2011 Cadillac CTS Owners Manual

If this message is

If this

Check XM Receivr: message does not clear within a short period of time, the receiver could have a fault. Consult with your dealer. XM Not Available: If this message does not clear within a short period of time, the receiver could have a fault. Consult with your dealer.

Radio Reception Frequency interference and static can occur during normal radio reception if items such as cell phone chargers, vehicle convenience accessories, and external electronic devices are plugged into the accessory power outlet. If there is interference or static, unplug the item from the accessory power outlet.

FM FM signals only reach about 16 to 65 km (10 to 40 miles). Although the radio has a built-in electronic circuit that automatically works to reduce interference, some static can occur, especially around tall buildings or hills, causing the sound to fade in and out. AM The range for most AM stations is greater than for FM, especially at night. The longer range can cause station frequencies to interfere with each other. For better radio reception, most AM radio stations boost the power levels during the day, and then reduce these levels during the night. Static can also occur when things like storms and power lines interfere with radio reception. When this happens, try reducing the treble on the radio.

Cadillac CTS/CTS-V Owner Manual - 2011

Black plate (17,1)

XM™ Satellite Radio Service XM Satellite Radio Service gives digital radio reception from coast to coast in the 48 contiguous United States, and in Canada. Just as with FM, tall buildings or hills can interfere with satellite radio signals, causing the sound to fade in and out. In addition, traveling or standing under heavy foliage, bridges, garages, or tunnels may cause loss of the XM signal for a period of time. Cellular Phone Usage Cellular phone usage may cause interference with the vehicle's radio. This interference may occur when making or receiving phone calls, charging the phone's battery, or simply having the phone on. This interference can cause an increased level of static while listening to the radio. If static is received while listening to the radio, unplug the cellular phone and turn it off.

Backglass Antenna The AM-FM antenna is integrated with the rear window defogger, located in the rear window. Make sure that the inside surface of the rear window is not scratched and that the lines on the glass are not damaged. If the inside surface is damaged, it could interfere with radio reception. For proper radio reception, the antenna connector needs to be properly attached to the post on the glass. If a cellular telephone antenna needs to be attached to the glass, make sure that the grid lines for the AM-FM antenna are not damaged. There is enough space between the grid lines to attach a cellular telephone antenna without interfering with radio reception. Notice: Using a razor blade or sharp object to clear the inside rear window can damage the rear window antenna and/or the rear window defogger. Repairs would

Infotainment System 7-17

not be covered by the vehicle warranty. Do not clear the inside rear window with sharp objects. Notice: Do not apply aftermarket glass tinting with metallic film. The metallic film in some tinting materials will interfere with or distort the incoming radio reception. Any damage caused to your backglass antenna due to metallic tinting materials will not be covered by the vehicle warranty.

Multi-Band Antenna The antenna located on the roof of the vehicle is used for the OnStar, XM Satellite Radio Service System, and GPS (Global Positioning System), if the vehicle has these features. Keep the antenna clear of obstructions for clear reception. If the vehicle has a sunroof and it is open, the performance of OnStar, XM, and GPS can be affected.

Cadillac CTS/CTS-V Owner Manual - 2011

Black plate (18,1)

7-18

Infotainment System

Audio Players

CD Player The infotainment system's CD player can play audio CDs and MP3 CDs. CDs that are 8 cm (3 in) in diameter will not work in the CD player.

Care of CDs If playing a CD, the sound quality can be reduced due to disc quality, the method of recording, the quality of the music that has been recorded, and the way the disc has been handled. Handle discs carefully. Store CDs in their original cases or other protective cases and away from direct sunlight and dust. The CD player scans the bottom surface of the disc. If the surface of a disc is damaged, such as cracked, broken, or scratched, the disc may not play properly or not at all. Do not touch the bottom side of a disc while handling it; this could damage

the surface. Pick up discs by grasping the outer edges or the edge of the hole and the outer edge. If the surface of a disc is soiled, take a soft, lint‐free cloth or dampen a clean, soft cloth in a mild, neutral detergent solution mixed with water, and clean it. Make sure the wiping process starts from the center to the edge.

Care of the CD Player Do not add a label to a disc; it could get caught in the CD player. If a label is needed, label the top of the recorded disc with a marking pen. The use of disc lens cleaners for discs is not advised, due to the risk of contaminating the lens of the disc optics with lubricants internal to the CD player mechanism. Notice: If a label is added to a CD, or more than one CD is inserted into the slot at a time, or an attempt is made to play scratched or damaged CDs, the CD player could be damaged.

While using the CD player, use only CDs in good condition without any label, load one CD at a time, and keep the CD player and the loading slot free of foreign materials, liquids, and debris. Control Buttons The buttons used to control the CD player are: CD: Press to play a CD when listening to the radio. The disc and/or track number display when a CD is in the player. ¨ SEEK/© SEEK: Press to select tracks. TUNE/TONE: Turn and then press to select tracks. MENU/SELECT: Turn and then press to select. r /j (Play/Pause): Press to pause and restart CD playback. s REV (Fast Reverse): Press and hold to reverse playback quickly within a track.

Cadillac CTS/CTS-V Owner Manual - 2011

Black plate (19,1)

\ FWD (Fast Forward): Press and hold to advance playback quickly within a track. ^ (Load): Press to load CDs into the Six-Disc CD player. Z (Eject): Press to eject the disc. For the Six-Disc CD player, press and hold for two seconds to eject all discs. Inserting a CD (Single Disc Player) With the printed side facing up, insert a CD into the audio CD slot until it is drawn in. The CD track number and a Shuffle tab display and playback begins. If the ignition or radio is turned off while a CD is in the player, it stays in the player. When the ignition or radio is turned on, the CD starts playing where it stopped, if it was the last selected audio source.

Inserting a CD (Six-Disc CD Player) ^ (Load): Press to load CDs into the CD player. This CD player holds up to six CDs. To insert one CD: 1. Press and release the load

button.

2. Wait for the message to insert

the disc.

3. Load a CD. Insert the CD

partway into the slot, label side up. The player pulls the CD in. A Shuffle tab and the DISC icon display.

4. Press the softkey located below the Shuffle tab to play the tracks of a current disc in random order. Press the softkey again to turn Shuffle off. Shuffle Off displays.

5. The CD resumes normal

playback.

Infotainment System 7-19

To insert multiple CDs:

1. Press and hold the ^ button

for five seconds. A beep sounds and Load All Discs displays.

