2004 Toyota Tundra Owners Manual

Use this button to skip up or down to a different track. the “SEEK/ Push “Ɯ” or “Ɲ” side of TRACK” button until the number of the track you want to listen to appears on the display. If you want to return to the begin- ning of the current track, quickly push the down side of the button one time. Vehicles with rear seat entertainment sys- tem— While the DVD player is in operation, the chapter or track can be changed by push- ing the “Ɯ” or “Ɲ” side of the “SEEK/ TRACK” button. ST (Stereo reception) display Your radio automatically changes to stereo reception when a stereo broadcast is re- ceived. “ST” appears on the display. If the signal becomes weak, the radio reduces the amount of channel separation to prev- ent the weak signal from creating noise. If the signal becomes extremely weak, the radio switches from stereo to mono recep- tion. TAPE Push the “TAPE” button to play a cassette tape.

209

2004 TUNDRA from Sep. ’03 Prod. (OM34426U)

’04 TUNDRA_U (L/O 0309)

in RDS

is operational only

TEXT Radio This button mode. When an RDS radio station transmits a text message, “TEXT” will be displayed. At this time, push the “TEXT” button to view the text message. The message display will be canceled if any button that affects the display is pushed. To view the mes- sage again, push this button again. After the entire message has been displayed, the message will disappear. The RDS audio system has memory to store three 64−character messages. To store a message in memory, push and hold the “TEXT” button until you hear a beep. If three messages are already stored in memory, the oldest message will be over- written by the new message. To recall a radio text message, push the “TEXT” button momentarily. This will dis- play the most recent message. Each push of the button will display messages in the order of most to least recent.

If no messages have been stored, or if there are no more messages to be re- called, “NO MESSAGE” will appear on the display, and the message display will be canceled. The message display will be canceled if you activate any function that affects the display. Compact disc player This button is used to change the display for the compact disc that contains text data. To change the display, quickly push and release the “TEXT” button while the com- pact disc is playing. The display changes in the order from the elapsed time to disc title the elapsed time. If this button is pushed while a compact disc that does not contain text data is playing, “NO TITLE” will appear on the display. If the entire disc or track title does not appear on the display, push and hold the button until you hear a beep. The rest of the title will appear.

then back

track

title,

to

to

the

“TRAF” button,

TRAF (Traffic) This button turns the traffic announcement (TA) feature on and off. This button is operational only in FM mode. By pushing “TRAF SEEK” will flash on the display and the radio will start seeking any traffic program station. When a traffic program station is found, “TRAF” will be displayed and you will hear a beep. After the traffic announcement program is over, the display returns to the previous mode. If no traffic program station is found, “NO TRAF INFO” appears on the display for a few seconds and the display returns to the previous mode. To cancel the traffic announcement, push this button again. TUNE (Tuning) Turn the “TUNE” knob clockwise to step up the frequency. Turn the knob counter- clockwise to step down the frequency.

210

2004 TUNDRA from Sep. ’03 Prod. (OM34426U)

’04 TUNDRA_U (L/O 0309)

TYPE (Program Types) When you push the “TYPE” button while receiving an RDS station, the current pro- gram type appears on the display. Each time you push this button, the pro- gram type changes as in the following: D ROCK D EASY LIS (Easy listening) D CLS/JAZZ (Classical music and Jazz) D R&B (Rhythm and Blues) D INFORM (Information) D RELIGION D MISC (Miscellaneous) D ALERT (Emergency message)

211

2004 TUNDRA from Sep. ’03 Prod. (OM34426U)

Audio remote controls (steering switches)

’04 TUNDRA_U (L/O 0309)

Some parts of the audio system can be adjusted using the switches on the steer- ing wheel. Details of the specific switches, controls, and features are described below. 1. Volume control switch 2. “ƜƝ” switch 3. “MODE” switch

212

2004 TUNDRA from Sep. ’03 Prod. (OM34426U)

’04 TUNDRA_U (L/O 0309)

to

increase while

1. Volume control switch Push “+” to increase the volume. The vol- ume continues the switch is being pushed. Push “−” the volume. The to decrease volume continues to decrease while the switch is being pushed. 2. “ƜƝ” switch Radio This switch has the following features— To select a preset station: Quickly push and release the “Ɯ” or “Ɲ” side of the switch. Do this again to select the next preset station. To seek a station: Push and hold the “Ɯ” or “Ɲ” side of the switch until you hear a beep. Do this again to find the next station. If you push the switch on either side during the seek mode, seeking will be cancelled. Cassette player This switch has the following features— To skip to a different track in either direc- tion: Quickly push and release the “Ɯ” or “Ɲ” side of the switch. “FF 1” or “REW 1” will appear on the display.

Next, push either side of the track switch until the track you want to listen to is set. If you push the switch ten times, the skip function will turn off. (You can skip up to nine tracks at a time.) When counting the number of the tracks you want to rewind, remember to count the current track as well. For example, if you want to rewind to a song that is two tracks before the song you are listening to, push the “Ɲ” side of the switch three times. If you push the track switch further than you wanted to, push the other side of the switch. The in- creased or reduced. The track number you select is not valid if the tracks remaining on the current side of the cassette. D When the tape reaches to the begin- ning, the player will automatically start playing that side.

track number will be

the number of

is higher

than

it

D After the tape reaches to the end, the reverse and

player will automatically start playing the other side.

