ment”.
202
D Keep
the
trunk
lid closed while driving. An open or unsealed trunk lid may cause exhaust gases to be drawn into the vehicle.
D To allow proper operation of your vehicle’s ventilation system, keep the inlet grilles in front of the wind- shield clear of snow, leaves, or oth- er obstructions.
D If you smell exhaust fumes in the vehicle, drive with the windows open and the trunk lid closed. Have the cause immediately located and corrected.
2004 CAMRY from Jul. ’03 Prod. (OM33616U)
Facts about engine oil consumption FUNCTIONS OF ENGINE OIL Engine oil has the primary functions of lubricating and cooling the inside of the engine, and plays a major role in main- taining the engine in proper working order. ENGINE OIL CONSUMPTION It is normal that an engine should con- sume some engine oil during normal engine operation. The causes of oil consumption in a normal engine are as follows. D Oil is used to lubricate pistons, piston rings and cylinders. A thin film of oil is left on the cylinder wall when a pis- ton moves downwards in the cylinder. High negative pressure generated when the vehicle is decelerating sucks some of this oil into the combustion chamber. This oil as well as some part of the oil film left on the cylinder wall is burned by temperature combustion gases during the combustion process. D Oil is also used to lubricate the stems of the intake valves. Some of this oil is sucked into the combustion chamber together with is burned along with the fuel. High tem- perature exhaust gases also burn the oil used to lubricate the exhaust valve stems.
intake air and
the high
the
’04Camry_U (L/O 0307)
The amount of engine oil consumed de-
pends on the viscosity of the oil, the
quality of the oil and the conditions the
vehicle is driven under.
More oil is consumed by high−speed driv-
ing and frequent acceleration and decel-
eration.
A new engine consumes more oil, since
its pistons, piston rings and cylinder walls
have not become conditioned.
Oil consumption: Max. 1.0 L per 1000
km (1.1 qt./600 miles, 0.9
lmp. qt./600
miles)
When judging the amount of oil con-
sumption, note that the oil may become
diluted and make it difficult to judge
the true level accurately.
As an example, if a vehicle is used for
repeated short trips, and consumes a nor-
mal amount of oil, the dipstick may not
show any drop in the oil level at all, even
after 1000 km (600 miles) or more. This
is because the oil is gradually becoming
diluted with fuel or moisture, making it
appear that the oil level has not changed.
The diluting
ingredients evaporate out
when the vehicle is then driven at high
speeds, as on an express way, making it
appear that oil is excessively consumed
after driving at high speeds.
IMPORTANCE OF ENGINE OIL LEVEL CHECK One of the most important points in prop- er vehicle maintenance is to keep the en- gine oil at the optimum level so that oil function will not be impaired. Therefore, it is essential that the oil level be checked regularly. Toyota recommends that the oil level be checked every time you refuel the vehicle.
NOTICE
Failure to check the oil level regularly could lead to serious engine trouble due to insufficient oil.
For detailed information on oil level check, see “Checking level” on page 282 in Section 7−2.
the engine oil
203
2004 CAMRY from Jul. ’03 Prod. (OM33616U)
Iridium−tipped spark plugs
Your engine is fitted with iridium−tipped spark plugs.
NOTICE
Use only iridium−tipped spark plugs and do not adjust gaps for your en- gine performance and smooth drive- ability.
204
’04Camry_U (L/O 0307)
Brake system The tandem master cylinder brake system is a hydraulic system with two separate sub−systems. If either sub−system should fail, the other will still work. However, the pedal will be harder to press, and your stopping distance will increase. Also, the brake system warning light may come on.
CAUTION
Do not drive your vehicle with only a single brake system. Have your brakes fixed immediately.
CAUTION
D Do not pump the brake pedal if the engine stalls. Each push on the pedal uses up your reserved vacu- um.
lost,
D Even if the power assist
is com- pletely the brakes will still work. But you will have to push the pedal hard, much harder than nor- mal. And your braking distance will increase.
the brakes.
BRAKE BOOSTER The brake booster uses engine vacuum to power−assist the engine should quit while you are driving, you can bring the vehicle to a stop with normal pedal pressure. There is enough reserved vacuum two stops—but no more!
for one or
If
2004 CAMRY from Jul. ’03 Prod. (OM33616U)
(with
ANTI−LOCK BRAKE SYSTEM “ABS” warning light) The anti−lock brake system is designed to help prevent lock−up of the wheels during a sudden braking or braking on slippery road surfaces. This assists in providing directional stability and steer- ing performance of the vehicle under these circumstances.
this situation,
Effective way to press the ABS brake pedal: When the anti−lock brake system function is in action, you may feel the brake pedal pulsating and hear a noise. In the anti−lock brake system work for you, just hold the brake pedal down more firmly. Do not pump the brake in a panic stop. This will reduced braking perfor- mance.
result
let
to
in
The anti−lock brake system becomes op-
erative after the vehicle has accelerated
to a speed in excess of approximately 10
km/h (6 mph). It stops operating when the
vehicle decelerates
to a speed below
approximately 5 km/h (3 mph).
’04Camry_U (L/O 0307)
CAUTION
Do not overestimate the anti−lock brake system: Although the anti−lock brake system assists in providing ve- hicle control, it is still important to drive with all due care and maintain a moderate speed and safe distance from the vehicle in front of you, be- cause there are limits to the vehicle stability and effectiveness of steering wheel operation even with the anti− lock brake system on. If tire grip performance exceeds its capability, or if hydroplaning occurs during high speed driving in the rain, the anti−lock brake system does not provide vehicle control.
Depressing the brake pedal on slippery road surfaces such as on a manhole cov- er, a steel plate at a construction site, joints in a bridge, etc. on a rainy day tends to activate the anti−lock brake sys- tem. You may hear a click or motor sound in the engine compartment for a few seconds when the engine is started or just after the vehicle begins to move. This means that the anti−lock brake system is in the self−check mode, and does not indicate a malfunction. When the anti−lock brake system is ac- tivated, the following conditions may occur. They do not indicate a malfunc- tion of the system: D You may hear the anti−lock brake sys- tem operating and feel the brake pedal pulsating and the vibrations of the ve- hicle body and steering wheel. You may also hear the motor sound in the engine compartment even after the ve- hicle is stopped.
