You may also be interested in...

2008 Nissan Titan Owners Manual

Download PDF Manual

Z REVIEW COPY—2008 Titan (tzw) Owners Manual—USA_English (nna) 10/11/07—debbie X


LHA0554


LHA0555


LHA0556


Maintenance items Press the TRIP button to display maintenance information or set maintenance intervals for the following: c Engine Oil c Tire Rotation c Tire Pressure (if so equipped) For setting the Tire Pressure display, refer to (cid:147)Tire pressure information(cid:148) later in this section.


Changing the maintenance interval Select the (cid:147)Engine Oil(cid:148) or (cid:147)Tire Rotation(cid:148) key using the joystick and press the ENTER button to display the screen to change the maintenance interval. Select the (cid:147)Maintenance Schedule(cid:148) key using the joystick and move the joystick to right or left to set the maintenance interval.


Resetting the maintenance interval The ENGINE OIL and TIRE ROTATION mainte- nance intervals can be reset to 0 miles (kilome- ters). Select the (cid:147)Reset(cid:148) key using the joystick and press the ENTER button.


Display screen, heater, air conditioner, audio and phone systems 4-5


Z REVIEW COPY—2008 Titan (tzw) Owners Manual—USA_English (nna) 10/11/07—debbie X


c The ignition key is turned ON the next time


the vehicle will be driven.


To return to the previous display after the MAIN- TENANCE NOTICE screen is displayed, press the BACK button. The MAINTENANCE NOTICE screen displays each time the key is turned ON until one of the following conditions are met: c (cid:147)Reset(cid:148) key is selected. c (cid:147)Display Maintenance Notification(cid:148) is set to


OFF.


c The maintenance interval is set again.


LHA0483
Displaying the maintenance notice re- minder


Select the (cid:147)Display Maintenance Notification(cid:148) key and press the ENTER button to display the MAINTENANCE INFORMATION automatically at the set maintenance interval.


The MAINTENANCE NOTICE screen (ENGINE OIL and TIRE ROTATION) will be automatically displayed as shown when both of the following conditions are met: c The vehicle is driven the set distance and the


ignition key is turned OFF.


LHA0557


Tire pressure information To display tire pressure information, press the TRIP button repeatedly until the MAINTENANCE screen is displayed. Select the (cid:147)Tire Pressure(cid:148) key using the joystick and press the ENTER but- ton.


Pressure indication in ** psi on the screen indi- cates that the pressure is being measured. After a few driving trips, the pressure for each tire will be displayed randomly.


The order of tire pressure figures displayed on the screen does not correspond with the actual order of the tire position.


4-6 Display screen, heater, air conditioner, audio and phone systems


Z REVIEW COPY—2008 Titan (tzw) Owners Manual—USA_English (nna) 10/11/07—debbie X


Tire pressure rises and falls depending on the heat caused by the vehicle(cid:146)s operation and the outside temperature. In case of low tire pressure, a message is dis- played on the screen: LOW PRESSURE (cid:151) Check All Tires.


WARNING


c When a spare tire is mounted or a wheel is replaced, tire pressure will not be indicated, the Tire Pressure Monitoring System (TPMS) will not function and the low tire pressure warning light will flash for approximately 1 minute. The light will remain on after 1 minute. Con- tact your NISSAN dealer as soon as possible for tire replacement and/or system resetting.


c Replacing tires with those not originally specified by NISSAN could affect the proper operation of the TPMS.


LHA0558


WHA0855


HOW TO USE THE SETTING BUTTON When the SETTING button is pressed, the SET- TINGS screen will appear on the display. You can select and/or adjust several functions, features and modes that are available for your vehicle. Move the joystick and press the ENTER button to select each item to be set.


Display settings Select the (cid:147)Display(cid:148) key and press the ENTER button. The DISPLAY SETTINGS screen will ap- pear.


Display screen, heater, air conditioner, audio and phone systems 4-7


Z REVIEW COPY—2008 Titan (tzw) Owners Manual—USA_English (nna) 10/11/07—debbie X


To turn the screen on, c Press the SETTING button and select the (cid:147)Display(cid:148) key and then select the (cid:147)Display Off(cid:148) key. Then set the screen to on by press- ing the ENTER button, or


c Hold the


button for approximately 2
seconds and the message (cid:147)resuming dis- play(cid:148) will appear and the (cid:147)Display Off(cid:148) key will be automatically turned on (no amber indicator).


WHA0716


LHA0642


Brightness/contrast: Select the (cid:147)Brightness/Contrast(cid:148) key to adjust the brightness and contrast of the map back- ground. Use the joystick to adjust the brightness to darker or brighter and the contrast to lower or higher. The new settings are automatically saved when you exit the setting screen by pressing the BACK button or any other mode button.


Display off: Select the (cid:147)Display Off(cid:148) key. The indicator of the (cid:147)Display Off(cid:148) turns amber and the message above will be displayed briefly. When the audio, HVAC (Heater and air conditioner), or any mode button on the control panel is operated, the dis- play turns on for that operation. If one of the control panel buttons is pressed, the display will not automatically turn off until that operation is finished. Otherwise, the screen turns off auto- matically after 5 seconds.


4-8 Display screen, heater, air conditioner, audio and phone systems


Z REVIEW COPY—2008 Titan (tzw) Owners Manual—USA_English (nna) 10/11/07—debbie X


NOTE: If you change the horn beep or the lamp flash feature with the keyfob, the display screen will not show the current mode. Use the keyfob to return to the previous mode and re-enable the display screen control. Keyless remote response (cid:151) lights: Select to turn on or turn off the hazard indicator flash mode used when the LOCK or UNLOCK button on the keyfob is pressed.


NOTE: If you change the horn beep or the lamp flash feature with the keyfob, the mode will not be changed with the display. Use the keyfob to return to the previous mode and re-enable the display control. Auto re-lock time: Select to set the length of time before doors automatically re-lock. Sensitivity of automatic headlights: Select to change the sensitivity setting of the automatic headlights: c Lower: less sensitive, automatic headlights will take longer to come on when the head- light sensor senses less ambient light.


WHA0856


Vehicle electronic systems Select the (cid:147)Vehicle Electronic Systems(cid:148) key by using the joystick and pressing the ENTER but- ton. The VEHICLE ELECTRONIC SYSTEMS screen will be displayed. You can set the following operating conditions by selecting the desired item using the joystick, then pressing the ENTER button. The indicator light, box at the left of the selected item, alternately turns on and off each time the ENTER button is pressed. Indicator light is illuminated (cid:151) ON Indicator light is not illuminated (cid:151) OFF


WHA0857
Remote unlock driver(cid:146)s door first: Select to change which doors will unlock first during an unlocking operation: Only the driver(cid:146)s door ˆ! All the doors Keyless remote response (cid:151) horn: Select to turn on or turn off the horn chirp mode used when the LOCK button on the keyfob is pressed.