There must be at least 3 seconds of blank space between tracks for the track switch to work correctly. In addition, the feature may not work well with some spoken, live, or classical recordings. To fast−forward or reverse: Push and hold the “Ɯ” side of the switch to fast−forward a cassette tape. “FF” will appear on the display. Push and hold the “Ɲ” side of the switch to rewind a tape. “REW” will appear on the display. To stop the tape while it is fast−forward- ing, push the “Ɯ” side of the switch. To stop the tape while it is rewinding, push the “Ɲ” side of the switch. If a tape rewinds completely, the cassette player will stop and then play that same side. If a tape fast−forwards completely, the cassette will play the other side of the tape using the auto−reverse feature. Compact disc player Use this switch to skip up or down to a different track in either direction. Quickly push and release the “Ɯ” or “Ɲ” side of the switch until the track you want to listen to is set. If you want to return to the beginning of the current track, push the “Ɲ” side of the switch once, quickly.

213

2004 TUNDRA from Sep. ’03 Prod. (OM34426U)

’04 TUNDRA_U (L/O 0309)

if

the

front audio system

Rear seat audio system— The rear seat audio system is designed for the rear seat passengers to enjoy the audio sound separately between the front seats and the rear seats. The rear seat audio system can be turned on with the rear audio system controller even is off. When the front audio is turned off, the rear audio system will be turned off simul- taneously. The rear passengers can enjoy all the modes (AM and FM radio, cassette tape player and compact disc player with changer) with the rear seat audio system when a cassette tape and a compact disc are loaded in the front audio system. When the same mode is selected on the front and rear audio systems at the same time, the system can be operated on the front audio system. If the radio mode is selected on the front and rear audio systems at the same time, AM and FM modes cannot be changed on the rear seat audio system.

With compact disc changer only— Push and hold the “Ɯ” or “Ɲ” side of the switch until the disc you want to listen to is set. 3. “MODE” switch Push “MODE” switch to select an audio mode. Each push changes the mode se- quentially if the desired mode is ready to use. To turn the audio system on, push the “MODE” switch. To turn the audio system off, push and hold the “MODE” switch until the system turns off.

214

You can enjoy the rear seat entertainment system with commercial headphone. See “—Headphone input jacks” in this Section for details. You can purchase a wireless headphone at a Toyota dealer.

CAUTION

Do not operate a vehicle while using the headphones. Doing so may cause an accident, resulting in injury.

2004 TUNDRA from Sep. ’03 Prod. (OM34426U)

’04 TUNDRA_U (L/O 0309)

The rear seat audio system consists of following components. 1. Front audio system 2. Rear seat audio system display 3. Rear seat audio system controller 4. Headphone volume control dials 5. Headphone input jacks 6. Controller holder

—Rear seat audio system controller The rear seat audio system can be oper- ated with the rear seat audio system con- troller.

CAUTION

Do not disassemble or modify the controller. It may cause an accident, fire or electric shock.

NOTICE

Keep the controller away from direct sunlight, high heat and high humidity. These conditions could cause the case to deform or the battery to ex- plode or leak.

215

2004 TUNDRA from Sep. ’03 Prod. (OM34426U)

’04 TUNDRA_U (L/O 0309)

USING THE CONTROLLER To use the rear seat audio system con- troller, direct the signal output portion of the controller to the signal reception portion of the rear seat audio system display. The rear seat audio system controller can be operated when the ignition switch is in the “ACC” or “ON” position. The controller does not operate properly when the signal reception portion of the display to direct sunlight. Block the display from direct sunlight. Details of specific buttons, controls, and see features of “CONTROLLER this Section.

the FEATURES”

controller, in

is exposed

NOTICE

Observe the followings, otherwise the controller may be damaged. z Do not drop or strongly knock the

controller against hard objects.

z Do not sit on or place heavy ob-

jects on the controller.

2004 TUNDRA from Sep. ’03 Prod. (OM34426U)

BEFORE USING THE CONTROLLER (for new vehicle owners) A battery is already set in the control- ler with an insulating sheet, which pre- from being dis- vents charged. Before using the controller, remove the insulating sheet.

the battery

216

’04 TUNDRA_U (L/O 0309)

NOTICE

Do not leave the controller exposed to high temperatures (such as on the instrument panel) time, otherwise the controller may be dam- aged.

for a

long

CONTROLLER HOLDER The controller can be stowed in the holder when it is not in use. The holder can be hooked on the back of the driv- er’s or front passenger’s seatback.

CAUTION

To reduce the chance of in case of an accident or a sudden stop while driving, stow the controller in the holder when it is not in use.

injury

217

2004 TUNDRA from Sep. ’03 Prod. (OM34426U)

” and “ ” and “

CONTROLLER FEATURES 1. “ 2. “ 3. “ON/SOURCE” button 4. “OFF” button

” (DISC/CH/PROG) buttons ” (TUNE/TRACK) buttons

’04 TUNDRA_U (L/O 0309)

1. “

” and “

” (DISC/CH/PROG) but-

tons

the “

” or “

Radio You can scan only the preset stations for the band of the front audio system. (For instructions, see “—Controls and features” in this Section.) To scan the preset stations: Push ” (DISC/CH/PROG) button. The radio will tune in the next preset station up or down the band. The station frequency will appear on the dis- play. Cassette tape player Push ” (DISC/CH/PROG) ” or “ button to select the other side of a cas- sette indicates which ” indicates side is currently selected. (“ indicates the bottom the side.) the cassette Auto−reverse player reaches the end of a tape side, it automatically reverses and begins to play the other side. This is true whether the cassette was playing or fast forwarding.

tape. The display

feature: After

top side, “

the “

”

the “

” or “

” or “

” and “

” (TUNE/TRACK) but-

” (TUNE/TRACK) buttons

Compact disc player with changer Use these buttons to select a disc you want to listen to. Push ” (DISC/CH/PROG) button until the number of the disc you want to listen appears on the display. 2. “ Radio Push the “ ton to tune or seek. Tuning: Quickly push and release the “ ” or “ ” (TUNE/TRACK) button. Each time you push the button, the radio will step up or down to another frequency. If you push and hold the button, and the radio will go into the seek mode. Seeking: Push and hold the “ ” (TUNE/ TRACK) button. The radio will seek up or down for a station of the nearest frequen- cy and will stop on reception. Each time you push the button, the stations will be searched one after another.

