2016 Ford Fusion Owners Manual

310

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

12345E75442E146026Wheels and Tires

TECHNICAL SPECIFICATIONS Wheel Lug Nut Torque Specifications

WARNING

When a wheel is installed, always remove any corrosion, dirt or foreign materials present on the mounting surfaces of the wheel or the surface of the wheel hub, brake drum or brake disc that contacts the wheel. Make sure that any fasteners that attach the rotor to the hub are secured so they do not interfere with the mounting surfaces of the wheel. Installing wheels without correct metal-to-metal contact at the wheel mounting surfaces can cause the wheel nuts to loosen and the wheel to come off while your vehicle is in motion, resulting in loss of control.

Bolt size M12 x 1.5

Ib-ft (Nm)* 100 (135)

*Torque specifications are for nut and bolt threads free of dirt and rust. Use only Ford recommended replacement fasteners. Retighten the lug nuts to the specified torque within 100 miles (160 kilometers) after any wheel disturbance (such as tire rotation, changing a flat tire, wheel removal).

311

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

E178187Wheels and Tires

Wheel pilot bore

Inspect the wheel pilot bore and mounting surface prior to installation. Remove any visible corrosion or loose particles.

312

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

E145950Capacities and Specifications

ENGINE SPECIFICATIONS

Engine

1.5L EcoBoost engine

2.0L EcoBoost engine

2.5L engine

92

122

152

Minimum 87 octane

Minimum 87 octane

Minimum 87 octane

10.0:1

9.3:1

9.7:1

Cubic inches Required fuel Compression

ratio

Spark plug gap

0.025-0.029 in. (0.65-

0.75 mm)

Drivebelt Routing 1.5L engine

MOTORCRAFT PARTS

Component

1.5L EcoBoost Engine

Air filter element Oil filter Battery

BXT-90T5-500

BXT-90T5-5901

BAGM-48H6-7602

313

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

0.027-0.031 in. (0.70-0.80 mm) 2.0L and 2.5L engines

0.049-0.053 in. (1.25-1.35 mm)

A. Long drivebelt is on first pulley groove

closest to engine

B. Short drivebelt is on second pulley

groove farthest from engine

2.5L Engine

2.0L EcoBoost

Engine FA-1912
FL-910S

BXT-90T5-5901

BXT-90T5-500

BXT-90T5-5901

E167586E161383ABCapacities and Specifications

Component

1.5L EcoBoost Engine

2.0L EcoBoost

2.5L Engine

Engine SP-537
FP-71

SP-539

SP-530

WW-2601 (driver side)

WW-2700 (passenger side)

Spark plugs Cabin air filter Windshield wiper blade 1This part is designed for vehicles with Intelligent Access. 2This part is designed for vehicles with Automatic-Start-Stop. We recommend Motorcraft replacement parts available at your Ford dealer or at fordparts.com for scheduled maintenance. These parts meet or exceed Ford Motor Company’s specifications and are engineered for your vehicle. Use of other parts may impact vehicle performance, emissions and durability. Your warranty may be void for any damage related to use of other parts. If a Motorcraft oil filter is not available, use an oil filter that meets industry performance specification SAE/USCAR-36. For spark plug replacement, contact an authorized dealer. Replace the spark plugs at the appropriate intervals. See Scheduled Maintenance (page 464).

314

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

Capacities and Specifications

VEHICLE IDENTIFICATION NUMBER The vehicle identification number is located on the left-hand side of the instrument panel.

Make, vehicle line, series, body type Engine type Check digit Model year Assembly plant Production sequence number

VEHICLE CERTIFICATION LABEL

Please note that in the graphic, XXXX is representative of your vehicle identification number. The Vehicle Identification Number contains the following information:

World manufacturer identifier Brake system, Gross Vehicle Weight Rating, Restraint Devices and their locations

315

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

The National Highway Traffic Safety Administration Regulations require that a Safety Compliance Certification Label be affixed to a vehicle and prescribe where the Safety Compliance Certification Label may be located. The Safety Compliance Certification Label shall be affixed to either the door hinge pillar, the door latch post, or the edge of the door near the door latch, next to the driver's seating position.

E142476E142477E167469Capacities and Specifications

TRANSMISSION CODE DESIGNATION

The transmission code is on the Safety Compliance Certification Label. The following table shows the transmission code along with the transmission description.

Description

Six-speed automatic transmis- sion.

Code

CAPACITIES AND SPECIFICATIONS - 1.5L ECOBOOST™ Capacities

WARNING

The air conditioning refrigerant system contains refrigerant R-134a under high pressure. Only qualified personnel should service the air conditioning refrigerant system. Opening the air conditioning refrigerant system can cause personal injury.

Item

Engine oil Engine coolant Brake fluid

Automatic transmission fluid1
Windshield washer fluid Fuel tank (Front Wheel Drive)

Capacity

4.3 qt (4.1 L) 11.1 qt (10.5 L)

Between MIN/MAX on brake fluid reservoir

9.0 qt (8.5 L)

Fill as required 16.5 gal (62.5 L)

316

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

E167814Capacities and Specifications

Item

Capacity

A/C refrigerant A/C refrigerant compressor oil 5.2 fl oz (153.8 ml) 1Approximate dry fill capacity. Actual amount may vary during fluid changes.

20 oz (0.56 kg)

Specifications Materials

Name Recommended motor oil (U.S.): Motorcraft SAE 5W-20 Premium Synthetic Blend Motor Oil XO-5W20-QSP Recommended motor oil (Canada): Motorcraft SAE 5W-20 Super Premium Motor Oil CXO-5W20-LSP12
Recommended motor oil (Mexico): Motorcraft SAE 5W-20 Synthetic Motor Oil MXO-5W20-QSP Optional motor oil (U.S. and Mexico): Motorcraft SAE 5W-20 Full Synthetic Motor Oil XO-5W20-QFS Optional motor oil (Canada): Motorcraft SAE 5W-20 Synthetic Motor Oil CXO-5W20-LFS12
Engine coolant (U.S. and Mexico): Motorcraft Orange Antifreeze/Coolant Prediluted VC-3DIL-B Engine coolant (Canada): Motorcraft Orange Antifreeze/Coolant Prediluted CVC-3DIL-B Brake fluid: Motorcraft DOT 4 Low Viscosity (LV) High Performance Motor Vehicle Brake Fluid PM-20
Automatic transmission fluid (U.S. and Mexico): Motorcraft MERCON LV Automatic Transmission Fluid

