Download PDF Manual


To return the screen to the upright position, press the CLOSE button.


You cannot close the screen if a disc is partially inserted into its slot.


You can also eject the disc when the ignition switch is off.


167


10/06/24 19:54:02 31SNC650_173


Playing a Disc (Models with navigation system)


Protecting Discs For information on how to handle and protect discs, see page


206


Operating the Optional Disc Changer An optional six or eight disc changer is available for your vehicle. This disc changer uses the same controls used for the in-dash disc player or the radio.


Load the desired discs in the magazine, and load the magazine in the changer according to the instructions that came with the unit.


To select the disc changer, press the CD/XM button. The disc and track numbers will be displayed. To select a different disc, use either side of the TUNE bar. To select the previous disc, press the next disc, press the


side. To select the


side.




If you select an empty slot in the magazine, the changer will search for the next available disc to load and play.


168


10/06/24 19:54:12 31SNC650_174


Disc Player Error Messages (Models with navigation system)


The chart on the right explains the error messages you may see in the display while playing a disc.


If you see an error message in the display while playing a disc, press the eject button. After ejecting the disc, check it for damage or deformation. If there is no damage, insert the disc again.


If there is still a problem, the error message will appear again. Press the eject button, and pull out the disc.


Insert a different disc. If the new disc plays, there is a problem with the first disc. If the error message cycle repeats and you cannot clear it, take your vehicle to a dealer.


Error


Message


Cause


Solution


FOCUS Error


Mechanical Error


TOC Error


High Temperature


Press the eject button, and pull out the disc. Make sure it is inserted correctly in the disc player. Make sure the disc is not scratched or damaged. For more information, see page 207. Press the eject button, and pull out the disc. Check the disc for damage or deformation. For more information, see page 207. If the disc cannot be pulled out, or the error message does not disappear after the disc is ejected, see your dealer. Press the eject button, and pull out the disc. Check the disc for damage or deformation. Will disappear when the temperature returns to normal.


169


10/06/24 19:54:18 31SNC650_175


Playing a PC Card (Models with navigation system)


TRACK LIST ICON


PC CARD ICON


JOYSTICK


PLAY MODE ICON


RANDOM BUTTON


FAST FORWARD BUTTON


SKIP



BUTTON


REPEAT BUTTON


REWIND BUTTON


SKIP



BUTTON


POWER/VOLUME KNOB


OPEN BUTTON


CD/XM BUTTON


AUDIO BUTTON


SCAN BUTTON


TUNE BAR


170


10/06/24 19:54:30 31SNC650_176


Playing a PC Card (Models with navigation system)


To Play a PC Card You operate the PC card player with the same controls used for the radio and the disc player. To load or play a card, the ignition switch must be in the ACCESSORY (I) or ON (II) position.


The PC card player reads and plays cards in MP3 or WMA formats. Depending on the format, the screen will indicate ‘‘MP3’’ or ‘‘WMA’’ when a card is playing. The card limit of the player is 99 folders and 999
tracks. If the card has a complex structure, it takes some time for the system to begin playing it.


Based on PCMCIA 2.1/JEIDA 4.2, the recommended PC cards for the PC card reader are:


CompactFlash Flash ATA SD memory card


Always use the recommended memory card with the appropriate adapter (if an adapter is needed). Some memory cards will not work in this unit.


NOTE:


When you insert a PC card into the slot, make sure you put it in straight. If you cannot insert it, remove it, and insert again.


Do not keep PC cards in the vehicle. Direct sunlight and high heat will damage them.


To avoid damaging the card reader, do not insert hard disc drive cards into the PC card slot.


You cannot close the screen (move it to the upright position) until the PC card is inserted all the way into its slot or removed.


Never insert foreign objects into the PC card slot.


Depending on the type of encoding and writing software used, there may be cases where character information does not display properly.


