2014 Toyota Highlander Owners Manual

0.04 in. (1.0 mm)

8 11 clicks

SAE J1703 or FMVSS No.116 DOT 3

*1: Minimum pedal clearance when depressed with a force of 110 lbf (490 N,

50 kgf) while the engine is running

*2: Parking brake pedal travel when depressed with a force of 67 lbf (300 N,

31 kgf)

Steering

Free play

Less than 1.2 in. (30 mm)

HIGHLANDER_U (OM48A12U)

642

9-1. Specifications

Tires and wheels  Type A

Tire size

Tire inflation pres- sure (Recommended cold tire pressure)

inflation

245/60R18 105T, T165/90D18 107M (spare) Front

35 psi (240 kPa, 2.4 kgf/cm2 or bar)

Rear

Spare

35 psi (240 kPa, 2.4 kgf/cm2 or bar)

60 psi (420 kPa, 4.2 kgf/cm2 or bar)

Wheel size Wheel nut torque

18  7 1/2 J, 18 4T (spare) 76 ft•lbf (103 N•m, 10.5 kgf•m)

 Type B

Tire size

Tire inflation pres- sure (Recommended cold tire pressure)

inflation

P245/60R18 104T, T165/90D18 107M (spare) Front

35 psi (240 kPa, 2.4 kgf/cm2 or bar)

Rear

Spare

35 psi (240 kPa, 2.4 kgf/cm2 or bar)

60 psi (420 kPa, 4.2 kgf/cm2 or bar)

Wheel size Wheel nut torque

18  7 1/2 J, 18 4T (spare) 76 ft•lbf (103 N•m, 10.5 kgf•m)

 Type C

Tire size

Tire inflation pres- sure (Recommended cold tire pressure)

inflation

245/55R19 103T, T165/90D18 107M (spare) Front

35 psi (240 kPa, 2.4 kgf/cm2 or bar)

Rear

Spare

35 psi (240 kPa, 2.4 kgf/cm2 or bar)

60 psi (420 kPa, 4.2 kgf/cm2 or bar)

Wheel size Wheel nut torque

19  7 1/2 J, 18 4T (spare) 76 ft•lbf (103 N•m, 10.5 kgf•m)

HIGHLANDER_U (OM48A12U)

9-1. Specifications

643

 Type D

Tire size

Tire inflation pres- sure (Recommended cold tire pressure)

inflation

245/60R18 105T Front

35 psi (240 kPa, 2.4 kgf/cm2 or bar)

Rear

Spare

35 psi (240 kPa, 2.4 kgf/cm2 or bar)

35 psi (240 kPa, 2.4 kgf/cm2 or bar)

Wheel size Wheel nut torque

18  7 1/2 J 76 ft•lbf (103 N•m, 10.5 kgf•m)

 Type E

Tire size

Tire inflation pres- sure (Recommended cold tire pressure)

inflation

P245/60R18 104T Front

35 psi (240 kPa, 2.4 kgf/cm2 or bar)

Rear

Spare

35 psi (240 kPa, 2.4 kgf/cm2 or bar)

35 psi (240 kPa, 2.4 kgf/cm2 or bar)

Wheel size Wheel nut torque

18  7 1/2 J 76 ft•lbf (103 N•m, 10.5 kgf•m)

 Type F

Tire size

Tire inflation pres- sure (Recommended tire cold pressure)

inflation

245/55R19 103T Front

35 psi (240 kPa, 2.4 kgf/cm2 or bar)

Rear

Spare

35 psi (240 kPa, 2.4 kgf/cm2 or bar)

35 psi (240 kPa, 2.4 kgf/cm2 or bar)

Wheel size Wheel nut torque

19  7 1/2 J 76 ft•lbf (103 N•m, 10.5 kgf•m)

HIGHLANDER_U (OM48A12U)

644

9-1. Specifications

■When towing a trailer (245/55R19 103T tires)

On rear tires, add 1 psi (10.0 kPa, 0.1 kgf/cm2 or bar) to the recom- mended tire inflation pressure and drive at speeds below 65 mph (104
km/h).

