Login- Download PDF Manual
-
ON, the audio source will automatically be turned off and the last radio station played will come on.
TUNE (Tuning):
for manual Push the TUNE button tuning. To move quickly through the stations, push and hold the TUNE button.
or
SEEK tuning:
For AM and FM radio
Push the SEEK button to tune from low to high or high to low frequencies and to stop at the next broadcasting station.
or
Black plate (165,1)
For XM Satellite Radio (if so equipped)
Push the SEEK button to tune to the first channel of the next or previous category.
or
SCAN tuning:
Push the SCAN button to tune from low to high frequencies and stops at each broadcasting station for 5 seconds. Pushing the button again during this 5 seconds period will stop SCAN tuning and the radio will remain tuned to that station.
If the SCAN tuning button is not pushed within 5
seconds, SCAN tuning moves to the next station.to
Station memory operations:
Eighteen channels can be set for the SAT (if so equipped) band (6 each for XM1, XM2 and XM3), 12 stations can be set for the FM band (6
each for FM1 and FM2), and 6 can be set for the AM band for easy access.1. Choose the radio band using the radio band
select button.
heard. (The radio mutes when the radio station preset button is pushed.)
4. The station indicator will then come on and the sound will resume. Memorizing is now complete.
5. Other buttons can be set
in the same
manner.
If the battery cable is disconnected, or if the fuse opens, the radio memory will be erased. In that case, reset the desired stations.
Radio Data System (RDS):
RDS stands for Radio Data System, and is a data information service transmitted by some radio stations on the FM band (not AM band) encoded within a regular radio broadcast. Currently, most RDS stations are in large cities, but many stations are now considering broad- casting RDS data.
RDS can display: . Station call sign, such as “WHFR 98.3”. . Station name, such as “The Groove”. . Music or programming type such as “Clas-
2. Tune to the desired station using the SEEK,
sical”, “Country” or “Rock”.
SCAN or TUNE button.
3. Push and hold the desired radio station until a beep sound is
preset button
to
Traffic reports about delays or construction.
If the station broadcasts RDS information, the RDS icon is displayed.
Heater, air conditioner, audio and phone systems 4-23
Model "Z12-D" EDITED: 2009/ 1/ 28
RADIO DISPLAY change:
When the DISP button is pushed during the FM or SAT (if so equipped) radio mode, the radio display will change in the following order.
FM radio: Frequency ↔ PS/PTY
In the FM radio mode, pressing the DISP button will switch the frequency display to the PTY display (if available), and if the DISP button is not pushed again within 5 seconds, it will automatically switch to the PS display. If PTY is not available, pressing the DISP button will only switch between the frequency display and the PS display.
XM Satellite Radio:
Compact Disc (CD) player operation Place the ignition switch in the ACC or ON position, and insert the CD into the slot with the label side facing up. The CD will be guided automatically into the slot and start playing.
After loading the disc, the number of tracks on the disc will appear on the display.
If the radio is already operating, matically turn off and the CD will play.
it will auto-
If the system has been turned off while the CD was playing, pushing the PWR button will start the CD.
Do not use 3.1 in (8 cm) discs.
CD PLAY:
When the CD button is pushed with the system off and the CD loaded, the system will turn on and the CD will start to play.
When the CD button is pushed with the CD loaded and the radio playing, the radio will automatically be turned off and the CD will start to play.
CD play information:
When the DISP button is pushed for less than 1.5 seconds while the CD is being played, the disc information display will change as follows:
4-24 Heater, air conditioner, audio and phone systems
Black plate (166,1)
CD:
CD with MP3 or WMA:
FF (Fast Forward), REW (Re- wind):
CD:
(fast forward) or
When the (rewind) button is pushed while the CD is being played, forwarding or the CD will play while fast rewinding. When the button is released, the CD will return to normal play speed.
CD with MP3 or WMA:
When the button is pushed for less than 1.5 seconds while the CD is being played, the folders in the CD will change.
or
or
When the button is pushed for more than 1.5 seconds while the CD is being played, the CD will play while forwarding or rewinding. When the button is released, the CD
Model "Z12-D" EDITED: 2009/ 1/ 28
Black plate (167,1)
will return to the normal play speed.
APS (Automatic Program Search) FF, APS REW:
(APS FF) button is pushed while When the the CD is being played, the program next to the present one will start to play from its beginning. Push several times to skip through programs. The CD will advance the number of times the button is pushed. (When the last program on the CD is skipped through, the first program will be played.)
When the (APS REW) button is pushed, the program being played returns to its begin- ning. Push several times to skip back through programs. The CD will go back the number of times the button is pushed.
SCAN tuning:
When the SCAN tuning button is pushed for more than 1.5 seconds while the CD is being played, the beginning of all the tracks of CD will be played for 10 seconds in sequence.
Pushing the button again during this 10 second period will stop SCAN tuning.
If the SCAN tuning button is not pushed within 10 seconds, SCAN tuning moves to the next disc program.
RANDOM (RDM)/REPEAT (RPT):
When the RPT button is pushed for less than 1.5 seconds while the CD is being played, the play pattern can be changed as follows:
CD:
CD with MP3 or WMA:
CD EJECT:
When the CD EJECT button is pushed with the CD loaded, the CD will be ejected.
When this button is pushed while the CD is being played, the CD will come out and the system will turn off.
If the CD comes out and is not removed, it will be pulled back into the slot to protect it.
SAA2352
Interface system for iPod® operation Connecting iPod®: The iPod® outlet connector is on the lower center of the instrument panel. Connect the cable *1
as illustrated, and then connect the other end of the cable to your iPod® *2 . Your vehicle is equipped with the specialized cable for connecting the iPod® to your vehicle audio unit. The battery of your iPod® is charged while it is connected to the vehicle if the iPod® supports charging via a FireWire® connection.When the connection is complete, a NISSAN logo will be displayed on the iPod® and an iPod® icon on the audio display illuminates. While connecting the iPod® to the vehicle, the iPod® Heater, air conditioner, audio and phone systems 4-25
Model "Z12-D" EDITED: 2009/ 1/ 28
can only be operated by the vehicle audio controls.