D At the end of the anti−lock brake sys- the brake pedal may
tem activation, move a little forward.
205
2004 CAMRY from Jul. ’03 Prod. (OM33616U)
the vehicle
Anti−lock brake system is not de- signed to shorten the stopping dis- tance: Always drive at a moderate speed and maintain a safe distance from front of you. Compared with vehicles without an anti−lock brake system, your vehicle may require a longer stopping dis- tance in the following cases: D Driving on rough, gravel or snow−
in
covered roads.
D Driving with tire chains installed. D Driving over the steps such as the
joints on the road.
D Driving on roads where the road surface is pitted or has other differ- ences in surface height.
Install all 4 tires of specified size at appropriate pressure: The anti−lock brake system detects vehicle speeds using the speed sensors for respec- tive wheels’ turning speeds. The use of tires other than specified may fail to detect the accurate turning speed resulting longer stopping dis- tance.
in a
Type A
Type B
206
’04Camry_U (L/O 0307)
“ABS” warning light (vehicles without vehicle stability control system) The light comes on when the ignition key is turned to the “ON” position. If the anti− lock brake system works properly, the light turns off after a few seconds. There- after, if the system malfunctions, the light comes on again. When the “ABS” warning light is on (and the brake system warning light is off), the anti−lock brake system does not operate, but the brake system still operates con- ventionally. When the “ABS” warning light is on (and the brake system warning light is off), the anti−lock brake system does not operate so that the wheels could lock up during a sudden braking or braking on slippery road surfaces. the following conditions If either of occurs, indicates a malfunction this somewhere in the parts monitored by the warning light. Contact your Toyota dealer as soon as possible to service the vehicle. D The light does not come on when the ignition key is turned to the “ON” posi- tion, or remains on.
D The light comes on while you are driv-
ing.
2004 CAMRY from Jul. ’03 Prod. (OM33616U)
’04Camry_U (L/O 0307)
if
few seconds. Thereafter,
A warning light turning on briefly during operation does not indicate a problem. “ABS” warning light (vehicles with ve- hicle stability control system) The light comes on when the ignition key is turned to the “ON” position. If the anti− lock brake system and the brake assist system work properly, the light turns off after a the system malfunctions, the light comes on again. When the “ABS” warning light is on (and the brake system warning light is off), the anti−lock brake system, the brake assist system, the traction control system and the vehicle stability control system do not operate, but the brake system still oper- ates conventionally. When the “ABS” warning light is on (and the brake system warning light is off), the anti−lock brake system does not operate so that the wheels could lock up during a sudden braking or braking on slippery road surfaces.
If either of the following conditions oc- curs, this indicates a malfunction some- where in the components monitored by the warning light system. Contact your Toyota dealer as soon as possible to service the vehicle. D The light does not come on when the ignition key is turned to the “ON” posi- tion, or remains on.
D The light comes on while you are driv-
ing.
A warning light turning on briefly during operation does not indicate a problem.
CAUTION
If the “ABS” warning light remains on together with the brake system warn- ing light, immediately stop your ve- hicle at a safe place and contact your Toyota dealer. In this case, not only the anti−lock brake system will fail but also the vehicle will become extremely unsta- ble during braking.
the brakes on,
DRUM−IN−DISC TYPE PARKING BRAKE
SYSTEM (on some models)
type
Your vehicle has a drum−in−disc
parking brake system. This type of brake
system needs bedding−down of the brake
shoes periodically or whenever the parking
brake shoes and/or drums are replaced.
Have your Toyota dealer perform the bed-
ding−down.
BRAKE ASSIST SYSTEM (vehicles with
vehicle stability control system)
the
When you slam
brake assist system judges as an emer-
gency stop and provides more powerful
braking for a driver who cannot hold
down the brake pedal firmly.
When you slam the brakes on, more pow-
erful braking will be applied. At this time,
you may hear a sound
the engine
compartment and feel the vibrations of the
brake pedal. This does not indicate a mal-
function.
The brake assist system becomes opera-
tive after the vehicle has accelerated to
a speed in excess of approximately 10
km/h (6 mph). It stops operating when the
vehicle decelerates
to a speed below
approximately 5 km/h (3 mph).
in
207
2004 CAMRY from Jul. ’03 Prod. (OM33616U)
’04Camry_U (L/O 0307)
Brake pad wear limit indicators
Your Toyota’s identification— —Vehicle identification number
For an explanation of this system’s warn- ing light, see “Service reminder indicators and warning buzzers” on page 111 in Sec- tion 1−6.
The brake pad wear limit indicators on your disc brakes give a warning noise when the brake pads are worn to where replacement is required. If you hear a squealing or scraping noise while driving, have the brake pads checked and replaced by your Toyota dealer as soon as possible. Expensive ro- tor damage can result if the pads are not replaced when necessary.
The vehicle identification number (VIN) is the legal identifier for your vehicle. This number is on the left top of the instrument panel, and can be seen through the windshield from outside. This is the primary identification number for your Toyota. It is used in registering the ownership of your vehicle.
208
2004 CAMRY from Jul. ’03 Prod. (OM33616U)
’04Camry_U (L/O 0307)
—Engine number
The engine number is stamped on the engine block as shown.
The vehicle identification number (VIN) is also on the Certification Label.
2AZ−FE engine
1MZ−FE and 3MZ−FE engines
209
2004 CAMRY from Jul. ’03 Prod. (OM33616U)
’04Camry_U (L/O 0307)
Suspension and chassis
CAUTION
Do not modify the suspension/chassis with lift kits, spacers, springs, etc. It can cause dangerous vehicle handling characteristics, resulting loss of control.
in
Theft prevention labels
Your new vehicle carries theft preven-
tion labels which are approximately 56
mm (2.20 in.) by 16 mm (0.63 in.).
The purpose of these labels is to reduce
the incidence of vehicle thefts by facilitat-
ing the tracing and recovery of parts from
stolen vehicles. The label is designed so
that once it is applied to a surface, any
attempt to remove it will result in destroy-
ing the integrity of the label. Transferring
these labels intact from one part to anoth-
er, will be impossible.
NOTICE
You should not attempt to remove the theft prevention labels as it may vio- late certain state or federal laws.