” or “

218

2004 TUNDRA from Sep. ’03 Prod. (OM34426U)

’04 TUNDRA_U (L/O 0309)

”

the “

” (TUNE/TRACK) button.

Cassette tape player This button has the following features— To fast forward or reverse: Push and hold ” (TUNE/TRACK) button until “FF” will appears on the dis- play to forward a tape. Push and hold the (TUNE/TRACK) button until “REW” “ appears on the display to rewind a tape. To stop the tape while it is fast forward- ing, push the “ ” (TUNE/TRACK) button. To stop the tape while it is rewinding, push the “ If a tape rewinds completely, the cassette player will stop and then play that same side. If a tape fast forwards completely, the cassette will play the other side of the tape using the auto−reverse feature. To skip up or down to locate a song or recording: You can select up to nine recordings (in- cluding current one). Push the “ ” (TUNE/TRACK) but- ton. “FF 1” or “REW 1” will appear on the display. Next, push either side of the track button until the number on the display reaches the number of tracks you want to skip. If you push the button 10 times, the skip feature will be turned off.

” or “

For the skip feature to work correctly a blank space of at least 3 seconds is con- sidered to be a start of a recording. When a beginning of a tape is reached, the player automatically resumes play. When the end of the tape is reached, the player automatically reverses sides and resumes normal play. In addition, the feature may not work well with some spoken, live, or classical re- cordings. Compact disc player This button has the following features— To skip up or down to a different track: Push the “ ” (TUNE/TRACK) but- ton until the number of the track you want to listen to appears on the display. If you the want current track, quickly push ” (TUNE/TRACK) button one time. To fast forward or reverse: Push and hold the “ ” (TUNE/ TRACK) button to fast forward or reverse within a compact disc. When you release the button, the compact disc player will resume playing.

the beginning of

to return to

” or “

” or “

the

“

3. “ON/SOURCE” button Push “ON/SOURCE” button to turn on the rear seat audio system. Use “ON/SOURCE” button to select an audio mode when the rear seat audio sys- tem is on. Each time you push this but- ton, the system changes between the ra- dio, cassette player and compact disc player. When you change the mode, the display indicates which mode is selected. When a cassette tape and compact discs are not loaded in the front audio system, only a radio mode can be selected in the rear seat audio system. If you push “ON/SOURCE” button to se- lect the casette tape player mode or com- pact disc player mode in that case, a beep sounds from front audio system and “INVALID” for 6
seconds, and then the rear audio system returns to the radio mode. If you push “ON/SOURCE” button while receiving an emergency broadcast, a beep sounds and the screen to indicate that no button can be operated.

“INVALID” appears on

the screen

flashes on

219

2004 TUNDRA from Sep. ’03 Prod. (OM34426U)

Radio AM mode When you select the AM mode, “AM” will appear on the screen. FM mode When you select the FM mode, “FM1” or “FM2” will appear on the display. If the front audio system receives a traffic the rear seat announcement (TA) while audio system the radio mode, “TRAF” will flash on the screen and the rear seat audio system will turn off. When the traffic an- nouncement (TA), the rear seat audio sys- tem cannot select the AM/FM mode. Tape mode “TAPE” appears on the screen while this mode is selected.

front audio

receives a

in

is

220

’04 TUNDRA_U (L/O 0309)

the screen while this

Compact disc mode “CD” appears on mode is selected. The screen shows the track, or track and disc number currently being played. Error messages If the player malfunctions, your audio sys- tem will screen one of the four following error messages. “WAIT”: The compact disc player unit may be too hot. Allow the player to cool down. “ERR 1”: The disc may be dirty, damaged or (up−side down). Clean the disc and re−insert it. “ERR 3”: There is a problem inside the system. Eject the disc. Set the disc again. “ERR 4”: Over−current. Ask your Toyota dealer to inspect. If the malfunction still exists, take your vehicle to your Toyota dealer. 4. “OFF” button Push “OFF” button to turn off seat audio system.

incorrectly

the rear

inserted

REPLACING CONTROLLER BATTERY For replacement, use a CR2025 lithium battery or equivalent.

CAUTION

Special care should be that small children do not swallow the re- moved battery or components.

taken

NOTICE

z When replacing the battery, be care-

ful not to lose the components.

z Replace only with

the same or equivalent type of battery recom- mended by a Toyota dealer.

z Dispose of used batteries according

to the local regulations.

2004 TUNDRA from Sep. ’03 Prod. (OM34426U)

Replace the battery by using the following procedures: 1. Pull

the case out while pushing

the

lock release button to the side.

’04 TUNDRA_U (L/O 0309)

z Be careful not to bend the electrode of the controller battery insertion and that dust or oil does not ad- here to the transmitter case.

z Close the battery case securely.

After replacing the battery, check that the controller operates properly. If the control- ler still does not operate properly, contact your Toyota dealer.

2. Remove the discharged battery. 3. Put in a new battery with the positive

(+) side up. Put in the case securely.

NOTICE

z Make sure that the positive side of the controller battery is facing cor- rectly.

z Do not replace the battery with wet

hands. Water may cause rust.

z Do not touch or move any compo- nents inside of the controller, or it may interfere with proper operation.

