The XM® satellites are in orbit over the equator, therefore, objects south of the vehicle may cause satellite reception interruptions. Satellite signals are more likely to be blocked by tall buildings and mountains the farther north you travel from the equator.
You may experience reception problems under the following circumstances: • In a location with an obstruction to the south of
your vehicle.
• In tunnels • On the lower level of a multi-tiered road • Large items carried on the roof rack
* Not available on all models
QRG
TOC
Index
Home
237
2012 Odyssey12 US ODYSSEY-31TK8610.book 238 ページ 2011年6月21日 火曜日 午前9時35分
uuGeneral Information on the Audio SystemuRecommended CDs
QRG
Recommended CDs • Use only high-quality CD-R or CD-RW discs labeled for audio use.
• Use only CD-R or CD-RW discs on which the recordings are closed.
• Play only standard round-shaped CDs.
The CD packages or jackets should have one of these marks.
TOC
■ CDs with MP3, WMA or AAC files • Some software files may not allow for audio play or text data display.
• Some versions of MP3, WMA or AAC formats may be unsupported.
1Recommended CDs
A Dual-disc cannot play on this audio unit. If recorded under certain conditions, a CD-R or CD-RW may not play either.
Index
Home
238
2012 Odyssey12 US ODYSSEY-31TK8610.book 239 ページ 2011年6月21日 火曜日 午前9時35分
uuGeneral Information on the Audio System uRecommended CDs
■ Protecting CDs Follow these precautions when handling or storing CDs: • Store a CD in its case when it is not being played.
• When wiping a CD, use a soft clean cloth from the center to the outside edge.
• Handle a CD by its edge. Never touch either surface.
• Never insert foreign objects into the CD player.
• Keep CDs out of direct sunlight and extreme heat.
• Do not place stabilizer rings or labels on the CD.
• Avoid fingerprints, liquids, and felt-tip pens on the CD.
1Protecting CDs
NOTICE Do not insert a damaged CD. It may be stuck inside and damage the audio unit.
Examples: ● Bubbled, wrinkled, labeled, and
excessively thick CDs
Bubbled/ Wrinkled
With Label/ Sticker
Using Printer Label Kit
Sealed With Plastic Ring
● Damaged CDs
● Poor quality
CDs
Warped
Burrs
Chipped/ Cracked ● Small CDs
3-inch (8-cm) CD
QRG
TOC
Index
Home
239
2012 Odyssey12 US ODYSSEY-31TK8610.book 240 ページ 2011年6月21日 火曜日 午前9時35分
uuGeneral Information on the Audio SystemuCompatible iPod®* and USB Flash Drives*
QRG
Compatible iPod®* and USB Flash Drives* ■ iPod® Model Compatibility
Model
iPod classic ® 80/160G
iPod classic ® 120G
iPod classic ® 160G (launch in 2009)
iPod ® (5th generation)
iPod nano ® iPod touch ®
1iPod® Model Compatibility
This system may not work with all software versions of these devices.
TOC
■ USB Flash Drives • Use a recommended USB flash drive of 256 MB or higher.
• Some digital audio players may not be compatible.
1USB Flash Drives
Files on the USB flash drive are played in their stored order. This order may be different from the order displayed on your PC or device.
• Some USB flash drives (e.g., a device with security lockout) may not work.
• Some software files may not allow for audio play or text data display.
• Some versions of MP3, WMA, or AAC formats may be unsupported.
Index
Home
240
* Not available on all models
2012 Odyssey12 US ODYSSEY-31TK8610.book 241 ページ 2011年6月21日 火曜日 午前9時35分
Rear Entertainment System *
Models with navigation system For models with the navigation system, see the Navigation System Manual for how to operate the rear entertainment system. Models without navigation system Allows the rear passengers to enjoy a different entertainment source, such as DVD, CD, CD Library, and radio, than the front passengers.
1Rear Entertainment System
NOTICE This vehicle’s overhead mounted video display, if so equipped, includes mercury-containing components. Upon removal, please reuse, recycle, or dispose of as hazardous waste.
■ Wireless Headphones The rear seat passengers can listen to audio from the rear entertainment system by a wireless headphone that comes with your vehicle.
To turn on the switch: Pivot the left earpiece outward.
To adjust the volume: Turn the dial at the bottom of the right earpiece.
