2009 Honda Ridgeline Owners Manual

CHK DISC LOAD

BAD DISC

PLEASE CHECK

Servo Error

OWNER’S MANUAL CHECK DISC ＊ DISC ERROR ＊

Disc Error

＊ ＊

1 : 2 :

On models without navigation system On models with navigation system

Will disappear when the temperature returns to normal. Current track will be skipped. The next supported track or file plays automatically. Press the EJECT button and pull out the disc(s). Check the disc for serious damage, signs of deformation, excessive scratches, and/or dirt (see page 199). Insert the disc again. If the code does not disappear, or the disc(s) cannot be removed, consult your dealer. Do not try to force the disc out the player.

Check the disc for serious damage, signs of deformation, excessive scratches, and/or dirt (see page 199).

201

2009 Ridgeline ０８／０６／０２　２０：１１：２２　３１ＳＪＣ６３０　０２０７　

Remote Audio Controls

OnRTS,RTLandCanadianEX-L models

MODE BUTTON

The MODE button changes the mode. Pressing the button repeatedly selects FM1, FM2, AM, XM1, XM2 (if equipped), CD (if a disc is loaded), or AUX-Audio.

If you are listening to the radio, use the CH button to change stations. Each time you press the top ( ) of the button, the system goes to the next preset station on the band you are listening to. Press the bottom − station.

) to go back to the previous

＋

To search up and down from the current frequency and find a station with a strong signal, press the top ＋ 1 second.

) of the button for

) or bottom (

−

VOL BUTTON

CH BUTTON

Three controls for the audio system are mounted in the steering wheel hub. These let you control basic functions without removing your hand from the wheel.

▲

) or down (

The VOL button adjusts the volume up ( ). Press the top or bottom of the button, hold it until the desired volume is reached, then release it.

▼

202

If you are playing a disc, the system skips to the beginning of the next track each time you press the top ) of the CH button. Press the ＋ bottom ( beginning of the current track. Press it again to return to the previous track. You will see the disc and track numbers in the upper display.

) to return to the

−

) of the button for 1 second.

To go to the next disc, press the top ＋ Press the bottom ( to go back to the previous disc.

) for 1 second

−

Onmodelswithoutnavigationsystem When you play an MP3/WMA disc, press the top ( ) of the button for 1
second to go to the next folder. Press the bottom ( back to the previous folder.

) for 1 second to go

＋

−

2009 Ridgeline ０８／０６／０２　２０：１１：２８　３１ＳＪＣ６３０　０２０８　

＋

If you are listening to XM Satellite Radio, use the CH button to change channels. Each time you press the top ( ) of the button, the system goes to the next preset channel. Press the bottom ( the previous preset channel. To go to the next channel of the category you are listening to, press the top ( second. Press the bottom ( second to go back to the previous channel.

) of the button for 1
−

) to go back to

) for 1

−

＋

Remote Audio Controls, Auxiliary Input Jack

Auxiliary Input Jack

AUXILIARY INPUT JACK

ExceptRTandCanadianDXmodels The auxiliary input jack is on the tray above the glove box. The system will accept auxiliary input from standard audio accessories.

When the appropriate audio unit is connected to the auxiliary input jack, press the CD/AUX or AUX button to select the unit.

203

2009 Ridgeline ０８／０６／０２　２０：１１：３４　３１ＳＪＣ６３０　０２０９　

Radio Theft Protection

Your vehicle’s audio system will disable itself if it is disconnected from electrical power for any reason. To make it work again, you must enter a specific code with the preset bars. Because there are hundreds of number combinations possible from the five digits, making the system work without knowing the exact code is nearly impossible.

You should have received a radio code card that lists your audio system’s code and serial numbers. It is best to store this card in a safe place at home. In addition, you should write the audio system’s serial number in this owner’s manual.

If you lose the card, you must obtain the code number from your dealer. To do this, you will need the audio system’s serial number.

204

If your vehicle’s battery is disconnected or goes dead, or the radio fuse is removed, the audio system will disable itself. If this happens, you will see ‘‘ENTER CODE’’ in the frequency display the next time you turn on the system. Use the preset bars to enter the code. The code is located on the radio code card included in your owner’s manual kit. When it is entered correctly, the radio will start playing.

If you make a mistake entering the code, do not start over; complete the sequence, then enter the correct code. You have ten tries to enter the correct code. If you are unsuccessful in ten attempts, you must then leave the system on for 1 hour before trying again.

2009 Ridgeline ０８／０６／０２　２１：３５：２４　３１ＳＪＣ６３０　０２１０　

RT, Canadian DX, and VP models

RTS, RTL, and Canadian EX-L models without navigation system

Setting the Clock

CLOCK BUTTON

CLOCK BUTTON

PRESET BARS

Model without XM satellite radio model is shown.

PRESET BARS

Onmodelswithoutnavigationsystem If your vehicle’s battery is disconnected or goes dead, you may need to set the clock.

To set the time, press the CLOCK button until you hear a beep. The displayed time begins to blink.

Press and hold the H (Preset 1) side of the bar until the hour advances to the desired time. Press and hold the M (Preset 2) side of the bar until the minutes advance to the desired time.

Press the clock set button again to enter the set time.

For example:

1:06 will reset to 1:00
1:52 will reset to 2:00

You can quickly set the time to the nearest hour. If the displayed time is before the half hour, pressing the clock set button until you hear a beep, then pressing the R (Preset 3) side of the bar sets the clock back to the previous hour. If the displayed time is after the half hour, the clock sets forward to the beginning of the next hour.

Onmodelswithnavigationsystem The navigation system receives signals from the global positioning system (GPS), and the displayed time is updated automatically by the GPS. Refer to the navigation system manual for how to adjust the time.

