3-1. Using the air conditioning system and defogger
■ Pre-climate (Remote Climate Control)
By setting the schedule, the air conditioning system can be turned on before getting in the vehicle. (P. 53) Even if the schedule has not been set, for users who own a smart phone, the air conditioning system can be turned on and off when away from the vehicle. (P. 58)
■ Control panel
Passenger’s side temperature control
Windshield defogger
Automatic mode
HVAC display
Cooling and dehumidification function on/off
SYNC mode
Outside/recirculated air mode
Eco mode
Driver’s side temperature control
Fan speed control
Off
Air outlet selector
The operating section of the air conditioning panel uses capaci- tive touch sensors. (P. 290)
277
3-1. Using the air conditioning system and defogger
■ Display
AUTO mode display ECO mode display
Driver’s side temperature display
Driver’s side seat heater display
Air outlet display
Fan speed display
Cooling and dehumidification function display
Passenger’s side temperature display Passenger’s side seat heater display
Outside/recirculated air mode display
Rear window defogger display
Using the AUTO ECO mode or AUTO mode
AUTO ECO mode
Touch The air conditioning system begins to operate in AUTO ECO LO mode. Air outlets and fan speed are automatically adjusted according temperature setting.
the
to
In AUTO ECO mode, depending on the outside temperature and the set temperature, the seat heater operates, and the seat heater’s temperature is automati- cally adjusted. (P. 310) When in AUTO mode, air condi- tioning operation status is not shown.
278
3-1. Using the air conditioning system and defogger
AUTO mode
Touch The air conditioning system begins to operate. Air outlets and fan speed are automatically adjusted according to the tem- perature setting.
When in AUTO mode, air condi- tioning operation status is not shown.
■ Confirming AUTO mode operation status
When in AUTO mode, the operation status of fan speed, air outlet mode, outside/recirculated air mode and whether the A/C is on or off can be confirmed on the display by touching The display will return to its previous state after a few seconds.
■ Changing AUTO mode
Each time
is touched, AUTO mode changes.
279
3-1. Using the air conditioning system and defogger
Using the Manual ECO mode or Manual mode
If the following operations are performed while in AUTO ECO mode, the air conditioning system will change to Manual ECO mode. The system will also change to Manual mode if operations are performed when the system is off or in AUTO normal mode.
STEP 1
To adjust the fan speed, touch
on
to increase the fan
speed and fan speed.
to decrease the
To turn the fan off, press
STEP 2
To change the air outlets, press
The air outlets used are switched each time the button is pressed. (P. 283)
280
3-1. Using the air conditioning system and defogger
Changing the set temperature
Driver’s side setting
Touch
on
to increase
the temperature and decrease the temperature.
to
Passenger’s side setting
Touch
on
to increase
the temperature and decrease the temperature.
to
281
3-1. Using the air conditioning system and defogger
■ Passenger’s side setting using “SYNC” mode
When “SYNC” mode is turned on, the passenger’s side tempera- ture will be linked to the driver's side temperature setting.
Touch
If “SYNC” mode is on, “SYNC” is shown on the passenger's side temperature display. touched, Each “SYNC” mode changes between on/off.
time
is
Defogging the windshield
Press
and
function speed
The dehumidification operates fan increases. Set the outside/recirculated air mode switch to outside air mode if the recirculated air mode is used. (It may switch automati- cally.) To defog the windshield and the side windows early, turn the air flow and temperature up. To return to the previous mode,
press windshield is defogged.
again when the
282
3-1. Using the air conditioning system and defogger
Air outlets and air flow
AUTO mode: The air outlets switch automatically according to condi- tions. The air flow mode can be confirmed by touching
Manual mode: The air outlets
switch each pressed.
time
is
Air flows to the upper body.
283
3-1. Using the air conditioning system and defogger
Air flows to the upper body and feet.
Air flows mainly to the feet.
Air flows to the feet and the windshield defogger operates.
284
3-1. Using the air conditioning system and defogger
Adjusting the position of the air outlets
Center outlets
Direct air flow to the left or right, up or down.
Right and left side outlets
Direct air flow to the left or right, up or down.
Opening and closing the side outlets
Open the vent. Close the vent.
285
3-1. Using the air conditioning system and defogger
Switching between outside air and recirculated air modes
Touch The mode switches between side air mode) each time display, changing from
to
■Using automatic mode
(recirculated air mode) and
(out- is shown on the
is touched. (When is not possible.)
