature,
InMP3orWMAmode FOLDER REPEAT when activated, replays all files in the selected folder in the order they are compressed. To activate folder repeat, press and hold the RPT button (preset 1). You will see FOLDER REPEAT in the display. The system continuously replays the current folder. Press the RPT button again to turn it off. Pressing the RDM button or selecting a different folder with the TUNE bar also turns off folder repeat.
−
TRACK RANDOM (Random within a disc/folder) This feature plays the tracks within a disc (the files within a folder) in random order. To activate track random, press and release the RDM button (preset 2). You will see TRACK RANDOM in the display. Press and hold the RDM button for 2 seconds to return to normal play.
2009 Civic Hybrid Table Of ContentsMain Menu08/07/19 09:48:10 31SNC630 0170
−
SCAN (TRACK/FILE SCAN) The scan function samples all tracks (files in MP3 or WMA) in the order they were recorded. To activate scan, press and release the SCAN button. You will see TRACK SCAN in the display. You will get a 10 second sampling of each track/file on the disc. Press and hold the SCAN button for 2 seconds to get out of scan mode and play the last track/ file sampled.
Pressing either SKIP button (preset 5 or 6) also turns off scan.
Playing a Disc (Models with navigation system)
This feature,
InMP3orWMAmode FOLDER SCAN − when activated, samples all the first files in each folder on the disc in order. To activate folder scan, press and hold the SCAN button. You will see FOLDER SCAN in the display.
The system plays the first file in each folder for about 10 seconds. If you do nothing, the system then plays the first file in each folder for 10 seconds each. After playing the first file of the last folder, the system goes to normal play.
Pressing either SKIP button (preset 5 or 6), or selecting a different folder with the TUNE bar, or pressing the SCAN button, also turns off folder scan.
UsingaTrackList
CD ICON
TRACK LIST ICON
You can also select a track/file directly from the folder and file lists on the audio display. Press the AUDIO button to show the audio display.
CONTINUED
165
2009 Civic Hybrid Table Of ContentsMain Menu08/07/19 09:48:18 31SNC630 0171
Playing a Disc (Models with navigation system)
FOLDER ICON
FOLDER ICON
FOLDER ICON
TRACK/FILE ICON
RETURN ICON
RETURN ICON
Touch the Track List icon to switch the display to the folder list, then select and touch a desired folder.
The display changes to the file list. Then, select and touch a desired file.
Touch the folder icon on the upper left of the screen to move to the parent folder.
166
or
▲ ▼
To scroll through the display, touch the icon on the side of the screen. To go back to the previous display, touch the Return icon on the screen.
To select a desired icon with the joystick, move it in the appropriate direction, then press ENT.
Press the AUDIO button to go back to the normal audio playing display. Pressing the CANCEL button goes back to the previous screen, and pressing the MAP button cancels the audio control display on the screen.
2009 Civic Hybrid Table Of ContentsMain Menu08/07/19 09:48:26 31SNC630 0172
When playing a CD recorded with text data, each track name is shown on the audio display. With a disc recorded in MP3 or WMA, the folder number is also displayed.
If the disc was not recorded with text data, only the track number is shown.
Playing a Disc (Models with navigation system)
To Stop Playing a Disc To play the radio when a disc is playing, press the AM/FM button or touch the FM1, FM2, AM, XM1, or XM2 icon. If a PC card is in the audio unit, touch the CARD icon to play the PC card. Press the CD button again or touch the CD icon to switch back to the disc player.
To play an audio unit connected to the auxiliary input jack or the USB adapter cable when a disc is playing, touch the AUX or USB icon.
If you turn the system off while a disc is playing, either with the power/volume knob or by turning off the ignition switch, the disc will stay in the drive. When you turn the system back on, the disc will begin playing where it left off.
142
RemovingaDisc To remove a disc from the audio unit, fold back the screen by pressing the ). Press OPEN button (see page the disc eject button ( ) to remove the disc. If you eject the disc, but do not remove it from the slot, the system will automatically reload it after 10 seconds and put it in pause mode. To begin playing, press the CD button.
To return the screen to the upright position, press the CLOSE button.
You cannot close the screen if a disc is partially inserted into its slot.
You can also eject the disc when the ignition switch is off.
167
2009 Civic Hybrid Table Of ContentsMain Menu08/07/19 09:48:32 31SNC630 0173