2002 Nissan Frontier Owners Manual

etc.).

c Do not include the spare tire in the

tire rotation.

c For additional information regarding tires, refer to ‘‘Important Tire Safety Information’’ in the Warranty Infor- mation Booklet (US) or ‘‘Tire Safety Information’’ in the Warranty and Roadside Assistance Information booklet (Canada).

ADI1115

CHANGING WHEELS AND TIRES Tire rotation NISSAN recommends rotating the tires ev- ery 7,500 miles (12,000 km). See ‘‘Flat tire’’ in the ‘‘In case of emergency’’ section for tire replacing procedures.

Wheel nut tightening torque:

98 ft-lb (133 Nzm)

8-40 Maintenance and do-it-yourself

Z X

c Improper service of the spare tire may result in serious personal in- jury. If it is necessary to repair the spare tire, contact an authorized NISSAN dealer.

c For additional information regarding tires, refer to ‘‘Important Tire Safety Information’’ in the Warranty Infor- mation Booklet (US) or ‘‘Tire Safety Information’’ in the Warranty and Roadside Assistance Information booklet (Canada).

Replacing tires and wheels When replacing a tire, use the same size, tread design, speed rating and load carrying capacity as originally equipped. Recom- mended types and sizes are shown in ‘‘Wheel/tire size’’ in the ‘‘Technical and con- sumer information’’ section of this manual.

WARNING

c The use of tires other than those recommended or the mixed use of tires of different brands, construction (bias, bias-belted or radial), or tread patterns can adversely affect the ride,

MDI0004

Tire wear and damage

WARNING

c Tires should be periodically in- spected for wear, cracking, bulging or objects caught in the tread. If excessive wear, cracks, bulging or deep cuts are found, the tire(s) should be replaced.

c The original

tires have a built-in tread wear indicator. When the wear indicators are visible, the tire(s) should be replaced.

braking, handling, ground clearance, body-to-tire clearance, tire chain clearance, speedometer calibration, headlight aim and bumper height. Some of these effects may lead to accidents and could result in serious personal injury.

c If the wheels are changed for any reason, always replace with wheels which have the same offset dimen- sion. Wheels of a different offset could cause premature tire wear, de- grade vehicle handling characteris- tics and/or interference with the brake discs/drums. Such interfer- ence can lead to decreased braking efficiency brake pad/shoe wear. Refer to (Wheel/tire size( in the (Technical and consumer information( section of this manual for wheel off-set dimensions.

and/or

early

c Do not install a deformed wheel or tire even if it has been repaired. Such wheels or tires could have unknown structural damage and could fail without warning.

Maintenance and do-it-yourself 8-41

Z X

c The use of retread tires is not recom-

mended.

c For additional information regarding tires, refer to ‘‘Important Tire Safety Information’’ in the Warranty Infor- mation Booklet (US) or ‘‘Tire Safety Information’’ in the Warranty and Roadside Assistance Information booklet (Canada).

Four-wheel drive models

CAUTION

Always use tires of the same size, brand, construction (bias, bias-belted or radial), and tread pattern on all four wheels. Failure to do so may result in a circumference difference between tires on the front and rear axles which will cause excessive tire wear and may damage the transmission, transfer case and differential gears.

If excessive tire wear is found, it is recom- mended that all four tires be replaced with tires of the same size, brand, construction and tread pattern. The tire pressure and 8-42 Maintenance and do-it-yourself

wheel alignment should also be checked and corrected as necessary. Contact an authorized NISSAN dealer. Wheel balance Unbalanced wheels may affect vehicle han- dling and tire life. Even with regular use, wheels can get out of balance. Therefore, they should be balanced as required. Wheel balance service should be performed with the wheels off the vehicle. Spin balanc- ing the front wheels on the vehicle could lead to transmission damage. c For additional information regarding tires, refer to ‘‘Important Tire Safety Informa- tion’’ in the Warranty Information Booklet (US) or ‘‘Tire Safety Information’’ in the Warranty and Roadside Assistance Infor- mation booklet (Canada).

Care of wheels c Wash the wheels when washing the ve-

hicle to maintain their appearance.

c Clean the inner side of the wheels when the wheel is changed or the underside of the vehicle is washed.

c Do not use abrasive cleaners when

washing the wheels.

c Inspect wheel rims regularly for dents or corrosion. This may cause loss of pres- sure or damage the tire bead.

c NISSAN recommends waxing the road in

wheels to protect against road salt areas where it is used during winter.

Spare tire (TEMPORARY USE ONLY) Your vehicle may be equipped with a TEM- PORARY USE ONLY spare tire. To avoid property damage or personal injury when using the TEMPORARY USE ONLY spare tire, observe the following cautions:

WARNING

c The spare tire should be used for It should be emergency use only. replaced with the standard tire at the first opportunity to avoid possible tire or differential damage.

c Drive carefully while the TEMPO- RARY USE ONLY spare tire is in- stalled. Avoid sharp turns and abrupt braking while driving.

Z X

c Periodically check spare tire infla- tion pressure. Always keep the pres- sure of the TEMPORARY USE ONLY spare tire at 60 psi (420 kPa, 4.2 bar). Always keep the pressure of the full size spare tire (if so equipped) at the recommended pressure for standard tires, as indicated on the tire placard. For tire placard location, see (Tire placard( in the index of this manual . c With the TEMPORARY USE ONLY spare tire installed do not drive the vehicle at speeds faster than 50 MPH (80 km/h).

c When driving on roads covered with snow or ice, the TEMPORARY USE ONLY spare tire should be used on the front wheels and the original tire used on the rear wheels (drive wheels). Use tire chains only on the two rear original tires.

c Tire tread of the TEMPORARY USE ONLY spare tire will wear at a faster rate than the standard tire. Replace the spare tire as soon as the tread wear indicators appear.

c Do not use the spare tire on other

vehicles.

c Do not use more than one spare tire

at the same time.

c Do not tow a trailer when the TEM- PORARY USE ONLY spare tire is installed.

