2009 Jeep Grand Cherokee SRT8 Owners Manual

are flammable. They could ignite and burn you. Care must be exercised when filling or working around the washer solution.

Exhaust System The best protection against carbon monoxide entry into the vehicle body is a properly maintained engine exhaust system. Whenever a change is noticed in the sound of the exhaust system, when exhaust fumes can be detected inside the vehicle, or when the underside or rear of the vehicle is damaged, have a competent mechanic inspect the com- plete exhaust system and adjacent body areas for broken, damaged, deteriorated, or mispositioned parts. Open seams or loose connections could permit exhaust fumes to seep into the passenger compartment. In addition,

inspect the exhaust system each time the vehicle is raised for lubrication or oil change. Replace as required.

CAUTION!

MAINTAINING YOUR VEHICLE 359

WARNING!

Exhaust gases can injure or kill. They contain carbon monoxide (CO) which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. To avoid breathing CO, fol- low the preceding safety tips.

The catalytic converter requires the use of unleaded fuel only. Leaded gasoline will destroy the effectiveness of the catalyst as an emission control device. Under normal operating conditions, the catalytic con- verter will not require maintenance. However, it is im- portant to keep the engine properly tuned to assure proper catalyst operation and prevent possible catalyst damage.

Damage to the catalytic converter can result if your vehicle is not kept in proper operating condition. In the event of engine malfunction, particularly involv- ing engine misfire or other apparent loss of perfor- mance, have your vehicle serviced promptly. Contin- ued operation of your vehicle with a severe malfunction could cause the converter to overheat, resulting in possible damage to the converter and the vehicle.

NOTE: systems can result against you.

Intentional tampering with emissions control in civil penalties being assessed

360 MAINTAINING YOUR VEHICLE

WARNING!

A hot exhaust system can start a fire if you park over materials that can burn. Such materials might be grass or leaves coming into contact with your exhaust system. Do not park or operate your vehicle in areas where your exhaust system can contact anything that can burn.

In unusual situations involving grossly malfunctioning engine operation, a scorching odor may indicate severe and abnormal catalyst overheating. If this occurs, the vehicle should be stopped, the engine shut off and the vehicle allowed to cool. Thereafter, service, including a tune-up to manufacturer’s specifications, should be ob- tained immediately.

To minimize the possibility of catalyst damage: • Do not shut off the engine or interrupt the ignition when the transmission is in gear and the vehicle is in motion. • Do not try to start engine by pushing or towing the • Do not idle the engine with any spark plug wires disconnected or removed, such as when diagnostic testing, or for prolonged periods during very rough idling or malfunctioning operating conditions.

vehicle.

Cooling System

WARNING!

• When working near the radiator cooling fan, dis- connect the fan motor lead or turn the ignition switch to the OFF position. The fan is temperature controlled and can start at any time the ignition switch is in the ON position. • You or others can be badly burned by hot engine coolant (antifreeze) or steam from your radiator. If you see or hear steam coming from under the hood, do not open the hood until the radiator has had time to cool. Never try to open a cooling system pressure cap when the radiator is hot.

Coolant Checks Check the engine coolant (antifreeze) protection every 12 months (before the onset of freezing weather, where applicable). If the engine coolant (antifreeze) is dirty or

MAINTAINING YOUR VEHICLE 361

rusty in appearance, the system should be drained, flushed and refilled with fresh coolant. Check the front of the A/C condenser for any accumulation of bugs, leaves, etc. If dirty, clean by gently spraying water from a garden hose vertically down the face of the condenser. Check the coolant recovery bottle tubing for brittle rub- ber, cracking, tears, cuts and tightness of the connection at the bottle and radiator. Inspect the entire system for leaks. With the engine at normal operating temperature (but not running), check the cooling system pressure cap for proper vacuum sealing by draining a small amount of engine coolant (antifreeze) from the radiator drain cock. If the cap is sealing properly, the engine coolant (anti- freeze) will begin to drain from the coolant recovery bottle. DO NOT REMOVE THE COOLANT PRESSURE CAP WHEN THE COOLING SYSTEM IS HOT.

362 MAINTAINING YOUR VEHICLE

Cooling System — Drain, Flush and Refill If the engine coolant (antifreeze) is dirty or contains a considerable amount of sediment, clean and flush with a reliable cooling system cleaner. Follow with a thorough rinsing to remove all deposits and chemicals. Properly dispose of the old engine coolant (antifreeze). Refer to the “Maintenance Schedule” in Section 8 for proper maintenance intervals. Selection Of Coolant Use only the manufacturer’s recommended coolant. Re- fer to “Fluids, Lubricants, and Genuine Parts” in this section for the correct fluid type.

CAUTION!

Mixing of engine coolant (antifreeze) other than specified HOAT engine coolant (antifreeze), may result in engine damage and may decrease corrosion protection. If a non-HOAT engine coolant (anti- freeze) is introduced into the cooling system in an emergency, it should be replaced with the specified engine coolant (antifreeze) as soon as possible. Do not use water alone or alcohol based engine coolant (antifreeze) products. Do not use additional rust inhibitors or antirust products, as they may not be compatible with the engine coolant (antifreeze) and may plug the radiator. This vehicle has not been designed for use with Propylene Glycol based engine coolant (antifreeze). Use of Propylene Glycol based engine coolant (anti- freeze) is not recommended.