HIGHLANDER_U (OM48A12U)

9-1. Specifications

645

Light bulbs

Light bulbs

Bulb No.

Headlights High beam Low beam Parking and front turn signal lights Front side marker lights Front fog lights* Rear turn signal lights Back-up lights Stop/tail and rear side marker lights Tail lights License plate lights Vanity lights Front lights Rear lights Door courtesy lights Luggage compartment light

interior/front personal

interior/rear personal

Exterior

Interior

60
55

9005


7444NA

28/8





















168


19
21
16

21/5

1.26

Type

A: HB3 halogen bulbs C: Wedge base bulbs (amber) E: H16 halogen bulbs *: If equipped

B: H11 halogen bulbs D: Wedge base bulbs (clear) F: Double end bulbs

HIGHLANDER_U (OM48A12U)

646

9-1. Specifications

Fuel information

You must only use unleaded gasoline in your vehicle. Select octane rating 87 (Research Octane Number 91) or higher. Use of unleaded gasoline with an octane rating lower than 87
may result in engine knocking. Persistent knocking can lead to engine damage. At minimum, the gasoline you use should meet the specifications of ASTM D4814 in the U.S.A. and CGSB3.5-M93 in Canada.

■Fuel tank opening for unleaded gasoline

To help prevent incorrect fueling, your vehicle has a fuel tank opening that only accommodates the special nozzle on unleaded fuel pumps.

■Gasoline quality

In very few cases, driveability problems may be caused by the brand of gaso- line you are using. If driveability problems persist, try changing the brand of gasoline. If this does not correct the problem, consult your Toyota dealer.

■Gasoline quality standards

●Automotive manufacturers in the U.S.A., Europe and Japan have developed a specification for fuel quality called the World-Wide Fuel Charter (WWFC), which is expected to be applied worldwide.

●The WWFC consists of four categories that are based on required emission

levels. In the U.S., category 4 has been adopted.

●The WWFC improves air quality by lowering emissions in vehicle fleets, and

improves customer satisfaction through better performance.

HIGHLANDER_U (OM48A12U)

9-1. Specifications

647

■Recommendation of the use of gasoline containing detergent additives ●Toyota recommends the use of gasoline that contains detergent additives to

avoid the build-up of engine deposits.

●All gasoline sold in the U.S.A. contains minimum detergent additives to clean and/or keep clean intake systems, per EPA’s lowest additives concen- tration program.

●Toyota strongly recommends the use of Top Tier Detergent Gasoline. For more information on Top Tier Detergent Gasoline and a list of marketers, please go to the official website www.toptiergas.com.

■Recommendation of the use of cleaner burning gasoline

Cleaner burning gasoline, including reformulated gasoline that contains oxy- genates such as ethanol or MTBE (Methyl Tertiary Butyl Ether) is available in many areas. Toyota recommends the use of cleaner burning gasoline and appropriately blended reformulated gasoline. These types of gasoline provide excellent vehicle performance, reduce vehicle emissions and improve air quality.

■Non-recommendation of the use of blended gasoline

●Use only gasoline containing up to 15%

ethanol. DO NOT use any flex-fuel or gasoline that could contain more than 15% etha- nol, including from any pump labeled E30, E50, E85 (which are only some examples of fuel containing more than 15% ethanol).

DO NOT use gasoline containing more than 15% ethanol.

(30% ethanol)

(50% ethanol)

(85% ethanol)

●If you use gasohol in your vehicle, be sure that it has an octane rating no

lower than 87.

●Toyota does not recommend the use of gasoline containing methanol.

HIGHLANDER_U (OM48A12U)

648

9-1. Specifications

■Non-recommendation of the use of gasoline containing MMT

Some gasoline contains an octane enhancing additive called MMT (Methylcy- clopentadienyl Manganese Tricarbonyl). Toyota does not recommend the use of gasoline that contains MMT. If fuel containing MMT is used, your emission control system may be adversely affected. The malfunction indicator lamp on the instrument cluster may come on. If this happens, contact your Toyota dealer for service.