Display screen, heater, air conditioner, audio and phone systems 4-9


Z REVIEW COPY—2008 Titan (tzw) Owners Manual—USA_English (nna) 10/11/07—debbie X


You can select the language and unit using the joystick or pressing the ENTER button. The settings are automatically saved when you exit the menu by pressing the BACK button or any other mode button.


c Higher: more sensitive, automatic headlights will come on quicker when the headlight sensor senses less ambient light.


Automatic headlights off delay: Select to change the setting for the length of time the automatic headlights remain on after exiting the vehicle. Speed dependent wiper: Select to turn on or turn off the driving speed dependent intermittent wiper function. Return all settings to default: Select to change all VEHICLE ELECTRONICS SYSTEMS to their default settings.


LHA0561


System settings Select the (cid:147)System Settings(cid:148) key by using the joystick and pressing the ENTER button. The SYSTEM SETTINGS screen will be displayed. Language/unit


The LANGUAGE/UNIT screen will appear when selecting the (cid:147)Language/Unit(cid:148) key and pressing the ENTER button.


Language: English or French


Unit: US (cid:151) mile, (cid:176)F, MPG


Metric (cid:151) km, (cid:176)C, L/100 km


4-10 Display screen, heater, air conditioner, audio and phone systems


Z REVIEW COPY—2008 Titan (tzw) Owners Manual—USA_English (nna) 10/11/07—debbie X


LHA0562


LHA0566


LHA0567


Clock Adjusting the time: Select the (cid:147)Hours(cid:148) or (cid:147)Minutes(cid:148) key and move the joystick to the right or left to adjust the time. The time will change step by step. The new settings are automatically saved when you exit the setting screen by pressing the BACK button or any other mode button.


Setting daylight savings time: Use the (cid:147)Daylight Saving Time(cid:148) key to adjust the clock to daylight savings time. ON: Automatically adjusts for daylight savings time. OFF: The current time is displayed.


Adjusting the time to the GPS: Select the (cid:147)Auto Adjust(cid:148) key. The time will be reset to the GPS time.


Display screen, heater, air conditioner, audio and phone systems 4-11


Z REVIEW COPY—2008 Titan (tzw) Owners Manual—USA_English (nna) 10/11/07—debbie X


The GPS time (manual time) corresponding to the selected zone will be displayed. Pacific zone has been set as the initial (default) setting. Beep setting With this option ON, a beep will sound if any audio button is pressed. Navigation settings Refer to the separate Navigation System Own- er(cid:146)s Manual for information regarding these set- tings. Guidance voice settings Refer to the separate Navigation System Own- er(cid:146)s Manual for information regarding these set- tings.


BUTTON


To change the display brightness, press the button. Pressing the button again will change the display to (cid:147)DAY(cid:148) or (cid:147)NIGHT(cid:148) display. Then, adjust the brightness by moving the joy- stick right or left. If no operation is done within 10 seconds, or if the BACK button is pressed, the display will return to the previous display.


Selecting the time zone: 1. Select the (cid:147)Select Time Zone(cid:148) key. The TIME ZONE screen will appear.


LHA0568


LHA0563
2. Select one of the following zones, depend-


ing on the current location. c Pacific zone c Mountain zone c Central zone c Eastern zone c Atlantic zone c Newfoundland zone


After selection, the CLOCK SETTINGS screen will appear.


4-12 Display screen, heater, air conditioner, audio and phone systems


Z REVIEW COPY—2008 Titan (tzw) Owners Manual—USA_English (nna) 10/11/07—debbie X


VENTILATORS


Adjust air flow direction for the driver and pas- senger side s1 , center s2 , and rear passenger (if so equipped) s3 ventilators by moving the venti- lator slide and/or ventilator assemblies.


HEATER AND AIR CONDITIONER (manual)


WARNING


c The air conditioner cooling function op- erates only when the engine is running. c Do not leave children or adults who would normally require the assistance of others alone in your vehicle. Pets should also not be left alone. They could accidentally injure themselves or others through inadvertent operation of the vehicle. Also, on hot, sunny days, temperatures in a closed vehicle could quickly become high enough to cause severe or possibly fatal injuries to people or animals.


c Do not use the recirculation mode for long periods as it may cause the interior air to become stale and the windows to fog up.


LHA0410


Display screen, heater, air conditioner, audio and phone systems 4-13


Z REVIEW COPY—2008 Titan (tzw) Owners Manual—USA_English (nna) 10/11/07—debbie X


Type A


WHA0870


Fan speed control dial Temperature control dial Air flow control dial Air conditioner button Air recirculation button


1. 2. 3. 4. 5. CONTROLS Fan control dial The fan control dial turns the fan on and off, and controls fan speed.


Air flow control dial The air flow control dial allows you to select the air flow outlets. MAX A/C


(cid:151) Air flows from center and side


vents with maximum cooling (air conditioning).


(cid:151) Air flows from center and side


ventilators.


(cid:151) Air flows from center and side


ventilators and the front and rear floor outlets.


(cid:151) Air flows mainly from the front


and rear floor outlets.


(cid:151) Air flows from defroster outlets


and the front and rear floor outlets.


(cid:151) Air flows mainly from defroster


outlets.


The air flow control dial also has intermediate positions which allow the air flow to be distrib- uted between 2 of the icon positions on the air flow control dial. Temperature control dial The temperature control dial allows you to adjust the temperature of the outlet air. To lower the temperature, turn the dial to the left. To increase the temperature, turn the dial to the right.


Air recirculation button


ON position: Push the the vehicle.


button to recirculate air inside


button to the on position when:


Push the c driving on a dusty road. c to prevent traffic fumes from entering pas-


senger compartment.


4-14 Display screen, heater, air conditioner, audio and phone systems


Z REVIEW COPY—2008 Titan (tzw) Owners Manual—USA_English (nna) 10/11/07—debbie X


c for maximum cooling when using the air con-


ditioner.


OFF position: Push the button again to turn air recircula- tion off. Outside air is drawn into the passenger compartment and distributed through the se- lected outlet.


Use the off position for normal heater or air con- ditioner operation.


Air conditioner button


Start the engine, turn the fan control dial to the desired position and push the button to turn on the air conditioner. The indicator light comes on when the air conditioner is operating. To turn off the air conditioner, push the button again. The air conditioner cooling function oper- ates only when the engine is running. HEATER OPERATION Heating This mode is used to direct heated air to the foot outlets. Some air also flows from the defrost outlets.


1. Push the


button to the OFF position for normal heating. The indicator light on the


button will go off.


1. Turn the air flow control dial to the


position.


2. Turn the fan control dial to the desired posi-


2. Turn the air flow control dial to the


tion.


position.


3. Turn the fan control dial to the desired posi-


tion.