Adding Coolant Your vehicle has been built with an improved engine coolant (antifreeze) that allows extended maintenance intervals. This engine coolant (antifreeze) can be used up to 5 Years or 102,000 miles (170 000 km) before replace- ment. To prevent reducing this extended maintenance period, it is important that you use the same engine coolant (antifreeze) throughout the life of your vehicle. Please review these recommendations for using Hybrid Organic Additive Technology (HOAT) engine coolant (antifreeze). When adding engine coolant (antifreeze): • The manufacturer

recommends using MOPAR威 Antifreeze/ Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology)

MAINTAINING YOUR VEHICLE 363

• Mix a minimum solution of 50% HOAT engine coolant (antifreeze) and distilled water. Use higher concentra- tions (not to exceed 70%) if temperatures below ⫺34°F (⫺37°C ) are anticipated. • Use only high purity water such as distilled or deion- ized water when mixing the water/engine coolant (antifreeze) solution. The use of lower quality water will reduce the amount of corrosion protection in the engine cooling system.

Please note that it is the owner’s responsibility to main- tain the proper level of protection against freezing ac- cording to the temperatures occurring in the area where the vehicle is operated. NOTE: Mixing engine coolant (antifreeze) types will decrease the life of the engine coolant (antifreeze) and will require more frequent engine coolant (antifreeze) changes.

364 MAINTAINING YOUR VEHICLE

Cooling System Pressure Cap The cap must be fully tightened to prevent loss of engine coolant (antifreeze), and to insure that engine coolant (antifreeze) will return to the radiator from the coolant recovery bottle. The cap should be inspected and cleaned if there is any accumulation of foreign material on the sealing surfaces.

WARNING!

• The warning words “DO NOT OPEN HOT” on the cooling system pressure cap are a safety pre- caution. Never add engine coolant (antifreeze) when the engine is overheated. Do not loosen or remove the cap to cool an overheated engine. Heat causes pressure to build up in the cooling system. To prevent scalding or injury, do not remove the pressure cap while the system is hot or under pressure. • Do not use a pressure cap other than the one specified for your vehicle. Personal injury or en- gine damage may result.

Disposal of Used Engine Coolant Used ethylene glycol based engine coolant (antifreeze) is a regulated substance requiring proper disposal. Check with your local authorities to determine the disposal

rules for your community. To prevent ingestion by ani- mals or children, do not store ethylene glycol based engine coolant (antifreeze) in open containers or allow it to remain in puddles on the ground. If ingested by a child, contact a physician immediately. Clean up any ground spills immediately. Coolant Level The coolant bottle provides a quick visual method for determining that the coolant level is adequate. With the engine off and cold, the level of the engine coolant (antifreeze) in the bottle should be between the ranges indicated on the bottle. The radiator normally remains completely full, so there is no need to remove the radiator cap unless checking for engine coolant (antifreeze) freeze point or replacing en- gine coolant (antifreeze). Advise your service attendant

MAINTAINING YOUR VEHICLE 365

of this. As long as the engine operating temperature is satisfactory, the coolant bottle need only be checked once a month. When additional engine coolant (antifreeze) is needed to maintain the proper level, it should be added to the coolant bottle. Do not overfill. Points to Remember NOTE: When the vehicle is stopped after a few miles (a few kilometers) of operation, you may observe vapor coming from the front of the engine compartment. This is normally a result of moisture from rain, snow, or high humidity accumulating on the radiator and being vapor- ized when the thermostat opens, allowing hot engine coolant (antifreeze) to enter the radiator. If an examination of your engine compartment shows no evidence of radiator or hose leaks, the vehicle may be safely driven. The vapor will soon dissipate.

366 MAINTAINING YOUR VEHICLE

• Do not overfill the coolant recovery bottle. • Check engine coolant (antifreeze) freeze point in the radiator and in the coolant recovery bottle. If engine coolant (antifreeze) needs to be added, contents of coolant recovery bottle must also be protected against freezing. • If frequent engine coolant (antifreeze) additions are required, or if the level in the coolant recovery bottle does not drop when the engine cools, the cooling system should be pressure tested for leaks. • Maintain engine coolant (antifreeze) concentration at 50% HOAT engine coolant (antifreeze) (minimum) and distilled water for proper corrosion protection of your engine which contains aluminum components. • Make sure that the radiator and coolant recovery bottle overflow hoses are not kinked or obstructed.

• Keep the front of the radiator clean. If your vehicle is equipped with air conditioning, keep the front of the condenser clean. • Do not change the thermostat for Summer or Winter operation. If replacement is ever necessary, install only the correct type thermostat. Other designs may result in unsatisfactory coolant performance, poor gas mile- age, and increased emissions.

Brake System

Brake Master Cylinder The fluid level in the master cylinder should be checked whenever the vehicle is serviced, or immediately if the brake system warning light is on. If necessary, add fluid to bring level to the full mark on the side of the reservoir of the brake master cylinder. Be sure to clean the top of the master cylinder area before removing the cap. With disc brakes, fluid level can be expected to fall as the brake

pads wear. Brake fluid level should be checked when pads are replaced. If the brake fluid level is abnormally low, check system for leaks. Refer to “Fluids, Lubricants, and Genuine Parts” in this section for the correct fluid type.