221

2004 TUNDRA from Sep. ’03 Prod. (OM34426U)

’04 TUNDRA_U (L/O 0309)

—Headphone input jacks

CAUTION

Adjust the volume when you connect the headphones jack. Loud sounds may have a significant impact on the human body.

the

to

You can enjoy the rear seat audio sys- tem with commercial headphone. To use the headphones, connect them to the jack. The key must be in the “ACC” or “ON” position.

To adjust the volume of the headphones, turn the knob. Turn right to increase the volume. Turn left to decrease the volume. The maximum volume depends on the type of headphones. With some headphone generally available in the market, it may be difficult to catch sound properly. Toyota recommends the use of Toyota genuine headphone. Please contact your Toyota dealer for fur- ther details.

222

2004 TUNDRA from Sep. ’03 Prod. (OM34426U)

’04 TUNDRA_U (L/O 0309)

Rear seat entertainment system—

The rear seat entertainment system con- sists of the following components. 1. Front audio system 2. Rear seat entertainment system display 3. Rear seat entertainment system

controller

4. DVD player 5. Headphone input jacks 6. Input terminal adapter 7. Power outlet 8. Headphone volume control dials 9. Controller holder 10. Power outlet main switch

223

2004 TUNDRA from Sep. ’03 Prod. (OM34426U)

’04 TUNDRA_U (L/O 0309)

You can enjoy the rear seat entertainment system with commercial headphone. See “—Headphone input jacks” in this Section for details. You can also enjoy the rear seat enter- tainment system with a wireless head- phone. The wireless headphone can be used within rear seat. If the signal be- the headphone will mute. comes weak, For details, refer the manufacturer’s instructions. With some wireless headphone generally available in the market, it may be difficult to catch sound properly. Toyota recom- mends the use of Toyota genuine wireless headphone. You can purchase a wireless headphone at a Toyota dealer.

to

CAUTION

D Do not drive with using the head- phone. Otherwise, you may be hard to hear the sound from the outside while using the headphone and may cause an accident.

D With DVD player:

that

Conversational speech on some DVDs is recorded at a low volume to emphasize the impact of sound effects. If you adjust the volume assuming the conversations represent the maximum volume lev- el that the DVD will play, you may be startled by louder sound effects or when you change to a different audio source. Be sure to adjust the volume with this in mind. Make sure the volume creased, before you headphone.

is not turn on

in- the

The rear seat entertainment system is de- signed for the rear passengers to enjoy audio and DVD video separately from the front audio system. The rear seat entertainment system can be operated when the ignition key is in the “ACC” or “ON” position. The rear passengers can enjoy all modes (AM and FM radio, cassette tape player, compact disc player with changer and DVD player) on the rear seat entertain- ment system only if a cassette tape and a compact disc are loaded in the front audio system. The rear seat entertainment system can play DVD video, audio CD, video CD, CD text, dts−CD or DVD audio only when a disc is loaded in the DVD player. You can enjoy videos and sound when your personal audio system is connected to the input terminal adapter on the rear console box. For details, the manufacturer’s instructions.

refer

to

224

2004 TUNDRA from Sep. ’03 Prod. (OM34426U)

’04 TUNDRA_U (L/O 0309)

—Display

To open the display, push the lock release button.

Push down angle.

the display

to

the desired

NOTICE

The screen should be cleaned with a dry soft cloth. If the screen is pushed by hand or wiped with a hard cloth, the surface of the screen may be scratched.

To close, push up the display until you hear a click. The illumination of the screen is automati- cally is closed. However, the rear seat entertain- ment system is not turned off.

turned off when

the display

CAUTION

To reduce the chance of in case of an accident or sudden stop while driving, close the display when it is not in use.

injury

225

2004 TUNDRA from Sep. ’03 Prod. (OM34426U)

’04 TUNDRA_U (L/O 0309)

NOTICE

z The screen should be cleaned with a dry soft cloth. If the screen is pushed by hand or wiped with a hard cloth, the screen may be scratched.

the surface of

z Benzene or alkaline solutions may damage the coated surface of the screen.

z To prevent the battery from being discharged, do not turn on the rear seat entertainment system longer than necessary when the engine is not running.

—Rear seat entertainment system controller The rear seat entertainment system can be operated with the rear seat entertain- ment system controller. The system can- not be operated by touching the switches on the screen directly.

CAUTION

Do not disassemble or modify the controller. It may cause an accident, fire or electric shock.

NOTICE

Keep the controller away from direct sunlight, high heat and high humidity. These conditions could cause the case to deform or the battery to ex- plode or leak.

226

BEFORE USING THE CONTROLLER (for new vehicle owners) A battery is already set in the control- ler with an insulating sheet, which pre- from being dis- vents charged. Before using the controller, remove the insulating sheet.

the battery

2004 TUNDRA from Sep. ’03 Prod. (OM34426U)

’04 TUNDRA_U (L/O 0309)

USING THE CONTROLLER To use the rear seat entertainment sys- tem controller, direct the signal output portion of the controller to the signal reception portion of the rear seat enter- tainment system display. The controller does not operate properly when the signal reception portion of the display to direct sunlight. Block the display from direct sunlight.

is exposed

NOTICE

Observe the followings, otherwise the controller may be damaged. z Do not drop or strongly knock the

controller against hard objects.

z Do not sit on or place heavy ob-

jects on the controller.

CONTROLLER HOLDER The controller can be stowed in the holder when it is not in use. The holder can be hooked on the back of the driv- er’s or front passenger’s seatback.