210
2004 CAMRY from Jul. ’03 Prod. (OM33616U)
Tire information— —Tire symbols
’04Camry_U (L/O 0307)
This illustration indicates typical tire symbols. 1. Tire size—For details, see “—Tire
size” on page 213.
2. DOT and Tire
Identification Number (TIN)—For details, see “—DOT and Tire Identification Number (TIN)” on page 212.
tire
quality
3. Uniform
gra- ding—For details, see “Uniform tire quality grading” that follows. 4. The location of the tread wear indicators—For see “Checking and replacing tires” on page 290.
details,
5. Tire ply composition and mate- rials—Plies mean a layer of rub- ber−coated parallel cords. Cords mean the strands forming the plies in the tire.
6. Radial tires or bias−ply tires—A radial tire has “RADIAL” on the sidewall. The tire not marked with “RADIAL” is a bias−ply tire.
211
2004 CAMRY from Jul. ’03 Prod. (OM33616U)
’04Camry_U (L/O 0307)
—DOT and Tire Identification Number (TIN)
The “DOT” symbol certifies that the tire conforms to applicable Federal Motor Vehicle Safety Standards.
This illustration indicates typical DOT and Tire Identification Number (TIN). 1. “DOT” symbol 2. Tire Identification Number (TIN) 3. Tire manufacturer’s identification
mark
4. Tire size code 5. Manufacturer’s optional tire type
code
6. Manufacturing week 7. Manufacturing year
7. “TUBELESS”
or
“TUBE TYPE”—A tubeless tire does not have a tube inside the tire and air is directly filled in the tire. A tube type tire has a tube inside the tire and the tube maintains the air pressure.
8. Load limit at maximum cold tire inflation pressure—For details, see “Checking and replacing tires” on page 290.
9. Maximum cold
tire
tire
cold
inflation pressure—This means the pres- sure to which a tire may be in- flated. For details about recom- mended inflation pressure, see “Tires” on page 312. tire or all season tire—An all season tire has “M+S” on tire not marked with “M+S” is a summer tire. For details, see “Types of tires” on page 222.
the sidewall. The
10.Summer
212
2004 CAMRY from Jul. ’03 Prod. (OM33616U)
’04Camry_U (L/O 0307)
—Tire size
—Name of each section of tire
This illustration indicates typical tire size. 1. Tire use
(P=Passenger car,
T=Temporary use)
2. Section width (in millimeters) 3. Aspect ratio (tire height to section
width)
4. Tire construction code (R=Radial,
D=Diagonal)
5. Wheel diameter (in inch) 6. Load index (2 digits or 3 digits) 7. Speed symbol (alphabet with one
letter)
1. Section width 2. Tire height 3. Wheel diameter
1. Bead 2. Sidewall 3. Shoulder 4. Tread 5. Belt 6. Inner liner 7. Reinforcing rubber 8. Carcass 9. Rim lines 10.Bead wires 11. Chafer
213
2004 CAMRY from Jul. ’03 Prod. (OM33616U)
—Uniform tire quality grading This information has been prepared in accordance with regulations issued by the National Highway Traffic Safe- ty Administration of the U.S. Depart- ment of Transportation. It provides the purchasers and/or prospective purchasers of Toyota vehicles with in- formation on uniform tire quality grad- ing. Your Toyota dealer will help answer any questions you may have as you read this information. DOT quality grades—All passenger vehicle tires must conform to Fed- eral Safety Requirements in addi- tion these grades. Quality grades can be found where appli- cable on the tire sidewall between tread shoulder and maximum sec- tion width. For example: Treadwear 200 Traction AA Temperature A
to
214
’04Camry_U (L/O 0307)
Treadwear—The treadwear grade is a comparative rating based on the wear rate of the tire when tested un- der controlled conditions on a speci- fied government test course. For ex- ample, a tire graded 150 would wear one and a half (1−1/2) times as well on the government course as a tire graded 100. The relative performance of tires depends upon the actual conditions of their use, however, and may depart significantly from the norm due to variations in driving hab- its, service practices and differences in road characteristics and climate.
Traction AA, A, B, C—The traction grades, from highest to lowest, are AA, A, B, and C, and they represent the tire’s ability to stop on wet pave- ment as measured under controlled conditions on specified government test surfaces of asphalt and concrete. A tire marked C may have poor trac- tion performance. Warning: The traction grade assigned to tire is based on braking (straight ahead) traction tests and does not include cornering (turning) traction.
this
2004 CAMRY from Jul. ’03 Prod. (OM33616U)
’04Camry_U (L/O 0307)
Temperature A, B, C—The tempera- ture grades are A (the highest), B, and C, representing the tire’s resis- tance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure. The grade C cor- responds to a level of performance which all passenger car tires must meet under the Federal Motor Vehicle Safety Standard No.109. Grades B and A represent higher levels of per- formance on the laboratory test wheel than the minimum required by law. Warning: The temperature grades for this tire are established for a tire that is properly inflated and not over- loaded. Excessive speed, underinfla- tion, or excessive loading, either sep- arately or in combination, can cause heat buildup and possible tire failure.