■If your engine knocks

●Consult your Toyota dealer. ●You may occasionally notice light knocking for a short time while accelerat-

ing or driving uphill. This is normal and there is no need for concern.

NOTICE

■Notice on fuel quality

●Do not use improper fuels. If improper fuels are used, the engine will be

damaged.

●Do not use leaded gasoline.

Leaded gasoline can cause damage to your vehicle’s three-way catalytic converters causing the emission control system to malfunction.

●Do not use gasohol other than the type previously stated.

Other gasohol may cause fuel system damage or vehicle performance problems.

●Using unleaded gasoline with an octane number or rating lower than the

level previously stated will cause persistent heavy knocking. At worst, this will lead to engine damage.

■Fuel-related poor driveability

If poor driveability is encountered after using a different type of fuel (poor hot starting, vaporization, engine knocking, etc.), discontinue the use of that type of fuel.

■When refueling with gasohol

Take care not to spill gasohol. It can damage your vehicle’s paint.

HIGHLANDER_U (OM48A12U)

Tire information

Typical tire symbols

 Full-size tire

 Compact spare tire

9-1. Specifications

649

HIGHLANDER_U (OM48A12U)

650

9-1. Specifications

10

11

(P. 652) (P. 651) (P. 515)

Tire size DOT and Tire Identification Number (TIN) Location of treadwear indicators Tire ply composition and materials Plies are layers of rubber-coated parallel cords. Cords are the strands which form the plies in a tire. Radial tires or bias-ply tires A radial tire has “RADIAL” on the sidewall. A tire not marked “RADIAL” is a bias-ply tire. TUBELESS or TUBE TYPE A tubeless tire does not have a tube and air is directly put into the tire. A tube type tire has a tube inside the tire and the tube maintains the air pressure. Load limit at maximum cold tire inflation pressure Maximum cold tire inflation pressure This means the pressure to which a tire may be inflated. Uniform tire quality grading For details, see “Uniform Tire Quality Grading” that follows. Summer tires or all season tires (P. 519) An all season tire has “M+S” on the sidewall. A tire not marked “M+S” is a summer tire. “TEMPORARY USE ONLY” A compact spare tire is identified by the phrase “TEMPORARY USE ONLY” molded on its sidewall. This tire is designed for temporary emergency use only.

(P. 656) (P. 656)

HIGHLANDER_U (OM48A12U)

Typical DOT and Tire Identification Number (TIN)

9-1. Specifications

651

DOT symbol* Tire Identification Number (TIN) Tire manufacturer’s identifica- tion mark Tire size code Manufacturer’s optional type code (3 or 4 letters) Manufacturing week Manufacturing year

tire

*: The DOT symbol certifies that the tire conforms to applicable Federal Motor Vehicle Safety Standards.

HIGHLANDER_U (OM48A12U)

652

9-1. Specifications

Tire size ■ Typical tire size information

The illustration indicates typical tire size.

Tire use (P = Passenger car, T = Temporary use) Section width (millimeters) Aspect ratio (tire height to section width) Tire construction code (R = Radial, D = Diagonal) Wheel diameter (inches) Load index (2 digits or 3 digits) Speed symbol (alphabet with one letter)

■ Tire dimensions Section width Tire height Wheel diameter

HIGHLANDER_U (OM48A12U)

9-1. Specifications

653

Tire section names

10

11

Bead Sidewall Shoulder Tread Belt Inner liner Reinforcing rubber Carcass Rim lines Bead wires Chafer

HIGHLANDER_U (OM48A12U)

654

9-1. Specifications

Uniform Tire Quality Grading This information has been prepared in accordance with regulations issued by the National Highway Traffic Safety Administration of the U.S. Department of Transportation. It provides the purchasers and/or prospective purchasers of Toyota vehicles with information on uniform tire quality grading.

Your Toyota dealer will help answer any questions you may have as you read this information.

■ DOT quality grades

All passenger vehicle tires must conform to Federal Safety Require- ments in addition to these grades. Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width.

For example: Treadwear 200 Traction AA Temperature A

■ Treadwear

The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a speci- fied government test course.

