Login- Download PDF Manual
-
146
When driving
2-1. Driving procedures
Driving the vehicle............ 148
Engine (ignition) switch.... 158
Automatic transmission.... 161
Turn signal lever .............. 165
Parking brake................... 166
Horn ................................. 167Instrument cluster Gauges and meters ......... 168
Indicators and warning lights .............................. 173
Multi-information display............................ 178
Accessory meter .............. 1842-2.
2-3. Operating the lights and
wipers Headlight switch............... 187
Fog light switch ................ 193
Windshield wipers and washer ........................... 195
Rear window wiper and washer ........................... 199
Headlight cleaner switch............................. 2012-4. Using other driving systems Cruise control................... 202
Dynamic laser cruise control ............................ 206
Intuitive parking assist...... 220
BSM (Blind Spot Monitor) ....... 227
Electronically modulated air suspension................ 233
AVS (Adaptive Variable Suspension System)...... 238
Four-wheel drive system ........................... 239
AUTO LSD system........... 244
Driving assist systems ..... 2462-5. Driving information
Off-road precautions ........ 254
Cargo and luggage .......... 259
Vehicle load limits ............ 264
Winter driving tips ............ 266
Trailer towing ................... 270
Dinghy towing .................. 290147
2-1. Driving procedures Driving the vehicle
The following procedures should be observed to ensure safe driv- ing. ■ Starting the engine (P. 158) ■ Driving
With the brake pedal depressed, shift the shift lever to D.
Release the parking brake.
(P. 161) (P. 166) Gradually release the brake pedal and gently depress the accelerator pedal to accelerate the vehicle.
■ Stopping
With the shift lever in D, depress the brake pedal. If necessary, set the parking brake. When the vehicle is stopped for an extended period of time, shift the shift lever to P or N. (P. 161)
■ Parking the vehicle
With the shift lever in D, depress the brake pedal. Set the parking brake. Shift the shift lever to P. When parking on a hill, if necessary, block the wheels. Turn the engine switch off to stop the engine. Lock the door, making sure that you have the key on your person.
(P. 166) (P. 161)
Starting on a steep uphill
With the brake pedal depressed, firmly set the parking brake and shift the shift lever to D. Gently depress the accelerator pedal. Release the parking brake.
148
2-1. Driving procedures
■Driving in the rain
●Drive carefully when it is raining, because visibility will be reduced, the
windows may become fogged-up, and the road will be slippery.
●Drive carefully when it starts to rain, because the road surface will be
especially slippery.
●Refrain from high speeds when driving on an expressway in the rain, because there may be a layer of water between the tires and the road surface, preventing the steering and brakes from operating properly.
■Engine speed while driving
In the following conditions, the engine speed may become high while driving. This is due to automatic up-shifting control or down-shifting implementation to meet driving conditions. It does not indicate sudden acceleration. ●The vehicle is judged to be driving uphill or downhill ●When the accelerator pedal is released ●When the brake pedal is depressed while S mode is selected
■Breaking in your new Toyota
To extend the life of the vehicle, the following precautions are recommended to observe: ●For the first 200 miles (300 km):
Avoid sudden stops.
●For the first 500 miles (800 km):
Do not tow a trailer.
●For the first 1000 miles (1600 km):
• Do not drive at extremely high speeds. • Avoid sudden acceleration. • Do not drive continuously in the low gears. • Do not drive at a constant speed for extended periods.
■Drum-in-disc type parking brake system
Your vehicle has a drum-in-disc type parking brake system. This type of brake system needs bedding-down of the brake shoes periodically or when- ever the parking brake shoes and/or drum are replaced. Have your Toyota dealer perform the bedding down operation.
149
2-1. Driving procedures
■Operating your vehicle in a foreign country
Comply with the relevant vehicle registration laws and confirm the availability of the correct fuel. (P. 515) ■When turning off the engine
The emission system operating sounds may continue for a short time after the engine is turned off. This is not a malfunction, and helps to ensure opti- mal performance of the emission system.
CAUTION
■When starting the vehicle
Always keep your foot on the brake pedal while stopped with the engine run- ning. This prevents the vehicle from creeping.
■When driving the vehicle
●Do not drive if you are unfamiliar with the location of the brake and accel-
erator pedals to avoid depressing the wrong pedal. • Accidentally depressing the accelerator pedal instead of the brake pedal will result in sudden acceleration that may lead to an accident that could result in death or serious injury.
• When backing up, you may twist your body around, leading to a diffi- culty in operating the pedals. Make sure to operate the pedals properly. • Make sure to keep a correct driving posture even when moving the vehicle only slightly, allowing you to depress the brake and accelerator pedals properly.
• Depress the brake pedal using your right foot. Depressing the brake pedal using your left foot may delay response in an emergency, result- ing in an accident.
●Do not drive the vehicle over or stop the vehicle near flammable materials. The exhaust system and exhaust gases can be extremely hot. This may cause a fire if there is any flammable material nearby.