2. Follow the displayed instruction on when to insert the discs. The CD player takes up to six CDs.

3. Press the ^ button again to

cancel loading more CDs.

If the ignition or radio is turned off while a CD is in the player, it stays in the player. When the ignition or radio is turned on, the CD starts playing where it stopped, if it was the last selected audio source. When a CD is inserted, the disc number displays on the upper right side of the screen and the track number displays at the left and center of the screen. The Shuffle and Disc labels appear below.

Cadillac CTS/CTS-V Owner Manual - 2011

Black plate (20,1)

7-20

Infotainment System

Press the softkeys located under the Disc tab to change to another disc. The CD begins playback of the first track on the selected disc. As each new track starts to play, the track number displays in the left and center of the screen. Playing a CD

Selecting a CD Track Tracks can be selected using the seek buttons, TUNE/TONE knob, or the MENU/SELECT knob. To use the seek buttons: Press the © SEEK button to go to the start of the current track, if more than five seconds have played. Press the ¨ SEEK button to go to the next track. If © SEEK or ¨ SEEK is held, or pressed multiple times, the player continues moving backward or forward through the tracks on the CD.

To use the TUNE/TONE knob or the MENU/SELECT knob: Turn the TUNE/TONE knob or the MENU/SELECT knob to highlight the desired track, then press the TUNE/TONE knob or MENU/ SELECT knob to select the track.

Fast Forward and Rewind s REV (Fast Reverse): Press and hold to reverse playback quickly within a track. Sound is heard at a reduced volume and the elapsed time of the track displays. Release to resume playing the track. \ FWD (Fast Forward): Press and hold to advance playback quickly within a track. Sound is heard at a reduced volume and the elapsed time of the track displays. Release to resume playing the track.

Playing Tracks in Random Order Press the softkey under the Shuffle tab to play the tracks of a CD in random order. Press again to turn Shuffle off. Shuffle Off displays.

For vehicles with a Radio with Six-Disc CD player, the shuffle feature only works on the disc that is currently playing. Playing an MP3/WMA Disc CD players with the MP3 feature are capable of playing an MP3/WMA CD-R or CD-RW disc. See MP3 on page 7‑25 for more information. Disc Messages If this message DISC ERROR: displays and/or the disc ejects, it could be for one of the following reasons:

The radio system does not support the playlist format, the compressed audio format, or the data file format. It is very hot. When the temperature returns to normal, the disc should play. The road is very rough. When the road becomes smoother, the disc should play.

Cadillac CTS/CTS-V Owner Manual - 2011

Black plate (21,1)

The disc is dirty, scratched, wet, or upside down. The air is very humid. If so, wait about an hour and try again. There was a problem while burning the disc. The label is caught in the CD/DVD-A player.

If the disc is not playing correctly, for any other reason, try a known good disc. If any error occurs repeatedly or if an error cannot be corrected, contact your dealer. If the radio displays an error message, write it down and provide it to your dealer when reporting the problem.

CD/DVD Player The infotainment system's CD/DVD player can play audio discs and MP3 discs. Discs that are 8 cm (3 in) in diameter will not work in the CD/DVD player. The CD/DVD player does not support the playback of DVD video discs. If a DVD video disc is inserted into the player, the radio displays “Read Error Please Check Disc” and ejects the disc.

Care of CDs and DVDs If playing a CD/DVD, the sound quality can be reduced due to disc quality, the method of recording, the quality of the music that has been recorded, and the way the disc has been handled. Handle discs carefully. Store CDs and DVDs in their original cases or other protective cases and away from

Infotainment System 7-21

direct sunlight and dust. The CD/DVD player scans the bottom surface of the disc. If the surface of a disc is damaged, such as cracked, broken, or scratched, the disc may not play properly or not at all. Do not touch the bottom side of a disc while handling it; this could damage the surface. Pick up discs by grasping the outer edges or the edge of the hole and the outer edge. If the surface of a disc is soiled, take a soft, lint‐free cloth or dampen a clean, soft cloth in a mild, neutral detergent solution mixed with water, and clean it. Make sure the wiping process starts from the center to the edge.

Care of the CD/DVD Player Do not add a label to a disc; it could get caught in the CD/DVD player. If a label is needed, label the top of the recorded disc with a marking pen.

Cadillac CTS/CTS-V Owner Manual - 2011

Black plate (22,1)

7-22

Infotainment System

The use of disc lens cleaners for discs is not advised, due to the risk of contaminating the lens of the disc optics with lubricants internal to the CD/DVD player mechanism. Notice: If a label is added to a disc, or more than one disc is inserted into the slot at a time, or an attempt is made to play scratched or damaged discs, the CD/DVD player could be damaged. While using the CD/ DVD player, use only discs in good condition without any label, load one dosc at a time, and keep the CD/DVD player and the loading slot free of foreign materials, liquids, and debris. Control Buttons The buttons used to control the CD/DVD player are: CD/AUX (CD/Auxiliary): Press to switch between CD/DVD, auxiliary input, and USB devices.

In CD or

¨ SEEK/© SEEK: Press to select tracks. TUNE/TONE: Turn and then press to select tracks. MENU/SELECT: Turn and then press to select. r /j (Play/Pause): Press to pause and restart CD or DVD playback. s REV (Fast Reverse): MP3 playback mode, press and hold to reverse playback quickly within a track. Sound is heard at a reduced volume. When released, normal playback resumes and the elapsed time of the track displays. In DVD‐Audio playback mode, press once to change playback to a speed of 2X. Each successive press changes playback to a speed of 4X, 10X, or 21X. Press r / j to resume normal playback. \ FWD (Fast Forward): MP3 playback mode, press and hold to advance playback quickly within a track. Sound is heard at a

In CD or

reduced volume. When released, normal playback resumes and the elapsed time of the track displays. In DVD‐Audio playback mode, press once to change playback to a speed of 2X. Each successive press changes playback to a speed of 4X, 10X, or 21X. Press r / j to resume normal playback. Z (Eject): Press to eject the disc. Inserting a Disc With the printed side facing up, insert a disc into the audio CD/DVD slot until it is drawn in. The disc track number and a Shuffle tab display and playback begins. If the ignition or radio is turned off while a disc is in the player, it stays in the player. When the ignition or radio is turned on, the disc starts playing where it stopped, if it was the last selected audio source.

