2003 Pontiac Grand Am Owners Manual

cooz

The 2003 Pontiac Grand Am Owner Manual

1-1 Seats and Restraint Systems ........................... 1-2 ............................................... 1-8 ............................................... .............................................. 1-9 1-32

Front Seats Rear Seats Safety Belts Child Restraints Supplemental Restraint

.......................................

System (SRS)

Restraint System Check

...................................... ............................

Features and Controls .....................................

1-53 1-60 2-1

.......................................

........................................................ 2-2

....................................................

................................................. ............................

Keys Doors and Locks Windows Theft-Deterrent Systems Starting and Operating Your Vehicle Mirrors Stcr3.g~ .A rean Sunroof

2-7 2-1 5 2-1 7 ........... 2-18 2-35 ................... 2-37 2-38 Instrument Panel ............................................. 3-1 3-2 3-1 8 ......... 3-22 ....................................... 3-38

Instrument Panel Overview Climate Controls \Warning Lights, Gages a.nd Indicators Audio System@)

.......................... ......................................

..................................................

..........

Your Driving, Towing

Driving Your Vehicle

.......................................

the Road, and Your Vehicle

................................................... Service and Appearance Care .......................... ..................................................... .........................................................

Service Fuel Checking Things Under

4-1 ..... 4-2 4-32 5-1 5-3 5-5

the Hood

.....................................

.............................................

Bulb Replacement Windshield Wiper Blade Replacement Tires Appearance Care Vehicle Identification Electrical System Capacities and Specifications Normai iviainienance Fiepiawl I 1t.1-1; F&iJiS

5-10 .................................... 5-49 ......... 5-52 ...................................................... 5-53 5-72 ................................. 5-80 ...................................... 5-81 5-86 ...... 5-00 nn 6-1 6-2 7-1 .................. 7-2 ..I

Maintenance Schedule ..................................... ................................ Customer Assistance Information ....................

Index ...............................................................

Customer Assistance Information

bhintenance Schedule

.....................

PONTIAC 11

GENERAL MOTORS, GM, the GM Emblem, PONTIAC, the PONTIAC Emblem and the name GRAND AM are registered trademarks of General Motors Corporation. This manual includes the latest information at the time it was printed. We reserve the right to make changes after that time without further notice. For vehicles first sold in Canada, substitute the name “General Motors of Canada Limited’’ for Pontiac Division whenever it appears in this manual. Please keep this manual in your vehicle, so it will be there if you ever need it when you’re on the road. If you sell the vehicle, please leave this manual in it so the new owner can use it.

Canadian Owners You can obtain a French copy of this manual from your dealer or from: Helm, Incorporated P.O. Box 07130 Detroit, MI 48207 How to Use This Manual Many people read their owner’s manual from beginning to end when they first receive their new vehicle. If you do this, it will help you learn about the features and controls for your vehicle. In this manual, you’ll find that pictures and words work together to explain things. Index A good place to look for what you need is the Index in back of the manual. It’s an alphabetical list of what’s in the manual, and the page number where you’ll find it.

Litho in U.S.A. Part No. 22691531 A First Edition

‘Copyright General Motors Corporation 06/03/02 All Rights Reserved

II

Safety Warnings and Symbols

You will find a number of safety cautions in this book. We use a box and the word CAUTION to tell you about things that could hurt you if you were to ignore the warning.

1 You will also find a circle . - -. with a slash through it in this book. This safety symbol means “Don’t,’’ “Don’t do this’’ or “Don’t let this happen.”

I These mean there is something that could hurt

you or other people.

In the caution area, we tell you what the hazard is. Then we tell you what to do to help avoid or reduce the hazard. Please read these cautions. If you don’t, you or others could be hurt.

... 111

Vehicle Symbols Your vehicle may be equipped with components and labels that use symbols instead of text. Symbols, used on your vehicle, are shown along with the text describing the operation or information relating to a specific component, control, message, gage or indicator. If you need help figuring out a specific name of a component, gage or indicator reference the following topics in the Index:

“Engine Compartment Overview”

* “Instrument Panei Overview”

“Climate Controls’’ “Audio Systems”

Also see Warning Lights, Gages and Indicators on page 3-22.

Vehicle Damage Warnings Also, in this book you will find these notices: Notice: These mean there is something that could damage your vehicle. A notice will tell you about something that can damage your vehicle. Many times, this damage would not be covered by your warranty, and it could be costly. But the notice will tell you what to do to help avoid the damage. When you read other manuals, you might see CAUTION and NOTICE warnings in different colors or in different words. You’ll also see warning labels on your vehicle. They use the same words, CAUTION or NOTICE.

iv

These are some examples of vehicle symbols you may find on your vehicle:

LATCH BOTH LAP AND SHOULDER BELTS TO PROTECT OCCUPANT 4 DO NOT TWIST SAFETY BELT WHEN ATTACHING

CAUTION POSSIBLE INJURY

PROTECT EYES BY SHIELDING

CAUSTIC BATTERY 4CID COULD CAUSE BURNS

AVOID SPARKS OR FLAMES

FASTEN SEAT BELTS

MOVE SEAT FULLY REARWARD+ SECURE CHILD SEAT

PULL BELT

\!& /z

DO NOT INSTALL A REAR-FACING CHILD RESTRAINT IN THIS SEATING POSITION

DO NOT INSTALL A FORWARD-FACING CHILD RESTRAINT IN THIS SEATING POSITION

DOOR LOCK UNLOCK

COMPLETELY -HEN SECURE CHILD SEAT

SPARK OR

FLAME 'lb' COULD EXPLODE BATTERY

?"!"!E?

WINDOW

FJ

ACCESS

LIGHTING -

PARKING PC

LAMPS

ENGINE COOLANT TEMP

CHARGING 1-1

BAlTERY

SYSTEM

ENGINE COOLANT FAN

COOLANT a

FUEL

OWNER'S MANUAL

LAMPS w

FOG

ENGINE OIL PRESSURE W

SERVICE

ANTI-LOCK fm) BRAKES \u/

SERVICE iviAi\iuWi

Section 1 Seats and Restraint Sy

Front Seats ...................................................... 1.2 1.2

Manual Seats ................................................ Six-Way Power Driver Seat .............................. 1-3 ,-. Reclining Seatbacks 1 -;j Head Restraints ............................................. 1.5 Seatback Latches ........................................... 1-5 Easy Entry Seat ............................................. 1-6 Power Lift Seat .............................................. 1-7 Rear Seats ....................................................... 1-8

........................................

Rear Seat Operation .......................................

1.8 Safety Belts ..................................................... 1.9 Safety Belts: They Are for Everyone ................. 1-9 Questions and Answers About Safety Belts ...... 1-1 3 How to Wear Safety Belts Properly ................. 1-14 Driver Position .............................................. 1-1 4 Safety Belt Use During Pregnancy .................. 1-22 Right Front Passenger Position ....................... 1-23 Rear Seat Passengers .................................. 1.23 U G I 11G1 I IbUI I U ~ ~ ~ O I L J U I V V I . ~ V . ...................... 1-27 Rear Safety Belt Comfort Guides for Children

0 n - v Dnemnnnnr Dneitinn

Safety Belt Extender

and Small Adults ....................................... 1-29 ..................................... 1-31 Child Restraints ............................................. 1.32 Older Children .............................................. 1-32 Infants and Young Children ............................ 1-34 Child Restraint Systems ................................. 1-38

p - - + - v

Where to Put the Restraint ............................. 1-41 Top Strap .................................................... 1-42 Top Strap Anchor Location ............................. 1.43 Lower Anchorages and Top Tethers for

Children (LATCH System) ...........................