CONTINUED


171


10/06/24 19:54:38 31SNC650_177


Playing a PC Card (Models with navigation system)


In WMA format, DRM (digital rights management) files cannot be played. If the system finds a DRM file, it skips that file and plays the next available folder or file.


LoadingaPCCard


PC CARD SLOT


The PC card slot is behind the navigation screen. To use the PC card player, press the OPEN button beside the screen. The screen folds back, and the PC card slot appears.


172


Insert a PC card straight into the slot. The drive will read the PC card and begin to play it.


Return the screen to the upright position by pressing the CLOSE button on the edge of the screen panel.


Push the AUDIO button beside the screen to show the audio display and operate the PC card player.


You can also operate the audio system without using the control icons on the audio screen. Press any of the appropriate control buttons. The status bar appears on the bottom of the screen. On the navigation screen, you can see the audio information whenever you touch the AUDIO INFO icon on the screen.


10/06/24 19:54:51 31SNC650_178


ToSelectaPlayMode There are three play modes: Folder, Artist, and Album. Touch the PLAY MODE icon, then choose one of the modes by touching its icon. When a mode is selected, it is highlighted in blue.


Folder mode plays tracks in the order they were added to the card. Artist mode plays tracks in alphabetical order, by artist and song title. Album mode plays albums (folders) in alphabetical order.


If play mode information was not included in the tracks when they were added to the card, it will not be displayed on the screen.


To select a play mode, push the AUDIO button to show the audio display, then touch the PLAY MODE icon on the display.


Playing a PC Card (Models with navigation system)


FOLDER MODE


PLAY MODE ICON


MODE INDICATOR


ARTIST MODE


PLAY MODE ICON


ALBUM MODE


PLAY MODE ICON


MODE INDICATOR


MODE INDICATOR


CONTINUED


173


10/06/24 19:54:57 31SNC650_179


Playing a PC Card (Models with navigation system)


Select the desired mode by touching the appropriate icon, or move the joystick, then press ENT.


After you select the play mode, the display changes to the selectable playing menu. If you select ‘‘Continue playing the current song,’’ the system goes into the selected play mode after playing the current file.


174


If you select ‘‘Play a New Track List,’’ the system goes into the selected play mode immediately and begins to play the files in order to the new list.


To go back to the previous screen, press the CANCEL button on the right side of the screen. To exit the play mode screens, press the AUDIO button.


10/06/25 14:55:45 31SNC650_180


ToChangeorSelectTracks/Files


PRESET BUTTON’S FUNCTION


PRESET BUTTONS


U.S. model is shown.


You can use the preset buttons while a card is playing to select or change files. Each preset button’s function is shown on the bottom of the screen.


Icons on the screen can also be selected with the joystick. Move the joystick left or right and up or down until the icon is highlighted, then press ENT on the top of the joystick to select the icon.


Playing a PC Card (Models with navigation system)



Each time you press and (preset 6 button), the


SKIP release player skips forward to the beginning of the next file. Press and release (preset 5 button), to skip backward to the beginning of the current file. Press it again to skip to the beginning of the previous file.



FF/REW a file, press and hold button) or


To move rapidly within (preset 4


(preset 3 button).




To


FOLDER SELECTION select a different folder, press either side of the TUNE bar to move to the beginning of the next folder. Press the side of the TUNE bar to skip the next folder, and press the side ▼ to move to the beginning of the current folder. Press it again to skip to the beginning of the previous folder.



To continuously replay


TRACK REPEAT (FILE REPEAT) a file, press and release the RPT button (preset 1). You will see TRACK REPEAT in the display. Press the RPT button again to turn it off.



This feature, when


FOLDER/ARTIST/ALBUM REPEAT activated, replays all the files in the selected folder/artist/album in the order they are recorded or listed. To activate each repeat mode, press and hold the RPT button (preset 1) for 2
seconds. You will see FOLDER REPEAT, ARTIST REPEAT or ALBUM REPEAT in the display. The system continuously replays the current folder/artist/album. Press and hold the RPT button for 2
seconds again to turn it off. Pressing the RDM button, or selecting a different folder/artist/album with the TUNE bar also turns off the repeat feature.