●Do not let the vehicle roll backwards while the shift lever is in a driving
position, or roll forward while the shift lever is in R. Doing so may cause the engine to stall or lead to poor brake and steering performance, resulting in an accident or damage to the vehicle.
150
2-1. Driving procedures
CAUTION
■When driving the vehicle
●If the smell of exhaust is noticed inside the vehicle, open the windows and check that the back door and power back window are closed. Large amounts of exhaust in the vehicle can cause driver drowsiness and an accident, resulting in death or a serious health hazard. Have the vehicle inspected by your Toyota dealer immediately.
●Do not shift the shift lever to P while the vehicle is moving.
Doing so can damage the transmission and may result in a loss of vehicle control.
●Do not shift the shift lever to R while the vehicle is moving forward.
Doing so can damage the transmission and may result in a loss of vehicle control.
●Do not shift the shift lever to a driving position while the vehicle is moving
backward. Doing so can damage the transmission and may result in a loss of vehicle control.
●Moving the shift lever to N while the vehicle is moving will disengage the engine from the transmission. Engine braking is not available when N is selected.
●During normal driving, do not turn off the engine. Turning the engine off while driving will not cause loss of steering or braking control, but the power assist to these systems will be lost. This will make it more difficult to steer and brake, so you should pull over and stop the vehicle as soon as it is safe to do so. However, in the event of an emergency, such as if it becomes impossible to stop the vehicle in the normal way: P. 509
●Use engine braking (downshift) to maintain a safe speed when driving
down a steep hill. Using the brakes continuously may cause the brakes to overheat and lose effectiveness. (P. 161)
●When stopped on an inclined surface, use the brake pedal and parking brake to prevent the vehicle from rolling backward or forward and causing an accident.
151
2-1. Driving procedures
CAUTION
■When driving the vehicle
●Do not adjust the position of the steering wheel, the seat, or the inside or
outside rear view mirrors while driving. Doing so may result in a loss of vehicle control that can cause accidents that may result in death or serious injury.
●Always check that all passengers’ arms, heads or other parts of their bod- ies are not outside the vehicle, as this may result in death or serious injury. ●Do not drive in excess of the speed limit. Even if the legal speed limit per- mits it, do not drive over 85 mph (140 km/h) unless your vehicle has high- speed capability tires. Driving over 85 mph (140 km/h) may result in tire failure, loss of control and possible injury. Be sure to consult a tire dealer to determine whether the tires on your vehicle are high-speed capability tires or not before driving at such speeds.
●If you drive through deep water over about 20 in. (500 mm) in depth, put the vehicle height in the HI mode using the height control switch and then change to manual mode by pushing the height control mode select switch. Drive your vehicle at 18 mph (30 km/h) or less. Do not drive through water deeper than about 28 in. (700 mm) even if the vehicle height is in “HI” mode.
■When driving on slippery road surfaces
●Sudden braking, acceleration and steering may cause tire slippage and
reduce your ability to control the vehicle, resulting in an accident.
●Sudden changes in engine speed, such as engine braking caused by up- shifting or down-shifting, may cause the vehicle to skid, resulting in an accident.
●After driving through a puddle, lightly depress the brake pedal to make sure that the brakes are functioning properly. Wet brake pads may prevent the brakes from functioning properly. If the brakes on only one side are wet and not functioning properly, steering control may be affected, resulting in an accident.
■When shifting the shift lever
●Be careful not to shift the shift lever with the accelerator pedal depressed. This may lead to unexpected rapid acceleration of the vehicle that may cause an accident and result in death or serious injury.
152
2-1. Driving procedures
CAUTION
■When the vehicle is stopped
●Do not race the engine.
If the vehicle is in any gear other than P or N, the vehicle may accelerate suddenly and unexpectedly, and may cause an accident.
●Do not leave the vehicle with the engine running for a long time.
If such a situation cannot be avoided, park the vehicle in an open space and check that exhaust fumes do not enter the vehicle interior.
●In order to prevent accidents due to the vehicle rolling away, always keep depressing the brake pedal while the engine is running, and apply the parking brake as necessary.
●If the vehicle is stopped on an incline, in order to prevent accidents caused by the vehicle rolling forward or backward, always depress the brake pedal and securely apply the parking brake as needed.
●Avoid revving or racing the engine.
Running the engine at high speed while the vehicle is stopped may cause the exhaust system to overheat, which could result in a fire if combustible material is nearby.
■When the vehicle is parked
●Do not leave glasses, cigarette lighters, spray cans, or soft drink cans in
the vehicle when it is in the sun. Doing so may result in the following. • Gas may leak from a cigarette lighter or spray can, and may lead to a
fire.
• The temperature inside the vehicle may cause the plastic lenses and
plastic material of eye glasses to deform or crack.
• Soft drink cans may rupture, causing the contents to spray over the interior of the vehicle, and may also cause a short circuit in the vehi- cle’s electrical components.
●Always apply the parking brake, shift the shift lever to P, stop the engine
and lock the vehicle. Do not leave the vehicle unattended while the engine is running.
