display.
button. Either
CONTINUED
335
2011 Odyssey10/07/17 10:18:53 31TK8600_341
Playing the XM Radio (Models with navigation system)
2.
Use the tune, list, or scan function to tune to a desired channel.
In category mode, only channels within that category can be selected. In channel mode, all channels can be selected.
3.
Pick the preset button you want for that channel. Press and hold the preset button until you hear a beep. You can also pick the number with the interface dial. Select your desired number and press and hold ENTER on the interface selector.
4.
Repeat steps 2 and 3 to store the first six channels.
5.
Press the button or scroll up again. The other XM band will be shown. Store the next six channels using steps 2 and 3.
336
Once a channel is stored, press and release the proper preset button to tune to it.
XM Radio Display Messages
−
‘‘OFF AIR’’ currently selected is no longer broadcasting.
The channel
‘‘LOADING’’ audio or program information.
XM is loading the
−
−
The
‘‘UNAUTHORIZED’’
encryption code is being updated.
Wait until the encryption code is
fully updated. Channels 0 and 1
should still work normally.
−
The signal is
‘‘NO SIGNAL’’ currently too weak. Move the vehicle to an area away from tall buildings, and with an unobstructed view of the southern horizon.
‘‘NO INFO’’ channel has no artist or title information at this time.
The selected
−
‘‘CHECK ANTENNA’’ a problem with the XM antenna. Please consult your dealer.
−
There is
−
The selected
‘‘UNAVAILABLE’’ channel number does not exist, is not part of your subscription, or this channel has no artist or title information at this time.
2011 Odyssey10/07/17 10:19:02 31TK8600_342
The XM satellites are in orbit over the equator; therefore, objects south of the vehicle may cause satellite reception interruptions. To help compensate for this, ground-based repeaters are placed in major metropolitan areas. Satellite signals are more likely to be blocked by tall buildings and mountains the farther north you travel from the equator.
Depending on where you drive, you may experience reception problems. Interference can be caused by any of these conditions:
Driving on the north side of an east/west mountain road.
Driving on the north side of a large commercial truck on an east/west road.
Driving in tunnels.
Playing the XM Radio (Models with navigation system)
Signal may be blocked by mountains or large obstacles to the south.
Signal weaker in these areas.
SATELLITE
Driving on a road beside a vertical wall, steep cliff, or hill to the south of you.
Driving on the lower level of a multi-tiered road.
Driving on a single lane road alongside dense trees taller than 50 ft. (15 m) to the south of you.
GROUND REPEATER
When DPLII is turned on (see page
), sound coming from the rear
331
speakers may be distorted due to the
compression of the music being
broadcast. Turn DPLII off if this
happens.
CONTINUED
337
2011 Odyssey10/07/17 10:19:08 31TK8600_343
Playing the XM Radio (Models with navigation system)
There may be other geographic situations that could affect XM Radio reception.
AsrequiredbytheFCC: Changesormodificationsnotexpressly approvedbythepartyresponsiblefor compliancecouldvoidtheuser’s authoritytooperatetheequipment.
Receiving XM Radio Service If your XM Radio service has expired or you purchased your vehicle from a previous owner, you can listen to a sampling of the broadcasts available on XM Radio. With the ignition switch in the ACCESSORY (I) or the ON (II) position, push the power/ volume knob to turn on the audio system, and press the A variety of music types and styles will play.
button.
, or at
If you decide to purchase XM Radio service, contact XM Radio at www.xmradio.com 1-800-852-9696. In Canada, contact , or at XM Canada at 1-877-209-0079. You will need to give them your radio I.D. number and your credit card number. To get your radio I.D. number, turn the TUNE knob until ‘‘0’’ appears in the display. Your I.D. will appear in the display.
www.xmradio.ca
338
After you have registered with XM
Radio, keep your audio system in the
XM Radio mode while you wait for
activation. This should take about 30
minutes.
While waiting for activation, make
sure your vehicle remains in an open
area with good reception. XM Radio
will continue to send an activation
signal to your vehicle for at least 12
hours from the activation request. If
the service has not been activated
after 36 hours, contact XM Radio.
In Canada, contact XM CANADA .
2011 Odyssey10/07/17 10:19:18 31TK8600_344
Playing a Disc (Models with navigation system)
AUDIO SCREEN
CENTER DISPLAY
Withoutrearentertainmentsystem CD BUTTON DISC SLOT
TITLE BUTTON POWER/ VOLUME KNOB
SKIP BAR
AUDIO BUTTON
Withrearentertainmentsystem CD BUTTON DISC SLOT TITLE BUTTON POWER/ VOLUME KNOB
SKIP BAR
AUDIO BUTTON
DISC SLOT
EJECT BUTTON TUNE KNOB
CATEGORY BAR SCAN BUTTON
INTERFACE DIAL
DISC SLOT
EJECT BUTTON
TUNE KNOB
CATEGORY BAR SCAN BUTTON
INTERFACE DIAL
CONTINUED
339
2011 Odyssey10/07/17 10:19:28 31TK8600_345
Playing a Disc (Models with navigation system)
The disc packages or jackets should have one of these marks.