* Not available on all models
Continued
Auxiliary Input Jacks
The system also allows for auxiliary inputs from standard video games. The jacks are above the third row seat armrest on the driver’s side. V = Video jack L = Left audio jack R = Right audio jack
1Wireless Headphone
Your vehicle comes with two wireless headphones.
Wear the headphone correctly with the earpiece marked with L goes to your left ear and R goes to your right ear. Wearing the headphone backward may affect the audio reception.
QRG
TOC
Index
Home
241
2012 Odyssey12 US ODYSSEY-31TK8610.book 242 ページ 2011年6月21日 火曜日 午前9時35分
uuRear Entertainment System *uOperating the System
QRG
■ Overhead Screen
Pull down the screen to the first or second detent until it latches.
Overhead Screen
TOC
Index
Home
242
Operating the System To operate the system, turn the ignition switch to ON (w or ACCESSORY (q. Press the REAR POWER Button
button to turn on the system (indicator on).
REAR SOURCE Button
button on the front panel
■ When you press the button (indicator on), the beeper sounds three times, and the front display changes to what is displayed on the rear overhead screen.
The audio from the front speakers switches to the audio played in the rear.
* Not available on all models
1 Overhead Screen
NOTICE This vehicle’s overhead mounted video display, if so equipped, includes mercury-containing components. Upon removal, please reuse, recycle, or dispose of as hazardous waste.
You can use the rear control panel as a remote. Press the lock tab to detach it.
1 Operation the System
If you do not operate the system from the front panel for more than 20 seconds, the indicator in the
button goes off, and the front display returns to what has previously been displayed.
2012 Odyssey12 US ODYSSEY-31TK8610.book 243 ページ 2011年6月21日 火曜日 午前9時35分
uuRear Entertainment System *uOperating the System
■ System Controls and Menus for DVD
(Power) Button
Press to turn on the system.
DVD Button Press to watch a DVD.
MENU Button The following options appear when you play a DVD and press the MENU button: Top Menu Menu Play Mode
Audio Subtitle Angle Title Chapter NumInput
Search/NumInput
Repeat Pause/Play Stop Return
QRG
TOC
(Light) Button Press to illuminate the buttons and bars for a few seconds. SKIP Bar Press change chapters.
to
or
(Play/Pause) Button
Press to pause or play a DVD.
TITLE/SCROLL Button Press to display the status of the DVD that is currently playing.
* Not available on all models
CANCEL Button Press to go back to the previous display or operation.
Aspect Ratio ( P. 249)
SETUP Button The following options appear when you play a DVD and press the SETUP button: Disp Adjust ( P. 249)
Brightness Contrast Black Level Color Tint Normal Wide Zoom Full
PERSONAL SURROUND ( P. 249) Language ( P. 250)
, or
and ENTER Buttons to highlight
3, 4, Use 3, 4, a menu item, and press the ENTER Button to make a selection.
Index
Home
Continued
243
2012 Odyssey12 US ODYSSEY-31TK8610.book 244 ページ 2011年6月21日 火曜日 午前9時35分
uuRear Entertainment System *uOperating the System
QRG
TOC
Index
Home
244
■ Playing a DVD • Insert a DVD into the lower slot of the front audio unit.
u The system automatically starts the DVD.
• To fast forward, press and hold the
(SEEK/SKIP) bar, and to reverse, press and
hold the
bar on the front panel or the remote.
1Playing a DVD
DVD is available for the rear seat passenger only.
If you have turned off the Auto Play feature, press the
(play) button on the front panel or remote.
• To go to the next chapter, press the
current chapter, press the the
bar twice to go to the previous chapter.
bar, and to go to the beginning of the bar on the front panel or the remote. Quickly press
■ DVD setup from the front panel
Press the button on the front panel while a DVD is playing and display REAR MENU in front. Rotate to select DVD Setup, then press
Setting up Audio: 1. Rotate
to select Audio, then press
2. Rotate press
to select a language for audio that is available on the DVD, then
Setting up Subtitle: 1. Rotate
to select Subtitle, then press
2. Rotate
to select a subtitle language that is available on the DVD.
* Not available on all models
2012 Odyssey12 US ODYSSEY-31TK8610.book 245 ページ 2011年6月21日 火曜日 午前9時35分
uuRear Entertainment System *uOperating the System
Auto Play On: 1. Rotate 2. The check mark disappears, and the auto play feature turns off.
to select Auto Play On, then press
u With this feature off, the DVD does not automatically start playing when the
disc is inserted. Press
button to play.