CAUTION

With the spare tire installed the transfer control lever must be in the 2H position to prevent the transfer case and differential gears from be- ing damaged.

c Do not use tire chains on a TEMPO- RARY USE ONLY spare tire. Tire chains will not fit properly and may cause damage to the vehicle.

c Because the TEMPORARY USE ONLY spare tire is smaller than the original tire, ground clearance is reduced. To avoid damage to the vehicle, do not drive over obstacles. Also, do not drive the vehicle through an automatic car wash since it might get caught.

Maintenance and do-it-yourself 8-43

Z X

MEMO

8-44 Maintenance and do-it-yourself

Z X

9 Technical and consumer information

Capacities and recommended fuel/lubricants........9-2
Fuel recommendation........................................9-4
Engine oil and oil filter recommendation...........9-6
Recommended SAE viscosity number..............9-7
Air conditioner system refrigerant and lubricant recommendations ...............................9-8
Specifications .........................................................9-9
Engine ...............................................................9-9
Wheels and tires..............................................9-10
Dimensions and weights .................................9-11

When traveling or registering your vehicle in another country ....................................................9-12
Vehicle identification ............................................9-12

Vehicle identification number (VIN) plate.................................................................9-12
Vehicle identification number (chassis number).............................................9-12
Engine serial number ......................................9-13
F.M.V.S.S. certification label ...........................9-13
Emission control information label ..................9-14
Tire placard......................................................9-14
Air conditioner specification label....................9-14

Installing front license plate..................................9-15
Vehicle loading information..................................9-15
Terms...............................................................9-15
Determining vehicle payload capacity.............9-16
Securing the load ............................................9-16
Loading tips .....................................................9-17
Truck-camper loading information........................9-17
Payload weight capacity..................................9-19
Measurement of weights .................................9-21
Towing a trailer.....................................................9-21
Maximum load limits........................................9-21
Towing load/specification chart .......................9-23
Towing safety ..................................................9-24
Uniform tire quality grading..................................9-26
Emission control system warranty .......................9-27
Reporting safety defects (US only)......................9-28
Readiness for inspection/maintenance (I/M) test (US only) .......................................................9-28
Owner’s manual/service manual order information............................................................9-30
In the event of a collision ................................9-31

Z X

CAPACITIES AND RECOMMENDED FUEL/ LUBRICANTS The following are approximate capacities. The actual refill capacities may be a little different. When refilling, follow the procedure described in the ‘‘Do-it-yourself’’ section to determine the proper refill capacity.

Fuel

KA24DE (4 cylinder) VG33E (6 cylinder) VG33ER (6 cylinder with supercharger)

Engine oil

Drain and Refill

KA24DE

VG33E/VG33ER

With oil filter Without oil filter

With oil filter Without oil filter

Cooling system (with heater and reservoir tank)

KA24DE

M/T

A/T

VG33E/VG33ER A/T & M/T

Capacity (Approximate)

US

measure

Imp

measure

15-7/8 gal 19-3/8 gal

19-3/8 gal

13-1/4 gal 16-1/8 gal

16-1/8 gal

3-3/4 qt 3-1/2 qt

3-1/2 qt 3-1/8 qt

7-3/4 qt

7-1/2 qt

11-5/8 qt

3-1/8 qt 2-7/8 qt

2-7/8 qt 2-5/8 qt

6-3/8 qt

6-1/4 qt

9-5/8 qt

Liter

60.2
73.4

73.4

3.5
3.3

3.3
3.0

7.3

7.1

Recommended Fluids & Lubricants

Unleaded gasoline with an octane rating of at least 87
AKI (RON 91)*1

Unleaded gasoline with an octane rating of at least 91
AKI (RON 96)*1

c API Certification Mark *2
c API grade SG/SH, Energy Conserving I & II

or API grade SJ, Energy Conserving *2

c ILSAC grade GF-I & GF-II*2

50% Genuine NISSAN Anti-freeze coolant or equiva- lent

10.95

50% Demineralized or distilled water

*1: For further details, see ‘‘Fuel recommendation’’.

*2: For further details, see ‘‘Recommended SAE engine oil viscosity’’.

9-2 Technical and consumer information

Z X

KA24DE VG33E/ VG33ER

KA24DE VG33E/ VG33ER

4x2

4x2

4x4

4x4 Front

Rear

Manual transmission gear oil

Final drive gear oil

Transfer fluid

Automatic transmission fluid

Power steering fluid

Brake and clutch fluid

Capacity (Approximate)

US

measure 4-1/4 pt

5-7/8 pt

10-3/4 pt 2-3/4 pt

3-1/8 pt

5-7/8 pt

2-3/8 qt

Imp

measure 3-1/2 pt

4-7/8 pt

9 pt

2-1/4 pt

2-5/8 pt

4-7/8 pt

2 qt

Liter

2.0

2.8

5.1
1.3

1.5

2.8

2.2

Refill to the proper oil level according to the instructions in the ‘‘Do-it- yourself’’ section.

Recommended Fluids & Lubricants

API GL-4*1 Viscosity SAE 75W-90 only

API GL-5*1

Nissan Matic ‘D’ (Continental U.S. and Alaska) or Canada NISSAN Automatic Transmission Fluid or API GL-4. *4
Nissan Matic ‘D’ (Continental U.S. and Alaska) or Canada NISSAN Automatic Transmission Fluid. *4
Genuine NISSAN PSF II or equivalent *7
Genuine Nissan Brake Fluid*5 or equivalent DOT 3 (US FMVSS No. 116) NLGI No. 2 (Lithium Complex) HFC-134a (R-134a)*6
Nissan A/C System Lubricant PAG Type R or equivalent*6

Multi-purpose grease Air conditioning system refrigerant Air conditioning system lubricant *1: For further details, see ‘‘Recommended SAE gear oil viscosity’’. *2: SAE 90 is acceptable in temperatures above 0°F (−18°C). *3: Contact your NISSAN dealer for a list of approved oils. *4: DexronTM III/MerconTM or equivalent may also be used. Outside the Continental United States and Alaska contact an authorized Nissan dealership for more information regarding suitable

1.32 - 1.54 (0.60 - 0.70)

200 ml

lb (kg)

6.8 oz

7.0 oz

—

—

—

fluids, including recommended brand(s) of DexronTM III/MerconTM Automatic Transmission Fluid.