Securing a Child Restraint Designed for the

LATCH System ......................................... 1-46

Securing a Child Restraint in a Rear Outside

Seat Position ............................................ 1-46

Securing a Child Restraint in a Center Rear

Seat Position ............................................ 1-48

Securing a Child Restraint in the Right Front

Seat Position ............................................ 1-50

1 -44

Supplemental Restraint

System (SRS) ............................................. 1-53 Where Are the Air Bags? ............................... 1-55 When Should an Air Bag Inflate? .................... 1-56 What Makes an Air Bag Inflate? ..................... 1-57 n u w Lues 5i-l Ail- Ea9 ECS~E~G? ..................... 157’ What Will You See After an Air Bag Inflates? ... 1-58 Servicing Your Air Bag-Equipped Vehicle ......... 1-59 Restraint System Check .................................. 1-60 Checking Your Restraint Systems ................... 1-60 Repiacing Resirzlint System Parts

After a Crash ............................................ 1-61

1-1

Front Seats

Manual Seats

You can lose control of the vehicle if you try to adjust a manual driver’s seat while the vehicle is moving. The sudden movement could startle and confuse you, or make you push a pedal when you don’t want to. Adjust the driver’s seat only when the vehicle is not moving.

1 -2

Lift the bar located under the front of the seat to unlock it. Slide the seat to where you want it and release the bar. Try to move the seat with your body to be sure the seat is locked in place.

Six-Way Power Driver Seat

Reclining Seatbacks

If your vehicle has this feature, the power seat control is located on the outboard side of the driver's seat.

This control allows you to move the seat up, down, forward, or backward. It will also move the front or rear of the seat cushion up or down.

Move the seat forward or rearward by pushing the control toward the front or rear of the vehicle. Raise or lower the entire seat cushion by holding the control up or down. Raise or lower the front of the seat cushion by holding the front of the control up or down. Raise or lower the rear of the seat cushion by holding the rear of the control up or down.

To adjust the seatback, lift the lever located on the outboard side of the seat and move the seatback to where you want it. Release the lever to lock the seatback. Pull up on the lever without pushing on the seaiback ana iile seaiuack wiii yu iu 2i-l Uprighi ~ G S ~ ~ G K .

1 -3

I Sitting in a reclined position when your vehicle is in motion can be dangerous. Even if you buckle up, your safety belts can’t do their job when you’re reclined like this. The shoulder belt can’t do its job because it won’t be against your body. Instead, it will be in front of you. In a crash you could go into it, receiving neck or other injuries. The lap belt can’t do it’s job either. In a crash the belt could go up over your abdomen. The belt forces would be there, not at your pelvic bones. This could cause serious internal injuries. For proper protection when the vehicle is in motion, have the seatback upright. Then sit well back in the seat and wear your safety belt properly.

But don’t have a seatback reclined if your vehicle is moving.

1 -4

Head Restraints

Slide the head restraint up or down so that the top of :m m l n r . n m t tn +hn tnn n f \ / n ~ t r hnad Thic L I I C I G 3 L I U t I I l l a blkJaba& b u L I IW r w p V I y vu- I IVCIU. a I ~ I Y position reduces the chance of a neck injury in a crash.

+L- r - - + r - : n +

Seatback Latches For two-door model vehicles, the front seatbacks fold forward to let people get into the back seat. The seatback latch is designed for one-handed operation. To fold a front seatback forward, lift the seatback latch fully without pushing forward on the seatback to unlock it. Then the seatback will fold forward. Push the seatback to its original position, and the seatback will lock.

forward in a sudden stop or crash. That could cause injury to the person sitting there. Always press rearward on the seatback to be sure it is

1-5

Easy Entry Seat For two-door model vehicles, the right front seat of your vehicle makes it easy for people to get in and out of the rear seat.

1. Fold the right front seatback forward by lifting the

seatback latch fully.

2. The seat will slide forward to allow someone to get

into the rear seat area.

3. Push the seatback upright to seat fully rearward to lock it.

lock it and slide the

4. Adjust the seat to the desired position. 5. The front passenger should try to move the seat to

make sure the seat is locked into place.

4b CAUTION:

If the easy entry right front seat isn't locked, it can move. In a sudden stop or crash, the person sitting there could be injured. After you've used it, be sure to push rearward on an easy entry seat to be sure it is locked.

I -6

Bower Lift Seat

If your vehicle has this feature, to move the power lift seat forward or rearward, pull up on the lever located under the front of the driver’s seat to unlock it. Slide the seat to where you want it and release the lever. Try ..,:&h . , e , l r h,-.A,, +- LW I I I W V C LI 12 acat V V I U I y u u ~ uuuy LW is locked into place.

--Iln I I I U I \ ~ ~ U I U II I U u w u t

+hn c.--t

.- +L.

- - - &

L-

To raise or lower the power lift seat, hold the switch located on the outboard side of the driver’s seat up or down.

1 -7

Rear Seats

Rear Seat Operation Folding the Seatback If your vehicle has this feature, do the following:

2. Fold the seatback down from the inside of the

vehicle.

To raise the seatback, push the seatback up to return it to its original position. Push and pull on the seatback to make sure it is latched securely in the fully upright position.

1. Pull the release straps

located in the trunk. The right strap operates the passenger’s side rear split seat. The left strap operates the driver’s side rear split seat.

1-8

Safety Belts

Safety Belts: They Are for Everyone

This part of the manual tells you how to use safety belts properly. It also tells you some things you should not do with safety belts.

CA UTl0,N:

Don’t let anyone ride where he or she can’t wear a safety belt properly. If you are in a crash and you’re not wearing a safety belt, your injuries can be much worse. You can hit things inside the vehicle or be ejected from it. You can be seriously injured or killed. In the same crash, you might not be, if you are buckled up. Always fasten your safety belt, ana cneck tnai your passengers’ Leiis art: fastened properly too.

It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. Do not allow people to ride in any area of your vehicle that is not equipped with seats and safety belts. Be sure everyone in your vehicle is in a seat and using a safety belt properly.

1-9

Your vehicle has a light that comes on as a reminder to buckle up. See Safety Belt Reminder Light on page 3-25.

Why Safety Belts Work When you ride in or on anything, you go as fast as it goes.

1-10

ZC-C

Questions and Answers About Safety Belts

accident id I’m wearing a safety belt?

Q: Won’t I be trapped in the vehicle after an A: You could be - whether you’re wearing a safety belt or not. But you can unbuckle a safety belt, even if you’re upside down. And your chance of being conscious during and after an accident, so you can unbuckle and get out, is much greater if you are belted.

Q: If my vehicle has air bags, why should I have to A: Air bags are in many vehicles today and will be in

wear safety belts?

- - $ - + S T

1 1 I Q L ~ W U V, LI , U B I , . L I V i

k-l+c. m n + inctnrrd n f thorn C \ , n n r Y sir b2,-1 3

most of them in the future. But they are supplemental systems only; so they work with a a l c r y U G I W - I I W L system ever offered for sale has required the use of safety belts. Even if you’re in a vehicle that has air bags, you still have to buckle up to get the most protection. That’s true not oniy in frontal collisions, but especially in side and other collisions.

1-13

or the safety belts! With safety belts, you slow down as the vehicle does. Y n ~ r r p t more time to stop. You stop over more distance, and your strongest bones take the forces. That’s why safety belts make such good sense.

First, you’ll want to know which restraint systems your vehicle has. We’ll start with the driver position.

