2010 Honda Insight Owners Manual

−

side, the

Each time you

SEEK/SKIP press and release the player skips forward to the beginning of the next track (files in MP3/WMA mode). Press and release the backward to the beginning of the current track. Press it again to skip to the beginning of the previous track.

side to skip

To move rapidly within a track, press and hold the button.

, or the

You can also operate the track selection by using the VOL/SELECT knob. Press the VOL/SELECT knob and you will see ‘‘SEL’’ in the display. Turn the knob to switch the track number. Press the VOL/SELECT knob or button to set your selection. To turn it off, press the

button.

CONTINUED

177

2010 Insight０８／１２／２７　１１：４９：４０　３１ＴＭ８６００　０１８３　

Playing a Disc (Models without navigation system)

InMP3/WMAmode FOLDER SELECTION select a different folder, press the

To

−

or button to skip to the next

button. Press the

button to skip

folder, and the to the previous folder.

You can also operate the folder and file selection by using the VOL/ SELECT knob. Press the VOL/ SELECT knob and you will see SEL in the display, Turn the knob to switch the folder number and press the knob to set your selection. To turn it off, press the button repeatedly.

−

To continuously replay

REPEAT (TRACK/FILE REPEAT) a track (file in MP3/WMA mode), press and release the RPT button. You will see RPT in the display. Press and hold the RPT button to turn it off.

178

−

This

InMP3/WMAmode FOLDER-RANDOM feature, when activated, plays the files in the current folder in random order, rather than in the order they are compressed in MP3/WMA. To activate folder random play, press the RDM button. You will see F-RDM in the display. The system will then select and play files randomly. This continues until you deactivate folder random play by pressing and holding the RDM button.

Each time you press and release the RDM button, the mode changes from folder random play, to within a disc random play, then to normal play.

−

This feature,

InMP3/WMAmode FOLDER-REPEAT when activated, replays all the files in the selected folder in the order they are compressed in MP3/WMA. To activate folder repeat mode, press the RPT button repeatedly until you see F-RPT in the display. The system continuously replays the current folder. Press and hold the RPT button to turn it off.

Each time you press and release the RPT button, the mode changes from file repeat to folder repeat, then to normal play.

−

RANDOM (Random within a disc) This feature plays the tracks within a disc in random order. In MP3/WMA mode, all files in all folders are played in random order. To activate random mode, press the RDM button repeatedly until you see RDM in the display. Press and hold the RDM button to turn it off.

2010 Insight０８／１２／２７　１１：４９：４８　３１ＴＭ８６００　０１８４　

−

The SCAN function

SCAN samples all the tracks on the disc in the order they are recorded on the disc (all files in the selected folder in MP3 or WMA mode). To activate the scan feature, press and release the SCAN button. You will see ‘‘SCAN’’ in the display. You will get a 10
second sampling of each track/file in the disc/folder. Press and hold the SCAN button to get out of scan mode and play the last track sampled.

Playing a Disc (Models without navigation system)

This feature,

InMP3/WMAmode FOLDER-SCAN − when activated, samples the first file in each folder on the disc in the order they are recorded. To activate the folder scan feature, press the SCAN button repeatedly. You will see ‘‘F-SCAN’’ in the display. The system will then play the first file in the main folders for about 10
seconds. When it plays a file that you want to continue listening to, press and hold the SCAN button. When the system samples the first file of all folders, F-SCAN is canceled, and the system plays normally.

Each time you press and release the SCAN button, the mode changes from file scan to folder scan, then to normal play.

To Stop Playing a Disc Press the eject button ( remove the disc. If you eject the disc, but do not remove it from the slot, the system will automatically reload the disc after 10 seconds and begin playing.

) to

Press the FM/AM button to switch to the radio while a disc is playing. To play the disc, press the CD button.

If you turn the system off while a disc is playing, either with the ) button or by turning off the ignition switch, the disc will stay in the drive. When you turn the system back on, the disc will begin playing where it left off.

Protecting Discs For information on how to handle and protect compact discs, see page 248

179

2010 Insight０８／１２／２７　１１：４９：５５　３１ＴＭ８６００　０１８５　

Disc Player Error Messages (Models without navigation system)

Error

Message

UNSUPPORTED

Cause

Track/File format not supported

BAD DISC

PLEASE CHECK

OWNERS MANUAL

PUSH EJECT

CHECK DISC

Mechanical Error

FOCUS Error

TOC Error

Solution

Current track will be skipped. The next supported track or file plays automatically. Press the EJECT button and pull out the disc. Check the disc for serious damage, signs of deformation, excessive scratches, and/or dirt (see page 249). Insert the disc again. If the code does not disappear, or the disc cannot be removed, consult your dealer. Do not try to force the disc out of the player. Press the EJECT button and pull out the disc. Check if it is inserted correctly in the disc player. Make sure the disc is not scratched or damaged. For more information, see page 249.

The chart on the right explains the error messages you may see in the display while playing a disc.

