2011 Acura RDX Owners Manual

73

2011 RDX10/06/08 17:42:32 11 ACURA RDX MMC North America Owner's M 50 31STK640 enu

Multi-Information Display

The multi-information display in the instrument panel displays various information and messages when the ignition switch is in the ON (II) position. Some of the messages help you operate your vehicle more comfortably. Others help to keep you aware of the periodic maintenance your vehicle needs for continued trouble-free driving. When you open the driver's door, a ‘‘Welcome’’ message is shown on the multi-information display. When you turn the ignition switch from the ON (II) position to the ACCESSORY (I) position, a ‘‘Goodbye’’ message is shown on the display.

74

INFO BUTTONS

When you turn the ignition switch to the ON (II) position, your last selection is displayed. In the multi-information display, the system message is also displayed (see page 79) and you can customize your vehicle control settings (see page 82).

SEL/RESET BUTTON

To change the display, press the SEL/RESET button or INFO ( / ) button on the steering wheel repeatedly until the desired information appears (see page 75). You can also change the display by pressing the select/reset knob in the instrument panel.

2011 RDX10/06/08 17:42:32 11 ACURA RDX MMC North America Owner's M 50 31STK640 enu

U.S. model is shown.

IGNITION ON

Press the SEL/ RESET Button

Press the INFO (â–²/â–¼) Button

Multi-Information Display

(SH-AWD model only)

CONTINUED 75

IGNITION OFF

2011 RDX10/06/08 17:42:32 11 ACURA RDX MMC North America Owner's M 50 31STK640 enu

Multi-Information Display

Odometer The odometer shows the total distance your vehicle has been driven. It measures miles in U.S. models and kilometers in Canadian models. It is illegal under U.S. federal law and Canadian provincial/ territorial regulations to disconnect, reset, or alter the odometer with the intent to change the number of miles or kilometers indicated. Trip Meter This meter shows the number of miles (U.S.) or kilometers (Canada) driven since you last reset it. There are two trip meters: Trip A and Trip B. Each trip meter works independently, so you can keep track of two different distances. To reset a trip meter, display it, then press and hold the SEL/RESET button until the number resets to ‘‘0.0’’.

76

When you reset Trip A, AVG. FUEL A is reset at the same time. When you reset Trip B, AVG. FUEL B is reset. You can customize the Trip A and AVG. FUEL A reset condition on the multi-information display (see

page 3).

Outside Temperature Display This shows the outside temperature in Fahrenheit (U.S. models), or in Celsius (Canadian models).

The temperature sensor is in the front bumper. The temperature reading can be affected by heat reflection from the road surface, engine heat, and the exhaust from surrounding traffic. This can cause an incorrect temperature reading when your vehicle speed is under 19
mph (30 km/h). When you start your trip, the sensor is not fully acclimatized, therefore it may take several minutes until the proper temperature is displayed. In certain weather conditions, temperature readings near freezing (32°F, 0°C) could mean that ice is forming on the road surface. You can adjust the outside temperature display (see page 91).

2011 RDX10/06/08 17:42:32 11 ACURA RDX MMC North America Owner's M 50 31STK640 enu

Multi-Information Display

Maintenance MinderTM The multi-information display in the instrument panel shows you the engine oil life and maintenance service items when the ignition switch is in the ON (II) position. This information helps to keep you aware of the periodic maintenance your vehicle needs for continued trouble- free driving. Refer to page 411 for more information. INST. MPG (U.S. models)/INST. L/100 km (Canadian models) This shows your instant fuel economy. When you turn off the engine, INST. MPG or INST. L/100 km is also reset.

RANGE This shows the estimated distance you can travel on the fuel remaining in the fuel tank. This distance is estimated from the fuel economy you received over the last several miles (U.S.) or kilometers (Canada), so it will vary with changes in speed, traffic, etc. When the battery is disconnected, or you refuel, RANGE is also reset. ELAPSED TIME This shows the accumulated traveling time since you last reset it. When you turn the ignition switch to the ON (II) position, ELAPSED TIME is reset. You can customize the ELAPSED TIME reset condition on the multi- information display (see page 95).

AVG. SPEED This shows the average speed you are traveling in miles per hour (mph) for U.S. models or kilometers per hour (km/h) for Canadian models. When you reset Trip A, AVG. SPEED is also reset. AVG. FUEL A/B This shows your vehicle's average fuel economy in mpg (U.S. models) or liter/100 km (Canadian models) since you last reset Trip A or Trip B. You can customize the Trip A and AVG. FUEL A reset condition on the multi-information display (see page The average fuel economy will be reset when you reset the trip meter, or if the vehicle's battery goes dead or is disconnected.

93).

CONTINUED 77

2011 RDX10/06/08 17:42:32 11 ACURA RDX MMC North America Owner's M 50 31STK640 enu

Multi-Information Display

SH-AWD Torque Distribution Monitor OnSH-AWDmodels This monitor shows how much torque is being delivered to each wheel. For more information, see page 384. Tire Pressure Monitor You can see the pressure of each tire in this monitor. If one or more tire pressure are low, inflate them to the correct pressure. For more information, see page 392.

