2013 Chevrolet Cruze Owners Manual

CD: Selects tracks.

18. Y

Removes a disc from the CD slot.

Controls The infotainment system is operated by using the pushbuttons, multifunction knobs, menus shown on the display, and steering wheel controls, if equipped. Turning the System On or Off O (Volume/Power): Press to turn the system on and off.

Automatic Switch-Off If the infotainment system has been turned on after the ignition is turned off, the system will turn off automatically after 10 minutes. Volume Control O (Volume/Power): Turn to adjust the volume. 5 / > (Phone/Mute): Press 5 / > to mute the infotainment system. Press 5 / > again, or turn the O knob to cancel mute.

Chevrolet Cruze Owner Manual - 2013 - crc - 10/16/12

Black plate (5,1)

Menu System The menu system appears on the display screen.

Controls The MENU/SEL knob and the BACK button are used to navigate the menu system. MENU/SEL Knob: Press to: . Enter the menu system. . Select or activate the highlighted

menu option.

. Confirm a set value.

Turn a system setting on or off.

Turn to: . Highlight a menu option. . Select a value.

BACK: Press to: . Exit a menu. . Return from a submenu screen

to the previous menu screen. . Delete the last character in a

sequence.

Selecting a Menu Option

1. Turn the MENU/SEL knob to

move the highlighted bar.

2. Press the MENU/SEL knob to select the highlighted option.

Submenus An arrow on the right-hand edge of the menu indicates that it has a submenu with other options.

Infotainment System 7-5

Activating a Setting

1. Turn the MENU/SEL knob to

highlight the setting.

2. Press the MENU/SEL knob to

activate the setting.

Setting a Value

1. Turn the MENU/SEL knob to

change the current value of the setting.

2. Press the MENU/SEL knob to

confirm the setting.

Chevrolet Cruze Owner Manual - 2013 - crc - 10/16/12

Black plate (6,1)

7-6

Infotainment System

Turning a Function On or Off

1. Turn the MENU/SEL knob to

highlight the function.

2. Press the MENU/SEL knob to

turn the function on or off.

Entering a Character Sequence

1. Turn the MENU/SEL knob to

highlight the character.

2. Press the MENU/SEL knob to

select the character.

Press the BACK button to delete the last character in the sequence or press and hold to delete the entire character sequence. Audio Settings The audio settings can be set for each radio band and each audio player source. To quickly reset an audio setting value to 0: 1. Press the TONE button. 2. Select the audio setting. 3. Press and hold the MENU/SEL button until the value changes to 0.

Press the BACK button to go back to the Tone Settings menu.

Adjusting the Treble, Midrange, and Bass 1. Press the TONE button. 2. Select Treble, Midrange,

or Bass.

3. Select the value.

Press the BACK button to go back to the Tone Settings menu.

Adjusting the Fader and Balance 1. Press the TONE button. 2. Select Fader or Balance. 3. Select the value. Press the BACK button to go back to the Tone Settings menu.

Adjusting the EQ (Equalizer) For vehicles that have an equalizer: 1. Press the TONE button. 2. Select EQ presets. 3. Select the setting. Press the BACK button to go back to the Tone Settings menu.

Chevrolet Cruze Owner Manual - 2013 - crc - 10/16/12

Black plate (7,1)

System Settings

Configuring the Number of Favorite Pages To configure the number of available favorite pages: 1. Press the CONFIG button. 2. Select Radio Settings. 3. Select Radio Favorites. 4. Select the number of available

favorite pages.

5. Press the BACK button to go

back to the System Configuration menu.

Auto Volume The auto volume feature automatically adjusts the radio volume to compensate for road and wind noise as the vehicle speeds up or slows down, so that the volume level is consistent.

The level of volume compensation can be selected, or the auto volume feature can be turned off. 1. Press the CONFIG button. 2. Select Radio Settings. 3. Select Auto Volume. 4. Select the setting. 5. Press the BACK button to go

back to the System Configuration menu.

Maximum Startup Volume The maximum volume played when the radio is first turned on can be set. 1. Press the CONFIG button. 2. Select Radio Settings. 3. Select Maximum Startup

Volume.

4. Select the setting. 5. Press the BACK button to go

back to the System Configuration menu.

Infotainment System 7-7

Radio

AM-FM Radio

Control Buttons The buttons used to control the radio are: BAND: Press to turn the radio on and choose between AM, FM, and SiriusXM®, if equipped. MENU/SEL: Turn to navigate the available menus and to search for stations. INFO: Press to display additional information that may be available for the current song. g or l : Press to search for stations. FAV: Press to open the favorites list and select the favorites page. 1 to 6: Press to select preset stations. AS (Autostore): Press to open the autostore list.

Chevrolet Cruze Owner Manual - 2013 - crc - 10/16/12

Black plate (8,1)

7-8

Infotainment System

RDS (Radio Data System) The radio may have RDS. The RDS feature is available for use only on FM stations that broadcast RDS information. This feature only works when the information from the radio station is available. In rare cases, a radio station could broadcast incorrect information that causes the radio features to work improperly. If this happens, contact the radio station. While the radio is tuned to an FM-RDS station, the station name or call letters display. Radio Menus Radio menus are available for AM and FM. Turn the MENU/SEL knob to open the main radio menu for that band. Selecting a Band Press the BAND button to choose AM, FM, or SiriusXM, if equipped. The last station that was playing starts playing again.

Selecting a Station

Seek Tuning If the radio station is not known: Briefly press g or l to automatically search for the next available station. If a station is not found, the radio switches to a more sensitive search level. If a station still is not found, the frequency that was last active begins to play. If the radio station is known: Press and hold g or l until the station on the display is reached, then release the button.

Manual Tuning Turn the MENU/SEL knob to select the frequency on the display.

Favorites List 1. Turn the MENU/SEL knob. 2. Select Favorites List. 3. Select the station.

Station Lists 1. Turn the MENU/SEL knob. 2. Select AM or FM Station List. All receivable stations in the current reception area are displayed. If a station list has not been created, an automatic station search is done.