Fan speed is adjusted automatically according to the temperature setting and the ambient conditions. Therefore, the fan may stop for a while until warm or cool air is ready to flow after
or
is pressed. ■Fogging up of the windows
●The windows will easily fog up when the humidity in the vehicle is high. on will dehumidify the air from the outlets and defog the
Turning windshield effectively.
off, the windows may fog up more easily.
●If you turn ●The windows may fog up if the ●When the outside air temperature is low, it may take a while for the con-
(recirculated air mode) is used.
densation to clear from the windshield.
■Windshield fog detection function
When automatic mode is set, the humidity sensor (P. 291) detects fog on the windshield and controls the air conditioning system to prevent fog.
286
3-1. Using the air conditioning system and defogger
■Outside/recirculated air mode
●When driving on dusty roads such as tunnels or in heavy traffic, set the outside/recirculated air mode button to the recirculated air mode. This is effective in preventing outside air from entering the vehicle interior. Dur- ing cooling operation, setting the recirculated air mode will also cool the vehicle interior effectively.
●Outside/recirculated air mode may automatically switch depending on the temperature setting, the inside temperature, the outside temperature and humidity. Also, outside air mode may be automatically switched to when the out- side temperature is low.
■When the outside temperature exceeds 75F (24C) and the air condi-
tioning system is on ●In order to reduce the air conditioning power consumption, the air condi- tioning system may switch to recirculated air mode automatically. This may also reduce traction battery power consumption.
●Recirculated air mode is selected as a default mode when the “POWER”
switch is turned to ON mode.
●It is possible to switch to outside air mode at any time by touching
■Air conditioning odors
●During use, various odors from inside and outside the vehicle may enter into and accumulate in the air conditioning system. This may then cause odor to be emitted from the vents.
●To reduce potential odors from occurring:
• It is recommended that the air conditioning system be set to outside air
mode prior to turning the vehicle off.
• The start timing of the blower may be delayed for a short period of time
after the air conditioning system is started in AUTO mode.
■Air conditioning filter
P. 381
287
3-1. Using the air conditioning system and defogger
■Operation of the air conditioning system in AUTO ECO mode
In the AUTO ECO mode, the air conditioning system is controlled as follows to prioritize driving range: ●Compressor operation controlled to restrict heating/cooling capacity ●Fan speed restricted when automatic mode is selected
More importance on comfort
More importance on driving range
the operating mode closer
When it is desirable to set the cabin tem- perature to a more comfortable one, move to “NORMAL” by pressing ECO. When it is desirable to increase driving range, move the selected mode closer to “OFF” by pressing ECO.
■The seat heater when using ECO LO or ECO HI mode
Depending on the outside temperature and the set temperature, the seat heater is automatically operated and its temperature adjusted. The seat heater can be adjusted to a desired temperature using the seat heater con- trol. (P. 310)
288
3-1. Using the air conditioning system and defogger
■If the amount of charge remaining in the traction battery becomes low Depending on the battery’s condition, the air conditioning system’s usage may be restricted or stopped (excluding the windshield defogger). If the air conditioning is restricted or turned off, one of the following messages will be shown on the HVAC display.
Warning message
Details
(Shown for a few seconds)
(Shown continually)
(Shown for a few seconds)
Climate Control Power possibly limited. • The traction battery output is low.
Any climate control setting can be selected. Climate Control Power stopped. • The traction battery level is very low. • The traction battery output is very low.
Only the windshield defogger and rear window defogger can be selected. Climate Control Power possibly limited. • The traction battery temperature is high.
Some climate control setting can- not be selected.
289
3-1. Using the air conditioning system and defogger
■Handling of the air conditioning panel
The operating section of the air conditioning panel uses capacitive touch sensors. In the following cases, incorrect operation or non-response may occur. ●If the operating section is dirty or has liquid attached to it, incorrect oper-
ation or non-response may occur.
●If the operating section receives electromagnetic waves, incorrect opera-
tion or non-response may occur.
●If wearing gloves during operation, non-response may occur. ●If fingernails are used to operate the system, non-response may occur. ●If a touch pen is used to operate the system, non-response may occur. ●If the palm of your hand touches the operating section during operation,
incorrect operation may occur.
●If the palm of your hand touches the operating section, incorrect opera-
tion may occur.
●If operations are performed quickly, non-response may occur.