If you see an error message in the display while playing a disc, press the eject button. After ejecting the disc, check it for damage or deformation. If there is no damage, insert the disc again. For the additional information on damaged discs, see page

249

The audio system will try to play the disc. If there is still a problem, the error message will reappear. Press the eject button, and pull out the disc.

Insert a different disc. If the new disc plays, there is a problem with the first disc. If the error message cycle repeats and you cannot clear it, take your vehicle to a dealer.

180

2010 Insight０９／０１／０７　１６：００：５２　３１ＴＭ８６００　０１８６　

Playing an iPod (Models without navigation system)

EX model

iPod INDICATOR

USB INDICATOR

BUTTON

AUX BUTTON

BUTTON

TITLE BUTTON

RDM BUTTON

RPT BUTTON

181

SEEK (SKIP BUTTON

−

SEEK (SKIP BUTTON

＋

BUTTON

2010 Insight０９／０１／０７　１６：０１：０１　３１ＴＭ８６００　０１８７　

Playing an iPod (Models without navigation system)

iPods compatible with your audio system using the USB adapter cable are:

NOTE:

Do not connect your iPod using a hub.

Do not keep the iPod in the vehicle. Direct sunlight and high heat will damage it.

Do not use an extension cable between the USB adapter cable equipped with your vehicle and your dock connector.

We recommend backing up your data before playing it.

Model

Software

iPod Classic 5 Gen. th (2005 or later) iPod Classic (2007 or later) iPod nano iPod nano 2
generation iPod nano 3
generation iPod touch iPhone

nd

rd

Ver. 1.2 or more

Ver. 1.0 or more

Ver. 1.2 or more Ver. 1.1.2 or more

Ver. 1.0 or more

Ver. 1.1.1 or more Ver. 1.1.1 or more

Use only compatible iPods with the latest software. iPods that are not compatible will not work in this audio unit.

To Play an iPod EXmodel This audio system can play the audio files on the iPod with the same controls used for the in-dash disc player. To play an iPod, connect it to the USB adapter cable in the console compartment by using your dock connector, then press the AUX button. The ignition switch must be in the ACCESSORY (I) or ON (II) position. The iPod will also be recharged with the ignition switch in these positions.

The system will only play songs stored on the iPod with iTunes.

iPod and iTunes are registered trademarks owned by Apple Inc.

182

2010 Insight０８／１２／２７　１１：５０：１８　３１ＴＭ８６００　０１８８　

Playing an iPod (Models without navigation system)

ConnectinganiPod

USB CONNECTOR

USB ADAPTER CABLE

USB ADAPTER CABLE

1.

Unclip the USB connector by pivoting it, and pull out the USB adapter cable in the console compartment.

DOCK CONNECTOR

2.

Connect your dock connector to the iPod correctly and securely.

3.

Install the dock connector to the USB adapter cable securely.

If the iPod indicator does not appear in the audio display, check the connections, and try to reconnect the iPod a few times.

If the audio system still does not recognize the iPod, the iPod may need to be reset. Follow the instructions that came with your iPod, or you can find reset instructions online at ipod.

www.apple.com/

CONTINUED

183

2010 Insight０８／１２／２７　１１：５０：２６　３１ＴＭ８６００　０１８９　

Playing an iPod (Models without navigation system)

TextDataDisplayFunction Each time you press the TITLE button the display mode switches between the album name, the song name, the artist name, or name off (which turns off the text display).

The display shows up to 16
characters of the selected data. If the text data has more than 16
characters, you will see the first 15
characters and the indicator in the display. Press and hold the TITLE button until the next 16
characters are shown.

＞

ToChangeorSelectFiles Use the SKIP button while an iPod is playing to change files.

SKIP

− (SKIP

Each time you press the

＋

) button, the system

skips forward to the beginning of the next file. Press the (SKIP button, to skip backward to the beginning of the current file. Press it again to skip to the beginning of the previous file.

−

To move rapidly within a file, press and hold either side ( of the SKIP button.

or

184

2010 Insight０８／１２／２７　１１：５０：３５　３１ＴＭ８６００　０１９０　

Playing an iPod (Models without navigation system)

The display shows items on the selected list. Turn the VOL/ SELECT knob to select an item, then press the VOL/SELECT knob to set your selection.

If you select ‘‘ALL,’’ all available files on the selected list are played.

Pressing the button goes back to the previous display and pressing the TITLE button cancels this setting mode.

Press the VOL/ SELECT knob.

You can also select a file from any list on the iPod menu: playlists, artists, albums and songs, by using the VOL/SELECT knob. Push the VOL/SELECT knob to switch the display to an iPod menu, then turn the VOL/SELECT knob to select a desired list. Press the VOL/SELECT knob to set your selection.

ToSelectRepeatorShuffleMode: You can select any type of repeat and shuffle mode by using the RPT button or the RDM button.

−

This feature

REPEAT continuously plays a file. To activate the repeat feature, press the RPT button. You will see ‘‘RPT’’ in the display. To turn it off, press the RPT button again.

−

This feature

SHUFFLE ALL plays all available files in a selected list (playlists, artists, albums or songs) in random order. To activate the shuffle all feature, press the RDM button. You will see ‘‘RDM’’ in the display. To turn it off, press and hold the RDM button.