205

2009 Ridgeline ０８／０６／０２　２０：１１：５２　３１ＳＪＣ６３０　０２１１　

Security System

Ifequipped The security system helps to protect your vehicle and valuables from theft. The horn sounds and a combination of headlights, parking lights, license plate lights, and taillights flash if someone attempts to break into your vehicle or remove the radio. This alarm continues for 2 minutes, then the system resets. To reset an activated system before the 2
minutes have elapsed, unlock the driver’s door with the key or the remote transmitter.

The security system automatically sets 15 seconds after you lock the doors, hood, and the In-Bed Trunk. For the system to activate, you must lock the doors from the outside with the key, driver’s lock tab, door lock switch, or remote transmitter. The security system indicator on the instrument panel starts blinking immediately to show you the system is setting itself.

206

The security system will not set if the hood, In-Bed Trunk, or any door is not fully closed. If the system will not set, check the door and tailgate open monitor and In-Bed Trunk open indicator on the instrument panel (see pages ) to see if the doors and In-Bed Trunk are fully closed. Since it is not part of the monitor display, manually check the hood.

and

11

75

SECURITY SYSTEM INDICATOR

Once the security system is set, opening any door (without using the key or the remote transmitter), the hood, or the In-Bed Trunk, will cause it to alarm. It also alarms if the radio and navigation components are removed from the dashboard or the wiring is cut.

Use the remote transmitter

NOTE: to quickly check that the hood, In-Bed Trunk, and all doors are closed. Push the lock button twice within 5 seconds. There should be an audible confirmation beep.

Do not attempt to alter this system or add other devices to it.

2009 Ridgeline ０８／０６／０２　２０：１２：００　３１ＳＪＣ６３０　０２１２　

Cruise control allows you to maintain a set speed above 25 mph (40 km/h) without keeping your foot on the accelerator pedal. It should be used for cruising on straight, open highways. It is not recommended for city driving, winding roads, slippery roads, heavy rain, or bad weather.

Using Cruise Control

CRUISE BUTTON

RES/ACCEL BUTTON

CANCEL BUTTON

Improper use of the cruise control can lead to a crash.

Use the cruise control only when traveling on open highways in good weather.

SET/DECEL BUTTON

1.

Push in the CRUISE button on the steering wheel. The CRUISE MAIN indicator on the instrument panel comes on.

The cruise control system can be left on, even when it is not in use.

2.

Accelerate to the desired cruising speed above 25 mph (40 km/h).

Cruise Control

3.

Press and release the SET/ DECEL button on the steering wheel. The CRUISE CONTROL indicator on the instrument panel comes on to show the system is now activated.

CONTINUED

207

2009 Ridgeline ０８／０６／０２　２０：１２：０９　３１ＳＪＣ６３０　０２１３　

Cruise Control

Cruise control may not hold the set speed when you are going up and down hills. If your vehicle speed increases going down a hill, use the brakes to slow down. This will cancel the cruise control. To resume the set speed, press the RES/ACCEL button. The CRUISE CONTROL indicator on the instrument panel will come back on.

When climbing a steep hill, the automatic transmission may downshift to hold the set speed.

208

Changing the Set Speed You can increase the set cruising speed in any of these ways:

Press and hold the RES/ACCEL button. When you reach the desired cruising speed, release the button.

Push on the accelerator pedal. Accelerate to the desired cruising speed, then press the SET/ DECEL button.

To increase the speed in very small amounts, tap the RES/ ACCEL button. Each time you do this, your vehicle will speed up about 1 mph (1.6 km/h).

You can decrease the set cruising speed in any of these ways:

If you need to decrease your NOTE: speed quickly, use the brakes as you normally would.

Press and hold the SET/DECEL button. Release the button when you reach the desired speed.

To slow down in very small amounts, tap the SET/DECEL button. Each time you do this, your vehicle will slow down about 1 mph (1.6 km/h).

Tap the brake pedal lightly with your foot. The CRUISE CONTROL indicator on the instrument panel will go out. When the vehicle slows to the desired speed, press the SET/ DECEL button.

2009 Ridgeline ０８／０６／０２　２０：１２：１８　３１ＳＪＣ６３０　０２１４　

Canceling Cruise Control

CRUISE BUTTON

Even with cruise control turned on, you can still use the accelerator pedal to speed up for passing. After completing the pass, take your foot off the accelerator pedal. The vehicle will return to the set cruising speed.

Resting your foot on the brake pedal causes cruise control to cancel.

CANCEL BUTTON

You can cancel cruise control in any of these ways:

Tap the brake pedal.

Push the CANCEL button on the steering wheel.

Push the CRUISE button on the steering wheel.

Cruise Control

Resuming the Set Speed When you push the CANCEL button or tap the brake pedal, the system remembers the previously set speed. To return to that speed, accelerate to above 25 mph (40 km/h), then press and release the RES/ACCEL button. The CRUISE CONTROL indicator comes on. The vehicle accelerates to the same speed as before.

Pressing the CRUISE button turns the system completely off and erases the previous cruising speed.

209

2009 Ridgeline ０８／０６／０２　２０：１２：２５　３１ＳＪＣ６３０　０２１５　

Compass

Compass Function Ifequipped Your vehicle has a compass in the rear view mirror. The compass indicates the vehicle direction with illuminated letters: N (north), S (south), W (west), and E (east). The center blue icon in the compass is always on. It serves as a reference point.

210

The compass can be affected by driving near power lines or stations, across bridges, through tunnels, over railroad crossings, past large vehicles, or driving near large objects that cause magnetic interference. It can also be affected by accessories such as antennas and roof racks that are mounted by magnets.

The compass mirror has a light sensor behind the right side of the rear view mirror. Make sure the extended sun visor or an accessory is not covering the sensor.

REAR VIEW MIRROR

COMPASS BUTTON

CENTER ICON

The direction and center position icons come on when you turn the ignition switch to the ON (II) position. The system then begins to check the vehicle direction and illuminates the appropriate icon(s).

To turn the compass on or off, press the compass button on the back of the rear view mirror.

