Download PDF Manual

and the player will scan all the tracks on the disc you are to. To stop scanning, push this button again. If the player scanned all the tracks on the disc, it will stop scanning.


listening


(Seeking/Tracking up or


With compact disc changer only— Scanning the first tracks of all the discs in the magazine: Push the “SCAN” button until you hear a ·SCAN” will appear on the dis- beep. “ play and the player will scan the first track on the next disc. To stop scanning, push this button again. If the player has scanned all the discs, it will stop scan- ning. SEEK/TRACK down) Radio In plays station band. To seek the next station, quickly push and release “Ɯ” or “Ɲ” side of the “SEEK/ TRACK” button. Do this again to find the station after that. Cassette Player Use this button to skip up or down to locate a song or recording. You can select up to nine recordings (in- cluding current one). A blank space of at least 3 seconds is considered to be a start of a recording.


the radio finds and the next station up or down the


the seek mode,


When the beginning of a tape is reached, the player automatically resumes play. When the end of the tape is reached, the player automatically reverses sides and resumes normal play. In addition, the feature may not work well with some spoken word, live, or classical recordings. Compact disc player Use this button to skip up or down to a different track. the “SEEK/ Push “Ɯ” or “Ɲ” side of TRACK” button until the number of the track you want to listen to appears on the display. If you want to return to the begin- ning of the current track, quickly push the down side of the button one time. ST (Stereo reception) display Your radio automatically changes to stereo reception when a stereo broadcast is re- ceived. “ST” appears on the display. If the signal becomes weak, the radio reduces the amount of channel separation to prev- ent the weak signal from creating noise. If the signal becomes extremely weak, the radio switches from stereo to mono recep- tion.


157


2006 CAMRY from July ‘05 Prod. (OM33708U)


’06Camry_U (L/O 0507)


TAPE Push the “TAPE” button to play a cassette tape. TUNE (Tuning) Push and release the “Ɯ” or “Ɲ” side of “TUNE” button to step up or down the frequency. If you push and hold the “Ɯ” or “Ɲ” side of the “TUNE” button, the radio will contin- ue seeking up or down for frequencies and will stop at the next frequency that it finds after the button is released. Press the button again to resume the search.


158


2006 CAMRY from July ‘05 Prod. (OM33708U)


’06Camry_U (L/O 0507)


"Type 3


Details of specific buttons, controls and features are described in the alphabetical list that follows.


159


2006 CAMRY from July ‘05 Prod. (OM33708U)


’06Camry_U (L/O 0507)


To eject all discs at a time, press and hold the eject button until you hear a beep. The last compact disc played before pushing the button will be ejected first. If the ejected disc is not removed for a long time, the eject function will be cancelled.


(Program)


” indicates the top side, “


Push “ ” (preset button 4) to select the other side of a cassette tape. The display indicates which side is currently selected (“ ” indicates the bottom side). Auto−reverse the cassette player reaches the end of a tape side, it automatically reverses and begins to play the other side. This is true whether the cassette was playing or fast−forwarding.


feature: After


To recall a preset channel: Push the but- ton for the channel you want. The preset button number and channel number will appear on the display. This radio can store three XM channels for each button. (The display will show “SAT1”, “SAT2” or “SAT3” when you push “SAT” button.) ∗: Use of satellite radio requires XM tuner and service. Contact your Toyota deal- er for details.


(Eject button)


Cassette player This button is used to eject a cassette. Compact disc player This button is used to eject one or all compact discs. To eject the current compact disc, push and release the compact disc eject button. To eject a specific disc, push “Ɲ” (preset button 3) or “Ɯ” (preset button 4) until the number of the disc you want to eject is displayed. Push and release the eject but- ton.


(See


to preset and


1 2 3 4 5 6 (Preset buttons) These buttons are used tune in radio stations. To preset a station to a button: Tune in the desired station. “TUNE” or “SEEK/TRACK”.) Push and hold down the button until you hear a beep—this will set the station to the button. The preset but- ton number will appear on the display. To recall a preset station: Push the button for the station you want. The preset but- ton number and station frequency will ap- pear on the display. This radio can store one AM and two FM stations for each button. (The display will show “AM”, “FM1” or “FM2” when you push “AM” or “FM” button.) XM satellite radio∗— These buttons are used tune in radio channels. To preset a channel to a button: Tune in the desired channel. “TUNE” or “SEEK/TRACK”.) Push and hold down the button until you hear a beep—this will set the channel to the button. The preset but- ton number will appear on the display.


to preset and


(See


160


2006 CAMRY from July ‘05 Prod. (OM33708U)


’06Camry_U (L/O 0507)


(Reverse/Fast−forward button)


Cassette player


” (preset button 6) to fast−for- Push “ ward a cassette tape. “FF” will appear on the display. Push “ ” (preset button 5) to rewind a tape. “REW” will appear on the display. To stop the tape while it is fast−forward- ” or “TAPE” button. To stop ing, push “ the tape while it is rewinding, push “ ” or “TAPE” button. If a tape rewinds completely, the cassette player will stop and then play that same side. If a tape fast−forwards completely, the cassette will play the other side of the tape using the auto−reverse feature. Compact disc player


” (preset button 6) or Push and hold “ “ ” (preset button 5) to fast−forward or reverse within a compact disc. When you release the button, the compact disc play- er will resume playing. AM Push the “AM” button to turn on the radio and select the AM band. “AM” will appear on the display.


the


the


you


turn


time


tone and balance,


AUDIO CONTROL (Tone and sound bal- ance adjustment function) “AUDIO Each push CONTROL” knob, the mode changes. To adjust the knob. BAS: Adjusts low−pitched tones. The dis- play ranges from −5 to 5. MID: Adjusts mid−pitched tones. The dis- play ranges from −5 to 5. TRE: Adjusts high−pitched tones. The dis- play ranges from −5 to 5. FAD: Adjusts the sound balance between the front and rear speakers. The display ranges from F7 to R7. BAL: Adjusts the sound balance between the right and left speakers. The display ranges from L7 to R7. DISC (Compact disc) Push the “DISC” button to play a compact disc. When the audio system is set into com- pact disc operation, the display shows the track, or track and disc number currently being played.