Title/Chapter Search: 1. Rotate
to select Title Search or Chapter Search, then press
2. Rotate
to select a title or chapter number, then press
■ TITLE/SCROLL button on the remote Press the TITLE/SCROLL button while the DVD is playing to see the current status of title, chapter, elapsed time, angle, subtitle, audio, and sound characteristics.
1TITLE/SCROLL button on the remote
Press the TITLE/SCROLL button again to return.
■ MENU button on the remote
Press the MENU button while the DVD is playing to see the available options. Use the 3, 4, buttons to highlight the option and then press the ENTER button.
, and
* Not available on all models
Continued
QRG
TOC
Index
Home
245
2012 Odyssey12 US ODYSSEY-31TK8610.book 246 ページ 2011年6月21日 火曜日 午前9時35分
uuRear Entertainment System *uOperating the System
QRG
Top Menu: The top page of the DVD’s title menu appears. The title menu also appears when you press the MENU button while the DVD is in the slot not playing. Press the CANCEL or MENU button to return.
Menu: The DVD’s title menu appears.
Play Mode: You can change the following three settings:
TOC
Audio -
Select a language for audio that is available on the DVD. The sound characteristics (Dolby Digital, LPCM, MPEG Audio, dts, etc) of that audio is also displayed.
Subtitle - Select a subtitle that is available on the DVD. Angle -
Select a view angle that is available on the DVD. If the DVD currently playing does not carry multiple angles, only one option Angle 1 comes on. Press the CANCEL or MENU button to return.
When the DVD is not playing If you press the MENU button while the DVD is not playing, the option Play Mode changes to Initial Settings.
Index
Home
246
* Not available on all models
2012 Odyssey12 US ODYSSEY-31TK8610.book 247 ページ 2011年6月21日 火曜日 午前9時35分
Initial Settings: You can configure the initial Language, Dynamic Range, and Angle Mark settings before playing DVD.
Language Settings -
Select the language for the DVD’s displayed menus (Menu Language), the DVD’s audio (Audio Language), and the DVD’s subtitle (Subtitle Language).
1. Select the language setting.
2. Select the language from English, French, Spanish, Arabic, German, Italian,
Dutch, Chinese, Korean, Thai, Japanese, and other.
3. If you select other, you need to enter the four digit language code number to configure the language that is not listed. Select Yes to go to the number input screen. u To return to the language Setting screen, select No.
4. Press the ENTER button each time you input digit.
u If you want to delete a number, select DEL.
5. The cursor automatically goes to ENT after you input four digits. Press the ENTER
button to command.
Dynamic Range - Angle Mark -
The feature reduces the difference between the loud and quiet sound levels. Select ON or OFF. You can select whether to display the angle mark appearing in the upper right corner of the screen when you change the view angle while the DVD is playing. Select ON or OFF.
* Not available on all models
Continued
uuRear Entertainment System *uOperating the System
1MENU button on the remote
Initial Settings: The prior language varies by disc. You may not be able to configure your selected language setting.
QRG
TOC
Index
Home
247
2012 Odyssey12 US ODYSSEY-31TK8610.book 248 ページ 2011年6月21日 火曜日 午前9時35分
uuRear Entertainment System *uOperating the System
QRG
TOC
Index
Home
248
Search: You can search for a DVD segment from the following methods.
Select the title you want to play.
Title Search - Chapter Search - Select the chapter you want to play. NumInput -
Enter a three digit number, if issued to the DVD, to find the segment you want to start to play.
1. Select NumInput to go to the number input screen.
2. Use the 3, 4,
, and
buttons to input numbers.
u If you want to delete a number, select DEL.
3. The cursor automatically goes to ENT after you input three digits. Press the ENTER
button to command.
Repeat: Highlight this option and press the ENTER button to change the repeat mode from chapter repeat and title repeat, to repeat off.
* Not available on all models
2012 Odyssey12 US ODYSSEY-31TK8610.book 249 ページ 2011年6月21日 火曜日 午前9時35分
uuRear Entertainment System *uOperating the System
■ SETUP button on the remote
Press the SETUP button while the DVD is playing to see the available options. Use the 3, 4, buttons to highlight the option and then press the ENTER button.
, and
Disp Adjust: You can adjust the overhead screen’s brightness, contrast, black level, color, and tint. To return to the default display setting, select Reset.
