2008 Hyundai Tiburon Owners Manual

Parking Brake/ Low Brake Fluid Level Warning Light

CRUISE SET Indicator Light (If installed)

Charging System Warning Light

Door Ajar Warning Light and Chime

Electronic Stability Control (ESC) Indicator Lights (If installed)

TPMS (Tire Pressure Monitoring System) Malfunction Indicator

Low Fuel Level Warning Light

Low Tire Pressure Telltale

Tail Gate Open Warning Light

F10

* More detailed explanations of these items will be found beginning on page 1-48.

FEATURES OF YOUR HYUNDAI

Fuel Recommendations ................................................ 1-2
Breaking in Your New Hyundai ..................................... 1-3
Keys .............................................................................. 1-3
Door (Theft-Alarm System) .................................... 1-4, 1-6
Power Windows ............................................................ 1-9
Seats ........................................................................... 1-10
Seat Belts.................................................................... 1-16
Child Restraint System ............................................... 1-22
Supplemental Restraint (AIRBAG) System (SRS) ..... 1-30
Instrument Cluster and Indicator Lights ...................... 1-46
Warning and Indicator Lights ...................................... 1-48
Multi-Function Light Switch ......................................... 1-58
Windshield Wiper/Washer ........................................... 1-60
Sunroof ....................................................................... 1-66
Mirror ........................................................................... 1-70
Hood Release ............................................................. 1-73
Cruise Control ............................................................. 1-79
Audio Remote Control Switch ..................................... 1-83
Heating and Cooling Control ....................................... 1-84
Stereo Sound System ............................................... 1-102
Antenna ..................................................................... 1-104
Audio System ............................................................ 1-105

1FEATURES OF YOUR HYUNDAI

FUEL RECOMMENDATIONS

B010A02JM-AAT Use Unleaded Gasoline

B010B01A-AAT What About Gasohol?

B010D01A-AAT Do Not Use Methanol

Fuels containing methanol (wood alcohol) should not be used in your Hyundai. This type of fuel can reduce vehicle performance and damage components of the fuel system.

CAUTION:

Your Hyundai's New Vehicle Limited War- ranty may not cover damage to the fuel system and any performance problems that are caused by the use of fuels containing methanol or fuels containing MTBE (Methyl Tertiary Butyl Ether) over 15.0% vol. (Oxy- gen Content 2.7% weight.)

Gasohol (a mixture of 90% unleaded gasoline and 10% ethanol or grain alcohol) may be used in your Hyundai. However, if your engine devel- ops driveability problems, the use of 100% unleaded gasoline is recommended. Fuels with unspecified quantities of alcohol, or alcohols other than ethanol, should not be used.

B010C01A-AAT Use of MTBE

Hyundai recommends that fuels containing MTBE (Methyl Tertiary Butyl Ether) over 15.0% vol. (Oxygen Content 2.7% weight) should not be used in your Hyundai. Fuel containing MTBE over 15.0% vol. (Oxygen Content 2.7% weight) may reduce vehicle per- formance and produce vapor lock or hard starting.

UNLEADED FUEL ONLY

OGK016100N Unleaded gasoline with a Pump Octane Rating of 87 (Research Octane Number 91) or higher must be used in your Hyundai.

WARNING:

o Do not "top off" after the nozzle auto-

matically shuts off when refueling.

o Tighten the cap until it clicks, otherwise

the "

" light will illuminate.

o Always check that the fuel cap is in- stalled securely to prevent fuel spillage in the event of an accident.

BREAKING IN YOUR NEW HYUNDAI

KEYS

B010E01A-AAT Gasolines for Cleaner Air

B020A01S-AAT During the First 1,200 Miles (2,000 Km)

B030A01A-AAT

To help contribute to cleaner air, Hyundai rec- ommends that you use gasolines treated with detergent additives, which help prevent deposit formation in the engine. These gasolines will help the engine run cleaner and enhance per- formance of the Emission Control System.

No formal "break-in" procedure is required with your new Hyundai. However, you can contrib- ute to the economical operation and durability of your Hyundai by observing the following recom- mendations during the first 1,200 miles (2,000
km).

FEATURES OF YOUR HYUNDAI

B010F01A-AAT Operation in Foreign Countries

If you are going to drive your Hyundai in another country, be sure to:

o Observe all regulations regarding registra-

tion and insurance.

o Determine that acceptable fuel is available.

o Don't drive faster than 55 MPH (88 km/h). o While driving, keep your engine speed (rpm, or revolutions per minute) between 2,000
rpm and 4,000 rpm.

o Use moderate acceleration. Don't start quickly or depress the accelerator pedal fully.

o For the first 200 miles (300 km), try to avoid

hard stops.

o Don't lug the engine (in other words, don't drive so slowly in too high a gear that the engine "bucks"-shift to a lower gear).

o Whether going fast or slow, vary your speed

o Don't let the engine idle longer than 3 minutes

from time to time.

at one time.

o Don't tow a trailer during the first 1,200 miles

(2,000 km) of operation.

OMC025001

For greater convenience, the same key oper- ates all the locks in your Hyundai. However, because the doors can be locked without a key, carrying a spare key is recommended in case you accidentally lock one key inside the car.

1FEATURES OF YOUR HYUNDAI

B030B01S-AAT Record Your Key Number

B030C01Y-AAT Illuminated Ignition Switch (If installed)

B030B01MC

A code number is stamped on the key number plate that came with the keys to your Hyundai. This key number plate should be kept in a safe place, not in the vehicle. The key number should also be recorded in a place where it can be found in an emergency.

If you need additional keys, or if you should lose your keys, your authorized Hyundai dealer can make new keys if you can supply the key number.

B030C01E-1

Whenever a door is opened, the ignition switch will be illuminated for your convenience, pro- vided the ignition switch is not in the "ON" position. The light will go off approximately 10 seconds after closing the door or when the ignition switch is turned on.

DOOR

B040A03Y-AAT Door Locks

WARNING:

o Unlocked doors can be dangerous. Be- fore you drive away (especially if there are children in the car), be sure that all the doors are securely closed and locked so that the doors cannot be inadvertently opened from the inside. This helps en- sure that the doors will not be opened accidentally. Also, when combined with the proper use of seat belts, locking the doors helps keep occupants from being ejected from the car in case of an acci- dent.

o Before opening the door, always look for

and avoid oncoming traffic.

o In case of accident, the door is unlocked

automatically (If installed).

o An enclosed vehicle can become ex- tremely hot, causing death or severe injury to unattended children or animals who cannot escape the vehicle. Further- more, children might operate features of the vehicle that could injure them, or they could encounter other harm, possi- bly from someone gaining entry to the vehicle. Never leave children or animals unattended in your vehicle.

B040B01GK-AAT Locking and unlocking front doors with a key

B040C01S-AAT Locking From the Outside

B040D01S-AAT Locking From the Inside

UNLOCK

LOCK

UNLOCK

LOCK

FEATURES OF YOUR HYUNDAI

OGK046002
o The door can be locked or unlocked with a

key.

o Lock the door by turning the key toward the front of the vehicle and unlock it by turning the key toward the rear.