Specification

WSS-M2C945-A

WSS-M2C945-A

WSS-M2C945-A

WSS-M2C945-A

WSS-M2C945-A

WSS-M97B44-D2

WSS-M97B44-D2

WSS-M6C65-A2

WSS-M2C938-A MERCON LV

317

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

Capacities and Specifications

Name

Specification

XT-10-QLVC Automatic transmission fluid (Canada): Motorcraft MERCON LV Automatic Transmission Fluid CXT-10-LV12
Windshield washer fluid (U.S. and Mexico): Motorcraft Premium Windshield Wash Concentrate with Bitterant ZC-32-B2
Windshield washer fluid (Canada): Motorcraft Premium Quality Windshield Washer Fluid CXC-37-(A, B, D, F) A/C refrigerant (U.S.): Motorcraft R-134a Refrigerant YN-19
A/C refrigerant (Canada): Motorcraft R-134a Refrigerant CYN-16-R A/C refrigerant (Mexico): Motorcraft R-134a Refrigerant MYN-19
A/C refrigerant compressor oil: Motorcraft PAG Refrigerant Compressor Oil YN-12-D Multi-purpose grease: Motorcraft Multi-Purpose Grease Spray XL-5
Lock cylinders (U.S.): Penetrating and Lock Lubricant XL-1
Lock cylinders (Canada): Penetrating Fluid CXC-51-A Lock cylinders (Mexico): Penetrating and Lock Lubricant MXL-1

WSS-M2C938-A MERCON LV

WSS-M14P19-A

WSS-M14P19-A

WSH-M17B19-A

WSH-M17B19-A

WSH-M17B19-A

WSH-M1C231-B

ESB-M1C93-B

--

--

--

318

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

Capacities and Specifications

If you use oil and fluids that do not meet the defined specification and viscosity grade, this may lead to: • Component damage which is not covered by the vehicle warranty. Longer engine cranking periods. Increased emission levels.

• • • Reduced engine performance. • Reduced fuel economy. • Degraded brake performance. We recommend Motorcraft motor oil for your vehicle. If Motorcraft oil is not available, use motor oils of the recommended viscosity grade that meet API SN requirements and display the API Certification Mark for gasoline engines. Do not use oil labeled with API SN service category unless the label also displays the API certification mark.

An oil that displays this symbol conforms to current engine, emission system and fuel economy performance standards of the International Lubricants Specification Advisory Council (ILSAC). Do not use supplemental engine oil additives because they are unnecessary and could lead to engine damage that may not be covered by your vehicle warranty. Note: Ford recommends using DOT 4 Low Viscosity (LV) High Performance Brake Fluid or equivalent meeting WSS-M6C65-A2. Use of any fluid other than the recommended fluid may cause degraded brake performance and not meet the Ford performance standards. Keep brake fluid clean and dry. Contamination with dirt, water, petroleum products or other materials may result in brake system damage and possible failure. Note: Automatic transmissions that require MERCON LV transmission fluid should only use MERCON LV transmission fluid. The use of any other fluid may cause transmission damage.

CAPACITIES AND SPECIFICATIONS - 2.0L ECOBOOST™ Capacities

WARNING

The air conditioning refrigerant system contains refrigerant R-134a under high pressure. Only qualified personnel should service the air conditioning refrigerant system. Opening the air conditioning refrigerant system can cause personal injury.

319

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

E142732Capacities and Specifications

Item

Engine oil Engine coolant Brake fluid Rear differential (All Wheel Drive) fluid Power Transfer Unit (PTU) fluid (All Wheel Drive)

Capacity

5.7 qt (5.4 L) 8.9 qt (8.4 L)

Between MIN/MAX on brake fluid reservoir

2.4 pt (1.15L)

11.8 fl oz (0.35 L)

9.0 qt (8.5 L)

Automatic transmission fluid1
Windshield washer fluid Fuel tank (Front Wheel Drive) Fuel tank (All Wheel Drive) A/C refrigerant 5.2 fl oz (153.8 ml) A/C refrigerant compressor oil 1Approximate dry fill capacity. Actual amount may vary during fluid changes.

Fill as required 16.5 gal (62.5 L) 17.5 gal (66.2 L) 20 oz (0.56 kg)

Specifications Materials

Name Recommended motor oil (U.S.): Motorcraft SAE 5W-30 Premium Synthetic Blend Motor Oil XO-5W30-QSP Recommended motor oil (Canada): Motorcraft SAE 5W-30 Super Premium Motor Oil CXO-5W30-LSP12
Recommended motor oil (Mexico): Motorcraft SAE 5W-30 Synthetic Motor Oil MXO-5W30-QSP Optional motor oil (U.S. and Mexico): Motorcraft SAE 5W-30 Full Synthetic Motor Oil XO-5W30-QFS Optional motor oil (Canada):

Specification

WSS-M2C946-A

WSS-M2C946-A

WSS-M2C946-A

WSS-M2C946-A

WSS-M2C946-A

320

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

Capacities and Specifications

Name

Specification

Motorcraft SAE 5W-30 Synthetic Motor Oil CXO-5W30-LFS12
Engine coolant (U.S. and Mexico): Motorcraft Orange Antifreeze/Coolant Prediluted VC-3DIL-B Engine coolant (Canada): Motorcraft Orange Antifreeze/Coolant Prediluted CVC-3DIL-B Brake fluid: Motorcraft DOT 4 Low Viscosity (LV) High Performance Motor Vehicle Brake Fluid PM-20
Rear differential (All Wheel Drive) fluid: Motorcraft SAE 80W-90 Premium Rear Axle Lubricant XY-80W90-QL Power Transfer Unit (PTU) fluid (All Wheel Drive): Motorcraft SAE 75W-140 Synthetic Rear Axle Lubricant XY-75W140-QL Automatic transmission fluid (U.S. and Mexico): Motorcraft MERCON LV Automatic Transmission Fluid XT-10-QLVC Automatic transmission fluid (Canada): Motorcraft MERCON LV Automatic Transmission Fluid CXT-10-LV12
Windshield washer fluid (U.S. and Mexico): Motorcraft Premium Windshield Wash Concentrate with Bitterant ZC-32-B2
Windshield washer fluid (Canada): Motorcraft Premium Quality Windshield Washer Fluid CXC-37-(A, B, D, F) A/C refrigerant (U.S.): Motorcraft R-134a Refrigerant YN-19
A/C refrigerant (Canada): Motorcraft R-134a Refrigerant CYN-16-R