After you make all the adjustments, the screen goes back to the top SETUP screen, or press the CANCEL button to return.
Aspect Ratio: You can select the screen mode with a different aspect ratio from Normal, Wide, Zoom and Full. After you select the mode, it takes about one second to return to the play mode with the selected ratio.
Personal Surround: You can select the sound effect mode that fits the DVD’s audio source from Music, Cinema, and Voice. Select Off to turn this feature off.
* Not available on all models
Continued
QRG
TOC
Index
Home
249
2012 Odyssey12 US ODYSSEY-31TK8610.book 250 ページ 2011年6月21日 火曜日 午前9時35分
uuRear Entertainment System *uOperating the System
QRG
TOC
Index
Home
250
Language: You can select the display language from English, French, and Spanish. When the DVD is not playing You can select the audio language from English, French, and Spanish.
Appearance: You can select the screen color from white, black, blue, brown, and red.
* Not available on all models
2012 Odyssey12 US ODYSSEY-31TK8610.book 251 ページ 2011年6月21日 火曜日 午前9時35分
uuRear Entertainment System *uOperating the System
■ System Controls and Menus for Audio
(Power)
Button Press to turn on the system.
AUX Button Press to use a USB, iPod, auxiliary video (rear), or auxiliary audio (front).
CH/FLODER Bar
2 Audio System Basic Operation P. 202
CD/CDL Button Press to listen to a CD or CD library.
XM Button Press to listen to XM radio. MENU Button Press to display audio menu for AM/FM radio, XM radio, or CD on the overhead screen.
and ENTER Buttons
3,4, Use 3, 4, press the ENTER Button to make a selection.
to highlight a menu item, and
, or
QRG
TOC
SETUP Button
2 SETUP button on the remote P. 249
CANCEL Button Press to go back to the previous display or operation.
FM/AM Button Press to listen to AM or FM radio.
TITLE/SCROLL Button Press to switch search mode on XM radio, and scroll titles on CD.
(Light) Button
Press to illuminate the buttons and bars for a few seconds.
CATEGORY Bar
2 Audio System Basic Operation P. 202
(Play/Pause) Button
Press to pause a playing CD.
TUNE/SKIP Bar
2 Audio System Basic Operation P. 202
* Not available on all models
Index
Home
Continued
251
2012 Odyssey1System Controls and Menus for Audio
If you press the button on the front panel, you can operate the rear entertainment system from the front display.
button on the front panel P. 242
12 US ODYSSEY-31TK8610.book 252 ページ 2011年6月21日 火曜日 午前9時35分
uuRear Entertainment System *uOperating the System
QRG
■ Playing AM/FM radio in the rear Press the AM/FM button. When you press the MENU button while the radio is playing, the audio menu appears on the overhead screen. The available functions are the same as those of the front audio system. The TUNE/SKIP bar on the control panel works the same as the TUNE or SKIP bar on the front panel for AM/FM radio operation.
2 Playing the AM/FM Radio P. 205
■ Playing XM radio in the rear Press the XM button. When you press the MENU button while the radio is playing, the audio menu appears on the overhead screen. The available functions are the same as those of the front audio system. The TUNE/SKIP bar on the control panel works the same as the TUNE or SKIP bar on the front panel for XM radio operation.
2 Playing the XM® Radio P. 209
TOC
To change the mode between category and channel, press and hold the TITLE/ SCROLL button for five seconds.
Index
Home
252
* Not available on all models
2012 Odyssey12 US ODYSSEY-31TK8610.book 253 ページ 2011年6月21日 火曜日 午前9時35分
■ Playing a CD, and CD Library Press the CD/CDL button. The available options appear on the overhead screen are Repeat, Random, and Scan. These functions are the same as those of the front audio system.
2 Playing a CD P. 212
2 Playing CD Library P. 216
To scroll your audio data title, press the TITLE/SCROLL button for five seconds.
■ Playing iPod® and a USB flash drive Press the AUX button. The available options appear on the overhead screen are Repeat, Random, and Scan. These functions are the same as those of the front audio system.
2 Playing an iPod® P. 222
2 Playing a USB Flash Drive P. 226
To scroll your audio data title, press the TITLE/SCROLL button for five seconds.
uuRear Entertainment System *uOperating the System
1System Controls and Menus for Audio
If you press the button on the front panel, you can operate the rear entertainment system from the front display.
button on the front panel P. 242
You can also insert an audio CD compatible with the system, or recorded in MP3/WMA/AAC formats into the lower slot and play. The front passengers can listen to the same CD, or select another audio source.