NOTE: The driver's door can be unlocked by turn- ing the key once toward the rear. If you wish to unlock all doors, turn the key again toward the rear within 4 seconds.

OGK046003

The doors can be locked without a key. To lock the doors first push the inside lock switch to the "LOCK" position so that the red mark on the switch is not visible, then close the door.

NOTE: o When locking the door this way, be care- ful not to lock the door with the ignition key left in the vehicle.

o To reduce the chance of theft, always remove the ignition key, close all win- dows, and lock all doors when leaving your vehicle unattended.

OGK046004L To lock the doors from the inside, simply close the door and push the lock switch to the "LOCK" position. When this is done, neither the outside nor the inside door handle can be used.

NOTE: When the door is locked, the red mark on the switch is not visible.

1FEATURES OF YOUR HYUNDAI

B040G02GK-GAT Central Door Lock

o If the door is locked/unlocked multiple times in rapid succession with either the vehicle key or door lock switch, the sys- tem may stop operating temporarily in order to protect the circuit and prevent damage to system components.

OGK046003
The central door locking is operated by pushing the driver's door lock switch toward the front or rear of the vehicle. If the passenger door is open when the switch is pushed, the door will remain locked when closed.

NOTE: o When pushing the switch toward the

rear, all doors will unlock. When pushing the switch toward the front, all doors will lock.

o When the door is unlocked, the red mark

on the switch is visible.

o The central door locking is operated by turning the key (driver's door only) to- ward the front or rear of the vehicle.

THEFT-ALARM SYSTEM

B070A01A-AAT (If Installed)

This system is designed to provide protection from unauthorized entry into the car. This sys- tem is operated in three stages: the first is the "Armed" stage, the second is the "Alarm" stage, and the third is the "Disarmed" stage. If trig- gered, the system provides an audible alarm with blinking of the turn signal light.

B070B02GK-AAT Armed Stage

Park the car and stop the engine. Arm the system as described below.

1) Remove the ignition key from the ignition

switch.

2) Make sure that the engine hood and tail gate

are closed and latched.

3) Lock the doors using the transmitter of the

keyless entry system.

After completion of the steps above, the turn signal light will blink once to indicate that the system is armed.

NOTE: 1) If any door, tail gate or engine hood remains open, the system will not be armed.

2) If this happens, rearm the system as

described above.

3) Once the system is armed, only the tail gate may be unlocked using the key without disarming the system.

CAUTION:

Do not arm the system until all passengers have left the car. If the system is armed while a passenger(s) remains in the car, the alarm may be activated when the remaining passenger(s) leaves the car.

FEATURES OF YOUR HYUNDAI

B070C02GK-AAT Alarm Stage

B070D05GK-AAT Disarmed Stage

The alarm will be activated if any of the following occur while the car is parked and the system is armed.

1) A front door is unlocked and opened without

using the transmitter.

2) The tail gate is opened without using the key. 3) The engine hood is opened.

The siren will sound and the turn signal lamp will blink continuously for 27 seconds. (This hap- pens 3 times). To turn off the system, unlock the door with the transmitter.

CAUTION:

Avoid trying to start the engine while the system is armed.

UNLOCK

LOCK

OGK016102
The system will be disarmed when either of the following steps are taken:

1) The driver's or passenger's door is un- locked by depressing the "UNLOCK" button on the transmitter.

2) In the middle of alarming or after alarming, it keeps for 30 seconds when the key is turned to the "ON" position.

After completing one of the steps above, the turn signal light will blink twice to indicate that the system is disarmed.

NOTE: If any door, tail gate or engine hood is not opened within 30 seconds, the system will be rearmed.

1FEATURES OF YOUR HYUNDAI

B075E01O-AAT Panic Warning

PANIC

OGK016102
1. Push the "PANIC" button on the transmitter. 2. At the same time, the siren will sound and the turn signal lights will blink for 30 seconds. 3. To turn off the system, push the "PANIC"

button again on the transmitter.

B070F03A-AAT Keyless Entry System (If installed) NOTE: This device complies with Part 15 of the FCC rules. Operation is subject to the fol- lowing two conditions: (1) This device may not cause harmful in- terference, and (2) this device must accept any interference received, including inter- ference that may cause undesired opera- tion.

CAUTION:

Changes or modifications not expressly approved by the party responsible for com- pliance could void the user's authority to operate the equipment.

Locking doors

1. Close all doors. 2. Push the "LOCK" button on the transmitter. 3. At the same time all doors lock, the turn signal lights will blink once to indicate that the system is armed.

Unlocking doors

1. Push the "UNLOCK" button on the transmitter. 2. At the same time all doors unlock, the turn signal lights will blink twice to indicate that the system is disarmed.

NOTE: The transmitter will not work if any of fol- lowing occur: - The ignition key is in ignition switch. - You exceed the operating distance limit

(10 m).

- The battery in the transmitter is weak. - Other vehicles or objects may be block-

ing the signal.

- The weather is extremely cold. - The transmitter is close to a radio trans- mitter such as a radio station or an airport which can interfere with normal operation of the transmitter.

When the transmitter does not work cor- rectly, open and close the door with the ignition key. If you have a problem with the transmitter, contact an authorized Hyundai Dealer.

NOTE: Keep the transmitter away from water or any liquid. If the keyless entry system is inoperative due to exposure to water or liquids, it will not be covered by your manu- facturer vehicle warranty.

B070E02GK-GAT Replacing the battery

When the transmitter's battery begins to get weak, it may take several pushes on the button to lock or unlock the doors, and the LED will not light. Replace the battery as soon as possible.

Battery type : CR2016

Replacement instructions:

Battery

Screwdriver

OGK016122

1. Carefully separate the case with a blade

screwdriver as shown in the illustration.

OGK016121

2. Remove the old battery from the case and note the polarity. Make sure the polarity of the new battery is the same(+side facing up), then insert it in the transmitter.

NOTE: Install a new battery within 30 seconds after removing the old one. If installing a new battery takes more than 30 seconds, take the following steps.

1) Turn the ignition key to the "ACC" posi-

tion.

2) Make sure that the turn signal lamps blink once by pushing the "LOCK" or "UNLOCK" button on the transmitter.

FEATURES OF YOUR HYUNDAI

POWER WINDOW

B050A02GK-AAT

(1)

(2)

HGK2015
The power windows operate only when the ignition key is in the "ON" position. The main switches are located on the driver's arm rest and control the front windows on the respective sides of the vehicle. The windows may be opened by depressing the front portion of the switch. To stop at the desired opening, release the switch. The window may be closed by pulling the front portion of the switch. To open the window on the driver's side, press the switch(1) halfway down. The window moves as long as the switch is operated. To fully open the driver's window automatically, press the switch fully down. In automatic operation, the window will fully open even if you let go of the switch.