Driver Position

This part describes the driver’s restraint system. Lap-Shsulder Belt The driver has a lap-shoulder belt. Here’s how to wear it properly. 1. Close and lock the door. 2. Adjust the seat so you can sit up straight. To see how, see Manual Seats on page 1-2 or Six-Way Power Driver Seat on page 1-3.

home, why should I wear safety belts?

Q: If I’m a good driver, and I never drive far from A: You may be an excellent driver, but if you’re in an accident - even one that isn’t your fault - you and your passengers can be hurt. Being a good driver doesn’t protect you from things beyond your control, such as bad drivers. Most accidents occur within 25 miles (40 km) of home. And the greatest number of serious injuries and deaths occur at speeds of less than 40 mph (65 km/h). Safety belts are for everyone.

How to Wear Safety Belts Properly This part is only for people of adult size. Be aware that there are special things to know about safety belts and children. And there are different rules for smaller children and babies. If a child will be riding in your vehicle, see Older Children on page 1-32 or lnfants and Young Children on page 1-34. Follow those rules for everyone’s protection.

1-14

3. Pick up the latch plate and pull the belt across you.

Don’t let it get twisted. The shoulder belt may lock if you pull the belt across you very quickly. If this happens, let the belt go back slightly to unlock it. Then pull the belt across you more slowly.

4. Push the latch plate into the buckle until it clicks.

Pull up on the latch plate to make sure it is secure. If the belt isn’t long enough, see Safety Belt Extender on page 1-31. Make sure the release button on the buckle is positioned so you would be able to unbuckle the safety belt quickly if you ever had to.

1-15

5. To make the lap part tight, pull down on the buckle end of the belt as you pull up on the shoulder belt.

The lap part of the belt should be worn low and snug on the hips, just touching the thighs. In a crash, this applies force to the strong pelvic bones. And you’d be less likely to slide under the lap belt. If you slid under it, the belt would apply force at your abdomen. This could cause serious or even fatal injuries. The shoulder belt should go over the shoulder and across the chest. These parts of the body are best able to take belt restraining forces. The safety belt locks if there’s a sudden stop or crash, or if you pull the belt very quickly out of the retractor.

1-16

Shoulder Belt Height Adjuster (Four-Door Models) Before you begin to drive, move the shoulder belt

adjuster to the height that is right for you. - To move it down, squeeze the release button and move

the height adjuster to the desired position. You can move the adjuster up just by pushing on the shoulder belt guide. After you move the adjuster to where you want it, try to move it down without squeezing the release button to make sure it has locked into position. Adjust the height so that the shoulder portion of the belt is centered on your shoulder. The belt should be away from your face and neck, but not falling off your shoulder.

1-17

Q: What’s wrong with this?

You can be seriously hurt if your shoulder belt is too loose. In a crash, you would move forward too much, which could increase injury. The shoulder belt should fit against your body.

A: The shoulder belt is too loose. It won’t give nearly

as much protection this way.

1-18

Q: What’s wrong with this?

A: The belt is buckled in the wrong place.

You can be seriously injured if your belt is buckled in the wrong place like this. In a crash, the belt would go up over your abdomen. The belt forces would be there, not at the pelvic bones. This could cause serious internal injuries. Always buckle your belt into the buckle nearest you.

1-19

Q: What's wrong with this?

You can be seriously injured if you wear the shoulder belt under your arm. In a crash, your body would move too far forward, which would increase the chance of head and neck injury. Also, the belt would apply too much force to the ribs, which aren't as strong as shoulder bones. You could also severely injure internal organs like your liver or spleen.

A: The shoulder belt is worn under the arm. It should

be worn over the shoulder at all times.

1-20

Q: What’s wrong with this?

You can be seriously injured by a twisted belt. In a crash, you wouldn’t have the full width of the belt to spread impact forces. If a belt is twisted, make it straight so it can work properly, or ask your dealer to fix it.

A: The belt is twisted across the body.

1-21

Safety Belt Use During Pregnancy

Safety belts work for everyone, including pregnant women. Like all occupants, they are more likely to be seriously injured if they don't wear safety belts.

To unlatch the belt, just push the button on the buckle. The belt should go back out of the way. Before you close the door, be sure the belt is out of the way. If you slam the door on it, you can damage both the belt and your vehicle.

1-22

A pregnant woman should wear a lap-shoulder belt, and the lap portion should be worn as low as possible, below the rounding, throughout the pregnancy.

The best way to protect the fetus is to protect the mother. When a safety belt is worn properly, it’s more likely that the fetus won’t be hurt in a crash. For pregnant women, as for anyone, the key to making safety belts effective is wearing

them properly.

To learn how to wear the right front passenger’s safety belt properly, see Driver Position on page 1-14. The right front passenger’s safety belt works the same way as the driver’s safety belt - except for one thing. If you ever pull the shoulder portion of the belt out all the way, you will engage the child restraint locking feature. If this happens, just let the belt go back all the way and start again.

Rear Seat Passengers It’s very important for rear seat passengers to buckle up! Accident statistics show that unbelted people in the rear seat are hurt more often in crashes than those who are wearing safety belts. Rear passengers who aren’t safety belted can be thrown out of the vehicle in a crash. And they can strike others in the vehicle who are wearing safety belts. Rear Seat Outside Passenger Positions

1-23

Lap-Shoulder Belt The positions next to the windows have lap-shoulder belts. Here’s how to wear one properly.

1. Pick up the latch plate and pull the belt across you.

Don’t let it get twisted. The shoulder belt may lock if you pull the belt across you very quickly. If this happens, let the belt go back slightly to unlock it. Then pull the belt across you more slowly.

2. Push the latch plate into the buckle until

it clicks.

1-24

3. To make the lap part tight, pull down on the buckle end of the belt as you pull up on the shoulder part.

If the belt stops before it reaches the buckle, tilt the latch plate and keep pulling until you can buckle it. Puii up on lne iaicn piaie io make sure ii is secure. If the belt is not long enough, see Safety Belt Extender on page 1-31. Make sure the release button on the buckle is positioned so you would be able to unbuckle the safety belt quickly if you ever had io.

1-25

The safety belt locks if there’s a sudden stop or a crash, or if you pull the belt very quickly out of the retractor.

You can be seriously hurt if your shoulder belt is too loose. In a crash, you would move forward too much, which could increase injury. The shoulder belt should fit against your body.

The lap part of the belt should be worn low and snug on the hips, just touching the thighs. In a crash, this applies force to the strong pelvic bones. And you’d be less likely to slide under the lap belt. If you slid under it, the belt would apply force at your abdomen. This could cause serious or even fatal injuries. The shoulder belt should go over the shoulder and across the chest. These parts of the body are best able to take belt restraining forces.

1-26

Center Rear Passenger Position

To unlatch the belt, just push the button on the buckle.

1-27

Lap Belt

When you sit in the center seating position, you have a lap safety belt, which has no retractor. To make the belt longer, tilt the latch plate and pull it along the belt.

To make the belt shorter, pull its free end as shown until the belt is snug. Buckle, position and release it the same way as the lap part of a lap-shoulder belt. If the belt isn’t long enough, see Safety Belt Extender on page 1-31. Make sure the release button on the buckle is positioned so you would be able to unbuckle the safety belt quickly if you ever had to.

1-28

Rear Safety Belt Comfort Guides for Children and Small Adults

Your vehicle may have this feature already. If it doesn’t, you can get it from any GM dealer. Rear shoulder belt comfort guides will provide added safety belt comfort for older children who have outgrown booster seats and for small adults. When installed on a shoulder belt, the comfort guide better positions the belt away from the neck and head. There is one guide available for each outside passenger position in the rear seat. To provide added safety belt comfort for children who have outgrown child restraints and booster seats and for smaller adults, the comfort guides may be installed on the shoulder belts. Here’s how to install a comfort guide and use the safety belt:

1. Pull the elastic cord out from between the edge of the seatback and the interior body to remove the guide from its storage clip.