For example, a tire graded 150 would wear one and a half (1 - 1/2) times as well on the government course as a tire graded 100. The relative performance of tires depends upon the actual condi- tions of their use. Performance may differ significantly from the norm due to variations in driving habits, service practices and differences in road characteristics and climate.

■ Traction AA, A, B, C

The traction grades, from highest to lowest, are AA, A, B and C, and they represent the tire’s ability to stop on wet pavement as measured under controlled conditions on specified government test surfaces of asphalt and concrete.

A tire marked C may have poor traction performance. Warning: The traction grade assigned to this tire is based on braking (straight ahead) traction tests and does not include cornering (turn- ing) traction.

HIGHLANDER_U (OM48A12U)

9-1. Specifications

655

■ Temperature A, B, C

The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its ability to dissi- pate heat when tested under controlled conditions on a specified indoor laboratory test wheel.

Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure. Grade C corresponds to a level of performance which all passenger car tires must meet under the Federal Motor Vehicle Safety Stan- dard No. 109. Grades B and A represent higher levels of performance on the labo- ratory test wheel than the minimum required by law. Warning: The temperature grades of a tire assume that it is properly inflated and not overloaded. Excessive speed, underinflation, or excessive loading, either sepa- rately or in combination, can cause heat buildup and possible tire failure.

HIGHLANDER_U (OM48A12U)

656

9-1. Specifications

Glossary of tire terminology

Tire related term

Meaning

Cold tire inflation pres- sure

Maximum pressure

inflation

Recommended tion pressure

infla-

Accessory weight

Curb weight

Maximum loaded vehi- cle weight

Normal weight

occupant

Occupant distribution

Tire pressure when the vehicle has been parked for three hours or more, or has not been driven more than 1 mile or 1.5 km under that condition The maximum cold inflated pressure to which a tire may be inflated, shown on the sidewall of the tire Cold tire inflation pressure recommended by a manufacturer The combined weight (in excess of those stan- dard items which may be replaced) of auto- matic transmission, power steering, power brakes, power windows, power seats, radio and heater, to the extent that these items are available as factory-installed equipment (whether installed or not) The weight of a motor vehicle with standard equipment, including the maximum capacity of fuel, oil and coolant, and if so equipped, air conditioning and additional weight optional engine The sum of: (a) Curb weight (b) Accessory weight (c) Vehicle capacity weight (d) Production options weight 150 lb. (68 kg) times the number of occupants specified in the second column of Table 1* that follows Distribution of occupants in a vehicle as speci- fied in the third column of Table 1* below

HIGHLANDER_U (OM48A12U)

9-1. Specifications

657

Tire related term

Meaning

Production weight

options

Rim

Rim diameter (Wheel diameter) Rim size designation

Rim type designation

Rim width Vehicle weight capacity)

capacity load

(Total

Vehicle maximum load on the tire

Vehicle normal load on the tire

Weather side

Bead

Bead separation

The combined weight of installed regular pro- duction options weighing over 5 lb. (2.3 kg) in excess of the standard items which they replace, not previously considered in curb weight or accessory weight, including heavy duty brakes, ride levelers, roof rack, heavy duty battery, and special trim A metal support for a tire or a tire and tube assembly upon which the tire beads are seated

Nominal diameter of the bead seat

Rim diameter and width The industry manufacturer’s designation for a rim by style or code Nominal distance between rim flanges The rated cargo and luggage load plus 150 lb. (68 kg) times the vehicle’s designated seating capacity The load on an individual tire that is deter- mined by distributing to each axle its share of the maximum loaded vehicle weight, and dividing by two The load on an individual tire that is deter- mined by distributing to each axle its share of curb weight, accessory weight, and normal occupant weight (distributed in accordance with Table 1* below), and dividing by two The surface area of the rim not covered by the inflated tire The part of the tire that is made of steel wires, wrapped or reinforced by ply cords and that is shaped to fit the rim A breakdown of the bond between compo- nents in the bead

HIGHLANDER_U (OM48A12U)