2009 Ridgeline ０８／０６／０２　２０：１２：３６　３１ＳＪＣ６３０　０２１６　

Compass Calibration The compass may need to be manually calibrated after exposure to a strong magnetic field. If the compass seems to continually show the wrong direction, do this.

Do this procedure in an open

NOTE: area, away from buildings, power lines, and other vehicles.

1.

With the blue center icon displayed, press and hold the compass button for about 6
seconds. When the center icon turns red, release the button.

2.

Drive the vehicle slowly in circles at less than 5 mph (8 km/h) until the center icon turns blue. This icon also turns blue by continuing to drive the vehicle under normal driving conditions. When you see an actual heading on the compass, calibration is completed.

Compass Zone Selection In most areas, there is a variation between magnetic north and true north. Zone selection is required so the compass can compensate for this variation. To check and select the zone, do this:

1.

Find the zone for your area on the zone map (see page zone number (1 through 15) corresponds to a compass zone on the table (see page

). Each

212

212

).

Compass

2.

Press and hold the compass button for about 3 seconds. When all of the direction icons begin to blink, release the button.

3.

The blue direction icon(s) blink and show the current zone.

4.

5.

If the zone is incorrect, press and release the compass button repeatedly to get to the correct number.

The compass will return to the normal display about 4 seconds after you stop adjusting a zone number.

CONTINUED

211

2009 Ridgeline ０８／０６／０２　２０：１２：３９　３１ＳＪＣ６３０　０２１７　

Compass

Zone Map

Compass Display for Each Zone

212

2009 Ridgeline ０８／０６／０２　２０：１２：４５　３１ＳＪＣ６３０　０２１８　

HomeLink Universal Transceiver

Ifequipped The HomeLink Universal Transceiver built into your vehicle can be programmed to operate up to three remote controlled devices around your home, such as garage doors, lighting, or home security systems.

General Information Before programming your HomeLink to operate a garage door opener, confirm that the opener has an external entrapment protection system, such as an ‘‘electronic eye,’’ or other safety and reverse stop features.

If your garage door was manufactured before April 1, 1982, you may not be able to program HomeLink to operate it. These units do not have safety features that cause the motor to stop and reverse it if an obstacle is detected during closing, increasing the risk of injury.

Do not use HomeLink with any garage door opener that lacks safety stop and reverse features.

CONTINUED

213

2009 Ridgeline ０８／０６／０２　２０：１２：５２　３１ＳＪＣ６３０　０２１９　

HomeLink Universal Transceiver

Units manufactured between April 1, 1982 and January 1, 1993 may be equipped with safety stop and reverse features. If your unit does not have an external entrapment protection system, an easy test to confirm the function and performance of the safety stop and reverse feature is to lay a 2
under the closing door. The door should stop and reverse upon contacting the piece of wood. As an additional safety feature, garage door openers manufactured after January 1, 1993 are required to have external entrapment protection systems, such as an electronic eye, which detect an object obstructing the door.

×

Important Safety Precautions Refer to the safety information that came with your garage door opener to test that the safety features are functioning properly. If you do not have this information, contact the manufacturer of the equipment. Before programming HomeLink to a garage door or gate opener, make sure that people and objects are out of the way of the device to prevent potential injury or damage. When programming a garage door opener, park just outside the garage.

214

−

If you just

Training HomeLink Beforeyoubegin received your vehicle and have not trained any of the buttons in HomeLink before, you should erase any previously learned codes before training the first button. To do this, press and hold the two outside buttons on the HomeLink transceiver for about 20 seconds, until the red indicator flashes. Release the buttons, then proceed to step 1.

2009 Ridgeline ０８／０６／０３　１７：５０：１０　３１ＳＪＣ６３０　０２２０　

If you are training the second or third buttons, go directly to step 1.

HomeLink Universal Transceiver

CONTINUED 215

2009 Ridgeline ０８／０６／０２　２０：１３：１１　３１ＳＪＣ６３０　０２２１　

HomeLink Universal Transceiver

HomeLink is a registered trademark of Johnson Controls, Inc.

AsrequiredbytheFCC: ThisdevicecomplieswithPart15ofthe FCCrules.Operationissubjecttothe followingtwoconditions:(1)Thisdevice maynotcauseharmfulinterference,and (2)thisdevicemustacceptany interferencereceived,including interferencethatmaycauseundesired operation.

Changesormodificationsnotexpressly approvedbythepartyresponsiblefor compliancecouldvoidtheuser’s authoritytooperatetheequipment.

ThisdevicecomplieswithIndustry CanadaStandardRSS-210. Operationissubjecttothefollowingtwo conditions:(1)thisdevicemaynotcause interference,and(2)thisdevicemust acceptanyinterferencethatmaycause undesiredoperationofthedevice.

216

2009 Ridgeline ０８／０６／０２　２０：１３：１９　３１ＳＪＣ６３０　０２２２　

Bluetooth HandsFreeLink

Onmodelswithnavigationsystem Your vehicle is equipped with the Bluetooth HandsFreeLink (HFL). HFL uses Bluetooth technology to link your cell phone to your vehicle. With HFL, you can place and receive calls through your vehicle’s audio system, without the distraction of handling your cell phone. To use this feature, you need a Bluetooth- compatible cell phone with the Hands Free Profile. For more information, and a list of compatible cell phones, visit handsfreelink.honda. com Canada, visit (888) 9-HONDA-9. The HFL is available in both English and French (Canadian models only). To change the language, see page 243

, or call (888) 528-7876. In

www.honda.ca

, or call

Here are the main features of the HFL. Instructions for using the HFL begin on page

221

Voice Control HFL recognizes simple voice commands, such as phone numbers and names. It uses these commands to automatically dial, receive, and store numbers. For more information on voice control, see Using Voice Control on page 221

Bluetooth Wireless Technology Bluetooth is a registered trademark of Bluetooth SIG, Inc. Bluetooth is the wireless technology that links your phone to the HFL. The HFL uses a Class 2 Bluetooth, which means the maximum range between your phone and vehicle is 30 feet (10 meters). To use the HFL, your phone must have approved Bluetooth capability along with the Hands Free Profile. This type of phone is available through many phone makers and cellular carriers. You can also find an approved phone by visiting handsfreelink.honda.com

, or by calling

the Hands Free Link consumer support at (888) 528-7876. In Canada, visit HONDA-9.