215
2004 CAMRY from Jul. ’03 Prod. (OM33616U)
’04Camry_U (L/O 0307)
—Tire related terms
Cold tire inflation pressure
Maximum inflation pressure
Recommended inflation pressure
Accessory weight
Curb weight
Maximum loaded vehicle weight
Normal occupant weight
Tire inflation pressure when the vehicle has been parked at least 3 hours or more, or it has not been driven more than 1.5 km or 1 mile under that condition The maximum cold inflation pressure to which a tire may be inflated and shown on the sidewall of the tire Cold tire inflation pressure recommended by a manufacturer The combined weight (in excess of those standard items which may be replaced) of automatic transmission, power steering, power brakes, power windows, power seats, radio, and heater, to the extent that these items are available as factory−installed equipment (whether installed or not) The weight of a motor vehicle with standard equipment including the maximum capacity of fuel, oil, and coolant, and, if so equipped, air conditioning and additional weight optional engine The sum of— (a) Curb weight; (b) Accessory weight; (c) Vehicle capacity weight; and (d) Production options weight
68 kg (150 lb.) times the number of occupants specified in the second
column of Table 1 on page 218
216
2004 CAMRY from Jul. ’03 Prod. (OM33616U)
’04Camry_U (L/O 0307)
Production options weight
Vehicle capacity weight (Total load capacity)
Intended outboard sidewall
Occupant distribution
Rim
Rim diameter (Wheel diameter) Rim size designation Rim type designation Rim width
Vehicle maximum load on the tire
The combined weight of those installed regular production options weighing over 2.3 kg (5 lb.) in excess of those standard items which they replace, not previously considered in curb weight or accessory weight, including heavy duty brakes, ride levelers, roof rack, heavy duty battery, and special trim The rated cargo and luggage load plus 68 kg (150 lb.) times the vehicle’s designated seating capacity (A) The sidewall that contains a whitewall, bears white lettering or bears
manufacturer, brand, and/or model name molding that is higher or deeper than the same molding on the other sidewall of the tire, or
(B) The outward facing sidewall of an asymmetrical tire that has a particular
side that must always face outward when mounted on a vehicle
Distribution of occupants in a vehicle as specified in the third column of Table 1 that follows A metal support for a tire or a tire and tube assembly upon which the tire beads are seated Nominal diameter of the bead seat Rim diameter and width The industry of manufacturer’s designation for a rim by style or code Nominal distance between rim flanges The load on an individual tire that is determined by distributing to each axle its share of the maximum loaded vehicle weight and dividing by two
217
2004 CAMRY from Jul. ’03 Prod. (OM33616U)
’04Camry_U (L/O 0307)
Vehicle normal load on the tire
Weather side
The load on an individual tire that is determined by distributing to each axle its share of the curb weight, accessory weight, and normal occupant weight (distributed in accordance with Table 1 that follows) and dividing by two The surface area of the rim not covered by the inflated tire
Table 1—Occupant loading and distribution for vehicle normal load for various designated seating capacities
Designated seating capacity,
number of occupants
Vehicle normal load, number of
occupants
Occupant distribution in a normally
loaded vehicle
2 through 4
5 through 10
2 in front 2 in front, 1 in second seat
218
2004 CAMRY from Jul. ’03 Prod. (OM33616U)
’04Camry_U (L/O 0307)
Vehicle load limits Vehicle load limits include total load capacity, seating capacity, towing ca- pacity and cargo capacity. Follow the load limits shown below. Total load capacity:
410 kg (900 lb.) Total load capacity means com- bined weight of occupants, cargo and luggage. Tongue load is in- cluded when trailer towing.
Seating capacity:
Total 5 (Front 2, Rear 3)
Seating capacity means the maxi-
mum number of occupants whose
weight is supposed to be 68 kg (150
lb.) per person. Depending on the
weight of person, the seating ca-
pacity given may exceed the total
load capacity.
NOTICE
Even if the number of occupants are within the seating capacity, do not exceed the total load ca- pacity.
Towing capacity: 907 kg (2000 lb.) Towing capacity means the maxi- mum gross trailer weight (trailer weight plus its cargo weight) that your vehicle is able to tow.
Cargo capacity Cargo capacity may increase or de- crease depending on the size (weight) and the number of occupants. For de- tails, see “Capacity and distribution” that follows.
CAUTION
Do not apply the load more than each load limit. That may cause not only damage to the tires, but also deterioration to the steering ability and braking ability, which may cause an accident.
Cargo and luggage— —Stowage precautions When stowing cargo and luggage in the vehicle, observe the following: D Put cargo and luggage in the trunk when at all possible. Be sure all items are secured in place.
D Be careful to keep the vehicle bal- anced. Locating the weight as far forward as possible helps maintain balance.
D For better fuel economy, do not
carry unneeded weight.
219
2004 CAMRY from Jul. ’03 Prod. (OM33616U)
’04Camry_U (L/O 0307)
D Do not drive with objects left on top of the instrument panel. They may interfere with the driver’s field of view. Or they may move during sharp vehicle acceleration or turning, and im- pair the driver’s control of the vehicle. In an accident they may injure the vehicle occu- pants.
CAUTION
D To prevent cargo and luggage from sliding forward during braking, do not stack anything in the enlarged trunk. Keep car- go and luggage low, as close to the floor as possible.
D Never allow anyone to ride in the enlarged trunk. It is not de- signed for passengers. They should ride in their seats with their seat belts properly fas- tened. Otherwise, they are much more likely to suffer seri- ous bodily injury, in the event of sudden braking or a colli- sion.
D Do not place anything on the package tray behind the rear seatback. Such items may be thrown about and possibly in- jure people in the vehicle dur- ing sudden braking or an acci- dent.
220
FOR
—Capacity and distribution Cargo capacity depends on the to- tal weight of the occupants. (Cargo capacity) = (Total load capac- ity) – (Total weight of occupants) STEPS CORRECT LOAD LIMIT 1. Locate the statement “The com- bined weight of occupants and cargo should never exceed XXX pounds” on your vehicle’s placard. 2. Determine the combined weight of the driver and passengers that will be riding in your vehicle.
DETERMINING
3. Subtract the combined weight of the driver and passengers from XXX kilograms or XXX pounds.
2004 CAMRY from Jul. ’03 Prod. (OM33616U)
’04Camry_U (L/O 0307)
4. The resulting figure equals the
available amount of cargo and lug-
gage load capacity. For example,
if the “XXX” amount equals 1400
lbs. and there will be five 150 lb.
passengers in your vehicle, the
amount of available cargo and lug-
gage load capacity is 650 lbs.
(1400–750 (5x150)=650 lbs).
5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4.
6. If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available car- go and luggage load capacity of your vehicle.
For details about trailer towing, see page 228.
Cargo capacity
Total load capacity
EXAMPLE ON YOUR VEHICLE
In case that 2 people with the com-
bined weight of 166 kg (366 lb.) are
riding in your vehicle with the total
load capacity of 410 kg (900 lb.), the
available amount of cargo and lug-
gage load capacity will be as follows:
410 kg – 166 kg = 244 kg.
(900 lb. – 366 lb. = 534 lb.)