CONTINUED

185

2010 Insight０８／１２／２７　１１：５０：４３　３１ＴＭ８６００　０１９１　

Playing an iPod (Models without navigation system)

To Stop Playing Your iPod To play the radio when an iPod is playing, press the FM/AM button. If a disc is in the audio unit, press the CD button to play the disc.

＊

DisconnectinganiPod You can disconnect the iPod at any time when you see the ‘‘OK to disconnect’’ message in the iPod display. Always make sure you see the ‘‘OK to disconnect’’ message in the iPod display before you disconnect it. Make sure to follow the iPod’s instructions on how to disconnect the dock connector from the USB adapter cable.

＊

The displayed message may vary on models or versions. On some models, there is no message to disconnect.

−

This feature

SHUFFLE ALBUM plays all available albums in a selected list (playlists, artists, albums or songs) in random order. The files in each album are played in the recorded order. To activate the shuffle album feature, press the RDM button repeatedly. You will see ‘‘F-RDM’’ in the display. To turn it off, press and hold the RDM button.

Each time you press the RDM button, the mode changes from shuffle all play to shuffle album play, then to normal play.

186

If you reconnect the same iPod, the system may begin playing where it left off, depending on what mode the iPod is in when it is reconnected.

When you disconnect the iPod while it is playing, the display shows ‘‘USB NO DATA.’’

iPod Error Messages If you see an error message in the display, see page

187

2010 Insight０８／１２／２７　１１：５０：４８　３１ＴＭ８６００　０１９２　

If you see an error message on the audio display while playing an iPod, find the solution in the chart to the right. If you cannot clear the error message, take your vehicle to your dealer.

iPod Error Messages (Models without navigation system)

Cause

USB ROM Error

Error

Message USB ERROR BAD USB DEVICE

PLEASE CHECK

Abnormal power source

OWNERS MANUAL

NO SONG

No files in iPod

UNSUPPORTED

Use of unsupported device

UNSUPPORTED

VER.

Use of unsupported iPod

CONNECT

RETRY

Recognition failure of iPod

Solution

There is problem with the USB adapter unit. Appears when the overcurrent protection feature of the system stops supplying power to USB because an incompatible device is connected. Disconnect the device. Then, turn the audio system off, and turn it on again. Do not reconnect the device that caused the error. Appears when the iPod is empty. Store some files in the iPod. Appears when an unsupported device is connected. Disconnect the device. Appears when an unsupported iPod is connected. See page 182 for the specification information for iPods. If it appears when a supported iPod is connected, update the iPod software to the newer version. Appears when the system dose not acknowledge the iPod. Reconnect the iPod.

187

2010 Insight０９／０１／０７　１６：０１：０７　３１ＴＭ８６００　０１９３　

Playing a USB Flash Memory Device (Models without navigation system)

EX model

BUTTON

USB INDICATOR

AUX BUTTON

BUTTON

VOL/SELECT BUTTON

TITLE BUTTON

188

RDM BUTTON

RPT BUTTON

SEEK (SKIP BUTTON

−

SEEK (SKIP BUTTON

＋

BUTTON

2010 Insight０９／０１／０７　１６：０１：１８　３１ＴＭ８６００　０１９４　

Playing a USB Flash Memory Device (Models without navigation system)

To Play a USB Flash Memory Device EXmodel This audio system can operate the audio files on a USB flash memory device with the same controls used for the in-dash disc player. To play a USB flash memory device, connect it to the USB adapter cable in the console compartment, then press the AUX button.

＊

The audio system reads and plays the audio files on the USB flash memory device in MP3, WMA or AAC formats. Depending on the format, the display shows MP3, WMA or AAC when a USB flash memory device is playing. The USB flash memory device limit is up to 700 folders or up to 65535 files.

＊

Only AAC format files recorded with iTunes are playable on this audio unit.

The recommended USB flash memory devices are 256 MB or higher. Some digital audio players may be compatible as well.

Some USB flash memory devices (such as devices with security lock- out features, etc.) will not work in this audio unit.

NOTE:

Do not use a device such as a card reader or hard drive as the device or your files may be damaged.

Do not connect your USB flash memory device using a hub.

Do not use an extension cable to the USB adapter cable equipped with your vehicle.

Do not keep a USB flash memory device in the vehicle. Direct sunlight and high heat will damage it.

We recommend backing up your data before playing a USB flash memory device.

Depending on the type and number of files, it may take some time before they begin to play.

Depending on the software the files were made with, it may not be possible to play some files, or display some text data.