inserted


incorrectly


Error messages If the player malfunctions, your audio sys- tem will display following error messages. “WAIT”: The compact disc player unit may be too hot. Allow the player to cool down. “ERROR 1”: The disc may be dirty, dam- aged or (up−side down). Clean the disc and re−insert it. “NO DISC”: The compact disc changer of separate unit is empty. Insert a disc. “ERROR 3”: There is a problem inside the system. Eject the disc or magazine. Set the disc or magazine again. “ERROR 4”: Over−current. Ask your Toyota dealer to inspect. “CD OPEN”: The compact disc changer lid of separate unit is open. Close the compact disc changer lid. If the malfunction still exists, take your vehicle to your Toyota dealer.


161


2006 CAMRY from July ‘05 Prod. (OM33708U)


’06Camry_U (L/O 0507)


B NR∗


” (preset button 3). “


Ɲ DISC Ɯ Use these buttons to select a disc you want to listen to. Push “Ɲ” (preset button 3) or “Ɯ” (preset button 4) until the number of the disc you want to listen appears on the display. Dolbyr If you are listening to a tape that was recorded with Dolbyr B Noise Reduction, push “ ” will appear on the display. Push the button again to turn off Dolbyr B NR. The Dolby NR mode reduces tape noise by about 10 dB. For best sound reproduc- tion, play your tapes with this button on or off according to the mode used to re- cord the tape. ∗ : Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation. “DOLBY” and the double D symbol are trademarks of Dolby Laboratories Licensing Corporation. FM Push the “FM” button to turn on the radio and select the FM band. “FM1” or “FM2” will appear on the display. This system allows you to set twelve FM stations, two for each of the preset button.


in


LOAD This button is used to load the compact discs the compact disc player. This player can store up to six discs. To load one compact disc only, quickly push and release the button, then insert a compact disc. After the disc is loaded, the shutter of the slot will close. If no compact disc is inserted, the shutter will close after 15 seconds. To load multiple compact discs, push and hold the button (until you hear a beep when the audio system is on), then insert the first compact disc. After the disc is loaded, the shutter of the slot will close. After a few seconds, the shutter will auto- matically open again so the next disc can be inserted. The same process can be applied for loading the rest of the discs. If the player is full of discs, “DISC FULL” will appear on the display. If no compact disc is inserted, the shutter will close after 15 seconds.


in random order, or


PWR·VOL (Power and Volume) Push “PWR·VOL” to turn the audio system on and off. Turn “PWR·VOL” to adjust the volume. RAND (Random) There are two random features—you can either listen to the tracks on one compact to disc the listen tracks on all the compact discs in the magazine in random order. To play the tracks on one disc in random order: Quickly push and release “RAND” (preset ” will appear on the button 1). “ display and the player will perform the tracks on the disc you are listening to in random order. To turn off the random fea- ture, push this button again. To play all the tracks in the magazine in random order: Push and hold “RAND” (preset button 1) ” will ap- until you hear a beep. “ pear on the display and the player will perform all the tracks on all the discs in the magazine in random order. To turn off the this button again.


feature, push


random


162


2006 CAMRY from July ‘05 Prod. (OM33708U)


’06Camry_U (L/O 0507)


RDS (Radio Data System) display The radio will automatically switch to the RDS mode to receive an RDS station while turned to FM broadcasts. “RDS” will appear on the display. RPT (Repeat) Cassette player Push “RPT” (preset button 2) while the ” will appear on track is playing. “ the display. When the track ends, it will automatically rewind and replay. To turn off feature, push this button again. There must be at least 3 seconds of blank space between tracks in order for the re- peat feature to work correctly.


the repeat


the


track


Compact disc player There are two repeat features—you can either replay a disc track or a whole com- pact disc. Repeating a track: Quickly push and release “RPT” (preset button 2) while is playing. ” will appear on the display. When “ the track ends, it will automatically replay. To turn off the repeat feature, push this button again. Repeating a disc: Push and hold “RPT” (preset button 2) until you hear a beep. “ ” will ap- pear on the display. The player will repeat all the tracks on the disc you are listening to. When the disc ends, the player will automatically go back to the first track on the disc and replay. To turn off the repeat feature, push this button again.


three


for each of


SAT∗ (Satellite radio) Push the “SAT” button to turn on the radio and select the XM band. “SAT1”, “SAT2” or “SAT3” will appear on the display. This to set eighteen XM system allows you channels, the preset button. Error messages If tuner malfunctions, your audio system will display following error messages. “ANTENNA”: D The XM antenna


is not connected. Check whether the XM antenna cable is attached securely.


the satellite radio


D A short−circuit occurs in the antenna or the surrounding antenna cable. See a Toyota certified dealer.


163


2006 CAMRY from July ‘05 Prod. (OM33708U)


’06Camry_U (L/O 0507)


the radio returns


“LOADING”: The unit is acquiring audio or program information. Wait until the unit has received the information. “OFF AIR”: The channel you selected is not broadcasting any programming. Select another channel. “− − −”: The channel you selected is no longer available. Wait for about 2 seconds until the previous channel or “CH001”. If it does not change automatically, select another channel. The XM Listener Care Center is also available on the phone, please call (800) 852−9696 during the following hours: Monday—Saturday: 7 a.m.—1 a.m. Sunday: 12 p.m.—12 a.m. ∗: Use of satellite radio requires XM tuner and service. Contact your Toyota deal- er for details.


to


“UPDATING”: D You have not subscribed to


the XM satellite radio. The radio is being up- dated with the latest encryption code. Contact the XM satellite radio for sub- scription information. When a contact is canceled, you can choose the “CH000” and all free−to−air channels.


