2007 Ford E 250 Owners Manual

’

Maintenance and Specifications

248

—

—

–

–

–

–

–

2007 Econoline (eco) Owners Guide (post-2002-fmt) USA (fus)

Maintenance and Specifications

威

威

威 威

威

威

威

’

249

2007 Econoline (eco) Owners Guide (post-2002-fmt) USA (fus)

Maintenance and Specifications

4.6L V8 engine 5.4L V8 engine 6.8L V10 engine

1-3-7-2-6-5-4-8
Coil on plug

330
87 octane 1-3-7-2-6-5-4-8
Coil on plug

ENGINE DATA Engine* Cubic inches 281
Required fuel 87 octane Firing order Ignition system Spark plug gap Compression ratio *Refer to the Power Stroke Direct Injection Turbo Diesel Owner’s Guide Supplement for diesel engine information.

0.052–0.056 inch (1.32–1.42mm) 9.4:1

0.052–0.056 inch (1.32–1.42mm) 9.0:1

0.052–0.056 inch (1.32–1.42mm) 9.0:1

415
87 octane 1-6-5-10-2-7-3-8-4-9
Coil on plug

Engine drivebelt routing

• 4.6L V8 and 5.4L V8 Engines without A/C

250

2007 Econoline (eco) Owners Guide (post-2002-fmt) USA (fus)

Maintenance and Specifications

• 4.6L V8 and 5.4L V8 Engines with A/C

• 6.8L V10 Engine

VEHICLE IDENTIFICATION NUMBER

Complete Ford built vehicles The vehicle identification number is attached to your vehicle in the following places: • The top of the instrument panel on the driver’s side. • On the certification label. This label is required by the National Highway Traffic Safety Administration and is made of special material. If it is tampered with, it will be destroyed or a destruction pattern will appear.

251

2007 Econoline (eco) Owners Guide (post-2002-fmt) USA (fus)

Maintenance and Specifications

The Vehicle Identification Number (VIN) contains the following information: 1. World manufacturer identifier 2. Brake system / Gross Vehicle Weight Rating (GVWR) / Restraint System 3. Vehicle line, series, body type 4. Engine type 5. Check digit 6. Model year 7. Assembly plant 8. Production sequence number

Certification label for incomplete vehicles On completed derivations of incomplete vehicles, the certification label is affixed at a location determined by a subsequent stage manufacturer of the completed vehicle. In these cases the completed vehicle is manufactured in two or more stages by two or more separate manufacturers.

252

2007 Econoline (eco) Owners Guide (post-2002-fmt) USA (fus)

Maintenance and Specifications

TRANSMISSION/TRANSAXLE CODE DESIGNATIONS You can find a transmission/transaxle code on the Safety Compliance Certification Label. The following table tells you which transmission or transaxle each code represents.

Description Five-speed automatic TorqShift-diesel engine with overdrive cancel Four-speed automatic overdrive (4R75E) Five-speed automatic TorqShift-gasoline engine with Tow/Haul

Code

253