4. Turn the temperature control dial to the de- sired position between the middle and the hot position.


Ventilation This mode directs outside air to the side and center ventilators. 1. Push the


button to the OFF position. button will


The indicator light on the go off.


2. Turn the air flow control dial to the


position.


3. Turn the fan control dial to the desired posi-


tion.


4. Turn the temperature control dial to the de-


sired position.


Defrosting or defogging This mode directs the air to the defrost outlets to defrost/defog the windows.


3. Turn the temperature control dial to the de- sired position between the middle and the hot position.


c To quickly remove ice or fog from the win- dows, turn the fan control dial to 4 and the temperature control lever to the full HOT position. c When the


position is selected, the air conditioner automatically turns on (however, the indicator light on the button will not come on) if the outside temperature is more than 36(cid:176)F (2(cid:176)C). If in defrost mode for more than one minute, the air conditioning system will continue to operate until the ve- hicle is shut off, or the A/C button is used to turn off the compressor even if the air flow control dial is turned to a position other than the position. This dehumidifies the air which the windshield. The mode automatically turns off, al- lowing outside air to be drawn into the pas- senger compartment to further improve the defogging performance.


defog


helps


Display screen, heater, air conditioner, audio and phone systems 4-15


Z REVIEW COPY—2008 Titan (tzw) Owners Manual—USA_English (nna) 10/11/07—debbie X


Bi-level heating The bi-level mode directs warmed air to the side and center vents and to the front and rear floor outlets. 1. Push the


button to the OFF position. button will


The indicator light on the go off.


2. Turn the air flow control dial to the


position.


3. Turn the fan control dial to the desired posi-


tion.


4. Turn the temperature control dial to the de-


sired position.


Heating and defogging This mode heats the interior and defogs the wind- shield. 1. Turn the air flow control dial to the


position.


2. Turn the fan control dial to the desired posi-


tion.


3. Turn the temperature control dial to the de- sired position between the middle and the hot position.


c When the


position is selected, the air conditioner automatically turns on (however, the indicator light on the button will not come on) if the outside temperature is more than 36(cid:176)F (2(cid:176)C). If in defrost mode for more than one minute, the air conditioning system will continue to operate until the fan control dial is turned to OFF or the vehicle is shut off, or the A/C button is used to turn off the compressor even if the air flow control dial than position. This dehumidifies the air the which the windshield. The mode automatically turns off, al- lowing outside air to be drawn into the pas- senger compartment to further improve the defogging performance.


is turned to a position other


defog


helps


Operating tips Clear snow and ice from the wiper blades and air inlet in front of the windshield. This improves heater operation. AIR CONDITIONER OPERATION Start the engine, turn the fan control dial to the desired position, and push in the button to activate the air conditioner. When the air condi- tioner is on, cooling and dehumidifying functions are added to the heater operation.


The air conditioner cooling function oper- ates only when the engine is running. Cooling This mode is used to cool and dehumidify the air. 1. Push the button to the OFF position. 2. Turn the air flow control dial to the


position.


3. Turn the fan control dial to the desired posi-


tion.


4. Push the


on the


button. The indicator light


button will come on.


5. Turn the temperature control dial to the de-


sired position.


c For quick cooling when the outside tem- button to light on button will come on. Be sure to to the OFF position for nor-


perature is high, push the the ON position. The indicator the return the mal cooling. The indicator light on the button will go off. You may also select MAX A/C for quick cooling.


4-16 Display screen, heater, air conditioner, audio and phone systems


Z REVIEW COPY—2008 Titan (tzw) Owners Manual—USA_English (nna) 10/11/07—debbie X


Dehumidified heating This mode is used to heat and dehumidify the air. 1. Push the button to the OFF position. button will


The indicator light on the go off.


2. Turn the air flow control dial to the


position.


3. Turn the fan control dial to the desired posi-


tion.


4. Push the


light on the


button on. The indicator button will come on.


5. Turn the temperature control dial to the de-


sired position. Operating tips c Keep the windows closed while the air con-


ditioner is in operation.


c The air conditioning system should be operated for approximately 10 minutes at least once a month. This helps pre- vent damage to the system due to lack of lubrication.


c A visible mist may be seen coming from the ventilators in hot, humid conditions as the air is cooled rapidly. This does not indicate a malfunction.


AIR FLOW CHARTS The following charts show the button and dial positions for MAXIMUM AND QUICK heating, cooling or defrosting. For additional information on heating and cooling see (cid:147)Heater and air con- ditioner(cid:148) in this section. The air recirculation ) button should always be in the OFF position for heating and defrosting.


c If


the engine coolant


temperature gauge indicates engine coolant tem- perature over the normal range, turn the air conditioner off. See (cid:147)If your vehicle overheats(cid:148) in the (cid:147)In case of emergency(cid:148) section of this manual.


c After parking in the sun, drive for 2 or 3
minutes with the windows open to vent hot air from the passenger compartment. Then, close the windows. This allows the air con- ditioner to cool the interior more quickly.


Display screen, heater, air conditioner, audio and phone systems 4-17


Z REVIEW COPY—2008 Titan (tzw) Owners Manual—USA_English (nna) 10/11/07—debbie X


4-18 Display screen, heater, air conditioner, audio and phone systems


Type A


Type A


WHA0871


WHA0872


Z REVIEW COPY—2008 Titan (tzw) Owners Manual—USA_English (nna) 10/11/07—debbie X


Type A


WHA0873


WHA0874


Display screen, heater, air conditioner, audio and phone systems 4-19


Type A


Z REVIEW COPY—2008 Titan (tzw) Owners Manual—USA_English (nna) 10/11/07—debbie X


4-20 Display screen, heater, air conditioner, audio and phone systems


Type A


WHA0875


Z REVIEW COPY—2008 Titan (tzw) Owners Manual—USA_English (nna) 10/11/07—debbie X


HEATER AND AIR CONDITIONER (manual)


WARNING


c The air conditioner cooling function op- erates only when the engine is running. c Do not leave children or adults who would normally require the assistance of others alone in your vehicle. Pets should also not be left alone. They could accidentally injure themselves or others through inadvertent operation of the vehicle. Also, on hot, sunny days, temperatures in a closed vehicle could quickly become high enough to cause severe or possibly fatal injuries to people or animals.


c Do not use the recirculation mode for long periods as it may cause the interior air to become stale and the windows to fog up.


Type B


LHA0876


Fan speed control dial Front window defroster button Rear window defroster button Air recirculation button Temperature control dial


1. 2. 3. 4. 5. 6. Max A/C button 7. 8. Fan control dial The fan control dial turns the fan on and off, and controls fan speed.


Air flow control buttons Air conditioner ON/OFF button


Air flow control dial The air flow control buttons allow you to select the air flow outlets. MAX A/C


(cid:151) Air flows from center and side


vents with maximum cooling (air conditioning).