■Pre-climate operations
The pre-climate is automatically controlled by the set temperature at the time the “POWER” switch is turned off.
■Pre-climate operations automatic shut-off
P. 82
■While pre-climate is operating
P. 82
CAUTION
■To prevent the windshield from fogging up
during cool air operation in extremely humid weather. Do not use The difference between the temperature of the outside air and that of the windshield can cause the outer surface of the windshield to fog up, blocking your vision.
290
3-1. Using the air conditioning system and defogger
NOTICE
■To prevent 12-volt battery discharge
Do not leave the air conditioning system on longer than necessary when the “POWER” switch is in ON mode.
■Humidity sensor
In order to detect fog on the windshield, a sensor which monitors the temperature of the windshield, the surrounding humidity, etc. is installed. (P. 286) Follow these points to avoid damaging the sensor: ●Do not disassemble the sensor ●Do not spray glass cleaner on the sen-
sor or subject it to strong impacts
●Do not stick anything on the sensor
291
3-1. Using the air conditioning system and defogger Rear window and outside rear view mirror defoggers
The rear window defogger is used to defog the rear window. The out- side rear view mirror defoggers are used to remove frost, dew or raindrops from the outside rear view mirrors.
On/off
The defoggers will automati- cally turn off after approxi- mately 15 minutes.
■The defogger can be operated when
The “POWER” switch is in ON mode. ■Outside rear view mirror defoggers
Turning the rear window defogger on will turn the outside rear view mirror defoggers on.
CAUTION
■Outside rear view mirror defoggers
The surfaces of the outside rear view mirrors become hot. Do not touch them to prevent from burning yourself.
292
3-2. Using the interior lights Interior lights list
Interior light (P. 295) Personal/interior lights (P. 294) Shift lever light (when the “POWER” switch is in ON mode) “POWER” switch light Footwell lights (turns on/off according to whether the door is opened/closed) Luggage compartment light (turns on/off according to whether the back door is opened/closed)
293
3-2. Using the interior lights
Personal/interior light main switch and personal/interior lights
Personal/interior light main switch
Door position The personal lights and interior light come on when a door is opened. They go off when the doors are closed. Off The personal lights and interior light can be individually turned on or off.
Personal/interior lights
On/off
294
Interior light
3-2. Using the interior lights
Interior light and luggage compartment light
Door position Off On
Luggage compartment light
On Off
■Illuminated entry system
The lights automatically turn on/off according to “POWER” switch mode, the presence of the electronic key, whether the doors are locked/unlocked, and whether the doors are open/closed.
■To prevent 12-volt battery discharge (excluding luggage compartment
light) If the lights remain on when a door is not fully closed and the personal/inte- rior light main switch is in door position, the lights will go off automatically after 20 minutes.
■Customization that can be configured at Toyota dealer
Settings (e.g. the time elapsed before lights turn off) can be changed. (Customizable features P. 500)
295
3-3. Using the storage features List of storage features
Bottle holders Auxiliary boxes Glove box Cup holders Console box
CAUTION
■Items that should not be left in the storage spaces
Do not leave glasses, lighters or spray cans in the storage spaces, as this may cause the following when cabin temperature becomes high: ●Glasses may be deformed by heat or cracked if they come into contact
with other stored items.
●Lighters or spray cans may explode. If they come into contact with other stored items, the lighter may catch fire or the spray can may release gas, causing a fire hazard.
296
3-3. Using the storage features
Glove box
Glove box
The glove box can be opened by pulling the lever and locked and unlocked using the mechanical key.
Unlock Lock Open
CAUTION
■Caution while driving
Keep the glove box closed. In the event of sudden braking or sudden swerv- ing, an accident may occur due to an occupant being struck by the open glove box or the items stored inside.
297
3-3. Using the storage features
Console box
Upper tray
Lift the lid.
Console box
Lower box
Pull the lever up and lift the lid.
CAUTION
■Caution while driving
Keep the console box closed. In the event of sudden braking, an accident may occur due to an occupant being struck by the open console box or the items stored inside.
298
Cup holders
Type A
Type B
3-3. Using the storage features
Cup holders
To use the cup holders, pull the strap forward and fold down the center seatback.
■Adjusting size of the cup holders (type A only)
Remove the adapters.
