WARNING
Do not use a cellular phone while driving. Stop at a safe location to use a cellular phone.
Care of disc (cid:129) If the temperature inside the car is too high, open the car windows for ventilation before using your car audio.
(cid:129) It is illegal to copy and use MP3/WMA files without permission. Use CDs that are created only by lawful means.
(cid:129) Do not apply volatile agents such as benzene and thinner, normal cleaners and magnetic sprays made for ana- logue disc onto CDs.
(cid:129) To prevent the disc surface from get- ting damaged. Hold and carry CDs by the edges or the edges of the center hole only.
(cid:129) Clean the disc surface with a piece of soft cloth before playback (wipe it from the center to the outside edge).
(cid:129) Do not damage the disc surface or attach pieces of sticky tape or paper onto it.
(cid:129) Make sure on undesirable matter other than CDs are inserted into the CD player (Do not insert more than one CD at a time).
Features of your vehicle
(cid:129) Keep CDs in their cases after use to
protect them from scratches or dirt.
(cid:129) Depending on the type of CD-R/CD- RW CDs, certain CDs may not operate normally according to manufacturing companies or making and recording methods. In such circumstances, if you still continue to use those CDs, they may cause the malfunction of your car audio system.
✽✽ NOTICE - Playing an
Incompatible Copy Protected Audio CD Some copy protected CDs, which do not comply with the international audio CD standards (Red Book), may not play on your car audio. Please note that if you try to play copy protected CDs and the CD player does not perform correctly the CDs maybe defective, not the CD player.
4 103
Features of your vehicle
â– â– CD Player : PA710MD
â‹There will be no
logo if the Bluetooth® feature is not supported.
MD_USA_RADIO
104
SEEK
2. (cid:129) When the
Button TRACK
is pressed, it will automatically tune to the next lower station.
(cid:129) When the
is pressed, it will automatically tune to the next higher station.
SEEK
3. PRESET Buttons (cid:129) Press
(cid:129) Press
buttons less than 0.8 seconds to play the station saved in each button.
buttons more than 0.8 seconds or longer to save the cur- rent station to the respective button with a beep.
Using RADIO, SETUP, VOLUME and AUDIO CONTROL
MD_USA_RADIO
FM/AM
Button
1. The FM/AM button toggles between FM and AM. Listed below are the paths as the system switches from FM to AM and back to FM. (cid:129) FM/AM : FM1➟FM2➟AM➟FM1...
Features of your vehicle
MD_USA_RADIO
Button
DISP
4. Turn ON/OFF when
the LCD Display & Backlight
DISP
button press.
SCAN
Button
5. (cid:129) When the button is pressed, it auto- matically scans the radio stations upwards.
(cid:129) The SCAN feature steps through each station, starting from the initial station, for 5 seconds.
SCAN
(cid:129) Press the
button again to stop the scan feature and to listen to the currently selected channel.
4 105
Features of your vehicle
(cid:129) MAIN Select this item to enter the Scroll and SDVC setup.
SDVC (Speed Dependent Volume Control) Select this item to turn the SDVC feature On or Off. If it is turned ON, volume level is adjusted automatically according to the vehicle speed.
MD_USA_RADIO
SCROLL Select whether long file names are scrolled continuously (On) or just once (Off).
(cid:129) MEDIA Select default display of MP3 play infor- mation. “Folder/File†or “Artist/Title†can be selected.
6. Knob (cid:129) Turns the audio system on/off when
Button &
VOL
the ignition switch is on ACC or ON.
(cid:129) If the knob is turned clockwise/counter- clockwise, the volume will increase /decrease.
SETUP
Button
7. Press this button to enter SETUP mode, If no action is taken for 8 seconds, it will return to previous mode.
In “SETUP†mode, rotate the knob to move the cursor between items, and push the
button to select.
ENTER
VOL
106
(cid:129) XM Select default display of XM mode. “Cat./Ch.†or “Artist/Title†can be selected.
(cid:129) P.BASS (PowerBass) This function creates virtual sound effects and allows adjustments to the Bass level. Off ➟ Low ➟ Mid ➟ High ➟ Off... ∠AM Mode is not supported.
(cid:129) PHONE Select this item to enter BLUETOOTH setup mode. Refer to “BLUETOOTH PHONE OPERATION†for detailed information.
section
(cid:129) AUDIO Select the item to change the BASS, MIDDLE, TREBLE, FADER and BAL- ANCE tune mode. Press the ENTER button to select each mode and rotate the knob clockwise or counter- VOL clockwise.
BASS Control To increase the BASS, rotate the knob clockwise, while to decrease the BASS, rotate the knob counterclockwise.
Features of your vehicle
MIDDLE Control To increase the MIDDLE, rotate the knob clockwise, while to decrease the MID- DLE, rotate the knob counterclockwise.
TREBLE Control To increase the TREBLE, rotate the knob clockwise, while to decrease the TRE- BLE, rotate the knob counterclockwise.
FADER Control Turn the control knob clockwise to empha- size rear speaker sound (front speaker sound will be attenuated). When the con- trol knob is turned counterclockwise, front speaker sound will be emphasized (rear speaker sound will be attenuated).