CAUTION

To reduce the chance of in case of an accident or a sudden stop while driving, stow the controller in the holder when it is not in use.

injury

227

2004 TUNDRA from Sep. ’03 Prod. (OM34426U)

’04 TUNDRA_U (L/O 0309)

NOTICE

Do not leave the controller exposed to high temperatures (such as on the instrument panel) time, otherwise the controller may be dam- aged.

for a

long

228

2004 TUNDRA from Sep. ’03 Prod. (OM34426U)

’04 TUNDRA_U (L/O 0309)

CONTROL BUTTONS 1. “

” and “

” (TUNE/TRACK) buttons

These buttons operate the front audio system or select track/chapter when the DVD player is operated.

the

2. “

” and “

” (DISC/CH/PROG) buttons These buttons skip directly to a desired preset station, disc, track or chapter.

3. “CURSOR” button

button

This control switches on the screen when the DVD player is operated.

indicates

the

4. Joy stick

This joy stick selects a control switch, mode switch on the menu for the disc.

the screen or

5. “ENT” button

This button inputs the selected switch or the selected menu for the disc.

6. “SOURCE” button

This button turns on the rear seat en- tertainment system and selects the mode.

7. “DISPLAY” button

This button adjusts tone, contrast and brightness of the screen.

the color,

229

2004 TUNDRA from Sep. ’03 Prod. (OM34426U)

’04 TUNDRA_U (L/O 0309)

8. “VIDEO” button

15. “"” button

22. “OFF” button

This button turns on the video mode when your personal audio device is connected.

9. “DVD” button

This button turns on the DVD mode.

This button plays a screen when the DVD player is operated.

This button turns off the rear seat en- tertainment system.

16. “

” button

This button pauses a screen when the DVD player is operated.

10. “RETURN” button

17. “AA” button

This button skips to the predetermined scene for the disc when the DVD play- er is operated.

11. “SET UP” button

This button indicates the initial set up screen when the DVD player is oper- ated.

12. “SEARCH” button

This button indicates the title search screen when the DVD player is oper- ated.

13. “ANGLE” button

This button selects the angle of the screen when the DVD player is oper- ated.

14. “""” button This button when the DVD player is operated.

fast

forwards a screen

This button reverse a screen when the DVD player is operated.

18. “TOP MENU” button

This button indicates the title selection screen for DVD video when the DVD player is operated.

19. “AUDIO” button

This button indicates the changing au- dio screen when is operated.

the DVD player

20. “SUB TITLE” button

This button indicates the changing sub- title screen when the DVD player is operated.

21. “MENU” button

This button indicates the menu screen for DVD video when the DVD player is operated.

230

2004 TUNDRA from Sep. ’03 Prod. (OM34426U)

—Turning the rear seat entertainment system on and off

the

turn on

the system, push

To “SOURCE” button. The screen indicates which mode can be selected. Push the “DVD” or “VIDEO” button when the connected DVD player or your personal audio machine is on. The rear seat entertainment system will be turned on. The rear seat entertainment system can se- lect all the modes. When a cassette tape, a compact disc, a DVD video disc, an audio CD, a video CD, a CD text, a dts−CD or a DVD audio disc is not loaded on the front audio sys- tem or the radio mode can be selected on the rear seat entertainment system.

the DVD player, only

’04 TUNDRA_U (L/O 0309)

—Front audio system operation All the modes of the front audio system can be operated on the rear seat enter- tainment system. When the same mode is selected on the front and rear audio systems simulta- neously, the system can be operated on the front audio system. If the radio mode is selected on the front and rear audio systems at the same time, AM and FM modes cannot be changed on the rear seat audio system.

To turn off the system, push the “OFF” button. When the front audio system is turned off, the rear audio system and the DVD player will be turned off simultaneously.

231

2004 TUNDRA from Sep. ’03 Prod. (OM34426U)

’04 TUNDRA_U (L/O 0309)

Cassette tape player and compact disc player

The mode display which is selected by the joy stick is colored blue. When the “ENT” button is pushed, the mode display changes to green. If the mode display is gray, it cannot be selected. The “Speaker sound” on the mode display is selected on the front audio system.

SELECTING THE MODE Use the mode. Push the “ENT” button to enter the mode.

to select

joy stick

the

232

Radio

2004 TUNDRA from Sep. ’03 Prod. (OM34426U)

’04 TUNDRA_U (L/O 0309)

When you select a mode, the screen indi- cates which is selected. Radio AM mode: When you select the AM mode, “AM” will appear on the screen. FM mode: When you select the FM mode, “FM1” or “FM2” will appear on the screen. Tape mode “TAPE” appears on the screen while this mode is selected. Compact disc mode “CD” appears on mode is selected. The screen shows the track, or track and disc number currently being played.

the screen while this

OPERATING FRONT AUDIO SYSTEM To operate the front audio system, use the following switches. 1. “

” (DISC/CH/PROG) but-

” and “

tons

Radio You can scan only the preset stations for the band of the front audio system. (For instructions, see “—Controls and features” in this Section.) To scan the preset stations: Push ” (DISC/CH/PROG) button. The radio will tune in the next preset station up or down the band. The station the screen.

frequency will appear on

” or “

the “

”

the “

top side, “

feature: After

tape. The screen

Cassette tape player ” (DISC/CH/PROG) ” or “ Push button to select the other side of a cas- indicates which sette ” indicates side is currently selected. (“ indicates the bottom the side.) Auto−reverse the cassette player reaches the end of a tape side, it automatically reverses and begins to play the other side. This is true whether the cassette was playing or fast forwarding. Compact disc player with changer Use these buttons to select a disc you want to listen to. Push ” (DISC/CH/PROG) button until the number of the disc you want to listen appears on the display.