CONTINUED


175


10/06/24 19:55:16 31SNC650_181


Playing a PC Card (Models with navigation system)



TRACK RANDOM (Random This feature within a folder) plays the files within a folder in random order. To activate track random, press and release the RDM button (preset 2). You will see TRACK RANDOM in the display. Press and hold the RDM button for 2
seconds to return to normal play.



This feature, when


FOLDER/ARTIST/ALBUM RANDOM activated, plays all files in each folder/artist/album in random order, rather than in the order they are recorded or listed. To activate each random play, press the RDM button (preset 2) 2 times. You will see FOLDER RANDOM, ARTIST RANDOM or ALBUM RANDOM in the display.


The system then selects and plays files randomly. This continues until you deactivate each random play by pressing the RDM button again, or you select a different folder/artist/ album with the TUNE bar.



The scan function samples


SCAN all files on the PC card in the order they are recorded. To activate scan, press and release the SCAN button. You will see TRACK SCAN in the display. You will get a 10 second sampling of each file on the PC card. Press and hold the SCAN button for 2 seconds to get out of scan mode and play the last file sampled.


Pressing either of the SKIP buttons (preset 5 button or 6 button) also turns off the scan feature.



This feature, when


FOLDER/ARTIST/ALBUM SCAN activated, samples the first file in each folder/artist/album on the PC card in order. To activate each scan feature, press and hold the SCAN button until you hear a beep. You will see FOLDER SCAN, ARTIST SCAN or ALBUM SCAN in the display.


The system plays the first file in the folder for about 10 seconds. If you do nothing, the system plays the first file in each folder, in order, for 10
seconds each. After playing the first file of the last folder/artist/album, the system returns to normal play.


Pressing either of the SKIP buttons (preset 5 button or 6 button), selecting a different folder/artist/ album with the TUNE bar, or pressing the SCAN button, also turns off the scan feature.


176


10/06/24 19:55:26 31SNC650_182


Playing a PC Card (Models with navigation system)


UsingaTrackList


FOLDER ICON


TRACK LIST ICON


RETURN ICON


You can also select a file directly from the folder and track lists on the audio display. Press the AUDIO button to show the audio display, then touch the Track List icon. The folder list menu appears on the display.


or


▲ ▼


To scroll through the display, touch the icon on the side of the screen. To go back to the previous display, touch the Return icon.


To select a folder, touch its icon on the screen. The display changes to the file list. Then, select and touch a desired file. In folder mode, touch the folder icon on the upper left of the screen to move to the parent folder. The current folder is highlighted in blue.


CONTINUED


177


10/06/24 19:55:34 31SNC650_183


Playing a PC Card (Models with navigation system)


ARTIST NAME


ALBUM NAME


To select a desired icon with the joystick, move it in the appropriate direction, then press ENT.


Press the AUDIO button to go back to the normal audio playing display. Pressing the CANCEL button goes back to the previous screen, and pressing the MAP button cancels the audio control display on the screen.


In artist mode, the artist name is also displayed on the right side of each selectable icon. Select the desired file.


In album mode, the album name is also displayed on the right side of each selectable icon. Select the desired file.


178


10/06/24 19:55:45 31SNC650_184


Playing a PC Card (Models with navigation system)


SongSearchFunction


SearchingforaSongTitlebyKeyword


SONG SEARCH ICON


TITLE BY KEYWORD ICON


MORE ICON


Folder mode is shown.


RETURN ICON


ARTIST ICON


ALBUM ICON


DELETE ICON


LIST ICON


When you select ‘‘Song Search’’ from the track list display, the song search menu appears.


You can then select any of three modes to search a file: Title by Keyword, Artist, and Album.