2 Playable Discs P. 255
2 Audio Sources for Front and Rear Seats
P. 254
* Not available on all models
QRG
TOC
Index
Home
253
2012 Odyssey1Audio Sources for Front and Rear Seats
Yes: These audio sources are simultaneously playable. No: These audio sources are not simultaneously playable.
12 US ODYSSEY-31TK8610.book 254 ページ 2011年6月21日 火曜日 午前9時35分
uuRear Entertainment System *uAudio Sources for Front and Rear Seats
QRG
Audio Sources for Front and Rear Seats The table shows the possible audio source combinations of the front audio system and rear entertainment system’s simultaneous use.
Front AM/FM Radio
Rear
XM Radio
AM/FM Radio
XM Radio
CD
CD Library
DVD
USB iPod®
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
CD
Yes
Yes
Yes*2
Yes
Yes
Yes
CD
Library
DVD*1
USB iPod®
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
*1: The front seat passengers are only able to hear the DVD’s sound from the front
speakers.
*2:There are two cases. Two different CDs can be played, one for the front seats, and the other for the rear seats if the upper and lower slots are used. If only one slot is used, the front and rear seats can share the same audio source.
* Not available on all models
TOC
Index
Home
254
2012 Odyssey12 US ODYSSEY-31TK8610.book 255 ページ 2011年6月21日 火曜日 午前9時35分
Playable Discs
uuRear Entertainment System *uPlayable Discs
QRG
The discs that come with these labels can be played in your vehicle’s rear entertainment system.
Also look for the region code of 1 or ALL on the package or jacket on the disc.
DVD-ROMs are not playable in this unit.
1Playable Discs
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights.
Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision.
Manufactured under license under U.S. Patent’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS and DTS Digital Surround are registered trademarks and the DTS logos and Symbol are trademarks of DTS, Inc. All Rights Reserved. Reverse engineering or disassembly is prohibited.
TOC
Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, MLP Lossless and the double-D symbol are trademarks of Dolby Laboratories.
* Not available on all models
Index
Home
255
2012 Odyssey12 US ODYSSEY-31TK8610.book 256 ページ 2011年6月21日 火曜日 午前9時35分
uuRear Entertainment System *uDVD Player Error Messages
DVD Player Error Messages
QRG
Error Message
Cause
Solution
CHECK DISC
PUSH EJECT
FOCUS Error
Mechanical Error
Press the disc eject button, and remove the disc. Check for an error indication. Insert the disc again. If the code does not disappear or the disc cannot removed, consult a dealer.
CHECK REGION
Invalid region code
UNSUPPORTED FILE
DVD format not supported
The disc is not playable in this unit. Eject the disc, and insert a disc compatible with this system.
TOC
Index
Home
256
* Not available on all models
2012 Odyssey12 US ODYSSEY-31TK8610.book 257 ページ 2011年6月21日 火曜日 午前9時35分
HomeLink® Universal Transceiver *
The HomeLink® Universal Transceiver can be programmed to operate up to three remote controlled devices around your home, such as garage doors, lighting, or home security systems.
1HomeLink® Universal Transceiver
HomeLink® is a registered trademark of Johnson Controls., Inc.
■ Important Safety Precautions Refer to the safety information that comes with your garage door opener to test that the safety features are functioning properly. If you do not have the safety information, contact the manufacturer.
Before programming HomeLink to operate a garage door opener, confirm that the opener has an external entrapment protection system, such as an “electronic eye,” or other safety and reverse stop features. If it does not, HomeLink may not be able to operate it.
Before programming HomeLink, make sure that people and objects are out of the way of the garage or gate to prevent potential injury or damage. When programming a garage door opener, park just outside the garage door’s path.
Training HomeLink
Red Indicator
If you have not trained any of the buttons in HomeLink before, you should erase any previously learned codes. To do this: • Press and hold the two outside buttons for
about 20 seconds, until the red indicator blinks. Release the buttons, and proceed to step 1.
• If you are training the second or third
button, go directly to step 1.