To load or play a disc, the ignition switch must be in the ACCESSORY (I) or ON (II) position.
The disc player can play these disc formats:
CD (CD-DA, CD-TEXT) CD-R/RW MP3/WMA
The disc player can also play CD-Rs and CD-RWs compressed in MP3, WMA or AAC formats.
NOTE: If a file on WMA or AAC disc is protected by digital rights management (DRM), the audio system skips to the next file.
Video CDs and DVD discs will not work in this unit.
Some CD-DA and CD-ROM mixed discs are not playable.
340
2011 Odyssey10/07/17 10:19:33 31TK8600_346
Playing a Disc (Models with navigation system)
You cannot load and play 3-inch (8-cm) discs in this system.
Do not use discs with adhesive labels. The label can curl up and cause the disc to jam in the unit.
To Load a Disc Insert a disc about halfway into the disc slot. The drive will pull the disc in the rest of the way to play it. You operate the disc player with the same controls used for the radio. The number of the current track is shown in the display. When playing a disc in MP3, WMA or AAC, the numbers of the current folder and file are shown. The system will continuously play a disc until you change modes.
For information on how to handle and protect compact discs, see page
352
341
2011 Odyssey10/07/17 10:19:37 31TK8600_347
Playing a Disc (Models with navigation system)
To Play a Disc Select the disc player by pressing the CD button. The system will begin playing the last selected track in the disc. You will see the current track position highlighted.
Title information will be displayed by a list when the information is found in the Gracenote Album Info (Gracenote Media Database) on the built-in hard disk drive. When you play a CD recorded with text data, you will see the genre, artist name, album and track name on the screen. When you play MP3/WMA/AAC discs, you will see the folder name, artist name, album name and track name on the screen. If the disc was not recorded with this information, it will not be displayed.
Each time you press the TITLE button, the center display changes from artist name to album name, to track name and then to normal display that shows the track number and the elapsed time. When playing a disc in MP3/WMA/AAC, the display mode changes from folder name, to file name, to artist tag, to album tag, to track tag, and then to normal display.
342
2011 Odyssey10/07/17 10:19:47 31TK8600_348
To Change Tracks Each time you press and release the side of the skip bar, the player skips forward to the beginning of the next track. Press and release the side of the skip bar to skip backward to the beginning of the current track. Press the side again to skip to the previous track. To move rapidly within a track, press and hold either side of the skip bar.
When you insert a CD for the first time, the system automatically starts recording to the hard disc. For information on recording from music CDs, see page
357
When you insert a CD for the first time, a Gracenote notification appears. For more information, see page
380
Playing a Disc (Models with navigation system)
To Choose a Track
Track Repeat
TRACK REPEAT INDICATOR
TRACK LIST
You can also choose a track directly from a track list. If there are no track names, you will see ‘‘No Title’’ displayed. Turn the interface dial to select the desired track, then press ENTER on the interface selector.
REPEAT OFF ICON
TRACK REPEAT ICON
To replay the current track continuously, push the interface selector down while playing a disc. Turn the interface dial to select Repeat on the AUDIO MENU, and press ENTER on the interface selector. Turn the interface dial to select Repeat icon, and press ENTER on the interface selector.
CONTINUED
343
2011 Odyssey10/07/17 10:19:54 31TK8600_349
Playing a Disc (Models with navigation system)
To turn this feature off, turn the interface dial to select the OFF icon, and press ENTER on the interface selector.
Random Play
TRACK RANDOM INDICATOR
Turn the interface dial to select the track random icon, and press ENTER on the interface selector.
To turn this feature off, turn the interface dial to select the OFF icon, and press ENTER on the interface selector.
TRACK RANDOM ICON
This feature plays the tracks within a disc in random order. When playing MP3, WMA or AAC format discs, all the tracks within the disc are played in random order, regardless of the configuration of the folder.
Push the interface selector down while playing a disc. Turn the interface dial to select Random on the AUDIO MENU, and press ENTER on the interface selector.
344
2011 Odyssey10/07/17 10:20:03 31TK8600_350
Track Scan
SCAN ICON
The scan function samples all tracks on the disc in the order they are recorded on the disc.
To activate scan, press the SCAN button, or push the interface selector down while playing a disc. Turn the interface dial to select Scan on the AUDIO MENU, and press ENTER on the interface selector.
Playing a Disc (Models with navigation system)
Turn the interface dial to select the Scan icon, and press ENTER on the interface selector. You will hear a 10- second sampling of each track on the disc. When you return to disc mode, the disc will begin playing from where it left off.
To turn this feature off, press the SCAN button again, or turn the interface dial to select the OFF icon, and press ENTER on the interface selector. The system begins to play the last track sampled.
To Stop Playing a Disc To take the system out of the disc mode, press one of other source buttons than the CD button.
You can also press the MODE button on the steering wheel to change modes.
If you turn the system off while a disc is playing, either with the power/volume knob or the ignition switch, play will continue at the same point when you turn it back on.