(cid:151) Air flows from center and side


ventilators.


(cid:151) Air flows from center and side


ventilators and the front and rear floor outlets.


Display screen, heater, air conditioner, audio and phone systems 4-21


Z REVIEW COPY—2008 Titan (tzw) Owners Manual—USA_English (nna) 10/11/07—debbie X


(cid:151) Air flows mainly from the front


and rear floor outlets.


(cid:151) Air flows from defroster outlets


and the front and rear floor outlets.


Temperature control dial The temperature control dial allows you to adjust the temperature of the outlet air. To lower the temperature, turn the dial to the left. To increase the temperature, turn the dial to the right.


Air recirculation button


ON position: Push the the vehicle.


button to recirculate air inside


button to the on position when:


Push the c driving on a dusty road. c to prevent traffic fumes from entering pas-


senger compartment.


c for maximum cooling when using the air con-


ditioner.


Use the off position for normal heater or air con- ditioner operation.


Air conditioner button


Start the engine, turn the fan control dial to the desired position and push the button to turn on the air conditioner. The indicator light comes on when the air conditioner is operating. To turn off the air conditioner, push the button again. The air conditioner cooling function oper- ates only when the engine is running. HEATER OPERATION Heating This mode is used to direct heated air to the foot outlets. Some air also flows from the defrost outlets.


1. Push the


button to the OFF position for normal heating. The indicator light on the


button will go off.


2. Press the


air flow control button.


3. Turn the fan control dial to the desired posi-


OFF position: Push the button again to turn air recircula- tion off. Outside air is drawn into the passenger compartment and distributed through the se- lected outlet. 4-22 Display screen, heater, air conditioner, audio and phone systems


tion.


4. Turn the temperature control dial to the de- sired position between the middle and the hot position.


Ventilation This mode directs outside air to the side and center ventilators.


1. Push the


The indicator light on the go off.


button to the OFF position. button will


2. Press the


air flow control button.


3. Turn the fan control dial to the desired posi-


tion.


4. Turn the temperature control dial to the de-


sired position.


Defrosting or defogging This mode directs the air to the defrost outlets to defrost/defog the windows.


1. Turn the air flow control dial to the


position.


2. Turn the fan control dial to the desired posi-


tion.


3. Turn the temperature control dial to the de- sired position between the middle and the hot position.


Z REVIEW COPY—2008 Titan (tzw) Owners Manual—USA_English (nna) 10/11/07—debbie X


c To quickly remove ice or fog from the win- dows, turn the fan control dial to 4 and the temperature control lever to the full HOT position. c When the


position is selected, the air conditioner automatically turns on (however, the indicator light on the button will not come on) if the outside temperature is more than 36(cid:176)F (2(cid:176)C). If in defrost mode for more than one minute, the air conditioning system will continue to operate until the ve- hicle is shut off, or the A/C button is used to turn off the compressor even if the air flow control dial is turned to a position other than the position. This dehumidifies the air which the windshield. The mode automatically turns off, al- lowing outside air to be drawn into the pas- senger compartment to further improve the defogging performance.


defog


helps


Bi-level heating The bi-level mode directs warmed air to the side and center vents and to the front and rear floor outlets. 1. Push the


button to the OFF position. button will


The indicator light on the go off.


2. Press the


air flow control button.


3. Turn the fan control dial to the desired posi-


tion.


4. Turn the temperature control dial to the de-


sired position.


Heating and defogging This mode heats the interior and defogs the wind- shield.


1. Press the


air flow control button.


2. Turn the fan control dial to the desired posi-


tion.


3. Turn the temperature control dial to the de- sired position between the middle and the hot position.


lowing outside air to be drawn into the pas- senger compartment to further improve the defogging performance.


Operating tips Clear snow and ice from the wiper blades and air inlet in front of the windshield. This improves heater operation. AIR CONDITIONER OPERATION Start the engine, turn the fan control dial to the desired position, and push in the button to activate the air conditioner. When the air condi- tioner is on, cooling and dehumidifying functions are added to the heater operation. The air conditioner cooling function oper- ates only when the engine is running. Cooling This mode is used to cool and dehumidify the air.


c When the


position is selected, the air conditioner automatically turns on (however, the indicator light on the button will not come on) if the outside temperature is more than 36(cid:176)F (2(cid:176)C). If in defrost mode for more than one minute, the air conditioning system will continue to operate until the fan control dial is turned to OFF,r the vehicle is shut off, or the A/C button is used to turn off the compressor even if the air flow control dial than the position. This dehumidifies the air which the windshield. The mode automatically turns off, al- Display screen, heater, air conditioner, audio and phone systems 4-23


3. Turn the fan control dial to the desired posi-


is turned to a position other


button to the OFF position.


button. The indicator light


air flow control button.


button will come on.


2. Press the


4. Push the


1. Push the


on the


defog


helps


tion.


Z REVIEW COPY—2008 Titan (tzw) Owners Manual—USA_English (nna) 10/11/07—debbie X


5. Turn the temperature control dial to the de-


sired position.


c For quick cooling when the outside tem- button to light on button will come on. Be sure to to the OFF position for nor-


perature is high, push the the ON position. The indicator the return the mal cooling. The indicator light on the button will go off. You may also select MAX A/C for quick cooling. Dehumidified heating This mode is used to heat and dehumidify the air. 1. Push the button to the OFF position. button will


The indicator light on the go off.


2. Press the 3. Turn the fan control dial to the desired posi-


air flow control button.


tion.


4. Push the


light on the


button on. The indicator button will come on.


5. Turn the temperature control dial to the de-


sired position.


AIR FLOW CHARTS The following charts show the button and dial positions for MAXIMUM AND QUICK heating, cooling or defrosting. For additional information on heating and cooling see (cid:147)Heater and air con- ditioner(cid:148) in this section. The air recirculation ) button should always be in the OFF position for heating and defrosting.


Operating tips c Keep the windows closed while the air con-


ditioner is in operation.


c After parking in the sun, drive for 2 or 3
minutes with the windows open to vent hot air from the passenger compartment. Then, close the windows. This allows the air con- ditioner to cool the interior more quickly.


c The air conditioning system should be operated for approximately 10 minutes at least once a month. This helps pre- vent damage to the system due to lack of lubrication.


c A visible mist may be seen coming from the ventilators in hot, humid conditions as the air is cooled rapidly. This does not indicate a malfunction.


c If


the engine coolant


temperature gauge indicates engine coolant tem- perature over the normal range, turn the air conditioner off. See (cid:147)If your vehicle overheats(cid:148) in the (cid:147)In case of emergency(cid:148) section of this manual.