153
2-1. Driving procedures
CAUTION
■When the vehicle is parked
●If the shift lever is moved before the 4LO indicator turns on/off, the transfer mode may not be shifted completely. The transfer mode disengages both the front and rear driveshafts from the powertrain and allows the vehicle to move regardless of the shift position. (At this time, the indicator blinks and the buzzer sounds.) Therefore, the vehicle is free to roll even if the automatic transmission is in P. You or someone else could be seriously injured. You must complete the shifting of the transfer mode. (P. 239)
●Do not touch the exhaust pipe while the engine is running or immediately
after turning the engine off. Doing so may cause burns.
●Do not leave the engine running in an area with snow build-up, or where it is snowing. If snowbanks build up around the vehicle while the engine is running, exhaust gases may collect and enter the vehicle. This may lead to death or a serious health hazard.
■Exhaust gases
Exhaust gases include harmful carbon monoxide (CO) that is colorless and odorless. Inhaling exhaust gases may lead to death or a serious health haz- ard. ●If the vehicle is in a poorly ventilated area, stop the engine. In a closed area, such as a garage, exhaust gases may collect and enter the vehicle. This may lead to death or a serious health hazard.
●The exhaust should be checked occasionally. If there is a hole or crack caused by corrosion, damage to a joint or abnormal exhaust noise, be sure to have the vehicle inspected and repaired by your Toyota dealer. Failure to do so may allow exhaust gases to enter the vehicle, resulting in death or a serious health hazard.
154
2-1. Driving procedures
CAUTION
■When taking a nap in the vehicle
Always turn the engine off. Otherwise, you may accidentally move the shift lever or depress the accelerator pedal, which could cause an accident or fire due to engine overheating. Additionally, if the vehicle is parked in a poorly ventilated area, exhaust gases may collect and enter the vehicle, leading to death or a serious health hazard.
■When braking the vehicle
●When the brakes are wet, drive more cautiously.
Braking distance increases when the brakes are wet, and may cause one side of the vehicle to brake differently than the other side. Also the parking brake may not securely hold the vehicle.
●If the power brake assist function does not operate, do not follow other
vehicles closely and avoid downhills or sharp turns that require braking. In this case, braking is still possible, but it will require more force on the pedal than usual. Braking distance may also increase. Have your brakes fixed immediately.
●Do not pump the brake pedal if the engine stalls.
Each push on the brake pedal uses up the reserve for the power-assisted brakes.
●The brake system consists of 2 individual hydraulic systems: If one of the systems fails, the other will still operate. In this case, the brake pedal should be depressed more firmly than usual and braking distance becomes longer. Have your brakes fixed immediately.
155
2-1. Driving procedures
NOTICE
■When driving the vehicle
●Do not depress the accelerator and brake pedals at the same time during
driving, as this may restrain driving torque.
●Do not use the accelerator pedal or depress the accelerator and brake
pedals at the same time to hold the vehicle on a hill.
■When parking the vehicle
Always put the shift lever in P. Failure to do so may cause the vehicle to move or the vehicle may acceler- ate suddenly if the accelerator pedal is accidentally depressed.
■Avoiding damage to vehicle parts
●Do not turn the steering wheel fully in either direction and hold it there for a
long time. Doing so may damage the power steering pump.
●When driving over bumps in the road, drive as slowly as possible to avoid
damaging the wheels, underside of the vehicle, etc.
■If you hear a squealing or scraping noise while driving (brake pad wear
limit indicators) Have the brake pads checked and replaced by your Toyota dealer as soon as possible. The rotor damage can result if the pads are not replaced when needed. It is dangerous to drive the vehicle when the wear limits of the brake pads and/or that of the brake discs are exceeded.
■If you get a flat tire while driving
A flat or damaged tire may cause the following situations. Hold the steering wheel firmly and gradually press the brake pedal to slow down the vehicle. ●It may be difficult to control your vehicle. ●The vehicle will make abnormal sounds. ●The vehicle will behave abnormally. Replace a flat tire with a new one. (P. 486)
156
2
2-1. Driving procedures
NOTICE
■When encountering flooded roads
Do not drive on a road that has flooded after heavy rain etc. Doing so may cause the following serious damage to the vehicle. ●Engine stalling ●Short in electrical components ●Engine damage caused by water immersion In the event that you drive on a flooded road and the vehicle is flooded, be sure to have your Toyota dealer check the following. ●Brake function ●Changes in quantity and quality of oil and fluid used for the engine, trans-
mission, transfer (4WD models), differentials, etc.
●Lubricant condition for the propeller shaft, bearings and suspension joints
(where possible) and the function of all joints, bearings, etc.
157
2-1. Driving procedures Engine (ignition) switch
■ Engine switch
LOCK The steering wheel is locked and the key can be removed. (The key can be removed only when the shift lever is in P.) ACC Some electrical components such as the audio system can be used. ON All electrical components can be used. START For starting the engine.