1-29

2. Slide the guide under and past the belt. The elastic cord must be under the belt. Then, place the guide over the belt, and insert the two edges of the belt into the slots of the guide.

3. Be sure that the belt is not twisted and it lies flat.

The elastic cord must be under the belt and the guide on top.

1-30

To remove and store the comfort guides, squeeze the belt edges together so that you can take them out of the guides. Pull the guide upward to expose its storage clip, and then slide the guide onto the clip. Turn the guide and clip inward and in between the seatback and the interior body, leaving only the loop of the elastic cord exposed. Safety Belt Extender If the vehicle’s safety belt will fasten around you, you should use it. But if a safety belt isn’t long enough to fasten, your dealer will order you an extender. It’s free. When you go in to order it, take the heaviest coat you will wear, so the extender will be long enough for you. The extender will be just for you, and just for the seat in your vehicle that you choose. Don’t let someone else use it, and use it only for the seat it is made to fit. To wear it, just attach it to the regular safety belt.

1-31

4. Buckle, position and release the safety belt as

described in Rear Seat Passengers on page 1-23. Make sure that the shoulder belt crosses the s h w ! d w

Child Restraints

Older Children

Q: What is the proper way to wear safety belts? A: If possible, an older child should wear a

lap-shoulder belt and get the additional restraint a shoulder belt can provide. The shoulder belt should not cross the face or neck. The lap belt should fit snugly below the hips, just touching the top of the thighs. It should never be worn over the abdomen, which could cause severe or even fatal internal injuries in a crash.

Accident statistics show that children are safer if they are restrained in the rear seat. In a crash, children who are not buckled up can strike other people who are buckled up, or can be thrown out of the vehicle. Older children need to use safety belts properly.

Older children who have outgrown booster seats should wear the vehicle’s safety belts. If you have the choice, a child should sit next to a window so the child can wear a lap-shoulder belt and get the additional restraint a shoulder belt can provide.

1-32

--

Never do this. Here two children are wearing the same belt. The belt can’t properly spread the impact forces. In a crash, the two children can be crushed together and seriously injured. A belt must be used by only one person at a time.

Q: What if a child is wearing a lap-shoulder belt, but the child is so small that the shoulder belt is very close to the child’s face or neck? A: Move the child toward the center of the vehicle, but be sure that the shoulder belt still is on the child’s shoulder, so that in a crash the child’s upper body would have the restraint that belts provide. If the child is sitting in a rear seat outside position, see “Rear Safety Belt Comfort Guides” in the Index. If the child is so small that the shoulder belt is still very close to the child’s face or neck, you might want to place the child in the center seat position, the one that has only a lap belt.

1-33

Never do this. Here a child is sitting in a seat that has a lap-shoulder belt, but the shoulder part is behind the child. If the child wears the belt in this way, in a crash the child might slide under the belt. The belt’s force would then be applied right on the child’s abdomen. That could cause serious or fatal injuries.

Wherever the child sits, the lap portion of the belt should be worn low and snug on the hips, just touching the child’s thighs. This applies belt force to the child’s pelvic bones in a crash.

Infants and Young Children

Everyone in a vehicle needs protection! This includes infants and all other children. Neither the distance traveled nor the age and size of the traveler changes the need, for everyone, to use safety restraints. In fact, the law in every state in the United States and in every Canadian province says children up to some age must be restrained while in a vehicle.

1-34

Every time infants and young children ride in vehicles, they should have the protection provided by appropriate restraints. Young children should not use the vehicle's adult safety belts alone, unless there is no other choice. Instead, they need to use a child restraint.

People should never hold a baby in their arms while riding in a vehicle. A baby doesn't weigh much -- until a crash. During a crash a baby will become so heavy it is not possible to hold it. For example, in a crash at only 25 mph (40 km/h), a 12-lb. (5.5 kg) baby will suddenly become a 240-lb. (1 10 kg) force on a person's arms. A baby should be secured in an appropriate restraint.

1-35

Children who are up against, or very close to, any air bag when it inflates can be seriously injured or killed. Air bags plus lap-shoulder belts offer outstanding protection for adults and older children, but not for young children and infants. Neither the vehicle’s safety belt system nor its air bag system is designed for them. Young children and infants need the protection that a child restraint system can provide.

Q: What are the different types of add-on child A: Add-on child restraints, which are purchased by the

restraints?

vehicle’s owner, are available in four basic types. Selection of a particular restraint should take into consideration not only the child’s weight, height and age but also whether or not the restraint will be compatible with the motor vehicle in which it will be used. For most basic types of child restraints, there are many different models available. When purchasing a child restraint, be sure it is designed to be used

1-36

in a motor vehicle. If it is, the restraint will have a label saying that it meets federal motor vehicle safety standards. The restraint manufacturer’s instructions that come with the restraint, state the weight and height limitations for a particular child restraint. In addition, there are many kinds of restraints available for children with special needs.

Newborn infants need complete support, including support for the head and neck. This is necessary because a newborn infant’s neck is weak and its head weighs so much compared with the rest of its body. In a crash, an infant in a rear-facing seat settles into the restraint, so the crash forces can be distributed across the strongest part of an infant’s body, the back and shoulders. Infants always should be secured in appropriate infant restraints.

is quite

The body structure of a young ch unlike that of an adult or older child, for whom the safety belts are designed. A young child’s hip bones are still so small that the vehicle’s regular safety belt may not remain low on the hip bones, as it should. Instead, it may settle up around the child’s abdomen. In a crash, the belt would apply force on a body area that’s unprotected by any bony structure. This alone could cause serious or fatal injuries. Young children always should be secured in appropriate child restraints.

1-37

Child Restraint Systems

An infant car bed (A), a special bed made for use in a motor vehicle, is an infant restraint system designed to restrain or position a child on a continuous flat surface. Make sure that the infant’s head rests toward the center of the vehicle.

A rear-facing infant seat (B) provides restraint with the seating surface against the back of the infant. The harness system holds the infant in place and, in a crash, acts to keep the infant positioned in the restraint.

1-38

A forward-facing child seat (C-E) provides restraint for the child's body with the harness and also sometimes with surfaces such as T-shaped or shelf-like shields.

A booster seat (F-G) is a child restraint designed to improve the fit of the vehicle's safety belt system. Some booster seats have a shoulder belt positioner, and sui-,-,E: ;-,iy;-,-lcacl\: A booster seat can also help a child to see out the window.

bclclster se6is klzv.e

;;.",e-pG;rlt p,zrrless~

1-39

When choosing a child restraint, be sure the child restraint is designed to be used in a vehicle. If it is, it will have a label saying that it meets federal motor vehicle safety standards. Then follow the instructions for the restraint. You may find these instructions on the restraint itself or in a booklet, or both. These restraints use the belt system in your vehicle, but the child also has to be secured within the restraint to help reduce the chance of personal injury. When securing an add-on child restraint, refer to the instructions that come with the restraint which may be on the restraint itself or in a booklet, or both, and to this manual. The child restraint instructions are important, so if they are not available, obtain a replacement copy from the manufacturer.