The first generation iPod® classic (Firmware version 1.0.3 or later)
To disconnect the cable from the vehicle outlet, fully depress the center connector button to unlatch the connector and pull the connector straight out of the outlet. To disconnect the cable from the iPod®, fully depress the side connector buttons and pull the iPod® connector straight out of the iPod®. * iPod® is a trademark of Apple Inc., registered in the U.S. and other countries.
Compatibility:
The following models are available:
Third generation iPod® (Firmware version 2.3 or later) (Audiobook and Podcast are not available) Fourth generation iPod® (Firmware version 3.1.1 or later) Fifth generation iPod® (Firmware version 1.1.2 or later) 5.5 generation iPod® (Firmware version 1.2.3 or later) iPod® mini (Firmware version 1.41 or later) iPod® photo (Firmware version 1.2.1 or later) iPod® nano (Firmware version 1.2 or later)
The fourth generation iPod® nano, iPod® touch, the second generation iPod classic and iPhone 3G may not work with the system in some cases. Make sure that your iPod® firmware is updated.
iPod® button:
Place the ignition switch in the ACC or ON position. Then, push the iPod® button to switch to the iPod® mode. If another audio source is playing and the iPod® is connected, pushing the iPod® button changes to the iPod® mode. If the system has been turned off while the iPod® was playing, pushing the PWR button will start the iPod®.
Top menu item selecting:
When the iPod® MENU button is pushed while the iPod® is connected, the interface for iPod® operation is shown on the audio display. The items on the menu list can be scrolled by pushing the SEEK button and the while the iPod® is TUNE button operational. To select an item, push ENTER. The display can be changed as follows:
or
or
4-26 Heater, air conditioner, audio and phone systems
Black plate (168,1)
For more information about each item, see the iPod® Owner’s Manual.
BACK, ENTER button:
. When the ENTER button is pushed while the top menu is displayed, program details are shown on the audio display.
To select the program, push to search using the SEEK and ENTER button. . When the BACK button is pushed, it returns
or
to the previous display.
iPod® play information:
When the DISP button is pushed while a program is being played, the program informa- tion display will change as follows:
* Artist Name will not be displayed for a Podcast.
Model "Z12-D" EDITED: 2009/ 1/ 28
Black plate (169,1)
FF (Fast Forward), REW (Re- wind) button:
or
button is pushed for When the more than 1.5 seconds while the iPod® is playing, the iPod® will play while fast forwarding or rewinding. When the button is released, the iPod® will return to the normal play speed.
or
When the button is pushed for less than 1.5 seconds while the iPod® is playing, the next track or the beginning of the current track on the iPod® will be played.
APS (Automatic Program Search) FF, APS REW button:
or
button is pushed for When the more than 1.5 seconds while the iPod® is playing, numbers of tracks can be skipped through.
or
When the button is pushed for less than 1.5 seconds while iPod® is playing, the next track or the beginning of the current track on the iPod® will be played.
REPEAT (RPT), RANDOM (RDM):
When the RPT button is pushed while a track is being played, the play pattern can be changed as follows:
Except Podcast and Audiobook:
Podcast: ALL REPEAT ↔ TRACK REPEAT
Audiobook:
AUX (Auxiliary) input
AUX IN jack:
The AUX IN jack is located on the audio unit. The AUX IN audio input jack accepts any standard analog audio input such as from a portable cassette tape/CD player, MP3 player or laptop computer.
AUX (Auxiliary) button:
With an AUX device plugged in, push the AUX button repeatedly until the display changes to the AUX mode.
When the AUX button is pushed with no device plugged into the jack, the audio system does not change to the AUX mode.
SAA0451
CD CARE AND CLEANING . Handle a CD by its edges. Never touch the
surface of the disc. Do not bend the disc.
. Always place the discs in the storage case
when they are not being used.
To clean a disc, wipe the surface from the center to the outer edge using a clean, soft cloth. Do not wipe the disc using a circular motion.
Do not use a conventional record cleaner or alcohol intended for industrial use.
. A new disc may be rough on the inner and outer edges. Remove the rough edges by
Heater, air conditioner, audio and phone systems 4-27
Model "Z12-D" EDITED: 2009/ 1/ 28
rubbing the inner and outer edges with the side of a pen or pencil as illustrated.
Without Hands-Free Phone System
SAA2348
Black plate (170,1)
Tuning switch
1. SOURCE select switch 2. VOLUME control switch 3. STEERING WHEEL SWITCH FOR AUDIO CONTROL (if so equipped) The audio system can be operated using the controls on the steering wheel.
SOURCE select switch With the ignition switch placed in the ACC or ON position, push the SOURCE select switch to turn the audio system on.
Push the SOURCE select switch to change the mode. AM, FM, CD, AUX, iPod® (if so equipped) and SAT (if so equipped) If no CD is loaded or AUX and/or iPod® are not connected, the CD, AUX and/or iPod® modes will be skipped.
VOLUME control switch Push up or down the VOLUME control switch to increase or decrease the volume.
Tuning switch
Memory change (radio):
4-28 Heater, air conditioner, audio and phone systems
With Hands-Free Phone System
SAA2349
Push the tuning switch for less than 1.5 seconds to change the next or previous radio preset.
Model "Z12-D" EDITED: 2009/ 1/ 28
SEEK tuning (radio):
Push the tuning switch for more than 1.5
seconds to seek the next or previous radio station.APS (Automatic Program Search) FF, APS REW (CD and iPod®):
Push the tuning switch for less than 1.5 seconds to return to the beginning of the present program or skip to the next program. Push several times to skip back or skip through programs.
This system searches for the blank intervals If there is a blank interval between selections. within one program or there is no interval between programs, the system may not stop in the desired or expected location.