From this condition, if 3 more passen-
gers with the combined weight of 176
kg (388 lb.) get on, the available car-
go and luggage load will be reduced
as follows:
244 kg – 176 kg = 68 kg. (534 lb. – 388 lb. = 146 lb.) As shown in the above example, if the number of occupants increases, the cargo and luggage load equaling the combined weight of occupants who got on later must be reduced. In other words, if the increase in the number of occupants causes the excess of the total load capacity (combined weight of occupants plus cargo and luggage load), you have to reduce the cargo and luggage on your vehicle. For details about total load capacity, see “Vehicle load limits” on page 219.
221
2004 CAMRY from Jul. ’03 Prod. (OM33616U)
CAUTION
Even if the total load of occu- pant’s weight and the cargo load is less than the total load capac- ity, do not apply the load uneven- ly. That may cause not only dam- age to the tire but also deteriora- tion to the steering ability due to unbalance of the vehicle, causing an accident.
’04Camry_U (L/O 0307)
Types of tires Determine what kind of tires your vehicle is originally equipped with. 1. Summer tires Summer tires are high−speed capabil- ity tires best suited to highway driving under dry conditions. Since summer tires do not have the same traction performance as snow tires, summer tires are inadequate for driving on snow−covered or icy roads. For driving on snow−covered or icy roads, we recommend using snow tires. If installing snow tires, be sure to replace all four tires. 2. All season tires All season tires are designed to pro- vide better traction in snow and to be adequate for driving in most winter conditions, as well as for use all year round.
traction
All season tires, however, do not have adequate performance compared with snow tires in heavy or loose snow. Also, all season tires fall short in acceleration and handling performance compared with summer tires in highway driving. The details about how to distinguish summer tires from all season tires are described on page 211.
CAUTION
D Do not mix summer and all sea- son tires on your vehicle as this can cause dangerous han- dling characteristics, resulting in loss of control.
D Do not use tires other than the manufacturer’s designated tires, and never mix tires or wheels of the sizes different from the originally equipped tires and wheels.
222
2004 CAMRY from Jul. ’03 Prod. (OM33616U)
’04Camry_U (L/O 0307)
SECTION 3
STARTING AND DRIVING Starting and driving Before starting the engine How to start the engine Tips for driving in various conditions Winter driving tips Dinghy towing Trailer towing How to save fuel and make your vehicle last longer
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
224
224
225
226
227
228
234
223
2004 CAMRY from Jul. ’03 Prod. (OM33616U)
’04Camry_U (L/O 0307)
How to start the engine— (a) Before cranking 1. Apply the parking brake firmly. 2. Turn off unnecessary lights and acces-
sories.
into neutral. Hold
3. Manual transmission: Press the clutch pedal to the floor and shift the trans- mission the clutch pedal to the floor until the engine is started. A starter safety device will pre- vent the starter from operating if the clutch pedal is not fully depressed. Automatic transmission: Put the se- lector lever in “P”. If you need to re- start the engine while the vehicle is moving, put the selector lever in “N”. A starter safety device will prevent the starter the selector lever is in any drive position.
from operating if
4. Automatic
transmission only: De- press the brake pedal and hold it to the floor until driving off.
Before starting the engine 1. Check the area around the vehicle be-
fore entering it.
2. Adjust seat position, seatback angle, restraint
seat cushion height, head height and steering wheel angle.
3. Vehicles with the power adjustable ped- als—Adjust the position of the acceler- ator and brake pedals.
4. Adjust the inside and outside rear view
mirrors.
5. Lock all doors. 6. Fasten seat belts.
224
(b) Starting the engine Before starting the engine, be sure to fol- low the instructions in “(a) Before crank- ing”. Normal starting procedure The multiport fuel injection system/sequen- tial multiport fuel injection system in your engine automatically controls the proper air−fuel mixture for starting. You can start a cold or hot engine as follows: With your foot off the accelerator pedal, crank the engine by turning the key to “START”. Release the engine starts. Engine should be warmed up by driving, not in idle. For warming up, drive with smoothly turning engine until engine cool- ant temperature is within normal range. If the engine stalls... Simply restart it, using the correct proce- dure given in normal starting. If the engine will not start... See “If your vehicle will not start” on page 238 in Section 4.
it when
2004 CAMRY from Jul. ’03 Prod. (OM33616U)
’04Camry_U (L/O 0307)
NOTICE
z Do not crank for more than 30 se- conds at a time. This may overheat the starter and wiring systems.
z Do not race a cold engine. z If the engine becomes difficult to start or stalls frequently, have the engine checked immediately.
Tips for driving in various conditions D Always slow down in gusty crosswinds. This will allow you much better control. D Drive slowly onto curbs and, if pos- sible, at a right angle. Avoid driving onto high, sharp−edged objects and other road hazards. Failure to do so can lead to severe tire damage such as a tire burst. Drive slowly when passing over bumps or travelling on a bumpy road. Other- wise, the impact could cause severe damage to the tires and/or wheels.
they
D When parking on a hill, turn the front wheels until touch the curb so that the vehicle will not roll. Apply the parking brake, and place the transmis- sion in “P” (automatic) or in first or reverse (manual). If necessary, block the wheels.
D Washing your vehicle or driving through deep water may get the brakes wet. To see whether they are wet, check that there is no traffic near you, and then press the pedal lightly. If you do not feel a normal braking force, the brakes are probably wet. To dry them, drive the vehicle cautiously while lightly pressing the brake pedal with the park- ing brake applied. If they still do not work safely, pull to the side of the road and call a Toyota dealer for assistance.
CAUTION
D Before driving off, make sure that the parking brake is fully released and reminder light is off.
the parking brake
D Do not
leave your vehicle unat- tended while the engine is running. D Do not rest your foot on the brake pedal while driving. It can cause dangerous overheating, needless wear, and poor fuel economy.
D To drive down a long or steep hill, reduce your speed and downshift. Remember, if you ride the brakes excessively, they may overheat and not work properly.
225
2004 CAMRY from Jul. ’03 Prod. (OM33616U)
D Be careful when accelerating, up- shifting, downshifting or braking on a slippery surface. Sudden accelera- tion or engine braking could cause the vehicle to spin or skid.
tire dealer
D Do not drive in excess of the speed
limit. Even if the legal speed limit
permits it, do not drive over 140
km/h (85 mph) unless your vehicle
has high−speed capability
tires.