3. Select the station.

Category Lists Most stations that broadcast an RDS program type code specify the type of programming transmitted. Some stations change the program type code depending on the content. The system stores the RDS stations sorted by program type in the FM category list. To search for a programming type determined by station: 1. Turn the MENU/SEL knob. 2. Select FM category list. A list of all programming types available displays.

Chevrolet Cruze Owner Manual - 2013 - crc - 10/16/12

Black plate (9,1)

3. Select the programming type. A list of stations that transmit programming of the selected type displays.

4. Select the station. The category lists are updated when the station lists are updated.

Updating Station & Category Lists If stations stored in the station list can no longer be received: 1. Turn the MENU/SEL knob. 2. Select Update AM or FM Station List, if the stations stored in the station list are no longer received. A station search will be completed and the first station in the updated list will play.

To cancel the station search, press the MENU/SEL knob.

Storing a Station as a Favorite Stations from all bands can be stored in any order in the favorite pages. Up to six stations can be stored in each favorite page and the number of available favorite pages can be set.

Storing Stations To store the station to a position in the list, press the corresponding button 1 to 6 until a beep is heard.

Retrieving Stations Press the FAV button to open a favorite page or to switch to another favorite page. Briefly press one of the 1 to 6 buttons to retrieve the station.

Infotainment System 7-9

Autostore Stations AS (Autostore): Autostore searches and stores 12 FM and 12 AM stations with the strongest signal on two pages with six stations stored on each page. To use autostore: 1. Press BAND to select FM or AM. 2. Press and hold AS until a beep sounds. SEARCH displays on the radio, followed by the number of stations found.

3. The radio will automatically store

the 12 strongest stations found as autostore presets.

4. Repeat steps 1 and 2 to

autostore stations on the other radio band.

Press the AS button to alternate between the autostore pages 1 and 2 of the selected radio band.

Chevrolet Cruze Owner Manual - 2013 - crc - 10/16/12

Black plate (10,1)

7-10

Infotainment System

AS displays on the radio when using autostore presets. Autostore does not delete previously stored favorite stations. Autostore does not function with SiriusXM radio stations.

Satellite Radio Vehicles with an SiriusXM® Satellite Radio tuner and a valid SiriusXM Satellite Radio subscription can receive SiriusXM programming. SiriusXM Satellite Radio Service SiriusXM is a satellite radio service based in the 48 contiguous United States and 10 Canadian provinces. SiriusXM Satellite Radio has a wide variety of programming and commercial-free music, coast to coast, and in digital-quality sound. A service fee is required to receive the SiriusXM service. If SiriusXM Service needs to be reactivated, the radio will display "No Subscription Please Renew" on channel XM1.

For more information, contact SiriusXM at www.siriusxm.com or call 1-866-635-2349 (U.S.) and www.xmradio.ca or call 1-877-209-0079 (Canada). Control Buttons The buttons used to control the SiriusXM radio are: BAND: Press to turn the radio on and choose between AM, FM, and XM. g or l : Press to go to the previous or next channel. FAV: Press to open the favorites list. 1 to 6: Press to select a favorite. MENU/SEL: Turn to select a channel. INFO: Press to display additional information that may be available about the current song. k (Play/Pause): Press to pause time shifted content, if equipped.

Selecting the XM Band Press the BAND button to choose between the AM, FM, and XM bands. The last channel played in that band begins to play when that band is selected. SiriusXM Categories SiriusXM channels are organized in categories.

Removing or Adding Categories Channels in a category that have been removed can still be accessed by using g or l , or the MENU/ SEL knob. To add or remove categories: 1. Press the CONFIG button. 2. Select Radio Settings. 3. Select XM Categories. 4. Turn the MENU/SEL knob to

highlight the category.

5. Press the MENU/SEL knob to

remove or add the category.

Chevrolet Cruze Owner Manual - 2013 - crc - 10/16/12

Black plate (11,1)

Selecting an SiriusXM Channel SiriusXM channels can be selected by using g, l , the MENU/SEL knob, or the Menu system. Selecting a Channel Using g or l . Press and release g or l to

go to the previous or next channel.

. Press and hold g or l to

scroll through the previous or next channel until the channel is reached.

Selecting a Channel Using the MENU/SEL Knob To select an SiriusXM channel using the MENU/SEL knob: Turn the MENU/SEL knob to highlight an SiriusXM channel. The channel is selected after a short delay.

To select a channel using the MENU/SEL knob: 1. Turn the MENU/SEL knob and

select Channel List.

2. Select the desired channel.

Selecting a Channel Using the Menu System 1. Turn the MENU/SEL knob. 2. Select XM Category List. 3. Select the category. 4. Select the channel. Storing an SiriusXM Channel as a Favorite Channels from all bands can be stored in any order in the favorite pages. Up to six channels can be stored in each favorite page and the number of available favorite pages can be set.

Infotainment System 7-11

Storing a Channel as a Favorite To store the channel to a position in the list, press and hold the corresponding 1 to 6 button until the channel can be heard again.

Retrieving Channels Press the FAV button to open a favorite page or to change to another favorite page. Briefly press one of the 1 to 6 buttons to retrieve the channel. XM Messages XL (Explicit Language Channels): These channels, or any others, can be blocked by request, by calling 1-866-635-2349 (U.S.), and 1-877-209-0079 (Canada). XM Updating: The encryption code in the receiver is being updated. No action is required. This process should take no longer than 30 seconds.

Chevrolet Cruze Owner Manual - 2013 - crc - 10/16/12

Black plate (12,1)

7-12

Infotainment System

Loading XM: The audio system is acquiring and processing audio and text data. No action is needed. This message should disappear shortly. Channel Off Air: This channel is not currently in service. Tune in to another channel. Channel Unauth: This channel is blocked or cannot be received with your SiriusXM Subscription package. Channel Unavailable: This previously assigned channel is no longer assigned. Tune to another station. No Artist Info: The system is working properly. No artist information is available at this time on this channel. No Title Info: The system is working properly. No song title information is available at this time on this channel.