WSS-M97B44-D2

WSS-M97B44-D2

WSS-M6C65-A2

WSP-M2C197-A

WSL-M2C192-A

WSS-M2C938-A MERCON LV

WSS-M2C938-A MERCON LV

WSS-M14P19-A

WSS-M14P19-A

WSH-M17B19-A

WSH-M17B19-A

321

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

Capacities and Specifications

Specification

WSH-M17B19-A

WSH-M1C231-B

ESB-M1C93-B

--

--

--

An oil that displays this symbol conforms to current engine, emission system and fuel economy performance standards of the International Lubricants Specification Advisory Council (ILSAC). Do not use supplemental engine oil additives because they are unnecessary and could lead to engine damage that may not be covered by your vehicle warranty.

Name

A/C refrigerant (Mexico): Motorcraft R-134a Refrigerant MYN-19
A/C refrigerant compressor oil: Motorcraft PAG Refrigerant Compressor Oil YN-12-D Multi-purpose grease: Motorcraft Multi-Purpose Grease Spray XL-5
Lock cylinders (U.S.): Penetrating and Lock Lubricant XL-1
Lock cylinders (Canada): Penetrating Fluid CXC-51-A Lock cylinders (Mexico): Penetrating and Lock Lubricant MXL-1

If you use oil and fluids that do not meet the defined specification and viscosity grade, this may lead to: • Component damage which is not covered by the vehicle warranty. Longer engine cranking periods. Increased emission levels.

• • • Reduced engine performance. • Reduced fuel economy. • Degraded brake performance. We recommend Motorcraft motor oil for your vehicle. If Motorcraft oil is not available, use motor oils of the recommended viscosity grade that meet API SN requirements and display the API Certification Mark for gasoline engines. Do not use oil labeled with API SN service category unless the label also displays the API certification mark.

322

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

E142732Capacities and Specifications

Note: Automatic transmissions that require MERCON LV transmission fluid should only use MERCON LV transmission fluid. The use of any other fluid may cause transmission damage.

Note: Ford recommends using DOT 4 Low Viscosity (LV) High Performance Brake Fluid or equivalent meeting WSS-M6C65-A2. Use of any fluid other than the recommended fluid may cause degraded brake performance and not meet the Ford performance standards. Keep brake fluid clean and dry. Contamination with dirt, water, petroleum products or other materials may result in brake system damage and possible failure. CAPACITIES AND SPECIFICATIONS - 2.5L Capacities

WARNING

The air conditioning refrigerant system contains refrigerant R-134a under high pressure. Only qualified personnel should service the air conditioning refrigerant system. Opening the air conditioning refrigerant system can cause personal injury.

Item

Engine oil Engine coolant Brake fluid

Capacity

5.7 qt (5.4 L) 7.2 qt (6.8 L)

Between MIN/MAX on brake fluid reservoir

9.0 qt (8.5 L)

Automatic transmission fluid1
Windshield washer fluid Fuel tank A/C refrigerant A/C refrigerant (E100 engines) A/C refrigerant compressor oil 5.2 fl oz (153.8 ml) 1Approximate dry fill capacity. Actual amount may vary during fluid changes.

Fill as required 16.5 gal (62.5 L) 24 oz (0.68 kg) 20 oz (0.56 kg)

323

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

Capacities and Specifications

Specifications Materials

Name Recommended motor oil (U.S.): Motorcraft SAE 5W-20 Premium Synthetic Blend Motor Oil XO-5W20-QSP Recommended motor oil (Canada): Motorcraft SAE 5W-20 Super Premium Motor Oil CXO-5W20-LSP12
Recommended motor oil (Mexico): Motorcraft SAE 5W-20 Synthetic Motor Oil MXO-5W20-QSP Optional motor oil (U.S. and Mexico): Motorcraft SAE 5W-20 Full Synthetic Motor Oil XO-5W20-QFS Optional motor oil (Canada): Motorcraft SAE 5W-20 Synthetic Motor Oil CXO-5W20-LFS12
Engine coolant (U.S. and Mexico): Motorcraft Orange Antifreeze/Coolant Prediluted VC-3DIL-B Engine coolant (Canada): Motorcraft Orange Antifreeze/Coolant Prediluted CVC-3DIL-B Brake fluid: Motorcraft DOT 4 Low Viscosity (LV) High Performance Motor Vehicle Brake Fluid PM-20
Rear differential (All Wheel Drive) fluid: Motorcraft SAE 80W-90 Premium Rear Axle Lubricant XY-80W90-QL Power Transfer Unit (PTU) fluid (All Wheel Drive): Motorcraft SAE 75W-140 Synthetic Rear Axle Lubricant XY-75W140-QL Automatic transmission fluid (U.S. and Mexico): Motorcraft MERCON LV Automatic Transmission Fluid XT-10-QLVC

Specification

WSS-M2C945-A

WSS-M2C945-A

WSS-M2C945-A

WSS-M2C945-A

WSS-M2C945-A

WSS-M97B44-D2

WSS-M97B44-D2

WSS-M6C65-A2

WSP-M2C197-A

WSL-M2C192-A

WSS-M2C938-A MERCON LV

324

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

Capacities and Specifications

Name

Automatic transmission fluid (Canada): Motorcraft MERCON LV Automatic Transmission Fluid CXT-10-LV12
Windshield washer fluid (U.S. and Mexico): Motorcraft Premium Windshield Wash Concentrate with Bitterant ZC-32-B2
Windshield washer fluid (Canada): Motorcraft Premium Quality Windshield Washer Fluid CXC-37-(A, B, D, F) A/C refrigerant (U.S.): Motorcraft R-134a Refrigerant YN-19
A/C refrigerant (Canada): Motorcraft R-134a Refrigerant CYN-16-R A/C refrigerant (Mexico): Motorcraft R-134a Refrigerant MYN-19
A/C refrigerant compressor oil: Motorcraft PAG Refrigerant Compressor Oil YN-12-D Multi-purpose grease: Motorcraft Multi-Purpose Grease Spray XL-5
Lock cylinders (U.S.): Penetrating and Lock Lubricant XL-1
Lock cylinders (Canada): Penetrating Fluid CXC-51-A Lock cylinders (Mexico): Penetrating and Lock Lubricant MXL-1

Specification

WSS-M2C938-A MERCON LV

WSS-M14P19-A

WSS-M14P19-A

WSH-M17B19-A

WSH-M17B19-A

WSH-M17B19-A

WSH-M1C231-B

ESB-M1C93-B

--

--

--

325

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

Capacities and Specifications

If you use oil and fluids that do not meet the defined specification and viscosity grade, this may lead to: • Component damage which is not covered by the vehicle warranty. Longer engine cranking periods. Increased emission levels.

