2013 Honda Civic Hybrid Owners Manual

Download PDF Manual
1. Turn the ignition switch to ON (w. 2. Go to the Maintenance info screen. 2 Displaying the Engine Oil Life and Maintenance Items P. 255 3. Press the SOURCE button. u The oil life reset mode is displayed on the intelligent multi-information display. 4. Select YES with the (- button, then press the SOURCE button. u The displayed maintenance items disappear, and the engine oil life display returns to 100%. u Any maintenance items that are necessary for your vehicle at the next maintenance service will appear. To cancel the oil life reset mode, select No, then press the SOURCE button. 13 CIVIC HYBRID-31TR26100.book 259 ページ２０１２年１２月１８日　火曜日　午後２時５９分 Maintenance Under the Hood Maintenance Items Under the Hood Engine Oil Dipstick (Orange Loop) Engine Oil Fill Cap Washer Fluid (Blue Cap) Brake Fluid (Black Cap) Automatic Transmission (CVT) Fluid Dipstick (Yellow Loop) 12 Volt Battery Radiator Cap Engine Coolant Reservoir QRG TOC Index Home 259 13 CIVIC HYBRID-31TR26100.book 260 ページ２０１２年１２月１８日　火曜日　午後２時５９分 uuMaintenance Under the HooduOpening the Hood QRG Opening the Hood Hood Release Handle Pull 1. Park the vehicle on a level surface, and set 1Opening the Hood the parking brake. 2. Pull the hood release handle under the lower left corner of the dashboard. u The hood will pop up slightly. NOTICE Do not open the hood when the wiper arms are raised. The hood will strike the wipers, and may damage either the hood or the wipers. When closing the hood, check that the hood is securely latched. 3. Push up the hood latch lever in the center of the hood to release the lock mechanism, and open the hood. If the hood latch lever moves stiffly, or if you can open the hood without lifting the lever, the latch mechanism should be cleaned and lubricated. Do not open the hood while the Auto Idle Stop function is activated. Lever Support Rod Grip Clamp TOC Index Home 260 4. Remove the support rod from the clamp using the grip. Mount the support rod in the hood. When closing, remove the support rod, and stow it in the clamp, then gently lower the hood. Remove your hand at a height of approximately 12 inches (30 cm) and let the hood close. 13 CIVIC HYBRID-31TR26100.book 261 ページ２０１２年１２月１８日　火曜日　午後２時５９分 uuMaintenance Under the HooduRecommended Engine Oil 1Recommended Engine Oil Engine Oil Additives Your vehicle does not require oil additives. In fact, they may adversely affect the engine performance and durability. Recommended Engine Oil • Genuine Honda Motor Oil • Premium-grade 0W-20 detergent oil with an API Certification Seal on the container. Oil is a major contributor to your engine’s performance and longevity. If you drive the vehicle with insufficient or deteriorated oil, the engine may fail or be damaged. This seal indicates the oil is energy conserving and that it meets the American Petroleum Institute’s latest requirements. Use a Genuine Honda Motor Oil or another commercial engine oil of suitable viscosity for the ambient temperature as shown. Ambient Temperature ■ Synthetic oil You may also use synthetic motor oil if it is labeled with the API Certification Seal and is the specified viscosity grade. QRG TOC Index Home 261 13 CIVIC HYBRID-31TR26100.book 262 ページ２０１２年１２月１８日　火曜日　午後２時５９分 uuMaintenance Under the HooduOil Check QRG Oil Check We recommend that you check the engine oil level every time you refuel. Park the vehicle on level ground. Wait approximately three minutes after turning the engine off before you check the oil. 1Oil Check If the oil level is near or below the lower mark, slowly add oil being careful not to overfill. 1. Remove the dipstick (orange loop). 2. Wipe the dipstick with a clean cloth or paper towel. 3. Insert the dipstick back all the way into its hole. 4. Remove the dipstick again, and check the level. It should be between the upper and lower marks. Add oil if necessary. Upper Mark Lower Mark TOC Index Home 262 13 CIVIC HYBRID-31TR26100.book 263 ページ２０１２年１２月１８日　火曜日　午後２時５９分 uuMaintenance Under the HooduAdding Engine Oil Adding Engine Oil 1. Unscrew and remove the engine oil fill cap. 1Adding Engine Oil 2. Add oil slowly. 3. Reinstall the engine oil fill cap, and tighten it securely. 4. Wait for three minutes and recheck the engine oil dipstick. If any oil spills, wipe it up immediately. Spilled oil may damage the engine compartment components. NOTICE Do not fill the engine oil above the upper mark. Overfilling the engine oil can result in leaks and engine damage. Engine Oil Fill Cap QRG TOC Index Home 263 1Changing the Engine Oil and Oil Filter NOTICE You may damage the environment if you do not dispose of the oil in a suitable way. If you are changing the oil by yourself, appropriately dispose of the used oil. Put the oil in a sealed container and take it to a recycling center. Do not throw the oil away into a garbage can or onto the ground. 13 CIVIC HYBRID-31TR26100.book 264 ページ２０１２年１２月１８日　火曜日　午後２時５９分 uuMaintenance Under the HooduChanging the Engine Oil and Oil Filter QRG Changing the Engine Oil and Oil Filter You must change the engine oil and oil filter regularly in order to maintain the engine’s lubrication. The engine may be damaged if they are not changed regularly. Change the oil and filter in accordance with the maintenance message on the intelligent multi-information display. 