■ Starting the engine
Check that the parking brake is set. Check that the shift lever is set in P. Sit in the driver’s seat and firmly depress the brake pedal. Turn the engine switch to the START position and start the engine. The engine will crank until it starts or for up to 25 seconds, which- ever is less. If you turn the engine switch, the engine will keep cranking for about 30 seconds maximum. Continue depressing the brake pedal until the engine is com- pletely started.
158
■Turning the key from ACC to LOCK
2-1. Driving procedures
Shift the shift lever to P. (P. 161) Push in the key and turn to the LOCK position.
■Steering lock release
When starting the engine, the engine switch may seem stuck in the LOCK posi- tion. To free it, turn the key while turning the steering wheel slightly in either direc- tion.
■If the engine does not start
The engine immobilizer system may not have been deactivated. (P. 105)
■Key reminder function
A buzzer sounds if the driver’s door is opened, while the engine switch is in the ACC or LOCK position to remind you to remove the key.
CAUTION
■When starting the engine
Always start the engine while sitting in the driver’s seat. Do not depress the accelerator while starting the engine under any circumstances. Doing so may cause an accident resulting in death or serious injury.
■Caution while driving
Do not turn the engine switch to the LOCK position. If in an emergency, you must turn the engine off while the vehicle is moving, turn the engine switch only to the ACC position.
159
2-1. Driving procedures
NOTICE
■To prevent battery discharge
Do not leave the engine switch in the ACC or ON position for long periods if the engine is not running. ■When starting the engine
●Do not crank for more than 30 seconds at a time. This may overheat the
starter and wiring systems. ●Do not race a cold engine. ●If the engine becomes difficult to start or stalls frequently, have the engine
checked immediately.
160
2-1. Driving procedures Automatic transmission
Select a shift position appropriate for the driving conditions. ■ Shifting the shift lever
While the engine switch is on, depress the brake pedal and
move the shift lever. ■ Shift position uses
Shift position
Function
Parking the vehicle or starting the engine
Reversing Neutral
Normal driving*1
S mode driving*2 (P. 162)
*1: To improve fuel consumption and reduce noises, set the shift lever in
D for normal driving.
*2: Selecting shift ranges S mode restricts the upper limit of the possible gear ranges, control engine braking forces, and prevents unneces- sary upshifting.
161
2-1. Driving procedures
Changing shift ranges in S mode
Shift the shift lever to the S position and operate the shift lever.
Upshifting Downshifting
The initial shift range in S mode is automatically set to 5 or 4 accord- ing to vehicle speed. However, the initial shift range may be set to 3
or 2 if the AI-SHIFT has operated while the shift lever was in the D position. (P. 163) ■ Shift ranges and their functionsShift range
Function
Automatically selecting gears between 1 and 6 according to vehicle speed and driving conditions. Automatically selecting gears between 1 and 5 according to vehicle speed and driving conditions. Automatically selecting gears between 1 and 4 according to vehicle speed and driving conditions. Automatically selecting gears between 1 and 3 according to vehicle speed and driving conditions. Automatically selecting gears between 1 and 2 according to vehicle speed and driving conditions. Setting the gear at 1.
A lower shift range will provide greater engine braking forces than a higher shift range.
162
2-1. Driving procedures
TOW/HAUL switch (with towing package)
Use TOW/HAUL mode when pulling a trailer or hauling a heavy load.
Press the TOW/HAUL switch. The indicator will come on.
Press the switch once more to cancel the mode.
■Gear range display when driving in S mode
The current gear range is displayed on the combination meter. (P. 162)
■When driving with the cruise control system
The engine brake will not operate in the S mode, even when downshifting to 5 or 4. (P. 202, 206)
■If the shift lever cannot be shifted from P
P. 499
■If the S indicator does not come on even after shifting the shift lever to
This may indicate a malfunction in the automatic transmission system. Have the vehicle inspected by your Toyota dealer, immediately. (In this situation, the vehicle will operate as if the shift lever is in D.)
■AI-SHIFT
The AI-SHIFT automatically shifts the gear to the suitable position according to the driver performance and driving conditions. The AI-SHIFT automatically operates when the shift lever is in the D posi- tion. (Shifting the shift lever to the S position cancels the function.)
163
2-1. Driving procedures
■Downshifting restrictions warning buzzer (in the S mode)
To help ensure safety and driving performance, downshifting operation may sometimes be restricted. In some circumstances, downshifting may not be possible even when the shift lever is operated. (The warning buzzer will sound twice.)
■Transmission protection function
If the tires spin continually when the vehicle becomes stuck in mud, dirt or snow, the automatic transmission temperature may become too high and cause damage. To avoid the damaging the automatic transmission, the system may tempo- rarily lock the gear in 1st. If the automatic transmission temperature falls, the gear locking is canceled and returns the automatic transmission to the normal operation.
164
2
2-1. Driving procedures Turn signal lever
Right turn Left turn Move and hold the lever partway to signal a lane change. The right hand signal will flash until you release the lever. Move and hold the lever partway to signal a lane change. The left hand signal will flash until you release the lever.
■Turn signals can be operated when
The engine switch is in the ON position.