4-24 Display screen, heater, air conditioner, audio and phone systems


Z REVIEW COPY—2008 Titan (tzw) Owners Manual—USA_English (nna) 10/11/07—debbie X


Type B


WHA0916


WHA0917


Display screen, heater, air conditioner, audio and phone systems 4-25


Type B


Z REVIEW COPY—2008 Titan (tzw) Owners Manual—USA_English (nna) 10/11/07—debbie X


4-26 Display screen, heater, air conditioner, audio and phone systems


Type B


Type B


WHA0918


WHA0919


Z REVIEW COPY—2008 Titan (tzw) Owners Manual—USA_English (nna) 10/11/07—debbie X


Type B


Display screen, heater, air conditioner, audio and phone systems 4-27


WHA0920


Z REVIEW COPY—2008 Titan (tzw) Owners Manual—USA_English (nna) 10/11/07—debbie X


HEATER AND AIR CONDITIONER (manual)


WARNING


c The air conditioner cooling function op- erates only when the engine is running. c Do not leave children or adults who would normally require the assistance of others alone in your vehicle. Pets should also not be left alone. They could accidentally injure themselves or others through inadvertent operation of the vehicle. Also, on hot, sunny days, temperatures in a closed vehicle could quickly become high enough to cause severe or possibly fatal injuries to people or animals.


c Do not use the recirculation mode for long periods as it may cause the interior air to become stale and the windows to fog up.


Type C


WHA0535


1. 2. 3. 4. 5. 6.


Fan speed control dial Air recirculation button Temperature control dial Air conditioner button Air flow control dial Rear window defroster switch (if so equipped) CONTROLS Fan control dial The fan control dial turns the fan on and off, and controls fan speed.


Air flow control dial The air flow control dial allows you to select the air flow outlets. MAX A/C


(cid:151) Air flows from center and side


vents with maximum cooling (air conditioning).


(cid:151) Air flows from center and side


ventilators.


(cid:151) Air flows from center and side


ventilators and the front and rear floor outlets.


4-28 Display screen, heater, air conditioner, audio and phone systems


Z REVIEW COPY—2008 Titan (tzw) Owners Manual—USA_English (nna) 10/11/07—debbie X


(cid:151) Air flows mainly from the front


and rear floor outlets.


(cid:151) Air flows from defroster outlets


and the front and rear floor outlets.


(cid:151) Air flows mainly from defroster


outlets.


The air flow control dial also has intermediate positions which allow the air flow to be distrib- uted between 2 of the icon positions on the air flow control dial. Temperature control dial The temperature control dial allows you to adjust the temperature of the outlet air. To lower the temperature, turn the dial to the left. To increase the temperature, turn the dial to the right.


Air recirculation button


ON position: Push the the vehicle.


button to recirculate air inside


button to the on position when:


Push the c driving on a dusty road. c to prevent traffic fumes from entering pas-


senger compartment.


c for maximum cooling when using the air con-


ditioner.


OFF position: button again to turn air recircula- Push the tion off. Outside air is drawn into the passenger compartment and distributed through the se- lected outlet. Use the off position for normal heater or air con- ditioner operation.


Air conditioner button


Start the engine, turn the fan control dial to the desired position and push the button to turn on the air conditioner. A/C will appear on the display when the air conditioner is operating. To turn off the air conditioner, push the button again, the display will show A/C OFF. The air conditioner cooling function oper- ates only when the engine is running. Rear window defroster switch (if so equipped) For more information about the rear window de- froster switch, see (cid:147)Rear window defroster switch(cid:148) in the (cid:147)Instruments and controls(cid:148) section of this manual.


HEATER OPERATION Heating This mode is used to direct heated air to the foot outlets. Some air also flows from the defrost outlets.


1. Push the


button to the OFF position for normal heating. The indicator light on the will ap- pear on the display, if so equipped.)


button will go off. (


2. Turn the air flow control dial to the


position.


3. Turn the fan control dial to the desired posi-


tion.


4. Turn the temperature control dial to the de- sired position between the middle and the hot position.


Ventilation This mode directs outside air to the side and center ventilators.


1. Push the


button to the OFF position. button will will appear on the display, if so


The indicator light on the go off. ( equipped.)


Display screen, heater, air conditioner, audio and phone systems 4-29


2. Turn the air flow control dial to the


position.


Z REVIEW COPY—2008 Titan (tzw) Owners Manual—USA_English (nna) 10/11/07—debbie X


3. Turn the fan control dial to the desired posi-


tion.


4. Turn the temperature control dial to the de-


sired position.


Defrosting or defogging This mode directs the air to the defrost outlets to defrost/defog the windows. 1. Turn the air flow control dial to the


position.


2. Turn the fan control dial to the desired posi-


tion.


3. Turn the temperature control dial to the de- sired position between the middle and the hot position.


c To quickly remove ice or fog from the win- dows, turn the fan control dial to 4 and the temperature control lever to the full HOT position. c When the


position is selected, the air conditioner automatically turns on (however, the indicator light on the button will not come on and A/C will not appear on the display, if so equipped) if the outside tem- perature is more than 36(cid:176)F (2(cid:176)C). If in de- frost mode for more than one minute, the air conditioning system will continue to operate until the vehicle is shut off, or the A/C button


is used to turn off the compressor even if the air flow control dial is turned to a position position. This dehu- other than the midifies the air which helps defog the wind- shield. The mode automatically turns off, allowing outside air to be drawn into the passenger compartment to further improve the defogging performance.


1. Turn the air flow control dial to the


position.


2. Turn the fan control dial to the desired posi-


tion.


3. Turn the temperature control dial to the de- sired position between the middle and the hot position.


Bi-level heating The bi-level mode directs warmed air to the side and center vents and to the front and rear floor outlets.


1. Push the


button to the OFF position. button will will appear on the display, if so


The indicator light on the go off. ( equipped.)


2. Turn the air flow control dial to the


position.


3. Turn the fan control dial to the desired posi-


tion.


4. Turn the temperature control dial to the de-


sired position.


Heating and defogging This mode heats the interior and defogs the wind- shield.


c When the


position is selected, the air conditioner automatically turns on (however, the indicator light on the button will not come on and A/C will not appear on the display, if so equipped) if the outside tem- perature is more than 36(cid:176)F (2(cid:176)C). If in de- frost mode for more than one minute, the air conditioning system will continue to operate until the vehicle is shut off, or the A/C button is used to turn off the compressor even if the air flow control dial is turned to a position other than the position. This dehu- midifies the air which helps defog the wind- shield. The mode automatically turns off, allowing outside air to be drawn into the passenger compartment to further improve the defogging performance.


Operating tips Clear snow and ice from the wiper blades and air inlet in front of the windshield. This improves heater operation.


4-30 Display screen, heater, air conditioner, audio and phone systems


Z REVIEW COPY—2008 Titan (tzw) Owners Manual—USA_English (nna) 10/11/07—debbie X


AIR CONDITIONER OPERATION Start the engine, turn the fan control dial to the desired position, and push in the button to activate the air conditioner. When the air condi- tioner is on, cooling and dehumidifying functions are added to the heater operation. The air conditioner cooling function oper- ates only when the engine is running. Cooling This mode is used to cool and dehumidify the air.