Q: How do child restraints work? A: A child restraint system is any device designed for use in a motor vehicle to restrain, seat, or position children. A built-in child restraint system is a permanent part of the motor vehicle. An add-on child restraint system is a portable one, which is purchased by the vehicle’s owner. For many years, add-on child restraints have used the adult belt system in the vehicle. To help reduce the chance of injury, the child also has to be secured within the restraint. The vehicle’s belt system secures the add-on child restraint in the vehicle, and the add-on child restraint’s harness system holds the child in place within the restraint. One system, the three-point harness, has straps that come down over each of the infant’s shoulders and buckle together at the crotch. The five-point harness system has two shoulder straps, two hip straps and a crotch strap. A shield may take the place of hip straps. A T-shaped shield has shoulder straps that are attached to a flat pad which rests low against the child’s body. A shelf-or armrest-type shield has straps that are attached to a wide, shelf-like shield that swings up or to the side.

1-40

Where to Put the Restraint Accident statistics show that children are safer if they are restrained in the rear rather than the front seat. General Motors, therefore, recommends that child restraints be secured in a rear seat, including an infant riding in a rear-facing infant seat, a child riding in a forward-facing child seat and an older child riding in a booster seat. Never put a rear-facing child restraint in the front passenger seat. Here’s why:

A child in a rear-facing child restraint can be seriously injured or killed if the right front passenger’s air bag inflates. This is because the back of the rear-facing child restraint would be very close to the inflating air bag. Always secure a rear-facing child restraint in a rear seat.

CAUTION:

(Continued)

You may secure a forward-facing child restraint in the right front seat, but before you do, always move the front passenger seat as far back as it will go. It’s better to secure the child restraint in a rear seat.

Wherever you install it, be sure to secure the child restraint properly. Keep in mind that an unsecured child restraint can move around in a collision or sudden stop and injure people in the vehicle. Be sure to properly secure any child restraint in your vehicle - even when no child is in it.

1-41

Top Strap

Some child restraints have a top strap, or “top tether”. It can help restrain the child restraint during a collision. For it to work, a top strap must be properly anchored to the vehicle. Some top strap-equipped child restraints are designed for use with or without the top strap being anchored. Others require the top strap always to be anchored. Be sure to read and follow the instructions for your child restraint. If yours requires that the top strap be anchored, don’t use the restraint unless it is anchored properly. If the child restraint does not have a top strap, one can be obtained, in kit form, for many child restraints. Ask the child restraint manufacturer whether or not a kit is available.

1-42

Top Strap Anchor Location Your vehicle has top strap anchors already installed for the rear seating positions. You’ll find them behind the rear seat on the filler panel.

In Canada, the law requires that forward-facing child restraints have a top strap, and that the strap be anchored. In the United States, some child restraints also have a top strap. If your child restraint has a top strap, it should be anchored. Anchor the top strap to one of the following anchor points. Be sure to use an anchor point located on the same side of the vehicle as the seating position where the child restraint will be placed. Once you have the top strap anchored, you’ll be ready to secure the child restraint itself. Tighten the top strap when and as the child restraint manufacturer’s instructions say.

1-43

In order to use the system, you need either a forward-facing child restraint that has attaching points (B) at its base and a top tether anchor (C), or a rear-facing child restraint that has attaching points (B), as shown here.

Lower Anchorages and Top Tethers for Children (LATCH System) Your vehicle has the LATCH system. You’ll find anchors (A) in the rear outside seat positions. To assist you in locating the lower anchors for this child restraint system, each seating position with the LATCH system will have a label applied to the seatback at each anchor position.

The labels are located near the base of the two rear outside seating positions.

1-44

With this system, use the LATCH system instead of the vehicle’s safety belts to secure a child restraint.

If a LATCH-type child restraint isn’t attached to its anchorage points, the restraint won’t be able to protect a child sitting there. In a crash, the child could be seriously injured or killed. Make sure that a LATCH-type child restraint is properly installed using the anchorage points, or use the vehicle’s safety belts to secure the restraint. See “Securing a Child Restraint Designed for the LATCH system” or “Securing a Child Restraint in a Rear Seat Position’’ in the Index for information on how to secure a child restraint in your vehicle.

1 -45

Securing a Child Restraint Designed for the LATCH System

Securing a Child Restraint in a Rear Outside Seat Position

1. Find the anchors for the seating position you want

to use, where the bottom of the seatback meets the back of the seat cushion.

2. Put the child restraint on the seat. 3. Attach the anchor points on the child restraint to the

anchors in the vehicle. The child restraint instructions will show you how.

4. If the child restraint is forward-facing, attach the top

strap to the top strap anchor. See Top Strap on page 1-42. Tighten the top strap according to the child restraint instructions.

5. Push and pull the child restraint in different

directions to be sure it is secure.

To remove the child restraint, simply unhook the top strap from the top tether anchor and then disconnect the anchor points.

1-46

If your child restraint is equipped with the LATCH system, see Lower Anchorages and Top Tethers for Children (LATCH System) on page 1-44. You’ll be using the lap-shoulder belt. See the earlier part about the top strap if the child restraint has one. Be sure to follow the instructions that came with the child restraint. Secure the child in the child restraint when and as the instructions say. 1. Put the restraint on the seat. 2. Pick up the latch plate, and run the lap and shoulder

portions of the vehicle’s safety belt through or around the restraint. The child restraint instructions will show you how.

LP- 1

To remove the child restraint, just unbuckle the vehicle’s safety belt and let it go back all the way. The safety belt will move freely again and be ready to work for an adult or larger child passenger. Securing a Child Restraint in a Center Rear Seat Position

You’ll be using the lap belt. Be sure to follow the instructions that came with the child restraint. Secure the child in the child restraint when and as the instructions say. See Top Strap on page 1-42 if the child restraint has one.

4.

5.

To tighten the belt, pull up on the shoulder belt while you push down on the child restraint. If you’re using a forward-facing child restraint, you may find it helpful to use your knee to push down on the child restraint as you tighten the belt. Push and pull the child restraint in different directions to be sure it is secure.

1-4%

1. Make the belt as long as possible by tilting the latch

plate and pulling it along the belt. ....

---.. 3 Pllt tho rnctraint nn thn cnat 3. Run the vehicle’s safety belt through or around the

*.

I -VI.-..

h.

V . I

. . I -

. . a -

restraint. The child restraint instructions will show you how.

4. Buckle the belt. Make sure the release button is positioned so you would be able to unbuckle the safety belt quickly if you ever had to.

5. To tighten the belt, pull its free end while you push

down on the child restraint. If you’re using a forward-facing child restraint, you may find it helpful to use your knee to push down on the child restraint as you tighten the belt.

6. Push and pull the child restraint in different

directions to be sure it is secure.

1-49

To remove the child restraint, just unbuckle the vehicle’s safety belt. It will be ready to work for an adult or larger child passenger.

Securing a Child Restraint in the Right Front Seat Position

Your vehicle has a right front passenger air bag. Never put a rear-facing child restraint in this seat. Here’s why:

1-50

A child in a rear-facing child restraint can be seriously injured or killed if the right front passenger’s air bag inflates. This is because the back of the rear-facing child restraint would be very close to the inflating air bag. Always secure a rear-facing child restraint in a rear seat.

Although a rear seat is a safer place, you can secure a forward-facing child restraint in the right front seat. You’ll be using the lap-shoulder belt. See Top Strap on page 1-42, if the child restraint has one. Be sure to follow the instructions that came with the child restraint. Secure the child in the child restraint when and as the instructions say. 1. Because your vehicle has a right front passenger

air bag, always move the seat as far back as it will go before securing a forward-facing child restraint. See Manual Seats on page 1-2.

2. Put the restraint on the seat.

3. Pick up the latch plate, and run the lap and shoulder

portions of the vehicte’s safety belt through or around the restraint. The child restraint instructions will show you how.

