Login- Download PDF Manual
-
Index
Home
* Not available on all models
245
2013 CR-Z 13 CR-Z-31SZT6200.book 246 ページ ２０１２年１０月２５日 木曜日 午後９時９分
uuReplacing Light BulbsuFront Turn Signal/Parking*/Side Marker Light Bulbs
QRG
Front Turn Signal/Parking*/Side Marker Light Bulbs When replacing, use the following bulbs. Front Turn Signal/Parking/Side Marker Light: 28W/8 W
1. Turn the socket to the left and remove it,
then remove the old bulb.
2. Insert a new bulb.
Models with LED type parking/daytime running lights Parking/Daytime Running Light Bulbs Parking/daytime running light bulbs are LED type. Have an authorized Honda dealer inspect and replace the light bulbs.
Side Turn Signal/Emergency Indicator Light Bulbs Door mirrors have the side turn signal lights. Have an authorized Honda dealer inspect and replace the light bulbs.
* Not available on all models
TOC
Index
Home
246
2013 CR-Z 13 CR-Z-31SZT6200.book 247 ページ ２０１２年１０月２５日 木曜日 午後９時９分
uuReplacing Light BulbsuBack-Up Light, Rear Turn Signal Light and Rear Side Marker Light Bulbs
QRG
Back-Up Light, Rear Turn Signal Light and Rear Side Marker Light Bulbs When replacing, use the following bulbs. Back-Up Light: 16 W Rear Turn Signal Light: 21 W (Amber) Rear Side Marker Light: 3 CP
1. Pry on the edge of the cover using a flat-tip
screwdriver to remove the cover. uWrap the flat-tip screwdriver with a cloth
to prevent scratches.
Cover
2. Remove the bolts.
3. Pull the light assembly out of the rear pillar.
TOC
Index
Home
Continued
247
2013 CR-Z 13 CR-Z-31SZT6200.book 248 ページ ２０１２年１０月２５日 木曜日 午後９時９分
uuReplacing Light BulbsuBrake/Taillight Bulbs
4. Turn the socket to the left and remove it,
then remove the old bulb.
5. Insert a new bulb.
Guide
6. Reinstall the light assembly by sliding it on
to the guide on the body.
Brake/Taillight Bulbs Brake/rear taillight bulbs are LED type. Have an authorized Honda dealer inspect and replace the light bulbs.
QRG
TOC
Index
Home
248
2013 CR-Z 13 CR-Z-31SZT6200.book 249 ページ ２０１２年１０月２５日 木曜日 午後９時９分
uuReplacing Light BulbsuRear License Plate Light Bulbs
QRG
Rear License Plate Light Bulbs When replacing, use the following bulb. Rear License Plate Light: 5 W
1. Remove the lens by prying on the edge of
the lens using a flat-tip screwdriver. uWrap the flat-tip screwdriver with a cloth
to prevent scratches.
2. Remove the old bulb and insert a new bulb.
TOC
Index
Home
High-Mount Brake Light Bulbs High-mount brake light bulbs are LED type. Have an authorized Honda dealer inspect and replace the light bulbs.
249
2013 CR-Z 13 CR-Z-31SZT6200.book 250 ページ ２０１２年１０月２５日 木曜日 午後９時９分
Checking and Maintaining Wiper Blades
QRG
Checking Wiper Blades If the wiper blade rubber has deteriorated, it will leave streaks and the metal wiper arm may scratch the window glass.
Changing the Front Wiper Blade Rubber
1Changing the Front Wiper Blade Rubber
1. Lift the driver side wiper arm first, then the
passenger side.
NOTICE Avoid dropping the wiper arm; it may damage the windshield.
2. Push the lock tab up.
3. Slide the blade from the wiper arm.
Lock Tab
TOC
Index
Home
250
2013 CR-Z 13 CR-Z-31SZT6200.book 251 ページ ２０１２年１０月２５日 木曜日 午後９時９分
uuChecking and Maintaining Wiper BladesuChanging the Front Wiper Blade Rubber
Blade
Retainer
Blade
Indent
QRG
TOC
Index
Home
4. Slide the wiper blade out from its holder by
pulling the tabbed end out.
5. Remove the retainer from the rubber blade
that has been removed, and mount to a new rubber blade. u Correctly align the rubber protrusion and
the retainer grooves.
6. Slide the new wiper blade onto the holder
from the bottom end. u The tab on the holder should fit in the
indent of the wiper blade.
7. Slide the wiper blade onto the wiper arm,
then push down the lock tab.
8. Lower the passenger side wiper arm first,
then the driver side.
251
2013 CR-Z 13 CR-Z-31SZT6200.book 252 ページ ２０１２年１０月２５日 木曜日 午後９時９分
uuChecking and Maintaining Wiper BladesuChanging the Rear Wiper Blade Rubber
QRG
Changing the Rear Wiper Blade Rubber 1. Raise the wiper arm off.
2. Slide the wiper blade out from the wiper
arm while pushing the lock tab.