No CAT Info: The system is working properly. No category information is available at this time on this channel. No Information: The system is working properly. No text or informational messages are available at this time on this channel. No Subscription Please Renew: SiriusXM subscription needs to be reactivated. Contact SiriusXM at www.siriusxm.com or call 1-866-635-2349 (U.S.) and www.xmradio.ca or call 1-877-209-0079 (Canada). No XM Signal: The system is working properly. The vehicle may be in a location where the SiriusXM signal is being blocked. When the vehicle is moved into an open area, the signal should return.

If tuned to channel 0,

If this message is

CAT Not Found: The system is working properly. There are no channels available for the selected category. XM Radio ID: this message alternates with the SiriusXM Radio eight-digit radio ID label. This label is needed to activate the service. Unknown: received when tuned to channel 0, there could be a receiver fault. Consult with your dealer. Check Antenna: does not clear within a short period of time, the receiver could have a fault. Consult with your dealer. XM Not Available: If this message does not clear within a short period of time, the receiver could have a fault. Consult with your dealer.

If this message

Chevrolet Cruze Owner Manual - 2013 - crc - 10/16/12

Black plate (13,1)

Infotainment System 7-13

Satellite Radio Antenna The SiriusXM Satellite Radio antenna is located on the roof of the vehicle. Keep the antenna clear of obstructions for clear radio reception. If the vehicle has a sunroof, the performance of the XM system may be affected if the sunroof is open.

Multi-Band Antenna The multi-band antenna is on the roof of the vehicle. The antenna is used for the AM-FM radio, OnStar, the SiriusXM Satellite Radio Service System, and GPS (Global Positioning System), if the vehicle has these features. Keep the antenna clear of obstructions for clear reception.

when things like storms and power lines interfere with radio reception. When this happens, try reducing the treble on the radio. SiriusXM Satellite Radio Service SiriusXM Satellite Radio Service provides digital radio reception. Tall buildings or hills can interfere with satellite radio signals, causing the sound to fade in and out. In addition, traveling or standing under heavy foliage, bridges, garages, or tunnels may cause loss of the SiriusXM signal for a period of time. Cell Phone Usage Cell phone usage, such as making or receiving phone calls, charging, or just having the phone on may cause static interference in the radio. Unplug the phone or turn it off if this happens.

Radio Reception Frequency interference and static can occur during normal radio reception if items such as phone chargers, vehicle convenience accessories, and external electronic devices are plugged into the accessory power outlet. If there is interference or static, unplug the item from the accessory power outlet. FM FM signals only reach about 16 to 65 km (10 to 40 mi). Although the radio has a built-in electronic circuit that automatically works to reduce interference, some static can occur, especially around tall buildings or hills, causing the sound to fade in and out. AM The range for most AM stations is greater than for FM, especially at night. The longer range can cause station frequencies to interfere with each other. Static can also occur

Chevrolet Cruze Owner Manual - 2013 - crc - 10/16/12

Black plate (14,1)

7-14

Infotainment System

Audio Players

CD Player The CD player can play audio CDs and MP3 CDs. The CD player will not play 8 cm (3 in) CDs.

Care of CDs Sound quality can be reduced due to disc quality, recording method, quality of the music recorded, and how the disc has been handled. Handle discs carefully and store them in their original cases or other protective cases away from direct sunlight and dust. If the bottom surface of a disc is damaged, the disc may not play properly or at all. Do not touch the bottom surface of a disc while handling it; this could damage the surface. Pick up discs by grasping the outer edges or the edge of the hole and the outer edge. If the bottom surface of a disc is dirty, take a soft lint-free cloth, or dampen a clean soft cloth in a

mild neutral detergent solution mixed with water, and clean it. Wipe the disc from the center to the outer edge.

Care of the CD Player Do not add a label to a disc, as it could get caught in the CD player. If a label is needed, label the top of the recorded disc with a marking pen. Do not use disc lens cleaners because they could contaminate the lens of the disc optics and damage the CD player. Notice: If a label is added to a CD, more than one CD is inserted into the slot at a time, or an attempt is made to play scratched or damaged CDs, the CD player could be damaged. While using the CD player, use only CDs in good condition without any label, load one CD at a time, and keep the CD player and the loading slot free of foreign materials, liquids, and debris.

Control Buttons The buttons used to control the CD player are: CD/AUX: Press to use the CD player. l or g : Press to select tracks or to fast forward or rewind within a track. INFO: Press to display additional information about the current track that may be available. MENU/SEL: Turn to enter the menu. Y : Press to eject the disc. Inserting a CD With the printed side facing up, insert a disc into the CD slot until it is drawn in. Removing a CD Press Y. The disc is pushed out of the CD slot.

Chevrolet Cruze Owner Manual - 2013 - crc - 10/16/12

Black plate (15,1)

Infotainment System 7-15

Tracks can be searched by: . Playlists . Artists . Albums . Song Titles . Genres

Folder View

To search for tracks: 1. Turn the MENU/SEL knob. 2. Select Search. 3. Select: Playlists, Artists, Albums,

Song Titles, Genres, or Folder View. 4. Select the track.

If the disc is not removed after it is ejected, it is pulled back in after a few seconds. Playing a CD or MP3 CD Press the CD/AUX button if there is a disc in the player; it begins playing. Information about the disc and current track is shown on the display depending on the data stored.

Selecting a CD Track Using the control buttons: . Press g or l to select the

previous or next track.

Using the CD Menu: 1. Turn the MENU/SEL knob. 2. Select Tracks list. 3. Select the track.

Playing Tracks in Random Order Turn the MENU/SEL knob and then set Shuffle Songs to On.

Fast Forward and Rewind Press and hold l or g to fast forward or rewind within the current track.

Selecting an MP3 Track Using the control buttons: . Press g or l to select the

previous or next track.

Using the CD Menu: 1. Turn the MENU/SEL knob. 2. Select Playlists/Folders. 3. Select the playlist or folder. 4. Select the track.

Searching for MP3 Tracks The search feature may take some time to display the information after reading the disc due to the amount of information stored on the disc. FM automatically plays while the disc is being read.