In Title by Keyword mode, enter the title name, or any keyword, by touching the letter icons on the screen. Touch the List icon to begin the song search. If you press the CANCEL button on the screen, the display returns to the mode menu without doing a search.


CONTINUED


179


10/06/24 19:55:54 31SNC650_185


Playing a PC Card (Models with navigation system)


To cancel the selected letter, select the letter and touch the Delete icon. To select more characters, touch the More icon. The other character list will be shown.


FILE LIST


SearchingforaSongbyArtistName


SearchingforaSongbyAlbumName


ARTIST LIST


ALBUM LIST


Select the Artist icon, and the artist list appears. Select the desired artist, and the artist’s file list is displayed.


Select the Album icon, and the album list appears. Select the desired album, and its song list is displayed. You can then select the desired song from the list.


After the system searches for a song, a file list is displayed. To scroll through the list, touch the or icon on the side of the screen. Select the desired file by touching the appropriate icon, or moving the joystick and pressing ENT.


▲ ▼


180


10/06/24 19:56:04 31SNC650_186


To Stop Playing a PC Card To play the radio when a PC card is playing, press the AM/FM button or touch the FM1, FM2, AM, XM1 , or XM2 icon. If a disc is in the audio unit, press the CD/XM button or touch the CD icon to play the disc. Touch the CARD icon to switch back to the PC card player.





U.S. models only


To play an audio unit connected to the auxiliary input jack or the USB adapter cable when a PC card is playing, touch the AUX or USB icon.


If you turn the system off while a PC card is playing, either with the power/volume knob or by turning off the ignition switch, the card will stay in the drive. When you turn the system back on, the card will begin playing where it left off.


Playing a PC Card (Models with navigation system)


When you leave the vehicle, always remove the PC card from the audio unit.


PC Card Player Malfunction If there is a problem with the PC card player, see your dealer.


RemovingaPCCard To remove a PC card from the audio unit, fold back the screen by pressing the OPEN button (see page 162
to remove the card. If you do not remove it from the slot, you cannot return the screen to the upright position.


). Press the eject button (


To return the screen to the upright position, press the CLOSE button.


You can also eject a card when the ignition switch is off.


181


10/06/24 19:56:08 31SNC650_187


PC Card Error Messages (Models with navigation system)


If you see an error message in the display while playing a PC card, find the solution in the chart to the right. If you cannot clear the error message, take your vehicle to your dealer.


Error Message


Solution


FILE ERROR


NO MUSIC


MEDIA ERROR


The system cannot read the file(s). Check the files in the disc. There is a possibility that the files have been damaged. It appears when the PC card is empty or there are no MP3 or WMA files in the PC card. Save the MP3 or WMA files in the PC card. It appears when the unsupported PC card is inserted. The system supports CF card, Flash ATA card, and SanDisk 6-in-1 Card Adapter.


182


10/06/24 19:56:13 31SNC650_188


POWER/VOLUME KNOB


iPod INDICATOR


CD/XM BUTTON


AUDIO BUTTON


Playing an iPod (Models with navigation system)


USB ICON


JOYSTICK


AUDIO DISPLAY


MAP BUTTON


CANCEL BUTTON


183


RPT (REPEAT) BUTTON


RDM (RANDOM) BUTTON


FAST FORWARD BUTTON


SKIP



BUTTON


U.S. model is shown.


REWIND BUTTON


SKIP



BUTTON


10/06/24 19:56:23 31SNC650_189


Playing an iPod (Models with navigation system)


To Play an iPod This audio system can select and play the audio files on the iPod with the same controls used for the in- dash disc player. To play an iPod, connect it to the USB adapter cable in the console compartment by using your dock connector. Press the AUDIO button beside the screen to show the audio display and touch the AUX icon. The ignition switch must be in the ACCESSORY (I) or ON (II) position. The iPod will also be recharged with the ignition switch in these positions.


You can also select an icon by moving the joystick. Move it to left, right, up, or down to change the highlighting and scroll through lists, then press ENT on the top of the joystick to set your selection.