1FEATURES OF YOUR HYUNDAI 10

To stop at the desired opening, pull up and release the switch. In order to prevent operation of the passenger front window by the passen- ger, a window lock switch (2) is provided on the arm rest of the driver's door. To disable the passenger's power window, push the window lock switch. To revert to normal operation, push in on the window lock switch again.

NOTE: The power windows can be operated for 30
seconds after the ignition key is turned to the "ACC" or "LOCK" positions, or removed from the ignition switch. If the front doors are opened during this 30 second period, the power windows can no longer be oper- ated without the ignition key turned to the "ON" position.

SEATS

B080A02A-AAT Adjustable Front Seats

WARNING:

o Never adjust the driver’s seat while the vehicle is moving. Any sudden or unex- pected movement of the seat could cause you to lose control of the vehicle result- ing in an accident. Only adjust the driver’s seat when the vehicle is station- ary.

o Do not sit or lean unnecessarily close to the airbag. Position the seat so that you can sit as far back as possible from the airbag and still comfortably reach all controls.

HGK2016

WARNING:

o Passengers can be injured if their head, hands or other body parts are trapped by a closing window. Always check for obstructions before raising any window. o NEVER leave the ignition key in the ve-

hicle.

o NEVER leave any child unattended in the vehicle. Even very young children may inadvertently cause the vehicle to move, entangle themselves in the windows, or otherwise injure themselves or others. o Do not attempt to operate the main switch on the driver's door and a switch on another door in opposing directions at the same time. If this is done, the window will stop and cannot be opened or closed.

B080B04A-AAT Front Seat Adjusting Seat Forward and Rearward

WARNING:

After adjusting the seat, always check that it is securely locked into place by attempt- ing to move the seat forward or rearward without using the lock release lever. Sud- den or unexpected movement of the driver's seat could cause you to lose control of the vehicle resulting in an accident.

OGK036002

To move the seat toward the front or rear, pull the lock release lever upward. This will release the seat on its track so you can move it forward or rearward to the desired position. When you find the position you want, release the lever and slide the seat forward or rearward on its track until it locks into the desired position and cannot be moved further.

FEATURES OF YOUR HYUNDAI

11

B080C02A-AAT Adjusting Seatback Angle

OGK036003

To recline the seatback, lean forward to take your weight off it, then pull up on the recliner control lever at the outside edge of the seat. Now lean back until the desired seatback angle is achieved. To lock the seatback into position, release the recliner control lever.

1FEATURES OF YOUR HYUNDAI 12

WARNING:

Riding with a reclined seatback increases your chance of serious or fatal injuries in the event of a collision or sudden stop. The protection of your restraint system (seat belts and airbags) is greatly reduced by reclining your seat. Seat belts must be snug against your hips and chest to work prop- erly. The more the seatback is reclined, the greater the chance that an occupant's hips will slide under the lap belt or the occupant's neck will strike the shoulder belt. Drivers and passengers should always sit well back in their seats, properly belted, and with the seatbacks upright.

B080D02JM-AAT Adjustable Headrests

WARNING:

Lock Knob

HGK2032
Headrests are designed to help reduce the risk of neck injuries. To raise the headrest, pull it up. To lower the headrest, push it down while pressing the lock knob. To remove the headrest, raise it as far as it can go then press the lock knob while pulling upward. This should only be done when the seat is not occupied.

B080D01JM o For maximum effectiveness in case of an accident the headrest should be ad- justed so the middle of the headrest is at the same height as the top of the occupant's eyes. For this reason, the use of a cushion that holds the body away from the seatback is not recom- mended.

o Do not operate vehicle with the head- rests removed as injury to the occupants may occur in the event of an accident. Headrests may provide protection against neck injuries when properly adjusted.

o Do not adjust the headrest hejght while

the vehicle is in motion.

B080E01F-AAT Lumbar Support Control (Driver's seat only) (If Installed)

B080F01F-AAT Seat Cushion Height Adjustment (Driver's Seat Only) (If Installed)

B130A02GK-AAT Rear Seat Entry (Walk in device)

The driver and front passenger's seatbacks should be tilted to enter the rear seat.

FEATURES OF YOUR HYUNDAI

13

SOFT

FIRM

OGK036005
The driver's seat is equipped with adjustable lumbar support. To increase the amount of lumbar support, pull the lever forward. To decrease it, push the lever toward the rear.

OGK036004
To raise or lower the front part of the seat cushion, turn the knob forward or rearward.

OGK036007
By pulling up the walk in device lever (1) at the left-upper side of the driver side seatback, the seatback will tilt forward. Then pull the lock release lever (2) up to move the seat forward.

1FEATURES OF YOUR HYUNDAI 14

B129A01F-AAT Rear Seat Rear Seat Positions

B099A02GK-AAT Before Folding the Rear Seats

OGK036008

By pulling up the walk in device lever (1) at the right-upper side of the passenger side seatback, the seatback will tilt forward. Then push the seat forward to allow the occupants to enter.

Recliner Memory By pulling up the walk in device lever (1) the seatback is reclined and returned to the original position.

WARNING:

Don't drive with the passenger side seatback reclined. It is dangerous to move it while driving. Be sure the seatback is secured firmly before driving.

B129A01GK

HGK2034
In order to prevent the shoulder belt from being damaged while folding the rear seat, the shoul- der belt must be passed through the hanger to keep it out of the way.

WARNING:

This vehicle contains two rear seating po- sitions only and a seat belt for each seating position. Thus, never permit more than two occupants to ride in the rear seat because an unrestrained occupant could be seri- ously injured or killed in the event of a vehicle crash.

FEATURES OF YOUR HYUNDAI

15

WARNING:

The purpose of the fold-down rear seatbacks is to allow you to carry longer objects than could otherwise be accommo- dated. Never allow passengers to sit on top of the folded down seat back while the car is moving as this is not a proper seating position and no seat belts are available for use. This could result in injury in case of an accident or sudden stop. Objects carried on the folded down seatback should not extend higher than the top of the front seats. This could allow cargo to slide for- ward and cause injury or damage during sudden stops.

CAUTION:

o Seat belts must be removed from the

hanger when in use.

B110A02S-AAT Folding Rear Seatbacks

OGK016606

o Before folding the seatback, insert the buckle in the pocket. This can prevent the buckle from being damaged by the seatback.

HGK2035
The rear seatbacks may be folded to facilitate carrying long items or to increase the luggage capacity of the vehicle.

o To unlock the seatback, push the seatback locking button, then pull forward on the seatback panel.

o When you return the seatback to its upright position, always be sure it has locked into position by pulling and pushing on the top of the seatback.

1FEATURES OF YOUR HYUNDAI 16

B140A01S-AAT REAR SEAT WARNING

OGK016140
For the safety of all passengers, luggage or other cargo should not be piled higher than the top of the seatback. In addition, do not place objects on the rear shelf as they may move forward during braking or in an accident and strike vehicle passengers.