” or “

the “

233

2004 TUNDRA from Sep. ’03 Prod. (OM34426U)

’04 TUNDRA_U (L/O 0309)

” or “

” and “

” (TUNE/TRACK) but-

” (TUNE/TRACK) buttons

2. “ Radio Push the “ ton to tune or seek. Tuning: Quickly push and release the “ ” or “ ” time you (TUNE/TRACK) button. Each push the button, the radio will step up or down to another frequency. If you push and hold the button, and the radio will go into the seek mode. Seeking: Push and hold the “ ” (TUNE/ TRACK) button. The radio will seek up or down for a station of the nearest frequen- cy and will stop on reception. Each time you push the button, the stations will be searched one after another. Cassette tape player This button has the following features— To fast forward or reverse: Push and hold ” (TUNE/TRACK) button until “FF” will appears on the dis- play to forward a tape. Push and hold the (TUNE/TRACK) button until “REW” “ appears on the display to rewind a tape.

” or “

the “

”

” or “

” (TUNE/TRACK) button.

To stop the tape while it is fast forward- ” (TUNE/TRACK) button. ing, push the “ To stop the tape while it is rewinding, push the “ If a tape rewinds completely, the cassette player will stop and then play that same side. If a tape fast forwards completely, the cassette will play the other side of the tape using the auto−reverse feature. To skip up or down to locate a song or recording: You can select up to nine recordings (in- cluding current one). Push the “ ” (TUNE/TRACK) but- ton. “FF 1” or “REW 1” will appear on the screen. Next, push either side of the track button until the number on the screen reaches the number of tracks you want to skip. If you push the button 10 times, the skip feature will be turned off. For the skip feature to work correctly a blank space of at least 3 seconds is con- sidered to be a start of a recording. When a beginning of a tape is reached, the player automatically resumes play. When the end of the tape is reached, the player automatically reverses sides and resumes normal play.

” or “

In addition, the feature may not work well with some spoken, live, or classical re- cordings. Compact disc player This button has the following features— To skip up or down to a different track: Push the “ ” (TUNE/TRACK) but- ton until the number of the track you want to listen to appears on the display. If you the want ” current track, quickly push (TUNE/TRACK) button one time. To fast forward or reverse: Push and hold the “ ” (TUNE/ TRACK) button to fast forward or reverse within a compact disc. When you release the button, the compact disc player will resume playing.

the beginning of

to return to

” or “

the

“

234

2004 TUNDRA from Sep. ’03 Prod. (OM34426U)

’04 TUNDRA_U (L/O 0309)

REPLACING CONTROLLER BATTERY For replacement, use a CR2025 lithium battery or equivalent.

CAUTION

Special care should be that small children do not swallow the re- moved battery or components.

taken

NOTICE

z When replacing the battery, be care-

ful not to lose the components.

z Replace only with

the same or equivalent type of battery recom- mended by a Toyota dealer.

z Dispose of used batteries according

to local regulations.

Replace the battery by using the following procedures: 1. Pull

the case out while pushing

the

lock release button to the side.

2. Remove the discharged battery. 3. Put in a new battery with the positive

(+) side up. Put it in the case securely.

NOTICE

z Be sure that the positive side of the controller battery is facing cor- rectly.

z Do not replace the battery with wet

hands. Water may cause rust.

z Do not touch or move any compo- nents inside of the controller, or it may interfere with proper operation.

235

2004 TUNDRA from Sep. ’03 Prod. (OM34426U)

—DVD player

z Be careful not to bend the electrode of the controller battery insertion and that dust or oil does not ad- here to the transmitter case.

z Close the battery case securely.

After replacing the battery, check that the controller operates properly. If the control- ler still does not operate properly, contact your Toyota dealer.

’04 TUNDRA_U (L/O 0309)

the

lid while pushing

The DVD player is set in the console box. The DVD player can play audio CDs, DVD video discs, CD texts, dts−CDs and video CDs. For appropriate discs for this player, see “Car audio/video system operating hints”. To access the DVD player, pull up the console box lock release button. The DVD player works when the ignition key is in the “ACC” or “ON” position. To turn on the DVD player, a disc must be loaded in the player. To turn off the player, eject the disc. Error messages If the player malfunctions, your audio sys- tem will display one of the three following error messages. the If screen: It indicates that the disc is dirty, damaged or it was inserted upside down. Clean the disc or insert it correctly. If “REGION CODE ERROR” appears on the screen: It indicates that the DVD re- gion code is not set properly.

“DISC CHECK” appears on

236

2004 TUNDRA from Sep. ’03 Prod. (OM34426U)

is a problem

“DVD ERROR” appears on inside

the If screen: There the player. Eject the disc. Set the disc again. If the malfunction still exists, take your vehicle to your Toyota dealer.

’04 TUNDRA_U (L/O 0309)

INSERTING THE DISC To open the DVD player, push the lid backward.

Insert a disc and push the lid forward to close the DVD player. When you insert a disc, push it in gently with the label side up. If the label faces down, the disc cannot be played. In this case, “DISC CHECK” and disc number appear on the screen. If a disc which is not playable is inserted, “DISC CHECK” will also appear on the screen. For appropriate discs for this play- er, see “Car audio/video system operating hints”. The player is intended for the use with 12
cm (4.7 in.) discs only.

237

2004 TUNDRA from Sep. ’03 Prod. (OM34426U)

’04 TUNDRA_U (L/O 0309)

—Selecting the DVD mode

The indicator light turns on while the disc is loaded. The player will play the track or chapter, and it will play from the beginning of the track or chapter again after it reaches the end.

NOTICE

Never try to disassemble or oil any part of the DVD player. Do not insert anything other than a disc into the slot.