345
2011 Odyssey10/07/17 10:20:09 31TK8600_351
Playing a Disc (Models with navigation system)
Playing an MP3/WMA/AAC Disc The CD player can play CD-Rs and CD-RWs compressed in MP3, WMA or AAC formats. When playing a disc in MP3, WMA or AAC, you will see ‘‘MP3,’’ ‘‘WMA’’ or ‘‘AAC’’ on the center display and screen (if selected). A disc can support more than 99 folders, and each folder can hold up to 255 playable files.
NOTE: Combining a low sampling frequency with a low bitrate may result in extremely degraded sound quality.
To play an MP3/WMA/AAC disc, use the disc controls previously described, along with the following information.
Depending on the software the files were made with, it may not be possible to play some files, or display some text data.
Changing the Folders Each time you press either side of the bar, the folder title and its first file’s information appear on the center display. On the navigation display, each time you press either side of the bar, the system skips to the previous or next folder on the disc and displays a list of the selected folder’s contents.
346
2011 Odyssey10/07/17 10:20:19 31TK8600_352
ChangingandSelectingtheFolders/ Files
Playing a Disc (Models with navigation system)
FOLDER LIST
Using the interface selector, you can see the list of all the folders within a disc. While playing an MP3/WMA/ AAC disc, push the interface selector up. The folder list in the currently playing disc will appear on the screen.
If the root folder has some additional folders in the lower layer, they will be listed on the screen.
FILE LIST
Select a desired folder by turning the interface dial, then press ENTER. The screen will change to the file list. Select a desired file and press ENTER. The selected file begins to play.
To change a file, turn the interface dial to select a desired file, then press ENTER.
Folder Repeat
FOLDER REPEAT INDICATOR
REPEAT OFF ICON
FOLDER REPEAT ICON
This feature, when activated, replays all files on the selected folder in the order they are compressed. To activate folder repeat play, push the interface selector down while playing a disc. Turn the interface dial to select Repeat on the AUDIO MENU, and press ENTER on the interface selector. Turn the interface dial to select the folder repeat icon, and press ENTER on the interface selector.
CONTINUED
347
2011 Odyssey10/07/17 10:20:25 31TK8600_353
Playing a Disc (Models with navigation system)
To turn this feature off, turn the interface dial to select the OFF icon, and press ENTER on the interface selector.
Folder Random
FOLDER RANDOM INDICATOR
To turn this feature off, turn the interface dial to select OFF icon, and press ENTER on the interface selector.
FOLDER RANDOM ICON
This feature, when activated, plays all files in the current folder in random order. To activate folder random play, push the interface selector down while playing a disc. Turn the interface dial to select Random on the AUDIO MENU, and press ENTER on the interface selector. Turn the interface dial to select the folder random icon, and press ENTER on the interface selector.
348
2011 Odyssey10/07/17 10:20:32 31TK8600_354
Playing a Disc (Models with navigation system)
File Scan
SCAN OFF ICON
10 seconds, and continues to sample the remaining files.
To turn this feature off, press and hold the SCAN button for more than 2 seconds, or turn the interface dial to select the OFF icon, and press ENTER on the interface selector.
FILE SCAN ICON
FOLDER SCAN ICON
This feature samples all files in the selected folder in the order they are stored. To activate this feature, press the SCAN button. You can also select the SCAN icon with the interface dial. Push the selector down, turn the dial to select Scan on the AUDIO MENU, then press ENTER. Turn the dial to select the scan icon, then press ENTER. The system begins to play a file for about
Folder Scan This feature, when activated, samples the first file of each folder for 10 seconds. To scan a folder, press the SCAN button repeatedly. Or, push the interface selector down while playing a disc. Turn the interface dial to select Scan on the AUDIO MENU, and press ENTER on the interface selector. Turn the interface dial to select the folder scan icon, and press ENTER on the interface selector.
CONTINUED
349
2011 OdysseyProtecting Discs For information on how to handle and protect discs, see page
352
10/07/17 10:20:39 31TK8600_355
Playing a Disc (Models with navigation system)
Removing a Disc from the Player To remove the disc, press the eject
) button.
If you do not remove the disc from the slot, the system will reload the disc after 10 seconds. The disc starts playing automatically.
The system plays the first file in the first folder for about 10 seconds. If you do nothing, the system will then play the first files in the next folders for 10 seconds. After playing the first file in the last folder, the system plays normally.
To turn this feature off, press the SCAN button again, or turn the interface dial to select the OFF icon, and press ENTER on the interface selector. The system begins to play the last track sampled.
NOTE: Each time you press and release the SCAN button, the mode changes from file scan to folder scan, then to normal play.
350
2011 Odyssey10/07/17 10:20:46 31TK8600_356
Disc Player Error Messages (Models with navigation system)
Error Message
Cause
Solution
HEAT ERROR
High Temperature
Track/File format not supported
Mechanical Error
UNSUPPORTED
BAD DISC
PLEASE CHECK
OWNER’S
MANUAL PUSH
EJECT
BAD DISC
PLEASE CHECK
Servo Error
OWNER’S MANUAL
Will disappear when the temperature returns to normal. Current track will be skipped. The next supported track or file plays automatically. Press the EJECT button and pull out the disc. Check the disc for serious damage, signs of deformation, excessive scratches, and/or dirt (see page 353). Insert the disc again. If the code does not disappear, or the disc cannot be removed, consult your dealer. Do not try to force the disc out of the player.