SEAT BELT

B150A02S-AAT Seat Belt Precautions

B150B04Y-AAT Infant or Small Child

WARNING:

All occupants of the vehicle must wear their seat belts at all times. Seat belts and child restraints reduce the risk of serious or fatal injuries for all occupants in the event of a collision or sudden stop. Without a seat belt, occupants could be shifted too close to a deploying airbag, strike the interior structure or be thrown from the vehicle. Properly worn seat belts greatly reduce these hazards. Even with advanced airbags, unbelted occupants can be severely in- jured by a deploying airbag. Always follow the precautions about seat belts, airbags and occupant safety contained in this manual.

All 50 states have child restraint laws. You should be aware of the specific requirements in your state. Child and/or infant safety seats must be properly placed and installed in the rear seat. Information about the use of these restraints begins on page 1-22.

WARNING:

Every person in your vehicle needs to be properly restrained at all times, including infants and children. Never hold a child in your arms or lap when riding in a vehicle. The violent forces created during a crash will tear the child from your arms and throw the child against the interior. Always use a child restraint appropriate for your child's height and weight, see page 1-21.

NOTE: Small children are best protected from in- jury in an accident when properly restrained in the rear seat by a child restraint system that meets the requirements of the Federal Motor Vehicle Safety Standards. Before buying any child restraint system, make sure that it has a label certifying that it meets Federal Motor Vehicle Safety Stan- dard 213. The restraint must be appropriate for your child's height and weight. Check the label on the child restraint for this information. See page 1-22.

B150C02A-AAT Larger Children

B150D01A-AAT Pregnant Women

FEATURES OF YOUR HYUNDAI

17

Children who are too large for child restraint systems should always occupy the rear seat and use the available lap/shoulder belts. The lap portion should be fastened snug on the hips and as low as possible. Check belt fit periodically. A child's squirming could put the belt out of posi- tion. Children are afforded the most safety in the event of an accident when they are restrained by a proper restraint system in the rear seat. If a larger child (over age 13) must be seated in the front seat, the child should be securely restrained by the available lap/shoulder belt and the seat should be placed in the rearmost position. Children under the age of 13 should be restrained securely in the rear seat. Never place a child under the age of 13 in the front seat. NEVER place a rear facing child seat in the front seat of a vehicle.

The use of a seat belt is recommended for pregnant women to lessen the chance of injury in an accident. When a seat belt is used, the lap belt portion should be placed as low and snugly as possible on the hips, not across the abdo- men. For specific recommendations, consult a physician.

B150E01A-AAT Injured Person

A seat belt should be used when an injured person is being transported. When this is nec- essary, you should consult a physician for recommendations.

B150F01A-AAT One Person Per Belt

Two people (including children) should never attempt to use a single seat belt. This could increase the severity of injuries in case of an accident.

1FEATURES OF YOUR HYUNDAI 18

B150G02A-AAT Do Not Lie Down

To reduce the chance of injuries in the event of an accident and to achieve maximum effective- ness of the restraint system, all passengers should be sitting up and the front seats should be in an upright position when the car is moving. A seat belt cannot provide proper protection if the person is lying down in the rear seat or if the front seat is in a reclined position.

WARNING:

Riding with a reclined seatback increases your chance of serious or fatal injuries in the event of a collision or sudden stop. The protection of your restraint system (seat belts and airbags) is greatly reduced by reclining your seat. Seat belts must be snug against your hips and chest to work prop- erly. The more the seatback is reclined, the greater the chance that an occupant's hips will slide under the lap belt causing serious internal injuries or the occupant's neck could strike the shoulder belt. Drivers and passengers should always sit well back in their seats, properly belted (see page 1-19), and with the seatbacks upright.

B160A02A-AAT Care of Seat Belts

B160B01A-AAT Periodic Inspection

Seat belt systems should never be disassembled or modified. In addition, care should be taken to assure that seat belts and belt hardware are not damaged by seat hinges, doors or other abuse.

It is recommended that all seat belts be in- spected periodically for wear or damage of any kind. Parts of the system that are damaged should be replaced as soon as possible.

WARNING:

When you return the rear seatback to its upright position after the rear seatback was folded down, be careful not to damage the seat belt webbing or buckle. Be sure that the webbing or buckle does not get caught or pinched in the rear seat. A seat belt with damaged webbing or buckle will not be as strong and could possibly fail during a collision or sudden stop, resulting in seri- ous injury.

B160C01A-AAT Keep Belts Clean and Dry

Seat belts should be kept clean and dry. If belts become dirty, they can be cleaned by using a mild soap solution and warm water. Bleach, dye, strong detergents or abrasives should not be used because they may damage and weaken the fabric.

B160D01A-AAT When to Replace Seat Belts

Entire in-use seat belt assembly or assemblies should be replaced if the vehicle has been involved in an accident. This should be done even if no damage is visible. Additional ques- tions concerning seat belt operation should be directed to your Hyundai Dealer.

B170A04A-AAT Height Adjustable Front Seat Shoulder Belt

Release the button to lock the anchor into position. Try sliding the height adjuster to make sure that it has locked into the position.

B180A01L-AAT SEAT BELT-Driver's 3-Point System with Emergency Locking Retractor: To Fasten Your Belt

FEATURES OF YOUR HYUNDAI

19

WARNING:

o Verify the shoulder belt anchor is locked into position at the appropriate height. Never position the shoulder belt across your neck or face. Improperly posi- tioned seat belts can cause serious inju- ries in an accident.

o Failure to replace seat belts after an accident could leave you with damaged seat belts that will not provide protec- tion in the event of another collision leading to personal injury or death. Replace your seat belts after being in an accident as soon as possible.

HGK2038
You can adjust the height of the shoulder belt anchor to one of the 4 positions for maximum comfort and safety. If the height of the adjusting seat belt is too near your neck, you will not be getting the most effective protection. The shoulder portion should be adjusted so that it lies across your chest and midway over your shoulder nearest the door and not your neck. To adjust the height of the seat belt anchor, lower or raise the height adjuster into an appro- priate position. To raise the height adjuster, pull it up. To lower it, push it down while pressing the height adjuster button.

B180A01NF

To fasten your seat belt, pull it out of the retractor and insert the metal tab into the buckle. There will be an audible "click" when the tab locks into the buckle. The seat belt automatically adjusts to the proper length only after the lap belt portion is adjusted manually so that it fits snugly around your hips. If you lean forward in a slow, easy motion, the belt will extend and let you move around. If there is a sudden stop or impact, however, the belt will lock into position. It will also lock if you try to lean forward too quickly. Check to make sure that the belt is properly locked and that the belt is not twisted.

1FEATURES OF YOUR HYUNDAI 20

NOTE: Seat belt reminder light comes and stays on until the seat belt is fastened when the ignition key is turned "ON" or "START". And, the warning chime will also sound for about 6 seconds.

NOTE: Although the combination retractor pro- vides the same level of protection for seated passengers in either emergency or auto- matic locking modes, it is recommended that seated passengers use the emergency locking feature for improved convenience. The automatic locking function is intended to facilitate child restraint installation. To convert from the automatic locking feature to the emergency locking operation mode, allow the unbuckled seat belt to fully re- tract.