WARNING!

• Use of brake fluid that may have a lower initial boiling point, or is unidentified as to specifica- tions may result in sudden brake failure during hard prolonged braking. You could have an acci- dent. • Overfilling the brake fluid reservoir can result in spilling brake fluid on hot engine parts and the brake fluid catching on fire.

MAINTAINING YOUR VEHICLE 367

Use only brake fluid that has been in a tightly closed container to avoid contamination from foreign matter or moisture.

CAUTION!

Do not allow a petroleum-base fluid to contaminate the brake fluid. Seal damage may result.

Automatic Transmission

Fluid Level Check Regular automatic transmission fluid level checks are not required. For this reason the dipstick is omitted. If you notice fluid loss or gear shift malfunction, have your authorized dealer check the transmission fluid level.

368 MAINTAINING YOUR VEHICLE

CAUTION!

The fluid level is preset at the factory and does not require adjustment under normal operating condi- tions. If a transmission fluid leak occurs, visit your authorized dealer immediately. Severe damage to the transmission may occur. Your authorized dealer has the proper tools to accurately adjust the fluid level.

Appearance Care And Protection From Corrosion

Protection of Body and Paint from Corrosion Vehicle body care requirements vary according to geo- graphic locations and usage. Chemicals that make roads passable in snow and ice, and those that are sprayed on trees and road surfaces during other seasons, are highly corrosive to the metal in your vehicle.

The following maintenance recommendations will enable you to obtain maximum benefit from the corrosion resistance built into your vehicle. What Causes Corrosion? Corrosion is the result of deterioration or removal of paint and protective coatings from your vehicle. The most common causes are: • Road salt, dirt and moisture accumulation. • Stone and gravel impact. • Insects, tree sap and tar. • Salt in the air near seacoast localities. • Atmospheric fallout/industrial pollutants.

Washing • Wash your vehicle regularly. Always wash your ve- hicle in the shade using MOPAR威 Car Wash or a mild car wash soap, and rinse the panels completely with clear water. • If insects, tar, or other similar deposits have accumu- lated on your vehicle, use MOPAR威 Super Kleen Bug and Tar Remover to remove. • Use MOPAR威 Cleaner Wax to remove road film, stains, and to protect your paint finish. Take care never to scratch the paint. • Avoid using abrasive compounds and power buffing that may diminish the gloss or thin out the paint finish.

MAINTAINING YOUR VEHICLE 369

CAUTION!

• Do not use abrasive or strong cleaning materials such as steel wool or scouring powder, which will scratch metal and painted surfaces. • Use of power washers exceeding 1,200 psi (8 274 kPa) can result in damage or removal of paint and decals.

Special Care • If you drive on salted or dusty roads or if you drive near the ocean, hose off the undercarriage at least once a month. • It is important that the drain holes in the lower edges of the doors, rocker panels and tailgate must be kept clear and open.

370 MAINTAINING YOUR VEHICLE

• If you detect any stone chips or scratches in the paint, touch them up immediately. The cost of such repairs is considered the responsibility of the owner. • If your vehicle is damaged due to an accident or similar cause which destroys the paint and protective coating have your vehicle repaired as soon as possible. The cost of such repairs is considered the responsibil- ity of the owner. • If you carry special cargo such as chemicals, fertilizers, de-icer salt, etc., assure that such materials are well packaged and sealed. • If a lot of driving is done on gravel roads, consider • Use MOPAR威 Touch Up Paint on scratches or chips as soon as possible. Your authorized dealer has touch up paint to match the color of your vehicle.

mud or stone shields behind each wheel.

Wheel and Wheel Trim Care All wheels and wheel trim, especially aluminum and chrome plated wheels should be cleaned regularly with a mild soap and water to prevent corrosion. To remove heavy soil, use MOPAR威 Wheel Cleaner or select a nonabrasive, non-acidic cleaner. Do not use scouring pads, steel wool, a bristle brush or metal polishes. Only MOPAR威 cleaners are recommended. Do not use oven cleaner. Avoid automatic car washes that use acidic solutions or harsh brushes that may damage the wheels’ protective finish. YES Essentials威 Fabric Cleaning Procedure – If Equipped YES Essentials威 seats may be cleaned in the following manner: • Remove as much of the stain as possible by blotting • Blot any remaining stain with a clean, damp towel.

with a clean, dry towel.

• For tough stains, apply MOPAR威 Total Clean or a mild soap solution to a clean, damp cloth and remove stain. Use a fresh, damp towel to remove soap residue. • For grease stains, apply MOPAR威 Multi-Purpose Cleaner to a clean, damp cloth and remove stain. Use a fresh, damp towel to remove soap residue. • Do not use any solvents or protectants on Yes Essen-

tials威 products.

Interior Care Use MOPAR威 Total Clean to clean fabric upholstery and carpeting. Interior Trim should be cleaned starting with a damp cloth, a damp cloth with MOPAR威 Total Clean, then MOPAR威 Spot & Stain Remover if absolutely necessary. Do not use harsh cleaners or Armorall. Use MOPAR威 Total Clean to clean vinyl upholstery.