1. Push the


button to the OFF position.


to the OFF position sure to return the for normal cooling. The indicator light on the will ap- pear on the display, if so equipped.) You may also select MAX A/C for quick cooling.


button will go off. (


Dehumidified heating This mode is used to heat and dehumidify the air.


1. Push the


button to the OFF position. button will will appear on the display, if so


The indicator light on the go off. ( equipped.)


2. Turn the air flow control dial to the


2. Turn the air flow control dial to the


position.


position.


3. Turn the fan control dial to the desired posi-


3. Turn the fan control dial to the desired posi-


tion.


tion.


4. Push the


button. The indicator light button will come on. (A/C will


on the appear on the display, if so equipped.)


5. Turn the temperature control dial to the de-


sired position.


c For quick cooling when the outside tem- perature is high, push the button to light on the ON position. The indicator the will button will come on. ( appear on the display, if so equipped.) Be


4. Push the


light on the will appear on the display, if so equipped.)


button on. The indicator button will come on. (A/C


5. Turn the temperature control dial to the de-


sired position. Operating tips c Keep the windows closed while the air con-


ditioner is in operation.


air from the passenger compartment. Then, close the windows. This allows the air con- ditioner to cool the interior more quickly.


c The air conditioning system should be operated for approximately 10 minutes at least once a month. This helps pre- vent damage to the system due to lack of lubrication.


c A visible mist may be seen coming from the ventilators in hot, humid conditions as the air is cooled rapidly. This does not indicate a malfunction.


c If


the engine coolant


temperature gauge indicates engine coolant tem- perature over the normal range, turn the air conditioner off. See (cid:147)If your vehicle overheats(cid:148) in the (cid:147)In case of emergency(cid:148) section of this manual.


AIR FLOW CHARTS The following charts show the button and dial positions for MAXIMUM AND QUICK heating, cooling or defrosting. For additional information on heating and cooling see (cid:147)Heater and air con- ditioner(cid:148) in this section. The air recirculation ) button should always be in the OFF position for heating and defrosting.


c After parking in the sun, drive for 2 or 3
minutes with the windows open to vent hot


Display screen, heater, air conditioner, audio and phone systems 4-31


Z REVIEW COPY—2008 Titan (tzw) Owners Manual—USA_English (nna) 10/11/07—debbie X


4-32 Display screen, heater, air conditioner, audio and phone systems


Type C


Type C


WHA1079


WHA1080


Z REVIEW COPY—2008 Titan (tzw) Owners Manual—USA_English (nna) 10/11/07—debbie X


Type C


WHA1081


WHA1082


Display screen, heater, air conditioner, audio and phone systems 4-33


Type C


Z REVIEW COPY—2008 Titan (tzw) Owners Manual—USA_English (nna) 10/11/07—debbie X


4-34 Display screen, heater, air conditioner, audio and phone systems


Type C


WHA1083


Z REVIEW COPY—2008 Titan (tzw) Owners Manual—USA_English (nna) 10/11/07—debbie X


HEATER AND AIR CONDITIONER (automatic) (if so equipped)


c Do not use the recirculation mode for long periods as it may cause the interior air to become stale and the windows to fog up.


Start the engine and operate the controls to activate the air conditioner. AUTOMATIC OPERATION Cooling or heating (auto) This mode may be normally used all year round as the system automatically works to keep a con- stant temperature. Air flow distribution and fan speed are also controlled automatically. 1. Push the AUTO button on. 2. Turn the temperature dial to the left or right to set the desired temperature. Driver and passenger temperatures can be set inde- pendently. Press DUAL to activate dual cli- mate control functions. Turn the passenger(cid:146)s side temperature control dial to the left or right to set the desired passenger(cid:146)s tem- perature.


c Adjust the temperature dial to about 75(cid:176)F


(24(cid:176)C) for normal operation.


Driver temperature control dial A/C ON/OFF button Front window defroster button Fan speed control dial System OFF button Rear window defroster button Air recirculation button Passenger temperature control dial DUAL button


1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Air flow control buttons 11. AUTO button


LHA0877


WARNING


c The air conditioner cooling function op- erates only when the engine is running. c Do not leave children or adults who would normally require the assistance of others alone in your vehicle. Pets should also not be left alone. They could accidentally injure themselves or others through inadvertent operation of the vehicle. Also, on hot, sunny days, temperatures in a closed vehicle could quickly become high enough to cause severe or possibly fatal injuries to people or animals.


Display screen, heater, air conditioner, audio and phone systems 4-35


Z REVIEW COPY—2008 Titan (tzw) Owners Manual—USA_English (nna) 10/11/07—debbie X


c The temperature of the passenger compart- ment will be maintained automatically. Air flow distribution, fan speed and A/C on/off are also controlled automatically.


c A visible mist may be seen coming from the ventilators in hot, humid conditions as the air is cooled rapidly. This does not indicate a malfunction.


Dehumidified defrosting or defogging 1. Push the defroster control button


to turn the system on. The indicator light in the button will illuminate.


2. Turn the temperature dial to the left or right


to set the desired temperature.


c To quickly remove ice from the outside of the windows, turn the manual fan control to the maximum position.


c As soon as possible after the windshield is clean, push the AUTO button to return to the auto mode. c When the


control is activated, the air conditioner will automatically be turned on at outside temperatures above 36(cid:176)F (2(cid:176)C). If in defrost mode for more than one minute, the air conditioning system will continue to op- erate until the fan control is turned OFF, the vehicle is shut off or the A/C button is used


to turn off the compressor even if an air flow is selected. This button other than dehumidifies the air which helps defog the windshield. The air recirculation mode auto- matically turns off, allowing outside air to be drawn into the passenger compartment to further improve the defogging performance.


MANUAL OPERATION Fan speed control dial Turn the fan speed control dial left or right to manually control the fan speed or turn the system on or off. Push the AUTO button to return to automatic control of the fan speed. Air recirculation Push the air recirculation button to recir- culate interior air inside the vehicle. Push the AUTO button to return to automatic mode. The air recirculation button will not be activated when the air conditioner is in DEF, floor, or floor/defrost mode.


Air flow control Push the air flow control buttons to manually control air flow and select the air outlet:


(cid:151) Air flows from center and side


ventilators.


(cid:151) Air flows from center and side


ventilators and foot outlets.


(cid:151) Air flows mainly from foot outlets. (cid:151) Air flows from defroster and foot


outlets.


(cid:151) Air flows from defroster outlets.


/OFF button.


To turn system off Press the OPERATING TIPS c When the engine coolant temperature and outside air temperature are low, the air flow from the foot outlets may not operate for a maximum of 150 seconds. However, this is not a malfunction. After the coolant tempera- ture warms up, air flow from the foot outlets will operate normally.