B190A02Y-AAT SEAT BELTS -Front Passenger and Rear Seat 3-Point System with Combination Locking Retractor To Fasten Your Belt

Combination retractor type seat belts are in- stalled in the rear seat positions to help accom- modate the installation of child restraint sys- tems. Hyundai strongly recommends that chil- dren always be seated in the rear seat. NEVER place any infant restraint system in the front seat of the vehicle. This type of seat belt combines the features of both an emergency locking retractor seat belt and an automatic locking retractor seat belt. To fasten your seat belt, pull it out of the retractor and insert the metal tab into the buckle. There will be an audible "click" when the tab locks into the buckle. When not securing a child restraint, the seat belt operates in the same way as the driver's seat belt (Emergency Locking Retractor Type). It automatically adjusts to the proper length only after the lap belt portion of the seat belt is adjusted manually so that it fits snugly around your hips. When the seat belt is fully extended from the retractor to allow the installation of a child restraint system, the seat belt operation changes to allow the belt to retract, but not to extend. (Automatic Locking Retractor Type) see page 1-27.

!

WARNING:

o For maximum restraint system protec- tion, seat belts must always be used whenever the car is moving.

o Seat belts are most effective when

seatbacks are in the upright position.

o Children age 12 and younger must al- ways be properly restrained in the rear seat. Never allow children to ride in the front passenger seat. If a child over 13
must be seated in the front seat, he/she must be properly belted and the seat should be moved as far back as possible. o Never wear the shoulder belt under your arm or behind your back. An improperly positioned shoulder belt can cause se- rious injuries in a crash. The shoulder belt should be positioned midway over your shoulder across your collarbone. o Avoid wearing twisted seat belts. A twisted belt can't do its job as well. In a collision, it could even cut into you. Be sure the belt webbing is straight and not twisted.

o Be careful not to damage the belt web- bing or hardware. If the belt webbing or hardware is damaged, replace it.

B200A01A-AAT Adjusting Your Seat Belt

B210A01A-AAT To Release the Seat Belt

FEATURES OF YOUR HYUNDAI

21

B210A01NF The seat belt is released by pressing the re- lease button in the locking buckle. When it is released, the belt should automatically draw back into the retractor. If this does not happen, check the belt to be sure it is not twisted, then try again.

B200A01NF

WARNING:

You should place the lap belt portion as low as possible and snugly across your hips, not on your waist. If the lap belt is located too high on your waist, it may increase the chance of injury in the event of a collision. Both arms should not be under or over the belt. Rather, one should be over and the other under, as shown in the illustration. Never wear the seat belt under the arm nearest the door.

1FEATURES OF YOUR HYUNDAI 22

CHILD RESTRAINT SYSTEM

B230A03A-AAT Children riding in the car should sit in the rear seat and must always be properly restrained to minimize the risk of injury in an accident, sudden stop or sudden maneuver. According to acci- dent statistics provided by the National High- way Traffic Safety Administration (NHTSA), children are safer when properly restrained in the rear seats than in the front seat. Larger children not in a child restraint should use one of the seat belts provided. All 50 states have child restraint laws. You should be aware of the specific requirements in your state. Child and/or infant safety seats must be properly placed and installed in the rear seat. You must use a commercially available child restraint system that meets the requirements of the Federal Motor Vehicle Safety Standards (FMVSS). Children could be injured or killed in a crash if their restraints are not properly secured. For small children and babies, a child seat or infant seat must be used. Before buying a particular child restraint system, make sure it fits your car and seat belts, and fits your child. Follow all the instructions provided by the manufacturer when installing the child restraint system.

WARNING:

o A child restraint system must be placed in the rear seat. Never install a child or infant seat on the front passenger's seat. Should an accident occur and cause the passenger side airbag to deploy, it could severely injure or kill an infant or child seated in an infant or child seat. Thus only use a child restraint in the rear seat of your vehicle.

o A safety belt or child restraint system can become very hot if it is left in a closed vehicle on a sunny day, even if the out- side temperature does not feel hot. Be sure to check the seat cover and buckles before placing a child there.

o When the child restraint system is not in use, store it in the trunk or fasten it with a safety belt so that it will not be thrown forward in the case of a sudden stop or an accident.

o Children may be seriously injured or killed by an inflating airbag. All children, even those too large for child restraints, must ride in the rear seat.

WARNING:

To reduce the chance of serious or fatal injuries: o Children of all ages are safer when re- strained in the rear seat. A child riding in the front passenger seat can be force- fully struck by an inflating airbag result- ing in serious or fatal injuries.

o Always follow the instructions for in- stallation and use of the child restraint maker.

o Always make sure the child seat is se- cured properly in the car and your child is securely restrained in the child seat. o Never hold a child in your arms or lap when riding in a vehicle. The violent forces created during a crash will tear the child from your arms and throw the child against the car’s interior.

o Never put a seat belt over yourself and a child. During a crash, the belt could press deep into the child causing seri- ous internal injuries.

o Never leave children unattended in a vehicle – not even for a short time. The car can heat up very quickly, resulting in serious injuries to children inside. Even very young children may inadvertently cause the vehicle to move, entangle them- selves in the windows, or lock them- selves or others inside the vehicle.

!

WARNING:

o Never allow two children, or any two

persons, to use the same seat belt.

o Children often squirm and reposition themselves improperly. Never let a child ride with the shoulder belt under their arm or behind their back. Always prop- erly position and secure children in the rear seat.

o Never allow a child to stand-up or kneel on the seat or floorboard of a moving vehicle. During a collision or sudden stop, the child can be violently thrown against the vehicles interior, resulting in serious injury.

o Never use an infant carrier or a child safety seat that "hooks" over a seatback, it may not provide adequate security in an accident.

o Seat belts can become very hot, espe- cially when the car is parked in direct sunlight. Always check seat belt buck- les before fastening them over a child. o Always store or secure a child seat, even when it is not in use. During a collision or sudden stop, the child seat could be thrown inside the vehicle.

FEATURES OF YOUR HYUNDAI

23

B230B02GK-GAT Using a Child Restraint System For small children and babies, the use of a child seat or infant seat is required. This child seat or infant seat should be of appropriate size for the child and should be installed in accordance with the manufacturer's instructions. It is further required that the seat be placed in the vehicle's rear seat since this can make an important contribution to safety. Your vehicle is provided with two child restraint hook holders for insta lling the child seat or infant seat.

B230C06F-AAT Installing a Child Restraint Seat with the "Tether Anchorage" System

Two child restraint hook holders are located on the luggage compartment floor.

To install the child restraint seat

Tether Anchor Cover

Child Restraint Hook Holder

OGK016230

1. Open the tether anchor cover on the rear

luggage compartment floor.

2. Route the child restraint seat strap over the

seatback. For vehicles with adjustable headrests, route the tether strap under the headrest and between the headrest posts, otherwise route the tether strap over the top of the seatback.