Temperature Gauge This shows the temperature of the engine's coolant. During normal operation, the reading should rise from the ‘‘C (Cold)’’ mark to about the middle of the gauge. In severe driving conditions, such as very hot weather or a long period of uphill driving, the reading may rise to near the ‘‘H (Hot)’’ mark of the gauge. If it reaches the ‘‘H’’ mark, pull safely to the side of the road. See page 463 for instructions and precautions on checking the engine's coolant system.

Bluetooth® HandsFreeLink® You can receive or make phone calls from your cell phone through your vehicle's Bluetooth® HandsFreeLink® (HFL) system without touching your cell phone. To use the system, your cell phone and the HFL system must be linked. Not all cell phones are compatible with this system. Refer to page 313
for instructions on how to link your cell phone to HFL and how to receive or make phone calls, or visit the acura.com/handsfreelink website. In Canada, visit www.acura.ca, or call 1-(888) 9-HONDA-9.

78

2011 RDX10/06/08 17:42:32 11 ACURA RDX MMC North America Owner's M 50 31STK640 enu

System Messages If there is a problem with your vehicle, for example, the engine oil level is low or a door is not fully closed, the multi-information display will show you the problem. It does this by interrupting the current display with one or more messages. Here is a list of messages shown on the multi-information display:

See page

20

See page

12

See page

67

See page

467

See page 467, 468

U.S.

Canada

U.S.

Canada

U.S.

Canada

Multi-Information Display

See page

393

See page

392

See page

465

See page

465

See page

466

CONTINUED 79

2011 RDX10/06/08 17:42:32 11 ACURA RDX MMC North America Owner's M 50 31STK640 enu

Multi-Information Display

SH-AWD model only

SH-AWD model only

See page

376

See page

385

See page

385

See page

32

See page

388

U.S.

Canada

U.S.

Canada

See page

395

See page

375

See page

32

See page

119

See page

68

80

See page

12

See page

354

See page

426

See page

412

See page

125

2011 RDX10/06/08 17:42:32 11 ACURA RDX MMC North America Owner's M 50 31STK640 enu

The system message(s) triggers the appropriate indicator(s) on the instrument panel, including the system message indicator, to come on. The system message indicator does not go off until the problem(s) is corrected. You will also hear a beep when the system message comes on for the first time. Most of the messages are displayed for about 5 seconds, and then the normal display returns. If there are several system messages to be shown, the display switches these messages every 5 seconds. To switch the message(s) before 5
seconds have elapsed, press the INFO ( / ) button on the steering wheel.

Multi-Information Display

SYSTEM MESSAGE INDICATOR

Press the INFO (â–²/â–¼) button

If the system message indicator remains lit on the instrument panel, you can see the corresponding message(s) again by pressing the INFO ( / ) button repeatedly.

Even if you press the INFO ( / ) button, some messages stay on or come on again at regular intervals until the problem is corrected. ● FASTEN SEAT BELT ● FASTEN PASSENGER SEAT

BELT

● RELEASE PARKING BRAKE ● DOOR & TAILGATE OPEN

81

2011 RDX10/06/08 17:42:32 11 ACURA RDX MMC North America Owner's M 50 31STK640 enu

You cannot customize the settings under these conditions: ● If you turn the ignition switch to

the ACCESSORY (I) or the LOCK (0) position.

● If you move the shift lever out of

Park.

The first customizing menu is: ● DEFAULT ALL ● CHG SETTING

If you want the settings as they were when the vehicle left the factory, select DEFAULT ALL, as described on page 85. If you want to change any vehicle control settings, select CHG SETTING, then press the SEL/ RESET button (see page 86). Refer to the table on the following pages about the settings you want to customize.

Multi-Information Display

Customized Settings With the multi-information display and the INFO ( / ) and SEL/ RESET buttons on the right side of the steering wheel, you can customize some vehicle control settings. To enter the customizing mode, press and hold the INFO ( / ) button for more than 3 seconds. To change the settings, the ignition switch must be in the ON (II) position, and the vehicle must be stopped with the transmission in Park.

82

2011 RDX10/06/08 17:42:32 11 ACURA RDX MMC North America Owner's M 50 31STK640 enu

Multi-Information Display

Customize Entry CHG SETTING (P. 86)

Customize Group METER SETUP (P. 88)

Customize Menu

Description

LANGUAGE SELECTION Changes the language used in the display.

ADJUST OUTSIDE TEMP. DISPLAY TRIP A & AVG. FUEL RESET with REFUEL ELAP. TIME RESET CONDITION

Changes the outside temperature reading above or below its current reading. Causes trip meter A and the average fuel economy to reset when you refuel. Resets the elapsed time of your current trip.

LIGHTING SETUP (P. 97)

INTERIOR LIGHT DIMMING TIME

Changes how long (in seconds) the interior lights stay on after you close the doors.