299
3-3. Using the storage features
Cup holders and bottle holders
CAUTION
■Items unsuitable for the cup holder
Do not place anything other than cups or beverage cans in the cup holders. Other items may be thrown out of the holders in the event of an accident or sudden braking, causing injury. If possible, cover hot drinks to prevent burns.
Bottle holders
Front seat
Rear seat
300
3-3. Using the storage features
Bottle holders
CAUTION
■Items unsuitable for the bottle holder
Do not place anything other than a bottle in the bottle holders. Other items may be thrown out of the holders in the event of an accident or sudden braking and cause injury.
NOTICE
■Items that should not be stowed in the bottle holders
Put the cap on before stowing a bottle. Do not place open bottles in the bot- tle holders, or glasses and paper cups containing liquid. The contents may spill and glasses may break.
301
3-3. Using the storage features
Auxiliary boxes
Type A
Auxiliary boxes
To open and close the auxiliary box, press the button.
Type B
Press the lid.
CAUTION
■Caution while driving
Keep the auxiliary boxes closed. In the event of sudden braking, an accident may occur due to an occupant being struck by an open auxiliary box or the items stored inside.
■Items unsuitable for storing (type B)
Do not store items heavier than 0.4 lb. (0.2 kg). Doing so may cause the overhead console to open and the items inside may fall out, resulting in an accident.
302
3-3. Using the storage features
Auxiliary boxes
NOTICE
■Operating the auxiliary box
If it is difficult to open or close the auxiliary box on a steep hill, move the vehicle to a level place. To avoid damage to the auxiliary box, do not apply excessive force to operate it.
303
3-4. Other interior features Sun visors
Forward position: Flip down. Side position: Flip down, unhook, and swing to the side. Side extender: Place in side position then slide backwards.
304
3-4. Other interior features Vanity mirrors
Slide the cover to open.
The light turns on when the cover is opened.
NOTICE
■To prevent 12-volt battery discharge
Do not leave the vanity lights on for extended periods while the EV system is off.
305
3-4. Other interior features Power outlets
The power outlet can be used for 12 V accessories that run on less than 10 A. Type A
Type B
Type C
306
3-4. Other interior features
■The power outlet can be used when
The “POWER” switch is in ACCESSORY or ON mode.
CAUTION
■Using a power outlet
Observe the following precautions to reduce the risk of injury. ●Use of the power outlet when it is wet with water or snow may result in electrical shocks and is extremely dangerous. The power outlet must be thoroughly dried before use.
●Do not allow children to use or play with the power outlet. ●Be careful not to get any part of your body caught in the power outlet lid. ●When using electrical appliances, strictly follow any cautions and notices
written on their labels and in the manufacturers' instruction manuals.
●Do not modify, disassemble or repair the power outlet in any way. Doing so may result in unexpected malfunctions or accidents, which could cause serious damage or injuries. Contact your Toyota dealer for any necessary repairs.
■To prevent injuries and accidents, securely fix all electric appliances before use and do not use any appliances that may do any of the fol- lowing: ●Distract the driver while driving, or hamper safe driving. ●Result in a fire or burn injuries due to the appliance rolling, falling or over-
heating while driving.
●Emit steam while the windows of the cabin are closed.
307
3-4. Other interior features
CAUTION
■To prevent unexpected accidents, such as electric shocks, do not per-
form any of the following: ●Using the power outlet for electric heaters while sleeping. ●Contaminating the power outlet with liquid substances or mud. ●Handling electrical appliance plugs at the power outlet with wet hands or
feet.
●Inserting foreign objects into the power outlet. ●Using malfunctioning electric appliances. ●Inserting inappropriate or badly fitting plugs into the power outlet.
NOTICE
■To avoid damaging the power outlet and the plug
●Close the power outlet lid when not in use. ●Do not allow foreign objects or liquids to enter the power outlet, as this
may cause a short circuit.
●Do not use plug adaptors to connect too many plugs to the power outlet. ●After removing a plug, gently close the power outlet lid.
■To prevent blown fuse
Do not use an accessory that uses more than 12 V 10 A.
■To prevent 12-volt battery discharge
Do not use the power outlet longer than necessary when the EV system is off.
308
3-4. Other interior features
NOTICE
■To prevent any damage caused by heat
●Do not use any electrical appliances that give off intense heat, such as
toasters.
●Do not use any electrical appliances that are easily affected by vibration or heat inside the vehicle. Vibration while driving, or the heat of the sun while parking, may result in damage to those electrical appliances.