4-36 Display screen, heater, air conditioner, audio and phone systems


Z REVIEW COPY—2008 Titan (tzw) Owners Manual—USA_English (nna) 10/11/07—debbie X


LIC0836
The sunload sensor s1 , located on the top center of the instrument panel, helps the system main- tain a constant temperature. Do not put anything on or around this sensor.


SERVICING AIR CONDITIONER


AUDIO SYSTEM


The air conditioner system in your NISSAN ve- hicle is charged with a refrigerant designed with the environment in mind. This refrigerant does not harm the earth(cid:146)s ozone layer. Special charging equipment and lubricant is re- quired when servicing your NISSAN air condi- tioner. Using improper refrigerants or lubricants will cause severe damage to your air conditioner system. See (cid:147)Air conditioner system refrigerant and lubricant recommendations(cid:148) in the (cid:147)Techni- cal and consumer information(cid:148) section of this manual. A NISSAN dealer is able to service your (cid:147)environ- mentally friendly(cid:148) air conditioning system.


WARNING


The air conditioner system contains re- frigerant under high pressure. To avoid personal injury, any air conditioner ser- vice should be done only by an experi- enced technician with proper equipment.


RADIO Turn the ignition key to the ACC or ON position and press the PWR (power)/VOL (volume) knob to turn the radio on. If you listen to the radio with the engine not running, the key should be turned to the ACC position.


Radio reception is affected by station signal strength, distance from radio transmitter, build- ings, bridges, mountains and other external influ- ences. Intermittent changes in reception quality normally are caused by these external influences. Using a cellular phone in or near the ve- hicle may influence radio reception quality. Radio reception Your NISSAN radio system is equipped with state-of-the-art electronic circuits to enhance ra- dio reception. These circuits are designed to extend reception range, and to enhance the qual- ity of that reception.


However there are some general characteristics of both FM and AM radio signals that can affect radio reception quality in a moving vehicle, even when the finest equipment is used. These char- acteristics are completely normal in a given re- ception area, and do not indicate any malfunction in your NISSAN radio system.


Display screen, heater, air conditioner, audio and phone systems 4-37


Z REVIEW COPY—2008 Titan (tzw) Owners Manual—USA_English (nna) 10/11/07—debbie X


Reception conditions will constantly change be- cause of vehicle movement. Buildings, terrain, signal distance and interference from other ve- hicles can work against ideal reception. De- scribed below are some of the factors that can affect your radio reception. Some cellular phones or other devices may cause interference or a buzzing noise to come from the audio system speakers. Storing the de- vice in a different location may reduce or elimi- nate the noise. FM RADIO RECEPTION Range: FM range is normally limited to 25 (cid:150) 30 mi (40 (cid:150) 48 km), with monaural (single channel) FM having slightly more range than stereo FM. Exter- nal influences may sometimes interfere with FM station reception even if the FM station is within 25 mi (40 km). The strength of the FM signal is directly related to the distance between the transmitter and receiver. FM signals follow a line- of-sight path, exhibiting many of the same char- acteristics as light. For example, they will reflect off objects. Fade and drift: As your vehicle moves away from a station transmitter, the signals will tend to fade and/or drift.


Static and flutter: During signal interference from buildings, large hills or due to antenna position (usually in conjunction with increased distance from the station transmitter) static or flutter can be heard. This can be reduced by adjusting the treble control to reduce treble response. Multipath reception: Because of the reflective characteristics of FM signals, direct and reflected signals reach the receiver at the same time. The signals may cancel each other, resulting in mo- mentary flutter or loss of sound. AM RADIO RECEPTION AM signals, because of their low frequency, can bend around objects and skip along the ground. In addition, the signals can be bounced off the ionosphere and bent back to earth. Because of these characteristics, AM signals are also sub- ject to interference as they travel from transmitter to receiver. Fading: Occurs while the vehicle is passing through freeway underpasses or in areas with many tall buildings. It can also occur for several seconds during ionospheric turbulence even in areas where no obstacles exist. Static: Caused by thunderstorms, electrical power lines, electric signs and even traffic lights.


SATELLITE RADIO RECEPTION (if so equipped) When the satellite radio is first installed or the battery has been replaced, the satellite radio may not work properly. This is not a malfunction. Wait more than 10 minutes with satellite radio ON and the vehicle outside of any metal or large building for satellite radio to receive all of the necessary data. No satellite radio reception is available and (cid:147)NO SAT(cid:148) is displayed when the SAT band option is selected unless optional satellite receiver and antenna are installed and an XMT satellite radio service subscription is active. Satellite radio is not available in Alaska, Hawaii and Guam. Satellite radio performance may be affected if cargo carried on the roof blocks the satellite radio signal. If possible, do not put cargo over the satellite antenna. A build up of ice on the satellite radio antenna can affect satellite radio performance. Remove the ice to restore satellite radio reception


4-38 Display screen, heater, air conditioner, audio and phone systems


Z REVIEW COPY—2008 Titan (tzw) Owners Manual—USA_English (nna) 10/12/07—debbie X


Compact disc (CD) player


CAUTION


c Do not force a compact disc into the CD insert slot. This could damage the CD and/or CD changer/player.


c Trying to load a CD with the CD door closed could damage the CD and/or CD changer.


c Only one CD can be loaded into the CD


player at a time.


c Only use high quality 4.7 in (12 cm) round discs that have the (cid:147)COMPACT disc DIGITAL AUDIO(cid:148) logo on the disc or packaging.


c During cold weather or rainy days, the player may malfunction due to the hu- midity. If this occurs, remove the CD and dehumidify or ventilate the player completely.


c The player may skip while driving on


rough roads.


LHA0099
AUDIO OPERATION PRECAUTIONS


c The CD player sometimes cannot func- tion when the compartment tempera- ture low. Decrease/increase the temperature before use.


extremely high or


is


c Do not expose the CD to direct sun-


light.


c CDs that are in poor condition or are dirty, scratched or covered with finger- prints may not work properly.


c The following CDs may not work prop-


erly: c Copy control compact discs (CCCD) c Recordable compact discs (CD-R) c Rewritable compact discs (CD-RW) c Do not use the following CDs as they may cause the CD player to malfunc- tion: c 3.1 in (8 cm) discs with an adapter c CDs that are not round c CDs with a paper label c CDs that are warped, scratched, or


have abnormal edges


c This audio system can only play pre- recorded CDs. It has no capability to record or burn CDs.


c If the CD cannot be played, one of the following messages will be displayed.


Display screen, heater, air conditioner, audio and phone systems 4-39


Z REVIEW COPY—2008 Titan (tzw) Owners Manual—USA_English (nna) 10/12/07—debbie X


c ID3/WMA Tag (cid:151) The ID3/WMA tag is the part of the encoded MP3 or WMA file that contains information about the digital music file such as song title, artist, encoding bit rate, track time duration, etc. ID3 tag infor- mation is displayed on the Artist/song title line on the display.