1. Run the engine until it reaches normal operating temperature, and then turn the engine off. 2. Open the hood and remove the engine oil fill cap. 3. Remove the bolts on the undercarriage and slide the under cover backward, then remove. 4. Remove the drain bolt and washer from the bottom of the engine, and drain the oil into a suitable container. Under Cover Drain Bolt Bolt Washer TOC Index Home 264 13 CIVIC HYBRID-31TR26100.book 265 ページ２０１２年１２月１８日　火曜日　午後２時５９分 uuMaintenance Under the HooduChanging the Engine Oil and Oil Filter 5. Remove the oil filter and dispose of the 1Changing the Engine Oil and Oil Filter You will need a special wrench to replace the oil filter. You can buy this wrench from a dealer. When installing the new oil filter, follow the instructions supplied with the oil filter. Reinstall the engine oil fill cap. Start the engine. The low oil pressure indicator should go off within five seconds. If it does not, turn off the engine, and check your work. Oil Filter remaining oil. 6. Check that the filter gasket is not stuck to the engine contact surface. u If it is stuck, you must detach it. 7. Wipe away dirt and dust adhering to the contact surface of the engine block, and install a new oil filter. u Apply a light coat of new engine oil to the filter gasket. 8. Put a new washer on the drain bolt, then reinstall the drain bolt. u Tightening torque: 29 lbf∙ft (39 N∙m, 4.0 kgf∙m) 9. Pour the recommended engine oil into the engine. u Engine oil change capacity (including filter): 3.8 US qt (3.6 L) 10. Reinstall the engine oil fill cap securely and start the engine. 11. Run the engine for a few minutes, and then check that there is no leak from the drain bolt or oil filter. 12. Stop the engine, wait for three minutes, and then check the oil level on the dipstick. u If necessary, add more engine oil. QRG TOC Index Home 265 13 CIVIC HYBRID-31TR26100.book 266 ページ２０１２年１２月１８日　火曜日　午後２時５９分 uuMaintenance Under the HooduEngine Coolant QRG Engine Coolant Specified coolant: Honda Long Life Antifreeze/Coolant Type 2 1Engine Coolant NOTICE If temperatures consistently below −22°F (−30°C) are expected, the coolant mixture should be changed to a higher concentration. Consult a dealer for more information. If Honda antifreeze/coolant is not available, you may use another major brand non-silicate coolant as a temporary replacement. Check that it is a high quality coolant recommended for aluminum engines. Continued use of any non-Honda coolant can result in corrosion, causing the cooling system to malfunction or fail. Have the cooling system flushed and refilled with Honda antifreeze/coolant as soon as possible. Do not add rust inhibitors or other additives to your vehicle’s coolant system. They may not be compatible with the coolant or with the engine components. This coolant is premixed with 50% antifreeze and 50% water. Do not add any straight antifreeze or water. We recommend you check the engine coolant level every time you refuel. Check the reserve tank first. If it is completely empty, also check the coolant level in the radiator. Add the engine coolant accordingly. ■ Reserve Tank MAX Reserve Tank 1. Check the amount of coolant in the reserve tank. MIN TOC Index Home 266 2. If the coolant level is below the MIN mark, add the specified coolant until it reaches the MAX mark. 3. Inspect the cooling system for leaks. 13 CIVIC HYBRID-31TR26100.book 267 ページ２０１２年１２月１８日　火曜日　午後２時５９分 ■ Radiator Radiator Cap uuMaintenance Under the HooduEngine Coolant 1Radiator 3WARNING Removing the radiator cap while the engine is hot can cause the coolant to spray out, seriously scalding you. Always let the engine and radiator cool down before removing the radiator cap. NOTICE Pour the fluid slowly and carefully so you do not spill any. Clean up any spills immediately; they can damage components in the engine compartment. 1. Make sure the engine and radiator are cool. 2. Turn the radiator cap counterclockwise and relieve any pressure in the cooling system. Do not push the cap down when turning. 3. Push down and turn the radiator cap counterclockwise to remove it. 4. The coolant level should be up to the base of the filler neck. Add coolant if it is low. 5 . Put the radiator cap back on, and tighten it fully. 6. Pour coolant into the reserve tank until it reaches the MAX mark. Put the cap back on the reserve tank. QRG TOC Index Home 267 13 CIVIC HYBRID-31TR26100.book 268 ページ２０１２年１２月１８日　火曜日　午後２時５９分 uuMaintenance Under the HooduTransmission Fluid QRG Transmission Fluid ■ Continuously Variable Transmission (CVT) Fluid Specified fluid: Honda CVTF (continuously variable transmission fluid) Check the fluid level when the engine is at normal operating temperature. 1. Park on level ground, and start the engine. 2. Wait until the radiator fan starts and then turn off the engine. u Perform step 3 after waiting for about 60 seconds (less than 90 seconds). HOT Range Upper Mark Lower Mark 3. Remove the dipstick (yellow loop) from the transmission and wipe it with a clean cloth. 