To select the USB mode without using the icon, press the CD/XM button repeatedly. The status bar appears on the bottom of the screen.


The audio system reads and plays playable sound files on the iPod. The system cannot operate an iPod as a mass storage device. The system will only play songs stored on the iPod with iTunes.


iPod and iTunes are registered trademarks owned by Apple Inc.


VoiceControlSystem You can select the AUX mode by using the navigation system voice control buttons, but cannot operate the play mode functions.


iPods compatible with your audio system using the USB adapter cable are:


Model iPod classic (80/160 G) iPod classic (120 G) iPod with video (iPod 5th generation) iPod nano iPod nano 2nd generation iPod nano 3rd generation iPod nano 4th generation iPod nano 5th generation iPod touch iPod touch 2nd generation


Software


Ver. 1.1.2 or more


Ver. 2.0.1 or more


Ver. 1.3.0 or more


Ver. 1.3.1 or more Ver. 1.1.3 or more


Ver. 1.1.3 or more


Ver. 1.0.3 or more


Ver. 1.0.1 or more


Ver. 1.1.5 or more Ver. 2.2.1 or more


184


10/06/24 19:56:33 31SNC650_190


Use only compatible iPods with the latest software. iPods that are not compatible will not work in this audio unit.


NOTE:


Do not connect your iPod using a hub.


Do not keep the iPod in the vehicle. Direct sunlight and high heat will damage it.


Do not use an extension cable between the USB adapter cable equipped with your vehicle and your dock connector.


We recommend backing up your data before playing it.


Some devices cannot be powered or charged via the USB adapter. If this is the case, use the accessory adapter to supply power to your device.


Playing an iPod (Models with navigation system)


In AAC format, DRM (digital rights management) files cannot be played. If the system finds a DRM file, the audio unit displays UNPLAYABLE, and then skips to the next file.


ConnectinganiPod


USB CONNECTOR


CABLE


1.


Pull out the USB connector from the holder and remove the cable from the clip in the console compartment.


CONTINUED


185


10/06/24 19:56:41 31SNC650_191


Playing an iPod (Models with navigation system)


If the iPod indicator does not appear in the audio display, check the connections, and try to reconnect the iPod a few times.


If the audio system still does not recognize the iPod, the iPod may need to be reset. Follow the instructions that came with your iPod, or you can find reset instructions online at itunes/


www.apple.com/


When the iPod is connected and the audio display is selected on the screen by pressing the AUDIO button, the AUX icon switches to the USB icon. The display also shows the current file number and total of the selected playable files, the artist, album and track (file) names on the navigation screen.


USB ADAPTER CABLE


DOCK CONNECTOR


2.


Connect your dock connector to the iPod correctly and securely.


3.


Install the dock connector to the USB adapter cable securely.


186


AUDIO INFO ICON


On the map screen, you can see the audio information whenever you touch the AUDIO INFO icon on the lower part of the screen.


10/06/25 14:55:53 31SNC650_192


ToChangeorSelectFiles


PRESET BUTTONS


U.S. model is shown.


Use the preset buttons while an iPod is playing to select passages and change files. Each preset button’s function is shown on the bottom of the screen.


Playing an iPod (Models with navigation system)



Each time you press and (preset 6 button), the


SKIP release player skips forward to the beginning of the next file. Press and release (preset 5 button), to skip backward to the beginning of the current file. Press it again to skip to the beginning of the previous file.



FF/REW a file, press and hold button) or


To move rapidly within (preset 4


(preset 3 button).


UsingaTrackList


AUDIO DISPLAY


TRACK LIST ICON


U.S. model is shown.


You can also select a file directly from a track list on the audio display. Press the AUDIO button to show the audio display, then touch the Track List icon. The track list menu appears on the display.