Cadillac CTS/CTS-V Owner Manual - 2011

Black plate (23,1)

Playing a CD

Selecting a CD Track Tracks can be selected using the seek buttons, TUNE/TONE knob, or the MENU/SELECT knob. To use the seek buttons: Press the © SEEK button to go to the start of the current track, if more than five seconds have played. Press the ¨ SEEK button to go to the next track. If © SEEK or ¨ SEEK is held, or pressed multiple times, the player continues moving backward or forward through the tracks on the CD. To use the TUNE/TONE knob: Turn the TUNE/TONE knob to highlight the desired track, then press the TUNE/TONE knob to select the track.

To use the MENU/SELECT knob: Turn the MENU/SELECT knob to highlight the desired track, then press the MENU/SELECT knob to select the track.

Fast Forward and Rewind s REV (Fast Reverse): Press and hold to reverse playback quickly within a track. Sound is heard at a reduced volume and the elapsed time of the track displays. Release to resume playing the track. \ FWD (Fast Forward): Press and hold to advance playback quickly within a track. Sound is heard at a reduced volume and the elapsed time of the track displays. Release to resume playing the track.

Playing Tracks in Random Order Press the softkey under the Shuffle tab to play the tracks of a CD in random order. Press again to turn Shuffle off. Shuffle Off displays.

Infotainment System 7-23

Playing a DVD-A (Audio) Disc The Radio with DVD Audio, HDD, and USB is capable of playing DVD audio discs in the Bose® 5.1 Cabin surround sound system. Insert the DVD audio disc into the CD/DVD player. DVD Audio displays and playback begins. The Group and track number display during playback.

Selecting a DVD‐A Track Tracks can be selected using the seek buttons, or the TUNE/ TONE knob. To use the seek buttons: Press the © SEEK button to go to the start of the current track, if more than five seconds have played. Press the ¨ SEEK button to go to the next track. If the © SEEK or ¨ SEEK button is held, or pressed multiple times, the player continues moving backward or forward through the tracks within the current group.

Cadillac CTS/CTS-V Owner Manual - 2011

Black plate (24,1)

7-24

Infotainment System

To use the TUNE/TONE knob: Turn the TUNE/TONE knob to display a list of all tracks in all groups on the DVD audio disc and to highlight tracks. Stop turning the TUNE/TONE knob or press the TUNE/TONE knob to start playback of the highlighted track. To use the MENU/SELECT knob: Press the softkey under the Menu tab to display a list of all Groups. To change Groups, turn the MENU/SELECT knob to highlight the desired Group. Press the MENU/SELECT knob to select it. Playback begins from track 1 of the highlighted Group.

Fast Forward and Rewind s REV (Fast Reverse): Press to reverse playback quickly within a track. Sound is heard at a reduced volume. Press once to change playback to a speed of 2X. Each successive press changes playback

to a speed of 4X, 10X, or 21X. Press r / j to resume normal playback. \ FWD (Fast Forward): Press to advance playback quickly within a track. Sound is heard at a reduced volume. Press once to change playback to a speed of 2X. Each successive press changes playback to a speed of 4X, 10X, or 21X. Press r / j to resume normal playback.

Playing Tracks in Random Order Press the softkey under the Shuffle tab to begin random playback of all songs in the current Group. Press again to turn off random playback.

Stopping DVD Audio Playback Press the softkey under the c tab to stop playback of the DVD audio disc. “DVD PreStop” displays. Press the r / j button to resume playback from where it was stopped.

Press the softkey under the c tab again while in DVD PreStop. “DVD Stop” displays. Press the r / j button while in DVDStop to begin playback from the beginning of the DVD audio disc. Press the r / j button during DVD audio playback to pause or resume playback.

Selecting DVD Audio Streams Each DVD audio Group may contain audio content that is encoded in one or two formats. For example, a particular Group may have both a 5.1 surround audio stream and a 2.0 stereo audio stream available. Press the softkey located under the Audio tab to display the current audio stream playing. “Audio Stream 1” or “Audio Stream 2” briefly displays. Press the softkey located under the Audio tab again to toggle between Audio Stream 1 or Audio Stream 2 (if available).

Cadillac CTS/CTS-V Owner Manual - 2011

Black plate (25,1)

Check the DSP settings to determine if a 5.1 surround sound audio stream is playing. See Operation on page 7‑2 for more information. Press the DSP tab to see if the 5.1 + Normal or 5.1 + Rear settings are available for selection. If these settings are available, Audio Stream 1 is playing. Playing an MP3/WMA Disc CD/DVD players with the MP3
feature are capable of playing an MP3/WMA on DVD+/−R, CD−R, or CD−RW discs. For more information, see MP3 on page 7‑25. Disc Messages DISC ERROR: If this message displays and/or the disc ejects, it could be for one of the following reasons:

The radio system does not support the playlist format, the compressed audio format, or the data file format.

It is very hot. When the temperature returns to normal, the disc should play. The road is very rough. When the road becomes smoother, the disc should play. The disc is dirty, scratched, wet, or upside down. The air is very humid. If so, wait about an hour and try again. There was a problem while burning the disc. The label is caught in the CD/DVD player.

If the disc is not playing correctly, for any other reason, try a known good disc. If any error occurs repeatedly or if an error cannot be corrected, contact your dealer. If the radio displays an error message, write it down and provide it to your dealer when reporting the problem.

Infotainment System 7-25

MP3

MP3/WMA Format The Single CD and the Six-Disc CD Radio will play MP3/WMA files that were recorded on a CD−R or CD−RW disc. The HDD Radio can also play MP3/WMA files recorded on DVD+/−R discs or stored on a USB storage device. Some USB storage devices may not be supported. The files can be recorded with the following fixed bit rates: 32 kbps, 40 kbps, 56 kbps, 64 kbps, 80 kbps, 96 kbps, 112 kbps, 128 kbps, 160 kbps, 192 kbps, 224 kbps, 256 kbps, and 320 kbps or a variable bit rate. Song title, artist name, and album can display when files are recorded using ID3 tags version 1 and 2.

Cadillac CTS/CTS-V Owner Manual - 2011

Black plate (26,1)

7-26

Infotainment System

Creating an MP3/WMA Disc When creating an MP3/WMA disc: . Make sure the MP3/WMA files

are recorded on a CD−R or CD−RW disc.

. Do not mix standard audio and

MP3/WMA files on one disc. . Make sure the CD does not

have more than a maximum of 50 folders and playlists, and 255 files to read and play.