MAINTAINING YOUR VEHICLE 371

Leather Seat Care & Cleaning MOPAR威 Total Clean is specifically recommended for leather upholstery. Your leather upholstery can be best preserved by regular cleaning with a damp soft cloth. Small particles of dirt can act as an abrasive and damage the leather upholstery and should be removed promptly with a damp cloth. Stubborn soils can be removed easily with a soft cloth and MOPAR威 Total Clean. Care should be taken to avoid soaking your leather upholstery with any liquid. Please do not use polishes, oils, cleaning fluids, solvents, deter- gents, or ammonia based cleaners to clean your leather upholstery. Application of a leather conditioner is not required to maintain the original condition.

372 MAINTAINING YOUR VEHICLE

WARNING!

Do not use volatile solvents for cleaning purposes. Many are potentially flammable, and if used in closed areas they may cause respiratory harm.

Glass Surfaces All glass surfaces should be cleaned on a regular basis with MOPAR威 Glass Cleaner or any commercial household-type glass cleaner. Never use an abrasive type cleaner. Use caution when cleaning inside rear windows equipped with electric defrosters. Do not use scrapers or other sharp instruments which may scratch the elements. When cleaning the rear view mirror, spray cleaner on the towel or rag that you are using. Do not spray cleaner directly on the mirror.

Cleaning Plastic Instrument Cluster Lenses The lenses in front of the instruments in this vehicle are molded in clear plastic. When cleaning the lenses, care must be taken to avoid scratching the plastic. 1. Clean with a wet soft rag. A mild soap solution may be used, but do not use high alcohol content or abrasive cleaners. If soap is used, wipe clean with a clean damp rag. 2. Dry with a soft tissue. Seat Belt Maintenance Do not bleach, dye or clean the belts with chemical solvents or abrasive cleaners. This will weaken the fabric. Sun damage will also weaken the fabric. If the belts need cleaning, use MOPAR威 Total Clean, a mild soap solution, or lukewarm water. Do not remove the belts from the vehicle to wash them.

Replace the belts if they appear frayed or worn or if the buckles do not work properly.

FUSES

Interior Fuses The fuse panel is on the lower instrument panel just to the left of the steering column.

MAINTAINING YOUR VEHICLE 373

Fuse Panel

374 MAINTAINING YOUR VEHICLE

Cav- ity

Cartridge

Fuse

Mini-Fuse

Description

Cav- ity

Cartridge

Fuse

Mini-Fuse

Description

30 Amp Green 15 Amp Blue 10 Amp Red 20 Amp Yellow 10 Amp Red Spare (B+) 20 Amp Yellow Spare (B+) 20 Amp Yellow

Audio Amp (B+)

10

10 Amp Red

Sunroof (B+)

Htd Mirror (EBL)

Rr Pwr Out (B+)

Rr HVAC (R/O) (Commander Only)

Door Locks (B+)

Pwr Outlet (B+)

11
12

13

Spare (B+) 10 Amp Red

10 Amp Red

Final Drive Control Module (FDCM), Heater Ventilation/ Air Conditioning (HVAC), Rear Heated Seat Switch, O/H, Heater Ventilation/ Air Conditioning (HVAC) Relay, Rear Park Assist

Door Mods, O/H Lamps, IP Courtesy Lamps, Glove Box Lamp (B+) Autowipe (R/A)

Cav- ity

Cartridge

Fuse

Mini-Fuse

Description

Cav- ity

Cartridge

Fuse

Mini-Fuse

Description

MAINTAINING YOUR VEHICLE 375

14

15

16

17

19

20

21

22

24

25

20 Amp Yellow 10 Amp Red 10 Amp Red

15 Amp Blue Spare (R/S) 10 Amp Red

Cigar Ltr (R/A)

Tire Pressure Tran- sponders (R/O) Upper & Lower Switch Bank, Diag. Connector, Cluster (B+) Flipper Glass (B+)

Steering Column Con- trol Module (SCCM), Cluster (R/S), BUX Trailer Tow

Spare (Acc De- lay) 15 Amp Blue 10 Amp Red

10 Amp Red

Rear Wiper (B+)

Power Distribution Center (PDC) Relays, Powertrain Control Module, A580 (R/S) Shifter Assy (BTSI), Trans. Case Switch, ESP/ABS, Trailer Sway Damp Relay

376 MAINTAINING YOUR VEHICLE

Underhood Fuses (Power Distribution Center)

Power Distribution Center

Cav- ity

Cartridge

Fuse 50 Amp Red

Mini- Fuse

Description

PTC Heater 1 (Diesel Only)

Cav- ity

Cartridge

Fuse 40 Amp Green 50 Amp Red 30 Amp Pink 50 Amp Red 30 Amp Pink 40 Amp Green 40 Amp Green 20 Amp Blue

Mini- Fuse

Description

HID Headlamps

PTC Heater 2 (Diesel Only) Power Outlets

PTC Heater 3 (Diesel Only) Cig Lighter, Trail Tow Batt Power Liftgate (Com- mander Only) Starter, JB Power

Front Power Windows

Cav- ity

Cartridge

Fuse

Mini- Fuse

10
11

12

13

14

15
16

17

18

— 40 Amp Green 30 Amp Pink 40 Amp Green 30 Amp Pink — 50 Amp Red 30 Amp Pink 40 Amp Green