1Changing the Rear Wiper Blade Rubber
NOTICE Avoid dropping the wiper arm; it may damage the rear window.
3. Slide the wiper blade out from its holder by
pulling the tabbed end out.
4. Remove the retainer from wiper blade and
mount it to a new rubber blade.
5. Slide the wiper blade onto the holder.
u Make sure it is engaged correctly, then install the wiper blade assembly onto the wiper arm.
TOC
Tabbed End
Index
Home
252
2013 CR-Z 13 CR-Z-31SZT6200.book 253 ページ ２０１２年１０月２５日 木曜日 午後９時９分
Checking and Maintaining Tires
QRG
Checking Tires To safely operate your vehicle, your tires must be of the proper type and size, in good condition with adequate tread, and properly inflated.
■ Inflation guidelines Properly inflated tires provide the best combination of handling, tread life, and comfort. Refer to the driver’s doorjamb label or specification’s page for the specified pressure.
Underinflated tires wear unevenly, adversely affect handling and fuel economy, and are more likely to fail from overheating. Overinflated tires make your vehicle ride harshly, are more prone to road hazards, and wear unevenly.
Every day before you drive, look at each of the tires. If one looks lower than the others, check the pressure with a tire gauge.
At least once a month or before long trips, use a gauge to measure the pressure in all tires, including the spare *. Even tires in good condition can lose 1 to 2 psi (10 to 20 kPa, 0.1 to 0.2 kgf/cm2) per month.
TOC
■ Inspection guidelines Every time you check inflation, also examine the tires and valve stems. Look for: • Bumps or bulges on the side or in the tread. Replace the tire if you find any cuts,
splits, or cracks in the side of the tire. Replace it if you see fabric or cord.
• Remove any foreign objects and inspect for air leaks. • Uneven tread wear. Have a dealer check the wheel alignment. • Excessive tread wear.
Index
2 Wear Indicators P. 258
Home
• Cracks or other damage around valve stem.
* Not available on all models
1Checking Tires
3WARNING
Using tires that are excessively worn or improperly inflated can cause a crash in which you can be seriously hurt or killed.
Follow all instructions in this owner’s manual regarding tire inflation and maintenance.
Measure the air pressure when tires are cold. This means the vehicle has been parked for at least three hours, or driven less than 1 mile (1.6 km). If necessary, add or release air until the specified pressure is reached.
If checked when hot, tire pressure can be as much as 4–6 psi (30–40 kPa, 0.3–0.4 kgf/cm2) higher than if checked when cold.
Have a dealer check the tires if you feel a consistent vibration while driving. New tires and any that have been removed and reinstalled should be properly balanced.
253
2013 CR-Z 13 CR-Z-31SZT6200.book 254 ページ ２０１２年１０月２５日 木曜日 午後９時９分
uuChecking and Maintaining TiresuTire and Loading Information Label
QRG
Tire and Loading Information Label The label attached to the driver’s doorjamb provides necessary tire and loading information.
Label Example
Tire Labeling
Example
Tire Size Tire Identification Number (TIN)
Maximum Tire Load
Maximum Tire Pressure
Tire Size
The tires that came on your vehicle have a number of markings. Those you should be aware of are described below.
■ Tire Size Whenever tires are replaced, they should be replaced with tires of the same size.
TOC
Index
Home
254
1Tire and Loading Information Label
The tire and loading information label attached to the driver’s doorjamb contains: a The number of people your vehicle can carry. b The total weight your vehicle can carry. Do not c The original tire sizes for front, rear, and spare. d The proper cold tire pressure for front, rear, and
exceed this weight.
spare.
1Tire Size
Following is an example of tire size with an explanation of what each component means. P195/55 R16 86V P: 195: Tire width in millimeters. 55: Aspect ratio (the tire’s section height as a
Vehicle type (P indicates passenger vehicle).
percentage of its width). Tire construction code (R indicates radial).
R: 16: Rim diameter in inches. 86: Load index (a numerical code associated with the
V:
maximum load the tire can carry). Speed symbol (an alphabetical code indicating the maximum speed rating).
2013 CR-Z 13 CR-Z-31SZT6200.book 255 ページ ２０１２年１０月２５日 木曜日 午後９時９分
uuChecking and Maintaining TiresuTire Labeling
1Tire Identification Number (TIN)
DOT B97R FW6X 2209
DOT: This indicates that the tire meets allrequirements of the U.S. Department of Transportation.
B97R: Manufacturer's identification mark. FW6X: Tire type code. 22 09: Date of manufacture.
Year Week
■ Tire Identification Number (TIN) The tire identification number (TIN) is a group of numbers and letters that look like the example in the side column. TIN is located on the sidewall of the tire.