D The premium channel you selected is not authorized. Wait for about 2 sec- onds until the radio returns to the pre- vious channel or “CH001”. If it does not change automatically, select anoth- er channel. If you want to listen to the premium channel, contact the XM satel- lite radio.


“NO SIGNAL”: The XM signal too weak at the current location. Wait until your vehicle reaches a location with a stronger signal.


is


164


SCAN Radio You can either scan all the frequencies on a band or scan only the preset stations for that band. To scan the preset stations: Push and hold the “SCAN” button until you hear a beep. The radio will tune in the next preset station up the band, stay there for 5 seconds, and then move to the next preset station. To stop scanning, push this button again. To scan all the frequencies: Quickly push and release the “SCAN” but- ton. The radio will find the next station up the station band, stay there for 5 seconds, and then scan again to the next station. To stop scanning, push this button again.


2006 CAMRY from July ‘05 Prod. (OM33708U)


XM satellite radio∗— You can either scan the currently selected channel category or scan only the preset channels for that band. To scan the preset channels: Push and hold the “SCAN” button until you hear a beep. “SCAN” appears on the display. The radio will tune in the next preset channel up the band, stay there for 5 seconds, and then move to the next preset channel. To stop scanning, push this button again. To scan category: Quickly push and release the “SCAN” but- ton. “SCAN” appears on the display. The radio will the same channel category up the band, stay there for 5 seconds, and then scan again. To stop scanning, push this button again. ∗: Use of satellite radio requires XM tuner and service. Contact your Toyota deal- er for details.


the currently selected channel


the next channel


find


in


’06Camry_U (L/O 0507)


Compact disc player There are two scan features—you can ei- ther scan the tracks on a specific disc or scan the first tracks of all the discs in the magazine. Scanning the tracks on a disc: Quickly push and release the “SCAN” but- ton. “SCAN” will appear on the display and the player will scan all the tracks on the disc you are to. To stop scanning, push this button again. If the player scanned all the tracks on the disc, it will stop scanning. Scanning the first tracks of all the discs in the magazine: Push the “SCAN” button until you hear a ·SCAN” will appear on the dis- beep. “ play and the first the player will scan track on the next disc. To stop scanning, push this button again. If the player has scanned all the discs, it will stop scan- ning.


listening


the seek mode,


(Seeking/Tracking up or


the radio finds and the next station up or down the


SEEK/TRACK down) Radio In plays station band. To seek the next station, quickly push and release “Ɯ” or “Ɲ” side of the “SEEK/ TRACK” button. Do this again to find the station after that. XM satellite radio∗— To select the next channel within the cur- rent channel category, push the “Ɯ” or “Ɲ” side of the “SEEK/TRACK” button. Repeat until a desired channel is found. ∗: Use of satellite radio requires XM tuner and service. Contact your Toyota deal- er for details.


165


2006 CAMRY from July ‘05 Prod. (OM33708U)


’06Camry_U (L/O 0507)


ST (Stereo reception) display Your radio automatically changes to stereo reception when a stereo broadcast is re- ceived. “ST” appears on the display. If the signal becomes weak, the radio reduces the amount of channel separation to prev- ent the weak signal from creating noise. If the signal becomes extremely weak, the radio switches from stereo to mono recep- tion. TAPE Push the “TAPE” button to play a cassette tape. TEXT Radio This button is operational in RDS mode. When an RDS station text message, “MSG” will appear on the dis- played. To display the text message, first push the “TEXT” button the radio station display. Then push the “TEXT” but- ton once more to display, and the mes- sage will appear on the display.


transmits a


to change


Cassette Player Use this button to skip up or down to locate a song or recording. You can select up to nine recordings (in- cluding current one). A blank space of at least 3 seconds is considered to be a start of a recording. When the beginning of a tape is reached, the player automatically resumes play. When the end of the tape is reached, the player automatically reverses sides and resumes normal play. In addition, the feature may not work well with some spoken word, live, or classical recordings. Compact disc player Use this button to skip up or down to a different track. the “SEEK/ Push “Ɯ” or “Ɲ” side of the number of the TRACK” button until track you want to listen to appears on the display. If you want to return to the begin- ning of the current track, quickly push the down side of the button one time.


166


received,


the display


that affects


If the entire the message is not displayed, ” will appear on the display. To display “ the rest of the message, push and hold the “TEXT” button until you hear a beep. After the entire message has been dis- played, the message will disappear. The message display will be canceled if any button is pushed. If no messages are “NO MESSAGE” will appear on the display, and the display returns to the previous mode. The message display will be canceled if you activate any function that affects the display. XM satellite radio∗1— When you push the “TEXT” button, the display changes as follows: CH NAME → TITLE (SONG/PROGRAM TITLE) → NAME (ARTIST NAME/ FEATURE) → CH NUMBER → CH NAME Up to 10 alphanumeric characters can be displayed. (Some information will not be fully displayed.)


2006 CAMRY from July ‘05 Prod. (OM33708U)


the display


that affects


The message display will be canceled if any button is pushed. If there is no song/program title or artist name/feature associated with the channel at that time, “− − − − −” will appear on the display. This XM tuner supports “Audio Services” (Music and Talk) of only XM satellite radio and “Text Information”∗2 linked to the re- spective audio services. ∗1: Use of satellite radio requires XM tuner and service. Contact your Toyota deal- er for details.


∗2: Text


Information


includes, Channel Name, (Artist) Name, (Song) Title and Category Name.


’06Camry_U (L/O 0507)


to


Compact disc player This button is used to change the display for the compact disc that contains text data. To change the display, quickly push and release the “TEXT” button while the com- pact disc is playing. The display changes in the order from the elapsed time to disc title the elapsed time. If this button is pushed while a compact disc that does not contain text data is playing, “NO TITLE” will appear on the display. If the entire disc or track title does not appear on the display, push and hold the button until you hear a beep. The rest of the title will appear.


then back


track


title,


to


the


“TRAF” button,


TRAF (Traffic) This button turns the traffic announcement (TA) feature on and off. This button is operational only in FM mode. By pushing “TRAF SEEK” will flash on the display and the radio will seek a traffic program station. After the traffic announcement program is over, the display returns to the previous mode. If no traffic program station is found, “NO TRAFINFO” appears on the display, and the display returns to the previous mode and a beep sound. To cancel the traffic announcement, push this button again. TUNE (Tuning) Turn the “TUNE” knob clockwise to step up the frequency. Turn the knob counter- clockwise to step down the frequency. XM satellite radio∗— Turn the “TUNE” knob clockwise to step up the channel. Turn the knob counter- clockwise to step down the channel. ∗: Use of satellite radio requires XM tuner and service. Contact your Toyota deal- er for details.