Chevrolet Cruze Owner Manual - 2013 - crc - 10/16/12

Black plate (16,1)

7-16

Infotainment System

Auxiliary Devices If equipped, the AUX inputs are in the center console and allows portable devices to connect to the vehicle using the 3.5 mm (1/8 in) auxiliary jack or USB port. Portable devices are controlled by using the menu system described in Operation on page 7‑4. 3.5 mm Jack Connect a 3.5 mm (1/8 in) cable to the auxiliary input jack to use a portable audio player. Playback of an audio device that is connected to the 3.5 mm jack can only be controlled using the controls on the device.

Adjusting the Volume Turn the O knob to adjust the volume of the infotainment system after the volume level has been set on the portable audio device.

USB Port For vehicles with a USB port, the following devices may be connected and controlled by the infotainment system.

iPods

. PlaysForSure Devices (PFDs) . USB Drives

Zunes®

Not all iPods, PFDs, USB drives, and Zunes are compatible with the infotainment system. Devices are also charged while plugged into the USB port. Connecting and Controlling an iPod™ Not all iPods can be controlled by the infotainment system.

Connecting an iPod Connect the iPod to the USB port.

Searching for a Track Tracks that are found can be searched for by: . Playlists . Artists . Albums . Song Titles . Podcasts . Genres . Audio Books . Composers To search for tracks: 1. Turn the MENU/SEL knob. 2. Select Search. 3. Select: Playlists, Artists, Albums,

Song Titles, Podcasts, Genres, Audio Books, or Composers.

4. Select the track.

Chevrolet Cruze Owner Manual - 2013 - crc - 10/16/12

Black plate (17,1)

Shuffle Turn the MENU/SEL knob and set Shuffle Songs (Random) to On or Off, then press the BACK button to return to the main screen. On: Plays tracks in the current folder in random order. Off: Plays tracks in the current folder in sequential order.

Repeat Turn the MENU/SEL knob and set Repeat to On or Off, then press the BACK button to return to the main screen. On: Repeats the current track. Off: Starts playback from the beginning of the current track after the last track finishes. Connecting and Controlling a PlaysForSure Device (PFD) or Zune

Connecting a PFD or Zune Connect the PFD or Zune to the USB port.

Searching for a Track Tracks can be searched for by: . Playlists . Artists . Albums . Song Titles . Podcasts . Genres To search for tracks: 1. Turn the MENU/SEL knob. 2. Select Search. 3. Select: Playlists, Artists, Albums,

Song Titles, Podcasts, or Genres.

4. Select the track.

Shuffle Functionality Turn the MENU/SEL knob and set Shuffle Songs (Random) to On or Off. On: Plays current tracks in random order.

Infotainment System 7-17

Off: Plays current tracks in sequential order.

Repeat Functionality Turn the MENU/SEL knob and set Repeat to On or Off. Repeat On: Repeats the current track. Repeat Off: Starts playback from the beginning of the current track after the last track finishes. Connecting and Controlling a USB Drive The infotainment system can only play back .mp3 and .wma files from a USB drive. Only the first 10,000 songs are recognized on the device. When a device is not supported, the message “No supported data found. You can safely disconnect the device” appears.

Connecting a USB Drive Connect the USB drive to the USB port.

Chevrolet Cruze Owner Manual - 2013 - crc - 10/16/12

Black plate (18,1)

7-18

Infotainment System

Searching for a Track It is normal for the search feature to take some time to display the information after reading the device due to the amount of information stored. Files that do not have any meta data stored in the ID3 tag display as Unknown. Tracks can be searched for by: . Playlists* . Artists . Albums . Song Titles . Genres

Folder View

*This only displays if a playlist is found on the device. To search for tracks: 1. Turn the MENU/SEL knob. 2. Select Search.

3. Select: Playlists, Artists, Albums,

Song Titles, Genres, or Folder View. 4. Select the track.

Shuffle Functionality Turn the MENU/SEL knob and set Shuffle Songs (Random) to On or Off. On: Plays current tracks in random order. Off: Plays current tracks in sequential order.

Repeat Functionality Turn the MENU/SEL knob and set Repeat to On or Off. Repeat On: Repeats the current track. Repeat Off: Starts playback from the beginning of the current track after the last track finishes.

Phone

Bluetooth (Overview) For vehicles equipped with Bluetooth capability, the system can interact with many cell phones, allowing: . Placement and receipt of calls in

a hands-free mode.

. Sharing of the cell phone’s

address book or contact list with the vehicle.

To minimize driver distraction, before driving, and with the vehicle parked: . Become familiar with the

features of the cell phone. Organize the phone book and contact lists clearly and delete duplicate or rarely used entries. If possible, program speed dial or other shortcuts.

. Review the controls and

operation of the infotainment system.

Chevrolet Cruze Owner Manual - 2013 - crc - 10/16/12

Black plate (19,1)

. Pair cell phone(s) to the vehicle.

The system may not work with all cell phones. See “Pairing” in this section for more information. If the cell phone has voice dialing capability, learn to use that feature to access the address book or contact list. See “Voice Pass-Thru” in this section for more information.

. See “Storing and Deleting Phone

Numbers” in this section for more information.

{ WARNING

When using a cell phone, it can be distracting to look too long or too often at the screen of the phone or the infotainment (navigation) system. Taking your eyes off the road too long or too often could cause a crash resulting in injury or death. Focus your attention on driving.

Vehicles with a Bluetooth system can use a Bluetooth-capable cell phone with a Hands-Free Profile to make and receive phone calls. The infotainment system and voice recognition are used to control the system. The system can be used while in ON/RUN or ACC/ ACCESSORY. The range of the Bluetooth system can be up to 9.1 m (30 ft). Not all phones support all functions and not all phones work with the Bluetooth system. See www.gm.com/bluetooth for more information about compatible phones. Bluetooth Controls Use the buttons located on the infotainment system and the steering wheel to operate the Bluetooth system.

Steering Wheel Controls b / g (Push To Talk): Press to answer incoming calls, confirm system information, and start voice recognition.

Infotainment System 7-19

$ / i (End Call/Mute): Press to end a call, reject a call, or cancel an operation.

Infotainment System Controls If equipped, the infotainment system allows certain controls to be selected on the infotainment display. See OnStar Overview on page 14‑1. For information about how to navigate the menu system using the infotainment controls. See Operation on page 7‑4. 5 \ > (PHONE/MUTE): Press to enter the Phone main menu. Press to mute the audio system. Voice Recognition The voice recognition system uses commands to control the system and dial phone numbers. Noise: The system may not recognize voice commands if there is too much background noise.