BALANCE Control Rotate the knob clockwise to emphasize right speaker sound (left speaker sound will be attenuated). When the control knob is turned counter clockwise, left speaker sound will be emphasized (right speaker sound will be attenuated).
4 107
Features of your vehicle
Using CD Player
MD_USA_CD
CD/AUX
Button (CD)
1. If the CD is loaded, turns to CD mode. If no CD, it displays “No Media†for 3 sec- onds and returns to the previous mode.
Button (RANDOM)
2. Press this button for less than 0.8 sec- onds to activate ‘RDM’ mode and more than 0.8 seconds to activate ‘ALL RDM’ mode. (cid:129) RDM : Only files/tracks in a folder/disc are played back in a random sequence. (cid:129) ALL RDM (MP3/WMA Only) : All files in a disc are played back in the random sequence.
108
Button (REPEAT)
3.
Press this button for less than 0.8 seconds
to activate 'RPT' mode and more than 0.8
seconds to activate 'FLD RPT' mode.
(cid:129) RPT : Only a track (file) is repeatedly
played back.
(cid:129) FLD RPT (MP3/WMA Only) : Only files in a folder are repeatedly played back.
TRACK
4. (cid:129) Press
Button
TRACK
button for less than 0.8
seconds to play from the beginning of
current song.
TRACK
button for less than 0.8 seconds and press again within 1 second to play the previous song.
(cid:129) Press
(cid:129) Press
TRACK
button for 0.8 seconds or longer to initiate reverse direction high speed sound search of current song.
(cid:129) Press
SEEK
button for less than 0.8
seconds to play the next song.
(cid:129) Press
SEEK
button for 0.8 seconds or longer to initiate forward direction high speed sound search of current song.
CAUTION
Do not insert a CD if CD indicator is lit.
5. CD Eject Button (cid:129) Press
button to eject the CD. This button works regardless of ignition switch status.
6. CD Slot Insert a CD label side up and gently push in while ignition switch is on ACC or ON. The audio automatically switches to CD mode and begins to play the CD. If the audio was turned off, audio power will automatically turned on as the CD is inserted. (cid:129) This audio only recognizes 12cm-size, CD-DA (Audio CD) or ISO data-CD (MP3 CD).
(cid:129) If UDF data-CD or non-CD (e.g. DVD) is inserted, "Reading Error" message will be displayed and the disc will be ejected.
FLDR
9. (cid:129) Press
Button (FOLDER)
CAT
button to move to child folder of the current folder and display the first song in the folder. buttons to move Press to the folder displayed. It will play the first song in the folder.
FLDR
CAT
(cid:129) Press
FLDR
button to move to parent folder of the current folder and display the first song in the folder. Press to the folder displayed.
buttons to move
FLDR
CAT
MD_USA_CD
SCAN
Button
7. Play each song in the CD for 10 seconds. To cancel SCAN Play, press this button again.
INFO
Button
8. Displays the information of the current song. (cid:129) Audio CD : Disc Title/Artist, Track Title
/Artist, Total Track.
(cid:129) MP3 CD : File Name, Title, Artist, Album, Folder, Total Files (Not dis- played if the information is unavailable on the CD or file.)
Features of your vehicle
MD_USA_CD
TUNE
10. Search Button Press the button to display the songs next to the currently played song. press the button to display the songs before to the currently played song.
FILE
ENTER
11. Press the select song.
Button ENTER
button to play the
4 109
Features of your vehicle
NOTE: Order of playing files (folders) : 1. Song playing order :
to
sequen-
tially.
2. Folder playing order : â‹ If no song file is contained in the
folder, that folder is not displayed.
110
CAUTION IN USING USB DEVICE
(cid:129) To use an external USB device, make sure the device is not con- nected when starting up the vehi- cle. Connect the device after starting up.
(cid:129) If you start the engine when the USB device is connected, it may damage the USB device. (USB flashdrives are very sensitive to electric shock.)
(cid:129) If the engine is started up or turned off while the external USB device is connected,the external USB device may not work.
(cid:129) It may not play inauthentic MP3 or
WMA files. 1) It can only play MP3 files with the compression rate between 8Kbps~320Kbps.
2) It can only play WMA music files with the compression rate between 8Kbps~320Kbps.
(cid:129) Take precautions for static electrici- ty when connecting or disconnect- ing the external USB device.
(Continued)
(Continued) (cid:129) An encrypted MP3 PLAYER is not
recognizable.
(cid:129) Depending on the condition of the external USB device,the con- nected external USB device can be unrecognizable.
(cid:129) When the formatted byte/sector setting of External USB device is not either 512BYTE or 2048BYTE, then the device will not be recog- nized.
(cid:129) Use only a USB device formatted
to FAT 12/16/32.
(cid:129) USB devices without USB I/F authentication may not be recog- nizable.
(cid:129) Make sure the USB connection terminal does not come in contact with the human body or other objects.
(cid:129) If you repeatedly connect or dis- connect the USB device in a short period of time, it may break the device.
(cid:129) You may hear a strange noise when connecting or disconnect- ing a USB device.
(Continued)
Features of your vehicle
(Continued) (cid:129) If you disconnect the external USB device during playback in USB mode,the external USB device can be damaged or may malfunction. Therefore,disconnect the external USB device when the audio is turned off or in another mode.(e.g, Radio,XM or CD)
(cid:129) Depending on the type and capac- ity of the external USB device or the type of the files stored in the device,there is a difference in the time taken for recognition of the device.