■ Glossary of Tire Terminology Cold Tire Pressure – The tire air pressure when the vehicle has been parked for at least three hours or driven less than 1 mile (1.6 km). Load Rating – Means the maximum load that a tire is rated to carry for a given inflation pressure. Maximum Inflation Pressure – The maximum tire air pressure that the tire can hold. Maximum Load Rating – Means the load rating for a tire at the maximum permissible inflation pressure for that tire. Recommended Inflation Pressure – The cold tire inflation pressure recommended by the manufacturer. Treadwear Indicators (TWI) – Means the projections within the principal grooves designed to give a visual indication of the degrees of wear of the tread.
QRG
TOC
Index
Home
255
2013 CR-Z 13 CR-Z-31SZT6200.book 256 ページ ２０１２年１０月２５日 木曜日 午後９時９分
uuChecking and Maintaining TiresuDOT Tire Quality Grading (U.S. Vehicles)
QRG
DOT Tire Quality Grading (U.S. Vehicles)
The tires on your vehicle meet all U.S. Federal Safety Requirements. All tires are also graded for treadwear, traction, and temperature performance according to Department of Transportation (DOT) standards. The following explains these gradings.
■ Uniform Tire Quality Grading Quality grades can be found where applicable on the tire sidewall between tread houlder and maximum section width.
■ Treadwear
The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wear one and one-half (1 1/2) imes as well on the government course as a tire graded 100. The relative performance of tires depends upon the actual conditions of their use, however, and may depart significantly from the norm due to variations in driving habits, service practices and differences in road characteristics and climate.
1Uniform Tire Quality Grading
For example: Treadwear 200
Traction AA Temperature AAll passenger car tires must conform to Federal Safety Requirements in addition to these grades.
TOC
Index
Home
256
2013 CR-Z 13 CR-Z-31SZT6200.book 257 ページ ２０１２年１０月２５日 木曜日 午後９時９分
uuChecking and Maintaining TiresuDOT Tire Quality Grading (U.S. Vehicles)
1Traction
Warning: The traction grade assigned to this tire is abased on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristics.
1Temperature
Warning: The temperature grade for this tire is established for a tire that is properly inflated and not overloaded. Excessive speed, underinflation, or excessive loading, either separately or in combination, can cause heat buildup and possible tire failure.
QRG
■ Traction
The traction grades, from highest to lowest, are AA, A, B, and C. Those grades represent the tire's ability to stop on wet pavement as measured under controlled conditions on specified government test surfaces of asphat and concrete. A tire marked C may have poor traction performance.
■ Temperature
The temperature grades are A (the highest), B, and C, representing the tire's resistance to the generation of heat and its ability to dissipate heate when te sted under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure. The grade C corresponds to a level of performance which all passenger car tires must meet under the Federal Motor Vehicle Safety Standard No. 109. Grades B and A represent higher levels of performance on the laboratory test wheel than the minimum required by law.
TOC
Index
Home
257
2013 CR-Z 13 CR-Z-31SZT6200.book 258 ページ ２０１２年１０月２５日 木曜日 午後９時９分
uuChecking and Maintaining TiresuWear Indicators
QRG
Wear Indicators
Example of a Wear Indicator mark
The groove where the wear indicator is located is 1/16 inch (1.6 mm) shallower than elsewhere on the tire. If the tread has worn so that the indicator is exposed, replace the tire. Worn out tires have poor traction on wet roads.
Tire Service Life The life of your tires is dependent on many factors, including driving habits, road conditions, vehicle loading, inflation pressure, maintenance history, speed, and environmental conditions (even when the tires are not in use).
In addition to regular inspections and inflation pressure maintenance, it is recommended that you have annual inspections performed once the tires reach five years old. All tires, including the spare, should be removed from service after 10 years from the date of manufacture, regardless of their condition or state of wear.
TOC
Index
Home
258
2013 CR-Z 13 CR-Z-31SZT6200.book 259 ページ ２０１２年１０月２５日 木曜日 午後９時９分
uuChecking and Maintaining TiresuTire and Wheel Replacement
QRG
Tire and Wheel Replacement Replace your tires with radials of the same size, load range, speed rating, and maximum cold tire pressure rating (as shown on the tire’s sidewall). Using tires of a different size or construction can cause the ABS and VSA® (vehicle stability assist) system to work incorrectly.
It is best to replace all four tires at the same time. If that isn’t possible, replace the front or rear tires in pairs.
Make sure that the wheel’s specifications match those of the original wheels.
U.S. models only If you replace a wheel, only use TPMS specified wheels approved for your vehicle.
1Tire and Wheel Replacement
3WARNING
Installing improper tires on your vehicle can affect handling and stability. This can cause a crash in which you can be seriously hurt or killed.
Always use the size and type of tires recommended in this owner’s manual.
TOC
Index
Home
259
2013 CR-Z 13 CR-Z-31SZT6200.book 260 ページ ２０１２年１０月２５日 木曜日 午後９時９分
uuChecking and Maintaining TiresuTire Rotation
QRG
Tire Rotation Rotating tires according to the maintenance messages on the multi-information display helps to distribute wear more evenly and increase tire life.
■ Tires without rotation marks
Rotate the tires as shown here.