, or call (888) 9-

www.honda.ca

The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Honda Motor Co., Ltd. is under license. Other trademarks and trade names are those of their respective owners.

Incoming/Outgoing Calls With a linked phone, the HFL allows you to send and receive calls in your vehicle without holding the phone.

217

2009 Ridgeline ０８／０６／０２　２０：１３：２８　３１ＳＪＣ６３０　０２２３　

Microphone The HFL microphone is on the ceiling, between the front map lights and the HomeLink buttons. On models with navigation system, the microphone is shared with the navigation system.

Audio System When the HFL is in use, the sound comes through the vehicle’s front audio system speakers. If the audio system is in use while operating either of the HFL buttons or making a call, the HFL over-rides the audio system. To change the volume level, use the audio system volume knob, or the steering wheel volume controls.

HFL Buttons

HFL TALK BUTTON

HFL BACK BUTTON

To operate the HFL, use the HFL Talk and Back buttons on the left side of the steering wheel.

Bluetooth HandsFreeLink

Phonebook The HFL can store up to 50 names and phone numbers in its phonebook. With a linked phone, you can then automatically dial any name or number in the phonebook.

Your vehicle’s HFL system has the cellular phonebook import function. This allows you to import your cellular phonebook to the HFL. Using the navigation system, you can make a call directly and store a desired number in the HFL from the list shown on the navigation display. For more information on how to import the phonebook or to make a call, see page

228

You can also store the desired number to the HFL directly from your cell phone using the receive contact function in the HFL.

218

2009 Ridgeline ０８／０６／０２　２０：１３：３７　３１ＳＪＣ６３０　０２２４　

The HFL buttons are used as follows:

HFL Talk: This button is used before you give a command, to answer incoming calls, and to confirm system information. Press and release the button, then wait for a beep before giving a command.

HFL Back: This button is used to end a call, go back to the previous voice control command, and to cancel an operation.

Information Display

Bluetooth HandsFreeLink

You will also see ‘‘HANDS FREE LINK’’ on the audio display.

‘‘ ’’ indicator will be displayed on the audio display if your Bluetooth - compatible phone is linked to the HandsFreeLink .

BLUETOOTH INDICATOR

When you are operating the HFL, dialing or receiving calls with the audio system in use, you will see the above screen on the navigation display.

219

2009 Ridgeline ０８／０６／０２　２０：１３：４５　３１ＳＪＣ６３０　０２２５　

＊

−

Indicates the

Signal Strength network signal strength of the current phone. Five bars equals full strength.

＊

Battery Level Status Indicates the power currently remaining in your phone’s battery. Five bars equals full battery strength.

−

ROAM Status − phone is roaming.

＊

Indicates your

HFL Mode are dialing and receiving calls.

Indicates when you

−

Phone Dialing number you entered or the number of the incoming call.

Indicates the

−

＊

Some phones do not send this information to the HFL.

Bluetooth HandsFreeLink

Multi-Information Display

SIGNAL STRENGTH

HFL MODE

BATTERY LEVEL STATUS

ROAM STATUS

PHONE DIALING

When you are operating the HFL, or when you manually select HFL on the multi-information display, you will see this information on the screen:

220

2009 Ridgeline ０８／０６／０２　２０：１３：５５　３１ＳＪＣ６３０　０２２６　

How to Use the HFL The HFL is operated by the HFL Talk and Back buttons on the left side of the steering wheel. The next few pages provide instructions for all basic features of the HFL.

All phones may not

NOTE: operate identically, and some may cause inconsistent operation of the HFL.

Using Voice Control Here are some guidelines for using voice control:

To enter a command, press and release the Talk button. Then, after the beep, say your command in a clear, natural tone.

Close the windows and the moonroof.

Lower the A/C fan speed during voice recognition operation.

Adjust the airflow from both the dashboard and side vents so they do not blow against the microphone on the ceiling.

Bluetooth HandsFreeLink

Give a voice command in a clear natural speaking voice without pausing between words or numbers. If the system cannot recognize your command because of the background noise, speak louder.

If the microphone picks up voices other than yours, the system may not interpret your voice commands correctly.

If the HFL does not recognize a command, its response is, ‘‘Pardon.’’ If it doesn’t recognize the command a second time, its response is, ‘‘Please repeat.’’ If it doesn’t recognize the command a third time, it plays the Help prompt.

CONTINUED

221

2009 Ridgeline When you finish a command sequence, the HFL goes back to its main menu. For example, when you store the name, ‘‘Eric,’’ the HFL response is, ‘‘Eric has been stored.’’ The next time you press the Talk button, you will be at the main menu.

０８／０６／０２　２０：１４：０１　３１ＳＪＣ６３０　０２２７　

Bluetooth HandsFreeLink

To hear a list of available options at any time, press the Talk button, wait for the beep, and say, ‘‘Hands free help.’’

Many commands can be spoken together. For example, you can say, ‘‘Dial 123-456-7891.’’

To enter a string of numbers in a Call or Dial command, you can say them all at once, or you can separate them in blocks of 3, 4, 7, 10, and 11.

To skip a voice prompt, press the Talk button while the HFL is speaking. The HFL will then begin listening for your next command.

To go back one step in a command process, say, ‘‘Go back,’’ or press the Back button. If nothing is said while the HFL is listening for a command, the HFL will time out and stop its voice recognition. The next time you press the Talk button, the HFL begins listening from the point at which it timed out.

To end a command sequence at any time, press and hold the Back button, or press and release the Talk button, wait for the beep, and say, ‘‘Cancel.’’ The next time you press the Talk button, the HFL begins from its main menu.