CONTINUED


187


10/06/24 19:57:01 31SNC650_193


Playing an iPod (Models with navigation system)


ToSelectaFilefromiPodMenu


iPod MENU ICON U.S. model is shown.


You can also select a file from the iPod menu: playlists, artists, albums and songs. Press the AUDIO button to display the audio display on the navigation screen. Touch the iPod MENU icon to display the iPod menu.


Select a desired list by touching the appropriate icon.


or


▲ ▼


To scroll through the display, touch the icon on the side of the screen. To go back to the previous display, touch the Return icon.


To select a desired icon with the joystick, move it in the appropriate direction, then press ENT.


188


10/06/24 19:57:09 31SNC650_194


Playing an iPod (Models with navigation system)


To select a desired icon with the joystick, move it in the appropriate direction, then press ENT.


If you select ‘‘ALL’’ on either the artists or albums list, all available files on the selected list are played.


ToSelectRepeatorRandomMode: You can select any type of repeat and random modes with the RPT and RDM buttons. To confirm the selected mode, press the AUDIO button to show the audio display on the navigation screen.


Press the AUDIO button to go back to the normal audio playing display. Pressing the CANCEL button goes back to the previous screen, and pressing the MAP button cancels the audio display on the screen.


The display shows the items on that list. Touch a desired file.


or


▲ ▼


To scroll through the display, touch the icon on the side of the screen. To go back to the previous display, touch the Return icon.


CONTINUED


189


10/06/24 19:57:21 31SNC650_195


Playing an iPod (Models with navigation system)


Pressing either SKIP button changes the file while keeping this feature.



This feature


ALBUM RANDOM plays all available albums from the selected items in the iPod menu list (playlists, artists, albums or songs) in random order. The files in each album are played in the recorded order. To activate the album random feature, press and hold the RDM button (Preset 2 button). You will see ‘‘ALBUM RANDOM’’ in the display. To turn it off, press and hold the RDM button (Preset 2 button).


U.S. model is shown.



TRACK RANDOM This feature plays all available tracks/files from the selected items in the iPod menu list (playlists, artists, albums or songs) in random order. To activate track random, press and release the RDM button (preset 2). You will see TRACK RANDOM on the screen.


You can also select another list from the iPod menu while keeping the random function.


NOTE: Available operating functions vary on models or versions. Some functions may not be available on the vehicle’s audio system.


U.S. model is shown.



TRACK REPEAT This feature continuously plays a track/file. To activate track repeat, press and release the RPT button (preset 1). You will see REPEAT in the display. To turn it off, press and release the RPT button again.


Each time you press and release the RPT button, the mode changes between track repeat and normal play.


190


10/06/24 19:57:32 31SNC650_196


Playing an iPod (Models with navigation system)




To Stop Playing Your iPod To play the radio, press the AM/FM button or touch the FM1, FM2, AM, XM1 , or XM2 icon. Touch the CD icon to switch to the disc mode (if a disc is loaded). Each time you press the CD/XM button, the audio mode switches between iPod, disc and XM Radio .



* U.S. models only


If a PC card is in the audio unit, touch the CARD icon to play the PC card.



DisconnectinganiPod You can disconnect the iPod at any time when you see the ‘‘OK to disconnect’’ message in the iPod display. Always make sure you see the ‘‘OK to disconnect’’ message in the iPod display before you disconnect it. Make sure to follow the iPod’s instructions on how to disconnect the dock connector from the USB adapter cable.



The displayed message may vary on models or versions. On some models, there is no message to disconnect.


When you disconnect the iPod while it is playing, the audio screen (if selected) shows NO DATA.


If you reconnect the same iPod, the system may begin playing where it left off, depending on what mode the iPod is in when it is reconnected.


iPod Error Messages If you see an error message in the screen, see page


192


191


10/06/24 19:57:36 31SNC650_197


iPod Error Messages (Models with navigation system)


If you see an error message on the screen while playing an iPod, find the solution in the chart to the right. If you cannot clear the error message, take your vehicle to your dealer.