* WindowsT and Windows MediaT are regis- tered trademarks and trademarks in the United States of America and other countries of Mi- crosoft Corporation of the USA.


CHECK DISC: c Confirm that the CD is inserted cor- rectly (the label side is facing up, etc.).


c Confirm that the CD is not bent or


warped and it is free of scratches.


PRESS EJECT:


This is an error due to excessive tem- perature inside the player. Remove the CD by pressing the EJECT button. After a short time, reinsert the CD. The CD can be played when the temperature of the player returns to normal. UNPLAYABLE: The file is unplayable in this audio sys- tem (only MP3 or WMA CD).


Compact Disc with MP3 or WMA Terms: c MP3 (cid:151) MP3 is short for Moving Pictures Experts Group Audio Layer 3. MP3 is the most well-known compressed digital audio file format. This format allows for near (cid:147)CD quality(cid:148) sound, but at a fraction of the size of normal audio files. MP3 conversion of an audio track from CD-ROM can reduce the file size by approximately a 10:1 ratio with


virtually no perceptible loss in quality. MP3
compression removes the redundant and irrelevant parts of a sound signal that the human ear doesn(cid:146)t hear.


c WMA (cid:151) Windows Media Audio (WMA)* is a compressed audio format created by Mi- crosoft as an alternative to MP3. The WMA codec offers greater file compression than the MP3 codec, enabling storage of more digital audio tracks in the same amount of space when compared to MP3s at the same level of quality.


c Bit rate (cid:151) Bit rate denotes the number of bits per second used by a digital music file. The size and quality of a compressed digital audio file is determined by the bit rate used when encoding the file.


c Sampling frequency (cid:151) Sampling frequency is the rate at which the samples of a signal are converted from analog to digital (A/D conversion) per second.


c Multisession (cid:151) Multisession is one of the methods for writing data to media. Writing data once to the media is called a single session, and writing more than once is called a multisession.


4-40 Display screen, heater, air conditioner, audio and phone systems


Z REVIEW COPY—2008 Titan (tzw) Owners Manual—USA_English (nna) 10/12/07—debbie X


Playback order: Music playback order of a CD with MP3 or WMA files is as illustrated. c The names of folders not containing MP3 or


WMA files are not shown in the display.


c If there is a file in the top level of the disc,


(cid:147)Root Folder(cid:148) is displayed.


c The playback order is the order in which the files were written by the writing software. Therefore, the files might not play in the desired order.


Playback order chart


WHA1078


Display screen, heater, air conditioner, audio and phone systems 4-41


Z REVIEW COPY—2008 Titan (tzw) Owners Manual—USA_English (nna) 10/12/07—debbie X


Specification chart:


Supported media Supported file systems


Supported versions*1


MP3


WMA


Version Sampling frequency Bit rate Version Sampling frequency Bit rate


Tag information Folder levels Text character number limitation


Displayable character codes*2


CD, CD-R, CD-RW ISO9660 LEVEL1, ISO9660 LEVEL2, Apple ISO, Romeo, Joliet * ISO9660 Level 3 (packet writing) is not supported. MPEG1, MPEG2, MPEG2.5
8 kHz - 48 kHz 8 kbps - 320 kbps, VBR WMA7, WMA8, WMA9
32 kHz - 48 kHz 48 kbps - 192 kbps, VBR ID3 tag VER1.0, VER1.1, VER2.2, VER2.3 (MP3 only) Folder levels: 8, Max folders: 255 (including root folder), Files: 512 (Max. 255 files for one folder) 128 characters 01: ASCII, 02: ISO-8859-1, 03: UNICODE (UTF-16 BOM Big Endian), 04: UNICODE (UTF-16 Non-BOM Big Endian), 05: UNICODE (UTF-8), 06: UNICODE (Non-UTF-16 BOM Little Endian)


*1 Files created with a combination of 48 kHz sampling frequency and 64 kbps bit rate cannot be played.


*2 Available codes depend on what kind of media, versions and information are going to be displayed.


4-42 Display screen, heater, air conditioner, audio and phone systems


Z REVIEW COPY—2008 Titan (tzw) Owners Manual—USA_English (nna) 10/12/07—debbie X


Troubleshooting guide:


Symptom


Cannot play


Poor sound quality


It takes a relatively long time before the music starts playing.


Music cuts off or skips


Skipping with high bit rate files Moves immediately to the next song when playing Songs do not play back in the desired order


Cause and Countermeasure


Check if the disc was inserted correctly. Check if the disc is scratched or dirty. Check if there is condensation inside the player. If there is, wait until the condensation is gone (about 1 hour) before using the player. If there is a temperature increase error, the CD player will play correctly after it returns to the normal temperature. Files with extensions other than (cid:147).MP3(cid:148), (cid:147).mp3(cid:148) or (cid:147).wma(cid:148) cannot be played. In addition, the character codes and number of characters for folder names and file names should be in compliance with the specifications. Check if the finalization process, such as session close and disc close, is done for the disc. Check if the disc is protected by copyright. Check if the disc is scratched or dirty. Bit rate may be too low. If there are many folders or file levels on the MP3/WMA disc, or if it is a multisession disc, some time may be required before the music starts playing.


The writing software and hardware combination might not match, or the writing speed, writing depth, writing width, etc., might not match the specifications. Try using the slowest writing speed. Skipping may occur with large quantities of data, such as for high bit rate data.


When a non-MP3/WMA file has been given an extension of (cid:147).MP3(cid:148), (cid:147).WMA(cid:148), .(cid:147)mp3(cid:148)or (cid:147).wma(cid:148), or when play is prohibited by copyright protection, there will be approximately 5 seconds of no sound and then the player will skip to the next song. The playback order is the order in which the files were written by the writing software. Therefore, the files might not play in the desired order.


Display screen, heater, air conditioner, audio and phone systems 4-43


Z REVIEW COPY—2008 Titan (tzw) Owners Manual—USA_English (nna) 10/12/07—debbie X


FM/AM RADIO WITH COMPACT DISC (CD) PLAYER (if so equipped) For all operation precautions, see 9Audio opera- tion precautions9 earlier in this section. Power button and VOL control knob


Turn the ignition key to the ACC or ON position, then press the PWR (power) button. If you listen to the radio with the engine not running, turn the key to the ACC position. The mode (radio or CD) that was playing immediately before the system was turned off resumes playing. When no CD is loaded, the radio comes on. Pressing the PWR button again turns the system off. Turn the VOL control knob to the right to increase volume or to the left to decrease volume. MENU button (BASS, TREBLE, FADE, BAL- ANCE and CLOCK): Press the MENU button to change the mode as

Loading...
x