*5: Available in mainland U.S.A. through an authorized NISSAN dealer. *6: For further details, see ‘‘Air conditioner specification label’’. *7: Genuine NISSAN PSF, Canada NISSAN Automatic Transmmission Fluid, DexronTMIII/MerconTM, or equivalent ATF may also be used.

Technical and consumer information 9-3

Z X

FUEL RECOMMENDATION (except Supercharger) Your vehicle is designed to operate on unleaded gasoline with an octane rating of at least 87 AKI (Anti-Knock Index) (Research octane number 91). (Supercharger) Use unleaded premium gasoline with an octane rating of at least 91 AKI (Anti-Knock Index) number (Research octane number 96). If unleaded premium gasoline is not available, unleaded regular gasoline with an octane rating of at least 87 AKI (Re- search octane number 91) can be used, but only under the following precau- tions: c Have the fuel tank filled only partially with unleaded regular gasoline, and fill up with unleaded premium as soon as pos- sible.

c Avoid full throttle driving and abrupt ac-

celeration.

9-4 Technical and consumer information

CAUTION

c Using a fuel other than that specified could adversely affect the emission control system, and may also affect the warranty coverage.

c Under no circumstances should a leaded gasoline be used, since this will damage the three-way catalyst.

Reformulated Gasoline Some fuel suppliers are now producing re- formulated gasolines. These gasolines are specially designed to reduce vehicle emis- sions. NISSAN supports efforts towards cleaner air and suggests that you use refor- mulated gasoline when available. Gasoline containing oxygenates Some fuel suppliers sell gasoline containing oxygenates such as ethanol, MTBE and methanol with or without advertising their presence. Nissan does not recommend the use of fuels of which the oxygenate content and the fuel compatibility for your NISSAN cannot be readily determined. If in doubt, ask your service station manager.

If you use oxygenate-blend gasoline, please take the following precautions as the usage of such fuels may cause vehicle perfor- mance problems and/or fuel system dam- age. c The fuel should be unleaded and have an octane rating no lower than that recommended for unleaded gasoline.

c If an oxygenate-blend, excepting a methanol blend, it should contain no more than 10% oxygenate. (MTBE may, however, be added up to 15%.)

is used,

c If a methanol blend is used, it should contain no more than 5% methanol It (methyl alcohol, wood alcohol). should also contain a suitable amount of appropriate cosolvents and corrosion inhibitors. If not prop- erly formulated with appropriate co- solvents and corrosion inhibitors, such methanol blends may cause fuel system damage and/or vehicle perfor- mance problems. At this time, suffi- cient data is not available to ensure that all methanol blends are suitable for use in NISSAN vehicles.

Z X

If any driveability problems such as engine stalling and hard hot starting are experi- enced after using oxygenate-blend fuels, immediately change to a non-oxygenate fuel or a fuel with a low blend of MTBE. Take care not to spill gasoline during refueling. Gasoline containing oxygen- ates can cause paint damage. After Market Fuel Additives NISSAN does not recommend the use of any fuel additives (i.e., fuel injector cleaner, octane booster, intake valve deposit remov- ers, etc.) which are sold commercially. Many of these additives intended for gum, varnish or deposit removal may contain active solvents or similar ingredients that can be harmful to the fuel system and engine. Octane rating tips In most parts of North America, you should use unleaded gasoline with an octane rating of at least 87 (except supercharger) or 91
(supercharger) AKI (Anti-Knock Index). However, for non-supercharged vehicles only, you may use unleaded gasoline with an octane rating as low as 85 AKI in high altitude areas (over 4,000 ft [1,219 m]) such

as: Colorado, Montana, New Mexico, Utah, Wyoming, northeastern Nevada, southern Idaho, western South Dakota, western Ne- braska, and the part of Texas which is directly south of New Mexico. Using unleaded gasoline with an octane rating lower than stated above can cause persistent, heavy ‘‘spark knock.’’ (‘‘Spark knock’’ is a metallic rapping noise.) If severe, this can lead to engine damage. If you detect a persistent heavy spark knock even when using gasoline of the stated octane rating, or if you hear steady spark knock while holding a steady speed on level roads, have an authorized NISSAN dealer correct the condition. Fail- ure to correct the condition is misuse of the vehicle, for which NISSAN is not re- sponsible. Incorrect ignition timing may result in spark knock, after-run and/or overheating, which may cause excessive fuel consumption or engine damage. If any of the above symp- toms are encountered, have your vehicle checked at an authorized NISSAN dealer. However, now and then you may notice light spark knock for a short time while accelerating or driving up hills. This is

no cause for concern, because you get the greatest fuel benefit when there is light spark knock for a short time under heavy engine load.

Technical and consumer information 9-5

Z X

ENGINE OIL AND OIL FILTER RECOMMENDATION Selecting the correct oil

It is essential to choose engine oil with the correct quality and viscosity to ensure sat- isfactory engine life and performance. NISSAN recommends the use of a low friction oil (energy conserving oil) in order to improve fuel economy and conserve en- ergy. Oils which do not have the specified quality label should not be used as they could cause engine damage.