FOLDER change (CD with MP3 or WMA):
Push the tuning switch for more than 1.5
seconds to change the folders (if there are any folders).Black plate (171,1)
ANTENNA
CAUTION
To avoid damaging or deforming the antenna, be sure to fold down (if so equipped) or remove the antenna under the following conditions.
— The vehicle enters a garage with
a low ceiling.
— The vehicle is covered with a car
cover.
. Be sure that antenna is removed before the vehicle enters an auto- matic car wash.
. Always properly tighten the antenna rod during installation. Otherwise, the antenna rod may break during vehicle operation.
Heater, air conditioner, audio and phone systems 4-29
Model "Z12-D" EDITED: 2009/ 1/ 28
Black plate (172,1)
clockwise and tighten.
SAA1236
For FM-AM radio . Adjust the angle of the antenna for the best
reception.
To remove the antenna, hold the bottom of the antenna and turn it counterclockwise.
To install
the antenna,
turn the antenna
4-30 Heater, air conditioner, audio and phone systems
SAA2102
For FM-AM-SAT radio
To remove the antenna, hold the bottom of the antenna and turn it counterclockwise.
To install clockwise and tighten.
the antenna,
turn the antenna
Model "Z12-D" EDITED: 2009/ 1/ 28
Black plate (173,1)
CAR PHONE OR CB RADIO
When installing a car phone or a CB radio in your NISSAN, be sure to observe the following precautions, otherwise the new equipment may adversely affect the electronic control modules and electronic control system harness.
WARNING
. A cellular telephone should not be used while driving so full attention may be given to vehicle operation. Some jurisdictions prohibit the use of cellular telephones while driving.
If you must make a call while your vehicle is in motion, the hands-free cellular phone operational mode (if so equipped) is highly recom- mended. Exercise extreme caution at all times so full attention may be given to vehicle operation.
If a conversation in a moving vehicle requires you to take notes, pull off the road to a safe location and stop your vehicle before doing so.
BLUETOOTH® HANDS-FREE PHONE SYSTEM WITH NISSAN VOICE RECOGNITION (if so equipped)
CAUTION
WARNING
. Keep the antenna as far away as possible from the electronic control modules.
. Keep the antenna wire more than 8
in (20 cm) away from the electronic control system harness. Do not route the antenna wire next to any harness.. Adjust the antenna standing-wave ratio as recommended by the man- ufacturer.
. Connect the ground wire from the
CB radio chassis to the body.
. For details, consult a NISSAN deal-
er.
. Use a phone after stopping your vehicle in a safe location. If you have to use a phone while driving, exercise extreme caution at all times so full attention may be given to vehicle operation.
If you find yourself unable to devote full attention to vehicle operation while talking on the phone, pull off the road to a safe location and stop your vehicle before doing so.
CAUTION
To avoid discharging the vehicle bat- tery, use a phone after starting the engine.
Heater, air conditioner, audio and phone systems 4-31
Model "Z12-D" EDITED: 2009/ 1/ 28
Black plate (174,1)
phone module before using the Bluetooth® Hands-Free Phone System.
. Some Bluetooth® enabled cellular phones may not be recognized by the in-vehicle phone module. Please visit www.nissanusa. com/bluetooth for a recommended phone list.
. You will not be able to use a hands-free
phone under the following conditions:
— Your vehicle is outside of
the cellular
service area.
— Your vehicle is in an area where it
is difficult to receive a cellular signal; such as in a tunnel, in an underground parking garage, near a tall building or in a mountainous area.
— Your cellular phone is locked to prevent it
from being dialed.
. When the radio wave condition is not ideal it may be to hear the other person’s voice
or ambient sound is too loud, difficult during a call.
Immediately after placed in the ON position, impossible to receive a call period of time.
the ignition switch is it may be for a short
. Do not place the cellular phone in an area
Model "Z12-D" EDITED: 2009/ 1/ 28
button
button
1. Volume control switch −/+ 2. PHONE SEND 3. PHONE END 4. Microphone Your NISSAN is equipped with the Bluetooth® Hands-Free Phone System. If you are an owner of a compatible Bluetooth® enabled cellular phone, you can set up the wireless connection between your cellular phone and the in-vehicle phone module. With Bluetooth® wireless tech- nology, you can make or receive a hands-free telephone call with your cellular phone in the vehicle.
Once your cellular phone is paired to the in- vehicle phone module, no other phone connect-
SAA2350
ing procedure is required. Your phone is automatically connected with the in-vehicle phone module when the ignition switch is placed in the ON position with the registered cellular phone turned on and carried in the vehicle. You can register up to 5 different Bluetooth® cellular phones to the in-vehicle phone module. However, you can talk on only one cellular phone at a time. Before using the Bluetooth® Hands-Free Phone System, refer to the following notes. . Set up the wireless connection between a compatible cellular phone and the in-vehicle
4-32 Heater, air conditioner, audio and phone systems
surrounded by metal or far away from the in- vehicle phone module to prevent tone quality degradation and wireless connection dis- ruption.
. While a cellular phone is connected through the the cellular phone may
the Bluetooth® wireless connection, battery power of discharge quicker than usual. If the Bluetooth® Hands-Free Phone System seems to be malfunctioning, please refer to “Troubleshooting guide” later in this section. You can also visit www.nissanusa.com/blue- tooth for troubleshooting help.
. Some cellular phones or other devices may cause interference or a buzzing noise to come from the audio system speakers. Storing the device in a different location may reduce or eliminate the noise.
. Refer to the cellular phone Owner’s Manual regarding the telephone charges, cellular phone antenna and body, etc.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interfer- ence received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 8 in (20
cm) between the radiator and your body. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.USING SYSTEM The NISSAN Voice Recognition system allows hands-free operation of the Bluetooth® Hands- Free Phone System.
If the vehicle is in motion, some commands may not be available so full attention may be given to vehicle operation.