. Create a folder structure that

makes it easy to find songs while driving. Organize songs by albums using one folder for each album. Each folder or album should contain 18 songs or less.

. Avoid subfolders. The system can support up to 8 subfolders deep. Keep the total number of folders to a minimum to reduce the complexity and confusion during playback.

. Create playlists that have a .m3u

or .wpl extension; other file extensions may not work.

. Minimize the length of the file, folder, or playlist names. Long file, folder, or playlist names, or a combination of a large number of files, folders, or playlists can cause the player to be unable to play up to the maximum number of files, folders, playlists, or sessions. Finalize the audio disc before burning it. Adding music to an existing disc can cause the disc not to function.

Playlists can be selected by using the previous and next folder buttons, the SEEK arrows, or the \ FWD or s REV buttons. An MP3/WMA CD-R or CD-RW that was recorded using no file folders can also be played. If a CD-R or CD-RW contains more than the maximum of 50 folders and playlists, and 255 files, the player lets you access and navigate up to the maximum, but all items over the maximum are not accessible.

The HDD Radio can support more than 255 files on an MP3/WMA disc. The HDD Radio does not support playlists on a disc or USB storage device.

Root Directory The root directory of the CD-R or CD-RW is treated as a folder. If the root directory has compressed audio files, the directory displays as F1 DISC. All files contained directly under the root directory are accessed prior to any root directory folders. Playlists (Px) are always accessed after root folders or files. The HDD Radio displays the root directory of an MP3/WMA disc as F1 MP3 and the root directory of a USB storage device as F1 USB.

Cadillac CTS/CTS-V Owner Manual - 2011

Black plate (27,1)

Empty Directory or Folder If a root directory or a folder exists somewhere in the file structure that contains empty folders and no compressed files in them, the player advances to the next folder in the file structure that contains compressed audio files.

No Folder When the CD contains only compressed files, the files are located under the root folder. The next and previous folder functions do not display on a CD that was recorded without folders or playlists. The radio displays F1 DISC for the root directory. When the CD contains only playlists and compressed audio files, but no folders, all files are located under the root folder. The folder down and the folder up buttons search playlists (Px) first and then go to the root folder. The radio displays F1 DISC for the root directory.

Order of Play Tracks recorded to the CD-R or CD-RW play in the following order: . Play begins from the first track in the first folder and continues sequentially through all tracks in each folder. When the last track of the last folder has played, play continues from the first track of the first playlist. ‐ Playlists can be changed by

pressing the next and previous folder button.

. Play begins from the first track in

the first playlist and continues sequentially through all tracks in each playlist. When the last track of the last playlist has played, play continues from the first track of the first folder.

When play enters a new folder, the display does not automatically show the new folder name unless the folder mode has been chosen as the default display. The new track name displays.

Infotainment System 7-27

File System and Naming The song name that is contained in the ID3 tag displays. If the song name is not in the ID3 tag, the radio displays the file name without the extension. Track names longer than 32 characters are shortened. Parts of words on the last page of text and the extension of the file name are not displayed. The HDD Radio will display file names with the extension.

Preprogrammed Playlists Preprogrammed playlists that were created using WinAmp™, MusicMatch™, or Real Jukebox™ software can be accessed, however they cannot be edited using the radio. These playlists are special folders containing compressed audio song files. Playlists must have a file extension of PLS or M3U.

Cadillac CTS/CTS-V Owner Manual - 2011

Black plate (28,1)

7-28

Infotainment System

Playlists can be selected using the previous and next folder buttons. Tracks can be changed by pressing the seek buttons or turning the tune knob. Songs are played sequentially; press s REV or \ FWD to reverse or advance through the playing song. The HDD Radio does not support preprogrammed playlists. To create a playlist on the HDD radio from songs recorded to the HDD, see Hard Drive Device (HDD) on page 7‑29. Playing an MP3/WMA from a Disc or a USB Storage Device

Selecting an MP3 Track Tracks can be selected using the seek buttons, the TUNE/TONE knob, or the softkeys below the folder tabs on the infotainment display.

To use the seek buttons: Press the © SEEK button to go to the start of the current track, if more than five seconds have played. Press the ¨ SEEK button to go to the next track. If © SEEK or ¨ SEEK is held, or pressed multiple times, the player continues moving backward or forward through the tracks on the disc. To use the TUNE/TONE knob: Turn the TUNE/TONE knob to highlight the desired track, then press the TUNE/TONE knob to select the track. To use the softkeys below the folder tabs: S Folder (Previous Folder): Press the softkey under the Folder tab to go to the first track in the previous folder. Folder T (Next Folder): Press the softkey under the Folder tab to go to the first track in the next folder.

Fast Forward and Rewind s REV (Fast Reverse): Press and hold to reverse playback quickly within a track. Sound is heard at a reduced volume and the elapsed time of the track displays. Release to resume playing the track. \ FWD (Fast Forward): Press and hold to advance playback quickly within a track. Sound is heard at a reduced volume and the elapsed time of the track displays. Release to resume playing the track.

Searching for MP3 Tracks Tracks can be searched for by using the menu system. To use the menu system: 1. Press the MENU/SELECT knob

to display the MP3 Menu.

2. Turn the MENU/SELECT knob to highlight an option from the MP3
Menu. The available options are:

Playlists* Tracks

Cadillac CTS/CTS-V Owner Manual - 2011

Black plate (29,1)

Folders Artists Albums Song Titles AudioBook

3. Press the MENU/SELECT knob

to select the desired option.

*The HDD Radio does not support preprogrammed playlists. To create a playlist on the HDD radio from songs recorded to the HDD, see Hard Drive Device (HDD) on page 7‑29.

Quick Jump To scroll up or down the list of Artists, Albums, or Song Titles, press and hold the softkey located under the FWD or REV tab. To jump to the beginning, middle, or last section of the list: . Press the first softkey located under the display to go to the beginning section of the list.

. Press the second softkey

located under the display to go to the middle section of the list. . Press the third softkey located under the display to go to the last section of the list.

Playing Tracks in Random Order Press the softkey under the Shuffle tab to play the tracks of the current folder in random order. Press again to turn Shuffle off. Shuffle Off displays.

Hard Drive Device (HDD) To use the HDD, tracks must be recorded from a CD, MP3 Disc, or USB device first. Recording from Audio Discs REC (Record): Press to start recording tracks from the disc while it is playing. The radio has the option to record the current track playing or all tracks from the CD. Press the softkey under the desired record option.