9-6 Technical and consumer information

WTI0033

Only those engine oils with the American Petroleum Institute (API) CERTIFICATION MARK on the front of the container should be used. This type of oil supersedes the existing API SG, SH or SJ and Energy Conserving I & II categories. If you cannot find engine oil with the API CERTIFICATION MARK, use an API grade SG/SH, Energy Conserving I & II or API grade SJ, Energy Conserving oil. An oil with a single designation SG or SH, or in combi- nation with other categories (for example, SG/CC or SG/CD) may also be used if one with the API CERTIFICATION MARK cannot

be found. An ISLAC grade GF-I & GF-II oil can also be used. Mineral based or synthetic type oils may be used in your NISSAN vehicle. These oils must however, meet the API quality and SAE viscosity ratings specified for your ve- hicle. Do not mix mineral based and syn- thetic type oils in the engine. Oil additives NISSAN does not recommend the use of oil additives. The use of an oil additive is not necessary when the proper oil type is used and maintenance intervals are followed. Oil which may contain foreign matter or has been previously used should not be used. Oil viscosity thickness The engine oil viscosity or changes with temperature. Because of this, it is important that the engine oil viscosity be selected based on the temperatures at which the vehicle will be operated before the next oil change. The chart ‘‘Recom- mended SAE viscosity number’’ shows the recommended oil viscosities for the ex- pected ambient temperatures. Choosing an oil viscosity other than that recommended

Z X

could cause serious engine damage. Selecting the correct oil filter Your new NISSAN vehicle is equipped with a high-quality genuine NISSAN oil filter. When replacing, use a genuine NISSAN oil filter or its equivalent for the reason de- scribed in ‘‘Change intervals’’. Change intervals The oil and oil filter change intervals for your engine are based on the use of the specified quality oils and filters. Oil and filter other than the specified quality, or oil and filter change intervals longer than recommended could reduce engine life. Damage to the engine caused by improper maintenance or use of incorrect oil filter quality and/or vis- cosity is not covered by the new NISSAN vehicle warranties. Your engine was filled with a high quality engine oil when it was built. You do not have to change the oil before the first recom- mended change interval. Oil and filter change intervals depend upon how you use your vehicle. Operation under the following conditions may require more frequent oil and filter changes:

— repeated short distance driving at cold

outside temperatures,

RECOMMENDED SAE VISCOSITY NUMBER

— driving in dusty conditions, — extensive idling, — towing a trailer.

ATI1028

c SAE 5W-30 viscosity oil is preferred for all temperatures. SAE 10W-30, SAE 10W-40 viscosity oils may be used if the ambient temperature is above 0°F (-18°C).

Technical and consumer information 9-7

Z X

Contact an authorized NISSAN dealer when servicing your air conditioner system.

AIR CONDITIONER SYSTEM REFRIGERANT AND LUBRICANT RECOMMENDATIONS The air conditioner system in this NIS- SAN vehicle must be charged with the refrigerant HFC-134a (R-134a) and the lubricant, NISSAN A/C system lubricant PAG Type R or the exact equivalents.

CAUTION

The use of any other refrigerant or lubricant will cause severe damage to the air conditioning system and will require the replacement of all air con- ditioner system components.

The refrigerant HFC-134a (R-134a) in your NISSAN vehicle does not harm the earth’s ozone layer. Although this refrigerant does not affect the earth’s atmosphere, certain government regulations require the recov- ery and recycling of any refrigerant during automotive air conditioner system service. An authorized NISSAN dealer has the trained technicians and equipment needed to recover and recycle your air conditioner system refrigerant.

ATI0510

c 80W-90 for the differential and 75W-90
for the transfer case are preferable for ambient temperatures below 104°F (40°C).

9-8 Technical and consumer information

Z X

SPECIFICATIONS

ENGINE Model Type Cylinder arrangement Bore × Stroke Displacement Firing order Idle speed Ignition timing degree (BTDC) at idle speed CO percentage at idle speed

in (mm) cu in (cm3)

rpm

degree/rpm [No air] %

KA24DE Gasoline, 4-cycle 4-cylinder in-line 3.504 × 3.780 (89.0 × 96.0) 145.78 (2,389) 1-3-4-2

VG33E/VG33ER Gasoline, 4-cycle 6-cylinder, V-slanted at 60° 3.602 x 3.268 (91.5 x 83.0) 199.84 (3,275) 1-2-3-4-5-6

See the ‘‘Emission Control Label’’ on the underside of the hood.

Spark plug

Spark plug gap Camshaft operation Generator belt size

PFR5G-11 (Standard) *1
PFR6G-11 (Cold) *1

Nominal: in (mm)

0.043 (1.1) Timing chain

(except Supercharger) PFR5G-11 (Standard) *1
PFR6G-11 (Cold) *1
PFR4G-11 (Hot) *1
0.043 (1.1) Timing belt *2

(Supercharger) PFR6G-11 (Standard) *1
PFR7G-11 (Cold) *1
PFR5G-11 (Hot) *1

Width × Length

in (mm)

0.413 x 35.63 (10.5 x 905)

0.701 x 31.69 (17.8 x 805)

*1: Always check with the Parts Department at an authorized NISSAN dealer for the latest parts information. *2: Periodic maintenance is necessary. See 9Periodic maintenance schedules9 in the 9NISSAN Service and Maintenance Guide.9

The spark ignition system of this vehicle meets all requirements of the Canadian Interference — Causing Equipment Regulations.

Technical and consumer information 9-9

Z X

WHEELS AND TIRES

4X2

King Cab:

Crew Cab

4X4

King Cab:

Crew Cab:

XE

SE

SC

XE

SE

SC

XE

SE

SC

XE

SE

SC

Road wheel/offset in (mm)

15X6JJ/1.18 (30) Steel 15X7JJ/0.79 (20) Alloy 15X7JJ/1.18 (30) Steel* 15X7JJ/1.57 (40) Alloy*

16X7JJ/1.57 (40) Alloy

17X7JJ/1.57 (40) Alloy

15X7JJ/1.18 (30) Alloy 15X7JJ/1.57 (40) Alloy

16X7JJ/1.57 (40) Alloy

17X7JJ/1.57 (40) Alloy

15X7JJ/1.18 (30) Steel 15X7JJ/1.57 (40) Alloy

16X7JJ/1.57 (40) Alloy

17X7JJ/1.57 (40) Alloy

15X7JJ/1.18 (30) Alloy 15X7JJ/1.57 (40) Alloy

16X7JJ/1.57 (40) Alloy

17X7JJ/1.57 (40) Alloy

* Not available with KA24DE engine.