658

9-1. Specifications

Tire related term

Meaning

Bias ply tire

Carcass

Chunking

Cord

Cord separation

Cracking

CT

Extra load tire

Groove

Innerliner

Innerliner separation

Intended sidewall

outboard

A pneumatic tire in which the ply cords that extend to the beads are laid at alternate angles substantially less than 90 degrees to the centerline of the tread The tire structure, except tread and sidewall rubber which, when inflated, bears the load The breaking away of pieces of the tread or sidewall The strands forming the plies in the tire The parting of cords from adjacent rubber compounds Any parting within the tread, sidewall, or inner- liner of the tire extending to cord material A pneumatic tire with an inverted flange tire and rim system in which the rim is designed with rim flanges pointed radially inward and the tire is designed to fit on the underside of the rim in a manner that encloses the rim flanges inside the air cavity of the tire A tire designed to operate at higher loads and at higher inflation pressures than the corre- sponding standard tire The space between two adjacent tread ribs The layer(s) forming the inside surface of a tubeless tire that contains the inflating medium within the tire The parting of the innerliner from cord material in the carcass (a) The sidewall that contains a whitewall, bears white lettering, or bears manufac- turer, brand, and/or model name molding that is higher or deeper than the same molding on the other sidewall of the tire, or (b) The outward facing sidewall of an asym- metrical tire that has a particular side that must always face outward when mounted on a vehicle

HIGHLANDER_U (OM48A12U)

Tire related term

Meaning

9-1. Specifications

659

Light truck (LT) tire

Load rating

Maximum load rating

Maximum permissible inflation pressure

Measuring rim

Open splice

Outer diameter

Overall width

Passenger car tire

Ply

Ply separation

Pneumatic tire

Radial ply tire

Reinforced tire

A tire designated by its manufacturer as pri- marily intended for use on lightweight trucks or multipurpose passenger vehicles The maximum load that a tire is rated to carry for a given inflation pressure The load rating for a tire at the maximum per- missible inflation pressure for that tire The maximum cold inflation pressure to which a tire may be inflated The rim on which a tire is fitted for physical dimension requirements Any parting at any junction of tread, sidewall, or innerliner that extends to cord material The overall diameter of an inflated new tire The linear distance between the exteriors of the sidewalls of an inflated tire, including ele- vations due to labeling, decorations, or protec- tive bands or ribs A tire intended for use on passenger cars, multipurpose passenger vehicles, and trucks, that have a gross vehicle weight rating (GVWR) of 10,000 lb. or less. A layer of rubber-coated parallel cords A parting of rubber compound between adja- cent plies A mechanical device made of rubber, chemi- cals, fabric and steel or other materials, that, when mounted on an automotive wheel, pro- vides the traction and contains the gas or fluid that sustains the load A pneumatic tire in which the ply cords that extend to the beads are laid at substantially 90
degrees to the centerline of the tread A tire designed to operate at higher loads and at higher inflation pressures than the corre- sponding standard tire

HIGHLANDER_U (OM48A12U)

660

9-1. Specifications

Tire related term

Meaning

Section width

Sidewall

Sidewall separation

Snow tire

Test rim

Tread

Tread rib

Tread separation

Treadwear (TWI)

indicators

Wheel-holding fixture

The linear distance between the exteriors of the sidewalls of an inflated tire, excluding ele- vations due to labeling, decoration, or protec- tive bands That portion of a tire between the tread and bead The parting of the rubber compound from the cord material in the sidewall A tire that attains a traction index equal to or greater than 110, compared to the ASTM E- 1136 Standard Reference Test Tire, when using the snow traction test as described in ASTM F-1805-00, Standard Test Method for Single Wheel Driving Traction in a Straight Line on Snow-and Ice-Covered Surfaces, and which is marked with an Alpine Symbol ( on at least one sidewall The rim on which a tire is fitted for testing, and may be any rim listed as appropriate for use with that tire That portion of a tire that comes into contact with the road around a tire Pulling away of the tread from the tire carcass The projections within the principal grooves designed to give a visual indication of the degrees of wear of the tread The fixture used to hold the wheel and tire assembly securely during testing

tread section running circumferentially

*: Table 1  Occupant loading and distribution for vehicle normal load for

various designated seating capacities

HIGHLANDER_U (OM48A12U)