Driving over 140 km/h (85 mph) may
result in tire failure, loss of control
and possible injury. Be sure to con-
sult a
to determine
whether the tires on your vehicle
are high−speed capability tires or
not before driving at such speeds.
D Do not continue normal driving
when the brakes are wet. If they are
require a
wet, your vehicle will
longer stopping distance, and
it
may pull
the
brakes are applied. Also, the park-
ing brake will not hold the vehicle
securely.
to one side when
226
’04Camry_U (L/O 0307)
Winter driving tips Make sure your coolant is properly pro- tected against freezing. Only use “Toyota Super Long Life Coolant” or similar high quality ethylene glycol based non−silicate, non−amine, non−nitrite, and non−borate coolant with long−life hy- brid organic acid technology. See “Checking the engine coolant level” on page 284 in Section 7−2 for details of coolant type selection. “Toyota Super Long Life Coolant” is pre− mixed with 50% coolant and 50% deion- ized water. This coolant provides protec- tion down to about −35_C (−31_F).
NOTICE
Do not use plain water alone.
Check the condition of the battery and cables. Cold temperatures reduce the capacity of any battery, so it must be in top shape to provide enough power for winter start- ing. Section 7−3 tells you how to visually inspect the battery. Your Toyota dealer and most service stations will be pleased to check the level of charge.
Make sure the engine oil viscosity is suitable for the cold weather. See page 282 in Section 7−2 for recom- mended viscosity. Leaving a heavy sum- mer oil in your vehicle during winter months may cause harder starting. If you are not sure about which oil to use, call your Toyota dealer—he will be pleased to help. Keep the door locks from freezing. Squirt lock de−icer or glycerine into the locks to keep them from freezing. Use a washer fluid containing an anti- freeze solution. This product is available at your Toyota dealer and most auto parts stores. Follow the manufacturer’s directions for how much to mix with water.
NOTICE
Do not use engine antifreeze or any other substitute because it may dam- age your vehicle’s paint.
2004 CAMRY from Jul. ’03 Prod. (OM33616U)
into
in and around
Do not use your parking brake when there is a possibility it could freeze. When parking, put the transmission into “P” (automatic) or first or reverse (manual) and block the rear wheels. Do not use the parking brake, or snow or water accumulated the freeze, parking brake mechanism may making it hard to release. Keep ice and snow from accumulating under the fenders. Ice and snow built up under your fenders can make steering difficult. During bad winter driving, stop and check under the fenders occasionally. Depending on where you are driving, we recommend you carry some emer- gency equipment. Some of the things you might put in the vehicle are tire chains, window scraper, bag of sand or salt, flares, small shovel, jumper cables, etc.
’04Camry_U (L/O 0307)
Dinghy towing (with automatic transmission)
Dinghy towing (with manual transmission)
Your vehicle to be dinghy towed (with four wheels on the ground) behind a motorhome.
is not designed
Your vehicle can be dinghy towed (with four wheels on the ground) from the front behind a motorhome.
NOTICE
CAUTION
Do not tow your vehicle with four wheels on the ground. This may cause serious damage to your vehicle.
Dinghy towing requires special equip- ment and accessories. Please refer to your service outlet of the motorhome manufacture recommended equipment.
the
for
NOTICE
Dinghy towing does not eliminate the possibility of damage to your vehicle.
227
2004 CAMRY from Jul. ’03 Prod. (OM33616U)
’04Camry_U (L/O 0307)
DINGHY TOWING TIPS Before dinghy towing, be sure to ob- serve the following in order to reduce the damage to your vehicle. 1. Put the shift lever in neutral. 2. Turn the ignition switch to the “ACC” position. Make sure the audio is turned off and any item is not plugged into the power outlet.
NOTICE
To avoid the locking of the steering wheel, turn the ignition switch to the “ACC” position.
3. Release the parking brake. After dinghy towing, let the engine idle for more than 3 minutes before driving the vehicle.
228
NOTICE
Do not tow your vehicle from the rear. This may cause serious damage to your vehicle.
vehicle. Towing
Trailer towing Your vehicle is designed primarily as a passenger−carrying trailer will have an adverse effect on handling, performance, braking, durability and driving economy (fuel consumption, etc.). Your safety and satisfaction depend on the proper use of correct equipment and cautious driving habits. For your safety and the safety of others, you must not overload your vehicle or trailer. Toyota warranties do not apply to damage or malfunction caused by towing a trailer for commercial purposes. Ask your local further details before Toyota dealer towing.
for
NOTICE
When towing a trailer, be sure to con- sult your Toyota dealer for further in- formation on additional requirements such as a towing kit, etc.
2004 CAMRY from Jul. ’03 Prod. (OM33616U)
’04Camry_U (L/O 0307)
WEIGHT LIMITS Before towing, make sure the total trailer weight, gross vehicle weight, gross axle weight and trailer tongue load are all with- in the limits. The total trailer weight and tongue load can be measured with platform scales found at a highway weighing station, build- ing supply company, trucking company, junk yard, etc.
CAUTION
D The
total
trailer weight its cargo
(trailer weight plus load) must not exceed 907 kg (2000 lb.). Ex- ceeding this weight is dangerous.
D Trailer hitch assemblies have differ- ent weight capacities established by the hitch manufacturer. Even though the vehicle may be physically capa- ble of towing a higher weight, the operator must determine the maxi- mum weight rating of the particular hitch assembly and never exceed the maximum weight rating speci- fied for the trailer−hitch. Exceeding the maximum weight rating set by the trailer hitch manufacturer can cause an accident resulting in seri- ous personal injuries.
indicated on
D The gross vehicle weight must not the Gross Vehicle Weight exceed (GVWR) the Rating Certification Label. The gross ve- hicle weight is the sum of weights of the unloaded vehicle, driver, pas- sengers, luggage, hitch and trailer tongue includes the weight of any special equipment installed on your vehicle.
It also
load.
229
2004 CAMRY from Jul. ’03 Prod. (OM33616U)
’04Camry_U (L/O 0307)
D The load on either the front or rear axle resulting from distribution of the gross vehicle weight on both axles must not exceed the Gross Axle Weight Rating (GAWR) listed on the Certification Label.