(cid:129) Do not use the USB device for pur- poses other than playing music files.
(cid:129) Use of USB accessories such as rechargers or heaters using USB I/F may lower performance or cause trouble.
(cid:129) If you use devices such as a USB hub purchased separately, the vehicle’s audio system may not recognize the USB device.In that case, connect the USB device directly to the multimedia termi- nal of the vehicle.
(Continued)
4 111
(Continued) (cid:129) Please avoid using USB memory products which can be used as key chains or cellular phone accessories as they could cause damage to the USB jack. Please make certain only to use plug type connector products as shown below.
Features of your vehicle
(Continued) (cid:129) If the USB device is divided by logical drives,only the music files on the highest-priority drive are recognized by car audio.
(cid:129) Devices such as MP3 Player/ Cellular phone/Digital camera can be unrecognizable by standard USB I/F can be unrecognizable.
(cid:129) Some non-standard USB devices
(METAL COVER TYPE USB) can be unrecognizable.
(cid:129) Some USB flash memory readers (such as CF,SD,microSD,etc.) or external-HDD type devices can be unrecognizable.
(cid:129) Music files protected by DRM (DIGITAL RIGHTS MANAGEMENT) are not recognizable.
(cid:129) The data in the USB memory may be lost while using this audio. Always back up important data on a personal storage device.
(Continued)
112
Features of your vehicle
3. (cid:129) Press this button for less than 0.8 sec-
Button (REPEAT)
onds to repeat current song.
(cid:129) Press this button for 0.8 seconds or longer
to repeat all songs in current folder.
(cid:129) To cancel REPEAT, press this button
again.
MD_USA_USB
TRACK 4. (cid:129) Press the
Button TRACK
button for less than 0.8 seconds to play from the beginning of the current song. Press the button for less than 0.8 sec onds and press it again within 1 sec- ond to move to and play the previous song. Press the button for 0.8 seconds or longer to play the song in reverse direction in fast speed.
(cid:129) Press the
SEEK
button for less than 0.8 seconds to move to the next song. Press the button for 0.8 seconds or longer to play the song in forward direction in fast speed.
Using USB device
MD_USA_USB
CD/AUX
1. Button (USB or AUX) If the auxiliary device is connected, it switches to AUX or USB mode to play the sound from the auxiliary player. If there is no auxiliary device, then the message “No Media†will become displayed on the LCD for 3 seconds and returns to previ- ous mode.
2. (cid:129) Press this button for less than 0.8 seconds
Button (RANDOM)
to play songs randomly in current folder.
(cid:129) Press this button for 0.8 seconds or longer to play songs randomly in entire USB device.
(cid:129) To cancel RANDOM play, press this
button again.
SCAN
Button
5.
Plays each song in the USB device for 10
seconds. To cancel SCAN Play, press
this button again.
INFO
Button
6. Displays the information of the file cur- rently played in the order of FILE NAME ➟ TITLE ➟ ARTIST ➟ ALBUM ➟ FOLDER ➟ TOTAL FILE ➟ NORMAL DISPLAY ➟ FILE NAME… (Displays no information if the file has no song information.)
CAT
7. (cid:129) Press
Button (CATEGORY)
CAT
button to move to child folder of the current folder and display the first song in the folder. Press ENTER
button.
(cid:129) Press
FLDR
button to move to parent folder display the first song in the fold- er. Press
button.
ENTER
4 113
Features of your vehicle
MD_USA_USB
TUNE
8. Search Button Press the button to display the songs next to the currently played song. press the button to display the songs before to the currently played song.
FILE
9. ENTER Press the select song.
Button ENTER
button to play the
114
✽✽ NOTICE FOR USING THE
iPod® DEVICE
• Some iPod models might not sup- port the communication protocol and the files will not be played. Supported iPod models: - iPod Mini - iPod 4th(Photo) ~ 6th(Classic) generation - iPod Nano 1st~4th generation - iPod Touch 1st~2nd generation
• The order of search or playback of songs in the iPod can be different from the order searched in the audio system.
• If the iPod disabled due to its own malfunction, reset the iPod. (Reset: Refer to iPod manual)
• An iPod may not operate normally
on low battery.
• Some iPod devices, such as the iPhone, can be connected through the Bluetooth® interface. The device must have audio Bluetooth® capabili- ty (such as for stereo headphone Bluetooth®). The device can play, but it will not be controlled by the audio system.
CAUTION IN USING THE iPod® DEVICE
(cid:129) The Hyundai iPod Power Cable is needed in order to operate iPod with the audio buttons on the audio system.The USB cable pro- vided by Apple may cause mal- function and should not be used for Hyundai vehicles. â‹ The Hyundai iPod Power Cable may be purchased through your Hyundai Dealership.
(cid:129) When connecting iPod with the iPod Power Cable,insert the con- nector to the multimedia socket completely. If not inserted com- pletely, communications between iPod and audio may be interrupted. (cid:129) When adjusting the sound effects of the iPod and the audio system,the sound effects of both devices will overlap and might reduce or distort the quality of the sound.