■If the indicators flash faster than usual
Check that a light bulb in the front or rear turn signal lights has not burned out.
165
2-1. Driving procedures Parking brake
U.S.A.
Canada
the parking brake*. Set (Depressing the pedal again releases the parking brake.)
At this time, the indicator will come on. *: Fully depress
the parking brake pedal with your left foot while depressing the brake pedal with your right foot.
■Parking brake engaged warning buzzer
The buzzer sounds to indicate that parking brake is still engaged (with the vehicle having reached a speed of 3 mph [5 km/h]).
■Usage in winter time
See “Winter driving tips” for parking brake usage in winter time. (P. 266)
NOTICE
■Before driving
Fully release the parking brake. Driving the vehicle with the parking brake set will lead to brake components overheating, which may affect braking performance and increase brake wear.
166
2-1. Driving procedures Horn
To sound the horn, press on or close to the
mark.
■After adjusting the steering wheel (vehicles with manual tilt and tele-
scopic steering) Make sure that the steering wheel is securely locked. The horn may not sound if the steering wheel is not securely locked. (P. 79)
167
2-2. Instrument cluster Gauges and meters
Vehicles with multi-information display
The following gauges, meters and displays illuminate when the engine switch is in the ON position.
Tachometer Displays the engine speed in revolutions per minute. Speedometer Displays the vehicle speed. Fuel gauge Displays the quantity of fuel remaining in the tank. Voltmeter Displays the charge state. Engine oil pressure gauge Displays the engine oil pressure. Engine coolant temperature gauge Displays the engine coolant temperature. Odometer/trip meter switching and trip meter resetting button Switches between odometer and trip meter displays. Pushing and hold- ing the button will reset the trip meter when the trip meter is being dis- played.
168
2-2. Instrument cluster
Multi-information display P. 178
Automatic transmission fluid temperature gauge Displays the automatic transmission fluid temperature.169
2-2. Instrument cluster
Vehicles without multi-information display
The following gauges, meters and displays illuminate when the engine switch is in the ON position.
Tachometer Displays the engine speed in revolutions per minute. Speedometer Displays the vehicle speed. Fuel gauge Displays the quantity of fuel remaining in the tank. Voltmeter Displays the charge state. Engine oil pressure gauge Displays the engine oil pressure. Engine coolant temperature gauge Displays the engine coolant temperature. Odometer/trip meter switching and trip meter resetting button Switches between odometer and trip meter displays. Pushing and hold- ing the button will reset the trip meter when the trip meter is being dis- played.
170
2-2. Instrument cluster
Odometer/trip meter Odometer: Displays the total distance the vehicle has been driven. Trip meter: Displays the distance the vehicle has been driven since the meter was last reset. Trip meters A and B can be used to record and display differ- ent distances independently. Automatic transmission fluid temperature gauge (if equipped) Displays the automatic transmission fluid temperature.
Odometer and trip meter display button
Pressing this button switches between odometer and trip meter dis- plays.
Vehicles with multi-information display
Odometer Trip meter A* Trip meter B* *: Pushing and holding the button
will reset the trip meter.
Vehicles without multi-information display
Odometer Trip meter A* Trip meter B* *: Pushing and holding the button
will reset the trip meter.
171
2-2. Instrument cluster
Instrument panel light control
The brightness of the instrument panel lights can be adjusted.
Brighter Darker
Vehicles with multi-information display
With the dial turned fully up, the intensity of the instrument panel lights will not be reduced even when the tail lights/headlights are turned on.
NOTICE
■To prevent damage to the engine and its components
●Do not let the indicator needle of the tachometer enter the red zone, which
indicates the maximum engine speed.
●The engine may be overheating if the engine coolant temperature gauge is in the red zone (H). In this case, immediately stop the vehicle in a safe place, and check the engine after it has cooled completely. (P. 504)
■While driving
●When the voltmeter indicates more than 19 V or less than 9 V, the battery may be malfunctioning. Have your vehicle checked at your Toyota dealer. ●When the engine oil pressure gauge does not work properly, immediately
stop the engine and contact your Toyota dealer.
●When the automatic transmission fluid temperature gauge needle continu- ally points higher than normal, immediately contact your Toyota dealer. (if equipped)
172
2-2. Instrument cluster Indicators and warning lights
The indicator and warning lights on the instrument cluster and cen- ter panel inform the driver of the status of the vehicle’s various sys- tems.
Instrument cluster (vehicles with multi-information display)
Instrument cluster (vehicles without multi-information display)
173
2-2. Instrument cluster
Center panel
Outside rear view mirrors [vehicles with BSM (Blind Spot Moni- tor)]
174
2-2. Instrument cluster
■ Indicators
The indicators inform the driver of the operating state of the vehicle’s various systems.
Turn signal indicator (P. 165)
Headlight high beam indicator (P. 191) Security indicator
(P. 105, 107)
Shift position and shift range indicators (P. 161)
Cruise control indicator (P. 202, 206)
*1,4
Slip indicator (P. 245, 247)
*1 VSC OFF indicator (P. 244, 247, 249, 250)
*6
(If equipped)
BSM outside rear view mirror indicators (P. 227)
Headlight indicator (P. 187)
(U.S.A.)