1FEATURES OF YOUR HYUNDAI 24

Rear luggage compartment floor

Blanking covers

To install the child restraint seat: For mania pack

Covering shelf

Child Restraint Hook Holders

Tether strap hook

Front of Vehicle

B230E01GK 3. Remove the blanking covers on the cover-

ing shelf.

4. Connect the tether strap hook to the child restraint hook holder through the hole on the covering shelf and tighten to secure the seat.

OGK016900L 1. Remove the front board on the luggage

copartment floor.

2. Route the child restraint seat strap over the

seatback. For vehicles with adjustable headrests, route the tether strap under the headrest and between the headrest posts, otherwise route the tether strap over the top of the seatback. 3. Remove the blanking covers on the cover-

ing shelf.

4. Connect the tether strap hook to the child restraint hook holder through the hole on the covering shelf and tighten to secure the seat.

WARNING:

o A child can be seriously injured or killed in a collision if the child restraint is not properly anchored. Always follow the child seat manufacturer’s instructions for installation and use.

o Never mount more than one child re- straint to a single tether or to a single lower anchorage point. The increased load caused by multiple seats may cause the tethers or anchorage points to break, causing serious injury or death.

FEATURES OF YOUR HYUNDAI

25

o When using the vehicle’s “ISOFIX” sys- tem to install a child restraint system in the rear seat, all unused vehicle rear seat belt metal latch plates or tabs must be latched securely in their seat belt buck- les and the seat belt webbing must be retracted behind the child restraint to prevent the child from reaching and tak- ing hold of unretracted seat belts. Unlatched metal latch plates or tabs may allow the child to reach the unretracted seat belts which may result in strangu- lation and a serious injury or death to the child in the child restraint.

B230D05GK-AAT Securing the child restraint seat with the "ISOFIX" system

B230F01GK

Some child seat manufacturers make child restraint seats that are labeled as ISOFIX or ISOFIX-compatible child restraint seats. These seats include two rigid or webbing mounted attachments that connect to two ISOFIX an- chors at specific seating positions in your ve- hicle. This type of child restraint seat eliminates the need to use seat belts to attach the child seat. ISOFIX anchors have been provided in your vehicle. The ISOFIX anchors are located in the left and right outboard rear seating positions. Their locations are shown in the illustration.

WARNING:

o There is no center rear seat position. o A child can be seriously injured or killed in a collision if the child restraint is not properly anchored. Always follow the child seat manufacturer’s instructions for installation and use.

o Never install a child restraint using the ISOFIX anchors at the center position of the rear seat. In a crash, the ISOFIX anchors may break if a car seat is improp- erly placed in the center position result- ing in serious or fatal injuries. Only place a ISOFIX or ISOFIX-compatible child seat in the left or right out-board rear seating positions (as shown) to the appropriate ISOFIX anchors provided.

o Never mount more than one child re- straint to a single tether or to a single lower anchorage point. The increased load caused by multiple seats may cause the tethers or anchorage points to break, causing serious injury or death.

1FEATURES OF YOUR HYUNDAI 26

ISOFIX Anchor

ISOFIX Anchor Position Indicator

B230D02GK The ISOFIX anchors are located between the seatback and the seat cushion of the rear seat left and right outboard seating positions.

HGK261

Follow the child seat manufacturer's instruc- tions to properly install child restraint seats with ISOFIX or ISOFIX-compatible attachments.

Once you have installed the ISOFIX child re- straint, assure that the seat is properly attached to the ISOFIX and tether anchors. Also, test the child restraint seat before you place the child in it. Tilt the seat from side to side. Also try to tug the seat forward. Check to see if the anchors hold the seat in place.

CAUTION:

Do not allow the rear seat belt webbing to get scratched or pinched by the ISOFIX- seat latch and ISOFIX anchor during the installation.

WARNING:

A child can be seriously injured or killed in a collision if the child restraint is not prop- erly anchored to the car and the child is not properly restrained in the child restraint. Always follow the child seat manufacturer’s instructions for installation and use.

FEATURES OF YOUR HYUNDAI

27

! WARNING:

o If the retractor is not in the Automatic Locking mode, the child restraint can move when your vehicle turns or stops suddenly. A child can be seriously in- jured or killed if the child restraint is not properly anchored to the car, including setting the retractor to the Automatic Locking mode.

o Do not install any child restraint system in the front passenger seat. Should an accident occur and cause the passenger side airbag to deploy, it could severely injure or kill an infant or child seated in an infant or child seat. Therefore, only use a child restraint system in the rear seat of your vehicle.

If the retractor is in the automatic locking mode, the belt will be locked. After installation of the child restraint system, try to move it in all directions to be sure the child restraint system is securely installed. If you need to tighten the belt, pull more webbing toward the retractor. When you unbuckle the seat belt and allow it to retract, the retractor will automatically revert back to its normal seated passenger emer- gency locking usage condition.

NOTE: o Before installing the child restraint sys- tem in any seating position, read the instructions supplied by the child re- straint system manufacturer.

o If the seat belt does not operate as de- scribed, have the system checked imme- diately by your authorized Hyundai dealer.

B230G02O-AAT Child Restraint System Installation on outboard Rear Seats On outboard rear seats

HGK1010
To install a child restraint system in the outboard rear seats, extend the shoulder/lap belt entirely from its retractor until a "click" is felt. This will engage the seat belt retractor automatic locking feature, which allows the seat belt to retract but not extend. Install the child restraint system, buckle the seat belt and allow the seat belt to take up any slack. Make sure that the lap portion of the belt is tight around the child restraint system and the shoulder portion of the belt is positioned so that it can not interfere with the child's head or neck. Also, double check to be sure that the retractor has engaged the auto- matic locking feature by trying to extend web- bing out of the retractor.

1FEATURES OF YOUR HYUNDAI 28

B180B05GK-AAT Pre-tensioner Seat Belt (If Installed)

Your Hyundai vehicle is equipped with driver's and front passenger's pre-tensioner seat belts. The purpose of the pre-tensioner is to make sure that the seat belts fit tightly against the occupant's body in certain frontal collisions. The pre-tensioner seat belts can be activated alone or, where the frontal collision is severe enough, together with the airbags.

OMG035300

When the vehicle stops suddenly, or if the occupant tries to lean forward too quickly, the seat belt retractor will lock into position. In certain frontal collisions, the pre-tensioner will activate and pull the seat belt into tighter contact against the occupant's body.

Driver's airbag

Passenger's airbag

WARNING:

To obtain maximum benefit from a pre- tensioner seat belt:

o The seatbelt must be worn correctly and adjusted to the proper position (see pages beginning on 1-18). Please read and follow all of the important informa- tion and precautions about your vehicle’s occupant safety features – including seat belts – that are provided in this manual.

o Be sure you and your passengers always wear seat belts and wear them properly.

B180B01GK The seat belt pre-tensioner system consists mainly of the following components.