(cid:129) Deactivate (turn off) the equalizer function of an iPod when adjust- ing the audio system’s volume, and turn off the equalizer of the audio system when using the equalizer of an iPod.
(Continued)
Features of your vehicle
(Continued) (cid:129) When the iPod cable is connected, the system can be switched to AUX mode even without iPod device and may cause noise.Disconnect the iPod cable when you are not using the iPod device.
(cid:129) When not using iPod with car audio,detach the iPod cable from iPod.Otherwise,iPod may remain in accessory mode, and may not work properly.
4 115
Features of your vehicle
MD_USA_iPod
Using iPod® ⋠iPod® is a trademark of Apple Inc.
CD/AUX
Button (iPod)
1. If iPod is connected, it switches to the iPod mode from the previous mode to play the song files stored in the iPod. If there is no iPod connected, then it dis- plays the message "No Media" for 3 sec- onds and returns to the previous mode.
TRACK 2. (cid:129) Press the
Button TRACK
button for less than 0.8 seconds to play from the beginning of the song currently played. Press the button for less than 0.8 sec- onds and press it again within 1 second to move to and play the previous track. Press the button for 0.8 seconds or longer to play the song in reverse direction in fast speed.
116
(cid:129) Press the
SEEK
button for less than 0.8 seconds to move to the next track. Press the button for 0.8 seconds or longer to play the song in forward direc- tion in fast speed.
Button (CATEGORY)
5. Moves to the upper category from cur- rently played category of the iPod. To move to (play) the category (song) displayed, MENU You will be able to search through the lower category of the selected category.
INFO
Button
6. Displays the information of the file cur- rently played in the order of TITLE ➟ ARTIST ➟ ALBUM ➟ NORMAL DISPLAY ➟ TITLE... (Displays no informa- tion if the file has no song information.)
MD_USA_iPod
Button (RANDOM)
3. (cid:129) Press this button for less than 0.8 sec- onds to shuffle order of all songs in current category. (Song Random)
(cid:129) Press this button for 0.8 seconds or longer to shuffle order of albums in cur- rent category. (Album Random)
(cid:129) To cancel RANDOM Play, press this
button again.
4. Repeats the song currently played.
Button (REPEAT)
Features of your vehicle
MD_USA_iPod
TUNE
7. Search Button Press the button to display the songs next to the currently played song. press the button to display the songs before to the currently played song.
FILE
8. ENTER Press the select song.
Button ENTER
button to play the
4 117
Features of your vehicle
MD_USA_XM
Using XM satellite Radio
Your vehicle is equipped with 3 months
complimentary period of XM Satellite
Radio. XM provides access to over 130
channels of music, information, and
entertainment programming.
XM
Button
1. Turns to XM Satellite Radio Mode. XM mode toggles in order to XM1➟XM2➟ XM3➟XM1... when the button is pressed each time.
118
SEEK
2. (cid:129) Push
Button
TRACK
button for less than 0.8
second to select previous channel.
(cid:129) Push
TRACK
button for 0.8 second or longer to continuously move to previ- ous channel.
(cid:129) Push
SEEK
button for less than 0.8
second to select next channel.
SEEK
(cid:129) Push
button for 0.8 second or longer to continuously move to next channel. (cid:129) Radio ID : Seek or Tune to XM channel
0 to display the Radio ID.
3. PRESET Buttons
Push
buttons less than
0.8 second to play the channel saved in
each button. Push Preset button for 0.8
second or longer to save current channel
to the respective button with a beep.
MD_USA_XM
SCAN
Button
4. Press to hear a brief sampling of all channel. To cancel the scan mode, press the button once again.
INFO
Button
5. Displays the information of the current channel in the order of Artist/Song title➟ Category/Channel name➟Current Play Channel➟Artist/Song title➟Category/ Channel name... when the button is pressed each time. The complete text information is not displayed, rotate the tune button to see the next page.
CAT 6. (cid:129) Press
Button (CATEGORY)
CAT
FLDR
buttons to enter
the Category List Mode. The display will indicate the category items, highlight the category that the current channel belongs to.
(cid:129) In the Category List Mode, press these
buttons to navigate category list.
Features of your vehicle
(cid:129) Press
ENTER
button to select the low-
est channel in highlighted category.
(cid:129) If channel is selected by selecting cat- egory "CATEGORY" Icon is displayed at the top of the screen.
MD_USA_XM
TUNE
7. Search Button Press the button to display the songs next to the currently played song. press the button to display the songs before to the currently played song.
FILE
8. ENTER Press the select song.
Button ENTER
button to play the
4 119
(continued) (cid:129) Do not place the phone near or inside metallic objects,otherwise communications with Bluetooth® system or cellular service sta- tions can be disturbed.
(cid:129) While a phone is connected through Bluetooth® your phone may discharge quicker than usual for additional Bluetooth®-related operations.
(cid:129) Some cellular phones or other devices may cause interference noise or malfunction to audio system. In this case, storing the device in a different location may resolve the situation.
Features of your vehicle
CAUTION IN USING BLUETOOTH® CELLULAR PHONE
(cid:129) Do not use a cellular phone or perform Bluetooth® settings (e.g. pairing a phone) while driving.