Initialization When the ignition switch is placed in the ON position, NISSAN Voice Recognition is initia- lized, which takes a few seconds. button is pushed before the initialization com- pletes, the system will announce “Hands-free phone system not ready” and will not react to voice commands.
If the
Operating tips To get the best performance out of the NISSAN Voice Recognition system, observe the follow- ing:
Black plate (175,1)
. Wait until the tone sounds before speaking a command. Otherwise, the command will not be received properly.
. Start speaking a command within 5 seconds
after the tone sounds.
. Speak in a natural voice without pausing
between words.
Giving voice commands To operate NISSAN Voice Recognition, push and release the button located on the steering wheel. After the tone sounds, speak a command.
The command given is picked up by the microphone, and voice feedback is given when the command is accepted.
If you need to hear the available commands for the current menu again, say “Help” and the system will repeat them.
If a command is not recognized, the system announces, “Command not recognized. Please try again.” Repeat the command in a clear voice.
If you want to go back to the previous command, you can say “Go back” or “Correction” anytime the system is waiting for a response.
. You can cancel a command when the Heater, air conditioner, audio and phone systems 4-33
Model "Z12-D" EDITED: 2009/ 1/ 28
system is waiting for a response by saying, “Cancel” or “Quit.” The system announces “Cancel” and ends the voice recognition (VR) session. You can also push the button on the steering wheel at any time to end the VR session. Whenever the VR session is canceled, a double beep sounds to indicate you have exited the system.
If you want to adjust the volume of the voice feedback, push the volume control switches (+ or −) on the steering wheel while being provided with feedback. You can also use the radio volume control knob.
How to say numbers:
NISSAN Voice Recognition requires a certain way to speak numbers in voice commands. Refer to the following rules and examples: . Either “zero” or “oh” can be used for “0”.
Example: 1-800-662-6200
—“One eight hundred six six two six two oh
oh”,
—NOT “One eight hundred six six two sixty
two hundred, and
—NOT “One eight oh oh six six two sixty two
hundred.
. Numbers can be spoken in small groups. The system will prompt you to continue entering digits, if desired.
Example: 1-800-662-6200
—“One eight oh oh”
The system repeats the numbers and prompts you to enter more.
—“six six two”
The system repeats the numbers and prompts you to enter more.
—“six two oh oh”
—“One eight oh oh six six two six two oh
oh”, or
—“One eight zero zero six six two six two oh
oh”
. You can say “Star” for * and “Pound” for # at anytime in any position of the phone number. (Available only when using “Call Interna- tional” command.)
. Words can be used for the first 4 digits
Example: 1-555-1212 *123
places only.
Example: 1-800-662-6200
—“One five five five one two one two star
one two three”
4-34 Heater, air conditioner, audio and phone systems
Black plate (176,1)
. Say “plus” for “+” (available only when using
the “Call International” command).
. Say “pause” for a 2 second pause (available
only when storing a phone book number).
See “Making a call by entering a phone number” later in this section and “Call” later in this section for more information.
NOTE: For best results, say phone numbers as single digits.
The voice command “Help” is available at any time. Please say the “Help” command to get information about how to use the system.
Model "Z12-D" EDITED: 2009/ 1/ 28
Black plate (177,1)
a call” later in this section for more informa- tion.)
PHONE END
Push the or end a call.
button to cancel a VR session
Getting started The following procedures will help you get started using the Bluetooth® Hands-Free Phone System with NISSAN Voice Recognition. For additional command options, see “List of voice commands” later in this section.
Choosing a language You can interact with the Bluetooth® Hands-Free Phone System using English, Spanish or French.
4. The system announces the current language and gives you the option to change the language to Spanish (in Spanish) or French (in French). Use the following chart to select the language.
NOTE: You must push the
button or the button within 5 seconds to change
the language.
Current lan-
guage
Press
(TALK/PHONE SEND) to select
English
Spanish
French
Spanish
English
English
Press
(PHONE END)
to select
French
French
Spanish
To change the language, perform the following.
5.
1. Push and hold the
button for more than
5 seconds.
If you decide not to change the language, do not push either button. After 5 seconds, the VR session will end, and the language will not be changed.
2. The system announces: “Press the PHONE SEND ( the hands-free phone system to enter the speaker adapta- tion mode or press the PHONE END ( button to select a different language.”
) button for
3. Press the
button.
For information on speaker adaptation, see “SPEAKER ADAPTATION (SA) MODE” later in this section.
Pairing procedure NOTE: The pairing procedure must be performed when the vehicle is stationary. the vehicle starts moving during the proce- dure, the procedure will be cancelled.
If
Heater, air conditioner, audio and phone systems 4-35
Model "Z12-D" EDITED: 2009/ 1/ 28
SAA2351
TALK/PHONE SEND button
PHONE END button
Control buttons The control buttons for the Bluetooth® Hands- Free Phone System are located on the steering wheel.
TALK/PHONE SEND
Push the or answer an incoming call.
button to initiate a VR session
You can also use the button to skip through system feedback and to enter commands during a call. (See “List of voice commands” later in this section and “During
varies according to each cellular phone. See the cellular phone Owner’s Manual for details. You can also visit www.nissanusa. com/bluetooth for instructions on pairing NISSAN recommended cellular phones.
5. The system asks you to say a name for the
phone *E . If the name is too long or too short, the system tells you, then prompts you for a name again.
Also, if more than one phone is paired and the name sounds too much like a name already used, then prompts you for a name again.
the system tells you,
6. The system asks you to assign a priority level *F . The priority level determines which phone is active when more than one paired Bluetooth® phone is in the vehicle. Follow the instructions provided by the system or see “Setup” later in this section for more information on changing priorities.
7. The system will ask if you would like to select a custom ringtone *G . Follow the instructions provided by the system or see “Setup” later in this section for more information on selecting ringtones.