9-10 Technical and consumer information

Spare tire size

T135/90D16
T135/90D16
P265/70R15* P265/70R15*

P255/65R16

P265/55R17

P265/70R15
P265/70R15

P255/65R16

P265/55R17

P265/70R15
P265/70R15

P265/70R16

P265/55R17

P265/70R15
P265/70R15

P265/70R16

P265/55R17

Tire

P225/70R15
P225/70R15
P265/70R15* P265/70R15*

P255/65R16

P265/55R17

P265/70R15
P265/70R15

P255/65R16

P265/55R17

P265/70R15
P265/70R15

P265/70R16

P265/65R17

P265/70R15
P265/70R15

P265/70R16

P265/65R17

Z X

DIMENSIONS AND WEIGHTS

Drive Type Body Wheelbase Overall length*1
Overall width

Overall height

Front tread

Rear tread

Wheelbase Gross vehicle weight rating lb (kg)

King Cab

Long

5153 (202.9) 1808 (71.2)*4
1605 (63.2)*2
1694 (66.7)*3
1687 (66.4)*5
1395 (54.9)*2
1525 (60) 1390 (54.7)*2
1507 (59.3) 2950 (116.1)

2WD

Crew Cab

Short

5077 (199.9) 1808 (71.2)*4

1694 (66.7)*3
1687 (66.4)*5

Crew Cab

Long

5532 (217.8) 1808 (71.2)**4

1694 (66.7)*3
1687 (66.4)*5

King Cab

Long

5153 (202.9) 1808 (71.2)*4

1694 (66.7)*3
1687 (66.4)*5

4WD

Crew Cab

Short

5077 (199.9) 1808 (71.2)*4

Unit: (mm) (in)

Crew Cab

Long

5532 (217.8) 1808 (71.2)*4

1687 (66.4)

1687 (66.4)

1525 (60)

1525 (60)

1525 (60)

1525 (60)

1525 (60)

1507 (59.3)

1507 (59.3)

1507 (59.3)

1507 (59.3)

1507 (59.3)

2950 (116.1)

3329.9 (131.1)

2950 (116.1)

2950 (116.1)

3329.9 (131.1)

Gross axle weight rating

See the ‘‘F.M.V.S.S. certification label’’ on the driver side door jamb pillar.

Front Rear

lb (kg) lb (kg)

*1: Includes rear step bumper. *2: XE with KA24DE engine. *3: XE with VG33E engine and SE models. *4: With over-fender. *5: SC with VG33ER engine.

Technical and consumer information 9-11

Z X

WHEN TRAVELING OR REGIS- TERING YOUR VEHICLE IN ANOTHER COUNTRY When planning to drive your NISSAN vehicle in another country, you should first find out if the fuel available is suitable for your vehicle’s engine. Using fuel with too low an octane rating may cause engine damage. All gasoline vehicles can be operated with unleaded gasoline. Therefore, avoid driving your vehicle in ar- eas where appropriate fuel is not available. When transferring the registration of your vehicle to another country, state, province or district, it may be necessary to modify the vehicle to meet local laws and regulations. The laws and regulations for motor vehicle emission control and safety standards vary according to the country, state, province or district; therefore, vehicle specifications may differ. When any vehicle is to be taken into another country, state, province or dis- trict and registered, its modifications, transportation and registration are the responsibility of the user. NISSAN is not responsible for any inconvenience that may result.

VEHICLE IDENTIFICATION

CA0018

ATI1009

VEHICLE IDENTIFICATION NUMBER (VIN) PLATE The vehicle identification number plate is attached to the top of the instrument panel on the driver’s side. This number is the identification for your vehicle and is used in the vehicle registration.

VEHICLE IDENTIFICATION NUMBER (Chassis number)

9-12 Technical and consumer information

Z X

ATI1016

WTI0029

WTI0013

ENGINE SERIAL NUMBER The number is stamped on the engine as shown.

F.M.V.S.S. CERTIFICATION LABEL The Federal Motor Vehicle Safety Standard (FMVSS) certification label is attached as shown. This label contains valuable vehicle information, such as: Gross Vehicle Weight Rating (GVWR), Gross Axle Weight Rating (GAWR), month and year of manufacture, Vehicle Identification Number (VIN), etc. Review it carefully.

Technical and consumer information 9-13

Z X

WTI0014

LTI0023

WTI0015

EMISSION CONTROL INFORMATION LABEL The emission control is attached to the underside of the hood as shown.

information label

TIRE PLACARD The cold tire pressure is shown on the tire placard affixed to the inside of the glove box lid.

AIR CONDITIONER SPECIFICATION LABEL The label is attached to the underside of the hood as shown.

9-14 Technical and consumer information

Z X

INSTALLING FRONT LICENSE PLATE

Use the following steps to mount the front license plate: 1. Remove the two screw gromments from

the glove box.

2. Carefully drill a hole using a 0.39 inch (10
mm) drill bill at each location mark (small dimple) on the bumper fascia.

3. Insert one grommet into each hole. 4. Insert a small screwdriver into the grom-

met to turn the plastic insert.

5. Install the license plate with two M5 x 25

mm bolts.

VEHICLE LOADING INFORMATION

WARNING

c It is extremely dangerous to ride in a cargo area inside of a vehicle. In a collision, people riding in these ar- eas are more likely to be seriously injured or killed.

c Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. c Be sure everyone in the vehicle is in a seat with their seat belt properly fas- tened.

TERMS It is important to familiarize yourself with the following terms before loading your vehicle. c Curb Weight (actual weight of your including: vehicle) − vehicle weight standard and optional equipment, fluids, emergency tire assembly. This weight does not include passengers and cargo.

spare

tools,

and

WTI1016

c GVW (Gross Vehicle Weight) − curb weight plus the combined weight of pas- sengers and cargo.

Technical and consumer information 9-15

Z X

3) After loading (cargo and passengers), reweigh your vehicle to determine if ei- ther GVWR or GAWR for your vehicle is exceeded. If GVWR is exceeded, re- move cargo as necessary. If either the front or rear GAWR is exceeded, shift the load or remove cargo as necessary.

c GVWR (Gross Vehicle Weight Rating) − maximum total weight (load) limit speci- fied for the vehicle.

c GAWR (Gross Axle Weight Rating) − maximum weight (load) limit specified for the front or rear axle.