(Canada) *1
(4WD models) *1
*1
*1
(4WD models)
(4WD models)
(If equipped)
Tail light indicator (P. 187)
AUTO LSD indicator (P. 244, 247)
Center differential lock indicator (P. 240)
TRAC OFF indicator (P. 247, 249, 250)
AIR BAG ON indicator (P. 124)
AIR BAG OFF indicator (P. 124)
4HI indicator (P. 239)
4LO indicator (P. 239)
TOW HAUL indicator (P. 163)
175
2-2. Instrument cluster
*1,2
*1,2
Height control HI indi- cator (P. 233)
Height control N indi- cator (P. 233)
*1,2
*1,2
Height control MAN. indicator (P. 234)
Height control LO indi- cator (P. 233)
■ Warning lights
Warning lights inform the driver of malfunctions in any of the vehicle’s systems. (P. 469)
*1
*1
*2
*1
*1
*1
*1
*1
*1
*1
*1
(U.S.A.)
(Canada)
(U.S.A.) *3
(Canada) *1,3
(U.S.A.)
(U.S.A.)
(Canada) *3
*1,5
*1: These lights turn on when the engine switch is turned to the ON position to indicate that a system check is being performed. They will turn off after the engine is started, or after a few seconds. There may be a malfunction in a system if a light does not come on, or if the lights do not turn off. Have the vehicle inspected by your Toyota dealer for details.
*2: Vehicles with multi-information display *3: Vehicles without multi-information display *4: The indicator flashes to indicate that the system is operating. *5: The indicator comes on to indicate a malfunction.
176
2
2-2. Instrument cluster
*6: In order to confirm operation, the BSM outside rear view mirror indi-
cators illuminate in the following situations: • When the engine switch is turned to the ON position while the
BSM main switch is set to ON.
• When the BSM main switch is set to ON while the engine switch is
in the ON position.
If the system is functioning correctly, the BSM outside rear view mirror indicators will turn off after a few seconds. If the BSM outside rear view mirror indicators do not illuminate or do not turn off, there may be a malfunction with the system. If this occurs, have the vehicle inspected by your Toyota dealer.
CAUTION
■If a safety system warning light does not come on
Should a safety system light such as ABS and the SRS airbag warning light not come on when you start the engine, this could mean that these systems are not available to help protect you in an accident, which could result in death or serious injury. Have the vehicle inspected by your Toyota dealer immediately if this occurs.
177
2-2. Instrument cluster Multi-information display
The multi-information display presents the driver with a variety of driving-related data.
● Trip information
(P. 178) Displays driving range, fuel consumption and other cruis- ing-related information.
● Warning messages
(P. 480) Automatically displayed when a malfunction occurs in one of the vehicle’s systems.
● Odometer and trip meter (P. 171)
display
Trip information
Display items can be switched by pushing the INFO button.
178
: If equipped
2-2. Instrument cluster
Zoom display of odometer and trip meters
Displays the odometer and one of the trip meters simultaneously.
Average Fuel Economy
Displays the average fuel consumption since the function was reset.
● The function can be reset by pushing the SELECT RESET button for more than 2 seconds when the Average Fuel Economy is displayed.
● Use the displayed average fuel consumption as a
reference.
Current Fuel Economy
Displays the current rate of fuel consumption.
Distance To Empty (driving range)
Displays the estimated maximum distance that can be driven with the quantity of fuel remaining. ● This distance is computed based on your average fuel consumption. As a result, the actual distance that can be driven may differ from that displayed.
● When only a small amount of fuel is added to the
tank, the display may not be updated.
179
2-2. Instrument cluster
Trip Timer
Average Speed
Displays the driving time.
To calculate the driving time, press the SELECT RESET button, and to stop the calculation, press it again. To reset the calculation, press the SELECT RESET button for more than 2 seconds.
Displays the average vehicle speed since the engine was started or the function was reset.
The function can be reset by pushing the SELECT RESET button for more than 2 seconds when the Average Speed is displayed.
180
2
2-2. Instrument cluster
Feature customization
The vehicle can be customized while the vehicle is stopped.
Press the SETUP button to select the item you want to cus- tomize unit. UNITS
KEYLESS ENTRY FEEDBACK
KEYLESS ENTRY RELOCK TIMER
KEYLESS ENTRY ALL DOORS UNLOCK
DOOR AUTO LOCKING
DOOR AUTO UNLOCKING
HEADLAMPS AUTO OFF TIMER
COURTESY LAMPS OFF TIMER
LANGUAGE
DEFAULT SETTING Press the SELECT RESET button to customize the items.