1. Push the
button on the steering wheel. The system announces the available com- mands.
2. Say: “Setup” *A . The system acknowl- edges the command and announces the next set of available commands.
3. Say: “Pair phone” *B . The system acknowl- edges the command and announces the next set of available commands.
4. Say: “New phone” *C . The system ac- knowledges the command and asks you to initiate pairing from the phone handset *D . When you are asked to enter a PIN code for pairing your Bluetooth® cellular phone, operate it to enter the code “1234”. The code is always “1234” regardless of the number of phones paired.
The pairing procedure of the cellular phone
4-36 Heater, air conditioner, audio and phone systems
Black plate (178,1)
Making a call by entering a phone number
1. Push the
button on steering wheel. A
tone will sound.
2. Say: “Call” *A . The system acknowledges the command and announces the next set of available commands.
International” *B
Say: “Call than 10 digits or any special characters.
to dial more
3. Say the number you wish to call *C . For example, 555-1212 can be said as “five five five one two one two.” (See “How to say numbers” earlier in this section for more information.)
4. When you have finished speaking the phone the system repeats it back and
number, announces the available commands.
5. Say: “Dial” *D . The system acknowledges
the command and makes the call.
For additional command options, see “List of voice commands” later in this section.
Model "Z12-D" EDITED: 2009/ 1/ 28
Black plate (179,1)
Receiving a call When you hear the ringtone, push the button on the steering wheel.
Once the call has ended, push the on the steering wheel.
button
NOTE: If you do not wish to take the call when you hear the ringtone, push the button on the steering wheel to reject the call.
For additional command options, see “List of voice commands” later in this section.
List of voice commands
button on When you push and release the the steering wheel, you can choose from the commands on the Main Menu. The following pages describe these commands and the commands in each sub-menu.
Remember to wait for the tone before speaking.
You can say “Help” to hear the list of commands
currently available anytime the system is waiting for a response.
Call
If you want to end an action without completing it, you can say “Cancel” or “Quit” at anytime the system is waiting for a response. The system will end the VR session. Whenever the VR session is canceled, a double beep is played to indicate you have exited the system.
If you want to go back to the previous command, you can say “Go back” or “Correction” anytime the system is waiting for a response.
When you get used to the menus in the system, you can talk ahead by saying more than one command at a time. For example, say, “Call five five five one two one two” or “Memo pad record.”
Also, when you get used to the system responses, you can skip ahead to the tone by pressing the button on the steering wheel. However, if you press the button when the system is waiting for a response from you it will end the VR session.
(speak name) *A If you have stored entries in the phone book, you can dial a number associated with a name and location. See “Phone book” later in this section to learn how to store entries.
When prompted by the system, say the name of the phone book entry you wish to call. The system acknowledges the name.
If there are multiple locations associated with the name, the system asks you to choose the location.
Once you have confirmed the name and location, the system begins the call.
(speak digits) *B When prompted by the system, say the number you wish to call. (See “How to say numbers” earlier in this section and “Making a call by Heater, air conditioner, audio and phone systems 4-37
Model "Z12-D" EDITED: 2009/ 1/ 28
entering a phone number” earlier in this section for more details.) “Redial” *C Use the Redial command to call the last number that was dialed within the vehicle.
NOTE: The system will not redial the last number dialed by the handset keypad.
If a redial number does not exist, the system announces, “There is no number to redial” and ends the VR session. “Call Back”*D Use the Call Back command to dial the number of the last incoming call within the vehicle.
The system acknowledges the command, re- peats the number and begins dialing.
If a call back number does not exist, the system announces, “There is no number to call back” and ends the VR session.
International
When you would like to enter a phone number other than in 3-3-4 digit format, say “interna- tional”. When the system acknowledges this command, the system will prompt you to speak the number you wish to enter.
During a call During a call there are several command options available. Push the button on the steering wheel to mute the receiving voice and enter commands.
“Help” — The system announces the avail- able commands.
“Go back/Correction” — The system an- nounces “Go back,” ends the VR session and returns to the call.
“Cancel/Quit” — The system announces “Cancel,” ends the VR session and returns to the call.
“Send/Enter/Call/Dial” — Use the Send command to enter numbers during a call. For example, if you were directed to dial an extension by an automated system:
Say: “Send one two three four.”
The system acknowledges the command and sends the tones associated with the numbers. The system then ends the VR session and returns to the call.
“Transfer Call” — Use the Transfer Call command to transfer from the Bluetooth® Hands-Free Phone System to the cellular phone when privacy is desired.
the call
The system announces, “Transfer call. Call
4-38 Heater, air conditioner, audio and phone systems
Black plate (180,1)
transferred to privacy mode.” The system then ends the VR session.
You can also issue the Transfer Call command again to return to a hands-free call through the vehicle.
“Mute” — Use the Mute command to mute your voice so the other party cannot hear it. Use the mute command again to unmute your voice.
NOTE: If the other party ends the call or the cellular phone network connection is lost while the Mute feature is on, the Mute feature may need to be reset to “off.”
Phone book
The phone book stores up to 40 names for each phone paired with the system. Each name can have up to 4 locations/phone numbers asso- ciated with it.
Model "Z12-D" EDITED: 2009/ 1/ 28
NOTE: Each phone has its own separate phone book. You cannot access Phone A’s phone book if you are currently connected with Phone B. “New Entry” *A Use the New Entry command to store a new name in the system.
When prompted by the system, say the name you would like to give the new entry.
For example, say: “Mary.”
If the name is too long or too short, the system tells you, then prompts you for a name again.
Also, if the name sounds too much like a name already stored, then prompts you for a name again.
the system tells you,
Once the system accepts the name and you confirm it the system asks for a location (Home, Office, Mobile or Other).
is correct,
For example, say: “Home.”
The system acknowledges the location.
The system will ask you to say a phone number or to transfer a phone number stored in the cellular phone’s memory.