EJECTING THE DISC Push the lid backward to open the DVD player. Push the disc eject button to eject a disc.

CAUTION

To reduce the chance of in case of an accident or a sudden stop, always keep the console box closed while driving.

injury

238

2004 TUNDRA from Sep. ’03 Prod. (OM34426U)

’04 TUNDRA_U (L/O 0309)

—DVD player operation switches

the DVD mode, push

To select “DVD” button on the controller. You can also select the DVD mode on the mode selection screen mentioned above.

the

The DVD player can be operated with the controller buttons directly. 1. “DVD” button 2. “MENU” button 3. “TOP MENU” button 4. “RETURN” button 5. “SET UP” button 6. “SEARCH” button 7. “ANGLE” button 8. “AUDIO” button 9. “SUB TITLE” button 10. “

”, “"”, “AA” and “""” buttons

the

the switch by

The player can also be operated with the switches on the screen. To operate the switches on the screen, select joy stick and push the “ENT” button. You cannot select the switches on the screen by touching them directly. When the switch is selected by the joy stick, the outline of the switch changes to blue. Push the switch will be highlighted in green.

“ENT” button, and

the

239

2004 TUNDRA from Sep. ’03 Prod. (OM34426U)

’04 TUNDRA_U (L/O 0309)

TURNING THE OPERATION SWITCHES ON AND OFF To turn on the operation switches, push the “CURSOR” button on the controller.

Top page (DVD video operation switch)

Top page (DVD audio operation switch)

240

Second page switch)

(DVD

video operation

Second page switch)

(DVD

audio operation

2004 TUNDRA from Sep. ’03 Prod. (OM34426U)

’04 TUNDRA_U (L/O 0309)

There are operation switches on the “Top Page” and “Second Page” screens. “Top To change Page” or “Second Page” switch on the screen.

the screen, push

the

Top page (video CD)

Second page (video CD)

If “ you select a switch, it the switch cannot work.

” appears on the screen when indicates that

241

2004 TUNDRA from Sep. ’03 Prod. (OM34426U)

’04 TUNDRA_U (L/O 0309)

To turn off the switches on the screen, push the “CURSOR” button on the control- ler once again or push the “Hide Keys” on the screen.

—DVD player operation (DVD video/DVD audio) NOTE: The playback condition of some DVD video discs may be determined by a DVD software producer. This DVD player plays a disc as the software pro- ducer intended. So, some functions may not work properly. Be sure to read the instruction manual for the DVD video disc separately provided. For detailed information about DVD video discs, see “—DVD video disc information” in this Section. Precautions for DVD video discs When recording on a DVD video, DVD audio, video CD or audio tracks may not record in some cases while the menu is displayed. As audio will not play in this case, verify that the video tracks are play- ing and then activate playback. When playback of a disc is completed: D If an audio CD

is playing,

the first

242

track starts.

D If a DVD video, DVD audio or video CD is playing, playback will stop or the menu screen will be displayed.

The title/chapter number and playback time display may not appear while playing back certain DVD video discs.

2004 TUNDRA from Sep. ’03 Prod. (OM34426U)

CAUTION

DVD video

Conversational speech on some DVDs is recorded at a low volume to em- phasize the impact of sound effects. If you adjust the volume assuming that the conversations represent the maximum volume level available for the DVD, you may be startled by louder sound effects or when you change to a different audio source. Loud sounds may have a significant impact on the human body or pose a driving hazard. Keep in mind when you adjust the volume.

this

DVD audio

’04 TUNDRA_U (L/O 0309)

TURNING THE MENU SCREEN FOR THE DISC ON OR OFF DVD video— To turn on the menu screen for the disc, push the “Top Menu” or the “Menu” switch on the screen. You can also turn on the menu screen by pushing the “MENU” or “TOP MENU” switch on the controller. DVD audio— To turn on the menu screen for the disc, push the screen. You can also turn on the menu screen by pushing “TOP MENU” switch on the controller. For the operation of the menu screen, see the separate manual for the DVD disc.

“Top Menu” switch on

the

the

243

2004 TUNDRA from Sep. ’03 Prod. (OM34426U)

’04 TUNDRA_U (L/O 0309)

”, “

”, “

” or “

” switches on

To select the menu for the disc, push the the “ screen. Push the “Enter” switch to select the menu for the disc. You can also select the menu for the disc by the joy stick and the “ENT” button on the controller when the control switches are not indicated on the screen. Push the “Shift Keys” on the screen, and the switches (“ ”, “Enter” and “Shift Keys” switches) will move up and down. To turn off the switch, push the “OFF” switch on the switch again, push the “ON” switch on the screen. To return to the previous screen, push the “Back” switch on the screen.

the screen. To

turn on

”, “

”, “

”, “

2004 TUNDRA from Sep. ’03 Prod. (OM34426U)

To turn on the selecting switch, push the “

” switch.

244

’04 TUNDRA_U (L/O 0309)

DVD video

DVD audio

”, “"”, “AA” AND

” switch/button: Push this switch/button

OPERATING THE “ “""” SWITCHES/BUTTONS “ to pause the disc. “"” switch/button: Push this switch/button to cancel the pause and return to normal play- ing. “AA” and “""” switches/buttons: Push and hold the “AA” or “""” switch/button to fast forward or reverse. If you want to return the current track, release the switch/button. DVD video only— “""” switch/button Push while pausing, the DVD video plays the slow−motion video replay or the slow−mo- tion video replay in reverse.

the beginning of

the “AA” or

to

DVD video

DVD audio

245

2004 TUNDRA from Sep. ’03 Prod. (OM34426U)

’04 TUNDRA_U (L/O 0309)

SELECTING THE TITLE/GROUP To display the searching title (DVD video) or group (DVD audio) screen, push the “Search” switch on the screen. You can also display the screen by pushing the “SEARCH” button on the controller.