Chevrolet Cruze Owner Manual - 2013 - crc - 10/16/12

Black plate (20,1)

7-20

Infotainment System

When to Speak: A tone sounds to indicate that the system is ready for a voice command. Wait for the tone and then speak. How to Speak: Speak clearly in a calm and natural voice. Audio System When using the Bluetooth system, sound comes through the vehicle's front audio system speakers and overrides the audio system. Use the VOL/ O knob during a call to change the volume level. The adjusted volume level remains in memory for later calls. The system maintains a minimum volume level. Other Information The Bluetooth® word mark and logos are owned by the Bluetooth® SIG, Inc. and any use of such marks by General Motors is under license. Other trademarks and trade names are those of their respective owners.

See Radio Frequency Statement on page 13‑15 for information regarding Part 15 of the Federal Communications Commission (FCC) rules and Industry Canada Standards RSS-GEN/210/220/310.

Bluetooth (Infotainment Controls) For information about how to navigate the menu system using the infotainment controls, see Operation on page 7‑4. Pairing A Bluetooth-enabled cell phone must be paired to the Bluetooth system and then connected to the vehicle before it can be used. See your cell phone manufacturer's user guide for Bluetooth functions before pairing the cell phone. If a Bluetooth phone is not connected, calls will be made using OnStar Hands-Free Calling, if available. See Operation on page 7‑4.

Pairing Information . A Bluetooth phone with MP3
capability cannot be paired to the vehicle as a phone and an MP3 player at the same time. . Up to five cell phones can be

paired to the Bluetooth system. The pairing process is disabled when the vehicle is moving.

. Pairing only needs to be

completed once, unless the pairing information on the cell phone changes or the cell phone is deleted from the system.

. Only one paired cell phone can be connected to the Bluetooth system at a time. If multiple paired cell phones are within range of the system, the system connects to the first available paired cell phone in the order that they were first paired to the system. To link to a different paired phone, see “Linking to a Different Phone” later in this section.

Chevrolet Cruze Owner Manual - 2013 - crc - 10/16/12

Black plate (21,1)

Pairing a Phone 1. Press the CONFIG button. 2. Select Phone Settings. 3. Select Bluetooth. 4. Select Pair Device (Phone).

A four-digit Personal Identification Number (PIN) appears on the display. The PIN is used in Step 6.

5. Start the pairing process on the

cell phone to be paired to the vehicle. See the cell phone manufacturer's user guide for information on this process.

6. Locate the device named “Your

Vehicle” in the list on the cell phone. Follow the instructions on the cell phone to enter the PIN provided in Step 4. After the PIN is successfully entered, the system prompts you to provide a name for the paired cell phone. This name will be used to indicate which phones are paired and connected to the vehicle. The system responds

with “ has been successfully paired” after the pairing process is complete.

7. Repeat Steps 1–6 to pair

additional phones.

Listing All Paired and Connected Phones 1. Press the CONFIG button. 2. Select Phone Settings. 3. Select Bluetooth. 4. Select Device List.

Deleting a Paired Phone 1. Press the CONFIG button. 2. Select Phone Settings. 3. Select Bluetooth. 4. Select Device List. 5. Select the phone to delete and follow the on screen prompts.

Infotainment System 7-21

Linking to a Different Phone To link to a different phone, the new phone must be in the vehicle and available to be connected to the Bluetooth system before the process is started. 1. Press the CONFIG button. 2. Select Phone Settings. 3. Select Bluetooth. 4. Select Device List. 5. Select the new phone to link to

and follow the on screen prompts. If delete is selected, the highlighted phone will be deleted.

Making a Call Using Phone Book For cell phones that support the phone book feature, the Bluetooth system can use the contacts stored on your cell phone to make calls. See your cell phone phone manufacturer's user guide or

Chevrolet Cruze Owner Manual - 2013 - crc - 10/16/12

Black plate (22,1)

7-22

Infotainment System

contact your wireless provider to find out if this feature is supported by your phone. When a cell phone supports the phone book feature, the Phone Book and Call Lists menus are automatically available. The Phone Book menu allows you to access the phone book stored in the cell phone to make a call. The Call Lists menu allows you to access the phone numbers from the Incoming Calls, Outgoing Calls, and Missed Calls menus on your cell phone to make a call. To make a call using the Phone Book menu: 1. Press 5 \ > once or twice (depending on the radio).

2. Select Phone Book. 3. Search through the list by

selecting the letter group the phone book entry begins with, or press the MENU/SEL button

to scroll through the entire list of names/numbers in the phone book.

4. Select the name or number you

want to call.

To make a call using the Call Lists menu: 1. Press 5 \ > once or twice (depending on the radio).

2. Select Call Lists. 3. Select the Incoming Calls, Outgoing Calls, or Missed Calls list.

4. Select the name or number you

want to call. Making a Call To make a call: 1. Press 5 \ > once or twice (depending on the radio).

2. Enter the character sequence.

See “Entering a Character Sequence” in Operation on page 7‑4.

3. Select Call to start dialing the

number.

Accepting or Declining a Call When an incoming call is received, the infotainment system mutes and a ring tone is heard in the vehicle.

Accepting a Call Turn the MENU/SEL knob to “Answer” and press the MENU/SEL knob to accept the call.

Declining a Call Turn the MENU/SEL knob to “Decline” and press the MENU/SEL knob to decline the call. Call Waiting Call waiting must be supported on the Bluetooth phone and enabled by the wireless service carrier to work.

Accepting a Call Turn the MENU/SEL knob to “Answer” and press the MENU/SEL knob to accept the call.

Chevrolet Cruze Owner Manual - 2013 - crc - 10/16/12

Black plate (23,1)

Declining a Call Turn the MENU/SEL knob to “Decline” and press the MENU/SEL knob to decline the call.

Switching Between Calls (Call Waiting Calls Only) To switch between calls: 1. Turn or press the MENU/

SEL knob.

2. Select Switch Call from

the menu.