1Tire Rotation
Tires with directional tread patterns should only be rotated front to back (not from one side to the other). Directional tires should be mounted with the rotation indication mark facing forward, as shown below.
FRONT
Direction Mark
Rotate the tires as shown here.
When the tires are rotated, make sure the air pressures are checked.
Front
■ Tires with rotation marks
Front
TOC
Index
Home
260
2013 CR-Z 13 CR-Z-31SZT6200.book 261 ページ ２０１２年１０月２５日 木曜日 午後９時９分
QRG
Winter Tires If driving on snowy or frozen roads, mount all season marked M+S tires, snow tires, or tire chains; reduce speed; and maintain sufficient distance between vehicles when driving.
Be particularly careful when operating the steering wheel or brakes to prevent skidding.
Use tire chains, snow tires, or all season tires when necessary or according to the law.
When mounting, refer to the following points.
For winter tires: • Select the size and load ranges that are the same as the original tires. • Mount the tires to all four wheels.
For tire chains: • Install them on the front tires only. • Because your vehicle has limited tire clearance, we strongly recommend using the
chains listed below: Models with P195/55 R16 tires Cable-type: SCC Radial Chain SC1030
Models with 205/45 R17 tires Not recommended to use any type of chains
*1
*1:On 205/45R17 tires, you cannot install any type of tire chains. If you have to use tire chains, replace
the original tires with the 195/55R16 tires.
• Follow the chain manufacturer's instruction when installing. Mount them as
tightly as you can.
• Check that the chains do not touch the brake lines or suspension. • Drive slowly.
TOC
Index
Home
uuChecking and Maintaining Tires uWinter Tires
1Winter Tires
3WARNING
Using the wrong chains, or not properly installing chains, can damage the brake lines and cause a crash in which you can be seriously injured or killed.
Follow all instructions in this owner's manual regarding the selection and use of tire chains.
NOTICE Traction devices that are the wrong size or improperly installed can damage your vehicle's brake lines, suspension, body, and wheels. Stop driving if they are hitting any part of the vehicle.
When tire chains are mounted, follow the chain manufacturer's instructions regarding vehicle operational limits.
If your vehicle is equipped with summer tires, be aware that these tires are not designed for winter driving conditions. For more information, contact a dealer.
261
2013 CR-Z 13 CR-Z-31SZT6200.book 262 ページ ２０１２年１０月２５日 木曜日 午後９時９分
12 Volt Battery
QRG
Checking the 12 Volt Battery
Test Indicator Window
Check the battery condition monthly. Look at the test indicator window and check the terminals for corrosion.
112 Volt Battery
3WARNING
If your vehicle's battery is disconnected or goes dead: • The audio system is disabled.
2 Reactivating the audio system P. 141
• The clock resets.
2 Setting the Clock P. 98
• The navigation system * is disabled. A PIN code will be required.
2 Refer to the navigation system manual
Charging the 12 Volt Battery Disconnect both battery cables to prevent damaging your vehicle's electrical system. Always disconnect the negative (-) cable first, and reconnect it last.
* Not available on all models
TOC
Index
Home
262
The battery gives off explosive hydrogen gas during normal operation.
A spark or flame can cause the battery to explode with enough force to kill or seriously hurt you.
When conducting any battery maintenance, wear protective clothing and a face shield, or have a skilled technician do it.
WARNING: Battery post, terminals, and related accessories contain lead and lead compounds. Wash your hands after handling.
The test indicator's color information is on the battery.
When you find corrosion, clean the battery terminals by applying a baking powder and water solution. Clean terminals with a damp towel. Cloth/towel dry the battery. Coat the terminals with grease to help prevent future corrosion.
2013 CR-Z 13 CR-Z-31SZT6200.book 263 ページ ２０１２年１０月２５日 木曜日 午後９時９分
Remote Transmitter Care
QRG
Replacing the Button Battery If the indicator does not come on when the button is pressed, replace the battery.
1Replacing the Button Battery
Battery type: CR1616
1. Unscrew the cover with a small Phillips- head screwdriver. Press a button to pry open the transmitter.
NOTICE An improperly disposed of battery can damage the environment. Always confirm local regulations for battery disposal.
Replacement batteries are commercially available or at a dealer.
Keypad
Battery
Screw
2. Open the keypad.
u Wrap the small flat-tip screwdriver with a
cloth to prevent scratching the transmitter.
3. Make sure to replace the battery with the
correct polarity.
TOC
Index
Home
263
2013 CR-Z 13 CR-Z-31SZT6200.book 264 ページ ２０１２年１０月２５日 木曜日 午後９時９分
Climate Control System Maintenance
QRG
Dust and Pollen Filter The Climate Control system is equipped with a dust and pollen filter that collects pollen, dust, and other debris in the air. The Maintenance MinderTM messages will let you know when to replace the filter.
We recommend that you replace the dust and pollen filter sooner when using your vehicle in areas with high concentrations of dust.
1Dust and Pollen Filter
If the airflow from the climate control system deteriorates noticeably, and the windows fog up easily, the filter may need to be replaced. Please contact a dealer for replacement.