■If any electrical appliances are to be used while driving
Securely fasten both the appliances and their cables to prevent them from falling or getting caught in any of the power train components.
■If the power outlet is loose when an electrical appliance plug is con-
nected Replace the outlet. Contact your Toyota dealer for any necessary replace- ments.
■If the power outlet gets dirty
Use a soft, clean cloth to wipe it gently. Do not use any cleansing materials, such as organic solvents, wax, or compound cleaners, as these may dam- age the power outlet or cause it to malfunction.
309
3-4. Other interior features Seat heaters
Display Seat heater control (driver’s seat) Seat heater control (front passenger seat)
■ Linked to air conditioning operations
When the air conditioning is set to ECO LO or ECO HI mode, the seat heater is auto- matically operated and its tem- perature automatically adjusted according to the out- side temperature and air con- ditioning settings.
“ECO” is shown on the display.
310
3-4. Other interior features
■ Manual Mode
Each time the seat heater control is touched, the seat heater's operation or temperature setting changes.
Seat heater off High Medium Low
■The seat heaters can be used when The “POWER” switch is in ON mode.
■When not in use
Turn the seat heater off.
■Front passenger seat heater
●When the air-conditioning is in ECO LO or ECO HI mode, the seat heater automatically turns on/off depending on whether the front passenger seat is occupied or not.
●When the seat heater is operating in manual mode, it does not automati- cally turn on/off depending on whether the front passenger seat is occu- pied or not.
●In order to prevent unintended seat heater operation, do not place lug-
gage on the passenger seat. The sensor may mistakenly judge the seat to be occupied and turn the seat heater on.
311
3-4. Other interior features
CAUTION
■Burns
●Use caution when seating the following persons in a seat with the seat
heater on to avoid the possibility of burns: • Babies, small children, the elderly, the sick and the physically chal-
lenged
• Persons with sensitive skin • Persons who are fatigued • Persons who have taken alcohol or drugs that induce sleep (sleeping
drugs, cold remedies, etc.)
●Do not cover the seat with anything when using the seat heater.
Using the seat heater with a blanket or cushion increases the temperature of the seat and may lead to overheating.
●Do not use the seat heater more than necessary. Doing so may cause
minor burns or overheating.
NOTICE
■To prevent seat heater damage
Do not put heavy objects that have an uneven surface on the seat and do not stick sharp objects (needles, nails, etc.) into the seat.
■To prevent 12-volt battery discharge
Turn the seat heaters off when the EV system is off.
312
3-4. Other interior features Armrest
To use the armrest, pull the strap forward and fold down the center seatback.
To return the rear center seat- back to its original position, lift it up until it locks.
NOTICE
■To prevent damage to the armrest
Do not place too much strain on the armrest.
313
3-4. Other interior features Coat hooks
CAUTION
■Items that must not be hung on the hook
Do not hang a coat hanger or other hard or sharp objects on the hook. If the SRS curtain shield airbags deploy, these items may become projectiles, causing death or serious injury.
NOTICE
■To prevent damage to the coat hook
Do not place too much load on the coat hook.
314
3-4. Other interior features Assist grips
An assist grip installed on the ceiling can be used to support your body while sitting on the seat.
CAUTION
■Assist grip
Do not use the assist grip when getting in or out of the vehicle or rising from your seat.
NOTICE
■To prevent damage to the assist grip
Do not hang any heavy object or put a heavy load on the assist grip.
315
3-4. Other interior features Floor mat
Use only floor mats designed specifically for vehicles of the same model and model year as your vehicle. Fix them securely in place onto the carpet.
Fix the floor mat in place using the retaining hooks (clips) pro- vided.
The shape of the retaining hooks (clips) and the fixing procedure of the floor mat for your vehicle may differ from those shown in the illustration. For details, refer to the floor mat retention clip installation instructions supplied with the clips.
CAUTION
Observe the following precautions. Failure to do so may cause the driver's floor mat to slip, possibly interfering with the pedals while driving. An unexpectedly high speed may result or it may become difficult to stop the vehicle, leading to a serious accident. ■When installing the driver's floor mat
●Do not use floor mats designed for other models or different model year
vehicles, even if they are Toyota Genuine floor mats.
●Only use floor mats designed for the driver's seat. ●Always install the floor mat securely using the retaining hooks (clips) pro-
vided.