(cid:129) Some Bluetooth®-enabled phones may not be recognized by the system or fully compatible with the system.
(cid:129) Before using Bluetooth® related features of the audio system, refer your phone’s User’s Manual for phone-side Bluetooth® opera- tions.
(cid:129) The phone must be paired to the audio system to use Bluetooth® related features.
(cid:129) You will not be able to use the hands-free feature when your phone (in the car) is outside of the cellular service area (e.g.in a tunnel, in a underground, in a mountainous area,etc.).
(cid:129) If the cellular phone signal is poor or the vehicles interior noise is too loud,it may be difficult to hear the other person’s voice during a call.
(Continued)
120
BLUETOOTH® PHONE OPERATION (if equipped)
1.
2. 3. 4. 5.
VOLUME er volume. MUTE
button : Raises or lowers speak-
: Mute the microphone during a call. button : Activates voice recognition. button : Places and transfers calls. button : Ends calls or cancels func-
tions.
■What is Bluetooth®? Bluetooth® is a wireless technology that allows multiple devices to be connected in a short range, low-powered devices like hands-free, stereo headset, wireless remocon, etc. For more information, visit the Bluetooth® website at www.Bluetooth.com
â– General Features (cid:129) This
audio
system
supports Bluetooth® hands-free and stereo- headset features. - HANDS-FREE feature: Making or receiving calls wirelessly through voice recognition.
- STEREO-HEADSET feature: Playing music from cellular phones (that sup- ports A2DP feature) wirelessly.
(cid:129) Voice
recognition engine of
the Bluetooth® system supports 3 types of languages:
English Canadian French US Spanish
✽✽ NOTICE • The phone must be paired to the sys- tem before using Bluetooth® features. • Only one selected (linked) cellular phone
can be used with the system at a time.
• Some phones are not fully compatible
with this system.
• The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth® SIG, Inc. and any use of such marks by HYUNDAI is under license. A Bluetooth enabled cell phone is required to use Bluetooth® wireless technology.
Features of your vehicle
■Receiving a Phone Call When receiving a phone call, a ringtone is audible from speakers and the audio system changes into telephone mode. When receiving a phone call, “Incoming call†message and incoming phone num- ber (if available) are displayed on the audio.
button on the steering wheel.
(cid:129) To Answer a Call: - Press (cid:129) To Reject a Call: - Press (cid:129) To Adjust Ring Volume: - Use VOLUME buttons on the steering
button on the steering wheel.
wheel.
(cid:129) To Transfer a Call to the Phone (Secret
Call):
- Press and hold
button on the steering wheel until the audio system transfers a call to the phone.
4 121
■Bluetooth® Audio Music Streaming The audio system supports Bluetooth® A2DP (Audio Advanced Distribution Profile) and AVRCP (Audio Video Remote Control Profile) technologies. Both profiles provide steaming of music via compatible “PAIRED†Bluetooth® Cellular phone. To stream music from the Bluetooth® cel- lular phone, play your music files on your cellular phone according to your cellular phone user’s manual and press the button on the audio system until CD/AUX “MP3 play†is displayed on the LCD. The audio system head unit displays ‘MP3 MODE’.
Features of your vehicle
■Talking on the Phone When talking on the phone, “Active Call†message and the other party’s phone number (if available) are displayed on the audio.
(cid:129) To Finish a Call - Press
button on the steering wheel.
✽✽ NOTICE In the following situations, you or the other party may have difficulty hearing each other: 1. Speaking at the same time, your voice may not reach each other parties. (This is not a malfunction.) Speak alternate- ly with the other party on the phone.
2. Keep the Bluetooth® volume to a low level. High-level volume may result in distortion and echo.
3. When driving on a rough road. 4. When driving at high speeds. 5. When the window is open. 6. When the air conditioning vents are
facing the microphone.
7. When the sound of the air condition-
ing fan is loud.
122
NOTE: (cid:129) In addition to streaming MP3 files, all music and sound files your cellu- lar phone supports can be played by the audio system.
(cid:129) Bluetooth®
cellular phones must include A2DP and AVRCP capabilities.
compatible
(cid:129) Some A2DP and AVRCP compatible Bluetooth® cellular phones may not play music through the audio sys- tem initially. These cellular phones may need to have the Bluetooth® streaming enabled, for example; i.e : Menu➟Filemanager➟Music➟ Option➟Play via Bluetooth
(cid:129) Please refer to User’s Guide for your cellular phone for more information. To cancel Bluetooth® cellular phone music streaming, stop music play- back on the cellular phone or change the audio mode to AM/FM, XM, CD, iPod, ect.
■Phone Setup All Bluetooth® related operations can be performed in PHONE menu. 1) Push the
button to enter
SETUP
SETUP mode.
2) Select “Phone†item by rotating the ENTER
knob, then push the
VOL button.
3) Select desired item by rotating the ENTER
knob, then push the
VOL button.
(cid:129) Pairing a phone Before using Bluetooth® features, the phone must be paired (registered) with the audio system. Up to 5 phones can be paired with the system.
NOTE: • The pairing procedure of the phone varies according to each phone model. Before attempting to pair phone, please see your phone’s User’s Guide for instructions.