DETERMINING VEHICLE PAY- LOAD CAPACITY The payload capacity of this vehicle is de- termined by weight, not by available cargo space. For example, a roof rack, bike car- rier, or similar equipment does not increase payload carrying capacity of your vehicle. To determine vehicle payload capacity: Vehicle weight can be determined by using a commercial-grade scale, found at places such as a truck stop, gravel quarry, grain elevator, or a scrap metal recycling facility. 1) Determine the curb weight of your ve-

hicle.

2) Compare the curb weight amount to the GVWR specified for your vehicle to de- termine how much more weight your vehicle can carry.

9-16 Technical and consumer information

ATI1020

SECURING THE LOAD For your convenience, tie down hooks are placed at each corner of the truck box. These may be used to help secure cargo loaded into the truck box.

WARNING

c Properly secure all cargo with ropes or straps to help prevent it from sliding or shifting. Do not place cargo higher than the seat backs. In a sudden stop or collision, unse- cured cargo could cause personal injury.

Z X

c Do not load your vehicle any heavier than the GVWR or the maximum front and rear GAWR’s. If you do, parts on your vehicle can break, tire damage could occur, or it can change your vehicle handles. This could result in loss of control and cause personal injury.

the way

CAUTION

Overloading can shorten the life of your vehicle. Failures caused by overloading are not covered by your warranty.

LOADING TIPS c The GVW must not exceed GVWR or GAWR as specified on the FMVSS Cer- tification Label located on the driver’s door jamb pillar.

c Do not load the front and rear axle to the GAWR. Doing so will exceed the GVWR.

c Loads should be spread out, and cargo should be properly secured. Large or heavy objects should be placed toward

the front of the truck box to help prevent sliding or shifting.

TRUCK-CAMPER LOADING INFORMATION

It

Crew Cab models: Crew Cab models should not be used to carry a slide-in camper. Regular and King Cab models: This information is provided for you to prop- erly install a slide-in camper and is based on the National Highway Traffic Safety Admin- istration regulations. is recommended that, before installing the camper, you care- fully read the following information and en- sure that the camper meets the specifica- tions. This information may not apply to some Canada model vehicles. Special body vehicles Some vehicles are equipped with commer- cial or camper bodies. However, this Own- er’s Manual does not cover these options. For further information, please refer to the body manufacturer’s instruction manual.

Technical and consumer information 9-17

Z X

WARNING

Improper loading may be dangerous. If a load is too far back, it can affect handling characteristics. If a load is too far forward, the front axle may be over- loaded.

ATI0703

Location for center of gravity The illustration indicates the recommended cargo center of gravity location zone. King cab: L1 = 960.1 mm (37.8 in), L2 = 1,087.1 mm (42.8 in)

9-18 Technical and consumer information

ATI0705

When the truck is used to carry a slide-in camper, the total cargo load of the truck consists of the camper manufacturer’s weight figure, plus: c the weight of installed additional camper equipment not included in the camper manufacturer’s weight figure, c the weight of camper cargo, c and the weight of occupants in the camper. The total cargo load should not exceed the truck’s pay load weight rating and the camp- er’s center of gravity should fall within the truck’s recommended center of gravity loca- tion zone when installed.

Z X

Payload Weight Capacity (KA24DE Engine)

2WD

King Cab

Manual

Transmission

XE

Federal California Canada

lbs 1312
1312
1312

kg 595
595
595

Automatic

Transmission

XE

lbs 1312
1312
1312

kg 595
595
595

WARNING

Overloading or improper loading can adversely affect vehicle handling, brak- ing and performance and may lead to accidents.

PAYLOAD WEIGHT CAPACITY The payload weight capacity shown on the following pages indicate the maximum total weight of passengers, optional equipment (air conditioning, trailer hitch, etc) and cargo that your vehicle is designed to carry. Before driving a loaded vehicle, confirm that you do not exceed the Gross Vehicle Weight Rating (GVWR) or the Gross Axle Weight Rating (GAWR) for your vehicle. See ‘‘Vehicle Loading Information’’ earlier in this section for details. Also check tires for proper inflation pres- sures. See the tire placard affixed to the glove box lid.

Technical and consumer information 9-19

Z X

K/C

K/C

lbs 1191
1191
1191

lbs 1169
1169
N/A

kg 540
540
540

kg 530
530
N/A

Payload Weight Capacity (VG33E)

2WD

C/C S/B

C/C L/B

K/C

lbs 1036
1036
N/A

kg 470
470
N/A

lbs 1103
1103
1103

kg 500
500
500

lbs 1147
1147
1147

Payload Weight Capacity (VG33ER)

2WD

C/C S/B

C/C L/B

K/C

lbs 1014
1014
N/A

kg 460
460
N/A

lbs 1080
1080
1080

kg 490
490
490

lbs 1080
1080
N/A

kg 520
520
520

kg 490
490
N/A

4WD C/C S/B

C/C L/B

lbs 970
970
N/A

kg 440
440
N/A

lbs 1080
1080
1080

4WD C/C S/B

C/C L/B

lbs 915
915
N/A

kg 415
415
N/A

lbs 1025
1025
1025

kg 490
490
490

kg 465
465
465

Federal California Canada

Federal California Canada

9-20 Technical and consumer information

Z X

MEASUREMENT OF WEIGHTS Secure loose items to prevent weight shifts that could affect the balance of your vehicle. When the truck camper is loaded, drive to a scale and weigh the front and the rear wheels separately to determine axle loads. Individual axle loads should not exceed either of ratings (GAWR). The total of the axle loads should not exceed the gross vehicle weight rating (GVWR). These ratings are given on the vehicle certification label that is located on the driver’s door lock pillar. If weight ratings are exceeded, move or remove items to bring all weights below the ratings.

the gross axle weight

TOWING A TRAILER

CA0009

Your new vehicle was designed to be used primarily to carry passengers and cargo. Remember that towing a trailer will place additional loads on your vehicle’s engine, drive train, steering, braking and other sys- tems. A Nissan Trailer Towing Guide is avail- able from an authorized NISSAN dealer. This guide includes information on trailer towing ability and the special equipment required for proper towing.