Cartridge

Fuse 40 Amp Green 30 Amp Pink

Description

Spare HVAC Blower

Rear Wiper, Ign R/O

Rear Window Defroster (EBL)/Heated Mirror Rear HVAC (If Equipped) Spare ASD

ABS Pump

Accessory Delay, Seats

Cav- ity

19

20

21

22

23

24

25

26

MAINTAINING YOUR VEHICLE 377

Mini- Fuse

Description

JB Power

Wiper Motor

Fuel Pump

TCM, A/C Clutch

Power Inverter

Rear Heated Seats

Final Drive Control Module (FDCM) Brake Lamps

20 Amp Yellow 20 Amp Yellow 25 Amp Natural 20 Amp Yellow 20 Amp Yellow 15 Amp Blue

378 MAINTAINING YOUR VEHICLE

Cav- ity

Cartridge

Fuse

27

28

29

30
31
32

33

34
35

Mini- Fuse 20 Amp Yellow

30 Amp Green 20 Amp Yellow — — 15 Amp Blue 20 Amp Yellow — 20 Amp Yellow

Description

HD Washer (If Equipped) (Export Only) ABS Valves

PCM Batt (Gasoline Only) Spare Spare Powertrain Control Module (Diesel Only) Final Drive Control Module (FDCM) E-Diff Spare Trail-Tow Mod (Export Only)

Cav- ity

Cartridge

Fuse

36
37

38

39

40

41

42
43

44

Mini- Fuse

— 20 Amp Yellow 20 Amp Yellow 20 Amp Yellow 25 Amp Natural 20 Amp Yellow — 25 Amp Natural —

Description

Spare Ignition Switch

HID Left

HID Right

Next Generation Con- troller (NGC), Injectors Subwoofer (SRT Only)

Spare Coils, Actuators

Spare

Underhood Fuses (Integrated Power Module)

MAINTAINING YOUR VEHICLE 379

Cav- ity

Cartridge

Fuse

Mini-Fuse

Description

10

12

13

14

15

16

17

10 Amp Red 10 Amp Red 20 Amp Yellow 20 Amp Yellow 20 Amp Yellow 20 Amp Yellow 20 Amp Yellow 20 Amp Yellow

Trailer-Tow Park Lamps Rt Park Lamps

Front Control Module (FCM) Batt #4
Front Control Module (FCM) Batt #2
Adjustable Pedal

Ft Fog Lamps

Horn

Rear Fog Lamps (Ex- port Only)

Integrated Power Module

Cav- ity

Cartridge

Fuse

Mini-Fuse

Description

10 Amp Red

Lt Park Lamps

380 MAINTAINING YOUR VEHICLE

Cav- ity

Cartridge

Fuse

Mini-Fuse

Description

Cav- ity

Cartridge

Fuse

18

19

20

21

22

23

27

28

20 Amp Yellow 20 Amp Yellow 20 Amp Yellow 20 Amp Yellow

Front Control Module (FCM) Batt #1
Lt Trailer-Tow Stop/ Turn Front Control Module (FCM) Batt #3
Rt Trailer-Tow Stop/ Turn Final Drive Control Module (FDCM) MOD Radiator Fan

15 Amp Blue 20 Amp Yellow

Ignition Off Draw (IOD) #1
Ignition Off Draw (IOD) #2

30 Amp Pink

50 Amp Red

29

30

Mini-Fuse

Description

10 Amp Red 10 Amp Red

Occupant Restraint Controller (ORC) R/S Occupant Restraint Controller (ORC) R/O

labeled Ignition-Off Draw (IOD#1).

VEHICLE STORAGE If you are leaving your vehicle dormant for more than 21 days you may want to take steps to protect your battery. You may: • Remove fuse #27 in the Intelligent Power Module • Or, disconnect the negative cable from the battery. • Anytime you store your vehicle, or keep it out of service (i.e. vacation) for two weeks or more, run the air conditioning system at idle for about five minutes in the fresh air and high blower setting. This will

ensure adequate system lubrication to minimize the possibility of compressor damage when the system is started again.

REPLACEMENT BULBS

Interior Lights Bulb Type Glove Box Light . . . . . . . . . . . . . . . . . . . . . . . . . 194
Grab Handle Light . . . . . . . . . . . . . . . . L002825W5W Overhead Console Reading Lights . . . . . . . . . . VT4976
Rear Cargo Light . . . . . . . . . . . . . . . . . . . . . . . 214–2
Visor Vanity Light . . . . . . . . . . . . . . . . . . . . . V26377
Underpanel Courtesy Lights. . . . . . . . . . . . . . . . . 906
Instrument Cluster (General Illumination) . . . . . . . 103
Telltale/Hazard Light . . . . . . . . . . . . . . . . . . . . . . 74

MAINTAINING YOUR VEHICLE 381

Exterior Lights Bulb Type Backup Lights . . . . . . . . . . . . . . . . . . . . . . . . . 3157K Front Fog Lights . . . . . . . . . . . . . . . . . . . . . . . . 9145
Front Park/Turn Light . . . . . . . . . . . . . . . . . . . 3157A Front Side Marker . . . . . . . . . . . . . . . . . . . . . . W5W Headlights (Low Beam) . . . . . . . . . . . . . . . . . . . 9006
Headlights (High Beam) . . . . . . . . . . . . . . . . . . . 9005
Rear Turn/Stop/Tail Lights . . . . . . . . . . . . . . . 3157K NOTE: Numbers refer to commercial bulb types that can be purchased from your authorized dealer. If a bulb needs to be replaced, visit your authorized dealer or refer to the applicable Service Manual.