To enter a phone number by voice command:
For example, say: “five five five one two one two.” (See “How to say numbers” earlier in this section for more information.)
To transfer a phone number stored in the cellular phone’s memory (if so equipped):
Say “Transfer entry.” The system acknowledges the command and asks you to initiate the transfer from the phone handset. The new contact phone number will be transferred from the cellular phone via the Bluetooth® commu- nication link.
The transfer procedure varies according to each cellular phone. See the cellular phone Owner’s for details. You can also visit www. Manual nissanusa.com/bluetooth for instructions on transferring phone numbers from NISSAN re- commended cellular phones.
The system repeats the number and prompts you for the next command. When you have finished entering numbers, choose “Store.”
location and The system confirms the name, number. The system then asks if you would like to store another location for the same name. If you do not wish to store another location, the system ends the VR session. “Edit” *B Use the Edit command to alter an existing phone book entry or to add a 2nd, 3rd or 4th phone
Black plate (181,1)
number to an existing entry.
When prompted by the system, say the name of the entry you wish to edit.
The system acknowledges the name and asks you for the location you would like to edit.
Say the name of acknowledges the location.
the location. The system
The system will ask you to say a phone number or to transfer a phone number stored in the cellular phone’s memory.
To enter a phone number by voice command:
For example, say: “five five five one two one two.” (See “How to say numbers” earlier in this section for more information.)
To transfer a phone number stored in the cellular phone’s memory (if so equipped):
Say “Transfer entry.” The system acknowledges the command and asks you to initiate the transfer from the phone handset. The new contact phone number will be transferred from the cellular phone via the Bluetooth® commu- nication link.
The transfer procedure varies according to each cellular phone. See the cellular phone Owner’s for details. You can also visit www. Manual nissanusa.com/bluetooth for instructions on transferring phone numbers from NISSAN re- Heater, air conditioner, audio and phone systems 4-39
Model "Z12-D" EDITED: 2009/ 1/ 28
Black plate (182,1)
commended cellular phones.
The system repeats the number and prompts you for the next command. When you have finished entering numbers, choose “Store.”
The system confirms the name, location and number, then announces that the entry has been stored. The system then ends the VR session. “Delete” *C Use the Delete command to erase one entry from the phone book, all entries from the phone book, the current redial number or the current call back number.
To delete entries from the phone book, say a name or “All entries” when prompted by the system.
The system acknowledges the command and asks you to confirm the deletion.
To delete the current redial number or call back number, say “redial number” or “call back number” when prompted by the system.
If a redial number or a call back number exists, the system deletes them without asking for confirmation.
If there is no number for the entry you are trying to delete, the system says so and ends the VR session.
“List Names” *D Use the List Names command to hear all the names and locations in the phone book.
“Record” *B The system announces “Recording” and a tone sounds signaling you to begin.
The system recites the phone book entries but does not include the actual phone numbers. When the playback of the list is complete the system returns to the main menu.
You can stop the playback of the list at any time by pushing the button on the steering wheel. The system ends the VR session.
Memo pad
Speak the information you wish to record clearly. When you are done, push the button on the steering wheel.
or
A tone sounds and the system announces “Memo recorded.” Another tone sounds to end the VR session.
If the memo pad is full, the system asks if you wish to record over the oldest memo. “Delete” *C The Delete command erases all memos. The system asks you to confirm this action before deleting all memos.
The Memo Pad records a maximum of 6 voice memos, each up to 20 seconds long. “Play” *A The system plays back all the memos in the order of newest to oldest. The system ends the VR session.
If there are no memos recorded, the system announces “No messages to play.” The system ends the VR session.
4-40 Heater, air conditioner, audio and phone systems
Model "Z12-D" EDITED: 2009/ 1/ 28
Setup
Use the Setup command to change options associated with the Bluetooth® Hands-Free Phone System. “Pair Phone” *A Use the Pair Phone command to pair a phone to the Bluetooth® Hands-Free Phone System.
When you are asked to enter a PIN code for pairing your Bluetooth® cellular phone, operate it to enter the code “1234”. The code is always “1234” regardless of the number of phones paired.
NOTE: The pairing procedure must be performed when the vehicle is stationary. the vehicle starts moving during the proce-
If
dure, the procedure will be cancelled. Also, see “Pairing procedure” earlier in this section for additional information.
Up to 5 phones can be paired. If you try to pair a the system announces that you sixth phone, must replace an existing phone.
first delete one phone or
If you try to pair a phone that has already been paired to your vehicle’s system, the system announces the name the phone is already using. The pairing procedure will then be canceled.
When prompted by the system, choose from the following commands:
“New phone” — see “Pairing procedure” earlier in this section.
“Replace phone” — The system announces the names of the phones already paired and asks which you would like to replace.
Once you say the name of the phone you wish to replace, the paring procedure will begin. (See “Pairing procedure” earlier in this section.)
“List phone” — See the description below.
“List Phones” *B the Use the List Phones command to hear names of If no phones are paired, the system announces, “No
the phones currently paired.
Black plate (183,1)
paired phones to list.” The system then ends the VR session. “Select Phone” *C Use the Select Phone command to select a phone of lesser priority when two or more phones paired with Bluetooth® Hands-Free Phone System are in the vehicle at the same time.
The system asks you to name the phone and confirm the selection.
Once the selection is confirmed, the selected phone remains active until the ignition switch is placed in the off position or you select a new phone. “Change Priority” *D Use the Change Priority command to change the priority level of the active phone.
The priority level determines which phone is active when more than one paired Bluetooth® phone is in the vehicle.
The system states the priority level of the active phone and asks for a new priority level (1, 2, 3, 4, 5).
If the new priority level is already being used for another phone, the two phones will swap priority levels.