HEADLIGHT AUTO OFF TIMER

Changes how long (in seconds) the exterior lights stay on after you close the driver's door.

DOOR SETUP (P. 102)

AUTO DOOR LOCK

Changes when the system automatically locks the doors.

ê­§: Default setting

Customize Setup

ENGLISHꭧ FRENCH SPANISH －5°F ～ ꭗ0°Fꭧ ～ 5°F －3°C ～ ꭗ0°Cꭧ ～ 3°C ON OFFꭧ IGN RESETꭧ TRIP A RESET TRIP B RESET 15 sec 30 secꭧ 60 sec 0 sec 15 secꭧ 30 sec 60 sec SHIFT FROM P WITH VEH SPEEDꭧ OFF

Page

89

91

93

95

98

100

103

CONTINUED 83

2011 RDX10/06/08 17:42:32 11 ACURA RDX MMC North America Owner's M 50 31STK640 enu

Multi-Information Display

Customize Entry CHG SETTING (P. 86)

Customize Group DOOR SETUP (P. 102)

Customize Menu DOOR LOCK MODE

KEYLESS LOCK ACKNOWLEDGEMENT

SECURITY RELOCK TIMER

Description

Customize Setup

Changes which doors unlock with the remote transmitter on a first push. The exterior lights flash each time you press the LOCK or UNLOCK button. A beeper will also sound when you press the LOCK button twice. Changes how long it takes (in seconds) for the doors to relock and the security system to set after you unlock but do not open the door.

DRIVER DOORê­§ ALL DOORS ONê­§ OFF

30 secê­§ 60 sec 90 sec DRIVER DOOR WITH SHIFT TO Pê­§ ALL DOORS WITH SHIFT TO P DRIVER'S DOOR WITH IGN OFF ALL DOORS WITH IGN OFF OFF SET EXIT

Page

105

107

109

111

85

AUTO DOOR UNLOCK

Changes when the system automatically unlock the driver's/all of the doors.

Returns all settings to the factory default.

DEFAULT ALL

ê­§: Default setting

84

2011 RDX10/06/08 17:42:32 11 ACURA RDX MMC North America Owner's M 50 31STK640 enu

DEFAULT ALL

Multi-Information Display

To set the default settings, press the INFO ( / ) button to select SET then press the SEL/RESET button.

When DEFAULT ALL is set, you will see the above display for several seconds, then the screen returns to CUSTOMIZE ENTRY.

To enter the customizing mode, press and hold the INFO ( / ) button for more than 3 seconds. If you want to set the default settings, press the INFO ( / ) button to select DEFAULT ALL, then press the SEL/RESET button.

CONTINUED 85

2011 RDX10/06/08 17:42:32 11 ACURA RDX MMC North America Owner's M 50 31STK640 enu

Multi-Information Display

Change Settings You can customize some of the vehicle control settings to your preference. Here are the settings you can customize: ● METER SETUP ● LIGHTING SETUP ● DOOR SETUP While CHG SETTING in the CUSTOMIZE ENTRY is shown on the multi-information display, press the SEL/RESET button. The screen changes to METER SETUP in the CUSTOMIZE GROUP. Each time you press the INFO ( /

) button, the screen changes as shown on the next page. Press the INFO ( / ) button, until you see the setup you want to customize, then press the SEL/RESET button to enter your selection.

If DEFAULT ALL is not set, you will see the above display for several seconds, then the screen goes back to CUSTOMIZE ENTRY. Repeat the procedure to select DEFAULT ALL.

If you want to cancel DEFAULT ALL, select EXIT, then press the SEL/ RESET button. The screen goes back to CUSTOMIZE ENTRY.

86

2011 RDX10/06/08 17:42:32 11 ACURA RDX MMC North America Owner's M 50 31STK640 enu

Multi-Information Display

: Press and hold the INFO (â–²/â–¼) button (3 seconds)

: Press the SEL/RESET button or the select/ reset knob

: Press the INFO (â–²/â–¼)

button or rotate the select/reset knob

See page 88

See page 97

See page 102

CONTINUED 87

2011 RDX10/06/08 17:42:32 11 ACURA RDX MMC North America Owner's M 50 31STK640 enu

Multi-Information Display

Meter Setup Here are the four custom settings for the meter setup: ● LANGUAGE SELECTION ● ADJUST OUTSIDE TEMP.

DISPLAY

● TRIP A & AVG. FUEL RESET with

REFUEL

● ELAP. TIME RESET CONDITION While METER SETUP is shown in the CUSTOMIZE GROUP of the multi-information display, press the SEL/RESET button. Each time you press the INFO ( /

) button, the screen changes as

shown in the illustration. Press the INFO ( / ) button until you see the setting you want to customize, then press the SEL/RESET button to enter your selection.