167


2006 CAMRY from July ‘05 Prod. (OM33708U)


TYPE When you push the “Ɯ” or “Ɲ” side of the “TYPE” button while receiving an RDS station, the current program type appears on the display. Each time you push “Ɯ” or “Ɲ” side of this button, the program type changes as in the following: D ROCK D EASY LIS (Easy listening) D CLS/JAZZ (Classical music and Jazz) D R&B (Rhythm and Blues) D INFORM (Information) D RELIGION D MISC (Miscellaneous) D ALERT (Emergency message) With the program type displayed, push the “SEEK/TRACK” or “SCAN” button. You can seek or scan for the station broad casting the same type of program.


168


’06Camry_U (L/O 0507)


Audio remote controls (steering switches)


XM satellite radio∗— When you push the “Ɲ” or “Ɯ” side of the “TYPE” button while receiving a XM channel, the current channel category ap- pears on the display. When the channel category appears, push either “Ɲ” or “Ɯ” side of the “TYPE” but- ton to switch to the next or previous cate- gory. ∗: Use of satellite radio requires XM tuner and service. Contact your Toyota deal- er for details.


Type A


Type B


2006 CAMRY from July ‘05 Prod. (OM33708U)


Some parts of the audio system can be adjusted using the switches on the steer- ing wheel. Details of the specific switches, controls, and features are described below. 1. Volume control switch 2. “ƜƝ” switch 3. “MODE” switch


’06Camry_U (L/O 0507)


to


increase while


1. Volume control switch Push “+” side to increase the volume. The volume continues the switch is being pushed. Push “−” side to decrease the volume. The volume continues to decrease while the switch is being pushed. 2. “Ɲ Ɯ” switch Radio This switch has the following features— To select a preset station: Quickly push and release the “Ɯ” or “Ɲ” side of the switch. Do this again to select the next preset station. To seek a station: Push and hold the “Ɯ” or “Ɲ” side of the switch until you hear a beep. Do this again to find the next station. If you push the switch on either side during the seek mode, seeking will be cancelled. To step up or down the frequency, push and hold the switch even after you hear a beep. When you release the switch, the radio will begin seeking up or down for a station. Do the next station.


this again


to find


XM satellite radio∗— To select a preset channel, push the “Ɯ” or “Ɲ” side of the switch. Repeat until a desired channel is found. ∗: Use of satellite radio requires XM tuner and service. Contact your Toyota deal- er for details. Cassette player This switch has the following features— To skip up or down to a different track in either direction: Quickly push and release the “Ɯ” or “Ɲ” side of the switch. You can select up to nine recordings (in- cluding current one). A blank space of at least 3 seconds is considered to be a start of a recording. When the beginning of a tape is reached, the player automatically resumes play. When the end of the tape is reached, the player automatically reverses sides and resumes normal play. In addition, the feature may not work well with some spoken word, live, or classical recordings.


169


2006 CAMRY from July ‘05 Prod. (OM33708U)


To fast−forward or reverse: Push and hold the “Ɯ” side of the switch to fast−forward a cassette tape. “FF” will appear on the display. Push and hold the “Ɲ” side of the switch to rewind a tape. “REW” will appear on the display. To stop the tape while it is fast−forward- ing, push the “Ɯ” side of the switch. To stop the tape while it is rewinding, push the “Ɲ” side of the switch. If a tape rewinds completely, the cassette player will stop and then play that same side. If a tape fast−forwards completely, the cassette will play the other side of the tape using the auto−reverse feature. Compact disc player Use this switch to skip up or down to a different track in either direction. Quickly push and release the “Ɯ” or “Ɲ” side of the switch until the track you want to listen to is set. If you want to return to the beginning of the current track, push the “Ɲ” side of the switch once, quickly. With compact disc changer only— Push and hold the “Ɯ” or “Ɲ” side of the switch until the disc you want to listen to is set.


170


’06Camry_U (L/O 0507)


3. “MODE” switch Push “MODE” switch to select an audio mode. Each push changes the mode se- quentially if the desired mode is ready to use. To turn the audio system on, push the “MODE” switch. To turn the audio system off, push and hold the “MODE” switch until the system turns off.


Audio system operating hints


NOTICE


To ensure correct audio system op- erations: z Be careful not to spill beverages


over the audio system.


z Do not put anything other than a cassette tape or Compact Disc into the slot.


z The use of a cellular phone inside or near the vehicle may cause a noise from the speakers of the au- dio system which you are listening to. However, this does not indicate a malfunction.


RADIO RECEPTION Usually, a problem with radio reception does not mean there is a problem with your radio—it is just the normal result of conditions outside the vehicle. For example, nearby buildings and terrain can interfere with FM reception. Power lines or telephone wires can interfere with AM signals. And of course, radio signals have a limited range. The farther you are from a station, the weaker its signal will be. conditions change constantly as your vehicle moves.