• • • Reduced engine performance. • Reduced fuel economy. • Degraded brake performance. We recommend Motorcraft motor oil for your vehicle. If Motorcraft oil is not available, use motor oils of the recommended viscosity grade that meet API SN requirements and display the API Certification Mark for gasoline engines. Do not use oil labeled with API SN service category unless the label also displays the API certification mark.

Note: Ford recommends using DOT 4 Low Viscosity (LV) High Performance Brake Fluid or equivalent meeting WSS-M6C65-A2. Use of any fluid other than the recommended fluid may cause degraded brake performance and not meet the Ford performance standards. Keep brake fluid clean and dry. Contamination with dirt, water, petroleum products or other materials may result in brake system damage and possible failure. Note: Automatic transmissions that require MERCON LV transmission fluid should only use MERCON LV transmission fluid. The use of any other fluid may cause transmission damage.

An oil that displays this symbol conforms to current engine, emission system and fuel economy performance standards of the International Lubricants Specification Advisory Council (ILSAC). Do not use supplemental engine oil additives because they are unnecessary and could lead to engine damage that may not be covered by your vehicle warranty.

326

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

E142732Audio System

GENERAL INFORMATION Radio Frequencies and Reception Factors

AM and FM frequencies are established by the Federal Communications Commission (FCC) and the Canadian Radio and Telecommunications Commission (CRTC). Those frequencies are: • AM: 530, 540-1700, 1710 kHz •

FM: 87.9-107.7, 107.9 MHz

Distance and strength

Terrain

Station overload

Radio Reception Factors

The further you travel from an AM or FM station, the weaker the signal and the weaker the reception. Hills, mountains, tall buildings, bridges, tunnels, freeway overpasses, parking garages, dense tree foliage and thunderstorms can interfere with the reception. When you pass a ground-based broadcast repeating tower, a stronger signal may overtake a weaker one and result in the audio system muting.

Do not expose discs to direct sunlight or heat sources for extended periods. MP3 Track and Folder Structure Audio systems capable of recognizing and playing MP3 individual tracks and folder structures work as follows: •

There are two different modes for MP3
disc playback: MP3 track mode (system default) and MP3 folder mode.

• MP3 track mode ignores any folder

structure on the MP3 disc. The player numbers each MP3 track on the disc (noted by the .mp3 file extension) from T001 to a maximum of T255. The maximum number of playable MP3
files may be less depending on the structure of the CD and exact model of radio present.

CD and CD Player Information Note: CD units play commercially pressed 4.75-inch (12 centimeter) audio compact discs only. Due to technical incompatibility, certain recordable and re-recordable compact discs may not function correctly when used in Ford CD players. Note: Do not insert CDs with homemade paper (adhesive) labels into the CD player as the label may peel and cause the CD to become jammed. You should use a permanent felt tip marker rather than adhesive labels on your homemade CDs. Ballpoint pens may damage CDs. Please contact an authorized dealer for further information. Note: Do not use any irregularly shaped discs or discs with a scratch protection film attached. Always handle discs by their edges only. Clean the disc with an approved CD cleaner only. Wipe it from the center of the disc toward the edge. Do not clean in a circular motion.

327

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

Audio System

AUDIO UNIT - VEHICLES WITH: AM/FM/CD/SYNC WARNING

Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle. We recommend against the use of any hand-held device while driving and encourage the use of voice-operated systems when possible. Make sure you are aware of all applicable local laws that may affect the use of electronic devices while driving.

Note: Depending on your vehicle option package, your system may look different from what you see here.

• MP3 folder mode represents a folder

structure consisting of one level of folders. The CD player numbers all MP3
tracks on the disc (noted by the .mp3
file extension) and all folders containing MP3 files, from F001
(folder) T001 (track) to F253 T255. • Creating discs with only one level of

folders helps with navigation through the disc files.

If you are burning your own MP3 discs, it is important to understand how the system reads the structures you create. While various files may be present, (files with extensions other than mp3), only files with the .mp3 extension are played; other files are ignored by the system. This enables you to use the same MP3 disc for a variety of tasks on your work computer, home computer and your in-vehicle system. In track mode, the system displays and plays the structure as if it were only one level deep (all .mp3 files play, regardless of being in a specific folder). In folder mode, the system only plays the .mp3 files in the current folder.

328

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

E185815Audio System

VOL and Power: Press this button to turn the system off and on. Turn it to adjust the volume. CD slot: Insert a CD. TUNE: Turn to search the frequency in individual increments. Seek: In radio mode, select a frequency and press this button. The system stops at the first station up the band. Press and hold the button to move quickly to the next strong radio station. In CD mode, press this button to select the next track. Press and hold the button to move quickly forward through the current track. Eject: Press this button to eject a CD. Seek: In radio mode, select a frequency and press this button. The system stops at the first station down the band. Press and hold the button to move quickly to the previous strong radio station. In CD mode, press this button to select the previous track. Press and hold the button to move quickly backward through the current track.

Note: Depending on your vehicle option package, your system may look different from what you see here. Note: Some features, such as Sirius satellite radio, may not be available in your location. Check with an authorized dealer.

AUDIO UNIT - VEHICLES WITH: AM/FM/CD/SYNC/SATELLITE RADIO

WARNING

Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle. We recommend against the use of any hand-held device while driving and encourage the use of voice-operated systems when possible. Make sure you are aware of all applicable local laws that may affect the use of electronic devices while driving.