Infotainment System 7-29

The last radio station that was on begins playing and a status bar appears on the top of the display when the recording process starts. The status bar disappears when the process has ended. The recorded songs are now available.

Copy Protected CD(s) Make sure the disc is not copy-protected. The radio does not copy a copy-protected CD to the HDD.

Deleting a Recorded Song or Category DEL (Delete): Press the DEL button to delete the track that is currently playing or select a track from one of the song lists. To delete an entire category, select a category and press DEL.

Cadillac CTS/CTS-V Owner Manual - 2011

Black plate (30,1)

7-30

Infotainment System

Stopping the Recording While recording from the audio CD, press the REC button to display the stop recording option. Press the softkey under this option to confirm the selection.

Ejecting a CD or Turning Off the Vehicle While Recording If the CD is ejected or the vehicle is turned off before the recording process has completed, tracks that have been completely recorded are stored to the HDD. Incomplete tracks are discarded.

Re-recording Audio CDs If a CD has already been recorded, the radio system will not record the contents again. If a partially recorded CD is selected for recording, only those songs which are not already on the HDD will be recorded.

Audio CD Song, Artist, Album, and Genre Information Radios with HDD contain a Gracenote® Database that the radio uses to determine the song, artist, album, and genre information. The Gracenote Database allows the radio to record an audio CD to the HDD and store the content using song, artist, album, and genre information. Newly released audio CDs as well as some less common audio CDs may not be found in the Gracenote Database stored on the HDD. If these audio CDs contain CD-text, the radio will use the CD-text information when recording the content to the HDD. If an audio CD is not found in the Gracenote Database and it does not have CD-text information, the radio will record the audio CD with all song, artist, album and genre names as “NO INFO.”

Songs recorded with “NO INFO” to the HDD will be hard to sort, identify, and select. To make HDD navigation easier, CDs with “NO INFO” can first be converted to MP3
format with Tag information on a home computer and then recorded to the HDD from an MP3 disc or USB device. Occasionally, the radio may find more than one match in the Gracenote Database for an audio CD that has been recorded. If this happens, the radio will display “Multi‐Hit” for the name information when the songs are selected from the HDD. With a “Muli‐Hit” song playing, press the button below the EDIT tab to bring up the list of multiple names found in the Gracenote Database. Use the MENU/SELECT knob to highlight and select the correct name for the “Multi‐Hit” recorded CD.

Cadillac CTS/CTS-V Owner Manual - 2011

Black plate (31,1)

The Gracenote Database stored on the HDD can be updated so that it includes name information for more recently released audio CDs. See your dealer for more information on Gracenote® Database updates for the HDD radio. Recording from MP3/WMA Discs or USB REC (Record): Press to start recording tracks from a MP3/WMA disc or a USB device (excluding iPods) while it is playing. The radio has the option to record the current track playing or all tracks from the CD. Press the softkey under the desired record option.

The last radio station that was on begins playing and a status bar appears on the top of the display when the recording process starts. The status bar disappears when the process has ended. The recorded songs are now available. AAC and OGG Vorbis file types are not fully supported. These file types may or may not play and may be shown without Tag information. Without Tag information available, these file types may be identified only by file name. AudioBooks from www.audible.com can also be transferred to the HDD using the record function. See “AudioBooks” later in this section for more information.

Infotainment System 7-31

USB Host Support The USB connector uses the USB standards, 1.1 and 2.0.

USB Supported Devices . USB Flash Drives . Portable USB Hard Drives Playing from the Hard Drive Device HDD (Hard Drive Device): Press the HDD button to start playing tracks from the HDD. HDD displays and playback resumes from where it was last stopped.

Cadillac CTS/CTS-V Owner Manual - 2011

Black plate (32,1)

7-32

Infotainment System

HDD Playback Mode

The infotainment system displays the current HDD playback mode. The following table shows the display mode options and what happens as the mode is displayed:

Mode Shuffle

Artist

Album

Genre

Song Playlist

AudioBook

When Displayed System is randomly playing back all HDD content. System is playing back content by a selected artist in alphabetical order. System is playing back content from a selected album in track order. System is playing back content in a selected genre in alphabetical order. System is playing back all songs in alphabetical order. System is playing back all songs from the selected playlist in the order they were added. System is playing back AudioBook content.

HDD Menu 1. Press the MENU/SELECT knob

to display the HDD Menu.

2. Turn the MENU/SELECT knob to highlight an option from the HDD Menu. The available options are:

Shuffle Songs Playlist

Artists Albums Song Titles Genres Recently Saved AudioBook

3. Press the MENU/SELECT knob

to select the desired option.

Quick Jump To scroll up or down the list of Artists, Albums, or Song Titles, press and hold the softkey under the FWD or REV tab. To jump to the beginning, middle, or last section of the list: . Press the first softkey located under the display to go to the beginning section of the list.

. Press the second softkey

located under the display to go to the middle section of the list. . Press the third softkey located under the display to go to the last section of the list.

Cadillac CTS/CTS-V Owner Manual - 2011

Black plate (33,1)

Shuffle Songs Select this option from the HDD Menu to randomly play back HDD content.

Playlist Select this option from the HDD Menu to display all six favorite playlists, then select one of the six playlists to display a list of songs that have been added to that favorite playlist. Select a song from the list to begin playback of that song and to put the HDD into the Playlist mode. See “Saving HDD Favorites” later in this section for more information.

HDD Categories The HDD category mode can be used to select a song by a particular artist, album, or genre for playback. As an example, the HDD Menu displays a layout such as:

Artists (5) Albums (6) Song Titles (77) Genres (3)

The radio system displays the number of available items in each individual category as shown on the sample display. For example, the sample display shows there is content on the hard drive from five individual artists.

Infotainment System 7-33

Select the HDD Menu category to display the available items in each individual category, then select an item from one of these submenus to display a list of songs related to that menu item. Select a song to begin playback of that song and to put the HDD in the playback mode.

Recently Saved Select this option from the HDD Menu to display the last 50 songs added since the vehicle was last turned on. The songs are categorized into songs recorded from CDs or USB devices.

AudioBook The radio is able to play back AudioBook content downloaded from www.audible.com. This content can be transferred into the HDD by either burning it to a CD or copying it to a USB storage device and then recording it to the HDD.