382 MAINTAINING YOUR VEHICLE

BULB REPLACEMENT

High Intensity Discharge Headlights (HID) — If Equipped The headlights are a type of high voltage discharge tube. High voltage can remain in the circuit even with the headlight switch off and the key removed. Because of this, you should not attempt to service a headlight bulb yourself. If a headlight bulb fails, take your vehicle to an authorized dealer for service.

WARNING!

A transient high tension occurs at the bulb sockets of High Intensity Discharge (HID) headlights when the headlight switch is turned ON. It may cause serious electrical shock or electrocution if not serviced prop- erly. See your authorized dealer for service.

NOTE: On vehicles equipped with High Intensity Dis- charge Headlights (HID), when the headlights are turned on, there is a blue hue to the lights. This diminishes and becomes more white after approximately 10 seconds, as the system charges. Headlight

1. Open the hood. 2. Turn the low or high beam bulb one–quarter turn counterclockwise to remove from housing.

MAINTAINING YOUR VEHICLE 383

3. Disconnect the electrical connector and replace the bulb.

CAUTION!

Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with any oily surface, clean the bulb with rubbing alcohol.

1 — High Beam Bulb 2 — Low Beam Bulb

3 — Turn Signal Bulb

384 MAINTAINING YOUR VEHICLE

Front Turn Signal 1. Open the hood. 2. Turn the turn signal bulb one–quarter turn counter- clockwise to remove from housing.

1 — High Beam Bulb 2 — Low Beam Bulb

3 — Turn Signal Bulb

3. Disconnect the electrical connector and replace the bulb.

CAUTION!

Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with any oily surface, clean the bulb with rubbing alcohol.

Front Fog Light

1. Reach behind the front fascia from under the vehicle. 2. Turn the front fog light bulb one–quarter turn coun- terclockwise to remove from housing. 3. Disconnect the electrical connector and replace bulb.

CAUTION!

Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with any oily surface, clean the bulb with rubbing alcohol.

Rear Tail, Stop, Turn Signal, And Backup Lights

1. Raise the liftgate. 2. Remove the two Torx fasteners.

MAINTAINING YOUR VEHICLE 385

386 MAINTAINING YOUR VEHICLE

3. Squeeze the socket assembly tabs to remove it from the housing.

Center High-Mounted Stop Light (CHMSL)

1. Remove the two screws securing the CHMSL.

3 — Back-Up Light Bulb

1 — Tail/Stop Light Bulb 2 — Tail/Turn Signal Bulb 4. Pull the bulb to remove it from the socket. 5. Replace the bulb, reinstall the socket, and reattach the light assembly.

2. Twist the bulb socket to remove from the CHMSL housing. 3. Pull the bulb out of the socket. 4. Replace the bulb, reinstall the socket and reattach the CHMSL.

FLUID CAPACITIES

Fuel (Approximate) Engine Oil with Filter 6.1 Liter Engine (SAE 0W-40, API Certified) Cooling System * 6.1 Liter Engine (MOPAR威 Engine Coolant/Antifreeze 5
Year/100,000 Mile Formula) * Includes heater and coolant recovery bottle filled to MAX level.

MAINTAINING YOUR VEHICLE 387

U.S.

21 Gallons

7 Quarts

14.8 Quarts

Metric 79 Liters

6.6 Liters

14 Liters

388 MAINTAINING YOUR VEHICLE

FLUIDS, LUBRICANTS, AND GENUINE PARTS

Engine Component Engine Coolant

Engine Oil (6.1L Engine)

Oil Filter (6.1L Engine) Spark Plugs Fuel Selection (6.1L Engine)

Fluid, Lubricant, or Genuine Part MOPAR威 Antifreeze/Coolant 5 Year/100,000 Mile Formula HOAT (Hybrid Organic Additive Technology) For best performance and maximum protection under all types of operating conditions, the manufacturer only recommends full synthetic engine oils that meet the American Petroleum Institute (API) categories of SM or SM/CF, and meet the requirements of Chrysler Material Standard MS-10725. The manu- facturer recommends the use of a full synthetic engine oil, such as Mobil 1
SAE 0W-40 or equivalent. MOPAR威 Engine Oil Filter (P/N 04884899AB) or equivalent. PLZTR5A—13 (Gap 0.050 in [1.27 mm]) Premium Unleaded 91 Octane Only or Higher.

Chassis Component Automatic Transmission Transfer Case

Axle Differential (Front-Rear)

Brake Master Cylinder

Power Steering Reservoir

MAINTAINING YOUR VEHICLE 389

Fluid, Lubricant, or Genuine Part MOPAR威 ATF+4 Automatic Transmission Fluid MOPAR威 NV146 Transfer Case Fluid or equivalent. Usage of other fluid/ lubricants is NOT recommended. MOPAR威 Synthetic Gear & Axle Lubricant SAE 75W-140 (API-GL5) or equivalent. MOPAR威 DOT 3 Brake Fluid, SAE J1703 should be used. If DOT 3, SAE J1703 brake fluid is not available, then DOT 4 is acceptable. Use only rec- ommended brake fluids. This system requires the use of MOPAR威 Hydraulic System Power Steer- ing Fluid (P/N 05142893AA) or equivalent, which meets Chrysler Material Standard MS-10838.