88

: Press the SEL/

RESET button or the select/reset knob

: Press the INFO

(â–²/â–¼) button or rotate the select/ reset knob

See page 89

See page 91

See page 93

See page 95

2011 RDX10/06/08 17:42:32 11 ACURA RDX MMC North America Owner's M 50 31STK640 enu

LanguageSelection There are three language selections you can make: English, French, and Spanish. To choose the language you want, follow these instructions:

Multi-Information Display

While METER SETUP is shown in the CUSTOMIZE GROUP of the multi-information display, press the SEL/RESET button. You will see the above display.

Select the desired language by pressing the INFO ( / ) button, then enter your selection by pressing the SEL/RESET button.

CONTINUED 89

2011 RDX10/06/08 17:42:32 11 ACURA RDX MMC North America Owner's M 50 31STK640 enu

Multi-Information Display

When your choice is set, you will see the above display for several seconds, then the screen goes back to CUSTOMIZE MENU. All messages on the multi- information display will be shown in the language you selected.

If your choice is not set, you will see the above display for several seconds, then the screen goes back to CUSTOMIZE MENU. If this happens, you need to repeat the same procedure.

To exit LANGUAGE SELECTION without changing the current setting, select EXIT by pressing the INFO ( / ) button, then press the SEL/ RESET button. The screen goes back to CUSTOMIZE MENU.

90

2011 RDX10/06/08 17:42:32 11 ACURA RDX MMC North America Owner's M 50 31STK640 enu

AdjustOutsideTemp.Display If you sometimes find that the temperature reading is a few degrees above or below the actual temperature, you can adjust it by following these instructions:

Multi-Information Display

U.S.

Canada

While METER SETUP is shown in the CUSTOMIZE GROUP of the multi-information display, press the SEL/RESET button. The screen changes to CUSTOMIZE MENU. Press the INFO ( / ) button until you see the above display.

Press the SEL/RESET button. The screen changes as shown above. The highlighted number is the current setting above or below the outside temperature. Press the INFO ( / ) button repeatedly until the number you want appears, then press the SEL/RESET button to enter your selection.

CONTINUED 91

2011 RDX10/06/08 17:42:32 11 ACURA RDX MMC North America Owner's M 50 31STK640 enu

Multi-Information Display

U.S.

Canada

When your choice is set, you will see the above display for several seconds, then the screen goes back to CUSTOMIZE MENU.

If your choice is not set, you will see the above display for several seconds, then the screen goes back to CUSTOMIZE MENU. If this happens, you need to repeat the same procedure.

To exit ADJUST OUTSIDE TEMP. DISPLAY without changing the current setting, select EXIT by pressing the INFO ( / ) button, then press the SEL/RESET button. The screen goes back to CUSTOMIZE MENU.

92

2011 RDX10/06/08 17:42:32 11 ACURA RDX MMC North America Owner's M 50 31STK640 enu

TripA&Avg.FuelResetwithRefuel To cause Trip A and AVG. FUEL A to reset every time you refuel your vehicle, follow these instructions:

Multi-Information Display

While METER SETUP is shown in the CUSTOMIZE GROUP of the multi-information display, press the SEL/RESET button. The screen changes to CUSTOMIZE MENU. Press the INFO ( / ) button until you see the above display.

Press the SEL/RESET button. The screen changes as shown above. Select ON or OFF by pressing the INFO ( / ) button, then press the SEL/RESET button to enter your selection.

CONTINUED 93

2011 RDX10/06/08 17:42:32 11 ACURA RDX MMC North America Owner's M 50 31STK640 enu

Multi-Information Display

When your choice is set, you will see the above display for several seconds, then the screen goes back to CUSTOMIZE MENU.

If your choice is not set, you will see the above display for several seconds, then the screen goes back to CUSTOMIZE MENU. If this happens, you need to repeat the same procedure.

To exit TRIP A & AVG. FUEL RESET with REFUEL without changing the current setting, select EXIT by pressing the INFO ( / ) button, then press the SEL/RESET button. The screen goes back to CUSTOMIZE MENU.

94

2011 RDX10/06/08 17:42:32 11 ACURA RDX MMC North America Owner's M 50 31STK640 enu

Multi-Information Display

Elap.TimeResetCondition There are three elapsed time reset choices you can make: IGN RESET － The elapsed time is reset when you turn the ignition switch to the LOCK (0) position. TRIP A － The elapsed time is reset when Trip A is reset. TRIP B － The elapsed time is reset when Trip B is reset.

While METER SETUP is shown in the CUSTOMIZE GROUP of the multi-information display, press the SEL/RESET button. The screen changes to CUSTOMIZE MENU. Press the INFO ( / ) button until you see the above display.

Press the SEL/RESET button. The screen changes as shown above. Select the desired setting by pressing the INFO ( / ) button, then press the SEL/RESET button to enter your selection.

CONTINUED 95

2011 RDX10/06/08 17:42:32 11 ACURA RDX MMC North America Owner's M 50 31STK640 enu

Multi-Information Display

When your choice is set, you will see the above display for several seconds, then the screen goes back to CUSTOMIZE MENU.

If your choice is not set, you will see the above display for several seconds, then the screen goes back to CUSTOMIZE MENU. If this happens, you need to repeat the same procedure.