222

2009 Ridgeline ０８／０６／０２　２０：１４：０９　３１ＳＪＣ６３０　０２２８　

Setting Up the System The voice of the HFL can be set to male or female (U.S. models only). Also, the incoming notification can be set to a ring tone, a prompt, or no notification.

Tosetupthesystem,dothis: 1.

Press and release the Talk button. After the beep, say ‘‘System.’’ The HFL response is, ‘‘System options are setup and clear.’’

2.

Press and release the Talk button. After the beep, say ‘‘Setup.’’ The HFL response is ‘‘Would you like male or female prompts?’’

3.

4.

Press and release the Talk button. After the beep, say ‘‘Male’’ or ‘‘Female,’’ depending on the system voice you want. The HFL response is, ‘‘Male (Female) prompts have been selected. Would you like an audible notification of an incoming call?’’

Press and release the Talk button. If you say ‘‘Yes’’ after the beep, the HFL response is, ‘‘Would you like the notification to be a ring tone or prompt?’’ If you say ‘‘No’’ after the beep, the HFL returns to its main menu. Saying ‘‘No’’ will result in no ring tone or prompt playback during an incoming call. The audio system will still mute, and a message will be displayed.

Bluetooth HandsFreeLink

5.

6.

Press and release the Talk button. After the beep, say ‘‘Ring tone’’ or ‘‘Prompt.’’ The HFL response is ‘‘A ring tone will be used’’ or ‘‘An incoming call prompt will be used.’’ If you choose ‘‘Ring tone,’’ you will hear a ring tone through the audio speakers to announce an incoming call. If you choose ‘‘Prompt,’’ you will hear this message to announce an incoming call: ‘‘You have an incoming call.’’

The HFL response continues ‘‘A security option is available to lock the HFL system. Each time the vehicle is turned on, a passcode would be required to use this system. Would you like this security option turned on?’’ If you say ‘‘Yes,’’ you can set your passcode. Refer to the setting procedure in the next column.

223

2009 Ridgeline ０８／０６／０２　２０：１４：２１　３１ＳＪＣ６３０　０２２９　

Bluetooth HandsFreeLink

Setting Your Passcode The HFL will accept a numeric, four- digit passcode that you can use for security purposes.

Tosetyourpasscode,dothis: Follow the system setup 1. procedure as described previously.

2.

Press and release the Talk button. After the beep, say ‘‘Yes.’’

3.

4.

The HFL response is ‘‘What is the four-digit number you would like to set as your passcode?’’

Press and release the Talk button. After the beep, say the four-digit passcode you want to use. For example, say ‘‘1, 2, 3, 4.’’ The HFL response is ‘‘1, 2, 3, 4. Is this correct?’’

224

5.

Press and release the Talk button. After the beep, say ‘‘Yes.’’ The HFL response is ‘‘Security is on. Each time the vehicle is turned on, the passcode will be required to use the system. The system setup is complete. Returning to the main menu.’’

6.

Press and release the Talk button. If you say ‘‘No.’’ after the beep, the HFL response is ‘‘Security will not be used. The system setup is complete.’’

Toenteryourpasscode,dothis; Once a passcode is set, you can lock the HFL so it only operates after the passcode is entered.

1.

The HFL will prompt you for your passcode each time the ignition switch is turned to the ON (II) position and you press the Talk button. You will only be asked for the passcode once per ignition

2.

3.

cycle. If the passcode is set, its response is ‘‘The system is locked. What is the four-digit passcode?’’

Press and release the Talk button. After the beep, say your four-digit passcode. For example, say ‘‘1, 2, 3, 4.’’

If the passcode is correct, the HFL response is ‘‘Main menu.’’ If the passcode is not correct, the HFL response is ‘‘1, 2, 3, 4 is incorrect. Please try again.’’ Go back to the step 2.

If you forget your passcode and you cannot activate the HFL, consult your dealer to cancel the passcode.

2009 Ridgeline ０８／０６／０２　２０：１４：３１　３１ＳＪＣ６３０　０２３０　

Pairing Your Phone Your Bluetooth compatible phone with Hands Free Profile must be paired to the HFL before you can make and receive hands-free calls. To confirm that your phone is Bluetooth compatible, visit handsfreelink.honda.com 528-7876. In Canada, call (888) 9- HONDA-9. Your phone retailer should also be able to confirm that your phone is Bluetooth compatible.

, or call (888)

NOTE:

HFL does not allow you to pair your phone if the vehicle is moving. For pairing, your phone must be in its Discovery mode. Up to six phones can be paired to the HFL. The following procedure works for most phones. If you cannot pair your phone to the HFL with this procedure, refer to your phone’s operating manual, visit

, call the

handsfreelink.honda.com Hands Free Link consumer support at (888) 528-7876, or call your phone retailer. In Canada, call (888) 9-HONDA-9. During the pairing process, turn off any previously paired phones before pairing a new phone.

1.

2.

With your phone on and the ignition in the ACCESSORY (I) or ON (II) position, press and release the Talk button. After the beep, say ‘‘Phone setup.’’ The HFL response is ‘‘Phone setup options are status, pair, edit, delete, and list.’’

Press and release the Talk button. After the beep, say ‘‘Pair.’’ The HFL response is ‘‘The pairing process requires operation of your mobile phone. For safety, only perform this function while the vehicle is stopped. State a four- digit code for pairing. Note this

Bluetooth HandsFreeLink

code. It will be requested by the phone.’’

3.

4.

Press and release the Talk button. After the beep, say the four-digit code you want to use. For example, say ‘‘1, 2, 3, 4.’’ The HFL response is, ‘‘1, 2, 3, 4. Is this correct?’’

Press and release the Talk button. After the beep, say ‘‘Yes.’’ The HFL response is ‘‘HFL is now searching for a Bluetooth phone. Make sure the phone you are trying to pair is in discovery mode.’’