TOC
Index
Home
264
2013 CR-Z 13 CR-Z-31SZT6200.book 265 ページ ２０１２年１０月２５日 木曜日 午後９時９分
Cleaning
QRG
Interior Care Use a damp cloth with a mixture of mild detergent and warm water to remove dirt. Use a clean cloth to remove detergent residue.
1Interior Care
Do not spill liquids inside the vehicle.
■ Cleaning Seat Belts Use a soft brush with a mixture of mild soap and warm water to clean the seat belts. Let the belts air dry. Wipe the openings of the seat belt anchors using a clean cloth.
Opening
Electrical devices and systems may malfunction if liquids are splashed on them.
Do not use silicone based sprays on electrical devices such as audio devices and switches.
Doing so may cause the items to malfunction or a fire inside the vehicle.
If a silicone based spray is inadvertently used on electrical devices, consult a dealer.
Depending on their composition, chemicals and liquid aromatics may cause discoloration, wrinkles, and cracking to resin-based parts and textiles. Do not use alkali solvents or organic solvents such as benzene or gasoline.
After using chemicals, make sure to gently wipe them off using a dry cloth.
Do not place used cloths on top of resin based parts or textiles for long periods of time without washing.
TOC
Index
Home
Continued
265
2013 CR-Z 13 CR-Z-31SZT6200.book 266 ページ ２０１２年１０月２５日 木曜日 午後９時９分
uuCleaninguInterior Care
QRG
■ Floor Mats
Driver’s floor mat is shown.
Unlock
Lock
1Floor Mats
If you use any floor mats that were not originally provided with your vehicle, make sure they are designed for your specific vehicle, fit correctly, and are securely anchored by the floor anchors.
The driver’s floor mat hooks over the floor anchors, which keep the mat from sliding forward. To remove a mat for cleaning, turn the anchor knobs to the unlock position. When reinstalling the mat after cleaning, turn the knobs to the lock position.
Do not put additional floor mats on top of the anchored mat.
■ Maintaining Genuine Leather* Vacuum dirt and dust from the leather frequently. Pay close attention to the pleats and seams. Clean the leather with a soft cloth dampened with a 90% water and 10% neutral soap solution. Then buff it with a clean, dry cloth. Remove any dust or dirt on leather surfaces immediately.
* Not available on all models
TOC
Index
Home
266
2013 CR-Z 13 CR-Z-31SZT6200.book 267 ページ ２０１２年１０月２５日 木曜日 午後９時９分
QRG
Exterior Care Dust off the vehicle body after you drive. Regularly inspect your vehicle for scratches on painted surfaces. A scratch on a painted surface can result in body rust. If you find a scratch, promptly repair it.
uuCleaninguExterior Care
■ Washing the Vehicle Wash the vehicle regularly. Wash more frequently when driving in the following conditions: • If driving on roads with road salt.
• If driving in coastal areas.
• If tar, soot, bird droppings, insects, or tree sap are stuck to painted surfaces.
■ Using an Automated Car Wash Fold in the door mirrors. Make sure to follow the instructions indicated on the automated car wash.
■ Using High Pressure Cleaners • Keep sufficient distance between the cleaning nozzle and the vehicle body.
• Take particular care around the windows. Standing too close may cause water to
enter the vehicle interior. Do not spray water into the engine compartment.
1Washing the Vehicle
Do not spray water into the air intake vents or engine compartment. It can cause a malfunction.
Air Intake Vents
Do not spray water onto the fuel fill door directly. A high-pressure spray may cause it to open.
TOC
Index
Home
Continued
267
2013 CR-Z 13 CR-Z-31SZT6200.book 268 ページ ２０１２年１０月２５日 木曜日 午後９時９分
uuCleaninguExterior Care
QRG
■ Applying Wax A good coat of automotive body wax helps protect your vehicle’s paint from the elements. Wax will wear off over time and expose your vehicle’s paint to the elements, so reapply as necessary.
1Applying Wax
NOTICE Chemical solvents and strong cleaners can damage the paint, metal, and plastic on your vehicle. Wipe up spills immediately.
■ Maintaining the Bumpers and Other Resin Coated Parts If you get gasoline, oil, engine coolant, or battery fluid on resin coated parts, they may be stained or the coating may peel. Promptly wipe it away using a soft cloth and clean water.
1Maintaining the Bumpers and Other Resin Coated Parts
Ask a dealer about the correct coating material when you want to repair the painted surface of the parts made of resin.
■ Cleaning the Window Wipe using a glass cleaner.
■ Maintaining Aluminum Wheels Aluminum is susceptible to deterioration caused by salt and other road contaminants. Use a sponge and mild detergent to wipe away promptly. Be careful not to use harsh chemicals (including some commercial wheel cleaners) or a stiff brush. They can damage the clear coat of the aluminum alloy wheels that helps keep the aluminum from corroding and tarnishing.
1Cleaning the Window
Wires are mounted to the inside of the rear window. Wipe along the same direction as the wires with a soft cloth so as not to damage them.