• Once pairing with the phone is com- pleted, there is no need to pair with that phone again unless the phone is deleted manually from the audio system (refer “Deleting a Phone†section) or the vehicle’s information is removed from the phone.
SETUP
button to enter SETUP
➀ Press mode.
menu.
âž Select “Phoneâ€, then “Pair†in PHONE
➂ The audio displays “Device : [Name]
passkey: 0000â€
➃ Search and select the device name in your mobile phone to starting the pair- ing process.
Features of your vehicle
NOTE: • If the phone is paired with two or more vehicles of the same model, some phones may not handle Bluetooth® devices of that name correctly. In this case, you may need to change the name displayed on your phone. For example, if the vehicles' name is HMC CAR, you may need to change the name displayed on you phone from HMC_CAR to JOHNS_CAR or HMC CAR_1 to avoid ambiguity. Refer to your phone User’s Guide, or contact your cellular carrier or phone manufacturer for instructions.
(cid:129) Connecting a phone When the Bluetooth® system is enabled, the phone previously used is automati- cally selected and re-connected. If you want to select different phone previously paired, the phone can be selected through “Select Phone†menu. Only a selected phone can be used with the hands-free system at a time.
SETUP
button to enter SETUP
âž Select “Phoneâ€, then “Select†in PHONE
➀ Press mode.
menu.
4 123
Features of your vehicle
âž‚ Select desired phone name from the list
shown.
➃ The Bluetooth® icon appears on the upper side of audio display when a phone is connected.
(cid:129) Changing Priority If several phones are paired with the audio system, the system attempts to connect the Bluetooth® system is enabled: 1) “Priority†checked phone. 2) Previously connected phone 3) Gives up auto connection.
following order when
SETUP
button to enter SETUP
âž Select “Phoneâ€, then “Priority†in PHONE
➀ Press mode.
menu.
124
âž‚ Select desired phone name from the
list shown.
SETUP
(cid:129) ADVANCED Menu After pressing the button, select “Phone†menu. while in PHONE menu, select the “Advanced†menu to make Bluetooth® Phone settings. (The ADVANCED menu may differ accord- ing to audio specifications.)
(cid:129) Deleting a Phone The paired phone can be deleted. - When the phone is deleted, all the infor- mation associated with that phone is also deleted (including phonebook).
- If you want to use the deleted phone with the audio system again, pairing proce- dure must be completed once more.
SETUP
button to enter SETUP
âž Select “Phoneâ€, then “Delete†in PHONE
âž‚ Select desired phone name from the list
➀ Press mode.
menu.
shown.
Incoming Volume (Bluetooth® call vol- ume adjustments) While in ADVANCED menu, select “In Vol.†Use the knob key to set the desired volume and press the ENTER button.
Contacts Sync (Automatic Phonebook download setting) While in ADVANCED menu, select “Contacts†To automatically save the con- tacts and call history in your mobile phone each time you connect a mobile device, select ON. If you do not wish for automatic download, select OFF. It’s not available to make a phone call by bluetooth audio system while the phone- book is being downloaded.
Language of Bluetooth® voice recognition While in ADVANCED menu, press “Languageâ€. To change the language, select the desired language and press the
button.
ENTER
Bluetooth® system off While in ADVANCED menu, select “BT Off†to turn off the Bluetooth® System.
Features of your vehicle
■Menu tree The menu tree identifies available voice recognition Bluetooth® functions.
Call [Name] Ex) Call John (at Home)
Dial [Number]
Ex) Dial 911
Call
By name
By number
Redial
Call Back
Phonebook
Add entry
By voice
By phone
Change name
Delete name
■Voice Recognition Activation (cid:129) The voice recognition engine contained in the Bluetooth® System can be acti- vated in the following conditions: - Button Activation
The voice recognition system will be active when the button is pressed and after the sound of a Beep.
- Active Listening
The voice recognition system will be active for a period of time when the Voice Recognition system has asked for a customer response.
(cid:129) The system can recognize single digits from zero to nine while number greater than ten will not be recognized.
(cid:129) The system shall cancel voice recogni- tion mode in following cases : When pressing the button and saying cancel following the beep. When not making a call and pressing the button. When voice recognition has failed 3 consecutive times.
(cid:129) At any time if you say “helpâ€, the system will announce what commands are available.
4 125
Features of your vehicle
✽✽ Tip ■Voice Operation To get the best performance out of the Voice Recognition System, observe the followings: - Keep the interior of the vehicle as quiet as possible. Close the window to eliminate surrounding noise (traffic noise, vibration sounds, etc), which may disturb recogniz- ing the voice command correctly.
- Speak a command after a beep sound within 5 seconds. Otherwise the command will not be received properly.
- Speak in a natural voice without
pausing between words.
- While receiving voice commands, press the button on the steer- ing wheel remote controller to ter- minate guidance. Voice command will convert back to waiting mode to allow the user to say a new voice command.
126
■Making a Phone Call (cid:129) Direct Calling ➀ Press ➠Say the following command.
button.
- Call
the call to john’s home number.
- Call
the call to John’s office number.
Note: Calls can be immediately connected to contacts who name or voice tag are saved in the phonebook(or contacts).
(cid:129) Calling by Name A phone call can be made by speaking names registered in the audio system.
button.