4. Insert the dipstick all the way back into the transmission securely, as shown in the image. 5. Remove the dipstick and check the fluid level. u It should be between the upper and lower marks in the HOT range. 6. If the level is below the lower mark, add fluid into the dipstick hole to bring it to the level between the upper and lower marks, and have your vehicle checked by a dealer immediately. TOC Index Home 268 1Continuously Variable Transmission (CVT) Fluid NOTICE Do not mix Honda CVTF with other transmission fluids. Using a transmission fluid other than Honda CVTF may adversely affect the operation and durability of your vehicle’s transmission, and damage the transmission. Any damage caused by using a transmission fluid that is not equivalent to Honda CVTF is not covered by Honda’s new vehicle warranty. NOTICE Pour the fluid slowly and carefully so you do not spill any. Clean up any spills immediately; they can damage components in the engine compartment. 13 CIVIC HYBRID-31TR26100.book 269 ページ２０１２年１２月１８日　火曜日　午後２時５９分 Brake Fluid Specified fluid: Honda Heavy Duty Brake Fluid DOT 3 1Brake Fluid uuMaintenance Under the HooduBrake Fluid ■ Checking the Brake Fluid MAX MIN Check the fluid level several seconds after you turn the ignition switch to ON (w. The fluid level should be between the MIN and MAX marks on the side of the reservoir. Brake Reservoir NOTICE Brake fluid marked DOT 5 is not compatible with your vehicle’s braking system and can cause extensive damage. If the specified brake fluid is not available, you should use only DOT 3 or DOT 4 fluid from a sealed container as a temporary replacement. Using any non-Honda brake fluid can cause corrosion and decrease the longevity of the system. Have the brake system flushed and refilled with Honda Heavy Duty Brake Fluid DOT 3 as soon as possible. If the brake fluid level is at or below the MIN mark, have a dealer inspect for leaks or worn brake pads as soon as possible. QRG TOC Index Home 269 13 CIVIC HYBRID-31TR26100.book 270 ページ２０１２年１２月１８日　火曜日　午後２時５９分 uuMaintenance Under the HooduRefilling Window Washer Fluid QRG Refilling Window Washer Fluid Check the amount of window washer fluid using the washer fluid level gauge on the cap. Level Gauge If the level is low, fill the washer reservoir. Canadian models If the washer fluid is low, a message appears on the intelligent multi-information display (i-MID). 1Refilling Window Washer Fluid NOTICE Do not use engine antifreeze or a vinegar/water solution in the windshield washer reservoir. Antifreeze can damage your vehicle’s paint. A vinegar/water solution can damage the windshield washer pump. Pour the washer fluid carefully. Do not overflow the reservoir. TOC Index Home 270 13 CIVIC HYBRID-31TR26100.book 271 ページ２０１２年１２月１８日　火曜日　午後２時５９分 Replacing Light Bulbs Headlight Bulbs When replacing, use the following bulbs. High beam headlight: Low beam headlight: 60 W (HB3 for halogen bulb type) 51 W (HB4 for halogen bulb type) ■ High Beam Headlight Bulb Tab Coupler 1. Push the tab to remove the coupler. 2. Rotate the old bulb to the left to remove. 3. Insert a new bulb into the headlight assembly and turn it to the right. 4. Insert the coupler into the connector of the bulb. Continued 1Headlight Bulbs NOTICE Halogen bulbs get very hot when lit. Oil, perspiration, or a scratch on the glass can cause the bulb to overheat and shatter. The headlight aim is set by the factory, and does not need to be adjusted. However, if you regularly carry heavy items in the trunk, have the aiming readjusted at a dealer or by a qualified technician. When replacing a halogen bulb, handle it by its base, and protect the glass from contact with your skin or hard objects. If you touch the glass, clean it with denatured alcohol and a clean cloth. The exterior lights’ inside lenses (headlights, brake lights, etc.) may fog temporarily after a car wash or while driving in the rain. This does not impact the exterior light function. However, if you see a large amount of water or ice accumulated inside the lenses, have your vehicle inspected by a dealer. QRG TOC Index Home 271 13 CIVIC HYBRID-31TR26100.book 272 ページ２０１２年１２月１８日　火曜日　午後２時５９分 uuReplacing Light BulbsuDaytime Running Light Bulbs QRG ■ Low Beam Headlights Clip Passenger’s side 1. Remove the holding clip using a flat-tip screwdriver, then remove the upper part of the windshield washer reservoir. 1Low Beam Headlights Insert a flat-tip screwdriver, lift and remove the central pin to remove the clip. Central pin Driver’s and passenger’s side 2. Push the tab to remove the coupler. 3. Rotate the old bulb to the left to remove. 4. Insert a new bulb into the headlight assembly and turn it to the right. 