* Not available on all models
Continued
QRG
TOC
Index
Home
257
2012 Odyssey12 US ODYSSEY-31TK8610.book 258 ページ 2011年6月21日 火曜日 午前9時35分
uuHomeLink® Universal Transceiver *uTraining HomeLink
QRG
■ Training a Button
1. Position the remote transmitter you wish to link 1 to 3 inches (3 - 8 cm) from the HomeLink button you want to program.
2. Press and hold the desired HomeLink button and the button on the remote transmitter. Does the HomeLink indicator (LED) blink after 10 secs?
YES
NO
NO
TOC
3. Press and hold the programmed HomeLink button for about a sec. Does the device (garage door opener) work?
YES
NO
YES
a. Press and hold the remote and the HomeLink button at the same time. Then, while continuing to hold the HomeLink button, press and release the button on the remote every 2 secs. Does the LED blink within 20 secs?
Training Complete
4. Press and hold the HomeLink button again.
HomeLink LED is on.
HomeLink indicator blinks for 2 secs, then remains on.
5. Press and hold the HomeLink button again. The remote-controlled device should operate.
Training Complete
* Not available on all models
Index
Home
258
a. The remote has a rolling code. Press the “learn” button on the remote-controlled device (e.g. garage door opener).
b. Within 30 secs, press and hold the programmed HomeLink button for 2 secs.
1 Training Button
Retraining a Button If you want to retrain a programmed button for a new device, you do not have to erase all button memory. You can replace the existing memory code using this procedure.
1. Press and hold the desired HomeLink button until the HomeLink indicator begins to blink.
Standard transmitter Indicator remains on for about 25 secs.
Rolling code transmitter Indicator blinks rapidly for two secs, then remains on for about 23 secs.
2. Continue to hold the HomeLink button and follow steps 1 - 3 under “Training a Button.”
Erasing Codes To erase all the codes, press and hold the two outside buttons until the HomeLink indicator begins to blink (about 10 to 20 secs). You should erase all codes before selling the vehicle.
If you have any problems, see the device’s instructions, visit www.homelink.com, or call HomeLink at (800) 355-3515.
2012 Odyssey12 US ODYSSEY-31TK8610.book 259 ページ 2011年6月21日 火曜日 午前9時35分
Bluetooth
® HandsFreeLink®*
Models with navigation system For models with the navigation system, see Navigation System Manual for how to operate the Bluetooth® HandsFreeLink®. Models without navigation system Bluetooth® HandsFreeLink® (HFL) allows you to place and receive phone calls using your vehicle's audio system, without handling your cell phone.
Using HFL ■ HFL Buttons
TALK Button Pick-up Button
Volume up
Hang-up Button Back Button
Volume down
Microphone
PHONE Button
Selector Knob
(Pick-up) button: Press to go directly to the Phone screen or to answer an
incoming call.
(Hang-up) button: Press to end a call. (TALK) button: Press to call a number with a stored voice tag. (Back) button: Press to cancel a command.
PHONE button: Press to go directly to the Phone screen. Selector knob: Rotate * Not available on all models
to select an item on the screen, then press
Continued
1Bluetooth® HandsFreeLink®
To use HFL, you need a Bluetooth-compatible cell phone. For a list of compatible phones, pairing procedures, and special feature capabilities: • U.S.: Visit www.handsfreelink.honda.com, or call
(888) 528-7876.
• Canada: Visit www.handsfreelink.ca, or call
(888) 528 -7876.
Voice control tips • Aim the vents away from the ceiling and close the windows, as noise coming from them may interfere with the microphone. • Press and release the
button when you want to
call a number using a stored voice tag. Speak clearly and naturally after a beep.
• If the microphone picks up voices other than yours,
the command may be misinterpreted.
• To change the volume level, use the audio system's volume knob or the remote audio controls on the steering wheel.
QRG
TOC
Index
Home
259
2012 Odyssey12 US ODYSSEY-31TK8610.book 260 ページ 2011年6月21日 火曜日 午前9時35分
uu Bluetooth
® HandsFreeLink®* uUsing HFL
The multi-information display notifies you when there is an incoming call.
1Bluetooth® HandsFreeLink®
Bluetooth® Wireless Technology Bluetooth® name and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Honda Motors Co., Ltd., is under license. Other trademarks and trade names are those of their respective owners.
HFL Limitations An incoming call on HFL will interrupt the audio system when it is playing. It will resume when the call is ended.
1HFL Status Display
The information that appears on the multi- information display varies between phone models.