Steps 5 and 6 show a

NOTE: common way to get your phone into its Discovery mode. If these steps do not work on your phone, refer to the phone’s operating manual.

CONTINUED

225

2009 Ridgeline ０８／０６／０２　２０：１４：４１　３１ＳＪＣ６３０　０２３１　

Bluetooth HandsFreeLink

Follow the prompts on your phone to get it into its Discovery mode. The phone will search for the HFL. When it comes up, select HandsFreeLink from the list of options displayed on your phone.

Torenameapairedphone,dothis: 1.

Press and release the Talk button. After the beep, say ‘‘Phone setup.’’ The HFL response is ‘‘Phone setup options are status, pair, edit, delete, and list.’’

Todeleteapairedphone,dothis: 1.

Press and release the Talk button. After the beep, say ‘‘Phone setup.’’ The HFL response is, ‘‘Phone setup options are status, pair, edit, delete, and list.’’

5.

6.

7.

When asked by the phone, enter the four-digit code from step 3 into your phone. The HFL response is ‘‘A new phone has been found. What would you like to name this phone?’’

Press and release the Talk button. After the beep, say the name you want to use. For example, say ‘‘Eric’s phone.’’ The HFL response is ‘‘Eric’s phone has been successfully paired. Returning to the main menu.’’

8.

If you want to pair another phone, repeat steps 1 through 7.

226

2.

3.

Press and release the Talk button. After the beep, say ‘‘Delete.’’ The HFL response is, ‘‘Which phone would you like to delete?’’

Press and release the Talk button. After the beep, say the name of the phone you want to delete. For example say ‘‘Eric’s phone.’’ The HFL response is ‘‘Would you like to delete Eric’s phone?’’

2.

3.

4.

Press and release the Talk button. After the beep, say ‘‘Edit.’’ The HFL response is ‘‘Which phone would you like to edit?’’

Press and release the Talk button. After the beep, say the name of the phone you want to rename. For example, say ‘‘Eric’s phone.’’ The HFL response is ‘‘What is the new name for Eric’s phone?’’

Press and release the Talk button. After the beep, say the new name of the phone. For example, say ‘‘Lisa’s phone.’’ The HFL response is, ‘‘The name has been changed. Returning to the main menu.’’

2009 Ridgeline ０８／０６／０２　２０：１４：５０　３１ＳＪＣ６３０　０２３２　

4.

5.

Press and release the Talk button. After the beep, say ‘‘Yes.’’ The HFL response is ‘‘Preparing to delete Eric’s phone. Say OK to continue, otherwise, say Go back, or Cancel.’’

Press and release the Talk button. If you say ‘‘OK’’ after the beep, the HFL response is ‘‘The phone has been deleted. Returning to the main menu.’’ If you say ‘‘Go back,’’ or ‘‘Cancel,’’ the phone will not be deleted.

Tolistallpairedphones,dothis: 1.

Press and release the Talk button. After the beep, say ‘‘Phone setup.’’ The HFL response is, ‘‘Phone setup options are status, pair, edit, delete, and list.’’

2.

Press and release the Talk button. After the beep, say ‘‘List.’’ The HFL responds by listing the name of each paired phone. When all

phones paired to the system have been read, the HFL response is ‘‘The entire list has been read. Returning to the main menu.’’

Tofindoutthestatusofthephonebeing used,dothis: 1.

Press and release the Talk button. After the beep, say ‘‘Phone setup.’’ The HFL response is ‘‘Phone setup options are status, pair, edit, delete, and list.’’

2.

Press and release the Talk button. After the beep, say ‘‘Status.’’ An example of the HFL response is, ‘‘Eric’s phone is linked. Battery strength is three bars. Signal strength is five bars, and the phone is roaming. Returning to the main menu.’’

Bluetooth HandsFreeLink

Tochangefromthecurrentlylinked phonetoanotherpairedphone,dothis: Press and release the Talk button. 1. After the beep, say ‘‘Next phone.’’ The HFL response is ‘‘Searching for the next phone.’’ The HFL then disconnects the linked phone and searches for another paired phone. If no other phones are found, the first phone remains linked.

227

2009 Ridgeline ０８／０６／０２　２０：１４：５９　３１ＳＪＣ６３０　０２３３　

2.

Press and release the Talk button. After the beep, say the number you want to call. For example, say ‘‘123 456 7891.’’ The HFL response is ‘‘123 456 7891. Say call, dial, or continue to add numbers.’’

You can also make a call directly from the list shown on the navigation display.

For more information on how to make a call, see page

231

3.

Press and release the Talk button. After the beep, say ‘‘Call’’ or ‘‘Dial.’’ The HFL response is ‘‘Calling’’ or ‘‘Dialing.’’ Once connected, you will hear the person you called through the audio speakers. To change the volume, use the audio system volume knob, or the steering wheel volume controls.

4.

To end the call, press the Back button.

Bluetooth HandsFreeLink

Making a Call You can make calls using any phone number, or by using a name in the HFL phonebook. You can also redial the last number called. During a call, the HFL allows you to talk up to 30
minutes after you remove the key from the ignition switch. Continuing a call without running the engine may discharge and weaken the vehicle’s battery.

Tomakeacallusingaphonenumber, dothis: 1.

With your phone on and the ignition in the ACCESSORY (I) or ON (II) position, press and release the Talk button. After the beep, say ‘‘Call’’ or ‘‘Dial.’’ The HFL response is, ‘‘What name or number would you like to call/ dial?’’

228

2009 Ridgeline ０８／０６／０２　２０：１５：０８　３１ＳＪＣ６３０　０２３４　

TomakeacallusinganameintheHFL phonebook,dothis: 1.

With your phone on and the ignition in the ACCESSORY (I) or ON (II) position, press and release the Talk button. After the beep, say ‘‘Call’’ or ‘‘Dial.’’ The HFL response is, ‘‘What name or number would you like to call/ dial?’’

2.