329

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

Audio System

CD: Press this button to listen to a CD. Press the function buttons below the radio screen to select on-screen options of Repeat or Shuffle. SOUND: Press this button to access settings for Treble, Midrange, Bass, Fade and Balance. Use the up and down arrow buttons to select the various settings. When you make your selection, press the left and right arrow buttons to change the settings. Press OK to set or press MENU to exit. Sound settings can be set for each audio source independently. Display screen: Shows audio and SYNC information. Number block: In radio mode, store your favorite stations for later access. When tuned to any station, press and hold a preset button until sound returns. In CD mode, press a button to select a track. In phone mode, press the buttons to enter a phone number. Function buttons: Select different functions of the audio system depending on which mode you are in (such as Radio mode or CD mode). TUNE: Turn to search the frequency band in individual increments. Eject: Press this button to eject a CD.

330

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

E144488Audio System

Seek: In radio mode, select a frequency band and press this button. The system stops at the first station up the band. Press and hold the button to move quickly to the next strong radio station or memory preset. In CD mode, press this button to select the next track. Press and hold the button to move quickly forward through the current track. End phone call: Press this button to end a phone call. Cursor arrows and OK: Use the up and down arrow buttons to select the various settings. When you make your selection, press the left and right arrow buttons to change the settings. Press OK to set or press MENU to exit. CD slot: Insert a CD. Pick-up or Make phone call: Press this button to either pick-up an incoming phone call or to make a phone call. Seek: In radio mode, select a frequency band and press this button. The system stops at the first station down the band. Press and hold the button to move quickly to the previous strong radio station or memory preset. In CD mode, press this button to select the previous track. Press and hold the button to move quickly backward through the current track. Play/Pause: Press to either play or pause a track when listening to a CD. VOL and Power: Press this button to turn the system off and on. Turn it to adjust the volume. PHONE: Press this button to access the phone features of the SYNC® system. See SYNC™ (page 341). MENU: Press this button to access different audio system features. See Menu Structure later in this section. MEDIA: Press this button to access your auxiliary input jack or switch between devices you plug into the input jack or USB port. Clock: Press this button to access the clock setting. Use the center arrow controls to change the hours and minutes. You can also set the clock by pressing the MENU button and scrolling to Clock Settings. RADIO: Press this button to listen to the radio or change radio frequencies bands. Press the function buttons below the radio screen to select different radio functions. SIRIUS or MUTE: If your vehicle is equipped with Sirius satellite radio, press this button to listen to Sirius satellite radio. If your vehicle is not equipped with Sirius satellite radio, press the button to mute the playing media.

331

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

Audio System

Note: The MyFord Touch system controls most of the audio features. See MyFord Touch™ (page 386).

AUDIO UNIT - VEHICLES WITH: SONY AM/FM/CD WARNING

Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle. We recommend against the use of any hand-held device while driving and encourage the use of voice-operated systems when possible. Make sure you are aware of all applicable local laws that may affect the use of electronic devices while driving.

SOUND: Press this button to access settings for Treble, Midrange, Bass, Fade or Balance. CD slot: Insert a CD.

332

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

E207196Audio System

Eject: Press this button to eject a CD. TUNE: Press these buttons to search the frequency bands in individual increments. VOL: Turn the control to adjust the volume. Press the button to switch the system on and off. SEEK: In radio mode, select a frequency band and press one of these buttons. The system stops at the first station it finds in that direction. Press and hold one of these buttons to move quickly in that direction to the next strong radio station or memory preset. In CD mode, press one of these buttons to select the previous or next track. Press and hold one of these buttons to move quickly in that direction within the current track.

Menu Structure Note: Depending on your system, some options may appear slightly different. Press MENU.

Press the up and down arrow buttons to scroll through the options. Press the right arrow to enter a menu. Press the left arrow to exit a menu. Press OK to confirm a selection.

Manual tune

Scan AST

PTY/Set Category

RBDS/RDS

Radio

Use the left and right arrows to go up or down the frequency band. Select for a brief sampling of all available channels. Select to store the six strongest local stations on the AM- AST and FM-AST frequency bands. Select to have the system search by certain music categories (such as Rock, Pop or Country). Select to view additional broadcast data, if available. This feature defaults to off. RBDS must be on for you to set a category.

333

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

Audio System

SIRIUS

Select for a brief sampling of all available channels. Select to view your satellite radio electronic serial number (ESN). You will need this number when communicating with Sirius to activate, modify or track your account. Select to view available satellite radio channels. Press OK to open a list of the following options for this channel: Tune Channel, Skip Channel or Lock Channel. Once you skip or lock a channel, you can only access it by pressing Direct and entering the channel number. Locking or unlocking a channel requires your PIN. Select to view channel categories (such as Pop, Rock or News). If you select a category, seek and scan functions only stop on channels in that category. Select to turn off or turn on alerts for songs, artists or teams. The system alerts you when the selection is playing on another channel. Save up to 20 alerts. Use your PIN to unlock previously locked stations. Use to restore any channels you previously skipped. Select to create a PIN, which allows you to lock or unlock channels. Your initial PIN is 1234.

Audio Settings

Automatically adjusts the volume to compensate for speed and wind noise. You can set the system between 0 and +7. Select to adjust settings for Treble, Midrange, Bass, Fade or Balance. Select to optimize sound quality for the chosen seating position. Select to view additional broadcast data, if available. This feature defaults to off. RBDS must be on for you to set a category. Choose between the stereo modes.

Scan Show ESN

Channel Guide

Set Category

Alerts

Unlock All Stations Skip No stations Parental Lock (PIN)

Speed Compensated Volume

Sound

Occupancy Mode

RBDS/RDS Text

DSP

334

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

Audio System

CD Settings

Select to scan all disc selections. Select to scan all music in the current MP3 folder. Select to bring soft and loud passages together for a more consistent listening level.

Clock Settings Select to set the time. Select to set the calendar date. Select to view clock time in a 12-hour mode or 24-hour mode.

Display Settings

Select to change display brightness. Select to display the language in English, French or Spanish. Select to display the outside temperature in Fahrenheit or Celsius.

Scan All Scan Folder CD Compression

Set Time Set Date 24h Mode

Dimming Language

Temp. setting

DIGITAL RADIO Note: HD Radio broadcasts are not available in all markets. HD Radio technology is the digital evolution of analog AM/FM radio. Your system has a special receiver that allows it to receive digital broadcasts (where available) in addition to the analog broadcasts, it already receives. Digital broadcasts provide a better sound quality

than analog broadcasts with free, crystal-clear audio and no static or distortion. For more information, and a guide to available stations and programming, please visit www.hdradio.com. When HD Radio is on and you tune to a station broadcasting HD Radio technology, you may notice the HD Radio logo on your screen. When this logo is available, you may also see Title and Artist fields on-screen.