In addition,


reception


2006 CAMRY from July ‘05 Prod. (OM33708U)


signals are


Here are some common reception prob- lems that probably do not indicate a prob- lem with your radio: FM Fading and drifting stations—Generally, the effective range of FM is about 40 km (25
miles). Once outside this range, you may notice fading and drifting, which increase with the distance from the radio transmit- ter. They are often accompanied by distor- tion. Multi−path—FM reflective, making it possible for two signals to reach your antenna at the same time. If this happens, the signals will cancel each oth- er out, causing a momentary flutter or loss of reception. Static and fluttering—These occur when signals are blocked by buildings, trees, or other large objects. Increasing the bass level may reduce static and fluttering. the FM signal you Station swapping—If are interrupted or weak- is ened, and there is another strong station nearby on the FM band, your radio may tune in the second station until the origi- nal signal can be picked up again.


listening to


’06Camry_U (L/O 0507)


they can


AM Fading—AM broadcasts are reflected by the upper atmosphere—especially at night. These reflected signals can interfere with those received directly from the radio sta- tion, causing the radio station to sound alternately strong and weak. Station interference—When a reflected sig- nal and a signal received directly from a radio station are very nearly the same frequency, interfere with each other, making it difficult to hear the broad- cast. Static—AM is easily affected by external sources of electrical noise, such as high tension power lines, lightening, or electri- cal motors. This results in static. XM∗ Alternation or modifications carried out without appropriate authorization may in- validate to operate the equipment. ∗: Use of satellite radio requires XM tuner and service. Contact your Toyota deal- er for details.


the user’s right


NOTICE


This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These lim- its are designed to provide reasonable protection against harmful interfer- ence in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with instructions, may cause harmful interference to radio commu- nications. However, there is no guar- antee that interference will not occur in a particular installation.


the


171


2006 CAMRY from July ‘05 Prod. (OM33708U)


If this equipment does cause harmful interference to radio or television re- ception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an out- let on a circuit different from that to which the receiver is connected. —Consult enced radio/TV technician for help.


the dealer or an experi-


172


’06Camry_U (L/O 0507)


CARING FOR YOUR CASSETTE PLAYER AND TAPES For the best performance for your cas- sette player and tapes: Clean the tape head and other parts regu- larly. D A dirty


tape head or tape path can decrease sound quality and tangle your cassette to clean them is by using a cleaning tape. (A wet type is recommended.)


tapes. The easiest way


D Store cassettes in their cases and out


of direct sunlight.


D Avoid using cassettes with a total play- ing time longer than 100 minutes (50
minutes per side). The tape used in these cassettes is thin and could get stuck or tangled in the cassette player.


Use high−quality cassettes. D Low−quality cassette tapes can cause many problems, including poor sound, inconsistent and constant auto−reversing. They can also get stuck or tangled in the cassette player.


playing


speed,


D Do not use a cassette if it has been damaged or tangled or if its label is peeling off.


D Do not leave a cassette in the player if you are not listening to it, especially if it is hot outside.


2006 CAMRY from July ‘05 Prod. (OM33708U)


’06Camry_U (L/O 0507)


CARING FOR YOUR COMPACT DISC PLAYER AND DISCS D Your compact disc player is intended for use with 12 cm (4.7 in.) discs only. D Extremely high temperatures can keep your compact disc player from working. On hot days, use the air conditioning to cool the vehicle interior before you listen to a disc.


D Bumpy roads or other vibrations may


make your compact disc player skip.


D If moisture gets into your compact disc player, you may not hear any sound even though your compact disc player appears the disc from the player and wait until it dries.


to be working. Remove


CAUTION


Compact disc players use an invisible laser beam which could cause hazard- ous if directed outside the unit. Be sure to operate the player correctly.


radiation exposure


Special shaped discs


D Use only compact discs marked as shown above. The following products may not be playable on your compact disc player. Copy−protected CD CD−R (CD−Recordable) CD−RW (CD−Re−writable) CD−ROM


Transparent/translucent discs


173


2006 CAMRY from July ‘05 Prod. (OM33708U)


’06Camry_U (L/O 0507)


NOTICE


Do not use special shaped, transpar- ent/translucent, low quality or labeled discs such as those shown in the il- lustrations. The use of such discs may damage the player or changer, or it may be the disc.


impossible


to eject


Low quality discs


Labeled discs


174


Correct


Wrong


inserting


D Handle compact discs carefully, espe- them. cially when you are them on the edge and do not Hold them. Avoid getting fingerprints bend on them, particularly on the shiny side. D Dirt, scratches, warping, pin holes, or other disc damage could cause the player to skip or to repeat a section of a track. (To see a pin hole, hold the disc up to the light.)


D Remove discs from the compact disc player when you are not listening to them. Store them in their plastic cases away from moisture, heat, and direct sunlight.


2006 CAMRY from July ‘05 Prod. (OM33708U)


’06Camry_U (L/O 0507)


To clean a compact disc: Wipe it with a soft, lint−free cloth that has been damp- ened with water. Wipe in a straight line from the center to the edge of the disc (not in circles). Dry it with another soft, lint−free cloth. Do not use a conventional record cleaner or anti−static device.


175


2006 CAMRY from July ‘05 Prod. (OM33708U)


’06Camry_U (L/O 0507)


176


2006 CAMRY from July ‘05 Prod. (OM33708U)


’06Camry_U (L/O 0507)


SECTION 1− 9


OPERATION OF INSTRUMENTS AND CONTROLS Air conditioning system Manual air conditioning system


Controls Air flow selector settings Operating tips


. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .


178
181
181


Automatic air conditioning system


Controls Air flow selector settings Operating tips


. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .


Side and rear vents Air conditioning filter


184
188
188
191
192


177


2006 CAMRY from July ‘05 Prod. (OM33708U)


Manual air conditioning system— —Controls


’06Camry_U (L/O 0507)


1. Fan speed selector 2. Temperature selector 3. Air flow selector 4. “A/C” button 5. Air intake selector


178


2006 CAMRY from July ‘05 Prod. (OM33708U)


Fan speed selector Turn the knob to adjust the fan speed—to the right to increase, to the left to de- crease. Temperature selector Turn the knob to adjust the temperature— to the right to warm, to the left to cool.


’06Camry_U (L/O 0507)


If you want to return the setting to RECIRCULATE mode, press the air in- take selector button once again. Press the “A/C” button for dehumidified heating or cooling. This setting clears the front view more quickly.