MAXIMUM LOAD LIMITS Maximum trailer loads Never allow the total trailer load to exceed the value specified in the following Towing Load/Specification Chart. The total trailer load equals trailer weight plus its cargo weight. c When towing a trailer load of 1,000 lbs. (454 kg) or more, trailers with a brake system MUST be used.

The maximum GCWR (Gross Combined Weight Rating) should not exceed the value specified in the following Towing Load/ Specification Chart. The GCWR equals the combined weight of the towing vehicle (including passengers and cargo) plus the total trailer load. Towing loads greater than these or using improper towing equipment could adversely affect vehicle handling, braking and performance. The ability of your vehicle to tow a trailer is not only related to the maximum trailer loads, but also the places you plan to tow. Tow weights appropriate for level highway driving may have to be reduced on very

Technical and consumer information 9-21

Z X

steep grades or in low traction situations (for example, on slippery boat ramps).

WARNING

Vehicle damage and/or personal injury resulting from improper towing proce- dures are not covered by NISSAN war- ranties. A NISSAN Trailer Towing Guide (U.S. only) containing information on trailer towing ability and the special equipment required may be obtained from an authorized NISSAN dealer.

Tongue load Keep the tongue load between 9 to 11
percent of the total trailer load within the maximum tongue load limits shown in the following Towing Load/Specification Chart. If the tongue load becomes excessive, re- arrange cargo to allow for proper tongue load.

CA0036

Maximum gross vehicle weight/ maximum gross axle weight The gross vehicle weight of the towing vehicle must not exceed the gross vehicle weight rating (GVWR) shown on the FMVSS certification label. The gross ve- hicle weight equals the combined weight of the unloaded vehicle, passengers, luggage, hitch, trailer tongue load and any other optional equipment. In addition, front or rear gross axle weight must not exceed the gross axle weight rating (GAWR) shown on the FMVSS certification label.

9-22 Technical and consumer information

Z X

TOWING LOAD/SPECIFICATION CHART

MODEL

2WD

Unit: lbs (kg)

4WD

WEIGHT

M/T (4cyl)

A/T (4cyl)

M/T (V6)

A/T (V6)

M/T (V6)

A/T (V6)

MAXIMUM

TRAILER WEIGHT*1

MAXIMUM TONGUE

LOAD

3,001 (1,361)

2,000 (907)

300 (136)

200 (91)

Except Supercharger

3,500 (1,588) Supercharger 3,400 (1,542)

Except Supercharger

5,000 (2,268) Supercharger 4,902 (2,223)

Except Supercharger

350 (159)

Except Supercharger

500 (227)

Supercharger

340 (154)

Supercharger

490 (222)

Except S/C C/C L/B

3,500 (1,588) S/C C/C L/B 3,400 (1,542)

Except S/C C/C L/B

5,000 (2,268) S/C C/C L/B 4,902 (2,223)

350 (159)

S/C C/C L/B 340 (154)

Except S/C C/C L/B

500 (227) S/C C/C L/B 490 (222)

GROSS

COMBINED

WEIGHT RATING

7,000 (3,175)

6,000 (2,721)

8,002 (3,629)

9,500 (4,309)

8,002 (3,629)

9,500 (4,309)

RECOMMENDED EQUIPMENT*2

Sway Control

Device

—

Sway Control

Device

Sway Control

Device

Sway Control

Device

Sway Control

Device

*1: ll towing above 1,000 lb (454 kg) requires the use of trailer brakes. NISSAN recommends the use of a tandem axle trailer whenever towing above 3,000

lb (1,361 kg).

*2: A sway control device is recommended for all towing above 2,000 lb (907 kg). Sway control devices are not offered by NISSAN. See a professional

trailer/hitch outlet for a properly designed sway control device for your trailer.

M/T = Manual Transmission A/T = Automatic Transmission 2WD = 2-wheel drive 4WD = 4-wheel drive C/C = Crew Cab L/B = Long Bed S/C = Supercharger

Technical and consumer information 9-23

Z X

TOWING SAFETY Trailer hitch Check the towing capacity of your bumper hitch or receiver-type frame mounted hitch. Choose a proper hitch for your vehicle and trailer. A genuine Nissan trailer hitch is available from your NISSAN dealer. Make sure the trailer hitch is securely attached to the vehicle to help avoid personal injury or property damage due to sway caused by crosswinds, rough road surfaces or passing trucks.

CAUTION

c Special hitches which include frame reinforcements are required for tow- ing above 2,000 lb (907 kg). Suitable genuine NISSAN hitches for pickup trucks and sport utility vehicles are available at an authorized NISSAN dealer.

c The hitch should not be attached to or affect the operation of the impact- absorbing bumper.

c Do not use axle-mounted hitches.

c Do not modify the vehicle exhaust system, brake system, etc. to install a trailer hitch.

c To reduce the possibility of addi- tional damage if your vehicle is struck from the rear, where practical, remove the hitch and/or receiver when not in use. Remove receiver when not in use. After the hitch is removed, seal the bolt holes to pre- vent exhaust fumes, water or dust from entering the passenger com- partment.

c Regularly check that all trailer hitch securely

bolts

are

mounting mounted.

Tire pressures c When towing a trailer, inflate the vehicle tires to the recommended cold tire pres- sure indicated on the tire placard (af- fixed to the inside of the glove box lid). c Trailer tire condition, size, load rating and proper inflation pressure should be in accordance with the trailer and tire manufacturers’ specifications.

9-24 Technical and consumer information

Safety chain Always use suitable safety chains between your vehicle and the trailer. Safety chains should be crossed and should be attached to the hitch, not to the vehicle bumper or axle. Be sure to leave enough slack in the chain to permit turning corners. Trailer lights Trailer lights should comply with Federal and/or local regulations. For assistance in hooking up trailer lights, contact an autho- rized NISSAN dealer. Trailer brakes If your trailer is equipped with a braking system, make sure it conforms to Federal and/or local regulations and that it is prop- erly installed.

WARNING

Never connect a trailer brake system directly to the vehicle brake system.