The chart on the right explains the error messages you may see in the center display while playing a disc.
If you see an error message in the center display while playing a disc, press the eject button. After ejecting the disc, check it for damage or deformation. If there is no damage, insert the disc again.
For additional information on
damaged discs, see page
353
The audio system will try to play the disc. If there is still a problem, the error message will reappear. Press the eject button, and pull out the disc. Insert a different disc. If the new disc plays, there is a problem with the first disc. If the error message cycle repeats and you cannot clear it, take your vehicle to a dealer.
351
2011 Odyssey10/07/17 10:20:55 31TK8600_357
Protecting Your Discs
General Information
When using CD-R discs, use only high quality discs labeled for audio use.
When recording a CD-R, the recording must be closed for it to be used.
CD-RW discs will not work in this unit.
Play only standard round discs. Odd-shaped CDs may jam in the drive or cause other problems.
Handle your discs properly to prevent damage and skipping.
352
Protecting Discs When a disc is not being played, store it in its case to protect it from dust and other contamination. To prevent warpage, keep discs out of direct sunlight and extreme heat.
To clean a disc, use a clean soft cloth. Wipe across the disc from the center to the outside edge.
A new disc may be rough on the inner and outer edges. The small plastic pieces causing this roughness can flake off and fall on the recording surface of the disc, causing skipping or other problems. Remove these pieces by rubbing the inner and outer edges with the side of a pencil or pen.
Never try to insert foreign objects in the disc player.
Handle a disc by its edges; never touch either surface. Do not place stabilizer rings or labels on the disc. These, along with contamination from fingerprints, liquids, and felt-tip pens, can cause the disc to not play properly, or possibly jam in the drive.
2011 Odyssey10/07/17 10:21:07 31TK8600_358
Additional Information on Recommended Discs The in-dash disc player has a sophisticated and delicate mechanism. If you insert a damaged disc as indicated in this section, it may become stuck inside and damage the audio unit.
Examples of these discs are shown to the right:
Protecting Your Discs
1.
Bubbled, wrinkled, labeled, and excessively thick discs
Bubbled/ Wrinkled
With Label/ Sticker
Using Printer Label Kit
Sealed
With Plastic Ring
2.
Damaged discs
3.
Poor quality discs
Chipped/ Cracked
Warped
Burrs
CONTINUED
353
2011 Odyssey10/07/17 10:21:17 31TK8600_359
Protecting Your Discs
4.
Small, irregular shaped discs
5.
Discs with scratches, dirty discs
Recommended discs are printed with the following logo.
3-inch (8-cm) CD
Triangle Shape
Can Shape
Arrow Shape
354
Audio unit may not play the following formats.
Fingerprints, scratches, etc.
CD-R or CD-RW may not play due to the recording conditions.
Scratches and fingerprints on the discs may cause the sound to skip.
This audio unit cannot play a Dual- disc .
2011 Odyssey10/07/17 10:21:25 31TK8600_360
Playing Hard Disc Drive (HDD) Audio (Models with navigation system)
Withoutrearentertainmentsystem DISC SLOT
HDD BUTTON
Withrearentertainmentsystem DISC SLOT
HDD BUTTON
AUDIO SCREEN
CENTER DISPLAY
TITLE BUTTON POWER/ VOLUME KNOB
SKIP BAR
AUDIO BUTTON
TITLE BUTTON POWER/ VOLUME KNOB
SKIP BAR
AUDIO BUTTON
CATEGORY BAR SCAN BUTTON
INTERFACE DIAL
CATEGORY BAR
SCAN BUTTON
INTERFACE DIAL
CONTINUED
355
2011 Odyssey10/07/17 10:21:33 31TK8600_361
Playing Hard Disc Drive (HDD) Audio (Models with navigation system)
Music data recorded on HDD can only be used for personal enjoyment.
Data is recorded using ultra- efficient compression technology, therefore, sound quality may vary slightly from the original.
Title information will be displayed when the information is found in the Gracenote Album Info (Gracenote Media Database) on the built-in hard disk drive. See page
380
Recording function from following media is not supported. CD-DA which prohibits the copying by SCMS CD-DA with copy control SACD (Super Audio CD) DTS-CD DVD-A CD-R/RW DVD-R/RW Copy controlled CDs (Playback cannot be guaranteed) DTS-CDs (Only enabled for playback)
−
− − − − − − −
−
If the HDD is ever replaced, all data will be lost and stored music will not be recovered.
The Hard Disc Drive (HDD) Audio function can record tracks from music CDs to the navigation system’s hard disc. This function also allows for various playing methods, such as playing recorded tracks on an artist- by-artist or genre-by-genre basis. For example, you can play the tracks that you want to listen to in any order that you like for each playlist.