5. Windshield—Air flows mainly from the


Air flow selector Turn the knob to select the vents used for air flow. 1. Panel—Air


flows mainly


from


the


instrument panel vents.


2. Bi−level—Air flows from both the floor vents and the instrument panel vents. 3. Floor—Air flows mainly from the floor


vents.


the


4. Floor/Windshield—Air


flows mainly floor vents and windshield


from vents. This position allows the air intake to select FRESH automatically. This is to clean up the front view more quickly.


to


flow selector


windshield vents. Turning the the air windshield position turns on the defog- ging function with the purpose of clear- ing the front view. In this position, the air intake selector mode changes to FRESH automatically to clean up the front view quickly. It is not possible to return to RECIRCULATE in this position. Press the “A/C” button for dehumidified heating or cooling. This setting clears the front view more quickly.


For details about air flow selector settings, see flow selector settings” de- scribed below.


“—Air


179


2006 CAMRY from July ‘05 Prod. (OM33708U)


’06Camry_U (L/O 0507)


“A/C” button To turn on the air conditioning, press the “A/C” button. The “A/C” button indicator will come on. To turn the air conditioning off, press the button again. If the “A/C” button indicator flashes, there is a problem in the air conditioning system and the air conditioning automatically shuts off. If this happens, take your ve- hicle to a Toyota dealer for service.


Air intake selector Press the button to select the air source. 1. RECIRCULATE (indicator light is on)— Recirculates the air inside the vehicle. is off)—Draws


2. FRESH (indicator light


outside air into the system.


To prevent fogging up of the windshield, the air intake mode may change automati- cally to FRESH depending on the condi- tion of the air conditioning system.


180


2006 CAMRY from July ‘05 Prod. (OM33708U)


—Air flow selector settings


’06Camry_U (L/O 0507)


—Operating tips D To cool off your Toyota after


it has been parked in the hot sun, drive with the windows open for a few minutes. This vents the hot air, allowing the air conditioning to cool the interior more quickly.


D Make sure the air intake grilles in front of the windshield are not blocked (by leaves or snow, for example).


D On humid days, do not blow cold air on the windshield. The windshield could fog up because of the difference in air temperature on the inside and outside of the windshield.


D Keep the area under the front seats clear to allow air to circulate through- out the vehicle.


for a minute


D On cold days, set the fan speed to high the intake ducts of snow or moisture. This can reduce the amount of fogging on the windows.


to help clear


: With rear vents


D When driving on dusty roads, close all windows. If dust thrown up by the ve- hicle is still drawn into the vehicle after closing the windows, it is recommended that the air intake selector be set to FRESH and the fan speed selector to any setting except “OFF”.


181


2006 CAMRY from July ‘05 Prod. (OM33708U)


’06Camry_U (L/O 0507)


D If following another vehicle on a dusty road, or driving in windy and dusty conditions, it is recommended that the air intake selector be temporarily set to RECIRCULATE, which will close off the outside passage and prevent outside air and dust from entering the vehicle interior.


Heating For best results, set controls as follows:


Fan speed—Any setting except “OFF” Temperature—Towards WARM


(red zone)


Air intake—FRESH (outside air) Air flow—FLOOR Air conditioning—OFF


D For quick heating, change the air in- take selector mode to RECIRCULATE. To keep the windows from fogging, re- turn to FRESH mode after the vehicle interior has been warmed.


D Press the “A/C” button on for dehumidi-


fied heating.


D Turn the air flow selector to the floor/ windshield position to heat the vehicle interior while defrosting or defogging the windshield. Air conditioning For best results, set controls as follows:


Fan speed—Any setting except “OFF” Temperature—Towards COLD


(blue zone)


Air intake—FRESH (outside air) Air flow—PANEL Air conditioning—ON


D For quick cooling, turn the temperature selector knob fully towards COLD and change the air intake selector mode to RECIRCULATE.


182


2006 CAMRY from July ‘05 Prod. (OM33708U)


Ventilation For best results, set controls as follows:


Fan speed—Any setting except “OFF” Temperature—Towards COLD


(blue zone)


Air intake—FRESH (outside air) Air flow—PANEL Air conditioning—OFF


’06Camry_U (L/O 0507)


Defogging The inside of the windshield For best results, set controls as follows:


Defrosting The outside of the windshield For best results, set controls as follows:


Fan speed—Any setting except “OFF” Temperature—Towards WARM


Fan speed—Any setting except “OFF” Temperature—Towards WARM


(red zone) to heat; COLD (blue zone) to cool


Air intake—FRESH (outside air) Air flow—WINDSHIELD


turns on


Turning the air flow selector to the wind- shield position the defogging function with the purpose of clearing the front view. When turning the air flow selector to the windshield position, the air intake selector mode changes to FRESH automatically to clean up the front view quickly. It is not possible in this position. Press for dehumidified heating or cooling. This setting clears the front view more quickly. D On humid days, do not blow cold air on the windshield—the difference be- tween the outside and inside tempera- tures could make the fogging worse.


to RECIRCULATE


the “A/C” button


to return


(red zone)


Air intake—FRESH (outside air) Air flow—WINDSHIELD


turns on


Turning the air flow selector to the wind- shield position the defrosting function with the purpose of clearing the front view. When turning the air flow selector to the windshield position, the air intake selector mode changes to FRESH automatically to clean up the front view quickly. It is not possible in this position. Press for dehumidified heating. This setting clears the front view more quickly. D To heat the vehicle interior while de- choose


to RECIRCULATE


the “A/C” button


windshield,


to return


frosting floor/windshield air flow.


the


183


2006 CAMRY from July ‘05 Prod. (OM33708U)


Automatic air conditioning system— —Controls


’06Camry_U (L/O 0507)


1. Temperature selector 2. Air flow selector 3. Windshield air flow button 4. Fan speed selector 5. Air intake selector 6. “A/C” button 7. “OFF” button 8. “AUTO” button


184


2006 CAMRY from July ‘05 Prod. (OM33708U)


“AUTO” button For automatic operation of the air condi- tioning, press the “AUTO” button. “AUTO” will appear on the display to show that the automatic operation mode has been selected. In the automatic operation mode, the air conditioning selects the most suitable fan speed, air flow, air intake and on−off of the air conditioning according to the tem- perature. When you press the “AUTO” button with the air intake mode at FRESH, internal circulation may be applied for maximum cooling. You may use manual controls if you want to select your own settings. Fan speed selector Push the “Ɯ” (increase) or “Ɲ” (decrease) side of the button to adjust the fan speed. In automatic operation, you do not have to adjust the fan speed unless you desire another fan speed mode.