335

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

Audio System

The multicast indicator appears in FM mode (only) if the current station is broadcasting multiple digital broadcasts. The highlighted numbers signify available digital channels where new or different content is available. HD1 signifies the main programming status and is available in analog and digital broadcasts. Other multicast stations (HD2 through HD7) are only available digitally.

When HD Radio broadcasts are active, you can access the following functions: • Scan allows you to hear a brief

sampling of all available stations. This feature still works when HD Radio reception is on, although it does not scan for HD2-HD7 channels. You may see the HD logo appear if the station has a digital broadcast.

• Memory presets allow you to save an active channel as a memory preset. Touch and hold a memory preset slot until the sound returns. There is a brief mute while the radio saves the station. Sound returns when finished. When switching to an HD2 or HD3 memory preset, the sound mutes before the digital audio plays, because the system has to reacquire the digital signal.

Note: As with any saved radio station, you cannot access the saved station if your vehicle is outside the station’s reception area.

HD Radio Reception and Station Troubleshooting

Reception area

Station blending

Potential reception issues If you are listening to a multicast station and you are on the fringe of the reception area, the station may mute due to weak signal strength. If you are listening to HD1, the system switches back to the analog broadcast until the digital broadcast is available again. However, if you are listening to any of the possible HD2-HD7 multicast channels, the station mutes and stays muted unless it is able to connect to the digital signal again. When the system first receives a station (aside from HD2- HD7 multicast stations), it first plays the station in the analog version. Once the receiver verifies the station is an HD Radio station, it shifts to the digital version. Depending on the station quality, you may hear a slight sound change when the station changes from analog to digital. Blending is the shift from analog to digital sound or digital back to analog sound.

336

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

Audio System

In order to provide the best possible experience, use the contact form to report any station issues found while listening to a station broadcasting with HD Radio

technology. Independent entities own and operate each station. These stations are responsible for ensuring all audio streams and data fields are accurate.

Potential station issues

Issues

Cause

Action

This is poor time alignment by the radio broadcaster.

No action required. This is a broadcast issue.

Echo, stutter, skip or repeat in audio. Increase or decrease in audio volume. Sound fading or blending in and out.

There is an audio mute delay when selecting HD2 or HD3, multicast preset or Direct Tune.

Cannot access HD2 or HD3
multicast channel when recalling a preset or from a direct tune. Text information does not match currently playing audio.

There is no text information shown for currently selected frequency.

The radio is shifting between analog and digital audio.

The digital multicast is not available until the HD Radio broadcast is decoded. Once decoded, the audio is avail- able. The previously stored multicast preset or direct tune is not available in your current reception area. Data service issue by the radio broadcaster.

Data service issue by the radio broadcaster.

No action required. The reception issue may clear up as you continue to drive. No action required. This is normal behavior. Wait until the audio is available.

No action required. The station is not available in your current location.

Fill out the station issue form at website listed below.* Fill out the station issue form at website listed below.* No action required. This is normal behavior.

HD2-HD7 stations not found when Scan is pressed. * http://www.ibiquity.com/automotive/report_radio_station_experiences

Pressing Scan disables HD2-HD7 channel search.

337

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

Audio System

HD Radio Technology manufactured under license from iBiquity Digital Corp. U.S. and foreign patents. HD Radio and the HD and HD Radio logos are proprietary trademarks of iBiquity Digital Corp. Ford Motor Company and iBiquity Digital Corp. are not responsible for the content sent using HD Radio technology. Content may be changed, added or deleted at any time at the station owner's discretion.

SATELLITE RADIO (If Equipped) SIRIUS® broadcasts a variety of music, news, sports, weather, traffic and entertainment satellite radio channels. For more information and a complete list of SIRIUS satellite radio channels, visit www.siriusxm.com in the United States, www.sirius.ca in Canada, or call SIRIUS at 1-888-539-7474. Note: This receiver includes the eCos real-time operating system. eCos is published under the eCos License.

Satellite Radio Reception Factors

Potential satellite radio reception issues

Antenna obstructions

Terrain

Station overload

Satellite radio signal interfer- ence

For optimal reception performance, keep the antenna clear of snow and ice build-up and keep luggage and other material as far away from the antenna as possible. Hills, mountains, tall buildings, bridges, tunnels, freeway overpasses, parking garages, dense tree foliage and thunderstorms can interfere with your reception. When you pass a ground-based broadcast-repeating tower, a stronger signal may overtake a weaker one and the audio system may mute. Your display may show ACQUIRING . . . to indicate the interference and the audio system may mute.

SIRIUS® Satellite Radio Service Note: SIRIUS reserves the unrestricted right to change, rearrange, add or delete programming including canceling, moving or adding particular channels, and its prices, at any time, with or without notice to you. Ford Motor Company shall not be responsible for any such programming changes.

338

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

E142593Audio System

SIRIUS satellite radio is a subscription-based satellite radio service that broadcasts a variety of music, sports, news, weather, traffic and entertainment programming. Your factory-installed SIRIUS satellite radio system includes hardware and a limited subscription term, which begins on the date of sale or lease of your vehicle. See an authorized dealer for availability.

For more information on extended subscription terms (a service fee is required), the online media player and a complete list of SIRIUS satellite radio channels, and other features, please visit www.siriusxm.com in the United States, www.sirius.ca in Canada, or call SIRIUS at 1-888-539-7474. Satellite Radio Electronic Serial Number (ESN) You need your ESN to activate, modify or track your satellite radio account. When in satellite radio mode, press Options.

Troubleshooting Message

Acquiring…

Satellite antenna fault SIRIUS system failure

Condition

Action

Radio requires more than two seconds to produce audio for the selected channel. There is an internal module or system failure present.

No action required. This message should disappear shortly.

If this message does not clear shortly, or with an igni- tion key cycle, your receiver may have a fault. See an authorized dealer for service. Tune to another channel or choose another preset. Contact SIRIUS at 1-888- 539-7474 to subscribe to the channel, or tune to another channel. The signal is blocked. When you move into an open area, the signal should return.

No action required. The process may take up to three minutes.

Invalid Channel

Unsubscribed Channel

The channel is no longer available. Your subscription does not include this channel.