Items
Screen text
Select in this order
To select Unit A or Unit B (P. 186)
Door lock/ unlock warning function
Time for auto- matic door lock function
UNITS
Unit A
Unit B
KEYLESS ENTRY FEEDBACK
KEYLESS ENTRY RELOCK TIMER
LAMPS + TONE*
LAMPS
OFF
TONE
60 SECONDS*
120 SECONDS
30 SECONDS
OFF
181
2-2. Instrument cluster
Items
Screen text
Select in this order
Double switch operation to unlock all the doors
KEYLESS ENTRY ALL DOORS UNLOCK
Automatic door locking function
DOOR AUTO LOCKING
DOOR AUTO UNLOCKING
2 PRESSES*
1 PRESS
SHIFT OUT OF PARK
ABOVE 12 MPH* (20 km/h)
OFF
SHIFT TO PARK*
DRIVER DOOR OPEN
OFF
30 SECONDS*
60 SECONDS
HEADLAMPS AUTO OFF TIMER
0 SECONDS
90 SECONDS
Automatic door unlocking func- tion Time period before lights turn off (if a door is opened and closed, and engine switch is in ACC or LOCK) Time period before lights turn off
15 SECONDS*
30 SECONDS
8 SECONDS
ENGLISH*
FRENCH
SPANISH
COURTESY LAMPS OFF TIMER
Selecting the language
LANGUAGE
Reset to default setting *: Default setting
HOLD RESET TO RESTORE DEFAULT SETTINGS
After customize is complete, press the SETUP button to set the selected item. If the customization fails, the previously setting will be displayed. If no button is pressed for 10 seconds, the display change to normal display.
182
2-2. Instrument cluster
■To select the unit A (English/U.S. customary system) or unit B (metric
unit)
Press the SETUP button to display UNITS on the multi-information display. Press the SELECT RESET button to change the units. Press the INFO or SETUP button and complete the unit change.
Information
Average Fuel Economy and Current Fuel Economy Driving Range Average Speed Outside temperature display on the accessory meter
■Feature customization error
Unit A
MPG
MILES MPH
°F
Unit B
L/100 Km
Km Km/h
°C
• If SYSTEM ERROR message is indicated, turn the engine switch off and
• If SYSTEM ERROR message is indicated again, contact your Toyota
then on again.
dealer.
CAUTION
■Caution while driving
Do not adjust the display. Doing so may cause the driver to mishandle the vehicle and an accident, resulting in death or serious injury.
NOTICE
■The multi-information display at low temperatures
Allow the interior of the vehicle to warm up before using the liquid crystal information display. At extremely low temperatures, the information display monitor may respond slowly, and display changes may be delayed.
183
2-2. Instrument cluster Accessory meter
Outside temperature display Displays the outside air temperature. (P. 343) Outside temperature and trip information display (if equipped) Displays the outside temperature and trip information. (P. 171343) Clock (P. 342) H (Hour) button (P. 342) M (Minute) button (P. 342) INFO button (if equipped) SELECT RESET button (if equipped) SETUP button (if equipped)
184
2
2-2. Instrument cluster
Outside temperature and trip information display (if equipped)
Every time the INFO button is pushed, the display toggles through these information. ● OUTSIDE (outside temperature display)
Displays the outside air temperature.
● AVG (average fuel consumption after refueling)
Displays the average fuel consumption since the vehi- cle was last refueled.
• The function can be reset by pushing the SELECT RESET button for more than 2 sec- onds.
• Use the displayed average fuel consumption as a
reference.
● INST (current fuel consumption)
Displays the current rate of fuel consumption.
● RANGE (driving range)
Displays the estimated maximum distance that can be driven with the quantity of fuel remaining.
• This distance is computed based on your aver- age fuel consumption. As a result, the actual dis- tance that can be driven may differ from that displayed.
• When only a small amount of fuel is added to the
tank, the display may not be updated.
185
2-2. Instrument cluster
● Display off
■The accessory meter can be operated when The engine switch must be in the ON position.
■To select the unit A (English/U.S. customary system) or unit B (metric
unit) (vehicles without multi-information display) Press the SETUP button to change the units.
Information
Average fuel consumption and current fuel consumption Driving range Outside temperature
Unit A
MPG
MILES
°F
Unit B
L/100 Km
Km °C
CAUTION
■Caution while driving
Do not adjust the display. Doing so may cause the driver to mishandle the vehicle and cause an acci- dent, resulting in death or serious injury.
186
2
2-3. Operating the lights and wipers Headlight switch
The headlights can be operated manually or automatically.
Type A
U.S.A.
Canada
lights
lights
running
OFF Vehicles with day- time light system: The daytime running turn on. (P. 191) The side marker, parking, tail, license plate, daytime run- ning (if equipped) (P. 191) and instrument panel lights turn on. The headlights and all lights listed above (except daytime run- ning lights) turn on. The headlights, day- time running lights (if equipped) (P. 191) and all lights listed above turn on and off automatically. (When the engine switch is in the ON position)
187
2-3. Operating the lights and wipers
Type B
U.S.A.