CONTINUED

189

2010 Insight０８／１２／２７　１１：５１：１７　３１ＴＭ８６００　０１９５　

Playing a USB Flash Memory Device (Models without navigation system)

The specifications for compatible WMA files are: −

Sampling frequency: 32/44.1/48 kHz Bitrate: 48 320/VBR kbps (Max 384) Supported standards: WMA version 7/8/9
Partition: Top partition only Maximum layers: 8

−

−

− −

−

The specifications for compatible AAC files are: −

Sampling frequency: 8/11.025/12/16/22.05/24/32/ 44.1/48 kHz Bitrate: 8 320 kbps − Supported standards: MPEG4/AAC LC MPEG2/AAC LC Partition: Top partition only Maximum layers: 8

−

−

− −

The specifications for compatible MP3 files are: −

Sampling frequency: 32/44.1/48 kHz (MPEG1) 16/22.05/24 kHz (MPEG2) Bitrate: 32/40/48/56/64/80/96/112/128/ 160/192/224/256/320/VBR kbps (MPEG1) 8/16/24/32/40/48/56/64/80/96/ 112/128/144/160/VBR kbps (MPEG2) Supported standards: MPEG1 Audio Layer3
MPEG2 Audio LSF Layer3
Partition: Top partition only Maximum layers: 8

−

−

− −

190

2010 Insight０８／１２／２７　１１：５１：２４　３１ＴＭ８６００　０１９６　

Playing a USB Flash Memory Device (Models without navigation system)

ConnectingaUSBFlashMemory Device

USB CONNECTOR

When the USB flash memory device is connected, the USB indicator is shown in the display.

USB ADAPTER CABLE

USB ADAPTER CABLE

1.

Unclip the USB connector by pivoting it, and pull out the USB adapter cable in the console compartment.

2.

Connect the USB flash memory device to the USB connector correctly and securely.

CONTINUED

191

2010 Insight０８／１２／２７　１１：５１：３４　３１ＴＭ８６００　０１９７　

Playing a USB Flash Memory Device (Models without navigation system)

ToChangeorSelectFiles Use the SKIP button while a USB flash memory device is playing to change files.

SKIP

− (SKIP

Each time you press the

＋

) button, the system

skips forward to the beginning of the next file. Press the (SKIP button, to skip backward to the beginning of the current file. Press it again to skip to the beginning of the previous file.

−

To move rapidly within a file, press and hold either side ( of the SKIP button.

or

−

To

FOLDER SELECTION select a different folder, press the button. button to skip to

Press the the next folder, and press the button to skip to the

button or

beginning of the previous folder.

TextDataDisplayFunction Each time you press the TITLE button, the display mode shows you in sequence, the folder name, the file name, the artist name, the album name, the song name, or name off (which turns off the text display).

The display shows up to 16
characters of the selected data. If the text data has more than 16
characters, you will see the first 15
characters and the indicator in the display. Press and hold the TITLE button until the next 16
characters are shown.

＞

192

2010 Insight０８／１２／２７　１１：５１：４１　３１ＴＭ８６００　０１９８　

Playing a USB Flash Memory Device (Models without navigation system)

ToSelectaFilefromFolderandFile Lists

Pressing the button goes back to the previous display and pressing the TITLE button cancels this setting mode.

Folder Selection

Track Selection

Press the VOL/ SELECT knob.

You can also select a folder or file by using the VOL/SELECT knob. Push the VOL/SELECT knob to switch the display to the folder or file list, then turn the VOL/SELECT knob to select a folder or file. Press the VOL/SELECT knob to set your selection.

ToSelectRepeat,RandomorScan Mode: You can select any type of repeat, random and scan modes by using the RPT button, RDM button, or SCAN button.

CONTINUED

193

2010 Insight０８／１２／２７　１１：５１：４６　３１ＴＭ８６００　０１９９　

Playing a USB Flash Memory Device (Models without navigation system)

−

This feature plays all

RANDOM the files in random order. To activate the track random feature, press the RDM button. You will see ‘‘RDM’’ in the display. To turn it off, press and hold the RDM button.

−

This feature

REPEAT continuously plays a file. To activate the repeat feature, press the RPT button. You will see ‘‘RPT’’ in the display. To turn it off, press and hold the RPT button.

−

This feature

FOLDER REPEAT replays all the files in the selected folder in the order they are stored. To activate the folder repeat feature, press the RPT button repeatedly. You will see ‘‘F-RPT’’ in the display. To turn it off, press and hold the RPT button.

Each time you press and release the RPT button, the mode changes from file repeat to folder repeat, then to normal play.

194

2010 Insight０８／１２／２７　１１：５１：５１　３１ＴＭ８６００　０２００　

Playing a USB Flash Memory Device (Models without navigation system)

−

This

FOLDER RANDOM feature plays the files in the selected folder in random order. To activate the folder random feature, press the RDM button repeatedly. You will see ‘‘F-RDM’’ in the display. To turn it off, press and hold the RDM button.

Each time you press the RDM button, the mode changes from track random, play to folder random play, then to normal play.

−

This feature samples all

SCAN files in the selected folder in the order they are stored. To activate the scan feature, press the SCAN button. You will see ‘‘SCAN’’ in the display. You will get a 10 second sampling of each file in the folder. Press and hold the SCAN button to get out of the scan mode and play the last file sampled.

−

This feature

FOLDER SCAN samples the first file in each folder in the order they are stored. To activate the folder scan feature, press the SCAN button repeatedly. You will see ‘‘F-SCAN’’ in the display. You will get a 10 second sampling of the first file in each folder. Press and hold the SCAN button to get out of the folder scan mode and play the last file sampled.