Error


Message USB ERROR BAD USB DEVICE


PLEASE CHECK


OWNERS MANUAL


Cause


USB ROM Error


Appears when an incompatible device is connected


iPod NO SONG


No files in iPod


UNSUPPORTED


VER.


Use of unsupported iPod


CONNECT


RETRY


Recognition failure of iPod


Solution


There is a problem with the USB adapter unit. Disconnect the device. Then, turn the audio system off, and turn it on again. Do not reconnect the device that caused the error.


Appears when the iPod is empty. Store some files in the iPod. Appears when an unsupported iPod is connected. See page 184 for the specification information for iPods. If it appears when a supported iPod is connected, update the iPod software to the newer version. Appears when the system does not acknowledge the iPod. Reconnect the iPod.


192


Playing a USB Flash Memory Device (Models with navigation system)


USB ICON


10/06/24 19:57:42 31SNC650_198


POWER/VOLUME KNOB


MP3 INDICATOR


AUDIO BUTTON


SCAN BUTTON


TUNE BAR


RPT (REPEAT) BUTTON


RDM (RANDOM) BUTTON


FAST FORWARD BUTTON


SKIP



BUTTON


U.S. model is shown.


REWIND BUTTON TUNE BAR


SKIP



BUTTON


JOYSTICK


TRACK LIST ICON


SOUND ICON


193


10/06/24 19:57:50 31SNC650_199


Playing a USB Flash Memory Device (Models with navigation system)


To Play a USB Flash Memory Device This audio system can select and play the audio files from a USB flash memory device with the same controls used for the in-dash disc player. To play a USB flash memory device, connect it to the USB adapter cable in the console compartment. The ignition switch must be in the ACCESSORY (I) or ON (II) position. Press the AUDIO button beside the screen to show the audio display and touch the AUX icon.


You can also select an icon by moving the joystick. Move it to left, right, up, or down to change the highlighting and scroll through lists, then press ENT on the top of the joystick to set your selection.


To select the USB mode without using the icon, press the CD/XM button repeatedly. The status bar appears on the bottom of the screen.



The audio system reads and plays the audio files on the USB flash memory device in MP3, WMA or AAC formats. Depending on the format, the display shows MP3, WMA or AAC when a USB flash memory device is playing. The USB flash memory device limit is up to 700 folders or up to 65535 files.



Only AAC format files recorded with iTunes are playable on this audio unit.


The recommended USB flash memory devices are 256 MB or higher, and formatted with the FAT file system. Some digital audio players may be compatible as well.


Some USB flash memory devices (such as devices with security lock- out features, etc.) will not work in this audio unit.


194


10/06/24 19:58:02 31SNC650_200


Playing a USB Flash Memory Device (Models with navigation system)


NOTE:


Do not use a device such as a card reader or hard drive as the device or your files may be damaged.


Do not connect your USB flash memory device using a hub.


Do not use an extension cable to the USB adapter cable equipped with your vehicle.


Do not keep a USB flash memory device in the vehicle. Direct sunlight and high heat will damage it.


We recommend backing up your data before playing a USB flash memory device.


Depending on the type and number of files, it may take some time before they begin to play.


Depending on the software the files were made with, it may not be possible to play some files, or display some text data.


Some devices cannot be powered or charged via the USB adapter. If this is the case, use the accessory adapter to supply power to your device.


Depending on the type of encoding and writing software used, there may be cases where character information does not display properly.


VoiceControlSystem You can select the AUX mode by using the navigation system voice control buttons, but cannot operate the play mode functions.


CONTINUED


195


10/06/24 19:58:11 31SNC650_201


Playing a USB Flash Memory Device (Models with navigation system)


Some versions of MP3, WMA, or AAC format may not be supported. If an unsupported file is found, the audio unit displays UNSUPPORTED, then skips to the next file.