Cadillac CTS/CTS-V Owner Manual - 2011

Black plate (34,1)

7-34

Infotainment System

The audible.com® playback requires activation of the vehicle as a player for downloaded content. The radio system activates the audible.com system when information is found on either a CD inserted into the CD/DVD player or a USB storage device that is connected. The Vehicle Identification Number (VIN) is required in order to activate the vehicle.

Saving HDD Favorites Press the FAV button to change between favorite modes during HDD playback. The following favorite modes are supported: . Playlists . Artists . Albums . Genres

Favorites can be saved by pressing and holding the softkey under the favorites selection. Store favorites according to the following table:

Favorites Display Mode

Action on Press-and-Hold

Playlist

Artist

Album

Genre

Adds currently playing track to the playlist selected. Saves the artist associated with the currently playing track in the indicated favorites position. Saves the album associated with the currently playing track in the indicated favorites position. Saves the genre associated with the currently playing track in the indicated favorites position.

Configuring HDD Favorites Press the CONFIG button to display the radio configuration options. Press the softkey under the HDD tab to display the available favorite modes. Press the softkey under the favorite tab to set the available favorite modes. Available favorite modes are highlighted.

Time-shifting — Pause and Rewind Live FM/AM and XM™ (if equipped) The Radio with DVD Audio, HDD, and USB has the ability to rewind 60 minutes of FM/AM and XM (if equipped) content. While listening to the radio, the content from the current station is always being buffered to the HDD.

Cadillac CTS/CTS-V Owner Manual - 2011

Black plate (35,1)

Infotainment System 7-35

Press r / j (play/pause) to pause the radio. The radio display will show the Time Shift buffer status bar. The status bar shows the amount of content that is stored in the buffer and the current pause point. To resume playback from the current pause point, press r / j again. The radio will no longer be playing “live” radio. Instead, time shifted content is being played from the buffer. When the radio is playing time shifted content from the buffer, a buffer status bar shows below the station number on the left side of screen. Press and hold the REV or FWD buttons to rewind or fast forward through the time shift buffer. Hold FWD until the end of the currently recorded buffer to resume “live” radio playback. With “live” radio playing, the radio display will no longer show the buffer bar below the station number.

On AM/FM, press the REV or FWD button multiple times to rewind or fast forward. Each press will rewind or fast forward 30 seconds of content. On XM, press the REV or FWD button multiple times to jump to the previous or next song or commercial. When the radio station is changed, the buffer is cleared and automatically restarted for the current station. You cannot rewind the content from a previously tuned station. Time shifting of AM/FM or XM is not available while recording or while other sources of playback are selected.

Pausing AM/FM or XM™ (if equipped) with the Vehicle Turned Off If AM/FM or XM is paused before the vehicle is turned off, the radio will continue to buffer the current radio station for up to one hour.

If the vehicle is turned back on within one hour, the radio will automatically resume playback from the pause point.

Auxiliary Devices The 3.5 mm (1/8 in) input jack and the USB port (if equipped), located in the center console bin, allow portable devices to connect to the vehicle. This is not an audio output; do not plug headphones into the auxiliary input jack. Set up auxiliary devices while the vehicle is stopped. See Defensive Driving on page 9‑2 for more information on driver distraction. When a device is first connected to the 3.5 mm (1/8 in) input jack or the USB port (if equipped) the infotainment system automatically switches to that device. If an auxiliary device has already been connected, press the AUX or CD/AUX button.

Cadillac CTS/CTS-V Owner Manual - 2011

Black plate (36,1)

7-36

Infotainment System

3.5 mm Jack Connect a 3.5 mm (1/8 in) cable to the auxiliary input jack to use a portable audio player. Playback of an audio device that is connected to the 3.5 mm (1/8 in) jack can only be controlled using the controls on the device. VOL/ O (Volume/Power): Turn clockwise or counterclockwise to increase or decrease the volume of the portable player. Use the portable device to make additional volume adjustments. CD or CD/AUX (CD/Auxiliary): Press to play a CD when a portable audio device is playing. Press again to start playing audio from the connected portable audio player. If a portable audio player is not connected, “No Aux Device” displays. USB Port The USB connector uses the USB standards, 1.1 and 2.0.

USB Supported Devices . USB Flash Drives . Portable USB Hard Drives

Fifth generation or later iPods* First, Second, or Third generation iPod nanos* iPod classics*

*For proper operation, make sure the iPod has the latest firmware from Apple®. The iPod firmware can be updated using the latest iTunes application. See www.apple.com/itunes.

Connecting a USB Storage Device Connect the USB storage device to the USB port located in the center console. Some USB devices may not be supported.

Playing an MP3/WMA from a USB Storage Device See MP3 on page 7‑25 for more information.

Connecting an iPod To connect the iPod, connect one end of the special iPod connection cable to the iPod’s dock connector. Connect the other end to both the USB port and the auxiliary input jack located in the center console. The USB port and the auxiliary input jack are located in the center console bin. If the vehicle is on and the USB connection works, a GM logo may appear on the iPod. The iPod's music information will be shown on the radio’s display and the music begins playing through the vehicle's audio system. The iPod's battery charges while it is connected to the vehicle and if the ignition is turned to ACC/ACCESSORY or ON/RUN. It can also be left connected to the vehicle after the vehicle is turned off. With the vehicle turned off, the iPod will automatically be powered off and will not charge or draw power from the vehicle's battery.

Cadillac CTS/CTS-V Owner Manual - 2011

Black plate (37,1)

A standard iPod USB cable, like the one that came with the iPod, cannot be used to connect an iPod to the vehicle. The special iPod connection cable that came equipped with the vehicle or that was made available from your dealer must be used to command and control an iPod. Use a standard 3.5 mm (1/8 in) stereo cable to connect an older iPod model that is not supported, or if the special iPod connection cable is missing. Command and control of the iPod using the infotainment control buttons and knobs is not supported when only a 3.5 mm (1/8 in) stereo cable is used.

Commanding and Controlling an iPod An iPod™ can be controlled by using the radio buttons and knobs; the song information shows on the infotainment system's display.

To connect and control the iPod using the radio controls, use the special iPod connection cable that came as standard equipment with the vehicle as part of the USB option. The special iPod connection cable can also be purchased or made available, from your dealer. See your dealer for more information. Use the Menu/Select knob to bring up the iPod Menu and select Songs, Artists, Albums, Playlists and Audio books to play from the iPod.