9-1. Specifications

661

Designated seating capacity, Number of

occupants 2 through 4

5 through 10

11 through 15

16 through 20

Vehicle normal load, Number of occupants

Occupant distribution in a normally loaded

vehicle 2 in front

2 in front, 1 in second

seat

2 in front, 1 in second seat, 1 in third seat, 1

in fourth seat

2 in front, 2 in second seat, 2 in third seat, 1

in fourth seat

HIGHLANDER_U (OM48A12U)

662

9-2. Customization

Customizable features Your vehicle includes a variety of electronic features that can be personalized to your preferences. The settings of these features can be changed by the meter control switches, on the audio sys- tem screen or at your Toyota dealer.

Customizing vehicle features (audio system screen) ■ Audio system with “CAR” button

Press the “SETUP” button. Touch “Vehicle” on the “Setup” screen. Select the desired item.

■ Audio system with “APPS” button

Press the “APPS” button. Touch “Setup” on the “Apps” screen and select “Vehicle”. Select the desired item.

Various setting can be changed. Refer to the list of settings that can be changed for details.

Customizing vehicle features (meter control switches) ■ Changing by the meter control switches

P. 99, 102

HIGHLANDER_U (OM48A12U)

9-2. Customization

663

Customizable features Some function settings are changed simultaneously with other func- tions being customized. Contact your Toyota dealer for further details.

Settings that can be changed on the audio system screen Settings that can be changed by the meter control switches Settings that can be changed by your Toyota dealer Definition of symbols: O = Available, — = Not available ■ Gauges, meters and multi-information display (P. 94, 97, 101)

 Vehicles with monochrome display

Function*1

Default setting

Customized set-

ting

Language*2

English

Units*2

miles (MPG US)

French Spanish km (km/L)

km (L/100 km) miles (MPG

Imperial)

O O —

O O —

Indicator

Eco Driving Light  Vehicles with color display

On

(Self-lighting)

Off

— O —

Function*1

Default setting

Customized set-

ting

Language*2

English

Units*2

miles (MPG US)

French Spanish km (km/L)

km (L/100 km) miles (MPG

Imperial)

Maintenance system ini- tialization*3
Eco Driving Light

Indicator

Off

On

(Self-lighting)

On

Off

O O —

O O —

— O —

— O —

HIGHLANDER_U (OM48A12U)

664

9-2. Customization

Function*1

switch settings

Default setting

Customized set-

ting

Drive informa-

tion 1

Desired status

screen*4

Drive information 1

Drive information 2

Drive information 3

Pop-up display

Current fuel con-

sumption

Average fuel economy (after

reset)

Distance (driving

range)

Average fuel economy (after

refueling)

Driving distance

(after reset)

Average vehicle

speed (after

reset) On

Accent color

Light blue

Speed limit display*6

On with the

speed limit cau- tion indicator (yellow) enabled

*5

*5

*5

Off Blue

Orange Yellow

On with the

speed limit cau- tion indicator (yellow) not

enabled

— O —

— O —

— O —

— O —

— O —

— O —

— O —

— O —

O O —

— O O

Off

*1: For details about each function: P. 99, 104
*2: The default setting varies according to country. *3: U.S.A. only *4: Some status screens cannot be registered (indicated on multi-information *5: 6 of the following items: current fuel consumption, average fuel economy (after reset), average fuel economy (after refuel), average fuel economy (after start), average vehicle speed (after reset), average vehicle speed (after start), distance (driving range), elapsed time (after reset), elapsed time (after start), distance (after start), driving distance (after reset), blank.

display).

*6: Speed limit display may not be available for some regions.