TOC
Index
Home
268
2013 CR-Z 13 CR-Z-31SZT6200.book 269 ページ ２０１２年１０月２５日 木曜日 午後９時９分
QRG
Index
Home
Tools
Types of Tools.................................. 270
If a Tire Goes Flat
Changing a Flat Tire* ....................... 271
Temporarily Repairing a Flat Tire....... 277Engine Does Not Start
Checking the Engine........................ 286
Jump Starting.................................... 287
Shift Lever Does Not Move.............. 289
OverheatingHow to Handle Overheating............. 290
Handling the Unexpected
This chapter explains how to handle unexpected troubles.
Indicator, Coming On/Blinking
292
If the Low Oil Pressure Indicator Comes On ................................. If the Charging System Indicator Comes On ..................................... If the Malfunction Indicator Lamp Comes On or Blinks ....................... If the Brake System Indicator (Red) 295
Comes On ..................................... If the EPS System Indicator Comes On.. 295
If the IMA Indicator Comes On......... 296294
293
If the Low Tire Pressure/TPMS Indicator Comes On or Blinks ....................... 296
Fuses
Fuse Locations ............................... Inspecting and Changing Fuses........
. 297
300
Emergency Towing........................... 301
When You Cannot Open the Hatch .....303* Not available on all models
269
2013 CR-Z 13 CR-Z-31SZT6200.book 270 ページ ２０１２年１０月２５日 木曜日 午後９時９分
Tools
QRG
Types of Tools
1Types of Tools
The tools were stored in the cargo area.
Wheel Nut Wrench/Jack Handle
Jack Handle Bar
Detachable Towing Hook
Repair Kit
Jack
TOC
Index
Home
270
2013 CR-Z 13 CR-Z-31SZT6200.book 271 ページ ２０１２年１０月２５日 木曜日 午後９時９分
If a Tire Goes Flat
QRG
Changing a Flat Tire* If a tire goes flat while driving, grasp the steering wheel firmly, and brake gradually to reduce speed. Then, stop in a safe place. Replace the flat tire with a compact spare tire. Go to a dealer as soon as possible to have the full-size tire repaired or replaced.
1. Park the vehicle on firm, level, and non-slippery surface and apply the
parking brake.
Automatic transmission (CVT) models 2. Move the shift lever to (P.
Manual transmission models 2. Move the shift lever to (R.
All models 3. Turn on the hazard warning lights and turn the ignition switch to LOCK (0.
TOC
Index
Home
1Changing a Flat Tire*
Follow compact spare precautions:
Periodically check the tire pressure of the compact spare. It should be set to the specified pressure. Specified Pressure: 60 psi (420 kPa, 4.2 kgf/cm2)
When driving with the compact spare tire, keep the vehicle speed under 50 mph (80 km/h). Replace with a full-size tire as soon as possible.
The compact spare tire and wheel in your vehicle are specifically for this model. Do not use them with another vehicle.
Do not use another type of compact spare tire or wheel with your vehicle.
Do not mount tire chains on a compact spare tire. If a chain-mounted front tire goes flat, remove one of the full-size rear tires and replace it with the compact spare tire. Remove the flat front tire and replace it with the full-size tire that was removed from the rear. Mount the tire chains on the front tire.
NOTICE Do not use a puncture-repairing agent, other than the one provided in the kit that came with your vehicle. If used, you may permanently damage the tire pressure sensor.
* Not available on all models
Continued
271
2013 CR-Z 13 CR-Z-31SZT6200.book 272 ページ ２０１２年１０月２５日 木曜日 午後９時９分
uuIf a Tire Goes FlatuChanging a Flat Tire
■ Getting Ready to Replace the Flat Tire
1. Pull the strap on the cargo area floor lid and
open the lid.
Cover
2. Remove the cover from the compact
spare tire.
Compact Spare Tire
Tool Case
3. Take the jack, jack handle bar, and wheel
nut wrench out of the tool case.
4. Unscrew the wing bolt, and remove the spacer cone. Then, remove the compact spare tire.
QRG
TOC
Index
Home
272
2013 CR-Z 13 CR-Z-31SZT6200.book 273 ページ ２０１２年１０月２５日 木曜日 午後９時９分
uuIf a Tire Goes FlatuChanging a Flat Tire
5. Place a wheel block or rock in front and rear
of the wheel diagonal to the flat tire.
The tire to be replaced.
Wheel Blocks
6. Place the compact spare tire (wheel side up)
under the vehicle body, near the tire that needs to be replaced.
7. Loosen each wheel nut about one turn
using the wheel nut wrench.
QRG
TOC
Index
Home
Continued
273
2013 CR-Z 13 CR-Z-31SZT6200.book 274 ページ ２０１２年１０月２５日 木曜日 午後９時９分
uuIf a Tire Goes FlatuChanging a Flat Tire
QRG
■ How to Set Up the Jack
1. Place the jack under the jacking point
closest to the tire to be changed.