Each time you press and release the SCAN button, the mode changes from file scan to folder scan, then to normal play.

195

2010 Insight０８／１２／２７　１１：５１：５８　３１ＴＭ８６００　０２０１　

Playing a USB Flash Memory Device (Models without navigation system)

USB Flash Memory Device Error Messages If you see an error message in the display, see page

197

To Stop Playing a USB Flash Memory Device To play the radio when a USB flash memory device is playing, press the FM/AM button. If a disc is in the audio unit, press the CD button to play the disc.

DisconnectingaUSBFlashMemory Device You can disconnect the USB flash memory device at any time even if the USB mode is selected on the audio system. Always follow the USB flash memory device’s instructions when you remove it.

When you disconnect the USB flash memory device while it is playing, the display shows ‘‘USB NO DATA.’’

If you reconnect the same USB flash memory device, the system will begin playing where it left off.

196

2010 Insight０８／１２／２７　１１：５２：０３　３１ＴＭ８６００　０２０２　

USB Flash Memory Device Error Messages (Models without navigation system)

If you see an error message on the audio display while playing a USB flash memory device, find the solution in the chart to the right. If you cannot clear the error message, take your vehicle to your dealer.

Cause

USB ROM Error

Error

Message USB ERROR BAD USB DEVICE

PLEASE CHECK

Abnormal power source

OWNERS MANUAL

UNPLAYABLE

Use of unsupported files

FILE

NO SONG

No files in USB flash memory device

UNSUPPORTED

Use of unsupported USB flash memory device

Solution

There is problem with the USB adapter unit. Appears when the overcurrent protection feature of the system stops supplying power to USB because an incompatible device is connected. Disconnect the device. Then, turn the audio system off, and turn it on again. Do not reconnect the device that caused the error. Appears when the files in the USB flash memory device are DRM or an unsupported format. This error message appears for about 3
seconds, then plays the next song. Appears when the USB flash memory device is empty or there are no MP3, WMA, or AAC files in the USB flash memory device. Save some MP3, WMA, or AAC files in the USB flash memory device. Appears when an unsupported device is connected. See page 190 for the specification information for the USB flash memory device. If it appears when the supported device is connected, reconnect the device.

197

2010 Insight０８／１２／２７　１１：５２：０８　３１ＴＭ８６００　０２０３　

Playing the AM/FM Radio (Models with navigation system)

POWER/VOLUME KNOB

FM1 ICON

AM ICON

SOUND ICON

FM2 ICON

AUTO SELECT ICON

BACK GROUND ICON

AM/FM BUTTON

AUDIO BUTTON

SCAN BUTTON

198

TUNE BAR

PRESET BUTTONS

2010 Insight０８／１２／２７　１１：５２：１６　３１ＴＭ８６００　０２０４　

Playing the AM/FM Radio (Models with navigation system)

Voice Control System In addition to the standard audio controls, the audio system in your vehicle can be operated using the voice control system. See the Navigation System Manual for complete details.

To Play the AM/FM Radio Turn the system on by pushing the power/volume knob or the AM/FM button. Adjust the volume by turning the power/volume knob.

Pushing the AUDIO button will also turn on the system.

You can also operate the audio system without using the control icons on the audio screen. Use the control buttons on the left side of the screen. The status bar appears on the bottom of the screen each time you operate any of the control buttons. On the navigation screen, you can also see audio information by touching the AUDIO INFO icon on the lower half of the screen.

The band and frequency that the radio was last tuned to are displayed. To change bands, press the AM/FM button, or touch the desired band icon (FM1, FM2, or AM). On the FM band, STEREO will be displayed if the station is broadcasting in stereo. Stereo reproduction on AM is not available.

To Select a Station You can use any of five methods to find radio stations on the selected band: tune, seek, scan, the preset buttons, and auto select.

−

Use the TUNE bar to tune

TUNE the radio to a desired frequency. Press the side of the bar to tune to a higher frequency, and press the

▲

▼

side to tune to a lower

frequency.

or

▲ ▼

Press and hold the side of the TUNE bar until you hear two beeps to change the frequency rapidly. Release the bar when the display reaches the desired frequency.

CONTINUED

199

2010 Insight０８／１２／２７　１１：５２：２５　３１ＴＭ８６００　０２０５　

Playing the AM/FM Radio (Models with navigation system)

−

Each preset button can

Preset store one frequency on AM and two frequencies on FM.

Each preset button’s frequency is shown on the bottom of the audio display.

1.

Select the desired band, AM or FM.

2.

Use the tune, seek, or scan function to tune the radio to a desired station.

3.

Pick a preset button, and hold it until you hear a beep.

4.

Repeat steps 1 through 3 to store a total of six stations on AM and twelve stations on FM.

−

The seek function

SEEK searches up and down from the current frequency to find a station with a strong signal. To activate it, press and hold the side of the TUNE bar until you hear a beep, then release it.