Conference Calling Conference calling and three-way calling must be supported on the Bluetooth phone and enabled by the wireless service carrier to work. To start a conference while in a current call: 1. Turn or press the MENU/

SEL knob.

2. Select Enter Number.

3. Enter the character sequence

then select Call. See “Entering a Character Sequence” in Operation on page 7‑4.

4. After the call has been placed,

turn or press the MENU/SEL knob and choose Merge Calls.

5. To add more callers to the

conference call, repeat Steps 1– 4. The number of callers that can be added is limited by your wireless service carrier.

Ending a Call Turn or press the MENU/SEL knob and select Hang Up. Muting a Call

To Mute a Call Turn or press the MENU/SEL knob and select Mute Call.

To Cancel Mute Turn or press the MENU/SEL knob and select Mute Call.

Infotainment System 7-23

Dual Tone Multi-Frequency (DTMF) Tones The in-vehicle Bluetooth system can send numbers during a call. This is used when calling a menu-driven phone system. 1. Turn or press the MENU/SEL

knob and select Enter Number. 2. Enter the character sequence.

See “Entering a Character Sequence” in Operation on page 7‑4.

Bluetooth (Voice Recognition)

Using Voice Recognition To use voice recognition, press the b / g button located on the steering wheel. Use the commands below for the various voice features. For additional information, say “Help” while you are in a voice recognition menu.

Chevrolet Cruze Owner Manual - 2013 - crc - 10/16/12

Black plate (24,1)

7-24

Infotainment System

Pairing A Bluetooth-enabled cell phone must be paired to the Bluetooth system and then connected to the vehicle before it can be used. See your cell phone manufacturer's user guide for Bluetooth functions before pairing the cell phone. If a Bluetooth phone is not connected, calls will be made using OnStar Hands-Free Calling, if available. See Operation on page 7‑4.

Pairing Information . A Bluetooth phone with MP3
capability cannot be paired to the vehicle as a phone and an MP3 player at the same time. . Up to five cell phones can be

paired to the Bluetooth system. The pairing process is disabled when the vehicle is moving.

. Pairing only needs to be

completed once, unless the pairing information on the cell phone changes or the cell phone is deleted from the system.

. Only one paired cell phone can be connected to the Bluetooth system at a time. If multiple paired cell phones are within range of the system, the system connects to the first available paired cell phone in the order that they were first paired to the system. To link to a different paired phone, see “Linking to a Different Phone” later in this section.

Pairing a Phone 1. Press b / g. The system

responds “Ready,” followed by a tone.

2. Say “Bluetooth.” This command

can be skipped.

3. Say “Pair.” The system responds with instructions and a four-digit Personal Identification Number (PIN). The PIN is used in Step 5.

4. Start the pairing process on the cell phone that you want to pair. For help with this process, see your cell phone manufacturer's user guide.

5. Locate the device named “Your

Vehicle” in the list on the cell phone. Follow the instructions on the cell phone to enter the PIN provided in Step 3. After the PIN is successfully entered, the system prompts you to provide a name for the paired cell phone. This name will be used to indicate which phones are paired and connected to the vehicle. The system responds with “ has been successfully paired” after the pairing process is complete.

6. Repeat Steps 1–5 to pair

additional phones.

Chevrolet Cruze Owner Manual - 2013 - crc - 10/16/12

Black plate (25,1)

Connecting to a Different Phone To connect to a different cell phone, the Bluetooth system looks for the next available cell phone in the order in which all available cell phones were paired. Depending on which cell phone you want to connect to, you may have to use this command several times. 1. Press b / g. The system

responds “Ready,” followed by a tone.

2. Say “Bluetooth.” 3. Say “Change phone.”

If another cell phone is found, the response will be “ is now connected.” If another cell phone is not found, the original phone remains connected.

Infotainment System 7-25

Storing and Deleting Phone Numbers The system can store up to 30
phone numbers as name tags in the Hands-Free Directory that is shared between the Bluetooth and OnStar systems. The following commands are used to delete and store phone numbers. Store: This command will store a phone number, or a group of numbers as a name tag. Digit Store: This command allows a phone number to be stored as a name tag by entering the digits one at a time. Delete: This command is used to delete individual name tags. Delete All Name Tags: This command deletes all stored name tags in the Hands-Free Calling Directory and the Destinations Directory.

Listing All Paired and Connected Phones The system can list all cell phones paired to it. If a paired cell phone is also connected to the vehicle, the system responds with “is connected” after that phone name. 1. Press b / g. The system

responds “Ready,” followed by a tone.

2. Say “Bluetooth.” 3. Say “List.”

Deleting a Paired Phone If the phone name you want to delete is unknown, see “Listing All Paired and Connected Phones.” 1. Press b / g. The system

responds “Ready,” followed by a tone.

2. Say “Bluetooth.” 3. Say “Delete.” The system asks

for which phone to delete.

4. Say the name of the phone you

want to delete.

Chevrolet Cruze Owner Manual - 2013 - crc - 10/16/12

Black plate (26,1)

7-26

Infotainment System

Using the “Store” Command 1. Press b / g. The system

responds “Ready,” followed by a tone.

2. Say “Store.” 3. Say the phone number or group of numbers you want to store all at once with no pauses, then follow the directions given by the system to save a name tag for this number.

Using the “Digit Store” Command If an unwanted number is recognized by the system, say “Clear” at any time to clear the last number. To hear all of the numbers recognized by the system, say “Verify” at any time. 1. Press b / g. The system

responds “Ready,” followed by a tone.

2. Say “Digit Store.”

3. Say each digit, one at a time,

that you want to store. After each digit is entered, the system repeats back the digit it heard followed by a tone. After the last digit has been entered, say “Store,” and then follow the directions given by the system to save a name tag for this number.

Using the “Delete” Command 1. Press b / g. The system

responds “Ready,” followed by a tone.

2. Say “Delete.” 3. Say the name tag you want to

delete.

Using the “Delete All Name Tags” Command This command deletes all stored name tags in the Hands Free Calling Directory and the Destinations Directory.

To delete all name tags: 1. Press b / g. The system

responds “Ready,” followed by a tone.