SKIPPING TO THE PREDETERMINED SCREEN To skip to the predetermined screen, push the “Return” switch. The DVD player starts playing from the beginning of the predeter- mined screen. You can also display the screen by pushing the “RETURN” button on the controller. For the predetermined screen, see the separate manual for the DVD disc.

further details of

DVD video

DVD audio

246

2004 TUNDRA from Sep. ’03 Prod. (OM34426U)

’04 TUNDRA_U (L/O 0309)

DVD video— Select the title number by using the “−”, “+” and “+10” switches and push the “En- ter” switch to enter the number. The play- er starts playing disc for that title number. The selected title number will appear on the screen. Push the “Back” switch to return to the menu screen. DVD audio— Enter the group number by using the “−” and “+” switches. The selected group number will appear on the screen. Push the “Enter” switch. The player starts play- ing the disc from the entered group num- ber. Push the “Back” switch to return to the previous screen.

the bonus group number on

SELECTING THE BONUS GROUP DVD audio only— Enter the searching group screen and push the “En- ter” switch. The “Enter Key Code” screen will appear. To enter the number of the group you want to play, push the group number. If you enter the wrong number, push the “Clear” switch to delete the num- ber. Push the “Enter” switch on the screen. The player starts playing the disc from the selected bonus group number.

247

2004 TUNDRA from Sep. ’03 Prod. (OM34426U)

DVD video

DVD audio

’04 TUNDRA_U (L/O 0309)

CHANGING THE SUBTITLE LANGUAGE Push the “Sub Title” switch on the screen, and then the changing subtitle language screen will appear. You can also display the screen by pushing the “SUB TITLE” button on the controller.

DVD video

DVD audio

2004 TUNDRA from Sep. ’03 Prod. (OM34426U)

CHANGING THE STILL PICTURE DVD audio only— Push the “Still Prev.” or “Still Next” switch on the screen to forward or reverse the still pictures.

248

’04 TUNDRA_U (L/O 0309)

(DVD

CHANGING AUDIO LANGUAGE video only) the “Audio” switch on the screen Push and language then screen will appear. You can also display the screen by pushing the “AUDIO” button on the controller.

the changing audio

Each time you push the “Sub Title” switch, another language stored on the disc is selected. To turn off the subtitles, push the “Hide” switch. Push the “Back” switch to return to the previous screen. The selected subtitle language will appear on the screen.

249

2004 TUNDRA from Sep. ’03 Prod. (OM34426U)

’04 TUNDRA_U (L/O 0309)

CHANGING AUDIO FORMAT (DVD audio only) Push the “Audio” switch on the screen or the “AUDIO” button on the controller and the changing audio format screen will ap- pear.

2004 TUNDRA from Sep. ’03 Prod. (OM34426U)

Each time you push the “Audio” switch, another language stored on the disc is selected. The selected audio language will appear on the screen. Push the “Back” switch to return to the previous screen.

250

DVD video

DVD audio

Each time you touch the “Audio” switch, another audio format stored on the disc is selected. Push the “Back” switch to return to the previous screen.

’04 TUNDRA_U (L/O 0309)

CHANGING ANGLE SCREEN Push the “Angle” switch on the screen, and then the changing angle screen will appear. You can also display the screen by pushing the “ANGLE” button on the controller.

251

2004 TUNDRA from Sep. ’03 Prod. (OM34426U)

’04 TUNDRA_U (L/O 0309)

DVD video

DVD audio

CHANGING THE INITIAL SETTING Push the “Set Up” switch on the screen, and then the initial setting screen will ap- pear. You can also display the screen by pushing the “SET UP” button on the con- troller. You can change the initial setting. After the setting is done, the player plays from the beginning of the chapter or the track.

2004 TUNDRA from Sep. ’03 Prod. (OM34426U)

the “Angle” switch,

The angle can be selected for discs that are multi−angle compatible when the “ ” mark appears on the screen. Each time you push the angle changes. The angle number which you can select will appear on the screen. To turn off the screen, push the “Hide” switch. Push the “Back” switch to return to the previous screen.

252

’04 TUNDRA_U (L/O 0309)

the

the screen, push

There are initial setting switches on the “Setup Menu 1” and “Setup Menu 2” screens. To change “Top Page” or “Second Page” switch on the screen. After you change the initial setting, push the initial setting switch will be turned off and return to the picture previously. When the “Initial Setting” switch on “Setup Menu 2” is pushed, all menus are initial- ized.

“Enter” switch. The

the the “Select Audio

CHANGING THE AUDIO LANGUAGE Push the “Audio Lang.” switch on “Setup Menu 1” and Language” screens appear. Select the language you want to hear on the screen. To return to the “Setup Menu 1” screen, push the “Back” switch. If you cannot find a language you want to hear, push the “Others” switch. The “Enter Audio Lang. Code” screen will appear.

253

2004 TUNDRA from Sep. ’03 Prod. (OM34426U)

Setup Menu 1 screen

Setup Menu 2 screen

’04 TUNDRA_U (L/O 0309)

the

CHANGING THE SUBTITLE LANGUAGE To display “Select Subtitle Lang.”, push the “Subtitle Lang.” switch on the “Setup Menu 1” screen. Select the language you want to read on the screen. To return to the “Setup Menu 1” screen, push the “Back” switch. If you cannot find a language you want to read, push the “Others” switch. The “Enter Subtitle Lang. Code” screen will appear.

to read, push