MAINTENANCE SCHEDULES

CONTENTS

䡵 Emissions Control System Maintenance . . . . . . 392
䡵 Maintenance Schedules . . . . . . . . . . . . . . . . . 392

▫ Required Maintenance Intervals . . . . . . . . . . 394

M

392 MAINTENANCE SCHEDULES

EMISSIONS CONTROL SYSTEM MAINTENANCE The Scheduled Maintenance services listed in bold type must be done at the times or mileages specified to ensure the continued proper functioning of the emissions control system. These and all other maintenance services in- cluded in this manual, should be done to provide best vehicle performance and reliability. More frequent main- tenance may be needed for vehicles in severe operating conditions, such as dusty areas and very short trip driving. Inspection and service should also be done anytime a malfunction is suspected. NOTE: Maintenance, replacement or repair of the emis- sions control devices and systems on your vehicle may be performed by any automotive repair establishment or individual using any automotive part that has been certified pursuant to U.S. EPA or in the State of Califor- nia, California Air Resources Board regulations.

Information Center

MAINTENANCE SCHEDULES The oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance. On Electronic Vehicle (EVIC) equipped vehicles “Oil Change Required” will be dis- played in the EVIC and a single chime will sound, indicating that an oil change is necessary. Based on engine operation conditions the oil change indicator message will illuminate, this means that service is required for your vehicle. Have your vehicle serviced as soon as possible, within the next 500 miles (805 km). NOTE: • The oil change indicator message will not monitor the time since the last oil change. Change your vehicle’s oil if it has been 6 months since your last oil change even if the oil change indicator message is NOT illuminated.

vehicle off-road for an extended period of time.

• Change your engine oil more often if you drive your • Under no circumstances should oil change intervals exceed 6,000 miles (10,000 km) or 6 months, whichever comes first.

Your authorized dealer will reset the oil change indicator message after completing the scheduled oil change. If this scheduled oil change is performed by someone other than your authorized dealer the message can be reset by referring to the steps described under ”Electronic Vehicle Information Center” in Section 4 of this manual. At Each Stop for Fuel • Check the engine oil level about 5 minutes after a fully warmed engine is shut off. Checking the oil level while the vehicle is on level ground will improve the accu- racy of the oil level reading. Add oil only when the level is at or below the ADD or MIN mark.

• Check the windshield washer solvent and add if

MAINTENANCE SCHEDULES 393

required.

damage.

Once a Month • Check tire pressure and look for unusual wear or • Inspect the battery and clean and tighten the terminals • Check the fluid levels of coolant reservoir, brake master cylinder, power steering and transmission and add as needed. • Check all lights and other electrical items for correct

as required.

operation.

At Each Oil Change • Change the engine oil filter. • Inspect the brake hoses and lines.

394 MAINTENANCE SCHEDULES

CAUTION!

Failure to perform the required maintenance items may result in damage to the vehicle.

Required Maintenance Intervals Refer to the Maintenance Schedules on the following pages for the required maintenance intervals.

6,000 Miles (10,000 km) or 6 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil

filter.

MAINTENANCE SCHEDULES 395

12,000 Miles (20,000 km) or 12 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter.

If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary. Inspect the brake linings, replace if necessary. Inspect the CV joints. Perform the first inspection at 12,000 miles (20 000 km) or 12 months. Inspect exhaust system. Perform the first inspection at 12,000 miles (20 000 km) or 12 months.

Odometer Reading

Repair Order #

Date

Dealer Code

Odometer Reading

Repair Order #

Date

Dealer Code

Signature Authorized Chrysler Dealer

Signature Authorized Chrysler Dealer

❏ ❏ ❏ ❏ M

396 MAINTENANCE SCHEDULES

18,000 Miles (30,000 km) or 18 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil

filter.

30,000 Miles (50,000 km) or 30 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil

filter.

❏ Replace the engine air cleaner filter. ❏ Drain the transfer case and refill. ❏ Adjust parking brake on vehicles

equipped with four-wheel disc brakes.

24,000 Miles (40,000 km) or 24 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil

filter. If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary. Inspect the brake linings, replace if necessary. Inspect the CV joints. Inspect exhaust system. Inspect the front suspension, tie rod ends and boot seals; replace if necessary.

Odometer Reading

Date

Odometer Reading

Date

Odometer Reading

Repair Order #

Dealer Code

Repair Order #

Dealer Code

Repair Order #

Date

Dealer Code

Signature Authorized Chrysler Dealer

Signature Authorized Chrysler Dealer

Signature Authorized Chrysler Dealer

❏ ❏ ❏ ❏ ❏ 42,000 Miles (70,000 km) or 42 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil

filter.

36,000 Miles (60,000 km) or 36 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil

filter. If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary. Inspect the brake linings, replace if necessary.

MAINTENANCE SCHEDULES 397

48,000 Miles (80,000 km) or 48 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil

filter. If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary. Inspect the brake linings; replace if necessary. Inspect the CV joints. Inspect exhaust system. Inspect the front suspension, tie rod ends and boot seals; replace if necessary.