5. Insert the coupler into the connector of Insert the clip with the central pin raised, and push until it is flat. Push until the pin is flat. Coupler the bulb. Daytime Running Light Bulbs Daytime running light bulbs are LED type. Have an authorized Honda dealer inspect and replace the light assembly. TOC Index Home 272 13 CIVIC HYBRID-31TR26100.book 273 ページ２０１２年１２月１８日　火曜日　午後２時５９分 uuReplacing Light BulbsuFront Turn Signal/Parking/Side Marker Light Bulbs Front Turn Signal/Parking/Side Marker Light Bulbs When replacing, use the following bulbs. Front Turn Signal/Parking/Side Marker Light: 28/8 W Inner Fender 1. Turn the steering wheel all the way to the opposite side from the light being replaced. Passenger side: Turn the steering wheel to the left. Driver side: Turn the steering wheel to the right. 2. Remove the holding clips, and pull the inner fender back. 1Front Turn Signal/Parking/Side Marker Light Bulbs When removing the clip, insert a flat-tip screwdriver, then lift and remove the clip. QRG Clip Socket 3. Turn the socket to the left and remove it, then remove the old bulb. Insert the clip with the pin raised, and push until it is flat. 4. Insert a new bulb. Push until the pin is flat Clip Bulb Side Turn Signal/Emergency Indicator Light Bulbs Door mirrors have the side turn lights. Have an authorized Honda dealer inspect and replace the light assembly. TOC Index Home 273 13 CIVIC HYBRID-31TR26100.book 274 ページ２０１２年１２月１８日　火曜日　午後２時５９分 uuReplacing Light BulbsuRear Turn Signal Light Bulbs QRG Rear Turn Signal Light Bulbs When replacing, use the following bulbs. Rear Turn Signal Light: 21 W (Amber) Lining 1. Remove the holding clips using a flat-tip screwdriver, then pull the lining back. 1Rear Turn Signal Light Bulbs When removing the clip, insert a flat-tip screwdriver, then lift and remove the clip. Clip Clip 2. Turn the socket to the left and remove it. Remove the old bulb. 3. Insert a new bulb. Insert the clip with the pin raised, and push until it is flat. Push until the pin is flat Bulb Socket Brake/Taillight and Rear Side Maker Bulbs Brake/rear taillight and rear side marker bulbs are LED type. Have an authorized Honda dealer inspect and replace the light assembly. TOC Index Home 274 13 CIVIC HYBRID-31TR26100.book 275 ページ２０１２年１２月１８日　火曜日　午後２時５９分 uuReplacing Light BulbsuBack-Up Light Bulbs Back-Up Light Bulbs When replacing, use the following bulbs. Back-Up Light: 16 W Lining Fastener Clip Bulb 1. Remove the screw from the center of the fastener using a Phillips-head screwdriver. 2. Remove the holding clips using a flat-tip screwdriver, then pull the lining back. 2 Rear Turn Signal Light Bulbs P. 274 3. Turn the socket to the left and remove it. 4. Remove the old bulb and insert a new bulb. Socket Taillight Bulbs Taillight bulbs in the trunk lid are LED type. Have an authorized Honda dealer inspect and replace the light assembly. QRG TOC Index Home 275 13 CIVIC HYBRID-31TR26100.book 276 ページ２０１２年１２月１８日　火曜日　午後２時５９分 uuReplacing Light BulbsuRear License Plate Light Bulbs QRG Rear License Plate Light Bulbs When replacing, use the following bulbs. Rear License Plate Light: 5 W Lining Fastener Clip Bulb 1. Remove the screw from the center of the fastener using a Phillips-head screwdriver. 2. Remove the holding clips using a flat-tip screwdriver, then pull the lining back. 2 Rear Turn Signal Light Bulbs P. 274 3. Remove the license plate light assembly by squeezing the tabs on both sides of the socket. 4. Remove the old bulb and insert a new bulb. Socket High-Mount Brake Light Bulbs High-mount brake light bulbs are LED type. Have an authorized Honda dealer inspect and replace the light assembly. TOC Index Home 276 13 CIVIC HYBRID-31TR26100.book 277 ページ２０１２年１２月１８日　火曜日　午後２時５９分 Checking and Maintaining Wiper Blades Checking Wiper Blades If the wiper blade rubber has deteriorated, it will leave streaks and the metal wiper arm may scratch the window glass. Changing the Wiper Blade Rubber 1. Lift the driver side wiper arm first, then the passenger side. 1Changing the Wiper Blade Rubber NOTICE Avoid dropping the wiper arm; it may damage the windshield. Lock Tab 2. Place a cloth on the edge of the lock tab. Push the lock tab up with a flat-tip screw driver. 3. Slide the blade from the wiper arm. Continued QRG TOC Index Home 277 13 CIVIC HYBRID-31TR26100.book 278 ページ２０１２年１２月１８日　火曜日　午後２時５９分 uuChecking and Maintaining Wiper BladesuChanging the Wiper Blade Rubber 4. Slide the wiper blade out from its holder by pulling the tabbed end out. Blade Top Retainer Blade Indent Tab 5. Remove the retainers from the rubber blade that has been removed, and mount to a new rubber blade. u Correctly align the rubber protrusion and the retainer grooves. 6. Slide the new wiper blade onto the holder from the bottom end. u The tab on the holder should fit in the indent of the wiper blade. 