Disconnecting an iPod To properly dismount the iPod USB device before disconnecting from the vehicle, press the softkey under the EJECT tab on the infotainment display screen during iPod playback.

Infotainment System 7-37

Phone

Bluetooth Vehicles with a Bluetooth® system can use a Bluetooth‐capable cell phone with a Hands‐Free Profile to make and receive phone calls. The system can be used while the ignition is in the ON/RUN or ACC/ACCESSORY position. The range of the Bluetooth system can be up to 9.1 m (30 ft). Not all phones support all functions, and not all phones are guaranteed to work with the Bluetooth system. See www.gm.com/bluetooth for more information on compatible phones.

Cadillac CTS/CTS-V Owner Manual - 2011

Black plate (38,1)

7-38

Infotainment System

Voice Recognition The Bluetooth system uses voice recognition to interpret voice commands to dial phone numbers and name tags. For additional information say “Help” while you are in a voice recognition menu. Noise: Keep interior noise levels to a minimum. The system may not recognize voice commands if there is too much background noise. When to Speak: A short tone sounds after the system responds indicating when it is waiting for a voice command. Wait until the tone and then speak.

How to Speak: Speak clearly in a calm and natural voice. Audio System When using the in‐vehicle Bluetooth system, sound comes through the vehicle's front audio system speakers and over‐rides the audio system. Use the audio system volume knob, during a call, to change the volume level. The adjusted volume level remains in memory for later calls. To prevent missed calls, a minimum volume level is used if the volume is turned down too low.

Bluetooth Controls Use the buttons located on the steering wheel to operate the in‐vehicle Bluetooth system. See Steering Wheel Controls (Audio) on page 5‑3 for more information. b g (Push To Talk): Press to answer incoming calls, to confirm system information, and to start speech recognition. c ª (Phone On Hook): Press to end a call, reject a call, or to cancel an operation. For vehicles without a navigation system, the system responds with “Ready” followed by a tone. For vehicles with a navigation system, the system responds with a tone. After the tone, say “Hands Free.” The system responds with “Ready” followed by a tone.

Cadillac CTS/CTS-V Owner Manual - 2011

Black plate (39,1)

Pairing A Bluetooth‐enabled cell phone must be paired to the in‐vehicle Bluetooth system first and then connected to the vehicle before it can be used. See the cell phone manufacturer's user guide for Bluetooth functions before pairing the cell phone. If a Bluetooth phone is not connected, calls will be made using OnStar® Hands‐Free Calling, if available. Refer to the OnStar Owner's Guide for more information. Pairing Information: . Up to five cell phones can be

paired to the Bluetooth system. The pairing process is disabled when the vehicle is moving.

. Pairing only needs to be

completed once, unless the pairing information on the cell phone changes or the cell phone is deleted from the system.

. Only one paired cell phone can be connected to the Bluetooth system at a time. If multiple paired cell phones are within range of the system, the system connects to the first available paired cell phone in the order that they were first paired to the system. To link to a different paired phone, see “Connecting to a Different Phone” later in this section.

Pairing a Phone 1. Press and hold b g for

two seconds. For vehicles with a navigation system say “Hands Free” after the tone.

2. Say “Bluetooth.” 3. Say “Pair.” The system responds with instructions and a four‐digit Personal Identification Number (PIN). The PIN will be used in Step 5.

Infotainment System 7-39

4. Start the pairing process on the cell phone that you want to pair. For help with this process, see your cell phone manufacturer's user guide.

5. Locate the device named “Your

Vehicle” in the list on the cell phone. Follow the instructions on the cell phone to enter the PIN that was provided in Step 3. After the PIN is successfully entered, the system prompts you to provide a name for the paired cell phone. This name will be used to indicate which phones are paired and connected to the vehicle. See “Listing All Paired and Connected Phones” in this section for more information.

6. Repeat Steps 1 through 5 to pair

additional phones.

Cadillac CTS/CTS-V Owner Manual - 2011

Black plate (40,1)

7-40

Infotainment System

Listing All Paired and Connected Phones 1. Press and hold b g for

two seconds. For vehicles with a navigation system say “Hands Free” after the tone.

2. Say “Bluetooth.” 3. Say “List.”

Deleting a Paired Phone 1. Press and hold b g for

two seconds. For vehicles with a navigation system say “Hands Free” after the tone.

2. Say “Bluetooth.” 3. Say “Delete.” The system asks

which phone to delete.

4. Say the name of the phone you

want to delete.

Connecting to a Different Phone To connect to a different cell phone, the Bluetooth system looks for the next available cell phone in the order in which all the available cell phones were paired. Depending on which cell phone you want to connect to, you may have to use this command several times. 1. Press and hold b g for

two seconds. For vehicles with a navigation system say “Hands Free” after the tone.

2. Say “Bluetooth.”

3. Say “Change phone.”

If another phone is found, the response will be “ is now connected.” If another phone is not found, the original phone remains connected.

Storing and Deleting Phone Numbers The system can store up to 30 phone numbers as name tags in the Hands Free Directory that is shared between the Bluetooth and OnStar systems.

Cadillac CTS/CTS-V Owner Manual - 2011

Black plate (41,1)

The following commands are used to delete and store phone numbers.

Command

Usage

Store

Digit Store

Delete

Delete All Name Tags

This command will store a phone number, or a group of numbers as a name tag. This command allows a phone number to be stored as a name tag by entering the digits one at a time. This command is used to delete individual name tags. This command deletes all stored name tags in the Hands Free Calling Directory and the OnStar Turn by Turn Destinations Directory.

Using the “Store” Command 1. Press and hold b g for

two seconds. For vehicles with a navigation system say “Hands Free” after the tone.

2. Say “Store.” 3. Say the phone number or group of numbers you want to store all at once with no pauses, then

follow the directions given by the system to save a name tag for this number.

Using the “Digit Store” Command If an unwanted number is recognized by the system, say “Clear” at any time to clear the last number.

Infotainment System 7-41

To hear all of the numbers recognized by the system, say “Verify” at any time. 1. Press and hold b g for

two seconds. For vehicles with a navigation system say “Hands Free” after the tone.

2. Say “Digit Store.” 3. Say each digit, one at a time,

that you want to store. After each digit is entered, the system repeats back the digit it heard followed by a tone. After the last digit has been entered, say “Store,” and then follow the directions given by the system to save a name tag for this number.

Using the “Delete” Command 1. Press and hold b g for

two seconds. For vehicles with a navigation system say “Hands Free” after the tone.