To exit ELAP. TIME RESET CONDITION without changing the current setting, select EXIT by pressing the INFO ( / ) button, then press the SEL/RESET button. The display goes back to CUSTOMIZE MENU.

96

2011 RDX10/06/08 17:42:32 11 ACURA RDX MMC North America Owner's M 50 31STK640 enu

Lighting Setup There are two settings in the lighting setup: ● INTERIOR LIGHT DIMMING TIME

● HEADLIGHT AUTO OFF TIMER While CUSTOMIZE GROUP is shown on the multi-information display, select LIGHTING SETUP by pressing the INFO ( / ) button, then press the SEL/RESET button. Each time you press the INFO ( /

) button, the screen changes as

shown in the illustration. Press the INFO ( / ) button until you see the setting you want to customize, then press the SEL/RESET button to enter your selection.

Multi-Information Display

See page 98

See page 100

: Press the SEL/RESET

button or the select/reset knob

: Press the INFO (â–²/â–¼)

button or rotate the select/reset knob

CONTINUED 97

2011 RDX10/06/08 17:42:32 11 ACURA RDX MMC North America Owner's M 50 31STK640 enu

Multi-Information Display

InteriorLightDimmingTime The interior lights fade out when you close all doors. You can change the time that the interior lights fade out.

While LIGHTING SETUP is shown in the CUSTOMIZE GROUP of the multi-information display, press the SEL/RESET button. You will see the above display.

Press the SEL/RESET button. The screen changes as shown above. Select how long you want the lights to stay on before they fade out (15, 30, or 60 seconds) by pressing the INFO ( / ) button, then press the SEL/RESET button to enter your selection.

98

2011 RDX10/06/08 17:42:32 11 ACURA RDX MMC North America Owner's M 50 31STK640 enu

Multi-Information Display

When your choice is set, you will see the above display for several seconds, then the screen goes back to CUSTOMIZE MENU.

If your choice is not set, you will see the above display for several seconds, then the screen goes back to CUSTOMIZE MENU. If this happens, you need to repeat the same procedure.

To exit INTERIOR LIGHT DIMMING TIME without changing the current setting, select EXIT by pressing the INFO ( / ) button, then press the SEL/RESET button. The screen goes back to CUSTOMIZE MENU.

CONTINUED 99

2011 RDX10/06/08 17:42:32 11 ACURA RDX MMC North America Owner's M 50 31STK640 enu

Multi-Information Display

HeadlightAutoOffTimer The headlights, parking lights, side marker lights, taillights, and license plate lights go off after the selected time when you close the driver's door and take the remote with you. To change how long the lights stay on before they go off, follow these instructions:

While LIGHTING SETUP is shown in the CUSTOMIZE GROUP of the multi-information display, press the SEL/RESET button. The screen changes to CUSTOMIZE MENU. Press the INFO ( / ) button until you see the above display.

Press the SEL/RESET button. The screen changes as shown above. Select how long you want the lights to stay on before they go off (0, 15, 30, or 60 seconds) by pressing the INFO ( / ) button, then press the SEL/RESET button to enter your selection.

100

2011 RDX10/06/08 17:42:32 11 ACURA RDX MMC North America Owner's M 50 31STK640 enu

Multi-Information Display

When your choice is set, you will see the above display for several seconds, then the screen goes back to CUSTOMIZE MENU.

If your choice is not set, you will see the above display for several seconds, then the screen goes back to CUSTOMIZE MENU. If this happens, you need to repeat the same procedure.

To exit HEADLIGHT AUTO OFF TIMER without changing the current setting, select EXIT by pressing the INFO ( / ) button, then press the SEL/RESET button. The screen goes back to CUSTOMIZE MENU.

CONTINUED 101

2011 RDX10/06/08 17:42:32 11 ACURA RDX MMC North America Owner's M 50 31STK640 enu

Multi-Information Display

Door Setup Here are the five custom settings for the door setup: ● AUTO DOOR LOCK ● DOOR LOCK MODE ● KEYLESS LOCK

ACKNOWLEDGEMENT

● SECURITY RELOCK TIMER ● AUTO DOOR UNLOCK While CUSTOMIZE GROUP is shown on the multi-information display, select DOOR SETUP by pressing INFO ( / ) button, then press the SEL/RESET button. Each time you press the INFO ( /

) button, the screen changes as

shown in the illustration. Press the INFO ( / ) button until you see the setting you want to customize, then press the SEL/RESET button to enter your selection.

102

: Press the SEL/ RESET button or the select/ reset knob

: Press the INFO

(â–²/â–¼) button or rotate the select/reset knob

See page 103

See page 105

See page 107

See page 109

See page 111

2011 RDX10/06/08 17:42:32 11 ACURA RDX MMC North America Owner's M 50 31STK640 enu

Multi-Information Display

AutoDoorLock There are three settings you can choose from: OFF － The auto door lock is deactivated all the time. WITH VEH SPD － The doors lock when the vehicle speed reaches about 9 mph (about 15
km/h). SHIFT FROM P － The doors lock whenever you move the shift lever out of Park.