Heater, air conditioner, audio and phone systems 4-41
Model "Z12-D" EDITED: 2009/ 1/ 28
For example, if the current priority levels are:
Priority Level 1 = Phone A Priority Level 2 = Phone B Priority Level 3 = Phone C
and you change the priority level of Phone C to Level 1, then:
Priority Level 1 = Phone C Priority Level 2 = Phone B Priority Level 3 = Phone A
“Delete Phone” *E Use the Delete Phone command to delete a specific phone or all phones from the Bluetooth® Hands-Free Phone System.
The system announces the names of the phones already paired with the system and their priority level. The system then gives you the option to delete a specific phone, all phones or listen to the list again.
Once you chose to delete a phone or all phones, the system asks you to confirm this action.
NOTE: When you delete a phone, the associated phone book for that phone will also be deleted. “Select Ringtone” *F Use the Select Ringtone command to select the
tone heard in the vehicle when an incoming call is received.
The system announces the name of the active phone and asks you to choose from the following commands:
“Ringtone” — The system plays a ringtone and asks if you would like to select that tone. If you say no, the system plays the next ringtone available and continues to cycle through the ringtones until you select one or quit.
“Silent” — The system asks you to confirm your wish to disable the ringtone.
“Bluetooth Off” *G Use the Bluetooth® Off command to turn off the Bluetooth Hands-Free Phone System. When Bluetooth® Hands-Free Phone System is off, you will not be able to make or receive calls using NISSAN Voice Recognition. Also, you will not have access to the Phone Book.
You can still use the Memo Pad and access Setup.
SPEAKER ADAPTATION (SA) MODE Speaker Adaptation allows up to two out-of dialect users to train the system to improve recognition accuracy. By repeating a number of commands, the users can create a voice model
4-42 Heater, air conditioner, audio and phone systems
Black plate (184,1)
of their own voice that is stored in the system. The system is capable of storing a different speaker adaptation model for memory A and memory B.
If memory A is available, the system will use memory A to store the model. If memory A is in use and memory B is available, the system will use memory B to store the model. If both of the memory locations are in use, the system will ask the user to select which memory location should be overwritten.
Training procedure The procedure for training a voice is as follows.
1. Position the vehicle in a reasonably quiet
outdoor location.
2. Sit
in the driver’s seat with the engine running, the parking brake applied, and the transmission in P (Park) position.
3. Push and hold the
button for more than
5 seconds.
4. The system announces: “Press the PHONE SEND ( the hands-free phone system to enter the speaker adapta- tion mode or press the PHONE END ( button to select a different language”.
) button for
5. Push the
button.
For information about selecting a different
Model "Z12-D" EDITED: 2009/ 1/ 28
language, see “Choosing a language” earlier in this section.
6. Voice memory A or memory B is selected automatically. If both memory locations are already in use, the system will prompt you to overwrite one. Follow the instructions pro- vided by the system.
7. When preparation is complete and you are
ready to begin, push the
button.
8. The SA mode will be explained. Follow the
instructions provided by the system.
9. When training is finished, the system will tell you an adequate number of phrases have been recorded.
10. The system will ask you to say your name. Follow the instructions to register your name.
11. The system will announce that speaker adaptation has been completed and the system is ready.
The SA mode will stop if:
The seconds in SA mode.
button is pushed for more than 5
The vehicle is driven during SA mode.
The ignition switch is placed in the OFF or LOCK position.
Black plate (185,1)
call three one nine oh two
nine seven pause pause three oh eight
Training phrases During the SA mode, the system instructs you to say the following phrases. (The system will prompt you for each phrase.)
phone book new entry
dial three oh four two nine
delete call back number
setup pair phone
. memo pad play
eight pause nine three two pause seven
. Cancel
. Home
call back number
call star two zero nine five
delete phone
dial eight three zero five one
four three pause two nine pause zero
delete all entries
call seven two four zero nine
delete redial number
phone book list names
dial star two one seven oh
phone book delete entry
. memo pad record . Yes . No
select ringtone
dial eight five six nine two
. Bluetooth on
setup change priority
call eight oh five four one
. Correction
setup change ringtone
dial seven four oh one eight
setup main menu
. Delete . memo pad delete
dial nine seven two six six
call seven six three oh one
Heater, air conditioner, audio and phone systems 4-43
Model "Z12-D" EDITED: 2009/ 1/ 28
Black plate (186,1)
go back
call five six two eight zero
dial six six four three seven
4-44 Heater, air conditioner, audio and phone systems
Model "Z12-D" EDITED: 2009/ 1/ 28
Black plate (187,1)
TROUBLESHOOTING GUIDE The system should respond correctly to all voice commands without difficulty. If problems are encountered, try the following solutions. Where the solutions are listed by number, try each solution in turn, starting with number 1, until the problem is resolved.
Symptom
Solution
1. Ensure that the command format is valid. (See “List of voice commands” earlier in this section.)
2. Ensure that the command is spoken after the tone.
3. Speak clearly without pausing between words and at a level appropriate to the ambient noise level in the vehicle.
System fails to interpret the command correctly.
4. Ensure that the ambient noise level is not excessive (for example, windows open or defroster on). NOTE: If it is too noisy to use the phone, it is likely that the voice commands will not be recognized.
The system consistently selects the wrong entry from the phone book.
5. If more than one command was said at a time, try saying the commands separately.
6. If the system consistently fails to recognize commands, the voice training procedure should be carried out to improve the recognition response for the speaker. (See “SPEAKER ADAPTATION (SA) MODE” earlier in this section.)
1. Ensure that the phone book entry name requested matches what was originally stored. This can be confirmed by using the “List Names” command. (See “Phone book” earlier in this section.)