You can change the system language to English, French, or Spanish.
2 Customized Features P. 101
QRG
■ HFL Status Display
Bluetooth Indicator Comes on when your phone is connected to HFL. Roam Status Signal Strength
HFL Mode
TOC
Index
Home
260
Call Name
Battery Level Status
* Not available on all models
2012 Odyssey12 US ODYSSEY-31TK8610.book 261 ページ 2011年6月21日 火曜日 午前9時35分
HFL Menus The ignition switch must be in ACCESSORY (q or ON (w to use HFL.
PHONE
or Phone
Speed Dial
Display your speed dial entry lists. (up to 20 entries per paired phone)
uu Bluetooth
® HandsFreeLink®* uHFL Menus
1HFL Menus
To use HFL, you must first pair your Bluetooth- compatible cell phone to the system while the vehicle is parked.
Call History*1
All Calls
Received Calls
Dialed Calls
Missed Calls
Phone Book*1
Alphabet Search
All Listings
Display the last 20 incoming, outgoing, or missed calls.
Display the last 20 incoming calls.
Display the last 20 outgoing calls.
Display the last 20 missed calls.
Display the menu for an alphabetical search in the paired phone’s phonebook.
Display the paired phone’s phonebook.
Dial
Enter a phone number to dial.
*1: Appears only when a phone is connected to HFL. * Not available on all models
Continued
QRG
TOC
Index
Home
261
2012 Odyssey12 US ODYSSEY-31TK8610.book 262 ページ 2011年6月21日 火曜日 午前9時35分
uu Bluetooth
® HandsFreeLink®* uHFL Menus
QRG
TOC
Index
Home
262
Redial
Redial the last number dialed in the phone’s history.
Phone Setup
Connection
Add New Phone
Pair a phone to the system.
Connect
Connect a phone to the system.
Disconnect
Disconnect a paired phone from the system.
Delete
Delete a previously paired phone.
Bluetooth PIN
Create a Bluetooth PIN number for a paired phone.
* Not available on all models
2012 Odyssey12 US ODYSSEY-31TK8610.book 263 ページ 2011年6月21日 火曜日 午前9時35分
uu Bluetooth
® HandsFreeLink®* uHFL Menus
Edit Speed Dial
Store Speed Dial
Select a number from the Call History, phonebook, or manual entry to store as a speed dial number.
Delete Speed Dial
Delete a previously stored speed dial number.
Store Voice Tag
Create a voice tag for a speed dial number.
Delete Voice Tag
Delete a voice tag for a speed dial number.
Security Code
Create a security code number for a paired phone.
QRG
TOC
Auto Answer
Set incoming calls to be automatically answered.
Auto Transfer
Set calls to automatically transfer from your phone to HFL when you enter the vehicle.
System Clear
Clear the system of all paired phones, phonebook entries, speed dials, and security codes.
Index
Home
Continued
263
* Not available on all models
2012 Odyssey12 US ODYSSEY-31TK8610.book 264 ページ 2011年6月21日 火曜日 午前9時35分
uu Bluetooth
® HandsFreeLink®* uHFL Menus
QRG
TOC
Index
Home
264
■ Phone Setup ■ To pair a cell phone (when there is no phone paired to the system)
1. Press the PHONE button or the
button.
2. Rotate
to select Yes, then press u HFL automatically searches for a
Bluetooth device.
3. When your phone appears on the list, select
it by pressing u If your phone doesn’t appear, select Phone Not Found? and search for Bluetooth devices using your phone. From your phone, select HandsFreeLink.
4. HFL gives you a four-digit pairing code to
input on your phone. When your phone prompts you, input the four-digit pairing code.
5. You will receive a notification on the screen
if pairing is successful.
* Not available on all models
1Phone Setup
Your Bluetooth-compatible phone must be paired to HFL before you can make and receive hands-free calls.
Phone Pairing Tips: • You cannot pair your phone while the vehicle is
moving.
• Your phone must be in the discoverable or search
mode when pairing the phone. Refer to your phone's manual.
• Up to six phones can be paired. • Your phone's battery may drain faster when it is
paired to HFL.
• If your phone is not ready for pairing or not found by the system within three minutes, the system will time out and returns to idle.
2012 Odyssey12 US ODYSSEY-31TK8610.book 265 ページ 2011年6月21日 火曜日 午前9時35分
uu Bluetooth
® HandsFreeLink®* uHFL Menus
■ To pair a cell phone (when a phone has already been paired to the system) button.