7. Slide the wiper blade onto the wiper arm, then push down the lock tab. 8. Lower the passenger side wiper arm first, then the driver side. QRG TOC Index Home 278 13 CIVIC HYBRID-31TR26100.book 279 ページ２０１２年１２月１８日　火曜日　午後２時５９分 Checking and Maintaining Tires Checking Tires To safely operate your vehicle, your tires must be of the proper type and size, in good condition with adequate tread, and properly inflated. ■ Inflation guidelines Properly inflated tires provide the best combination of handling, tread life, and comfort. Refer to the driver’s doorjamb label or specification’s page for the specified pressure. Underinflated tires wear unevenly, adversely affect handling and fuel economy, and are more likely to fail from overheating. Overinflated tires make your vehicle ride harshly, are more prone to road hazards, and wear unevenly. Every day before you drive, look at each of the tires. If one looks lower than the others, check the pressure with a tire gauge. At least once a month or before long trips, use a gauge to measure the pressure in all tires, including the spare. Even tires in good condition can lose 1 to 2 psi (10 to 20 kPa, 0.1 to 0.2 kgf/cm2) per month. ■ Inspection guidelines Every time you check inflation, also examine the tires and valve stems. Look for: • Bumps or bulges on the side or in the tread. Replace the tire if you find any cuts, splits, or cracks in the side of the tire. Replace it if you see fabric or cord. • Remove any foreign objects and inspect for air leaks. • Uneven tread wear. Have a dealer check the wheel alignment. • Excessive tread wear. 2 Wear Indicators P. 284 • Cracks or other damage around valve stem. 1Checking Tires 3WARNING Using tires that are excessively worn or improperly inflated can cause a crash in which you can be seriously hurt or killed. Follow all instructions in this owner’s manual regarding tire inflation and maintenance. Measure the air pressure when tires are cold. This means the vehicle has been parked for at least three hours, or driven less than 1 mile (1.6 km). If necessary, add or release air until the specified pressure is reached. If checked when hot, tire pressure can be as much as 4–6 psi (30–40 kPa, 0.3–0.4 kgf/cm2) higher than if checked when cold. Have a dealer check the tires if you feel a consistent vibration while driving. New tires and any that have been removed and reinstalled should be properly balanced. QRG TOC Index Home 279 13 CIVIC HYBRID-31TR26100.book 280 ページ２０１２年１２月１８日　火曜日　午後２時５９分 uuChecking and Maintaining TiresuTire and Loading Information Label QRG Tire and Loading Information Label The label attached to the driver’s doorjamb provides necessary tire and loading information. Label Example 1Tire and Loading Information Label The tire and loading information label attached to the driver’s doorjamb contains: a The number of people your vehicle can carry. b The total weight your vehicle can carry. Do not c The original tire sizes for front, rear, and spare. d The proper cold tire pressure for front, rear, and exceed this weight. spare. Tire Labeling Example Tire Size Tire Identification Number (TIN) Maximum Tire Load Maximum Tire Pressure Tire Size The tires that came on your vehicle have a number of markings. Those you should be aware of are described below. 1Tire Size Following is an example of tire size with an explanation of what each component means. P195/65 R15 89S P: 195: Tire width in millimeters. 65: Aspect ratio (the tire’s section height as a Vehicle type (P indicates passenger vehicle). ■ Tire Size Whenever tires are replaced, they should be replaced with tires of the same size. S: percentage of its width). Tire construction code (R indicates radial). R: 15: Rim diameter in inches. 89: Load index (a numerical code associated with the maximum load the tire can carry). Speed symbol (an alphabetical code indicating the maximum speed rating). TOC Index Home 280 13 CIVIC HYBRID-31TR26100.book 281 ページ２０１２年１２月１８日　火曜日　午後２時５９分 ■ Tire Identification Number (TIN) The tire identification number (TIN) is a group of numbers and letters that look like the example in the side column. TIN is located on the sidewall of the tire. ■ Glossary of Tire Terminology Cold Tire Pressure – The tire air pressure when the vehicle has been parked for at least three hours or driven less than 1 mile (1.6 km). Load Rating – Means the maximum load that a tire is rated to carry for a given inflation pressure. Maximum Inflation Pressure – The maximum tire air pressure that the tire can hold. Maximum Load Rating – Means the load rating for a tire at the maximum permissible inflation pressure for that tire. Recommended Inflation Pressure – The cold tire inflation pressure recommended by the manufacturer. Treadwear Indicators (TWI) – Means the projections within the principal grooves designed to give a visual indication of the degrees of wear of the tread. uuChecking and Maintaining TiresuTire Labeling 1Tire Identification Number (TIN) DOT B97R FW6X 2209 DOT: This indicates that the tire meets all requirements of the U.S. Department of Transportation. B97R: Manufacturer’s identification mark. FW6X: Tire type code. 22 09: Date of manufacture. Year Week QRG TOC Index Home 281 13 CIVIC HYBRID-31TR26100.book 282 ページ２０１２年１２月１８日　火曜日　午後２時５９分 uuChecking and Maintaining TiresuDOT Tire Quality Grading (U.S. Vehicles) DOT Tire Quality Grading (U.S. Vehicles) The tires on your vehicle meet all U.S. Federal Safety Requirements. All tires are also to Department of these gradings. Transportation (DOT) standards. The following explains graded for treadwear, traction, and temperature performance according ■ Uniform Tire Quality Grading Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width. ■ Treadwear The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wear one and one-half (1 1/2) times as well on the government course as a tire graded 100. The relative performance of tires depends upon the actual conditions of their use, however, and may depart significantly from the norm due to variations in driving habits, service practices and differences in road characteristics and climate. 