3.

Press and release the Talk button. After the beep, say the name you want to call. For example, say ‘‘Eric.’’ The HFL response is ‘‘Would you like to call Eric?’’

Press and release the Talk button. After the beep, say ‘‘Yes.’’ The HFL response is ‘‘Calling’’ or ‘‘Dialing.’’ Once connected, you will hear the person you called through the audio speakers. To change the volume, use the audio system volume knob, or the steering wheel volume controls.

4.

To end the call, press the Back button.

To redial the last number called by the phone, press and release the Talk button. After the beep, say ‘‘Redial.’’ The HFL response is, ‘‘Redialing.’’ Once connected, you will hear the person you called through the audio speakers. To change the volume, use the audio system volume knob, or the steering wheel volume controls.

Bluetooth HandsFreeLink

Sending Numbers or Names During a Call The HFL allows you to send numbers or names during a call. This is useful when you call a menu- driven phone system. You can also program account numbers into the HFL phonebook for easy retrieval during menu-driven calls.

Tosendanumberduringacall,dothis: Press and release the Talk button. 1. After the beep, say ‘‘Send.’’ The HFL response is, ‘‘What name or number would you like to send?’’

2.

Press and release the Talk button. After the beep, say the number you want to send. For example, say ‘‘1, 2, 3.’’ The HFL response is ‘‘1, 2, 3. Say send, or continue to add numbers.’’

To send a pound (

NOTE: ‘‘pound.’’ To send a star (*), say ‘‘star.’’ CONTINUED

), say

＃

229

2009 Ridgeline ０８／０６／０２　２０：１５：１９　３１ＳＪＣ６３０　０２３５　

Bluetooth HandsFreeLink

3.

Press and release the Talk button. After the beep, say ‘‘Send.’’ The dial tones will be sent, and the call will continue.

Tosendanameduringacall,dothis: 1.

Press and release the Talk button. After the beep, say ‘‘Send.’’ The HFL response is, ‘‘What name or number would you like to send?’’

2.

Press and release the Talk button. After the beep, say the name you want to send. For example, say ‘‘Account number.’’ The HFL response is ‘‘Would you like to send account number?’’

3.

Press and release the Talk button. After the beep, say ‘‘Yes.’’ The dial tones will be sent, and the call will continue.

Receiving a Call If you receive a call when you are not on the phone, the HFL interrupts the audio system (if it is on), and plays the incoming call notification, if activated. To answer the call, press the Talk button and begin speaking. If you don’t want to answer the call, press the Back button.

If your phone has Call Waiting, and you receive a call when you are on the phone, press and release the Talk button to answer it. When you do this, the original call is placed on hold. To return to the original call, press the Talk button again. If you don’t want to answer the new call, disregard it, and continue with your original call. If you want to hang up the original call and answer the new call, press the Back button.

Transferring a Call During a call, you can transfer it from the HFL to your phone, or from your phone to the HFL.

TotransferacallfromtheHFLtoyour phone,dothis: Press and release the Talk button. After the beep, say ‘‘Transfer.’’ The audio switches from the HFL to the phone.

Totransferacallfromyourphonetothe HFL,dothis: Press and release the Talk button. After the beep, say ‘‘Transfer.’’ The audio switches from your phone to the HFL.

230

2009 Ridgeline ０８／０６／０２　２０：１５：３０　３１ＳＪＣ６３０　０２３６　

Bluetooth HandsFreeLink

Muting a Call During a call, you can mute or unmute your voice to the person you are talking to.

Tomuteyourvoice,dothis: 1.

Press and release the Talk button. After the beep, say ‘‘Mute.’’ The HFL response is, ‘‘Mute is active.’’

Tounmuteyourvoice,dothis: 2.

Press and release the Talk button. After the beep, say ‘‘Mute.’’ The HFL response is, ‘‘Mute is canceled.’’

Setting up the Phonebook The HFL phonebook can store up to 50 names with their associated numbers. These can be any types of numbers. For example, you can store a phone number and use it to make a call, or you can store an account number and use it during a call to a menu-driven phone system.

3.

4.

Toaddaname,dothis: 1.

Press and release the Talk button. After the beep, say ‘‘Phonebook.’’ The HFL response is ‘‘Phonebook options are store, edit, delete, receive contact, and list.’’

2.

Press and release the Talk button. After the beep, say ‘‘Store.’’ The HFL response is, ‘‘What name would you like to store?’’

Press and release the Talk button. After the beep, say the name you would like to store. For example, say ‘‘Eric’’ or say ‘‘account number.’’ The HFL response is ‘‘What is the number for Eric,’’ or ‘‘What is the number for account number?’’

Press and release the Talk button. After the beep, say the number. For example, say ‘‘123 456 7891.’’ The HFL response is ‘‘123 456
7891. Say enter, or continue to add numbers.’’

5.

Press and release the Talk button. After the beep, say ‘‘Enter.’’ The HFL response is ‘‘Eric (or account number) has been stored. Returning to the main menu.’’

CONTINUED

231

2009 Ridgeline ０８／０６／０２　２０：１５：４１　３１ＳＪＣ６３０　０２３７　

Bluetooth HandsFreeLink

Toeditthenumberofaname,dothis: Press and release the Talk button. 1. After the beep, say ‘‘Phonebook.’’ The HFL response is ‘‘Phonebook options are store, edit, delete, receive contact, and list.’’

2.

3.

4.

Press and release the Talk button. After the beep, say ‘‘Edit.’’ The HFL response is, ‘‘What name would you like to edit?’’

Press and release the Talk button. After the beep, say the name you would like to edit. For example, say ‘‘Eric.’’ The HFL response is ‘‘What is the new number for Eric?’’

Press and release the Talk button. After the beep, say the new number for Eric. For example, say ‘‘987 654 3219.’’ The HFL response is, ‘‘987 654 3219.’’ Say ‘‘Enter.’’ or continue to add numbers.

232

5.