4. Buckle the belt. Make sure the release button is positioned so you would be able to unbuckle the safety belt quickly if you ever had to.

5. Pull the rest of the shoulder belt all the way out of

the retractor to set the lock.

1-51

6. To tighten the belt, feed the shoulder belt back into

the retractor while you push down on the child restraint. You may find it helpful to use your knee to push down on the child restraint as you tighten the belt.

7. Push and pull the child restraint in different

directions to be sure it is secure.

To remove the child restraint, just unbuckle the vehicle’s safety belt and let it go back all the way. The safety belt will move freely again and be ready to work for an adult or larger child passenger.

1-52

Supplemental Restraint System (SRS) This part explains the Supplemental Restraint System (SRS) or air bag system. Your vehicle has air bags - one air bag for the driver and another air bag for the right front passenger. Frontal air bags are designed to help reduce the risk of injury from the force of an inflating air bag. But these air bags must inflate very quickly to do their job and comply with federal regulations. Here are the most important things to know about the air bag system:

You can be severely injured or killed in a crash if you aren’t wearing your safety belt - even if you have air bags. Wearing your safety belt during a crash helps reduce your chance of hitting things inside the vehicle or being ejected from it. Air bags are designed to work with safety belts, but don’t replace them. Air bags are designed to work only in moderate to severe crashes where the front of your vehicle hits something. They aren’t designed to inflate at all in rollover, rear or low-speed frontal crashes, or in many side crashes. And, for some unrestrained occupants, air bags may provide less protection in frontal crashes than more forceful air bags have provided in the past. Everyone in your vehicle should wear a safety hp!t prnperly - whether nr not there’s an air bag for that person.

1-53

Air bags inflate with great force, faster than the blink of an eye. If you’re too close to an inflating air bag, as you would be if you were leaning forward, it could seriously injure you. Safety belts help keep you in position before and during a crash. Always wear your safety belt, even with air bags. The driver should sit as far back as possible while still maintaining control of the vehicle.

Anyone who is up against, or very close to, any air bag when it inflates can be seriously injured or killed. Air bags plus lap-shoulder belts offer the best protection for adults, but not for young children and infants. Neither the vehicle’s safety belt system nor its air bag system is designed for them.Young children and infants need the protection that a child restraint system can provide. Always secure children properly in your vehicle. To read how, see the parts of this manual called “Older Children” and “Infants and Young Children”.

1 -54

AIR BAG

There is a air bag readiness light on the instrument panel, which shows AIR BAG.

Where Are the Air Bags?

The system checks the air bag electrical system for malfunctions. The light tells you if there is an electrical problem. See Air Bag Readiness Light on page 3-25.

The driver’s air bag is in the middle of the rtnnrinn t r r h n n l U L ” ” ,

I , ‘y “ “ I I””,.

1-55

If something is between an occupant and an air bag, the bag might not inflate properly or it might force the object into that person causing severe injury or even death. The path of an inflating air bag must be kept clear. Don’t put anything between an occupant and an air bag, and don’t attach or put anything on the steering wheel hub or on or near any other air bag covering.

When Should an Air Bag Inflate?

An air bag is designed to inflate in moderate to severe frontal or near-frontal crashes. The air bag will inflate only if the impact speed is above the system’s designed “threshold level”. If your vehicle goes straight into a wall that doesn’t move or deform, the threshold level is about 9 to 14 mph (14 to 23 km/h). The threshold level can vary, however, with specific vehicle design, so that it can be somewhat above or below this range.

The right front passenger’s air bag is in the instrument panel on the passenger’s side.

1-56

if your vehicle strikes something that will move or deform, such as a parked car, the threshold level will be higher. The air bag is not designed to inflate in rollovers, rear impacts, or in many side impacts because inflation would not help the occupant. In any particular crash, no one can say whether an air bag should have inflated simply because of the damage to a vehicle or because of what the repair costs were. Inflation is determined by the angle of the impact and how quickly the vehicle slows down in frontal and near-frontal impacts.

What Makes an Air Bag Inflate?

How Does an Air Bag Restrain? In moderate to severe frontal or near-frontal collisions, even belted occupants can contact the steering wheel or the instrument panel. Air bags supplement the protection provided by safety belts. Air bags distribute the force of the impact more evenly over the occupant's upper body, stopping the occupant more gradually. But air bags would not help you in many types of collisions, including rollovers, rear impacts and many side impacts, primarily because an occupant's motion is not toward those air bags. Air bags should never be regarded as anything more than a supplement to safety belts, and then only in moderate to severe frontal or near-frontal collisions.

In an impact of sufficient severity, the air bag sensing system detects that the vehicle is in a crash. The sensing system triggers a release of gas from the inflator, which inflates the air bag. The inflator, air bag and related hardware are all part of the air bag modules inside the steering wheel and in the instrument panel :- $*--+ I I I I I W I I L V I L I I C I I Y I I L I I W I I L p a c m r ; r ~ y ~ ~ .

,$ +he -:ah& $ w e - +

- - - - _ - . - _ c

1-57

What Will You See After an Air Bag Inflates?

After an air bag inflates, it quickly deflates, so quickly that some people may not even realize the air bag inflated. Some components of the air bag module - the steering wheel hub for the driver’s air bag or the instrument panel for the right front passenger’s bag - will be hot for a short time. The parts of the bag that come into contact with you may be warm, but not too hot to touch. There will be some smoke and dust coming from the vents in the deflated air bags. Air bag inflation doesn’t prevent the driver from seeing or being able to steer the vehicle, nor does it stop people from leaving the vehicle.

1-58

When an air bag inflates, there is dust in the air. This dust could cause breathing problems for people with a history of asthma or other breathing trouble. To avoid this, everyone in the vehicle should get out as soon as it is safe to do so. If you have breathing problems but can’t get out of the vehicle after an air bag inflates, then get fresh air by opening a window or a door.

In many crashes severe enough to inflate an air bag, windshields are broken by vehicle deformation. Additional windshield breakage may also occur from the right front passenger air bag.

Air bags are designed to inflate only once. After an air bag inflates, you’ll need some new parts for your air bag system. If you don’t get them, the air bag system won’t be there to help protect you in another crash. A new system will include air bag modules and possibly other parts. The service manual for your vehicle covers the need to replace other parts.

Your vehicle is equipped with a crash sensing and diagnostic module, which records information about the air bag system. The module records information about the readiness of the system, when the system commands air bag inflation and driver’s safety belt usage at deployment. Let only qualified technicians work on your air bag system. Improper service can mean that your air bag system won’t work properly. See your dealer for service.

Notice: If you damage the covering for the driver’s or the right front passenger’s air bag, the bag may not work properly. You may have to replace the air bag module in the steering wheel or both the air bag module and the instrument panel for the right front passenger’s air bag. Do not open or break the air bag coverings. Servicing Your Air Bag-Equipped Vehicle Air bags affect how your vehicle should be serviced. There are parts of the air bag system in several places around your vehicle. You don’t want the system to inflate white someone is working on your vehicle.

Your dealer and the service manual have information about servicing your vehicle and the air bag system. To purchase a service manual, see Service Publications Ordering Information on page 7-9.

For up to 10 minutes after the ignition key is turned off and the battery is disconnected, an air bag can still inflate during improper service. You can be injured if you are close to an air bag when it inflates. Avoid wires wrapped with yellow tape or yellow connectors. They are probably part of the air bag system. Be sure to follow proper service procedures, and make sure the person performing work for you is qualified to do so.

The air bag system does not need regular maintenance.