1Uniform Tire Quality Grading For example: Treadwear 200 Traction AA Temperature A All passenger car tires must conform to Federal Safety Requirements in addition to these grades. QRG TOC Index Home 282 13 CIVIC HYBRID-31TR26100.book 283 ページ２０１２年１２月１８日　火曜日　午後２時５９分 uuChecking and Maintaining TiresuDOT Tire Quality Grading (U.S. Vehicles) ■ Traction The traction grades, from highest to lowest, are AA, A, B, and C. Those grades represent the tire’s ability to stop on wet pavement as measured under controlled conditions on specified government test surfaces of asphalt and concrete A tire marked C may have poor traction performance. ■ Temperature The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure. The grade C corresponds to a level of performance which all passenger car tires must meet under the Federal Motor Vehicle Safety Standard No. 109. Grades B and A represent higher levels of performance on the laboratory test wheel than the minimum required by law. 1Traction Warning: The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristics. 1Temperature Warning: The temperature grade for this tire is established for a tire that is properly inflated and not overloaded. Excessive speed, underinflation, or excessive loading, either separately or in combination, can cause heat buildup and possible tire failure. QRG TOC Index Home 283 13 CIVIC HYBRID-31TR26100.book 284 ページ２０１２年１２月１８日　火曜日　午後２時５９分 uuChecking and Maintaining TiresuWear Indicators QRG Wear Indicators Example of a Wear Indicator mark The groove where the wear indicator is located is 1/16 inch (1.6 mm) shallower than elsewhere on the tire. If the tread has worn so that the indicator is exposed, replace the tire. Worn out tires have poor traction on wet roads. Tire Service Life The life of your tires is dependent on many factors, including driving habits, road conditions, vehicle loading, inflation pressure, maintenance history, speed, and environmental conditions (even when the tires are not in use). In addition to regular inspections and inflation pressure maintenance, it is recommended that you have annual inspections performed once the tires reach five years old. All tires, including the spare, should be removed from service after 10 years from the date of manufacture, regardless of their condition or state of wear. TOC Index Home 284 13 CIVIC HYBRID-31TR26100.book 285 ページ２０１２年１２月１８日　火曜日　午後２時５９分 uuChecking and Maintaining TiresuTire and Wheel Replacement Tire and Wheel Replacement Replace your tires with radials of the same size, load range, speed rating, and maximum cold tire pressure rating (as shown on the tire’s sidewall). Using tires of a different size or construction can cause the ABS and vehicle stability assist (VSA®) system to work incorrectly. It is best to replace all four tires at the same time. If that isn’t possible, replace the front or rear tires in pairs. Make sure that the wheel’s specifications match those of the original wheels. U.S. models only If you replace a wheel, only use TPMS specified wheels approved for your vehicle. 1Tire and Wheel Replacement 3WARNING Installing improper tires on your vehicle can affect handling and stability. This can cause a crash in which you can be seriously hurt or killed. Always use the size and type of tires recommended in this owner’s manual. QRG TOC Index Home 285 13 CIVIC HYBRID-31TR26100.book 286 ページ２０１２年１２月１８日　火曜日　午後２時５９分 uuChecking and Maintaining TiresuTire Rotation QRG Tire Rotation Rotating tires according to the maintenance messages on the intelligent multi- information display helps to distribute wear more evenly and increase tire life. ■ Tires without rotation marks Rotate the tires as shown here. Front ■ Tires with rotation marks Rotate the tires as shown here. 1Tire Rotation Tires with directional tread patterns should only be rotated front to back (not from one side to the other). Directional tires should be mounted with the rotation indication mark facing forward, as shown below. Front Direction Mark Front TOC Index Home 286 13 CIVIC HYBRID-31TR26100.book 287 ページ２０１２年１２月１８日　火曜日　午後２時５９分 Winter Tires If driving on snowy or frozen roads, mount all season marked M+S tires, snow tires, or tire chains; reduce speed; and maintain sufficient distance between vehicles when driving. Be particularly careful when operating the steering wheel or brakes to prevent skidding. Use tire chains, snow tires, or all season tires when necessary or according to the law. When mounting, refer to the following points. For winter tires: • Select the size and load ranges that are the same as the original tires. • Mount the tires to all four wheels. For tire chains: • Install them on the front tires only. • Because your vehicle