➀ Press âž Say “Callâ€. âž‚ Say “By name†when prompted. ➃ Say desired name (in Phonebook or
voice tag).
âž„ Say desired location (phone number type). Only stored locations can be selected.
➅ Say “Yes†to confirm and make a call.
✽✽ Tip A shortcut to each of the following func- tions is available: 1. Say “Call Nameâ€
(cid:129) Dialing by Number A phone call can be made by dialing the spoken numbers. The system can recog- nize single digits from zero to nine.
button.
➀ Press âž Say “Callâ€. âž‚ Say “By number†when prompted. ➃ Say desired phone numbers. âž„ Say “Dial†to complete the number and
make a call.
✽✽ Tip
A shortcut to each of the following func-
tions is available:
➀ Say “Dial Numberâ€
➠Say “Dial
â– Phone Book (In-Vehicle) (cid:129) Adding entry by voice Phone numbers and voice tags can be registered. Entries registered in the phone can also be transferred.
➀ Press button. ➠Say "Phonebook". - The system replies with all available
commands.
- To skip the information message, again and then a beep is
press heard.
âž‚ Say “Add Entryâ€. ➃ Say “By Voice†to proceed. âž„ Say the name of the entry when
prompted.
➅ Say “Yes†to confirm. ➆ Say the phone number of that entry
when prompted.
➇ Say “Store†if phone number input is
finished.
➈ Say a phone number type. “Homeâ€, “Workâ€, “Mobileâ€, “Other†or “Default†is available.
➉ Say “Yes†to complete adding entry.
11
Say “Yes†to store additional location for this contact, or say “Cancel†to fin- ish the process.
✽✽ NOTICE - The system can recognize single digits from zero to nine. Numbers that are ten or greater cannot be recognized.
- You can enter each digit individually or group digits together in preferred string lengths.
- To speed up input, it is a good idea to
group all digits into a continuous string.
- Recommend to enter the numbers
constituted an grouping within all
digit numbers to dial 995 / 734 / 0000
- The display corresponding to each
operation appears on the screen as fol-
lows:
Input operation example:
1. Say: “Nine, nine, fiveâ€
➟ Display: “995â€
2. And say: “Seven, three, fourâ€
➟ Display: “995734â€
Features of your vehicle
(cid:129) Adding Entry by Phone ➀ Press button. ➠Say "Phonebook". ➂ Say "Add Entry" after prompt. ➃ Say "By Phone" to proceed. ➄ Say “Yes†to confirm. ➅ Your phone will start to transfer phone/contact list to the audio system. This process may take over 10 min- utes depending on the phone model and number of entries
➆ Wait till the audio displays “Transfer
Complete†message.
(cid:129) Changing Name The registered names can be modified.
➀ Press button. âž Say “Phonebookâ€. âž‚ Say “Change Name†after prompt. ➃ Say the name of the entry (voice tag). âž„ Say “Yes†to confirm. âž… Say new desired name.
4 127
Features of your vehicle
(cid:129) Deleting Name The registered names can be deleted.
➀ Press button. âž Say “Phonebookâ€. âž‚ Say “Delete Name†after prompt. ➃ Say the name of the entry (voice tag). âž„ Say “Yes†to confirm.
■Bluetooth® Audio Speaker Adaptation Speaker adaptation will improve perform- ance of voice recognition system to a particular user voice. This will degrade the performance for other users.
button for 10sec.
(cid:129) Record ➀ Press âž Say “Record profileâ€. âž‚ Say “Yesâ€. ➃ Say the word displayed on Radio.
(cid:129) Delete ➀ Press âž Say “Delete profileâ€. âž‚ Say “Yesâ€.
button for 10sec.
128
Features of your vehicle
â– Key matrix
No.
KEY
Paired H/P
Empty
Disconnected
Connected
Normal mode BT SETUP menu
Incoming Call Outgoing Call
Active Call
2nd Call
Class
SHORT
Not Paired
Not Connecting
LONG
Accept Call
2nd call
2nd Call
1st Call:waiting 2nd Call:active
2nd Call:waiting 1st Call:active
Transfer call:secret call
SHORT
VR
VR
VR
VR
MODE Cancel
MODE Cancel
MODE Cancel
MODE Cancel
Reject Call
End Call
End Call
End Call
LONG [10sec]
Speaker Adaptation
Speaker Adaptation
(Only English)
(Only English)
SHORT
Active
Active
Active
Active
LONG [10sec]
4 129
Before driving / 5-3
Key / 5-5
Engine start/stop button / 5-8
Manual transaxle /5-12
Automatic transaxle / 5-15
Brake system / 5-21
Cruise control system / 5-31
Economical operation / 5-35
Special driving conditions / 5-37
Winter driving / 5-41
Vehicle load limit / 5-45
Driving your vehicle
Vehicle weight / 5-50
Trailer towing / 5-51
Driving your vehicle
WARNING - ENGINE EXHAUST CAN BE DANGEROUS!
Engine exhaust fumes can be extremely dangerous. If, at any time, you smell exhaust fumes inside the vehicle, open the win- dows immediately.
• Do not inhale exhaust fumes.
Exhaust fumes contain carbon monoxide, a colorless, odorless gas that can cause unconsciousness and death by asphyxia- tion.