While DOOR SETUP is shown in the CUSTOMIZE GROUP of the multi- information display, press the SEL/ RESET button. You will see the above display.

Press the SEL/RESET button. The screen changes as shown above. Select the desired setting by pressing the INFO ( / ) button, then press the SEL/RESET button to enter your selection.

CONTINUED 103

2011 RDX10/06/08 17:42:32 11 ACURA RDX MMC North America Owner's M 50 31STK640 enu

Multi-Information Display

When your choice is set, you will see the above display for several seconds, then the screen goes back to CUSTOMIZE MENU.

If your choice is not set, you will see the above display for several seconds, then the screen goes back to CUSTOMIZE MENU. If this happens, you need to repeat the same procedure.

To exit AUTO DOOR LOCK without changing the current setting, select EXIT by pressing the INFO ( / ) button, then press the SEL/RESET button. The screen goes back to CUSTOMIZE MENU.

104

2011 RDX10/06/08 17:42:32 11 ACURA RDX MMC North America Owner's M 50 31STK640 enu

DoorLockMode To select whether the driver's door unlocks or all the doors unlock when you unlock the doors with the remote transmitter or the key, follow these instructions.

Multi-Information Display

While DOOR SETUP is shown in the CUSTOMIZE GROUP of the multi- information display, press the SEL/ RESET button. The screen changes to CUSTOMIZE MENU. Press the INFO ( / ) button until you see the above display.

Press the SEL/RESET button. The screen changes as shown above. Select DRIVER DOOR or ALL DOORS by pressing the INFO ( /

) button, then press the SEL/

RESET button to enter your selection.

CONTINUED 105

2011 RDX10/06/08 17:42:32 11 ACURA RDX MMC North America Owner's M 50 31STK640 enu

Multi-Information Display

When your choice is set, you will see the above display for several seconds, then the screen goes back to CUSTOMIZE MENU.

If your choice is not set, you will see the above display for several seconds, then the screen goes back to CUSTOMIZE MENU. If this happens, you need to repeat the same procedure.

To exit DOOR LOCK MODE without changing the current setting, select EXIT by pressing the INFO ( / ) button, and then press the SEL/ RESET button. The screen goes back to CUSTOMIZE MENU.

106

2011 RDX10/06/08 17:42:32 11 ACURA RDX MMC North America Owner's M 50 31STK640 enu

Multi-Information Display

KeylessLockAcknowledgement When you press the UNLOCK button on the remote transmitter to unlock the doors and the tailgate, the exterior lights blink twice to verify that the doors and the tailgate are unlocked and the security system is turned off. When you push the LOCK button on the remote transmitter, some exterior lights flash, and a beeper sounds when you push the LOCK button again within 5 seconds to verify that the doors and the tailgate are locked and the security system has set (see page 294). You can customize the exterior lights not to flash and the beeper not to sound.

While DOOR SETUP is shown in the CUSTOMIZE GROUP of the multi- information display, press the SEL/ RESET button. The screen changes to CUSTOMIZE MENU. Press the INFO ( / ) button until you see the above display.

Press the SEL/RESET button. The screen changes as shown above. Select ON or OFF by pressing the INFO ( / ) button, then press the SEL/RESET button to enter your selection.

CONTINUED 107

2011 RDX10/06/08 17:42:32 11 ACURA RDX MMC North America Owner's M 50 31STK640 enu

Multi-Information Display

When your choice is set, you will see the above display for several seconds, then the screen goes back to CUSTOMIZE MENU.

If your choice is not set, you will see the above display for several seconds, then the screen goes back to CUSTOMIZE MENU. If this happens, you need to repeat the same procedure.

To exit KEYLESS LOCK ACKNOWLEDGEMENT without changing the current setting, select EXIT by pressing the INFO ( / ) button, then press the SEL/RESET button. The screen goes back to CUSTOMIZE MENU.

108

2011 RDX10/06/08 17:42:32 11 ACURA RDX MMC North America Owner's M 50 31STK640 enu

SecurityRelockTimer If you unlock the doors and the tailgate with the remote transmitter, but do not open any of the doors or the tailgate within 30 seconds, the doors and the tailgate automatically relock and the security system sets. You can change this relock time from 30 seconds to 60 or 90 seconds.

Multi-Information Display

While DOOR SETUP is shown in the CUSTOMIZE GROUP of the multi- information display, press the SEL/ RESET button. The screen changes to CUSTOMIZE MENU. Press the INFO ( / ) button until you see the above display.

Press the SEL/RESET button. The screen changes as shown above. Select the relock time you want (30, 60, or 90 seconds) by pressing the INFO ( / ) button, then press the SEL/RESET button to enter your selection.

CONTINUED 109

2011 RDX10/06/08 17:42:32 11 ACURA RDX MMC North America Owner's M 50 31STK640 enu

Multi-Information Display

When your choice is set, you will see the above display for several seconds, then the screen goes back to CUSTOMIZE MENU.