2. Say “Delete all name tags.” Listing Stored Numbers The list command will list all stored numbers and name tags. Using the “List” Command 1. Press b / g. The system

responds “Ready,” followed by a tone.

2. Say “Directory.” 3. Say “Hands Free Calling.” 4. Say “List.” Making a Call Calls can be made using the following commands. Dial or Call: The dial or call command can be used interchangeably to dial a phone number or a stored name tag.

Chevrolet Cruze Owner Manual - 2013 - crc - 10/16/12

Black plate (27,1)

3. Say “911.” 4. Say “Dial” or “Call.” Using the “Digit Dial” Command The digit dial command allows a phone number to be dialed by entering the digits one at a time. After each digit is entered, the system repeats back the digit it heard followed by a tone. If an unwanted number is recognized by the system, say “Clear” at any time to clear the last number. To hear all of the numbers recognized by the system, say “Verify” at any time. 1. Press b / g. The system

responds “Ready,” followed by a tone.

2. Say “Digit Dial.”

Infotainment System 7-27

3. Say each digit, one at a time,

that you want to dial. After each digit is entered, the system repeats back the digit it heard followed by a tone. After the last digit has been entered, say “Dial.”

Once connected, the person called will be heard through the audio speakers. Using the “Re-dial” Command 1. Press b / g. The system

responds “Ready,” followed by a tone.

2. After the tone, say “Re-dial.” The

system dials the last number called from the connected cell phone.

Once connected, the person called will be heard through the audio speakers.

Digit Dial: This command allows a phone number to be dialed by entering the digits one at a time. Re-dial: This command is used to dial the last number used on the cell phone. Using the “Dial” or “Call” Command 1. Press b / g. The system

responds “Ready,” followed by a tone.

2. Say “Dial” or “Call.” 3. Say the entire number without pausing or say the name tag.

Once connected, the person called will be heard through the audio speakers.

Calling 911 Emergency 1. Press b / g. The system

responds “Ready,” followed by a tone.

2. Say “Dial” or “Call.”

Chevrolet Cruze Owner Manual - 2013 - crc - 10/16/12

Black plate (28,1)

7-28

Infotainment System

Receiving a Call When an incoming call is received, the audio system mutes and a ring tone is heard in the vehicle. . Press b / g to answer the call. . Press $ / i to ignore a call. Call Waiting Call waiting must be supported on the cell phone and enabled by the wireless service carrier. . Press b / g to answer an

incoming call when another call is active. The original call is placed on hold.

. Press b / g again to return to

the original call. To ignore the incoming call, no action is required.

. Press $ / i to disconnect the current call and switch to the call on hold.

Three-Way Calling Three-way calling must be supported on the cell phone and enabled by the wireless service carrier. 1. While on a call, press b / g. 2. Say “Three-way call.” 3. Use the dial or call command to dial the number of the third party to be called.

4. Once the call is connected, press b / g to link all callers together.

Ending a Call Press $ / i to end a call. Muting a Call During a call, all sounds from inside the vehicle can be muted so that the person on the other end of the call cannot hear them.

To mute a call, press b / g , and then say “Mute Call.” To cancel mute, press b / g , and then say “Un-mute Call.” Transferring a Call Audio can be transferred between the Bluetooth system and the cell phone. The cell phone must be paired and connected with the Bluetooth system before a call can be transferred. The connection process can take up to two minutes after the ignition is turned to ON/RUN.

To Transfer Audio from the Bluetooth System to a Cell Phone During a call with the audio in the vehicle: 1. Press b / g. 2. Say “Transfer Call.”

Chevrolet Cruze Owner Manual - 2013 - crc - 10/16/12

Black plate (29,1)

Infotainment System 7-29

Clearing the System Unless information is deleted out of the in-vehicle Bluetooth system, it will be retained indefinitely. This includes all saved name tags in the phone book and phone pairing information. For information on how to delete this information, see the previous sections on “Deleting a Paired Phone” and “Deleting Name Tags.”

To Transfer Audio to the Bluetooth System from a Cell Phone During a call with the audio on the cell phone, press b / g. The audio transfers to the vehicle. If the audio does not transfer to the vehicle, use the audio transfer feature on the cell phone. See your cell phone manufacturer's user guide for more information. Voice Pass-Thru Voice pass-thru allows access to the voice recognition commands on the cell phone. See your cell phone manufacturer's user guide to see if the cell phone supports this feature. To access contacts stored in the cell phone: 1. Press b / g. The system

responds “Ready,” followed by a tone.

2. Say “Bluetooth.” This command

can be skipped.

3. Say “Voice.” The system responds “OK, accessing .”

The cell phone's normal prompt messages will go through their cycle according to the phone's operating instructions. Dual Tone Multi-Frequency (DTMF) Tones The Bluetooth system can send numbers and the numbers stored as name tags during a call. You can use this feature when calling a menu-driven phone system. Account numbers can also be stored for use.

Sending a Number or Name Tag During a Call 1. Press b / g. The system

responds “Ready,” followed by a tone.

2. Say “Dial.” 3. Say the number or name tag

to send.

Chevrolet Cruze Owner Manual - 2013 - crc - 10/16/12

Black plate (30,1)

7-30

Infotainment System

Trademarks and License Agreements

Manufactured under license under U.S. Patent #'s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks and DTS Digital Surround and the DTS logos are trademarks of DTS Inc. All Rights Reserved.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

“Made for iPod and iPhone” means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards. iPod is a trademark of Apple Computer, Inc., registered in the U.S. and other countries.

Fees and Taxes — Subscription fee, taxes, one time activation fee, and other fees may apply. Subscription fee is consumer only. All fees and programming subject to change. Subscriptions subject to Customer Agreement available at www.siriusxm.com. XM® service only available in the 48 contiguous United States and Canada*. *Canada — Some deterioration of service may occur in extreme northern latitudes. This is beyond the control of SiriusXM® Satellite Radio. Explicit Language Notice — Channels with frequent explicit language are indicated with an “XL” preceding the channel name. Channel blocking is available for SiriusXM Satellite Radio receivers by notifying SiriusXM at:

Chevrolet Cruze Owner Manual - 2013 - crc - 10/16/12

Black plate (31,1)

. USA Customers — See

www.siriusxm.com or call 1-866-635-2349.