2. Turn the end bracket (as shown in the
image) clockwise until the top of the jack contacts the jacking point. u Make sure that the jacking point tab is
resting in the jack notch.
3. Raise the vehicle, using the jack handle bar and the jack handle, until the tire is off the ground.
TOC
Index
Home
274
Jack Handle Bar
Wheel Nut Wrench as Jack Handle
1How to Set Up the Jack
3WARNING
The vehicle can easily roll off the jack, seriously injuring anyone underneath.
Follow the directions for changing a tire exactly, and never get under the vehicle when it is supported only by the jack.
Do not use the jack with people or luggage in the vehicle.
Use the jack provided in your vehicle. Other jacks may not support the weight (“load”) or their shape may not match.
The following instructions must be followed to use the jack safely. • Do not use while the engine is running. • Use only where the ground is firm and level. • Use only at the jacking points. • Do not get in the vehicle while using the jack. • Do not put anything on top of or underneath the
jack.
2013 CR-Z 13 CR-Z-31SZT6200.book 275 ページ ２０１２年１０月２５日 木曜日 午後９時９分
QRG
■ Replacing the Flat Tire
1. Remove the wheel nuts and flat tire.
1Replacing the Flat Tire
Do not over tighten the wheel nuts by applying extra torque using your foot or a pipe.
uuIf a Tire Goes FlatuChanging a Flat Tire
TOC
Index
Home
2. Wipe the mounting surfaces of the wheel
with a clean cloth.
3. Mount the compact spare tire.
4. Screw the wheel nuts until they touch
the lips around the mounting holes, and stop rotating.
5. Lower the vehicle and remove the jack.
Tighten the wheel nuts in the order indicated in the image. Go around, tightening the nuts, two to three times in this order.
Wheel nut torque: 80 lbf∙ft (108 N∙m, 11 kgf∙m)
Continued
275
2013 CR-Z 13 CR-Z-31SZT6200.book 276 ページ ２０１２年１０月２５日 木曜日 午後９時９分
uuIf a Tire Goes FlatuChanging a Flat Tire*
QRG
■ Storing the Flat Tire
For normal tire
1. Remove the center cap.
Wing Bolt
Spacer Cone
2. Place the flat tire face down in the compact
spare tire well.
3. Remove the spacer cone from the wing
bolt, flip it over, and insert it back on the bolt. Secure the flat tire with the wing bolt.
4. Securely put the jack and wheel nut wrench
back in the tool case in the cargo area.
For compact spare tire
■ TPMS and the Compact Spare Tire
U.S. models only If you replace a flat tire with the spare tire, the low tire pressure/TPMS indicator comes on while you are driving. After driving for a few miles (kilometers), the indicator will start blinking for a short time and then stay on. CHECK TPMS SYSTEM appears on the multi-information display, but this is normal.
If you replace the tire with a specified regular tire, the warning message on the multi-information display and the low tire pressure/TPMS indicator will go off after a few miles (kilometers).
TOC
Index
Home
276
1Storing the Flat Tire
3WARNING
Loose items can fly around the interior in a crash and can seriously injure the occupants. Store the wheel, jack, and tools securely before driving.
1TPMS and the Compact Spare Tire
The system cannot monitor the pressure of the compact spare tire. Manually check the compact spare tire pressure to be sure that it is correct.
Use TPMS specific wheels. Each is equipped with a tire pressure sensor mounted inside the tire behind the valve stem.
2013 CR-Z 13 CR-Z-31SZT6200.book 277 ページ ２０１２年１０月２５日 木曜日 午後９時９分
QRG
Temporarily Repairing a Flat Tire This vehicle is not equipped with a spare tire. If the tire has a large cut or is otherwise severely damaged, you will need to have the vehicle towed. If the tire only has a small puncture, from a nail for instance, you can use the temporary tire repair kit so that you can drive to the nearest service station for a more permanent repair.
If a tire goes flat while driving, grasp the steering wheel firmly, and brake gradually to reduce speed. Then stop in a safe place.
1. Park the vehicle on firm, level, and non-slippery surface, and apply the
parking brake.
Automatic transmission (CVT) models 2. Move the shift lever to (P.
Manual transmission models 2. Move the shift lever to (R.
All models 3. Turn on the hazard warning lights and turn the ignition switch to LOCK (0.
■ Getting Ready to Temporarily Repair the Flat Tire
Pressure Relief Button Repair Notification Label
Pressure Gauge
Inflator Switch
Speed Restriction Label
Sealant/Air Hose (Clear)
Power Plug
Side Cover
Air Only Hose (Black)
Continued
TOC
Index
Home
uuIf a Tire Goes FlatuTemporarily Repairing a Flat Tire
1Temporarily Repairing a Flat Tire
The kit should not be used in the following situations. Instead, contact a dealer or a roadside assistant to have the vehicle towed. • The tire sealant has expired. • More than two tires are punctured. • The puncture or cut is larger than 3/16 inch (4 mm). • The tire side wall is damaged or the puncture is
outside the contact area.