’06Camry_U (L/O 0507)


the


increase


temperature, press


Temperature selector To the “Ɯ” side, to decrease it, press the “Ɲ” side. “MAX. COLD” appears when you adjust to maximum cooling, and “MAX. HOT” when you adjust to maximum warming. “OFF” button Push the button to turn off the air condi- tioning system.


Air flow selector Push the buttons to select the vents used for air flow. In automatic operation, you do not have to select the air flow unless you desire another air flow mode. 1. Panel—Air


flows mainly


from


the


instrument panel vents.


2. Bi−level—Air flows from both the floor vents and the instrument panel vents. 3. Floor—Air flows mainly from the floor


vents.


185


2006 CAMRY from July ‘05 Prod. (OM33708U)


4. Floor/Windshield—Air


the


flows mainly floor vents and windshield


from vents. This position allows the air intake to select FRESH automatically. This is to clean up the front view more quickly. If you want to return the setting to RECIRCULATE mode, press the air in- take selector button once again. Press the “A/C” button for dehumidified heating or cooling. This setting clears the front view more quickly.


186


’06Camry_U (L/O 0507)


is pressed, air


this button from


this button once again returns


Windshield air flow button flows When the windshield vents and mainly turns on the defogging function with the purpose of clearing the front view. Pressing the air flow mode to the last one used. This button allows the air intake to select FRESH automatically. This is to clean up the front view more quickly. It is not pos- sible to return to RECIRCULATE in this mode. Press for dehumidified heating or cooling. This setting clears the front view more quickly. For details about air flow selector settings, see flow selector settings” de- scribed below.


the “A/C” button


“—Air


Air intake selector Press the button to select the air source. 1. RECIRCULATE—Recirculates the air in-


side the vehicle.


2. FRESH—Draws outside air


into


the


system.


To prevent fogging up of the windshield, the air intake mode may change automati- cally to FRESH depending on the condi- tion of the air conditioning system.


2006 CAMRY from July ‘05 Prod. (OM33708U)


’06Camry_U (L/O 0507)


“A/C” button To turn on the air conditioning, press the “A/C” button. The “A/C” button indicator will come on. To turn the air conditioning off, press the button again. If the “A/C” button indicator flashes, there is a problem in the air conditioning system and the air conditioning automatically shuts off. If this happens, take your ve- hicle to a Toyota dealer for service.


187


2006 CAMRY from July ‘05 Prod. (OM33708U)


—Air flow selector settings


’06Camry_U (L/O 0507)


—Operating tips D To cool off your Toyota after


it has been parked in the hot sun, drive with the windows open for a few minutes. This vents the hot air, allowing the air conditioning to cool the interior more quickly.


D Make sure the air intake grilles in front of the windshield are not blocked (by leaves or snow, for example).


D On humid days, do not blow cold air on the windshield. The windshield could fog up because of the difference in air temperature on the inside and outside of the windshield.


D Keep the area under the front seats clear to allow air to circulate through- out the vehicle.


for a minute


D On cold days, set the fan speed to high the intake ducts of snow or moisture. This can reduce the amount of fogging on the windows.


to help clear


: With rear vents


188


D When driving on dusty roads, close all windows. If dust thrown up by the ve- hicle is still drawn into the vehicle after closing the windows, it is recommended that the air intake selector be set to FRESH and the fan speed selector to any setting except “OFF”.


2006 CAMRY from July ‘05 Prod. (OM33708U)


’06Camry_U (L/O 0507)


D If following another vehicle on a dusty road, or driving in windy and dusty conditions, it is recommended that the air intake selector be temporarily set to RECIRCULATE, which will close off the outside passage and prevent outside air and dust from entering the vehicle interior.


Heating For best results, set controls as follows: For automatic operation—


Air conditioning For best results, set controls as follows: For automatic operation—


Press in the “AUTO” button. Temperature—To the desired


temperature


Air intake—FRESH (outside air) Air conditioning—OFF


Press in the “AUTO” button. Temperature—To the desired


temperature


Air intake—FRESH (outside air) Air conditioning—ON


For manual operation—


For manual operation—


Fan speed—To the desired fan speed Temperature—Towards WARM Air intake—FRESH (outside air) Air flow—FLOOR Air conditioning—OFF


Fan speed—To the desired fan speed Temperature—Towards COLD Air intake—FRESH (outside air) Air flow—PANEL Air conditioning—ON


for a


few minutes. To keep


D For quick heating, select recirculated air the windows from fogging, select fresh af- ter the vehicle interior has been war- med.


D Press the “A/C” button on for dehumidi-


fied heating.


D Choose floor/windshield air flow to heat the vehicle interior while defrosting or defogging the windshield.


D For quick cooling, select recirculated


air for a few minutes.