No Signal

Updating…

The signal is lost from the SIRIUS satellite or SIRIUS tower to your vehicle antenna. Update of channel programming in progress.

339

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

Audio System

Message

Questions? Call 1-888-539-7474

None found Check Channel Guide

Subscription Updated

Condition

Action

Your satellite service is no longer available.

All the channels in the selected category are either skipped or locked. SIRIUS has updated the channels available for your vehicle.

Contact SIRIUS at 1-888- 539-7474 to resolve subscription issues. Use the channel guide to turn off the Lock or Skip function on that station. No action required.

USB PORT (If Equipped)

USB Port SD card slot

The USB port allows you to plug in media playing devices, memory sticks and charge devices (if supported). See Using SYNC™ With Your Media Player (page 367). MEDIA HUB (If Equipped) The media hub is located in the center console or in front of the gear shift.

340

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

E176344E194341SYNC™

GENERAL INFORMATION

SYNC is an in-vehicle communications system that works with your Bluetooth-enabled cellular phone and portable media player. This allows you to: • Make and receive calls. • Access and play music from your

portable music player.

• Use 911 Assist, Vehicle Health Report and SYNC Services (Traffic, Directions & Information).*

• Use applications, such as Pandora and

Stitcher, via SYNC AppLink.**

• Access phonebook contacts and music

using voice commands. Stream music from your connected phone. Text message.

•

•

• Use the advanced voice recognition

system.

• Charge your USB device (if your device

supports this).

*These features are not available in all markets and require activation. **Available AppLink enabled apps vary by market. Make sure that you review your device's manual before using it with SYNC. Support The SYNC support team is available to help you with any questions you cannot answer on your own. Monday-Saturday, 8:30am-9:00pm EST. Sunday, 10:30am-7:30pm EST.

341

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

E198355SYNC™

When using SYNC: • Do not operate playing devices if the

power cords or cables are broken, split or damaged. Place cords and cables out of the way, so they do not interfere with the operation of pedals, seats, compartments or safe driving abilities.

• Do not leave playing devices in your

vehicle during extreme conditions as it could cause them damage. See your device's manual for further information. • Do not attempt to service or repair the

system. See an authorized dealer.

Privacy Information When a cellular phone is connected to SYNC, the system creates a profile within your vehicle that is linked to that cellular phone. This profile is created in order to offer you more cellular features and to operate more efficiently. Among other things, this profile may contain data about your cellular phone book, text messages (read and unread), and call history, including history of calls when your cellular phone was not connected to the system. In addition, if you connect a media device, the system creates and retains an index of supported media content. The system also records a short development log of approximately 10 minutes of all recent system activity. The log profile and other system data may be used to improve the system and help diagnose any problems that may occur. The cellular profile, media device index, and development log will remain in the vehicle unless you delete them and are generally accessible only in the vehicle when the cellular phone or media player is connected. If you no longer plan to use the system or the vehicle, we recommend you perform a Master Reset to erase all stored information.

In the United States, call 1-800-392-3673. In Canada, call 1-800-565-3673. Times are subject to change due to holidays. SYNC Owner Account Why do I need a SYNC owner account? • Required to activate Vehicle Health

Report and to view the reports online.

• Required to activate the

subscription-based SYNC Services and to personalize your Saved Points and Favorites. Essential for keeping up with the latest software downloads available for SYNC.

•

• Access to customer support for any

questions you may have.

Driving Restrictions For your safety, certain features are speed-dependent and restricted when your vehicle is traveling over 3 mph (5 km/h). Safety Information

WARNING

Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle. We recommend against the use of any hand-held device while driving and encourage the use of voice-operated systems when possible. Make sure you are aware of all applicable local laws that may affect the use of electronic devices while driving.

342

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

SYNC™

System data cannot be accessed without special equipment and access to the vehicle's SYNC module. Ford Motor Company and Ford of Canada will not access the system data for any purpose other than as described absent consent, a court order, or where required by law enforcement, other government authorities, or other third parties acting with lawful authority. Other parties may seek to access the information independently of Ford Motor Company and Ford of Canada. For further privacy information, see the sections on 911 Assist, Vehicle Health Report, and Traffic, Directions and Information. USING VOICE RECOGNITION This system helps you control many features using voice commands. This allows you to keep your hands on the wheel and focus on what is in front of you.

Helpful Hints • Make sure the interior of your vehicle is as quiet as possible. Wind noise from open windows and road vibrations may prevent the system from correctly recognizing spoken commands.

• After pressing the voice button, wait

until after the tone sounds and Listening appears before saying a command. Any command spoken before this does not register with the system. Speak naturally, without long pauses between words.

•

• At any time, you can interrupt the

system while it is speaking by pressing the voice button.

Initiating a Voice Session

Initiate a voice session by pressing the voice button on the steering wheel controls. See

Voice Control (page 72).

When prompted you can say any of the following:

Voice command

If you want the system to carry out the following

Bluetooth Audio Cancel Line In | Aux | Audio In mobile (apps | applica- tions) Phone USB [1] Vehicle Health (Report)

Stream audio from your phone. Cancel the requested action. Access the device connected to the auxiliary input jack. Access mobile applications.

Make calls. Access the device connected to your USB port. Run a vehicle health report.

343

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

E142599SYNC™

If you want the system to carry out the following

Adjust the level of voice interaction and feedback.

Voice command Voice Settings | Voice Preferences Help Hear a list of voice commands available in the current mode. You can say any of the voice commands that appear within open and close brackets that are separated by |. For example, where (cancel | stop | exit) appears you say; cancel or stop or exit. You must say any of the voice commands that appear outside of open and close brackets. For example, where mobile (apps | applications) appears, you must say mobile followed by either apps or applications. You do not need to say words that appear within square brackets. For example, for where (USB [stick] | iPOD | MP3 [player]) appears, you can say USB or USB stick. Note: Mobile Applications, Services and Vehicle health report, is only available in the United States of America.

System Interaction and Feedback The system provides feedback through audible tones, prompts, questions and spoken confirmations depending on the situation and the chosen level of interaction (voice settings). You can customize the voice recognition system to provide more or less instruction and feedback.

When prompted say the following:

The default setting is to a higher level of interaction in order to help you learn to use the system. You can change these settings at any time. Adjusting the Interaction Level Initiate a voice session by pressing the voice button on the steering wheel controls. See

Voice Control (page 72).