. Canadian Customers — See

www.xmradio.ca or call 1-877-209-0079.

It is prohibited to copy, decompile, disassemble, reverse engineer, hack, manipulate, or otherwise make available any technology or software incorporated in receivers compatible with the SiriusXM® Satellite Radio System or that support the SiriusXM website, the Online Service or any of its content. Furthermore, the AMBER voice compression software included in this product is protected by intellectual property rights including patent rights, copyrights, and trade secrets of Digital Voice Systems, Inc. General Requirements: 1. A License Agreement from

SiriusXM® is required for any product that incorporates SiriusXM Technology and/or for

use of any of the SiriusXM marks to be manufactured, distributed or marketed in the SiriusXM Service Area.

2. For products to be distributed,

marketed and/or sold in Canada, a separate agreement is required with Canadian Satellite Radio Inc. (operating as XM Canada).

Music and video recognition technology and related data are provided by Gracenote®. Gracenote is the industry standard in music recognition technology and related content delivery. For more information, visit www.gracenote.com.

Infotainment System 7-31

CD, DVD, Blu-ray Disc, and music and video-related data from Gracenote, Inc., copyright © 2000 to present Gracenote. One or more patents owned by Gracenote apply to this product and service. See the Gracenote website for a non-exhaustive list of applicable Gracenote patents. Gracenote and CDDB, MusicID, Media VOCS, the Gracenote logo and logotype, and the “Powered by Gracenote” logo are either registered trademarks or trademarks of Gracenote in the United States and/or other countries. If you require more information regarding the use of the Gracenote Service, visit: www.gracenote.com/ corporate. For the data provided by Gracenote® Music Recognition Service, the content is not necessarily guaranteed 100%.

Chevrolet Cruze Owner Manual - 2013 - crc - 10/16/12

Black plate (32,1)

7-32

Infotainment System

Regarding the use of Gracenote Music Recognition Service, when this product is used, it is necessary to agree to the following articles.

Gracenote® End User License This application or device contains software from Gracenote, Inc. of Emeryville, California (“Gracenote”). The software from Gracenote (the “Gracenote Software”) enables this application to perform disc and/or file identification and obtain music-related information, including name, artist, track, and title information (“Gracenote Data”) from online servers or embedded databases (collectively, “Gracenote Servers”) and to perform other functions. You may use Gracenote Data only by means of the intended End-User functions of this application or device. You agree that you will use Gracenote Data, the Gracenote Software, and Gracenote Servers for your own personal non-commercial use only. You agree not to assign, copy, transfer or

transmit the Gracenote Software or any Gracenote Data to any third party. YOU AGREE NOT TO USE OR EXPLOIT GRACENOTE DATA, THE GRACENOTE SOFTWARE, OR GRACENOTE SERVERS, EXCEPT AS EXPRESSLY PERMITTED HEREIN. You agree that your non-exclusive license to use the Gracenote Data, the Gracenote Software, and Gracenote Servers will terminate if you violate these restrictions. If your license terminates, you agree to cease any and all use of the Gracenote Data, the Gracenote Software, and Gracenote Servers. Gracenote reserves all rights in Gracenote Data, the Gracenote Software, and the Gracenote Servers, including all ownership rights. Under no circumstances will Gracenote become liable for any payment to you for any information that you provide. You agree that

Gracenote, Inc. may enforce its rights under this Agreement against you directly in its own name. The Gracenote service uses a unique identifier to track queries for statistical purposes. The purpose of a randomly assigned numeric identifier is to allow the Gracenote service to count queries without knowing anything about who you are. For more information, see the web page for the Gracenote Privacy Policy for the Gracenote service. The Gracenote Software and each item of Gracenote Data are licensed to you “AS IS.” Gracenote makes no representations or warranties, express or implied, regarding the accuracy of any Gracenote Data from in the Gracenote Servers. Gracenote reserves the right to delete data from the Gracenote Servers or to change data categories for any cause that Gracenote deems sufficient.

Chevrolet Cruze Owner Manual - 2013 - crc - 10/16/12

Black plate (33,1)

Infotainment System 7-33

No warranty is made that the Gracenote Software or Gracenote Servers are error-free or that functioning of Gracenote Software or Gracenote Servers will be uninterrupted. Gracenote is not obligated to provide you with new enhanced or additional data types or categories that Gracenote may provide in the future and is free to discontinue its services at any time. Gracenote disclaims all warranties express or implied, including, but not limited to, implied warranties of merchantability, fitness for a particular purpose, title, and non-infringement. Gracenote does not warrant the results that will be obtained by your use of the Gracenote software or any Gracenote server. In no case will Gracenote be liable for any consequential or incidental damages or for any lost profits or lost revenues.

Chevrolet Cruze Owner Manual - 2013 - crc - 10/16/12

Black plate (34,1)

7-34

Infotainment System

2 NOTES

Chevrolet Cruze Owner Manual - 2013 - crc - 10/16/12

Black plate (1,1)

Climate Controls

8-1

Climate Control Systems The heating, cooling, defrosting, and ventilation for the vehicle can be controlled with these systems.

6. Driver and Passenger Heated

Seats (If Equipped)

7. Rear Window Defogger 8. Defog 9. Defrost

Vehicles without Air Conditioning

Vehicles with Air Conditioning

Climate Controls

Climate Control Systems

Climate Control Systems . . . . . . 8-1
Automatic Climate Control

System . . . . . . . . . . . . . . . . . . . . . . 8-3

Air Vents

Air Vents . . . . . . . . . . . . . . . . . . . . . . 8-6

Maintenance

Passenger Compartment Air

Filter . . . . . . . . . . . . . . . . . . . . . . . . . 8-7
Service . . . . . . . . . . . . . . . . . . . . . . . 8-7

1. Temperature Control 2. Bi-level Air Mode 3. Floor Air Mode 4. Vent Air Mode 5. Fan Control

1. Temperature Control 2. Bi-level Air Mode 3. Floor Air Mode 4. Vent Air Mode 5. Fan Control