(cid:129) Be sure the exhaust system does not leak.
The exhaust system should be checked whenever the vehicle is raised to change the oil or for any other purpose. If you hear a change in the sound of the exhaust or if you drive over something that strikes the underneath side of the car, have the exhaust system checked as soon as possible by an authorized HYUNDAI dealer.
(cid:129) Do not run the engine in an enclosed area.
Letting the engine idle in your garage, even with the garage door open, is a hazardous practice. Never run the engine in your garage any longer than it takes to start the engine and back the car out.
(cid:129) Avoid idling the engine for prolonged periods with people inside the car.
If it is necessary to idle the engine for a prolonged period with people inside the car, be sure to do so only in an open area with the air intake set at "Fresh" and fan operating at one of the higher speeds so fresh air is drawn into the interior.
If you must drive with the trunk lid open because you are carrying objects that make this necessary: 1. Close all windows. 2. Open side vents. 3. Set the air intake control at "Fresh", the air flow control at "Floor" or "Face" and the fan at one of the higher speeds.
To assure proper operation of the ventilation system, be sure the ventilation air intakes located just in front of the windshield are kept clear of snow, ice, leaves or other obstructions.
25
BEFORE DRIVING Before entering vehicle • Be sure that all windows, outside mir-
ror(s), and outside lights are clean.
(cid:129) Check the condition of the tires. (cid:129) Check under the vehicle for any sign of
leaks.
(cid:129) Be sure there are no obstacles behind
you if you intend to back up.
CALIFORNIA PROPOSI- TION 65 WARNING
Engine exhaust and a wide variety of automobile components and parts, including components found in the interior furnishings in a vehi- cle, contain or emit chemicals known to the State of California to cause cancer and birth defects and reproductive harm. In addition, cer- tain fluids contained in vehicles and certain products of component wear contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Driving your vehicle
Necessary inspections Fluid levels, such as engine oil, engine coolant, brake fluid, and washer fluid should be checked on a regular basis, with the exact interval depending on the fluid. Further details are provided in sec- tion 7, “Maintenanceâ€.
WARNING
Driving while distracted can result in a loss of vehicle control, that may lead to an accident, severe personal injury, and death. The dri- ver’s primary responsibility is in the safe and legal operation of a vehicle, and use of any handheld devices, other equipment, or vehi- cle systems which take the driver’s eyes, attention and focus away from the safe operation of a vehicle or which are not permissible by law should never be used during oper- ation of the vehicle.
5 3
Driving your vehicle
Before starting (cid:129) Close and lock all doors. (cid:129) Position the seat so that all controls are
easily reached.
(cid:129) Adjust the inside and outside rearview
mirrors.
(cid:129) Be sure that all lights work. (cid:129) Check all gauges. (cid:129) Check the operation of warning lights when the ignition switch is turned to the ON position.
(cid:129) Release the parking brake and make sure the brake warning light goes out. For safe operation, be sure you are famil- iar with your vehicle and its equipment.
WARNING
All passengers must be properly belted whenever the vehicle is mov- ing. Refer to “Seat belts†in section 3 for more information on their proper use.
45
WARNING
(cid:129) When you intend to park or stop the vehicle with the engine on, be careful not to depress the accel- erator pedal for a long period of time. It may overheat the engine or exhaust system and cause fire. (cid:129) When you make a sudden stop or turn the steering wheel rapidly, loose objects may drop on the floor and it could interfere with the operation of the foot pedals, possibly causing an accident. Keep all things in the vehicle safely stored.
(cid:129) If you do not focus on driving, it may cause an accident. Be care- ful when operating what may dis- turb driving such as audio or heater. It is the responsibility of the driver to always drive safely.
WARNING
Always check the surrounding areas near your vehicle for people, especially children, before putting a car into D (Drive) or R (Reverse).
WARNING - Driving under the influence of alcohol or drugs
Drinking and driving is dangerous. Drunk driving is the number one contributor to the highway death toll each year. Even a small amount of alcohol will affect your reflexes, perceptions and judgment. Driving while under the influence of drugs is as dangerous or more dangerous than driving drunk. You are much more likely to have a serious accident if you drink or take drugs and drive. If you are drinking or taking drugs, don’t drive. Do not ride with a driv- er who has been drinking or taking drugs. Choose a designated driver or call a cab.
KEY
OYF059017N
OYF059016
Illuminated ignition switch (if equipped) Whenever a front door is opened, the ignition switch will be illuminated for your convenience, provided the ignition switch is not in the ON position. The light will go off immediately when the ignition switch is turned on or go off after about 30 sec- onds when the door is closed.
Ignition switch position LOCK The steering wheel locks to protect against theft (if equipped). The ignition key can be removed only in the LOCK position. When turning the ignition switch to the LOCK position, push the key inward at the ACC position and turn the key toward the LOCK position.
Driving your vehicle
ACC (Accessory) The steering wheel is unlocked (if equipped) and electrical accessories are operative.
✽✽ NOTICE If difficulty is experienced in turning the ignition switch to the ACC position, turn the key while turning the steering wheel right and left to release the tension.
5 5
Driving your vehicle
ON The warning lights can be checked before the engine is started. This is the normal running position after the engine is started.