Their locations are shown in the illustration.

1. SRS airbag warning light 2. Seat belt pre-tensioner assembly 3. SRS control module

NOTE: o Both the driver's and front passenger's pre-tensioner seat belts will be activated in certain frontal collisions. The pre- tensioner seat belts can be activated alone or, where the frontal collision is severe enough, together with the airbags.

o When the pre-tensioner seat belts are activated, a loud noise may be heard and fine dust, which may appear to be smoke, may be visible in the passenger com- partment. These are normal operating conditions and are not hazardous.

o Although it is harmless, the fine dust may cause skin irritation and should not be breathed for prolonged periods. Wash all exposed skin areas thoroughly after an accident in which the pre-tensioner seat belts were activated.

CAUTION:

AIR BAG

o The sensor that activates the SRS airbag is connected with the pre-tensioner seat belts. The SRS airbag warning light on the instrument panel will illuminate for approximately 6 seconds after the igni- tion key has been turned to the "ON" position, and then it should turn off.

o If the pre-tensioner seat belt is not work- ing properly, this warning light will illu- minate even if there is no malfunction of the SRS airbag system. If the SRS airbag warning light does not illuminate when the ignition key is turned to "ON" or if it remains illuminated after approximately 6 seconds, or if it illuminates while the vehicle is being driven, please have an authorized Hyundai dealer inspect the pre-tensioner seat belts and SRS airbag system as soon as possible.

FEATURES OF YOUR HYUNDAI

29

WARNING:

o Pre-tensioners are designed to operate only one time. After activation, pre- tensioner seat belts must be replaced. All seat belts, of any type, should always be replaced after they have been worn during a collision.

o The pre-tensioner seat belt assembly mechanisms become hot during activa- tion. Do not touch the pre-tensioner seat belt assemblies for several minutes after they have been activated.

o Do not attempt to inspect or replace the pre-tensioner seat belts yourself. This must be done by an authorized Hyundai dealer.

o Do not strike the pre-tensioner seat belt

assemblies.

o Do not attempt to service or repair the pre-tensioner seat belt system in any manner.

o Improper handling of the pre-tensioner seat belt assemblies, and failure to heed the warnings to not strike, modify, in- spect, replace, service or repair the pre- tensioner seat belt assemblies may lead to improper operation or inadvertent activation and serious injury.

o Always wear seat belts when driving or

riding in a motor vehicle.

1FEATURES OF YOUR HYUNDAI 30

SUPPLEMENTAL RESTRAINT (AIRBAG) SYSTEM

B240D01GK-GAT (If Installed)

1. Driver's front airbag 2. Passenger's front airbag 3. Front side impact airbag

OGK036022

FEATURES OF YOUR HYUNDAI

31

According to the impact severity, seating posi- tion and seat belt usage, the SRSCM(SRS Control Module) controls the airbag inflation. Failure to properly wear seat belts can increase the risk or severity of injury in an accident.

Additionally, your Hyundai is equipped with an occupant classification system in the front passenger's seat. The occupant classification system detects the presence of a passenger in the front passenger's seat and will turn off the front passenger's airbag under certain condi- tions. For more detail, see "Occupant Classifi- cation System" later in this section.

B240A03GK-AAT Driver's and Passenger's Front Airbag Driver's Front Airbag

OGK016240
Your Hyundai is equipped with an advanced Supplemental Restraint (Airbag) System. The indications of the system's presence are the letters "SRS AIRBAG" embossed on the airbag pad cover in the steering wheel and the passenger's side front panel pad above the glove box.

The Hyundai SRS consists of airbags installed under the pad covers in the center of the steering wheel and the passenger's side front panel above the glove box.

The purpose of the SRS is to provide the vehicle's driver and/or the front passenger with additional protection than that offered by the seat belt system alone in case of a frontal impact of sufficient severity. The SRS uses sensors to gather information about the driver's seat posi- tion, the driver's and front passenger's seat belt usage and impact severity.

The driver's seat track position sensors, which are installed on the seat track, determine if the seats are fore or aft of a reference position. The seat belt buckle sensors determine if the driver and front passenger's seat belts are fastened. These sensors provide the ability to control the SRS deployment based on how close the driver's seat is to the steering wheel, whether or not the seat belts are fastened, and how severe the impact is.

The advanced SRS offers the ability to control the airbag inflation with two levels. A first stage level is provided for moderate-severity impacts. A second stage level is provided for more severe impacts.

1FEATURES OF YOUR HYUNDAI 32

CAUTION:

AIR BAG

If a seat track position sensor or an occu- pant classification system is not working properly, the SRS airbag warning light on the instrument panel will illuminate be- cause the SRS airbag warning light is con- nected with the seat track position sensor and the occupant classification system. If the SRS airbag warning light does not illu- minate when the ignition key is turned to the "ON" position, remains illuminated af- ter approximately 6 seconds when the igni- tion key is turned to the "ON" position, or if it illuminates while the vehicle is being driven, have an authorized Hyundai dealer inspect the advanced SRS airbag system as soon as possible.

WARNING:

o Modification to the seat structure can adversely affect the seat track position sensor and cause the airbag to deploy at a different level than should be pro- vided.

o Do not place any objects underneath the front seats as they could damage the seat track position sensor or interfere with the occupant classification sys- tem.

o Do not place any objects that may cause magnetic fields near the front seat. These may cause a malfunction of the seat track position sensor.

NOTE: o Be sure to read information about the SRS on the labels provided on the topside of the sun visor.

o Advanced airbags are combined with pre-tensioner seat belts to help provide enhanced occupant protection in fron- tal crashes. Front airbags are not in- tended to deploy in collisions in which sufficient protection can be provided by the pre-tensioner seat belt.

o If you are considering modification of your vehicle due to a disability, please contact the Hyundai Customer Assis- tance Center at 1-800-633-5151.

FEATURES OF YOUR HYUNDAI

33

! WARNING:

o Do not tamper or disconnect SRS wiring or other components. Injuries could result from inadvertent deployment or failure of the airbag to deploy in a crash. o If the SRS airbag warning light (see page 1-49) remains illuminated while the ve- hicle is being driven, have an authorized Hyundai dealer inspect the airbag sys- tem as soon as possible.

o Airbags can only be used once – have an authorized Hyundai dealer replace the airbag immediately after deployment.

o The SRS is designed to deploy the front airbags only when an impact is suffi- ciently severe and when the impact angle is within a range as measured from the forward longitudinal axis of the vehicle. The front airbags will not deploy in side, rear or rollover impacts. Additionally, the airbags will only deploy once. Seat belts must be worn at all times.

! WARNING:

o Move your seat as far back as practical from the front airbags, while still main- taining control of the vehicle.

o Never sit or lean unnecessarily close to

the front or side airbags.

o Never lean against the door or center console – always sit in an upright posi- tion.

o Do not allow an adult passenger to ride in the front seat when the “Passenger Airbag OFF” indicator is illuminated, because the airbag will not deploy in the event of a moderate or severe frontal crash.

o Never place objects over or near any airbag module (front or side impact airbags), because these objects can in- jure passengers in a crash.

o Never place covers, blankets or after- market seat warmers on the passenger seat as these may interfere with the occupant classification system.