Odometer Reading

Date

Odometer Reading

Date

Odometer Reading

Repair Order #

Dealer Code

Repair Order #

Dealer Code

Repair Order #

Date

Dealer Code

Signature Authorized Chrysler Dealer

Signature Authorized Chrysler Dealer

Signature Authorized Chrysler Dealer

❏ ❏ ❏ ❏ ❏ ❏ ❏ M

398 MAINTENANCE SCHEDULES

54,000 Miles (90,000 km) or 54 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil

filter.

60,000 Miles (100,000 km) or 60 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Replace the engine air cleaner filter.

Inspect the brake linings; replace if necessary.

❏ Adjust parking brake on vehicles equipped with four-wheel disc brakes. ❏ Change the automatic transmission fluid and filter(s) if using your vehicle for any of the

following: police, taxi, fleet, or frequent trailer towing.

❏ Drain the transfer case and refill.

Inspect the accessory drive belt(s), replace if necessary.

Odometer Reading

Repair Order #

Date

Dealer Code

Odometer Reading

Repair Order #

Date

Dealer Code

Signature Authorized Chrysler Dealer

Signature Authorized Chrysler Dealer

❏ ❏ MAINTENANCE SCHEDULES 399

78,000 Miles (130,000 km) or 78 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil

filter.

66,000 Miles (110,000 km) or 66 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil

filter.

72,000 Miles (120,000 km) or 72 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil

filter. If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary. Inspect the brake linings; replace if necessary. Inspect the CV joints. Inspect exhaust system. Inspect the front suspension, tie rod ends and boot seals; replace if necessary.

Odometer Reading

Date

Odometer Reading

Date

Odometer Reading

Repair Order #

Dealer Code

Repair Order #

Dealer Code

Repair Order #

Date

Dealer Code

Signature Authorized Chrysler Dealer

Signature Authorized Chrysler Dealer

Signature Authorized Chrysler Dealer

❏ ❏ ❏ ❏ ❏ M

400 MAINTENANCE SCHEDULES

84,000 Miles (140,000 km) or 84 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil

filter. If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary. Inspect the brake linings; replace if necessary.

90,000 Miles (150,000 km) or 90 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil

filter.

❏ Replace the engine air cleaner filter. Inspect and replace PCV valve if necessary. †

❏ Drain the transfer case and refill. ❏ Adjust parking brake on vehicles

equipped with four-wheel disc brakes.

96,000 Miles (160,000 km) or 96 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil

filter. If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary. Inspect the brake linings; replace if necessary. Inspect the CV joints. Inspect exhaust system. Inspect the front suspension, tie rod ends and boot seals; replace if necessary.

Odometer Reading

Date

Odometer Reading

Date

Odometer Reading

Repair Order #

Dealer Code

Repair Order #

Dealer Code

Repair Order #

Date

Dealer Code

Signature Authorized Chrysler Dealer

Signature Authorized Chrysler Dealer

Signature Authorized Chrysler Dealer

❏ ❏ ❏ ❏ ❏ ❏ ❏ ❏ 102,000 Miles (170,000 km) or 102 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil

filter. Replace the spark plugs. Flush and replace the engine coolant.

108,000 Miles (180,000 km) or 108 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil

filter. If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary. Inspect the brake linings; replace if necessary.

MAINTENANCE SCHEDULES 401

114,000 Miles (190,000 km) or 114 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil

filter.

Odometer Reading

Date

Odometer Reading

Date

Odometer Reading

Repair Order #

Dealer Code

Repair Order #

Dealer Code

Repair Order #

Date

Dealer Code

Signature Authorized Chrysler Dealer

Signature Authorized Chrysler Dealer

Signature Authorized Chrysler Dealer

❏ ❏ ❏ ❏ M

402 MAINTENANCE SCHEDULES

120,000 Miles (200,000 km) or 120 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter. ❏ Replace the engine air cleaner filter.

Inspect the brake linings; replace if necessary.

❏ Adjust parking brake on vehicles equipped with four-wheel disc brakes.

126,000 Miles (210,000 km) or 126 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil

filter.

Inspect the CV joints. Inspect exhaust system.

❏ Change the automatic transmission fluid and filter.

Inspect the front suspension, tie rod ends and boot seals; replace if necessary.

❏ Drain the transfer case and refill.

Inspect the accessory drive belt(s), replace if necessary.

Odometer Reading

Repair Order #

Date

Dealer Code

Odometer Reading

Repair Order #

Date

Dealer Code

Signature Authorized Chrysler Dealer

Signature Authorized Chrysler Dealer

❏ ❏ ❏ ❏ ❏ 132,000 Miles (220,000 km) or 132 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil

filter. If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary. Inspect the brake linings; replace if necessary.

MAINTENANCE SCHEDULES 403

138,000 Miles (230,000 km) or 138 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil

144,000 Miles (240,000 km) or 144 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil

filter.

filter. If using your vehicle for any of the following: Dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary. Inspect the brake linings; replace if necessary. Inspect the CV joints. Inspect exhaust system. Inspect the front suspension, tie rod ends and boot seals; replace if necessary.

Odometer Reading

Date

Odometer Reading

Date

Odometer Reading

Repair Order #

Dealer Code

Repair Order #

Dealer Code

Repair Order #

Date

Dealer Code

Signature Authorized Chrysler Dealer

Signature Authorized Chrysler Dealer

Signature Authorized Chrysler Dealer