HIGHLANDER_U (OM48A12U)

9-2. Customization

665

■ Door lock (P. 121, 129, 618)

Function

Default setting

Customized set-

ting

Unlocking using a key

Automatic door lock

Driver’s door unlocked in one step, all doors unlocked in two

steps

Shifting the shift lever to position

other than P

Automatic door unlock

Shifting the shift

lever to P

All doors

unlocked in one

step

Off

Vehicle speed is approximately 12 mph (20 km/h) or

higher

Off

Driver’s door is

opened

— — O

O — O

O — O

■ Smart key system* and wireless remote control (P. 121, 129)

Function

Default setting

Level 5

On

60 seconds

Customized set-

ting Off

Level 1 to 7

Off

Off

30 seconds

120 seconds

O — O

O — O

O — O

On

Off

— — O

Operation buzzer vol- ume

door

Operation signal (Emergency flashers) Time elapsed before automatic lock function is activated if door is not opened after being unlocked Open buzzer *: If equipped

door warning

HIGHLANDER_U (OM48A12U)

666

9-2. Customization

■ Smart key system* (P. 121, 129, 147)

Function

Default setting

On

Smart key system Number of consecutive door lock operations *: If equipped ■ Wireless remote control (P. 114, 121, 129)

2 times

Customized set-

ting Off

As many as

desired

Function

Default setting

Wireless remote control

On

Customized set-

ting Off

Driver’s door unlocked in one step, all doors unlocked in two

All doors

unlocked in one

step

— — O

— — O

— — O

O — O

Unlocking operation

steps Reservation lock* On On Alarm (panic mode) *: Vehicles without smart key system ■ Power back door* (P. 129)

Off Off

O — O — — O

Function

Default setting

Customized set-

ting

Power back door open- ing angle *: If equipped

Opening angle 5 Opening angle 1

to 4

O — O

HIGHLANDER_U (OM48A12U)

9-2. Customization

667

■ Driving position memory* (P. 164)

Function

Default setting

Customized set-

ting

Selecting the door link- ing driving position mem- ory with door unlock operation *: If equipped ■ Power windows and moon roof*(P. 178, 182)

Driver’s door

All doors

Function

Default setting

Key linked operation Wireless remote control linked operation (open only) Wireless remote control linked operation signal (buzzer) *: If equipped ■ Power windows (P. 178)

Off

Off

On

Customized set-

ting On

On

Off

— — O

— — O

— — O

— — O

Function

Default setting

Customized set-

ting

One-touch close opera- tion using the power win- dow switches on the front passenger door and each rear door One-touch front passen- ger window or rear side window close operation using the power window switch on the driver’s door

On

On

HIGHLANDER_U (OM48A12U)

Off

— — O

Off

— — O

668

9-2. Customization

■ Moon roof* (P. 182)

Function

Default setting

Customized set-

ting

Linked operation of com- ponents when mechani- cal key is used (open only) Linked operation of com- ponents when wireless remote control is used *: If equipped ■ Turn signal lever (P. 239)

Slide only

Slide only

Function

Default setting

The number of times the turn signal lights flash automatically when the turn is moved to the first posi- tion lane change*1

during

signal

lever

Tilt only

— — O

Tilt only

— — O

Customized set-

ting Off*2

4 to 7

— — O

*1: After flashing the turn signal lights when turning left or right while this func- tion is off and the turn signal lever is moved to the first position in the direc- tion of the flashing light, the turn signal lights can be selected to be flashing or off.

*2: The turn signal lights will be off if the turn signal lever is moved to the first

position in the direction of flashing light.

HIGHLANDER_U (OM48A12U)

9-2. Customization

669

■ Automatic light control system (P. 241)

Function

Default setting

Light sensor sensitivity Time elapsed before headlights automatically turn off after doors are closed ■ Lights (P. 241)

Standard

30 seconds

Customized set-

ting -2 to 2

Off

60 seconds 90 seconds

O — O

O — O

Function

Default setting

Customized set-

ting

light

running

Daytime system* *: U.S.A. only ■ Intuitive parking assist*1 (Refer to “Navigation and Multimedia

O — O

On

Off

System Owner’s Manual”)

Function

Default setting

Customized set-

ting

Detection distance of the rear center sensor Buzzer volume Display setting*2

Far

Near

O — O

Level 3

Level 1 to 5

O — O

All sensors dis-

played

Display off

O — O

*1: If equipped *2: When intuitive parking assist is operating. ■ Automatic air conditioning system* (P. 428)

Function

Default setting

Customized set-

ting