●Do not use two or more floor mats on top of each other. ●Do not place the floor mat bottom-side up or upside-down.
■Before driving
●Check that the floor mat is securely fixed in the correct place with all the provided retaining hooks (clips). Be especially careful to perform this check after cleaning the floor.
●With the EV system stopped and the shift position in P, fully depress each pedal to the floor to make sure it does not interfere with the floor mat.
316
3-4. Other interior features Luggage compartment features
■ Cargo hooks
Pull the hook down to use it.
The cargo hooks are provided for securing loose items.
■ Grocery bag hooks
■ Storage box Type A The rear deck board can be folded up into two positions.
STEP 1
Lift the rear deck board.
317
3-4. Other interior features
STEP 2
Type B
Fold up the deck board.
The deck board can be removed.
Lift the front deck board.
318
3-4. Other interior features
CAUTION
■When the cargo hooks are not in use
To avoid injury, always return the cargo hooks to their stowed positions.
■Caution while driving
Do not drive with any of the deck boards opened. Items may fall out and cause injury.
NOTICE
■To prevent damage to the grocery bag hooks
Do not hang heavy loads on the hooks.
■Space unsuitable for storing items
ECU
Do not put items in the space behind the cover on the left side of the luggage com- partment. The items may collide with the ECU while driving, damaging the unit.
319
3-4. Other interior features Garage door opener
The garage door opener can be programmed to operate garage doors, gates, entry doors, door locks, home lighting systems, secu- rity systems, and other devices.
The garage door opener (HomeLink Universal Transceiver) is manufac- tured under license from HomeLink.
Programming HomeLink®
The HomeLink compatible transceiver in your vehicle has 3 buttons which can be programmed to operate 3 different devices. Refer to the programming method below appropriate for the device.
Buttons Indicator
320
■ Programming HomeLink®
STEP 1
STEP 2
3-4. Other interior features
Point the remote control trans-
mitter for the device 1 to 3 in. (25
to 75 mm) from the HomeLink
buttons.
Keep the HomeLink indicator light in view while programming.
the Press and hold one of HomeLink buttons and the the transmitter button. When HomeLink light changes from a slow to a rapid flash, you can release both but- tons.
indicator
If the HomeLink indicator light comes on but does not flash, or flashes rapidly for 2 seconds and remains lit, the HomeLink button is already programmed. Use the other buttons or the “Reprogramming a HomeLink button” instructions. (P. 324)
follow
321
3-4. Other interior features
STEP 3
Test the HomeLink operation by pressing the newly pro- grammed button.
If a HomeLink button has been programmed for a garage door, check to see if the garage door opens and closes. If the garage door does not operate, see if your remote control transmitter is of the rolling code type. Press and hold the programmed HomeLink button. The remote control trans- mitter is of the rolling code type if the HomeLink light flashes rapidly for 2 seconds and then remains lit. If your transmit- ter is of the rolling code type, pro- ceed heading “Programming a rolling code sys- tem”.
indicator
the
to
STEP 4
Repeat the steps above to program another device for any of the remaining HomeLink buttons. ■ Programming a Rolling Code system
If your device is Rolling Code equipped, follow the steps under the heading “Programming HomeLink” before proceeding with the steps listed below.
STEP 1
STEP 2
Locate the training button on the ceiling mounted garage door
opener motor. The exact location and color of the button may
vary by brand of garage door opener motor.
Refer to the operation manual supplied with the garage door opener
motor for the location of the training button.
Press the training button.
Following this step, you have 30 seconds in which to initiate step 3
below.
322
3-4. Other interior features
STEP 3
STEP 4
Press and hold the vehicle's programmed HomeLink button for 3 seconds and then release it. Repeat this step once again. The garage door may open. If the garage door opens, the programming process is complete. If the door does not open, press and release the button a third time. This third press and release will complete the programming process by opening the garage door. The ceiling mounted garage door opener motor should now recog- nize the HomeLink signal and operate the garage door. Repeat the steps above to program another rolling code sys- tem for any of the remaining HomeLink buttons.
■ Programming an entry gate
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
Place the remote control transmitter 1 to 3 in. (25 to 75 mm) away from the HomeLink buttons. Keep the HomeLink indicator light in view while programming. Press and hold the selected HomeLink button. Repeatedly press and release (cycle) the remote control transmitter for 2 seconds each until step 4 is completed. When the HomeLink indicator light starts to flash rapidly, release the buttons. Test the HomeLink operation by pressing the newly pro- grammed button. Check to see if the gate/device operates correctly. Repeat the steps above to program another device for any of the remaining HomeLink buttons.