If your choice is not set, you will see the above display for several seconds, then the screen goes back to CUSTOMIZE MENU. If this happens, you need to repeat the same procedure.

To exit SECURITY RELOCK TIMER without changing the current setting, select EXIT by pressing the INFO ( / ) button, then press the SEL/ RESET button. The screen goes back to CUSTOMIZE MENU.

110

2011 RDX10/06/08 17:42:32 11 ACURA RDX MMC North America Owner's M 50 31STK640 enu

Multi-Information Display

AutoDoorUnlock There are three settings you can choose from: SHIFT TO P － The driver's door or all the doors unlock when you move the shift lever to Park with the brake pedal depressed. IGN OFF － The driver's door or all the doors unlock when you turn the ignition switch to the LOCK (0) position. OFF － The auto door unlock mode is deactivated all the time.

While DOOR SETUP is shown in the CUSTOMIZE GROUP of the multi- information display, press the SEL/ RESET button. The screen changes to CUSTOMIZE MENU. Press the INFO ( / ) button until you see the above display.

Press the SEL/RESET button. The screen changes as shown above. Select the desired setting by pressing the INFO ( / ) button, then press the SEL/RESET button to enter your selection.

CONTINUED 111

2011 RDX10/06/08 17:42:32 11 ACURA RDX MMC North America Owner's M 50 31STK640 enu

Multi-Information Display

When your choice is set, you will see the above display for several seconds, then the screen goes back to CUSTOMIZE MENU.

If your choice is not set, you will see the above display for several seconds, then the screen goes back to CUSTOMIZE MENU. If this happens, you need to repeat the same procedure.

To exit AUTO DOOR UNLOCK without changing the current setting, select EXIT by pressing the INFO ( / ) button, then press the SEL/ RESET button. The screen goes back to CUSTOMIZE MENU.

112

2011 RDX10/06/08 17:42:32 11 ACURA RDX MMC North America Owner's M 50 31STK640 enu

Controls Near the Steering Wheel

UPPER DISPLAYê­§3
(P. 173)

HAZARD WARNING BUTTON (P. 121)

HEADLIGHTS/TURN SIGNAL/FOG LIGHTS (P. 116/119)

PADDLE SHIFTERS (P. 380)

REMOTE AUDIO CONTROL BUTTONS (P. 289)

VEHICLE STABILITY ASSIST (VSA) OFF SWITCH (P. 396)

MIRROR CONTROLS (P. 146)

VOICE CONTROL BUTTONSê­§3

BLUETOOTH HANDSFREELINK BUTTONS (P. 306)

WINDSHIELD WIPERS/WASHERS/ REAR WINDOW WIPER/WASHER (P. 114/115)

HORNê­§1

STEERING WHEEL ADJUSTMENTS (P. 122)

MULTI-INFORMATION BUTTONS (P. 74)

CRUISE CONTROL BUTTONS (P. 300)

Vehicle with navigation system is shown. ê­§1: To use the horn, press the center pad of the steering wheel. ê­§2: On models without navigation system. ê­§3: Only on vehicles equipped with navigation system. Refer to the navigation system manual.

NAVIGATION SYSTEMê­§3/ CENTER DISPLAYê­§2
(P. 172)

PASSENGER AIRBAG OFF INDICATOR (P. 33)

REAR WINDOW DEFOGGER/ HEATED MIRROR BUTTON (P. 121/147)

AUXILIARY INPUT JACK (P. 291)

ACCESSORY POWER SOCKET (P. 157)

SEAT HEATER SWITCHES (P. 141)

113

2011 RDX10/06/08 17:42:32 11 ACURA RDX MMC North America Owner's M 50 31STK640 enu

Windshield Wipers and Washers

LO － The wipers run at low speed. HI － The wipers run at high speed. Windshield Washers － Pull the wiper control lever toward you, and hold it. The washers spray until you release the lever. The wipers run at low speed, then complete one more sweep after you release the lever.

MIST － The wipers run at high speed until you release the lever. OFF － The wipers are not activated. INT － The length of the wiper interval is varied automatically according to the vehicle's speed. Vary the delay by turning the adjustment ring. If you turn it to the shortest delay ( wipers change to low speed operation when the vehicle speed exceeds 12 mph (20 km/h). While the vehicle is stopped and in gear, the wipers sweep the windshield whenever you remove your foot from the brake pedal.

position), the

Windshield Wiper

ADJUSTMENT RING ADJUSTMENT RING

1. MIST 2. OFF 3. INT － Intermittent 4. LO － Low speed 5. HI － High speed 6. Windshield washers

Push the right lever up or down to select a position.

114

2011 RDX10/06/08 17:42:32 11 ACURA RDX MMC North America Owner's M 50 31STK640 enu

Windshield Wipers and Washers

OFF － The wiper is not activated. When you turn the wiper switch to OFF while the rear window wiper is in action, it will return to its parked position. When you shift the transmission to the reverse position with the front windshield wipers activated, the rear window wiper operates automatically. When the wiper control lever position is INT, the rear wiper operates intermittently. When it is LO or HI, the rear wiper operates continuously.