WARNING:

Always use seat belts and child restraints – every trip, every time, everyone! Airbags inflate with considerable force and in the blink of an eye. Seat belts help keep occu- pants in proper position to obtain maxi- mum benefit from the airbag. Even with advanced airbags, improperly and unbelted occupants can be severely injured when the airbag inflates. Always follow the pre- cautions about seat belts, airbags and oc- cupant safety contained in this manual.

To reduce the chance of serious or fatal injuries and receive the maximum safety benefit from your restraint system: o Never place a child in any child or booster seat in the front seat (see child restraints 1-31).

o ABC – Always Buckle Children in the back seat. It is the safest place for children of any age to ride.

o Front and side impact airbags can injure occupants improperly positioned in the front seats.

1FEATURES OF YOUR HYUNDAI 34

! WARNING:

o Front airbags are not intended to deploy in side-impact, rear-impact or rollover crashes. In addition, front airbags will not deploy in frontal crashes below the deployment threshold.

Rear impact

Side Impact

Rollover

B240A02GK

o Move your seat as far back as practical from the front airbags, while still main- taining control of the vehicle. You and your passengers should never sit or lean unnecessarily close to the airbags. Im- properly positioned drivers and passen- gers can be severely injured by inflating airbags.

WARNING:

o No objects should be placed over or near the airbag modules on the steering wheel, instrument panel, and the front passenger's panel above the glove box, because any such object could cause harm if the vehicle is in a crash severe enough to cause the airbags to deploy. o If the airbags deploy, they must be re- placed by an authorized Hyundai dealer. Deployed airbags WILL NOT inflate again and will provide no protection in subse- quent collisions.

o Do not tamper with or disconnect SRS wiring or other components of the SRS system. Doing so could result in injury, due to accidental deployment of the airbags or by rendering the SRS inopera- tive.

o Even though your vehicle is equipped with the occupant classification sys- tem, do not install a child restraint sys- tem in the front passenger seat position. A child restraint system must never be placed in the front seat. The infant or child could be severely injured or killed by an airbag deploy- ment in case of an accident.

WARNING:

o Children younger than 13 years must always be properly restrained in the rear seat. Never allow children to ride in the front passenger seat. If a child over 13
must be seated in the front seat, he or she must be properly belted and the seat should be moved as far back as possible. o For maximum safety protection in all types of crashes, all occupants includ- ing the driver should always wear their seat belts whether or not an airbag is also provided at their seating position to minimize the risk of severe injury or death in the event of a crash. Do not sit or lean unnecessarily close to the airbag while the vehicle is in motion.

o Sitting improperly or out of position can result in serious or fatal injury in a crash. All occupants should sit upright with the seat back in an upright position, centered on the seat cushion with their seat belt on, legs comfortably extended and their feet on the floor until the ve- hicle is parked and the ignition key is removed.

!

WARNING:

o The SRS airbag system must deploy very rapidly to provide protection in a crash. If an occupant is out of position because of not wearing a seat belt, the airbag may forcefully contact the occupant causing serious or fatal injuries.

B240B04GK-AAT SRS Components and Functions

12. Side Impact Airbag Module (If Installed) 13. Front Impact Sensor

FEATURES OF YOUR HYUNDAI

35

The SRSCM continually monitors all elements while the ignition is "ON" to determine if a frontal or near-frontal impact is severe enough to require airbag deployment or pre-tensioner seat belt deployment.

The SRS "AIRBAG" warning light on the instru- ment panel will illuminate for about 6 seconds after the ignition key is turned to the "ON" position or after the engine is started, after which the "AIRBAG" warning light should go out.

B240B01L

OGK0168003N The SRS consists of the following components:

1. "PASSENGER AIR BAG OFF" Indicator

(Front passenger's seat only) 2. SRS "AIRBAG" warning light 3. Knee Bolster 4. Passenger's Airbag Module 5. Driver's Airbag Module 6. SRS Control Module (SRSCM) 7. Occupant Classification System

(Front passenger's seat only)

8. Driver's Seat Track Position Sensors 9. Driver's and Front Passenger's Seat Belt

Buckle Sensors

10. Side Impact Sensor (If Installed) 11. Retractor Pre-tensioner Assemblies

1FEATURES OF YOUR HYUNDAI 36

The airbag modules are located both in the center of the steering wheel and in the front passenger's panel above the glove box. When the SRSCM detects a sufficiently severe impact to the front of the vehicle, it will automatically deploy the front airbags.

B240B03L A fully inflated airbag, in combination with a properly worn seat belt, slows the driver's or the passenger's forward motion, reducing the risk of head and chest injury.

After complete inflation, the airbag immediately starts deflating, enabling the driver to maintain forward visibility and the ability to steer or operate other controls.

B240B02L

Upon deployment, tear seams molded directly into the pad covers will separate under pres- sure from the expansion of the airbags. Further opening of the covers then allows full inflation of the airbags.

Passanger's Airbag

OGK016241

CAUTION:

Do not install or place any accessories (drink holder, cassette holder, sticker, etc) on the front passenger's panel above the glove box in a vehicle with a passenger's air bag. Such objects may become dangerous projectiles and cause injury if the passenger's air bag inflates.

!

CAUTION:

When installing a container of liquid air freshener inside a vehicle, do not place it near the instrument cluster nor on the in- strument panel pad surface. If there is any leakage from the air freshener onto these areas (instrument cluster, instrument panel pad or air ventilator), it may damage these parts. If the liquid from the air freshener does leak onto these areas, wash them with water immediately.

Passenger's Airbag

B240B05L

WARNING:

o If an airbag deploys, there may be a loud noise followed by a fine dust released in the vehicle. These conditions are nor- mal and are not hazardous - the airbags are packed in this fine powder. The dust generated during airbag deployment may cause skin or eye irritation as well as aggravate asthma for some persons. Always wash all exposed skin areas thor- oughly with lukewarm water and a mild soap after an accident in which the airbags were deployed.

o The SRS can function only when the ignition key is in the "ON" position. If the SRS "AIRBAG" warning light does not illuminute, or continuously remains on after illuminating for about 6 seconds when the ignition key is turned to the "ON" position, or after the engine is started, illuminates while driving, the SRS is not working properly. If this oc- curs, have your vehicle immediately in- spected by your Hyundai dealer.

o Before you replace a fuse or disconnect a battery terminal, turn the ignition key to the "LOCK" position or remove the ignition key. Never remove or replace the air bag related fuse(s) when the ignition key is in the "ON" position. Failure to heed this warning will cause the SRS "AIRBAG" warning light to illuminate.

FEATURES OF YOUR HYUNDAI

37

B990A01GK-AAT Occupant Classification System

OGK036023N Your vehicle is equipped with an occupant