Total trailer weight
Tongue load
Tongue load
Total trailer weight
100 = 9 to 11%
D The trailer cargo
the
total
to 11% of
load should be distributed so that the tongue load is 9 trailer weight, not exceeding the maximum of 90 kg (200 lb.). Never load the trailer with more weight in the back than in the front. About 60% of the trailer load should be in the front half of the trailer and the remaining 40% in the rear.
HITCHES D Use only a hitch which
recom- mended by the hitch manufacturer and conforms to the total trailer weight re- quirement.
is
D Follow the directions supplied by the hitch manufacturer. Lubricate the hitch ball with a light coat of grease.
D Toyota recommends removing the trail- er hitch whenever you are not towing to reduce the possibility of additional damage caused by the hitch if your vehicle is struck from behind.
trailer
NOTICE
Do not use axle−mounted hitches as they can cause damage to the axle housing, wheel bearings, wheels or tires. Also, never install a hitch which may interfere with the normal function of an Energy Absorbing Bumper, if so equipped.
BRAKES AND SAFETY CHAINS D Toyota
recommends
trailers with brakes that conform to any applica- ble federal and state/provincial regu- lations.
230
2004 CAMRY from Jul. ’03 Prod. (OM33616U)
’04Camry_U (L/O 0307)
D A safety chain must always be used between the towing vehicle and the trailer. Leave sufficient slack in the chain for turns. The chain should cross under to prevent the tongue from dropping to the ground in case it becomes dam- aged or separated. For correct safety chain procedures, follow the hitch or trailer manufacturer’s recommenda- tions.
tongue
trailer
the
TIRES D Ensure
recommended cold
that your vehicle’s
the indicated below
tires are properly inflated. Adjust the tire pres- tire sure to pressure (see page 287 in Section 7−2 and page 312 in Section 8 for instructions.): Tire pressure, kPa (kgf/cm2 or bar, psi) P205/65R15 92T or P205/65R15 92H 220 (2.2, 32) 220 (2.2, 32)
Front Rear
P215/60R16 94V
Front Rear
200 (2.0, 29) 200 (2.0, 29) D The trailer tires should be inflated to the pressure recommended by the trail- er manufacturer in respect to the total trailer weight.
CAUTION
D If the total trailer weight exceeds 453 kg (1000 lb.), trailer brakes are required.
D Never tap
into your vehicle’s hy- draulic system as it would lower its braking effectiveness.
D Never tow a trailer without using a safety chain securely attached to both the trailer and the vehicle. If damage occurs to the coupling unit or hitch ball, there is danger of the trailer wandering over into another lane.
local
local
TRAILER LIGHTS D Trailer lights must comply with federal, regulations. state/provincial and See your recreational vehicle dealer or rental agency for the correct type of wiring and relays for your trail- er. Check for correct operation of the turn signals and stop lights each time you hitch up. Direct splicing may dam- age your vehicle’s electrical system and cause a malfunction of your lights.
BREAK−IN SCHEDULE D Toyota recommends
that you do not tow a trailer with a new vehicle or a vehicle with any new power train com- ponent (engine, transmission, differen- tial, wheel bearing, etc.) for the first 800 km (500 miles) of driving.
MAINTENANCE D If you tow a trailer, your vehicle will require more frequent maintenance due to the additional load. For this informa- tion, please the scheduled maintenance information in the “Sched- uled Maintenance Guide” or “Owner’s Manual Supplement”.
refer
to
D Retighten all fixing bolts of the towing ball and bracket after approximately 1000 km (600 miles) of trailer driving.
231
2004 CAMRY from Jul. ’03 Prod. (OM33616U)
’04Camry_U (L/O 0307)
PRE−TOWING SAFETY CHECK D Check that your vehicle remains level when a loaded or unloaded trailer is hitched. Do not drive if the vehicle has an abnormal nose−up or nose−down condition, and check improper tongue load, overload, worn suspension or other possible causes.
for
D Make sure the trailer cargo is securely
loaded so that it can not shift.
D Check that your rear view mirrors con- form to any applicable federal, state/ provincial or local regulations. If not, install the rear view mirrors required for towing purpose.
TRAILER TOWING TIPS When towing a trailer, your vehicle will handle differently than when not tow- ing. The three main causes of vehicle− trailer accidents are driver error, exces- sive speed and improper trailer loading. Keep these in mind when towing: D Before starting out, check operation of the lights and all vehicle−trailer connec- tions. After driving a short distance, stop and recheck the lights and con- nections. Before actually towing a trail- er, practice turning, stopping and back- ing with a trailer in an area away from traffic until you learn the feel.
232
D Backing with a trailer is difficult and requires practice. Grip the bottom of the steering wheel and move your hand to the left to move the trailer to the left. Move your hand to the right to move the trailer to the right. (This pro- cedure that when backing without a trailer.) Also, just turn the steering wheel a little at time, avoiding sharp or prolonged turning. Have someone guide you when backing to reduce the risk of an acci- dent.
is generally opposite
to
increased when
D Because stopping distance may be in- vehicle−to−vehicle distance creased, should be towing a trailer. For each 16 km/h (10 mph) of speed, allow at least one vehicle and trailer length between you and the ve- hicle ahead. Avoid sudden braking as you may skid, resulting in jackknifing and loss of control. This is especially true on wet or slippery surfaces.
D Avoid jerky starts or sudden accelera- tion. If your vehicle has a manual transmission, prevent excessive clutch slippage by keeping engine rpm low and not racing the engine. Always start out in first gear.
D Avoid jerky steering and sharp turns. The trailer could hit your vehicle in a tight turn. Slow down before making a turn to avoid the necessity of sudden braking.
D Remember that when making a turn, the trailer wheels will be closer than the vehicle wheels to the inside of the turn. Therefore, compensate for this by making a turning radius with your vehicle.
than normal
larger
D Crosswinds and rough roads will ad- versely affect handling of your vehicle and trailer, causing sway. Pay attention to the rear from time to time to pre- pare yourself for being passed by large trucks or buses, which may cause your vehicle and trailer to sway. If swaying happens, firmly grip the steering wheel and immediately but gradually. Never increase speed. Steer straight ahead. If you make no extreme correction with the steering or brakes, the vehicle and trailer will stabilize.
reduce speed
D Be careful when passing other ve- hicles. Passing requires considerable distance. After passing a vehicle, do not forget the length of your trailer and be sure you have plenty of room be- fore changing lanes.