NOTE:
Only recordings from a standard CD-DA (44.1 kHz, 16 bit stereo PCM digital sound data) to HDD are supported.
Digital music files, such as MP3, WMA, AAC etc., in CD-R, DVD-R and USB flash memory devices cannot be copied to HDD. Likewise, digital music files recorded to HDD cannot be copied to CD-R, DVD-R and USB devices.
356
2011 Odyssey10/07/17 10:21:46 31TK8600_362
Playing Hard Disc Drive (HDD) Audio (Models with navigation system)
Playlists Playlists are track lists in a certain playback group.
Original Playlist
This playlist is automatically
generated when the music CD is
recorded. The maximum number
of original playlists that can be
stored to the HDD is 999, with 99
songs on each playlist. Each album
name on the music CD is counted
as a playlist.
User Playlist The HDD has six playlist folders for user customizing. Each playlist can be edited by the user, and will store up to 999 songs. For more information on how to edit the user playlist, see page
369
Track Search Methods Songs that have been recorded on the HDD are categorized in groups for easy searching.
There are six categories: Album record date: Album titles are arranged by date of recording. Album: Album names are arranged in alphabetical order. Artist: Artist names are arranged in alphabetical order. Genre: Songs are arranged by genre. Playlist: Any of six playlists that are arranged by the user. Track: Track titles are arranged in alphabetical order. For more information of how to search a music, see page
364
Recording a Music CD to HDD Audio If you play a music CD that has not yet been recorded on the HDD, the system will automatically begin recording to the HDD once the disc is loaded. To turn this feature off, see page
359
CONTINUED
357
2011 Odyssey10/07/17 10:21:55 31TK8600_363
Playing Hard Disc Drive (HDD) Audio (Models with navigation system)
You can listen to tracks from other playlists that have already been recorded while recording. Press the HDD button and switch over to HDD Audio.
With the factory settings, all of the songs on a music CD are automatically recorded.
Recording settings cannot be changed during recording.
If the number of songs in the playlist exceeds 999, the oldest song will be overwritten each time you add a new song.
REC DONE ICON
REC READY ICON
REC ICON
The icons show the recording conditions for each track: Rec icon: Now recording Rec ready icon: Next to be recorded Rec done icon: Recording finished
NOTE:
Please note that there will be no compensation offered in the case of unsuccessful recording of audio data or the loss of audio data due to any cause whatsoever.
During recording, operation of this product may be slower.
If you stop the engine or the power system is turned off while recording a CD, there may be pauses between songs when you play back from the HDD.
Tracks from music CDs are recorded at four times the playback speed. You can listen to tracks as they are being recorded.
Forward/rewind, repeat, random and scan functions are not available during recording.
358
2011 Odyssey10/07/17 10:22:04 31TK8600_364
Playing Hard Disc Drive (HDD) Audio (Models with navigation system)
To Cancel Recording a Music CD to HDD In order to suspend recording, push the interface selector down, select Cancel CD Recording, and press ENTER on the interface selector.
Changing the Recording Settings RecordingaTrackonaMusicCD Manually
HDD SETUP
To change the setting to manual mode, push the interface selector down on the HDD screen. Turn the interface dial to select HDD Setup and press ENTER.
CD Recording
Turn the dial to select CD Recording and press ENTER on the interface selector.
Turn the interface dial to select MANUAL and press ENTER on the interface selector. Push down the interface selector to go back to the audio screen.
CONTINUED
359
2011 Odyssey10/07/17 10:22:12 31TK8600_365
Playing Hard Disc Drive (HDD) Audio (Models with navigation system)
Playing Tracks on HDD To play tracks on HDD, push the HDD button until the HDD Audio screen appears. Playback will start automatically with the track previously selected.
RecordingAlloftheTracksona MusicCDAutomatically To change the setting to automatically record all of the tracks on a music CD, move the interface selector down on the HDD Audio screen. Turn the interface dial to select HDD Setup, and press ENTER on the interface selector.
Turn the dial to select CD Recording and press ENTER on the interface selector.
Turn the interface dial to select AUTO, and press ENTER on the interface selector.
ToRecordaTrackManually
Record CD
Select a track to record from the music CD, push the HDD button, then push the interface selector down to display the audio menu. Turn the interface dial to select Record CD, and then press ENTER on the interface selector.
360
2011 Odyssey10/07/17 10:22:23 31TK8600_366
Playing Hard Disc Drive (HDD) Audio (Models with navigation system)
Changing a Track/Tracklist To change a track or tracklist , press on the Category bar or the Skip bar.
*
Skip Bar
Category Bar
+
−
*
+
The next tracklist is selected. If you press during the last tracklist, the first tracklist is selected. The previous tracklist is selected. If you press tracklist, the last tracklist is selected.
during the first
−
The tracklist has six search mode categories: album, artist, track, playlist, genre, and album record date. Within the selected category, the tracklist will be changed with the category bar.
Returns to the beginning of the song that is being played. Otherwise, the previous track is selected. If you press this bar during the first song, the last song is selected. The next song is selected. If you press this bar during the last song, the first song is selected.