has limited tire clearance, we strongly recommend using the chains listed below: Cable-type: SCC Radial Chain SC1030 • Follow the chain manufacturer’s instruction when installing. Mount them as tightly as you can. • Check that the chains do not touch the brake lines or suspension. • Drive slowly. uuChecking and Maintaining Tires uWinter Tires 1Winter Tires 3WARNING Using the wrong chains, or not properly installing chains, can damage the brake lines and cause a crash in which you can be seriously injured or killed. Follow all instructions in this owner’s manual regarding the selection and use of tire chains. NOTICE Traction devices that are the wrong size or improperly installed can damage your vehicle’s brake lines, suspension, body, and wheels. Stop driving if they are hitting any part of the vehicle. When tire chains are mounted, follow the chain manufacturer’s instructions regarding vehicle operational limits. QRG TOC Index Home 287 13 CIVIC HYBRID-31TR26100.book 288 ページ２０１２年１２月１８日　火曜日　午後２時５９分 12 Volt Battery QRG Checking the 12 Volt Battery Check the battery condition monthly and check the terminals for corrosion. 112 Volt Battery If your vehicle’s battery is disconnected or goes dead: • The audio system is disabled. 2 Reactivating the audio system P. 146 • The clock resets. 2 Setting the Clock P. 104 • The navigation system * is disabled. 2 Refer to the navigation system manual Charging the Battery Disconnect both battery cables to prevent damaging your vehicle’s electrical system. Always disconnect the negative (-) cable first, and reconnect it last. TOC Index Home 288 * Not available on all models 3WARNING The battery gives off explosive hydrogen gas during normal operation. A spark or flame can cause the battery to explode with enough force to kill or seriously hurt you. When conducting any battery maintenance, wear protective clothing and a face shield, or have a skilled technician do it. WARNING: Battery post, terminals, and related accessories contain lead and lead compounds. Wash your hands after handling. When you find corrosion, clean the battery terminals by applying a baking powder and water solution. Clean the terminals with a damp towel. Cloth/towel dry the battery. Coat the terminals with grease to help prevent future corrosion. 13 CIVIC HYBRID-31TR26100.book 289 ページ２０１２年１２月１８日　火曜日　午後２時５９分 Remote Transmitter Care Replacing the Button Battery If the indicator does not come on when the button is pressed, replace the battery. 1Replacing the Button Battery QRG Keypad Battery Battery type: CR1616 1. Unscrew the cover with a small Phillips- head screwdriver. Press a button to pry open the transmitter. NOTICE An improperly disposed of battery can damage the environment. Always confirm local regulations for battery disposal. Replacement batteries are commercially available or at a dealer. Screw Tab 2. Open the keypad. u Separate the inner cover from the keypad by releasing the two tabs on the cover. 3. Make sure to replace the battery with the correct polarity. TOC Index Home 289 13 CIVIC HYBRID-31TR26100.book 290 ページ２０１２年１２月１８日　火曜日　午後２時５９分 Climate Control System Maintenance QRG Dust and Pollen Filter The Climate Control system is equipped with a dust and pollen filter that collects pollen, dust, and other debris in the air. The Maintenance MinderTM messages will let you know when to replace the filter. We recommend that you replace the dust and pollen filter sooner when using your vehicle in areas with high concentrations of dust. 1Dust and Pollen Filter If the airflow from the climate control system deteriorates noticeably, and the windows fog up easily, the filter may need to be replaced. Please contact a dealer for replacement. TOC Index Home 290 13 CIVIC HYBRID-31TR26100.book 291 ページ２０１２年１２月１８日　火曜日　午後２時５９分 Cleaning Interior Care Use a damp cloth with a mixture of mild detergent and warm water to remove dirt. Use a clean cloth to remove detergent residue. 1Interior Care Do not spill liquids inside the vehicle. QRG ■ Cleaning Seat Belts Use a soft brush with a mixture of mild soap and warm water to clean the seat belts. Let the belts air dry. Wipe the openings of the seat belt anchors using a clean cloth. Opening Continued Electrical devices and systems may malfunction if liquids are splashed on them. Do not use silicone based sprays on electrical devices such as audio devices and switches. Doing so may cause the items to malfunction or a fire inside the vehicle. If a silicone based spray is inadvertently used on electrical devices, consult a dealer. Depending on their composition, chemicals and liquid aromatics may cause discoloration, wrinkles, and cracking to resin-based parts and textiles. Do not use alkali solvents or organic solvents such as benzene or gasoline. After using chemicals, make sure to gently wipe them off using a dry cloth. Do not place used cloths on top of resin based parts or textiles for long periods of time without washing. TOC Index Home 291 1Floor Mats If you use any floor mats that were not originally provided with your vehicle, make sure they are designed for your specific vehicle, fit correctly, and are securely anchored by the floor anchors. Position the rear seat floor mats properly. If they are not properly positioned, the floor mats can interfere with the front seat functions. 