189


2006 CAMRY from July ‘05 Prod. (OM33708U)


’06Camry_U (L/O 0507)


Ventilation For best results, set controls as follows: For automatic operation—


Press in the “AUTO” button. Temperature—Towards low temperature Air intake—FRESH (outside air) Air conditioning—OFF


For manual operation—


Fan speed—To the desired fan speed Temperature—Towards COLD Air intake—FRESH (outside air) Air flow—PANEL Air conditioning—OFF


190


Defogging and defrosting —The inside of the windshield For best results, set controls as follows: —For automatic operation


Temperature—Towards high temperature to heat; low temperature to cool


Air intake—FRESH (outside air) Air flow—WINDSHIELD


—For manual operation


Fan speed—To the desired fan speed Temperature—Towards high temperature to heat; low temperature to cool


Air intake—FRESH (outside air) Air flow—WINDSHIELD


the windshield air


Pressing flow button turns on the defogging function with the purpose of clearing the front view. When pressing the windshield air flow but- ton, the air intake selects FRESH auto- matically. This is to clean up the front view more quickly. It is not possible to return to RECIRCULATE in this mode.


the “A/C” button


Press for dehumidified heating or cooling. This setting clears the front view more quickly. D On humid days, do not blow cold air on the windshield—the difference be- tween the outside and inside tempera- tures could make the fogging worse.


—The outside of the windshield For best results, set controls as follows: —For automatic operation


Temperature—Towards high temperature Air intake—FRESH (outside air) Air flow—WINDSHIELD


—For manual operation


Fan speed—To the desired fan speed Temperature—Towards high temperature Air intake—FRESH (outside air) Air flow—WINDSHIELD


the windshield air


flow button Pressing turns on the defrosting function with the purpose of clearing the front view. When pressing the windshield air flow but- ton, the air intake selects FRESH auto- matically. This is to clean up the front view more quickly. It is not possible to return to RECIRCULATE in this mode.


2006 CAMRY from July ‘05 Prod. (OM33708U)


the “A/C” button


Press for dehumidified heating or cooling. This setting clears the front view more quickly. D To heat the vehicle interior while de- choose


windshield,


frosting floor/windshield air flow.


the


’06Camry_U (L/O 0507)


Side and rear vents


If air flow control is not satisfactory, check the side and rear vents. The side and rear vents may be opened or closed as shown.


Side vents


Rear vents


191


2006 CAMRY from July ‘05 Prod. (OM33708U)


’06Camry_U (L/O 0507)


Air conditioning filter—


The air conditioning filter information label is placed inside of the glove box as shown and indicates that a filter has been installed. The air conditioning filter prevents dust from entering the vehicle through the air conditioning vent.


The air conditioning filter is behind the glove box.


—Checking and replacing the air conditioning filter The air conditioning filter may clog af- ter long use. The filter may need to be replaced if the air flow of the air condi- tioning and heater experiences extreme reductions in operating efficiency, or if the windows begin to fog up easily in FRESH mode. To maintain the air conditioning efficiency, inspect and replace the air conditioning filter according to the maintenance sched- ule. In dusty areas or areas with heavy traffic flow, such as inner city or desert areas, early replacement may be required. (For scheduled maintenance information, please refer the “Scheduled Mainte- nance Guide” or “Owner’s Manual Supple- ment”.)


to


192


2006 CAMRY from July ‘05 Prod. (OM33708U)


1. Open


the glove box. Remove


the screw with a Phillips−head screw- driver and slide the hook as shown.


’06Camry_U (L/O 0507)


2. Push in each side of the glove box


to disconnect the claws.


3. Remove the filter case from the filter


outlet as shown in the illustration.


193


2006 CAMRY from July ‘05 Prod. (OM33708U)


’06Camry_U (L/O 0507)


4. Remove


case.


the


filter


from


the


filter


When installing the filter in the filter case, keep the “°UP” mark pointing up.


5. Inspect the filter on the surface. If it is the just moderately dusty, it may be cleaned by blowing compressed air from the reverse surface. Do not wash or oil the filter. If it is dirty, it should be replaced.


INFORMATION


The air filter should be installed prop- erly in position. The use of air condi- tioning with filter removed may cause deteriorated dustproof per- formance and then affect air condi- tioning performance.


the air


194


2006 CAMRY from July ‘05 Prod. (OM33708U)


’06Camry_U (L/O 0507)


SECTION 1− 10


OPERATION OF INSTRUMENTS AND CONTROLS Other equipment Clock Outside temperature display Multi−information display Compass Cigarette lighter and ashtrays Power outlets Garage door opener Glove box Auxiliary boxes Rear console box Front cup holder Rear cup holder Storage box Grocery bag hooks Cargo net Rear sun shade Floor mat


. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .


196
196
197
199
205
206
207
211
211
213
214
214
215
215
216
216
216


195


2006 CAMRY from July ‘05 Prod. (OM33708U)


’06Camry_U (L/O 0507)


Clock


Outside temperature display


temperature


Without multi−information display—To se- lect “_C” or “_F”, push the “E/M” button. ranges The displayed from −30_C (−22_F) up to 50_C (122_F). The key must be in the “ON” position. If an abnormality exists in the connection of the outside air temperature sensor, “−−” will appear on the display. If “−−” appears on the display, contact your Toyota dealer. There may be a case that “−−” appears momentarily when the ignition is quickly turned to “ON”. It is normal if it goes out soon.


With multi−information display


To reset the hour: Push the “H” button. To reset the minutes: Push the “M” button. The key must be in the “ACC” or “ON” position. If the electrical power source has been disconnected from the clock, the time dis- play will automatically be set to 1:00 (one o’clock). When lights are turned on, the brightness of the time indi- cator will be reduced.


instrument panel


the


196


Without multi−information display


2006 CAMRY from July ‘05 Prod. (OM33708U)


’06Camry_U (L/O 0507)


Multi−information display


The following information is displayed on the clock/outside temperature dis- play when you push the “INFO” button with the ignition switch turned on. Each time you push the “MODE/RESET” button, the display toggles through this information. 1. Instantaneous fuel consumption 2. Average fuel consumption 3. Driving range 4. Average vehicle speed 5. Driving time The displayed values in the multi−informa- tion display indicate general driving condi- tions. Accuracy varies with driving habits and road conditions. Push the “INFO” button once again, the display will return to the clock and outside temperature gauge. When the ignition switch is on, the last previously used mode displayed just be- fore the ignition switch is off will appear.


197


2006 CAMRY from July ‘05 Prod. (OM33708U)


from

Loading...
x