Press and release the Talk button. After the beep, say ‘‘Enter.’’ The HFL response is ‘‘The number has been changed. Returning to the main menu.’’

4.

Press and release the Talk button. After the beep, say ‘‘Yes.’’ The HFL response is, ‘‘The name has been deleted. Returning to the main menu.’’

Todeleteaname,dothis: 1.

Press and release the Talk button. After the beep, say ‘‘Phonebook.’’ The HFL response is, ‘‘The Phonebook options are store, edit, delete, receive contact, and list.’’

2.

3.

Press and release the Talk button. After the beep, say ‘‘Delete.’’ The HFL response is, ‘‘What name would you like to delete?’’

Press and release the Talk button. After the beep, say the name you would like to delete. For example, say ‘‘Eric.’’ The HFL response is ‘‘Would you like to delete Eric?’’

Tolistallnamesinthephonebook,do this: 1.

Press and release the Talk button. After the beep, say ‘‘Phonebook.’’ The HFL response is ‘‘Phonebook options are store, edit, delete, receive contact, and list.’’

2.

Press and release the Talk button. After the beep, say ‘‘List.’’ The HFL responds by listing the names in the phonebook in the order which they were stored. When the end of the list is reached, the HFL response is, ‘‘The entire list has been read. Returning to the main menu.’’

2009 Ridgeline ０８／０６／０２　２０：１５：５０　３１ＳＪＣ６３０　０２３８　

Bluetooth HandsFreeLink

Tocallanamefromthephonebooklist, dothis: 1.

Press and release the Talk button. After the beep, say ‘‘Phonebook.’’ The HFL response is ‘‘Phonebook options are store, edit, delete, receive contact, and list.’’

2.

3.

Press and release the Talk button. After the beep, say ‘‘List.’’ The HFL responds by listing the names in the phonebook. When it says the name you want to call, for example, Eric, press the Talk button, and then say ‘‘Call.’’ The HFL response is, ‘‘Would you like to call Eric?’’

Press and release the Talk button. After the beep, say ‘‘Yes.’’ The HFL response is ‘‘Calling.’’ Once connected, you will hear the person you called through the audio speakers. To change the volume, use the audio system volume knob, or the steering

wheel volume controls.

list.’’

Storing a Phone Number Directly from Your Phone You can store the desired number to the HFL phonebook directly from your cell phone.

Your phone may not have NOTE: this capability. Visit handsfreelink. , or call the Hands Free honda.com Link consumer support at (888) 528-7876. In Canada, call (888) 9- HONDA-9. You can see your phone’s owner’s manual for information.

Tostoreaphonenumberfromyour phone: 1.

With your phone on and the ignition switch in the ACCESSORY (I) or ON (II) position, press and release the Talk button. After the beep, say ‘‘Phonebook.’’ The HFL response is, ‘‘Phonebook options are store, edit, delete, receive contact and

2.

3.

Press and release the Talk button. After the beep, say ‘‘Receive contact.’’ The HFL response is, ‘‘The receive process requires operation of your mobile phone. For safety, only perform this function while the vehicle is stopped. HFL is now waiting to receive a contact from a Bluetooth device.’’

Select a desired number from the list on your phone, and transmit/ send (individual steps will vary for each type of phone, refer to your phone’s owner’s manual) via Bluetooth. The HFL response is ‘‘One phone number has been received for this contact. What name would you like to store for the mobile number? To discard this number, say ‘Discard.’ ’’

CONTINUED

233

2009 Ridgeline ０８／０６／０２　２０：１５：５７　３１ＳＪＣ６３０　０２３９　

Bluetooth HandsFreeLink

4.

5.

Press and release the Talk button. After the beep, say the name you would like to store. For example, say ‘‘Neil at work.’’ The HFL response is, ‘‘Neil at work will be stored. Is this correct?’’

Press and release the Talk button. After the beep, say either ‘‘Yes’’ or ‘‘No.’’ The HFL response is, ‘‘Neil at work has been stored. If more than one number was received for the contact entry, the HFL asks for the name of the next number. If only one number is received, or all numbers have been stored, the HFL response is, ‘‘Would you like HFL to receive another contact?’’

234

6.

7.

If you want to continue to store any other numbers, press and release the Talk button. After the beep, say ‘‘Yes.’’ The HFL response is, ‘‘HFL is now waiting to receive a contact from a Bluetooth device.’’

Select a desired number from the list on your phone, and transmit/ send (individual steps will vary for each type of phone, refer to your phone’s owner’s manual) via Bluetooth. The HFL response is ‘‘One phone number has been received for this contact. What name would you like to store for the mobile number? To discard this number, say ‘Discard.’ ’’

8.

9.

Press and release the Talk button. After the beep, say the name you would like to store. For example, say ‘‘Susan at work.’’ The HFL response is, ‘‘Susan at work will be stored. Is this correct?’’

Press and release the Talk button. After the beep, say either ‘‘Yes’’ or ‘‘No.’’ The HFL response is ‘‘Susan at work has been stored. Would you like HFL to receive another contact?’’

10.

If you do not want to continue to store any other numbers, press and release the Talk button. After the beep, say ‘‘No.’’ The HFL response is ‘‘Returning to the main menu.’’

2009 Ridgeline ０８／０６／０２　２０：１６：０５　３１ＳＪＣ６３０　０２４０　

Cellular Phonebook Options The cellular phonebook option allows you to store up to 1,000 names and 10,000 phone numbers in the phonebook of Bluetooth HandsFreeLink from your cellular phonebook. The maximum names and numbers to be stored varies on the data size. With the HFL, you can then automatically dial any name or number in the phonebook.

Your phone may not have NOTE: this capability. Visit handsfreelink. , or call the Hands Free honda.com Link consumer support at (888) 528-7876. In Canada, call (888) 9- HONDA-9. You can see your phone’s owner’s manual for information.

To use the cellular phonebook with the HFL, say or select ‘‘Cellular