Fast Forwarding and Rewinding To fast forward, press and hold the
side of the SKIP bar. To
rewind, press and hold the of the SKIP bar.
Repeat Playback
REPEAT OFF ICON
REPEAT ICON
side
To replay the current track continuously, push the interface selector down during track playback.
Turn the interface dial to select Repeat on the HDD AUDIO MENU, and press ENTER on the interface selector. Turn the interface dial to select the repeat icon, then press ENTER on the interface selector.
CONTINUED
361
2011 Odyssey10/07/17 10:22:29 31TK8600_367
Playing Hard Disc Drive (HDD) Audio (Models with navigation system)
To turn this feature off, turn the interface dial to select the OFF icon, then press ENTER on the interface selector.
Random Playback
RANDOM OFF ICON
Turn the interface dial to select the track random icon, and press ENTER on the interface selector.
To turn this feature off, turn the interface dial to select the OFF icon, then press ENTER on the interface selector.
RANDOM ICON
This function plays tracks in the current search mode in random order. To activate random play, push the interface selector down during track playback. Turn the interface dial to select Random on the HDD AUDIO MENU. Press ENTER on the interface selector.
362
2011 Odyssey10/07/17 10:22:38 31TK8600_368
Playing Hard Disc Drive (HDD) Audio (Models with navigation system)
Making an User Playlist The HDD has two types of the playlists: original playlist and user playlist. On the original playlist, the music CD is recorded automatically when it is played. In addition, you can create up to six user playlists on the HDD. In each playlist, you can store a desired music data from the original playlists or music CDs.
Turn the interface dial to select the scan icon. Press ENTER on the interface selector. You will hear a 10- second sampling of each track in the current search mode.
You can also select the scan feature with the SCAN button on the control panel. Press and release the SCAN button.
To turn this feature off, press the SCAN button again, or turn the interface dial to select the OFF icon, and press ENTER on the interface selector. The system begins to play the last track sampled.
Scan Playback
SCAN OFF ICON
SCAN ICON
This function samples the tracks in the current search mode in the order that they were recorded.
To activate scan, push the interface selector down during track playback. Turn the interface dial to select Scan on the HDD AUDIO MENU, and press ENTER on the interface selector.
CONTINUED
363
2011 Odyssey10/07/17 10:22:45 31TK8600_369
Playing Hard Disc Drive (HDD) Audio (Models with navigation system)
Searching the Music While playing music in the HDD playback screen, push the interface selector up to select MUSIC SEARCH. You can search a track by album, artist, track, playlist, genre, or album record date, or you can shuffle all tracks.
The audio system, including the music search feature Song By Voice , can be operated by voice control. See the navigation system manual for complete details.
TM
On the Playlist screen, turn the interface dial and select the Playlist to which the song is to be added, then press ENTER on the interface selector. You will be returned to the Playback screen.
After storing music data, you can customize the original and user playlists (see page
369
).
AddingaTracktoanOriginal/User Playlist
While a track is playing on an Original Playlist or User Playlist Playback screen, push the interface selector down. Turn the interface dial and select Add to Playlist, then press ENTER on the interface selector.
364
2011 Odyssey10/07/17 10:22:54 31TK8600_370
Playing Hard Disc Drive (HDD) Audio (Models with navigation system)
Searching Music by Album
ALPHABET TAG
Turn the interface dial to select the album you want to listen to, then press ENTER on the selector.
The first track on the selected album begins to play.
Push the selector down.
RANDOM ALL TRACKS Shuffles the playback of all tracks that have been recorded on HDD.
To shuffle all tracks, push the interface selector up to display the ‘‘Search music by’’ screen, and then push the interface selector down. Shuffled playback begins.
Push the interface selector up to display the ‘‘Search music by’’ screen, and turn the interface dial to select ‘‘Albums.’’ Press ENTER on the selector, and the album list will be displayed in alphabetical order.
If you push the interface selector right or left, you can change the alphabet tag.
365
2011 Odyssey10/07/17 10:23:01 31TK8600_371
Playing Hard Disc Drive (HDD) Audio (Models with navigation system)
Searching Music by Artist
Searching Music by Track
If you push the interface selector right or left, you can change the alphabet tag.
Turn the interface dial to select the artist you want to listen to, and press ENTER on the interface selector.
The first track on the selected artist begins to play.
Push the interface selector up to display the Search music by screen, and turn the interface dial to select ‘‘Artists.’’ Press ENTER on the interface selector, and the artist list will be displayed in alphabetical order.
366
Push the interface selector up to display the Search music by screen, and turn the interface dial to select ‘‘Tracks.’’ Press ENTER on the interface selector, and the track list will be displayed in alphabetical order.
2011 Odyssey10/07/17 10:23:08 31TK8600_372
Playing Hard Disc Drive (HDD) Audio (Models with navigation system)
If you push the interface selector right or left, you can change the alphabet tag.
Turn the interface dial to select a track you want to listen to, then press ENTER on the interface selector.
The selected track begins to play.
Searching Music by Playlists
Turn the interface dial to select the playlist you want to listen to, then press ENTER on the interface selector.
The first track on the selected playlist begins to play.