1-59

Restraint System Check

Checking Your Restraint Systems Now and then, make sure the safety belt reminder light and all your belts, buckles, latch plates, retractors and anchorages are working properly. Look for any other loose or damaged safety belt system parts. If you see anything that might keep a safety belt system from doing its job, have it repaired. Torn or frayed safety belts may not protect you in a crash. They can rip apart under impact forces. If a belt is torn or frayed, get a new one right away. Also look for any opened or broken air bag covers, and have them repaired or replaced. (The air bag system does not need regular maintenance.)

Replacing Restraint System Parts After a Crash

A crash can damage the restraint systems in your vehicle. A damaged restraint system may not properly protect the person using it, resulting in serious injury or even death in a crash. To help make sure your restraint systems are working properly after a crash, have them inspected and any necessary replacements made as soon as possible.

1-60

If your seat adjuster won’t work after a crash, the special part of the safety belt that goes through the seat to the adjuster may need to be replaced. If an air bag inflates, you’ll need to replace air bag system park. See Supplemental Restraint System (SRS) on page 1-53.

If you’ve had a crash, do you need new belts or LATCH system parts? After a very minor collision, nothing may be necessary. But if the belts were stretched, as thev would be if worn during a more severe crash, the; you need new parts. If the LATCH system was being used during a more severe crash, you may need new LATCH system parts. If belts are cut or damaged, replace them. Collision damage also may mean you will need to have LATCH system, safety belt or seat parts repaired or replaced. New parts and repairs may be necessary even if the belt or LATCH system wasn’t being used at the time of the collision.

1-61

Section 2

Features and Controls

Keys ..............................................................

-2-2 Remote Keyless Entry System ......................... 2.3 Remote Keyless Entry System Operation .......... -2-4 Qoors and Locks ............................................. 2-7 Door Locks .................................................... 2-7 Power Door Locks .......................................... 2-8 Delayed Locking ............................................. 2-8 Programmable Automatic Door Locks ................ 2-8 Rear Door Security Locks .............................. 2-10 Lockout Protection ........................................ 2-11 Leaving Your Vehicle .................................... 2-1 1 Trunk .......................................................... 2-12 Windows ........................................................ 2-15 Manual Windows .......................................... 2-15 Power Windows ............................................ 2-16 Sun Visors ................................................... 2-16 Theft-Deterrent Systems .................................. 2-17 2-17 Starting and Operating Your Vehicle ................ 2-18 New Vehicle Break-In .................................... 2-18 Ignition Positions .......................................... 2-18

.................................................

Passlock@

Starting Your Engine ..................................... 2.19 Engine Coolant Heater .................................. 2.22 Automatic Transaxle Operation ....................... 2.24 Transaxle Operation .......................... -2-27 Manual Brake .............................................. 2.29 Parking Into Park (P) ..................................... 2.30 Shifting Out of Park (P) ................................. 2.32 Shifting Your VehiclelKey Removal .................. 2.32 Parking Over Things That Burn ....................... 2-33 Parking Engine Exhaust ............................................ 2-33 Running Your Engine While You Are Parked .... 2-34 Mirrors ........................................................... 2-35 Manual Rearview Mirror ................................. 2.35 Outside Remote Control Mirror ....................... 2.35 Outside Power Mirrors ................................... 2.36 Outside Convex Mirror ................................... 2.36 Storage Areas ................................................ 2.37 Glove Box ................................................... 2.37 n . .-L.IA.. UUpl I U I U G I (3) Center Console Storage Area ......................... 2.37 Sunroof ......................................................... 2-38

................................................

137

L . U I

f.\

2- 1

Keys

Leaving children in a vehicle with the ignition key is dangerous for many reasons. A child or others could be badly injured or even killed. They could operate the power windows or other controls or even make the vehicle move. Don't leave the keys in a vehicle with children.

2-2

One key is used for the ignition and all locks.

When a new vehicle is delivered, the key has a bar-coded key tag. This tag may be removed by your dealer before it is delivered. Each tag has a key code on it that tells your dealer or a qualified locksmith how to make extra keys. Keep the tag in a safe place. If you lose your keys, you’ll be able to have one made easily using this tag. If you need ‘)I n n \ h t bnx! m n tn I I n r l r rlnqlnr fzy t h ~ y r y e ~ t kn\r cndn u I See Roadside Assistance Program on page 7-5 for more information.

I U Y V i \ u y , y u L”

y v u , U”Ul”l

”‘J

Notice: Your vehicle has a number of new features that can help prevent theft. You can have a lot of trouble getting into your vehicle if you ever lock your keys inside. You may even have to damage your vehicle to get in. So be sure you have spare keys. Remote Keyless Entry System If equipped, the keyless entry system operates on a radio frequency subject to Federal Communications Commission (FCC) Rules and with Industry Canada. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. This device must accept any interference received,

including interference that may cause undesired operation of the device.

This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions:

T I . ! - ^ I - . . : - -

I I 113 u e v t ~ e 1 1 ~dy I l u t L ~ U ~ G

I . 2. This device must accept any interference received,

.--A

:.-*-.A ^_^I^^ 1 1 I ~ ~ ; I I G I GI ILG, a1 IU

- - A

--..--

including interference that may cause undesired operation of the device.

2-3

Changes or modifications to this system by other than an authorized service facility could void authorization to use this equipment. At times you may notice a decrease in range. This is normal for any remote keyless entry system. If the transmitter does not work or if you have to stand closer to your vehicle for the transmitter to work, try this:

Check the distance. You may be too far from your vehicle. You may need to stand closer during rainy or snowy weather. Check the location. Other vehicles or objects may be blocking the signal. Take a few steps to the left or right, hold the transmitter higher, and try again. Check to determine if battery replacement is necessary. See “Battery Replacement” under Remote Keyless Entry System Operation on page 2-4. If you are still having trouble, see your dealer or a qualified technician for service.

2-4

Remote Keyless Entry System Operation

If your vehicle has this feature, you can lock and unlock your doors or unlock your trunk from about 3 feet (1 m) up to 30 feet (9 m) away using the remote keyless entry transmitter supplied with your vehicle.

The following functions are available with the keyless entry system:

8 (Lock): All doors will automatically lock when this button on the transmitter is pressed. The interior lamps will turn off after all of the doors are closed. If all of the doors are closed, the parking lamps will flash twice and the horn will chirp to indicate locking has occurred.

(Unlock): The driver's door will unlock

gf automatically when this button on the transmitter is pressed. If the button is pressed again within five seconds, all remaining doors will unlock. The interior lamps will stay on for 10 seconds or until the ignition is turned on. The parking lamps will flash twice to indicate unlocking has occurred.

(Remote Trunk Release): The trunk will unlock transmitter is pressed,

when the vehicle symbol on the as long as the trunk lockout is not engaged. You can open the trunk with the transmitter when the vehicle speed is less than 2 mph (3 km/h), when the parking brake is engaged, or when the ignition is off. The interior lamps will come on for 10 seconds or until the ignition switch is turned to ON. & (Horn): The horn will sound and the headlamps and the parking lamps will flash for up to two minutes when the horn symbol on the transmitter is pressed. The interior lamps will come on and remain on while the horn is sounding and the lamps are flashing. The horn and lamps can be turned off by pressing the horn symbol button again or by turning the ignition to ON.