■ Programming other devices
To program other devices such as home security systems, home door locks and lighting, contact your Toyota dealer for assistance.
■ Reprogramming a button
The individual HomeLink buttons cannot be erased but can be reprogrammed. To reprogram a button, follow the “Reprogramming a HomeLink button” instructions.
323
3-4. Other interior features
Operating HomeLink®
Press the appropriate HomeLink button. The HomeLink indicator light should come on.
The HomeLink compatible transceiver in your vehicle continues to send a signal for up to 20 seconds as long as the button is pressed.
Reprogramming a HomeLink® button
Press and hold the desired HomeLink button. After 20 seconds, the HomeLink indicator light will start flashing slowly. Keep pressing the HomeLink button and press and hold the transmitter button until the HomeLink indicator light changes from a slow to a rapid flash. Release the buttons.
Erasing the entire HomeLink® memory (all three programs)
Press and hold the 2 outside but- tons for 10 seconds until the indi- cator light flashes.
If you sell your vehicle, be sure to erase the programs stored in the HomeLink memory.
324
3-4. Other interior features
■Before programming
●Install a new battery in the remote control transmitter. ●The battery side of the remote control transmitter must be pointed away
from the HomeLinkbutton.
■Certification for the garage door opener
FCC ID:NZLOBIHL4
NOTE:
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC WARNING:
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
■When support is necessary
Visit on the web at www.homelink.com or call 1-800-355-3515.
CAUTION
■When programming a garage door or other remote control devices
The garage door or other devices may operate, so ensure people and objects are out of danger to prevent potential harm.
■Conforming to federal safety standards
Do not use the HomeLink compatible transceiver with any garage door opener or device that lacks safety stop and reverse features as required by federal safety standards. This includes any garage door that cannot detect an interfering object. A door or device without these features increases the risk of death or serious injury.
325
3-4. Other interior features Safety Connect
Safety Connect is a subscription-based telematics service that uses Global Positioning System (GPS) data and embedded cellular tech- nology to provide safety and security features to subscribers. Safety Connect is supported by Toyota’s designated response center, which operates 24 hours per day, 7 days per week. Safety Connect service is available by subscription on select, telematics hardware-equipped vehicles. By using the Safety Connect service, you are agreeing to be bound by the Telematics Subscription Service Agreement and its Terms and Conditions, as in effect and amended from time to time, a current copy of which is available at Toyota.com. All use of the Safety Con- nect service is subject to such then-applicable Terms and Condi- tions. ■ System components
Microphone “SOS” button LED light indicators
326
3-4. Other interior features
■ Services
Subscribers have the following Safety Connect services avail- able: ● Automatic Collision Notification*
Helps drivers receive necessary response from emergency
service providers. (P. 329)
*: U.S. Patent No. 7,508,298 B2
● Stolen Vehicle Location
Helps drivers in the event of vehicle theft. (P. 330)
● Emergency Assistance Button (SOS)
Connects drivers to response-center support. (P. 330)
● Enhanced Roadside Assistance
Provides drivers various on-road assistance. (P. 330)
■ Subscription
After you have signed the Telematics Subscription Service Agreement and are enrolled, you can begin receiving services. A variety of subscription terms is available for purchase. Contact your Toyota dealer, call 1-800-331-4331, or push the “SOS” but- ton in your vehicle for further subscription details.
327
3-4. Other interior features
■Safety Connect Services Information
●Phone calls using the vehicles Bluetooth® technology will not be possible
during Safety Connect.
●Safety Connect is available beginning Fall 2009 on select Toyota models. Contact with the Safety Connect response center is dependent upon the telematics device being in operative condition, cellular connection avail- ability, and GPS satellite signal reception, which can limit the ability to reach the response center or receive emergency service support. Enroll- ment and Telematics Subscription Service Agreement required. A variety of subscription terms is available; charges vary by subscription term selected.
●Automatic Collision Notification, Emergency Assistance, Stolen Vehicle Location, and Enhanced Roadside Assistance will function in the United States, including Hawaii and Alaska, and in Canada. No Safety Connect services will function outside of the United States in countries other than Canada.
●Safety Connect services are not subject to section 255 of the Telecom-
munications Act and the device is not TTY compatible.