2. Replace one of the names being confused with a new name.
Heater, air conditioner, audio and phone systems 4-45
Model "Z12-D" EDITED: 2009/ 1/ 28
Black plate (188,1)
MEMO
4-46 Heater, air conditioner, audio and phone systems
Model "Z12-D" EDITED: 2009/ 1/ 28
Black plate (16,1)
5 Starting and driving
Precautions when starting and driving . . . . . . . . . . . . . . . . . . . . . 5-2
Exhaust gas (carbon monoxide) . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
Three-way catalyst. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
Tire Pressure Monitoring System (TPMS). . . . . . . . . . . . . 5-3
Avoiding collision and rollover . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5
Off-road recovery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5
Rapid air pressure loss . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6
Drinking alcohol/drugs and driving. . . . . . . . . . . . . . . . . . . . . . 5-6Ignition switch (models without Intelligent Key system) . . . . . . . . . . . . . . . . . . . 5-7
Continuously Variable Transmission (CVT) . . . . . . . . . . . . 5-7
Manual Transmission (MT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8
Steering lock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8
Key positions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8Push-button ignition switch (models with Intelligent Key system) . . . . . . . . . . . . . . . . . . . . . . . 5-9
Operating range for engine start function . . . . . . . . . . . . . 5-9
Push-button ignition switch operation. . . . . . . . . . . . . . . . 5-10
Push-button ignition switch positions . . . . . . . . . . . . . . . . 5-11
Intelligent Key battery discharge . . . . . . . . . . . . . . . . . . . . . . 5-11
Before starting the engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-12
Starting the engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-12
Models without Intelligent Key system . . . . . . . . . . . . . . . 5-12
Models with Intelligent Key system . . . . . . . . . . . . . . . . . . . 5-13
Driving the vehicle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-14Continuously Variable Transmission (CVT) . . . . . . . . . . 5-14
Manual Transmission (MT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-18
Parking brake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-20
Cruise control (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-21
Precautions on cruise control . . . . . . . . . . . . . . . . . . . . . . . . . . 5-21
Cruise control operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-21
Break-in schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-23
Increasing fuel economy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-23
Sonar system (if so equipped). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-24
Parking/parking on hills. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-25
Electric power steering system . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-26
Brake system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-27
Braking precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-27
Anti-lock Braking System (ABS) . . . . . . . . . . . . . . . . . . . . . . 5-28
Vehicle Dynamic Control (VDC) system . . . . . . . . . . . . . . . . . 5-29
Cold weather driving. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-30
Freeing a frozen door lock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-30
Anti-freeze. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-30
Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-30
Draining of coolant water . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-30
Tire equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-31
Special winter equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-31
Driving on snow or ice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-31
Engine block heater (if so equipped). . . . . . . . . . . . . . . . . 5-31Model "Z12-D" EDITED: 2009/ 1/ 28
Black plate (190,1)
PRECAUTIONS WHEN STARTING AND DRIVING
WARNING
. Do not leave children or adults who would normally require the support of others alone in your vehicle. Pets should not be left alone either. They could accidentally injure themselves or others through inadvertent op- eration of the vehicle. Also, on hot, sunny days, temperatures in a closed vehicle could quickly become high enough to cause severe or possibly fatal injuries to people or animals.
. Properly secure all cargo with ropes or straps to help prevent it from sliding or shifting. Do not place cargo higher than the seatbacks. In a sudden stop or collision, unse- cured cargo could cause personal injury.
EXHAUST GAS (carbon monoxide)
WARNING
. Do not breathe exhaust gases; they contain colorless and odorless car- bon monoxide. Carbon monoxide is
5-2 Starting and driving
dangerous. sciousness or death.
It can cause uncon-
If you suspect that exhaust fumes are entering the vehicle, drive with all windows fully open, and have the vehicle inspected immediately.
. Do not run the engine in closed
spaces such as a garage.
. Do not park the vehicle with the engine running for any extended length of time.
. Keep the back door closed while driving, otherwise exhaust gases could be drawn into the passenger compartment. If you must drive with the back door open, follow these precautions:
1. Open all the windows.
2. Set the
air recirculation to off and the fan control to high to circulate the air.
If electrical wiring or other cable connections must pass to a trailer through the seal on the back door or the body, follow the manufacturer’s recommendation to prevent carbon monoxide entry into the vehicle.
If a special body, camper or other equipment is added for recreational or other usage, follow the manufac- turer’s recommendation to prevent carbon monoxide entry into the vehicle. (Some recreational vehicle appliances such as stoves, refrig- erators, heaters, etc. may also gen- erate carbon monoxide.)
The exhaust system and body should be inspected by a qualified mechanic whenever:
— The vehicle is raised for service. — You suspect that exhaust fumes are entering into the passenger compartment.
— You notice a change in the
sound of the exhaust system.
— You have had an accident invol- ving damage to the exhaust system, underbody, or rear of the vehicle.
THREE-WAY CATALYST The three-way catalyst is an emission control device installed in the exhaust system. Exhaust gases in the three-way catalyst are burned at high temperatures to help reduce pollutants.
Model "Z12-D" EDITED: 2009/ 1/ 28
WARNING
The exhaust gas and the exhaust system are very hot. Keep people, animals or flammable materials away from the exhaust system com- ponents.
. Do not stop or park the vehicle over flammable materials such as dry grass, waste paper or rags. They may ignite and cause a fire.
CAUTION
. Do not use leaded gasoline. Depos- its from leaded gasoline will ser- i o u s l y r e d u c e t h e t h r e e - w a y catalyst’s ability to help reduce ex- haust pollutants.
. Keep your engine tuned up. Mal- functions in the ignition, fuel injec- tion, or electrical systems can cause overrich fuel flow into the three-way catalyst, causing it to overheat. Do not keep driving if the engine mis- fires, or if noticeable loss of perfor- mance or other unusual operating conditions are detected. Have the
vehicle inspected promptly by a NISSAN dealer.
. Avoid driving with an extremely low fuel level. Running out of fuel could cause the engine to misfire, dama- ging the three-way catalyst.
. Do not race the engine while warm-
ing it up.
. Do not push or tow your vehicle to
start the engine.
TIRE PRESSURE MONITORING SYS- TEM (TPMS) Each tire, including the spare (if provided), should be checked monthly when cold and