▲ ▼

or

−

SCAN The scan function samples all stations with strong signals on the selected band. To activate it, press the SCAN button, then release it. You will see SCAN in the display. When the system finds a strong signal, it will stop and play that station for about 10 seconds.

If you do nothing, the system will then scan for the next strong station and play it for 10 seconds. When it plays a station you want to listen to, press the SCAN button again.

200

2010 Insight０８／１２／２７　１１：５２：３３　３１ＴＭ８６００　０２０６　

Playing the AM/FM Radio (Models with navigation system)

− If you are

AUTO SELECT traveling and can no longer receive your preset stations, you can use the auto select feature to find stations in the local area.

Press the AUDIO button to view the audio control icons, then touch the AUTO SEL icon. You will see AUTO SEL flashes in the display, and the system goes into scan mode for several seconds. It stores the frequencies of six AM, and twelve FM stations in the preset buttons.

You will see ‘‘0’’ displayed after pressing a preset button if auto select cannot find a strong station for every preset button.

If you do not like the stations auto select has stored, you can store other frequencies on the preset buttons as previously described.

ToturnoffAutoSelect, AUTO SEL icon. This restores the presets you originally set.

touch the

For information on FM/AM radio frequencies and reception, see page 246

Adjusting the Sound

SOUND ICON

You can adjust the sound on the navigation screen. To adjust the sound, push the AUDIO button, then enter the sound grid by touching the SOUND icon on the display.

CONTINUED

201

2010 Insight０８／１２／２７　１１：５２：４２　３１ＴＭ８６００　０２０７　

Playing the AM/FM Radio (Models with navigation system)

SPEAKER SETTING

−

FADER Adjusts the front-to-back strength of the sound. To adjust the front/rear fader, touch the FR or RR icon.

−

Adjusts the side-to-

BALANCE side strength of the sound. To adjust the left/right balance, touch the L or R icon.

BASS/TREBLE SETTING

The right upper display shows you the current setting of the sound strength coming from each speaker.

BASS

−

Adjusts the bass.

−

Adjusts the treble. To

TREBLE adjust the treble and bass, touch either bass adjustment bar. The adjustment bar on the lower right display shows you the current setting.

on the treble or

or

−

The SVC mode

SVC (speed-sensitive volume compensation) controls the volume based on vehicle speed. The faster you go, the louder the audio volume becomes. As you slow down, the audio volume decreases. Touch the appropriate icon (Low, Mid, Hi, Off) to select the mode.

202

This function is set to MID as the default setting when the vehicle leaves the factory. If you feel the sound is too loud, choose low. If you feel the sound is too quiet, choose Hi.

You can also select the icon with the joystick. Move it up and down to move the highlighting and scroll through lists. Select the icon, then enter the joystick.

The system will return to the audio display about 10 seconds after you stop adjusting a mode.

2010 Insight０８／１２／２７　１１：５２：４６　３１ＴＭ８６００　０２０８　

Playing the AM/FM Radio (Models with navigation system)

ScreenMode You can select the background screen to display the sound level. There are three screen modes: level (the sound level is shown with the vertical bars), spectrum analysis (the sound level appears as ripples of water), and off. Each time you touch the background icon, the display changes.

Audio System Lighting You can use the instrument panel brightness control knob to adjust the illumination of the control panel (see page illuminates when the parking lights are on, even if the radio is turned off.

). The audio system

121

203

2010 Insight０８／１２／２７　１１：５２：５１　３１ＴＭ８６００　０２０９　

Playing a Disc (Models with navigation system)

CD ICON

JOYSTICK

RANDOM BUTTON

FAST FORWARD BUTTON

SKIP

＋

BUTTON

REPEAT BUTTON

REWIND BUTTON

SKIP

−

BUTTON

POWER/VOLUME KNOB

OPEN BUTTON

CD/AUX BUTTON

AUDIO BUTTON

SCAN BUTTON

TUNE BAR

204

2010 Insight０８／１２／２７　１１：５２：５８　３１ＴＭ８６００　０２１０　

Playing a Disc (Models with navigation system)

To Play a Disc (In-dash single player) You operate the in-dash disc player with the same controls used for the radio.

Do not use discs with adhesive labels. The label can curl up and cause the disc to jam in the unit.

This audio system can also play CD- Rs and CD-RWs compressed in MP3
or WMA formats. When playing a disc in MP3, you will see ‘‘MP3’’ on the screen. In WMA format, ‘‘WMA’’ will appear on the screen. You can select up to 255 folders and play up to 999 tracks. If the disc has a complex structure, it takes a while to read the disc before the system begins to play it.

If you have a disc that is a combination of CD-DA tracks and MP3/WMA files, you can choose the format to listen to by pressing and holding the CD/AUX button.

Video CDs and DVD discs will not work in this unit.

A disc compressed in AAC format cannot be played in this audio system.

CONTINUED

205

2010 Insight０８／１２／２７　１１：５３：０７　３１ＴＭ８６００　０２１１　

Playing a Disc (Models with navigation system)

−

The specifications for compatible WMA files are: −

Sampling frequency: 32/44.1/48 kHz Bitrate: 48/64/80/96/128/160/192 kbps Compatible with variable bitrate and multi-session Maximum layers (including ROOT): 8 layers

−

−

If an MP3 or WMA file is

NOTE: protected by digital rights management (DRM), the audio unit displays FILE ERROR, and then skips to the next file.