Canada
188
lights
lights
running
OFF Vehicles with day- time light system: The daytime running turn on. (P. 191) The side marker, parking, tail, license plate, daytime run- ning (if equipped) (P. 191) and instrument panel lights turn on. The headlights and all lights listed above (except daytime run- ning lights) turn on. The headlights, day- time running lights (if equipped) (P. 191) and all lights listed above turn on and off automatically. (When the engine switch is in the ON position)
2
2-3. Operating the lights and wipers
Type C
running
The daytime running lights turn off. The headlights, side marker, parking, tail, license plate, day- time lights (P. 191) and instru- ments panel lights turn on and off auto- matically. (When the engine switch is in the ON position) The side marker, parking, tail, license plate, daytime run- ning lights (P. 191) and instrument panel lights turn on. The headlights and all lights listed above (except daytime run- ning lights) turn on.
189
running
The daytime running lights turn off. The headlights, side marker, parking, tail, license plate, day- time lights (P. 191) and instru- ments panel lights turn on and off auto- matically. (When the engine switch is in the ON position) The side marker, parking, tail, license plate, daytime run- ning lights (P. 191) and instrument panel lights turn on. The headlights and all lights listed above (except daytime run- ning lights) turn on.
2-3. Operating the lights and wipers
Type D
190
2
2-3. Operating the lights and wipers
Turning on the high beam headlights
With the headlights on, push the lever forward to turn on the high beams. Pull the lever back to the center position to turn the high beams off. Pull the lever toward you to turn on the high beams. Release the lever to turn them off. You can flash the high beams with the headlights on or off.
■Daytime running light system (if equipped)
●To make your vehicle more visible to other drivers during daytime driving, the daytime running lights turn on automatically whenever the engine is started and the parking brake is released with the headlight switch off or in the “AUTO” position. (Illuminate brighter than the parking light.) Day- time running lights are not designed for use at night. Type C and D: Daytime running lights can be turned off by operating the switch.
●Compared to turning on the headlights, the daytime running light system offers greater durability and consumes less electricity, so it can help improve fuel economy.
■Headlight control sensor
The sensor may not function properly if an object is placed on the sensor, or any- thing that blocks the sensor is affixed to the windshield. Doing so the sensor detecting the level of ambient light and may cause the automatic headlight sys- tem to malfunction.
interferes with
191
2-3. Operating the lights and wipers
■Automatic light off system
●When the headlights come on: The headlights and tail lights automati- cally turn off after 30 seconds when all doors are closed with the engine switch turned to the ACC or LOCK position. (The lights turn off immedi- ately if the button on the wireless remote control is pressed after all doors are locked.)
●When only the tail lights come on: The tail lights turn off automatically with the engine switch turned to the ACC or LOCK position and the driver’s door is opened.
To turn the lights on again, turn the engine switch to the ON position, or turn position. the headlight switch off once and then back to the
or
■Customization
●That can be configured at Toyota dealer. (vehicles without multi-informa-
tion display) Settings (automatic light off system) can be changed. (Customizable features P. 539)
●It is possible to change the settings. (vehicles with multi-information dis-
play) (Feature customization P. 181)
NOTICE
■To prevent battery discharge
Do not leave the lights on longer than necessary when the engine is not run- ning.
192
2-3. Operating the lights and wipers Fog light switch
The fog lights improve visibility in difficult driving conditions, such as in rain or fog. They can be turned on only when the headlights are on low beam.
Type A
OFF Front fog lights ON
: If equipped 193
2-3. Operating the lights and wipers
Type B
OFF Front fog lights ON
194
2
2-3. Operating the lights and wipers Windshield wipers and washer
Wiper intervals can be adjusted for intermittent operation (when
or Type A
is selected.)
Intermittent wind- shield wiper opera- tion Low speed wind- shield wiper opera- tion High speed wind- shield wiper opera- tion Temporary operation
the
Increases intermittent windshield wiper frequency Decreases the intermittent windshield wiper frequency
195
Washer/wiper dual opera- tion Wipers will automatically oper- ate a couple of times after the washer squirts.
Intermittent wind- shield wiper opera- tion Low speed wind- shield wiper opera- tion High speed wind- shield wiper opera- tion Temporary operation
2-3. Operating the lights and wipers
Type B
196
2
2-3. Operating the lights and wipers
the
intermittent Increases windshield wiper frequency Decreases the intermittent windshield wiper frequency
Washer/wiper dual opera- tion Wipers will automatically oper- ate a couple of times after the washer squirts.
■The windshield wiper and washer can be operated when
The engine switch must be in the ON position.
■If no windshield washer fluid sprays
Check that the washer nozzles are not blocked and if there is washer fluid in the windshield washer fluid reservoir.
197
2-3. Operating the lights and wipers
NOTICE
■When the windshield is dry
Do not use the wipers, as they may damage the windshield.
■When there is no washer fluid spray from the nozzle
Damage to the washer fluid pump may be caused if the lever is pulled toward you and held continually.
■When a nozzle becomes blocked
In this case, contact your Toyota dealer. Do not try to clear it with a pin or other object. The nozzle will be damaged.
198
2-3. Operating the lights and wipers Rear window wiper and washer
Type A
Intermittent window wiper operation Normal window wiper operation Washer/wiper operation Washer/wiper