Pre-towing tips c Be certain your vehicle maintains a level position when a loaded and/or unloaded

Z X

trailer is hitched. Do not drive the vehicle if it has an abnormal nose-up or nose- down condition; check for improper tongue load, overload, worn suspension or other possible causes of either con- dition.

c Always secure items in the trailer to

prevent load shift while driving.

c Be certain your outside mirrors conform to all federal, state or local regulations. If not, install any mirrors required for tow- ing before driving the vehicle.

Trailer towing tips In order to gain skill and an understanding of the vehicle’s behavior, you should prac- tice turning, stopping and backing up in an area which is free from traffic. Steering, stability and braking performance will be somewhat different than under normal driv- ing conditions. c Always secure items in the trailer to

prevent load shift while driving.

c Avoid abrupt starts, acceleration or

stops.

c Avoid sharp turns or lane changes.

c Always drive your vehicle at a moderate

speed.

c Always block the wheels on both vehicle and trailer when parking. Parking on a slope is not recommended; however, if you must do so, and if your vehicle is equipped with automatic transmission, first block the wheels and apply the parking brake, and then move the trans- mission shift selector lever into the P (Park) position. If you move the shift lever to the P (Park) position before blocking the wheels and applying the parking brake, transmission damage could occur.

c When going down a hill, shift into a lower gear and use the engine braking effect. When ascending a long grade, down- shift the transmission to a lower gear and reduce speed to reduce chances of engine overloading and/or overheating. However, for long steep grades, do not stay in 1st or 2nd gear when driving above 35 MPH (56 km/h).

c If

the engine coolant rises to an ex- tremely high temperature when the air conditioning system is on, turn off the air conditioner. Coolant heat can be addi-

tionally vented by opening the windows, switching the fan control to high and setting the temperature control to the HOT position.

c Trailer towing requires more fuel than

normal circumstances.

c Avoid towing a trailer for your vehicle’s

first 500 miles (805 km).

c Have your vehicle serviced more often than at intervals specified in the recom- mended Maintenance Schedule.

c When making a turn, your trailer wheels will be closer to the inside of the turn than your vehicle wheels. To compen- sate for this, make a larger than normal turning radius during the turn.

c Crosswinds and rough roads adversely affect vehicle/trailer handling, possibly causing vehicle sway. When being passed by larger vehicles, be prepared for possible changes in crosswinds that could affect vehicle handling. If swaying does occur, firmly grip the steering wheel, steer straight ahead, and imme- diately (but gradually) reduce vehicle speed. This combination helps to stabi- lize the vehicle. Never increase speed. Technical and consumer information 9-25

Z X

c Be careful when passing other vehicles. Passing while towing a trailer requires considerably more distance than normal passing. Remember the length of the trailer must also pass the other vehicle before you can safely change lanes.

c To maintain engine braking efficiency and electrical charging performance, do not use fifth gear (manual transmission) or overdrive (automatic transmission).

c Avoid holding the brake pedal down too long or too frequently. This could cause the brakes to overheat, resulting in re- duced braking efficiency.

When towing a trailer, change oil in the transmission more frequently. For addi- tional information see the ‘‘Maintenance and do-it-yourself’’ section earlier in this manual.

UNIFORM TIRE QUALITY GRADING

DOT (Department of Transportation) Qual- ity Grades: All passenger car tires must conform to Federal Safety Requirements in addition to these grades. Quality grades can be found where appli- cable on the tire sidewall between tread shoulder and maximum section width. For example: Treadwear 200 Traction AA Temperature A Treadwear Treadwear grade is a comparative rating based on tire wear rate when tested under controlled conditions on specified govern- ment test courses. For example, a tire graded 150 would wear one and a half (1-1/2) times as well on the government course as a tire graded 100. However, relative tire performance depends on actual driving conditions, and may vary signifi- cantly due to variations in driving habits, service practices and differences in road characteristics and climate. Traction AA, A, B and C The traction grades from highest to lowest are AA, A, B, and C. Those grades repre- sent the tire’s ability to stop on wet pave- ment as measured under controlled condi-

tions on specified government test surfaces of asphalt and concrete. A tire marked C may have poor traction performance.

WARNING

The traction grade assigned to your ve- hicle tires is based on straight-ahead braking traction tests, and does not in- clude acceleration, cornering, hydro- planing, or peak traction characteristics.

Temperature A, B and C Temperature grades are A (the highest), B, and C. They represent a tire’s resistance to heat build-up, and its ability to dissipate heat when tested under controlled condi- tions on a specified indoor laboratory test wheel. Sustained high temperature can cause tire material to degenerate, reducing tire life. Excessive temperatures can lead to sudden tire failure. Grade C corresponds to a performance level which all passenger car tires must meet under the Federal Motor Vehicle Safety Standard No. 109. Grades A and B represent higher levels of perfor- mance on laboratory test wheels than the minimum required by law.

9-26 Technical and consumer information

Z X

WARNING

The temperature grade for this tire is established for a tire that is properly inflated and not overloaded. Excessive speed, under inflation, or excessive loading, either separately or in combi- nation, can cause heat build-up and possible tire failure.

c Nissan Canada Inc. 5290 Orbitor Drive Mississauga, Ontario L4W 4Z5

EMISSION CONTROL SYSTEM WARRANTY

Your NISSAN is covered by the following emission warranties. For US 1) Emission Defects Warranty 2) Emission Performance Warranty Details of these warranties may be found with other vehicle warranties in your War- ranty Information Booklet which comes with your NISSAN. If you did not receive a War- ranty Information Booklet, or it becomes lost, you may obtain a replacement by writing to: c Nissan North America, Inc.

Consumer Affairs Department P.O. Box 191
Gardena, CA 90248-0191

For Canada Emission Control System Warranty Details of these warranties may be found with other vehicle warranties in your War- ranty and Roadside Assistance Information Booklet which comes with your NISSAN. If you did not receive a Warranty and Road- side Assistance Information Booklet, or it becomes lost, you may obtain a replace- ment by writing to:

Technical and consumer information 9-27

Z X