−

The specifications for compatible MP3 files are: −

Sampling frequency: 32/44.1/48 kHz (MPEG1) 16/22.05/24 kHz (MPEG2) Bitrate: 32/40/48/56/64/80/96/112/128/ 160/192/224/256/320 kbps (MPEG1) 8/16/24/32/40/48/56/64/80/96/ 112/128/160 kbps (MPEG2) Compatible with variable bitrate and multi-session Maximum layers (including ROOT): 8 layers

−

−

206

2010 Insight０８／１２／２７　１１：５３：１５　３１ＴＭ８６００　０２１２　

Playing a Disc (Models with navigation system)

ToLoadaDisc

DISC SLOT

CLOSE BUTTON

OPEN BUTTON

The in-dash disc player is behind the navigation screen. To use the disc player, press the OPEN button beside the screen. The screen folds back, and the disc slot appears.

Insert a disc about halfway into the disc slot. The drive will pull the disc in the rest of the way and begin to play it.

You cannot load and play 3-inch (8-cm) discs in this system.

To return the screen to the upright position, press the CLOSE button on the edge of the screen panel. Do not use the folded screen as a tray. If you put a cup, for example, on the screen, the liquid inside the cup may spill on the screen when you go over a bump.

CONTINUED

207

2010 Insight０８／１２／２７　１１：５３：２４　３１ＴＭ８６００　０２１３　

Playing a Disc (Models with navigation system)

ToChangeorSelectTracks/Files

PRESET BUTTON’S FUNCTION

You can also select an icon with the joystick. Move it to left, right, up, or down to change the highlighting and scroll through lists. Then press ENT on the top of the joystick to select the icon.

PRESET BUTTONS

You can use the preset buttons while a disc is playing to select passages and change tracks (files in MP3 or WMA mode). Each preset button’s function is shown on the bottom of the screen.

−

Each time you press and (preset 6), the player

SKIP release skips forward to the beginning of the next track (file in MP3 or WMA mode). Press and release

(preset 5), to skip backward to

the beginning of the current track. Press it again to skip to the beginning of the previous track.

FF/REW a track/file, press and hold

To move rapidly within

−

(preset 4) or

(preset 3).

Press the AUDIO button beside the screen to show the audio display and operate the in-dash disc player.

You can also operate the audio system without using the control icons on the audio screen. Press the CD/AUX button. The status bar appears on the bottom of the screen. On the navigation screen, you can see the audio information whenever you touch the AUDIO INFO or TRACK LIST icons on the lower half of the screen.

When playing a CD recorded with text data, the track, album, and artist name are shown on the audio display. When playing a disc in MP3 or WMA, the folder number and name, the file number and name, the artist name, and the elapsed time are shown. The system will continuously play a disc until you change modes. If the disc was not recorded with text data, it will not be displayed.

208

2010 Insight０８／１２／２７　１１：５３：３０　３１ＴＭ８６００　０２１４　

Playing a Disc (Models with navigation system)

−

To

InMP3orWMAmode FOLDER SELECTION select a different folder, press either side of the TUNE bar to move to the beginning of the next folder. Press the side of the TUNE bar to skip to the next folder, and the side to move to the beginning of the current folder. Press it again to skip to the beginning of the previous folder.

▼

▲

−

TRACK REPEAT (FILE REPEAT) To continuously replay a track (file in MP3 or WMA mode), press and release the RPT button (preset 1). You will see TRACK REPEAT in the display. Press the RPT button again to turn it off.

This feature,

−

InMP3orWMAmode FOLDER REPEAT when activated, replays all files on the selected folder in the order they are compressed. To activate folder repeat, press and hold the RPT button (preset 1) for 2 seconds. You will see FOLDER REPEAT in the display. The system continuously replays the current folder. Press the RPT button again to turn it off. Selecting a different folder with the TUNE bar also turns off folder repeat.

CONTINUED

209

2010 Insight０８／１２／２７　１１：５３：３５　３１ＴＭ８６００　０２１５　

Playing a Disc (Models with navigation system)

−

This

InMP3orWMAmode FOLDER RANDOM feature, when activated, plays all files in the selected folder in random order, rather than in the order they are compressed. To activate folder random, press and hold the RDM button. You will see FOLDER RANDOM in the display. The system then selects and plays files randomly. This continues until you deactivate folder random by pressing the RDM button again, or if you select a different folder with the TUNE bar.

−

SCAN (TRACK/FILE SCAN) The scan function samples all tracks (files in MP3 or WMA) in the order they were recorded. To activate scan, press and release the SCAN button. You will see TRACK SCAN in the display. You will get a 10 second sampling of each track/file on the disc. Press the SCAN button to get out of scan mode and play the last track/file sampled.

Pressing either SKIP button (preset 5 or 6) also turns off scan.