Push the interface selector up to display the Search music by screen, and turn the interface dial to select ‘‘Playlists.’’ Press ENTER on the interface selector then the playlist will be displayed.
367
2011 Odyssey10/07/17 10:23:16 31TK8600_373
Playing Hard Disc Drive (HDD) Audio (Models with navigation system)
Searching Music by Genre
The first track on the selected genre begins to play.
Searching Music by Album Record Date
RECORDED DATE
Push the interface selector up to display the Search music by screen, and turn the interface dial to select ‘‘Genres.’’ Press ENTER on the interface selector, and the genre list will be displayed.
Turn the interface dial to select the genre you want to listen to, and then press ENTER on the interface selector.
368
Push the interface selector up to display the Search music by screen, and turn the interface dial to select Album Record Date. Press ENTER on the interface selector. The album list will be displayed.
Turn the interface dial to select the album you want to listen to, then press ENTER on the selector.
2011 Odyssey10/07/17 10:23:24 31TK8600_374
Playing Hard Disc Drive (HDD) Audio (Models with navigation system)
The first track on the selected album begins to play.
Customizing Original/User Playlist After storing the data, you can change some items: name of an artist, play list name, track title, music genre, order of the tracks on the original/user playlist. You can also delete the track or the album from the playlist.
You cannot change the artist name, original play list name (album name), track name, and music genre unless you change them on the original play list.
ChangingtheOrderofTracksofthe OriginalPlaylistorUserPlaylist 1.
On the HDD audio screen, push up the interface selector to select MUSIC SEARCH. Select Albums or Playlists by turning the interface dial, then press ENTER.
2.
3.
Turn the interface dial to select the album list or the playlist, then press ENTER.
Push the interface selector down to display the AUDIO MENU for the playlist.
CONTINUED
369
2011 Odyssey10/07/17 10:23:31 31TK8600_375
Playing Hard Disc Drive (HDD) Audio (Models with navigation system)
7.
8.
9.
Turn the interface dial to select where the track is to be moved, then press ENTER on the interface selector.
Push the interface selector down to return to the Edit Music Info. screen.
Push the CANCEL button or the AUDIO button. The screen returns to the playlist.
4.
Turn the interface dial and select ‘‘Edit Music Info.,’’ then press ENTER.
5.
6.
Turn the interface dial to select Edit Track Order, then press ENTER on the interface selector.
Turn the interface dial to select the track to be moved, then press ENTER on the interface selector.
370
2011 Odyssey10/07/17 10:23:40 31TK8600_376
Playing Hard Disc Drive (HDD) Audio (Models with navigation system)
ChangingtheArtistNameofthe OriginalPlaylist 1.
While a track is playing on an ‘‘Original Playlist Playback’’ screen, push the interface selector down.
2.
Turn the interface dial and select ‘‘Edit Music Info.,’’ then press ENTER.
3.
Turn the interface dial to select Edit Artist Name, then press ENTER on the interface selector.
4.
On the ‘‘Edit an artist name’’ screen, input the new artist name.
Select a letter by turning the interface dial, then press ENTER.
5.
After inputting the name, push the interface selector down to select OK.
CONTINUED
371
2011 Odyssey10/07/17 10:23:47 31TK8600_377
Playing Hard Disc Drive (HDD) Audio (Models with navigation system)
7.
You will be returned to the ‘‘Edit music Info.’’ screen.
8.
Push the CANCEL button or the AUDIO button. The screen returns to the playlist.
ChangingtheNameoftheOriginal PlaylistorUserPlaylist 1.
Select a desired playlist to change the user playlist name, or a desired album to change the original playlist name (album name). Refer to the Music Search function on page playlist or an album. Push the interface selector down to display the AUDIO MENU for a selected playlist or album.
for how to select a
364
2.
Turn the interface dial and select ‘‘Edit Music Info.,’’ then press ENTER.
6.
The ‘‘Select an edit option’’ screen is displayed. Choose if you would like to apply the new name to both the album artist and/or the track artist. Select your edit option by turning the dial, then press ENTER.
372
2011 Odyssey10/07/17 10:23:56 31TK8600_378
Playing Hard Disc Drive (HDD) Audio (Models with navigation system)
3.
On the ‘‘Edit music Info.’’ screen, turn the interface dial to select Edit Album Name (or Edit Playlist Name to edit user playlist), then press ENTER on the interface selector.
4.
5.
6.
7.
On the ‘‘Edit an album name’’ screen, input the new Original Playlist name or User Playlist name. After inputting the name, push the interface selector down to select OK. You will be returned to the ‘‘Edit music Info.’’ screen. Push the CANCEL button or the AUDIO button. The screen returns to the playlist.
ChangingtheTrackNameofthe OriginalPlaylist 1.
While a track is playing on an ‘‘Original Playlist Playback’’ screen, push the interface selector down.
2.
Turn the interface dial and select ‘‘Edit Music Info.,’’ then press ENTER.
CONTINUED
373
2011 Odyssey10/07/17 10:24:05 31TK8600_379
Playing Hard Disc Drive (HDD) Audio (Models with navigation system)
ChangingtheMusicalGenre 1.