Programmable Horn Chirp When you use the remote keyless entry transmitter to lock the doors or use the delayed locking feature the parking lamps will flash and the horn will chirp. The programmable horn chirp can be disabled by pressing and holding either of the door lock switches in the unlock position for 10 seconds with the ignition ON and all of the doors closed. When you hear the horn chirp, programming is complete. To reactivate the horn chirp feature, repeat the above procedure. Matching Transmitter(s) to Your Vehicle Each remote keyless entry transmitter is coded to prevent another transmitter from unlocking your vehicle. If a transmitter is lost or stolen, a replacement can be purchased through your dealer. Remember to bring -n\t r n r n - i n i n m tmncmittnrc with \In1 I wh@n \In[ 1 nn 10 u l l y I U I your dealer. When the dealer matches the replacement transmitter to your vehicle, any remaining transmitters must also be matched. Once your dealer has coded the new transmitter, the lost transmitter will not unlock your vehicle. Each vehicle can have a maximum of four transmitters matched to it.

..., , I - -

I - - ' J -

.,.-

l y L a - ,

I ~ l

l Y I

2-5

Battery Replacement Under normal use, the battery in your remote keyless entry transmitter should last about four years. You can tell the battery is weak if the transmitter won’t work at the normal range in any location. If you have to get close to your vehicle before the transmitter works, it’s probably time to change the battery. Notice: When replacing the battery, use care not to touch any of the circuitry. Static from your body transferred to these surfaces may damage the transmitter.

2-6

To replace the battery in the remote keyless entry transmitter do the following: 1. Use a flat object like a coin to separate the bottom

half from the top half of the transmitter.

2. Remove the battery and replace it with the new one. Make sure the positive side of the battery faces up. Use one three-volt, CR2032, or equivalent, type battery.

3. Put the two halves back together. Make sure the

cover is on tightly, so water won’t get in.

Doors and Locks

There are several ways to lock and unlock your vehicle. From the outside, use your key or remote keyless entry system, if your vehicle is equipped with this feature. If your vehicle has remote keyless entry, you can only use your key to unlock the driver’s side door

Unlocked doors can be dangerous.

Passengers - especially children - can easily open the doors and fall out of a moving vehicle. When a door is locked, the handle won’t open it. You increase the chance of being thrown out of the vehicle in a crash if the doors aren’t locked. So, wear safety belts properly and lock the doors whenever you drive. Young children who get into unlocked vehicles may be unable to get out. A child can be overcome by extreme heat and can SIJffer permanent injuries or even death from heat stroke. Always lock your vehicle whenever you leave it. Outsiders can easily enter through an unlocked door when you slow down or stop your vehicle. Locking your doors can heip prevent this from happening.

2-7

Power Door Locks With the power door locks, you can lock or unlock all of the doors on your vehicle using the driver’s or front passenger’s door lock switch. Press the bottom of the switch to lock all of the doors. Press the top of the switch to unlock all of the doors. Delayed Locking This feature will allow the driver to delay the actual locking of the vehicle. This feature will not operate if the key is left in the ignition. See Lockout Protection on page 2- I 1. When LOCK on the driver’s power door lock switch is pressed, with the key removed from the ignition and the driver’s door open, three chimes will be heard. The doors will not lock. Seven seconds after the driver’s door has been closed, all of the doors will lock and the parking lamps will flash. The horn will also chirp if the horn chirp feature is enabled. See “Programmable Horn Chirp” previously for more information. If the driver opens another door before the seven seconds, the doors will not lock until seven seconds after the last door is closed.

If the power door lock switch is pressed to LOCK twice when leaving the vehicle, or the LOCK button on the remote keyless entry transmitter is pressed, the doors will lock immediately. If the power door lock switch is pressed to unlock, the doors will not lock automatically. Programmable Automatic Door Locks Just close the doors and turn on the ignition. All of the doors will lock when you move the shift lever out of PARK (P) to REVERSE (R) on vehicles with an automatic transaxle. All of the doors will lock when the vehicle speed is greater than 5 mph (8 km/h) on vehicles with a manual transaxle. If someone needs to get out while the vehicle is running, have that person use the door lock. When the door is closed again, it will lock automatically when the vehicle reaches about 5 mph (8 km/h). All doors will automatically unlock when the shift lever is moved to PARK (P) on vehicles with an automatic transaxle or to REVERSE (R) on vehicles with a manual transaxle and the key is turned to OFF.

2-8

Customizing the Automatic Door Locks One of four operating modes may be selected and programmed by the driver on vehicles with an automatic transaxle: e Mode 1: All doors automatically lock when the

transaxle is shifted out of PARK (P). The doors will remain locked unless manually unlocked or the lock button is pressed. All doors will unlock when the transaxle is shifted into PARK (P) and the key is turned to OFF.

* Mode 2: This mode is only available on vehicle’s equipped with a remote keyless entry transmitter. All doors automatically lock when the transaxle is shifted out of PARK (P). Only the driver’s door will unlock when the transaxle is shifted into PARK (P) and the key is turned to OFF.

e Mode 3: All doors automatically lock when the

transaxle is shifted out of PARK (P). No automatic door unlock.

e \dl& 4: !V\lrr g.~!t~mstic. dinr in& or I-rnlnck

One of the four operating modes may be selected and programmed by the driver on vehicles with a manual transaxle:

Mode 1: All doors automatically lock when the vehicle speed is greater than 5 mph (8 km/h). The doors will remain locked unless manually unlocked or the lock button is pressed. All doors will unlock when the transaxle is shifted into REVERSE (R) and the key is turned to OFF. Mode 2: This mode is only available on vehicle’s equipped with a remote keyless entry transmitter. All doors automatically lock when the vehicle speed is greater than 5 mph (8 km/h). Only the driver’s door will unlock when the transaxle is shifted into REVERSE (R) and the key is turned to OFF. Mode 3: All doors automatically lock when the vehicle speed is greater than 5 mph (8 km/h No automatic door unlock. Mode 4: No automatic door lock or unlock.

2-9

Before your vehicle was shipped from the factory it was programmed in Mode 1. To determine the current mode or to change to a different mode, do the following: 1. Put an automatic transaxle in PARK (P) or a

manual transaxle in REVERSE (R) with the parking brake engaged and turn the ignition to ON.

2. Press and hold LOCK on the power door lock

switch for 10 seconds. Release the switch when you hear the chime.

3. Count the number of chimes you hear. The number

of chimes tells you which mode your vehicle is in. You can change the mode by pressing and holding LOCK on the power door lock switch (two chimes for Mode 2, three chimes for Mode 3 and four chimes for Mode 4).

4. Repeat Step 2 until you hear the number of chimes

that matches the mode you want.

The mode you selected is now set.

2-1 0

Rear Door Security Locks If your vehicle is a four-door model, it has rear door security locks that help prevent passengers from opening the rear doors from the inside.

The switch is located on the inside of the rear door.

To use the security locks, do the following:

1. Move the switch up. 2. Close the door. 3. Do the same thing to the other rear door.

The rear doors on your vehicle cannot be opened from the inside when this feature is in use. If you want to open a rear door when the security lock is on, do the following: 1. Unlock the door from the inside. 2, Then open the door from the outside. If you don’t cancel the security lock feature, adults or older children who ride in the rear won’t be able to open the rear door from the inside. You should let adults and older children know how these security locks work, and how to cancel the locks. To cancel a rear door lock, do the following: 1. Unlock the door from the inside and open it from

the outside.

2. Move the switch down. 3. Do the same to the other rear door. The rear doors will now work normally.

Lockout Protection Lockout protection is a standard feature intended to provide enhanced security and convenience. This feature prevents a driver who has left the keys in the ignition from locking the doors or using the power door locks while any door is open. To override this feature, when the key is in the ignition and a door is open, hold the power door lock switch for three seconds. This feature cannot guarantee that you will never be locked out of your vehicle. If you don’t leave the keys in the ignition, or if you use the manual door lock, or if you use the remote keyless entry transmitter (if