2. Say “Delete.” 3. Say the name tag you want to

delete.

Cadillac CTS/CTS-V Owner Manual - 2011

Black plate (42,1)

7-42

Infotainment System

Using the “Delete All Name Tags” Command This command deletes all stored name tags in the Hands Free Calling Directory and the OnStar Turn by Turn Destinations Directory. To delete all name tags: 1. Press and hold b g for

two seconds. For vehicles with a navigation system say “Hands Free” after the tone. 2. Say “Delete all name tags.” Listing Stored Numbers The list command will list all the stored numbers and name tags.

Using the “List” Command 1. Press and hold b g for

two seconds. For vehicles with a navigation system say “Hands Free” after the tone.

2. Say “Directory.” 3. Say “Hands Free Calling.” 4. Say “List.”

Making a Call

Calls can be made using the following commands.

Command

Dial or Call

Digit Dial

Re‐dial

Usage

The dial or call command can be used interchangeably to dial a phone number or a stored name tag. This command allows a phone number to be dialed by entering the digits one at a time. This command is used to dial the last number used on the cell phone.

Using the “Dial” or “Call” Command 1. Press and hold b g for

two seconds. For vehicles with a navigation system say “Hands Free” after the tone.

2. Say “Dial” or “Call.” 3. Say the entire number without pausing or say the name tag.

Once connected, the person called will be heard through the audio speakers.

Using the “Digit Dial” Command The digit dial command allows a phone number to be dialed by entering the digits one at a time. After each digit is entered, the system repeats back the digit it heard followed by a tone.

Cadillac CTS/CTS-V Owner Manual - 2011

Black plate (43,1)

Using the “Re‐dial” Command 1. Press and hold b g for

two seconds. For vehicles with a navigation system say “Hands Free” after the tone. 2. After the tone, say “Re‐dial.” Once connected, the person called will be heard through the audio speakers. Receiving a Call When an incoming call is received, the audio system mutes and a ring tone is heard in the vehicle. . Press b g to answer the call. . Press c ª to ignore a call.

Infotainment System 7-43

Call Waiting Call waiting must be supported on the Bluetooth phone and enabled by the wireless service carrier to work. . Press b g to answer an

incoming call when another call is active. The original call is placed on hold.

. Press b g again to return to the

original call. To ignore the incoming call, continue with the original call with no action.

. Press c ª to disconnect the current call and switch to the call on hold.

If an unwanted number is recognized by the system, say “Clear” at any time to clear the last number. To hear all of the numbers recognized by the system, say “Verify” at any time. 1. Press and hold b g for

two seconds. For vehicles with a navigation system say “Hands Free” after the tone.

2. Say “Digit Dial.” 3. Say each digit, one at a time,

that you want to dial. After each digit is entered, the system repeats back the digit it heard followed by a tone. After the last digit has been entered, say “Dial.”

Once connected, the person called will be heard through the audio speakers.

Cadillac CTS/CTS-V Owner Manual - 2011

Black plate (44,1)

7-44

Infotainment System

Three‐Way Calling Three‐Way Calling must be supported on the Bluetooth phone and enabled by the wireless service carrier to work. 1. While on a call press b g. 2. Say “Three‐way call.” 3. Use the dial or call command to dial the number of the third party to call.

4. Once the call is connected,

press b g to link all the callers together.

Ending a Call Press c ª to end a call.

Muting a Call During a call, all sounds from inside the vehicle can be muted so that the person on the other end of the call cannot hear them. To mute a call, press b g and then say “Mute Call.” To cancel mute, press b g and then say “Un‐mute Call.” Transferring a Call Audio can be transferred between the in‐vehicle Bluetooth system and the cell phone. The cell phone must be paired and connected with the Bluetooth system before a call can be transferred. The connection process can take up to two minutes after the ignition is turned to ON/RUN.

To Transfer Audio from the Bluetooth System to a Cell Phone 1. Press b g. 2. Say “Transfer Call.”

To Transfer Audio to the Bluetooth System from a Cell Phone During a call with the audio on the cell phone, press b g for two seconds. For vehicles with a navigation system say “Hands Free” after the tone. The audio transfers to the vehicle. If the audio does not transfer to the vehicle, use the audio transfer feature on the cell phone. See your cell phone manufacturer's user guide for more information.

Cadillac CTS/CTS-V Owner Manual - 2011

Black plate (45,1)

Infotainment System 7-45

Other Information The Bluetooth® word mark and logos are owned by the Bluetooth® SIG, Inc. and any use of such marks by General Motors is under license. Other trademarks and trade names are those of their respective owners. See Radio Frequency Statement on page 13‑18 for Federal Communications Commission (FCC) rules and Industry Canada Standards.

Voice Pass‐Thru Voice Pass‐Thru allows access to the voice recognition commands on the cell phone. See the cell phone manufacturer's user guide to see if the cell phone supports this feature. This feature can be used to verbally access contacts stored in the cell phone. 1. Press and hold b g for

two seconds.

2. Say “Bluetooth.” 3. Say “Voice.” The system

responds with “OK, accessing .”

The cell phone's normal prompt messages will go through their cycle according to the phone's operating instructions.

Dual Tone Multi‐Frequency (DTMF) Tones The Bluetooth system can send numbers and the numbers stored as name tags during a call. You can use this feature when calling a menu‐driven phone system. Account numbers can also be stored for use. 1. Press b g. 2. Say “Dial.” 3. Say the number or name tag

to send.

Clearing the System Unless information is deleted out of the in‐vehicle Bluetooth system, it will be retained indefinitely. This includes all saved name tags in the phone book and phone pairing information. For information on how to delete this information, see the previous sections on “Deleting a Paired Phone” and “Storing and Deleting Phone Numbers.”

Cadillac CTS/CTS-V Owner Manual - 2011

Black plate (46,1)

7-46

Infotainment System

2 NOTES

Cadillac CTS/CTS-V Owner Manual - 2011

Black plate (1,1)

Climate Controls

8-1

Climate Control Systems Dual Automatic Climate Control System

The heating, cooling, and ventilation for the vehicle can be controlled with this system.

Climate Controls

Climate Control Systems

Dual Automatic Climate Control

System . . . . . . . . . . . . . . . . . . . . . . 8-1

Air Vents

Air Vents . . . . . . . . . . . . . . . . . . . . . . 8-6

Maintenance