2004 CAMRY from Jul. ’03 Prod. (OM33616U)
’04Camry_U (L/O 0307)
D In order to maintain engine braking effi- ciency do not use fifth gear (manual transmission) or overdrive (automatic transmission).
(at
D Because of the added load of the trail- er, your vehicle’s engine may overheat on hot days temperatures over 30_C [85_F]) when going up a long or steep grade with a trailer. If the engine coolant indicates overheating, immediately turn off the air conditioning (if in use), pull off the road and stop in a safe spot. Refer to “If your vehicle overheats” on page 242 in Section 4.
temperature gauge
D Always place wheel blocks under both the vehicle and trailer wheels when parking. Apply the parking brake firmly. Put the transmission in “P” (automatic) or in first or reverse (manual). Avoid parking on a slope with a trailer, but if it cannot be avoided, do so only after performing the following:
1. Apply the brakes and hold. 2. Have someone place wheel blocks un- der both the vehicle and trailer wheels. 3. When the wheel blocks are in place, the
release your brakes slowly until blocks absorb the load.
4. Apply the parking brake firmly. 5. Shift into first or reverse (manual) or “P” (automatic) and turn off the engine. When restarting out after parking on a slope: 1. With the transmission in “P” position the clutch pedal de- the engine. transmission, be the brake pedal de-
(automatic) or pressed (With an automatic sure pressed.)
(manual), start
to keep
2. Shift into gear. 3. Release the parking brake (also foot brake on automatic transmission ve- hicles) and slowly pull or back away from the wheel blocks. Stop and apply your brakes.
4. Have someone retrieve the blocks.
CAUTION
towing speed
D Do not exceed 72 km/h (45 mph) or the posted limit, whichever is lower. Because insta- bility (swaying) of a towing vehicle− trailer in- creases as the speed increases, ex- ceeding 72 km/h (45 mph) may cause loss of control.
combination
usually
D Slow down and downshift before descending steep or long downhill grades. Do not make sudden down- shifts.
long or
D Avoid holding the brake pedal down too frequently. This could cause the brakes to overheat and result in reduced braking effi- ciency.
too
233
2004 CAMRY from Jul. ’03 Prod. (OM33616U)
How to save fuel and make your vehicle last longer Improving fuel economy is easy—just take it easy. It will help make your vehicle last longer, too. Here are some specific tips on how to save money on both fuel and repairs: D Keep your tires inflated at the cor- rect pressure. Underinflation causes tire wear and wastes fuel. See page 287 in Section 7−2 for instructions. D Do not carry unneeded weight
in your vehicle. Excess weight puts a heavier the engine, causing greater fuel consumption.
load on
D Avoid lengthy warm−up idling. Once the engine is running smoothly, begin driving—but gently. Remember, howev- er, that on cold winter days this may take a little longer.
D Keep
the automatic
transmission overdrive turned on when engine braking is not required. Driving with the overdrive off will reduce the fuel economy. (For details, see “Automatic transmission” on page 121 in Section 1−7.)
D Accelerate
slowly
smoothly. Avoid jackrabbit starts. Get into high gear as quickly as possible.
and
234
’04Camry_U (L/O 0307)
D Avoid long engine idling. If you have a long wait and you are not in traffic, it is better to turn off the engine and start again later.
D Avoid engine
lugging or over−rev- ving. Use a gear position suitable for the road on which you are travelling.
D Avoid continuous speeding up and slowing down. Stop−and−go driving wastes fuel.
D Avoid unnecessary stopping and braking. Maintain a steady pace. Try to time the traffic signals so you only need to stop as little as possible or take advantage of through streets to avoid traffic lights. Keep a proper dis- tance from other vehicles to avoid sud- den braking. This will also reduce wear on your brakes.
D Avoid heavy traffic or traffic
whenever possible.
jams
D Do not rest your foot on the clutch or brake pedal. This causes premature wear, overheating and poor fuel econo- my.
D Maintain a moderate speed on high- ways. The faster you drive, the greater the fuel consumption. By reducing your speed, you will cut down on fuel con- sumption.
the
D Keep
front wheels
in proper alignment. Avoid hitting the curb and slow down on rough roads. Improper alignment not only causes faster tire wear but also puts an extra load on the engine, which, in turn, wastes fuel. D Keep the bottom of your vehicle free from mud, etc. This not only lessens weight but also helps prevent corro- sion.
D Keep your vehicle tuned−up and in top shape. A dirty air cleaner, improp- er valve clearance, dirty plugs, dirty oil and grease, brakes not adjusted, etc. all lower engine performance and con- tribute to poor fuel economy. For longer life of all parts and lower operating costs, keep all maintenance work on schedule, and if you often drive under severe conditions, see that your vehicle frequent maintenance. receives more (For scheduled maintenance informa- tion, please refer the “Scheduled Maintenance Guide” or “Owner’s Manu- al Supplement”.)
to
2004 CAMRY from Jul. ’03 Prod. (OM33616U)
’04Camry_U (L/O 0307)
CAUTION
Never turn off the engine to coast down hills. Your power steering and brake booster will not function with- out the emission control system operates properly only when the engine is run- ning.
the engine running. Also,
235
2004 CAMRY from Jul. ’03 Prod. (OM33616U)
’04Camry_U (L/O 0307)
236
2004 CAMRY from Jul. ’03 Prod. (OM33616U)
’04Camry_U (L/O 0307)
SECTION 4
IN CASE OF AN EMERGENCY In case of an emergency If your vehicle will not start If your engine stalls while driving If you cannot increase the engine speed If your vehicle overheats If you have a flat tire If your vehicle becomes stuck If your vehicle needs to be towed If you cannot shift automatic transmission selector lever If you lose your keys If you lose your wireless remote control transmitter
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
238
241
241
242
243
253
253
258
259
259
237
2004 CAMRY from Jul. ’03 Prod. (OM33616U)
’04Camry_U (L/O 0307)
NOTICE
Do not pull− or push−start the ve- hicle. It may damage the vehicle or cause a collision when the engine starts. Also the three−way catalytic converter may overheat and become a fire hazard.
If the engine turns over at its normal speed but will not start— 1. Turn ignition key
the
to