1. Press the PHONE button or the
2. Rotate
to select Phone Setup, then
press
3. Rotate
press
to select Connection, then
4. Rotate
to select Add New Phone, then
press u The screen changes to Add New Phone.
5. Rotate
to select Empty, then press
* Not available on all models
Continued
QRG
TOC
Index
Home
265
2012 Odyssey12 US ODYSSEY-31TK8610.book 266 ページ 2011年6月21日 火曜日 午前9時35分
uu Bluetooth
® HandsFreeLink®* uHFL Menus
QRG
TOC
Index
Home
266
* Not available on all models
6. Make sure your phone is in search or
discoverable mode, then press u HFL automatically searches for a
Bluetooth device.
7. When your phone appears on the list, select
it by pressing u If your phone doesn’t appear, select Phone Not Found? and search for Bluetooth devices using your phone. From your phone, select HandsFreeLink.
8. HFL gives you a four-digit pairing code to
input on your phone. When your phone prompts you, input the four-digit pairing code.
9. You will receive a notification on the screen
if pairing is successful.
2012 Odyssey12 US ODYSSEY-31TK8610.book 267 ページ 2011年6月21日 火曜日 午前9時35分
■ To change the Bluetooth PIN setting
1. Press the PHONE button or the
button. to select Phone Setup, then
u Rotate
press
to select Connection, then
uu Bluetooth
® HandsFreeLink®* uHFL Menus
1To change the pairing code setting
The default pairing code is 0000 until you change the setting.
To create your own, select Fixed, and delete the current code, then enter a new one.
to select Bluetooth PIN, then
For a randomly generated pairing code each time you pair a phone, select Random.
2. Rotate press
3. Rotate
press
4. Rotate
to select Fixed PIN or Random
PIN, then press
5. If you select Fixed PIN, enter a new
Bluetooth PIN. u Rotate Rotate delete.
to select, then press to select
, then press
to
* Not available on all models
Continued
QRG
TOC
Index
Home
267
2012 Odyssey12 US ODYSSEY-31TK8610.book 268 ページ 2011年6月21日 火曜日 午前9時35分
uu Bluetooth
® HandsFreeLink®* uHFL Menus
QRG
■ To delete a paired phone
1. Press the PHONE button or the
button.
2. Rotate
to select Phone Setup, then
press u Repeat the procedure to select
Connection, then Delete.
3. Rotate
to select a phone you want to
delete, then press
4. You will receive a confirmation message on
the screen. Rotate press u You will receive a notification on the
to select Yes, then
screen if it is successful.
* Not available on all models
TOC
Index
Home
268
2012 Odyssey12 US ODYSSEY-31TK8610.book 269 ページ 2011年6月21日 火曜日 午前9時35分
■ To Create a Security Code You can protect each of the six cell phones with a security PIN.
1. Press the PHONE button or the
button.
2. Rotate
to select Phone Setup, then
press u Repeat the procedure to select Security
Code.
3. Select a phone you want to add a security
code to. u Rotate
to select a phone you want to
add a security code to, then press
4. Enter a new four-digit number.
u Rotate Rotate delete.
to select, then press to select
, then press
to
If the phone name you selected is security code protected the speed dial list becomes
Speed Dial List When Security Code-Protected
* Not available on all models
Continued
uu Bluetooth
® HandsFreeLink®* uHFL Menus
1To Create a Security Code
In the phone is already security code protected, you need to enter the current security code before clearing the code or creating a new one.
QRG
TOC
Index
Home
269
2012 Odyssey12 US ODYSSEY-31TK8610.book 270 ページ 2011年6月21日 火曜日 午前9時35分
uu Bluetooth
® HandsFreeLink®* uHFL Menus
QRG
TOC
Index
Home
270
■ Automatic Answering You can choose when the HFL system automatically answers incoming calls.
1. Press the PHONE button or the
button.
2. Rotate
to select Phone Setup, then
press u Repeat the procedure to select Auto
Answer.
3. Rotate
to select a mode you want, then
press
■ Automatic Transferring If you get into the vehicle while you are on the phone, the call can be automatically transferred to HFL.
1. Press the PHONE button or the
button.
2. Rotate
to select Phone Setup, then
press u Repeat the procedure to select Auto
Transfer.
3. Press