When the puncture is: Smaller than 3/16 inch (4 mm) Larger than 3/16 inch (4 mm)
Kit Use
Yes
No
Contact Area
• Damage has been caused by driving with the tire
extremely under inflated.
• The tire bead is no longer seated. • The rim is damaged.
Do not remove a nail or screw that punctured the tire. If you remove it from the tire, you may not be able to repair the puncture using the kit.
NOTICE Do not use a puncture-repairing agent other than the one provided in the kit that came with your vehicle. If a different agent is used, you may permanently damage the tire pressure sensor.
277
2013 CR-Z 13 CR-Z-31SZT6200.book 278 ページ ２０１２年１０月２５日 木曜日 午後９時９分
uuIf a Tire Goes FlatuTemporarily Repairing a Flat Tire
1. Pull the strap and take the kit out of the
1Getting Ready to Temporarily Repair the Flat Tire
case.
When making a temporary repair, carefully read the instruction manual provided with the kit.
Tire Repair Kit
2. Place the kit upright, on flat ground near the flat tire, and away from traffic. Do not place the kit on its side.
QRG
TOC
Index
Home
278
2013 CR-Z 13 CR-Z-31SZT6200.book 279 ページ ２０１２年１０月２５日 木曜日 午後９時９分
uuIf a Tire Goes FlatuTemporarily Repairing a Flat Tire
■ Injecting Sealant and Air
1Injecting Sealant and Air
Valve Cap
1. Remove the valve cap from the tire valve
stem.
Valve Stem
2. Remove the sealant/air hose (clear) from
the packaging.
Sealant/Air Hose (Clear)
Sealant/Air Hose
3. Attach the sealant/air hose onto the tire
valve stem. Screw it until it is tight.
3WARNING
Tire sealant contains substances that are harmful and can be fatal if swallowed.
If accidentally swallowed, do not induce vomiting. Drink plenty of water and get medical attention immediately.
For skin or eye contact, flush with cool water and get medical attention if necessary.
In cold temperatures, the sealant may not flow easily. In this situation, warm it up for five minutes before using.
The sealant can permanently stain clothing and other materials. Be careful during handling and wipe away any spills immediately.
QRG
TOC
Index
Valve Stem
Home
Continued
279
2013 CR-Z 13 CR-Z-31SZT6200.book 280 ページ ２０１２年１０月２５日 木曜日 午後９時９分
uuIf a Tire Goes FlatuTemporarily Repairing a Flat Tire
Inflator Switch
QRG
TOC
Index
Home
280
4. Remove the side cover, then pull out the
1Injecting Sealant and Air
power plug.
5. Plug in the compressor to the accessory
power socket. u Be careful not to pinch the cord in a
door or window.
6. Start the engine.
u Keep the engine running while injecting
sealant and air. 2 Carbon Monoxide Gas P. 62
7. Press the inflator switch to turn on the
compressor. u The compressor starts injecting sealant
and air into the tire.
8. Continue to add air after the sealant
injection is complete.
9. After the air pressure reaches the required
pressure, turn off the inflator switch. u To check the pressure, occasionally turn off the compressor and read the gauge.
3WARNING
Running the engine with the vehicle in an enclosed or even partly enclosed area can cause a rapid build-up of toxic carbon monoxide. Breathing this colorless, odorless gas can cause unconsciousness and even death. Only run the engine to power the air compressor with the vehicle outdoors.
NOTICE Do not operate the temporary tire repair kit compressor for more than 15 minutes. The accessory power socket and compressor can overheat and become permanently damaged.
There is an accessory power socket in the front console panel.
2 Accessory Power Socket P. 129
Until the sealant injection is complete, the pressure shown on the pressure gauge will appear higher than actual. After the sealant injection is complete the pressure will drop and then begin to rise again as the tire is inflated with air. This is normal. To accurately measure the air pressure using the gauge, turn the air compressor off only after the sealant injection is complete.
See the driver’s doorjamb or the specifications in this manual for the required air pressure.
2 Specifications P. 306
2013 CR-Z 13 CR-Z-31SZT6200.book 281 ページ ２０１２年１０月２５日 木曜日 午後９時９分
Sealant/Air Hose
Valve Stem
Repair Notification Label
uuIf a Tire Goes FlatuTemporarily Repairing a Flat Tire
10. Unplug the power plug from the accessory
1Injecting Sealant and Air
power socket. u Handle the compressor and the power
plug carefully. They may be hot in operation.
If the required air pressure is not reached within 10 minutes, the tire may be too severely damaged for the kit to provide the necessary seal and your vehicle will need to be towed.
11. Unscrew the sealant/air hose from the tire
valve stem. Reinstall the valve cap.
See a Honda dealer for a replacement sealant bottle and proper disposal of an empty bottle.
12. Press the pressure relief button until the
gauge returns to 0 psi (0 kPa).
13. Apply the repair notification label to the
flat surface of the wheel. u The wheel surface must be clean to
ensure the label adheres properly.