13 CIVIC HYBRID-31TR26100.book 292 ページ２０１２年１２月１８日　火曜日　午後２時５９分 uuCleaninguInterior Care QRG ■ Floor Mats Unlock Lock The driver’s floor mat hooks over the floor anchors, which keep the mat from sliding forward. To remove a mat for cleaning, turn the anchor knobs to the unlock position. When reinstalling the mat after cleaning, turn the knobs to the lock position. Do not put additional floor mats on top of the anchored mat. ■ Maintaining Genuine Leather* Vacuum dirt and dust from the leather frequently. Pay close attention to the pleats and seams. Clean the leather with a soft cloth dampened with a 90% water and 10% neutral soap solution. Then buff it with a clean, dry cloth. Remove any dust or dirt on leather surfaces immediately. * Not available on all models TOC Index Home 292 13 CIVIC HYBRID-31TR26100.book 293 ページ２０１２年１２月１８日　火曜日　午後２時５９分 Exterior Care Dust off the vehicle body after you drive. Regularly inspect your vehicle for scratches on painted surfaces. A scratch on a painted surface can result in body rust. If you find a scratch, promptly repair it. ■ Washing the Vehicle Wash the vehicle regularly. Wash more frequently when driving in the following conditions: • If driving on roads with road salt. • If driving in coastal areas. • If tar, soot, bird droppings, insects, or tree sap are stuck to painted surfaces. uuCleaninguExterior Care QRG 1Washing the Vehicle Do not spray water into the air intake vents or engine compartment. It can cause a malfunction. ■ Using an Automated Car Wash Make sure to follow the instructions indicated on the automated car wash: Air Intake Vents • Remove the audio antenna. • Fold in the door mirrors. ■ Using High Pressure Cleaners • Keep sufficient distance between the cleaning nozzle and the vehicle body. • Take particular care around the windows. Standing too close may cause water to enter the vehicle interior. Do not spray water into the engine compartment. Continued TOC Index Home 293 13 CIVIC HYBRID-31TR26100.book 294 ページ２０１２年１２月１８日　火曜日　午後２時５９分 uuCleaninguExterior Care QRG ■ Applying Wax A good coat of automotive body wax helps protect your vehicle’s paint from the elements. Wax will wear off over time and expose your vehicle’s paint to the elements, so reapply as necessary. 1Applying Wax NOTICE Chemical solvents and strong cleaners can damage the paint, metal, and plastic on your vehicle. Wipe up spills immediately. ■ Maintaining the Bumpers and Other Resin Coated Parts If you get gasoline, oil, engine coolant, or battery fluid on resin coated parts, they may be stained or the coating may peel. Promptly wipe it away using a soft cloth and clean water. 1Maintaining the Bumpers and Other Resin Coated Parts Ask a dealer about the correct coating material when you want to repair the painted surface of the parts made of resin. ■ Cleaning the Window Wipe using a glass cleaner. TOC ■ Maintaining Aluminum Wheels Aluminum is susceptible to deterioration caused by salt and other road contaminants. Use a sponge and mild detergent to wipe away promptly. Be careful not to use harsh chemicals (including some commercial wheel cleaners) or a stiff brush. They can damage the clear coat of the aluminum alloy wheels that helps keep the aluminum from corroding and tarnishing. 1Cleaning the Window Wires are mounted to the inside of the rear window. Wipe along the same direction as the wires with a soft cloth so as not to damage them. Index Home 294 13 CIVIC HYBRID-31TR26100.book 295 ページ２０１２年１２月１８日　火曜日　午後２時５９分 Handling the Unexpected QRG This chapter explains how to handle unexpected troubles. Tools Types of Tools.................................. 296 If a Tire Goes Flat Temporarily Repairing a Flat Tire....... 297 Changing a Flat Tire......................... 305 Engine Does Not Start Checking the Engine........................ 311 Jump Starting.................................... 312 Shift Lever Does Not Move.............. 314 Overheating How to Handle Overheating............. 315 Indicator, Coming On/Blinking 317 If the Low Oil Pressure Indicator Comes On.................................... If the 12 Volt Battery Charging System Indicator Comes On ........... If the Malfunction Indicator Lamp Comes On or Blinks......................... If the Brake System Indicator (Red) Comes On.......................................... 319 If the EPS System Indicator Comes On.. 319 If the IMA Indicator Comes On......... 320 317 318 If the Low Tire Pressure/TPMS Indicator Comes On or Blinks ....................... 320 Fuses Fuse Locations ................................. 321 Inspecting and Changing Fuses........ 323 Emergency Towing........................... 324 Index Home 295 13 CIVIC HYBRID-31TR26100.book 296 ページ２０１２年１２月１８日　火曜日　午後２時５９分 Tools QRG Types of Tools Models with optional compact spare Wheel Nut Wrench/ Jack Handle Jack

Boost Classifieds - Car Advice, Reviews, Events & Classifieds

2013 Honda Civic Hybrid Owners Manual