While a track is playing on an ‘‘Original Playlist Playback’’ screen, push the interface selector down.
2.
Turn the interface dial and select ‘‘Edit Music Info.,’’ then press ENTER.
3.
On the ‘‘Edit music Info.’’ screen, turn the interface dial to select Edit Track Name, then press ENTER on the interface selector.
4.
On the ‘‘Edit a track name’’ screen, input the new track name.
5.
After inputting the name, push the interface selector down to select OK.
6.
You will be returned to the ‘‘Edit music Info.’’ screen.
7.
Push the CANCEL button or the AUDIO button. The screen returns to the playlist.
374
2011 Odyssey10/07/17 10:24:11 31TK8600_380
Playing Hard Disc Drive (HDD) Audio (Models with navigation system)
3.
Turn the interface dial to select Edit Genre, then press ENTER on the interface selector in ‘‘Select a genre’’ screen.
4.
On the ‘‘Select a genre’’ screen, turn the interface dial and select genre, and then press ENTER on the interface selector.
5.
Turn the interface dial on the ‘‘Select a genre’’ screen to select the Original Playlist that you want to change the genre and then press ENTER on the interface selector. You will be returned to the ‘‘Edit music Info.’’ screen.
6.
Push the CANCEL button or the AUDIO button. The screen returns to the playlist.
375
2011 Odyssey10/07/17 10:24:19 31TK8600_381
Playing Hard Disc Drive (HDD) Audio (Models with navigation system)
Deleting an Album or Playlist 1.
On the HDD playback screen of the album in which you want to delete, push the interface selector down to display the AUDIO MENU.
2.
Turn the interface dial and select ‘‘Edit Music Info.,’’ then press ENTER.
NOTE:
When you delete the Original Playlist, any tracks stored in a User Playlist are also deleted.
Even if all the tracks are deleted from the User Playlist, the data folder for that playlist cannot be deleted, and their names (playlist and artist) are left. You can store tracks again on that playlist.
3.
4.
On the ‘‘Edit music Info.’’ screen, turn the interface dial and select Delete Album (or Delete Playlist), then press ENTER.
The Confirmation is displayed. Select OK and then press ENTER. You will be returned to the playback screen for the Original Playlist or User Playlist.
376
2011 Odyssey10/07/17 10:24:26 31TK8600_382
Playing Hard Disc Drive (HDD) Audio (Models with navigation system)
Deleting a Track 1.
Select the track with the interface dial from the playback screen while it is playing. Push the interface selector down to display the AUDIO MENU.
2.
Turn the interface dial and select ‘‘Edit Music Info.,’’ then press ENTER.
NOTE:
When you delete a track from the Original Playlist, the track is also deleted from the User Playlist in which the deleted track was stored.
Even if all the tracks are deleted from the User Playlist, the data folder for that playlist cannot be deleted, and their names (playlist and artist) are left. You can store tracks again on that playlist.
377
3.
4.
The ‘‘Edit music Info.’’ screen is displayed. Select Delete Track and press ENTER.
Select OK to confirm you want to delete the track. You will be returned to the Playback screen for the Original Playlist or User Playlist.
2011 Odyssey10/07/17 10:24:37 31TK8600_383
Playing Hard Disc Drive (HDD) Audio (Models with navigation system)
Acquiring Title Information 1.
Push the interface selector down to display the AUDIO MENU.
2.
3.
Turn the interface dial and select Get Music Info., then press ENTER.
On the ‘‘Select an Album’’ screen, turn the interface dial and select the title information for the Original Playlist, then press ENTER. You will be returned to the ‘‘Audio Menu’’ screen.
378
Updating Gracenote Album Info (Gracenote Media Database) You can update the Gracenote Album Info (Gracenote Media Database) that is included with the navigation system.
NOTE: Consult your dealer, or visit (in U.S.), or www.honda.com www.honda.ca updated files.
(in Canada), to acquire
1.
Insert the update disc into the disc slot, or connect the USB flash memory device that includes the update.
Checking HDD Audio Capacity
MAXIMUM CAPACITY
REMAINING CAPACITY
VERSION
You can check the HDD Audio capacity and remaining space as well as the Gracenote Music Recognition Service (CDDB) version included with the navigation system on the HDD Setup screen.
To check the HDD audio capacity, push the interface selector down to display the AUDIO MENU. Turn the interface dial to select HDD Setup, then press ENTER.
2011 Odyssey10/07/17 10:24:50 31TK8600_384
Playing Hard Disc Drive (HDD) Audio (Models with navigation system)
Turn the interface dial and select Gracenote Info. Update, then press ENTER on the interface selector.
ClearingtheHDD Any music, data, calendar entries, etc. that have been stored on the HDD can be deleted.
4.
5.
Turn the dial to select USB or DISC on the Update Gracenote by screen, then press ENTER on the selector.
1.
2.
3.
Press the INFO button, rotate the interface dial to select ‘‘Set up,’’ and press ENTER.
Move the interface selector to the right to navigate to the ‘‘Set up