−

TRACK RANDOM (Random within a disc/folder) This feature plays the tracks/files within a disc in random order. To activate track random, press and release the RDM button (preset 2). You will see TRACK RANDOM in the display. Press the RDM button again to return to normal play.

210

2010 Insight０８／１２／２７　１１：５３：４２　３１ＴＭ８６００　０２１６　

Playing a Disc (Models with navigation system)

This feature,

InMP3orWMAmode FOLDER SCAN − when activated, samples all the first files in each folder on the disc in order. To activate folder scan, press and hold the SCAN button for 2
seconds. You will see ‘‘FOLDER SCAN’’ in the display.

The system plays the first file in each folder for about 10 seconds. If you do nothing, the system then plays the first file in each folder for 10 seconds each. After playing the first file of the last folder, the system goes to normal play.

Pressing either SKIP button (preset 5 or 6), selecting a different folder with the TUNE bar, or pressing the SCAN button, also turns off folder scan.

UsingaTrackList

FOLDER ICON

TRACK/FILE ICON

FOLDER NUMBER

RETURN ICON

You can also select a track/file directly from a track list on the audio display. Press the AUDIO button to show the audio display, then touch the Track List icon. The track list menu appears on the display.

CONTINUED

211

2010 Insight０８／１２／２７　１１：５３：４８　３１ＴＭ８６００　０２１７　

Playing a Disc (Models with navigation system)

When playing a CD recorded with text data, each track name is shown on the audio display. With a disc recorded in MP3 or WMA, the folder number and the location are also displayed.

If the disc was not recorded with text data, only the track number is shown.

Select the desired track/file by touching the icon on the display. The selected icon will be highlighted in blue. The system begins to play the selected track/file. With a disc in MP3 or WMA, touch the folder icon on the upper left of the screen to move to the parent folder. The current folder is highlighted in blue.

or

▲ ▼

To scroll through the display, touch the icon on the side of the screen. To go back to the previous display, touch the Return icon on the screen.

To Stop Playing a Disc To play the radio when a disc is playing, press the AM/FM button or touch the FM1, FM2, or AM icon. If a PC card is in the audio unit, touch the CARD icon to play the PC card. Press the CD/AUX button again or touch the CD icon to switch back to the in-dash disc player.

If you turn the system off while a disc is playing, either with the power/volume knob or by turning off the ignition switch, the disc will stay in the drive. When you turn the system back on, the disc will begin playing where it left off.

212

2010 Insight０８／１２／２７　１１：５３：５４　３１ＴＭ８６００　０２１８　

Playing a Disc (Models with navigation system)

Protecting Discs For information on how to handle and protect discs, see page

248

207

RemovingaDisc To remove a disc from the audio unit, fold back the screen by pressing the ). Press OPEN button (see page the disc eject button ( ) to remove the disc. If you eject the disc, but do not remove it from the slot, the system will automatically reload it after 10 seconds and put it in pause mode. To begin playing, press the CD/AUX button.

To return the screen to the upright position, press the CLOSE button.

You cannot close the screen if a disc is partially inserted into its slot.

You can also eject the disc when the ignition switch is off.

213

2010 Insight０８／１２／２７　１１：５４：００　３１ＴＭ８６００　０２１９　

Disc Player Error Messages (Models with navigation system)

Error

Message

Cause

Solution

CHECK DISC

FOCUS Error

MECH ERROR

Mechanical Error

CHECK DISC

Disc Format Error

HEAT ERROR

High Temperature

Press the eject button, and pull out the disc. Check if it is inserted correctly in the disc player. Make sure the disc is not scratched or damaged. Press the eject button, and pull out the disc. Check the disc for damage or deformation. If the disc cannot be pulled out, or the error message does not disappear after the disc is ejected, see your dealer. Press the eject button, and pull out the disc. Check the disc for damage or deformation. Will disappear when the temperature returns to normal.

The chart on the right explains the error messages you may see in the display while playing a disc.

If you see an error message in the display while playing a disc, press the eject button. After ejecting the disc, check it for damage or deformation. If there is no damage, insert the disc again.

The audio system will try to play the disc. If there is still a problem, the error message will reappear. Press the eject button, and pull out the disc.

Insert a different disc. If the new disc plays, there is a problem with the first disc. If the error message cycle repeats and you cannot clear it, take your vehicle to a dealer.

214

2010 Insight０８／１２／２７　１１：５４：０５　３１ＴＭ８６００　０２２０　

Playing a PC Card (Models with navigation system)

POWER/VOLUME KNOB

PC CARD ICON

TRACK LIST ICON

OPEN BUTTON

CD/AUX BUTTON

AUDIO BUTTON

SCAN BUTTON

TUNE BAR

JOYSTICK

PLAY MODE ICON

REPEAT BUTTON

REWIND BUTTON

SKIP

−

BUTTON

RANDOM BUTTON

FAST FORWARD BUTTON

SKIP

＋

BUTTON

215

2010 Insight０８／１２／２７　１１：５４：１４　３１ＴＭ８６００　０２２１　

Playing a PC Card (Models with navigation system)

To Play a PC Card You operate the PC card player with