Voice command

If you want the system to carry out the following

Voice Settings | Voice Preferences Followed by either of the following: Interaction Mode Standard Interaction Mode Advanced The system defaults to the standard interaction mode.

Provide more detailed interaction and guidance.

Provide less audible interaction and more tone prompts.

344

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

E142599SYNC™

Confirmation prompts are short questions the system asks when it is not sure of your request or when there are multiple possible responses to your request. For example, the system may ask "Phone, is that

correct?". If turned off, the system simply makes a best guess as to what you requested and may ask you to confirm settings.

Voice command

If you want the system to carry out the following

Confirmation Prompts Off Confirmation Prompts On

Make a best guess from the command; you may still occa- sionally be asked to confirm settings. Clarify your voice command with a short question.

The system creates candidate lists when it has the same confidence level of several options based on your voice command. When turned on, it may prompt you with as many as four possibilities for clarification.

For example, say "Say 1 after the tone to call John Doe at home. Say 2 after the tone to call Johnny Doe on mobile. Say 3 after the tone to call Jane Doe at home." You could also say "Say 1 after the tone to play John Doe, Say 2 after the tone to play Johnny Doe."

Voice command

If you want the system to carry out the following

Media Candidate Lists Off Media Candidate Lists On Phone Candidate Lists Off Phone Candidate Lists On

Make a best guess from the media candidate list. You may still occasionally be asked questions. Clarify your voice command for media candidates. Make a best guess from the phone candidate list. You may still occasionally be asked questions. Clarify your voice command for phone candidates.

345

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

SYNC™

USING SYNC™ WITH YOUR PHONE Hands-free calling is one of the main features of SYNC. While the system supports a variety of features, many are dependent on your cell phone's functionality. At a minimum, most cell phones with Bluetooth wireless technology support the following functions: • Answering an incoming call. • • Using privacy mode. • Dialing a number. • Redialing. • Call waiting notification. • Caller ID.

Ending a call.

Other features, such as text messaging using Bluetooth and automatic phonebook download, are cell phone-dependent features. To check your cell phone's compatibility, see your cell phone's manual and visit www.SYNCMyRide.com, www.SYNCMyRide.ca or www.syncmaroute.ca. Pairing a Cell Phone for the First Time Note: SYNC can support downloading up to approximately 1000 entries per Bluetooth-enabled cell phone. Note: Make sure to switch on the ignition and the radio. Put the transmission in position park (P) (automatic transmission) or neutral with the parking brake applied (manual transmission). Note: To scroll through the menus, press the up and down arrows on your audio system. Wirelessly pairing your cell phone with SYNC allows you to make and receive hands-free calls.

Press the phone button. When the display indicates there is no cell phone paired, do the following: Message No Phone Paired Find SYNC

Press the OK button. 1. Press the OK button. 2. Put your cell phone into Bluetooth discovery mode. See

Action and Description

your device's manual if necessary.

3. When prompted on your cell phone's display, enter the six-digit PIN provided by SYNC in the radio display. The display indicates when the pairing is successful.

346

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

SYNC™

Depending on your cell phone's capability and your market, the system may prompt you with questions, such as setting the current cell phone as the primary cell phone (the cell phone SYNC automatically tries to connect with first upon vehicle start-up) and downloading your phonebook.

Press the phone button, then scroll to:

Pairing Subsequent Cell Phones Note: To scroll through the menus, press the up and down arrows on your audio system. Note: Make sure to switch on the ignition and the radio. Put the transmission in position park (P) (automatic transmission) or neutral with the parking brake applied (manual transmission).

Message

Phone settings Bluetooth device Add

Find SYNC

Action

Press the OK button. Press the OK button. Press the OK button. When the following message appears in the display. 1. Press the OK button. 2. Put your cell phone into Bluetooth discovery mode. See

your device's manual if necessary.

3. When prompted on your cell phone's display, enter the six-digit PIN provided by SYNC in the radio display. The display indicates when the pairing is successful.

The system then prompts with questions, such as if you would like to set the current cell phone as the primary cell phone (the cell phone SYNC automatically tries to connect with first upon vehicle start-up) or download your phonebook.

Phone Voice Commands Press the voice icon and say:

Voice Commands

Phone You can then say any of the following commands. Call History Incoming Call History Missed Call History Outgoing

Voice Commands

Phonebook ___ Phonebook ___ at Home Phonebook ___ at Work Phonebook ___ in Office Phonebook ___ on Cell

___ is a dynamic listing that should be the name of a contact in your phonebook. For example you could say "Call Mom".

347

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

SYNC™

Voice Command

[Phone] Settings [Message] Notification On [Phone] Settings [Message] Notification Off [Phone] Settings [Set] Phone Ringer [Phone] Settings [Set] Ringer 1
[Phone] Settings [Set] Ringer 2
[Phone] Settings [Set] Ringer 3
[Phone] Settings [Set] Ringer Off Battery Phone Name Signal Text Message Inbox Send [New] Text Message You do not need to say word contained within brackets for the system to understand your command. Note: To exit dial mode, press and hold the phone button or press MENU to go to the PHONE menu. Phonebook Commands When you ask SYNC to access content, for example the phonebook name or number, the requested information appears in the display to view.

You can also say any of the following:

Voice Command

Call ___ Call ___ at Home Call ___ at Work Call ___ in Office Call ___ on Mobile Call ___ on Other Dial None of these commands are available until your cell phone information is completely downloaded using Bluetooth. ___ is a dynamic listing that should be the name of a contact in your phonebook. For example you could say "Call Mom". The following commands are only available during active calls:

Voice Commands

Go To Privacy Hold Join Phone Menu Commands To access the phone menu with voice commands, press the voice button and when prompted say:

Voice Command

[Phone] Menu You can then say any of the following: [Phone] Connections | [Media] Connec- tions | [Bluetooth] Connections

348

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

SYNC™

Making a Call Press the voice button and when prompted say:

Action and Description

Voice Command

Call ___

This command is not available until your cell phone informa- tion is completely downloaded using Bluetooth. Use to enter a phone number digit by digit.

Dial When the system confirms the number say one of the following commands: Dial delete

To confirm the number and initiate the call. To erase the last spoken digit. You can also press the left arrow button. To erase all spoken digits. You can also press and hold the left arrow button.