■Languages
The Safety Connect response center will offer support in multiple languages. The Safety Connect system will offer voice prompts in English and Spanish. Please indicate your language of choice when enrolling.
■When contacting the response center
You may be unable to contact the response center if the network is busy.
328
3-4. Other interior features
Safety Connect LED light Indicators
When the “POWER” switch is turned to ON mode, the red indicator light comes on for 2 seconds then turns off. Afterward, the green indi- cator light comes on, indicating that the service is active. The following indicator light patterns indicate specific system usage conditions: ● Green indicator light on = Active service ● Green indicator light flashing = Safety Connect call in process ● Red indicator light (except at vehicle start-up) = System malfunc-
tion (contact your Toyota dealer)
● No indicator light (off) = Safety Connect service not active
Safety Connect services
■ Automatic Collision Notification
In case of either airbag deployment or severe rear-end collision, the system is designed to automatically call the response center. The responding agent receives the vehicle’s location and attempts to speak with the vehicle occupants to assess the level of emer- gency. If the occupants are unable to communicate, the agent automatically treats the call as an emergency, contacts the nearest emergency services provider to describe the situation, and requests that assistance be sent to the location.
329
3-4. Other interior features
■ Stolen Vehicle Location
If your vehicle is stolen, Safety Connect can work with local author- ities to assist them in locating and recovering the vehicle. After fil- ing a police report, call the Safety Connect response center at 1- 800-331-4331 and follow the prompts for Safety Connect to initiate this service. In addition to assisting law enforcement with recovery of a stolen vehicle, Safety-Connect-equipped vehicle location data may, under certain circumstances, be shared with third parties to locate your vehicle. Further information is available at Toyota.com.
■ Emergency Assistance Button (“SOS”)
In the event of an emergency on the road, push the “SOS” button to reach the Safety Connect response center. The answering agent will determine your vehicle’s location, assess the emer- gency, and dispatch the necessary assistance required. If you accidentally press the “SOS” button, tell the response-center agent that you are not experiencing an emergency.
■ Enhanced Roadside Assistance
Enhanced Roadside Assistance adds GPS data to the already included warranty-based Toyota roadside service. Subscribers can press the “SOS” button to reach a Safety Connect response-center agent, who can help with a wide range of needs, such as: towing, flat tire, etc. For a description of the Enhanced Roadside Assistance services and their limitations, please see the Safety Connect Terms and Conditions, which are available at Toyota.com.
330
3-4. Other interior features
Safety information for Safety Connect
Important! Read this information before using Safety Connect. ■ Exposure to radio frequency signals
The Safety Connect system installed in your vehicle is a low-power radio transmitter and receiver. It receives and also sends out radio frequency (RF) signals. In August 1996, the Federal Communications Commission (FCC) adopted RF exposure guidelines with safety levels for mobile wire- less phones. Those guidelines are consistent with the safety stan- dards previously set by the following U.S. and international standards bodies. ● ANSI (American National Standards Institute) C95.1 [1992] ● NCRP (National Council on Radiation Protection and Measure-
ment) Report 86 [1986]
● ICNIRP (International Commission on Non-Ionizing Radiation
Protection) [1996]
Those standards were based on comprehensive and periodic eval- uations of the relevant scientific literature. Over 120 scientists, engineers, and physicians from universities, and government health agencies and industries reviewed the available body of research to develop the ANSI Standard (C95.1). The design of Safety Connect complies with the FCC guidelines in addition to those standards.
331
3-4. Other interior features
■Certification for Safety Connect
FCC ID: O9EGTM1
NOTE:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful interfer-
ence, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC WARNING:
Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
332
Maintenance and care
4-1. Maintenance and care
Cleaning and protecting
the vehicle exterior......... 334
Cleaning and protecting
the vehicle interior.......... 337
4-2. Maintenance
Maintenance
requirements.................. 340
General maintenance....... 342
4-3. Do-it-yourself
maintenance
Do-it-yourself service
precautions .................... 346
Hood ................................ 349
Positioning a floor jack ..... 351
Motor compartment.......... 355
Tires ................................. 366
Tire inflation pressure ...... 374
Wheels ............................. 378
Air conditioning filter......... 381
Electronic key battery....... 383
Checking and replacing
fuses .............................. 385
Headlight aim ................... 398
Light bulbs........................ 400
333
4-1. Maintenance and care