Rear Window Washer with Wiper － Hold past ON to turn the rear window wiper on and to spray the rear window washer. The rear window wiper makes one more sweep after you release the switch. Rear Window Washer Only － Rotate the switch counterclockwise from OFF to spray the window washer without activating the wiper. The washer will operate until you release the switch. The rear window washer uses the same fluid reservoir as the windshield washer.

Rear Window Wiper and Washer

1. ON 2. OFF 3. Rear Window Washer with Wiper 4. Rear Window Washer Only. ON － Rotate the switch clockwise to turn the rear window wiper ON. The wiper operates intermittently.

115

2011 RDX10/06/08 17:42:32 11 ACURA RDX MMC North America Owner's M 50 31STK640 enu

Turn Signals and Headlights

Turn Signal － Push down on the lever to signal a left turn and up to signal a right turn. To signal a lane change, push lightly on the lever, and hold it. The lever will return to center when you release it or complete a turn.

1. Turn signal 2. Off 3. Parking and interior lights 4. AUTO 5. Headlights on 6. High beams 7. Flash high beams 8. Fog lights off 9. Fog lights on

116

Headlights － Turning the switch to the position turns on the parking lights, taillights, instrument panel lights, side-marker lights, and rear license plate lights. Turning the switch to the turns on the headlights. When the light switch is in the

position

or

position, the lights on indicator

comes on as a reminder. This indicator stays on if you leave the light switch on and turn the ignition switch to the ACCESSORY (I) or the LOCK (0) position. If you leave the lights on with the key removed from the ignition switch, you will hear a reminder beeper when you open the driver's door.

2011 RDX10/06/08 17:42:32 11 ACURA RDX MMC North America Owner's M 50 31STK640 enu

High Beams － Push the lever forward and the high beam indicator will come on (see page 69). Pull it back to return to low beams. To flash the high beams, pull the lever back lightly, then release it. The high beams will stay on as long as you hold the lever back.

AUTO － The automatic lighting feature turns on the headlights and all other exterior lights when it senses low ambient light. To turn on automatic lighting, turn the light switch to AUTO. The lights will come on automatically when the outside light level becomes low (at dusk, for example). The lights on indicator comes on as a reminder. The lights and indicator will turn off automatically when the system senses high ambient light.

Turn Signals and Headlights

The lights will remain on when you turn off the ignition switch. They will turn off automatically when you remove the key and open the driver's door. To turn them on again, either turn the ignition switch to the ON (II) position or turn the light switch to the

position.

CONTINUED 117

2011 RDX10/06/08 17:42:32 11 ACURA RDX MMC North America Owner's M 50 31STK640 enu

Turn Signals and Headlights

Even with the automatic lighting feature turned on, we recommend that you turn on the lights manually when driving at night or in a dense fog, or when you enter dark areas such as long tunnels or parking facilities.

LIGHT SENSOR

The automatic lighting feature is controlled by a sensor located on top of the dashboard. Do not cover this sensor or spill liquids on it.

Automatic Lighting Off Feature This feature turns off the headlights, fog lights, parking lights, taillights, side marker lights, license plate lights, and instrument panel lights within 15 seconds of removing the key from the ignition switch and closing the driver's door. This feature activates if you leave the headlight switch in the position, remove the key, then open and close the driver's door.

or

118

2011 RDX10/06/08 17:42:32 11 ACURA RDX MMC North America Owner's M 50 31STK640 enu

If you remove the key from the ignition switch with the headlight switch on, but do not open the door, the lights will turn off after 10
minutes. The lights will turn on again when you unlock or open the driver's door. If you unlock the door, but do not open it within 15 seconds, the lights will go off. With the driver's door open, you will hear a lights on reminder beeper. You can change the ‘‘HEADLIGHT AUTO OFF TIMER’’ setting on the multi-information display (see page

00).

Turn Signals and Headlights

Fog Lights Turn the fog lights on and off by turning the switch next to the headlight switch. You can use the fog lights only when the headlights are on low beam. They will go off when the headlights are turned off.

position, the high beam

Daytime Running Lights With the headlight switch off or in the headlights and the high beam indicator come on with reduced brightness when you turn the ignition switch to the ON (II) position and release the parking brake. They remain on until you turn the ignition switch off, even if you set the parking brake. The headlights revert to normal operation when you turn them on with the switch. If you see a ‘‘CHECK DRL SYSTEM’’ message on the multi-information display, there is a problem with the daytime running light system. Take your vehicle to a dealer to have it checked.

119

2011 RDX10/06/08 17:42:32 11 ACURA RDX MMC North America Owner's M 50 31STK640 enu

Instrument Panel Brightness

You will hear a beep when maximum or minimum brightness is reached. You will also hear a beep when the maximum level is canceled by turning the knob a click to the left.