In WMA or AAC format, DRM (digital rights management) files cannot be played. If the system finds a DRM file, the screen displays UNPLAYABLE FILE, and then skips to the next file.


ConnectingaUSBFlashMemory Device


USB CONNECTOR


CABLE


1.


Pull out the USB connector from the holder and remove the cable from the clip in the console compartment.


196


USB ADAPTER CABLE


2.


Connect the USB flash memory device to the USB adapter cable correctly and securely.


When the USB device is connected and the audio display is selected on the screen by pressing the AUDIO button, the AUX icon switches to the USB icon. The display also shows the folder and file numbers, and the elapsed time.


10/06/25 14:56:00 31SNC650_202


Playing a USB Flash Memory Device (Models with navigation system)


ToChangeorSelectFiles


AUDIO INFO ICON


On the map screen, you can see the audio information whenever you touch the AUDIO INFO icon on the lower part of the screen.


PRESET BUTTONS


U.S. model is shown.


Use the preset buttons while a USB flash memory device is playing to select passages and change files. Each preset button’s function is shown on the bottom of the screen.



Each time you press and (preset 6 button), the


SKIP release player skips forward to the beginning of the next file. Press and release (preset 5 button), to skip backward to the beginning of the current file. Press it again to skip to the beginning of the previous file.



FF/REW a file, press and hold button) or


To move rapidly within (preset 4


(preset 3 button).


CONTINUED


197


10/06/24 19:58:29 31SNC650_203


Playing a USB Flash Memory Device (Models with navigation system)



To


FOLDER SELECTION select a different folder, press either side of the TUNE bar. Press the


side to skip to the next folder, side to skip to the


and press the beginning of the previous folder.




ToSelectaFilefromFolderandFile Lists


FOLDER ICON


TRACK LIST ICON


U.S. model is shown.


You can also select a folder and file from the lists shown on the screen. Press the AUDIO button to show the audio display on the navigation screen.


Touch the Track List icon to switch the display to the folder list, then select and touch a desired folder.


198


Playing a USB Flash Memory Device (Models with navigation system)


10/06/24 19:58:39 31SNC650_204


FOLDER ICON


or


▲ ▼


To scroll through the display, touch the icon on the side of the screen. To go back to the previous display, touch the Return icon.


To select a desired icon with the joystick, move it in the appropriate direction, then press ENT.


Press the AUDIO button to go back to the normal audio playing display. Pressing the CANCEL button goes back to the previous screen, and pressing the MAP button cancels the audio display on the screen.


The display changes to the file list. Then, select and touch a desired file.


Touch the folder icon on the upper left of the screen to move to the parent folder.


ToSelectRepeat,RandomorScan Mode: You can select any type of repeat, random and scan modes with the RPT, RDM and SCAN buttons. To confirm the selected mode, press the AUDIO button to show the audio control display on the navigation screen.



TRACK REPEAT This feature continuously plays a track/file. To activate track repeat, press and release the RPT button (preset 1). You will see TRACK REPEAT in the display.


CONTINUED


199


10/06/24 19:58:46 31SNC650_205


Playing a USB Flash Memory Device (Models with navigation system)


Press and hold the button until you hear a beep to turn off either repeat mode. Pressing either side of the TUNE bar also turns off this feature.



TRACK RANDOM This feature plays all the tracks/files in random order. To activate track random, press and release the RDM button (preset 2). You will see TRACK RANDOM in the display.



This


FOLDER RANDOM feature plays the tracks/files in the selected folder in random order. To activate folder random, press and hold the RDM button (preset 2) until you see FOLDER RANDOM in the display.


Press and hold the button until you hear a beep to turn off either random mode.


U.S. model is shown.



This feature


FOLDER REPEAT replays all the tracks/files in the selected folder in the order they are stored. To activate folder repeat, press and hold the RPT button (preset 1) until you see FOLDER REPEAT in the display.


200


10/06/24 19:58:56 31SNC650_206


Playing a USB Flash Memory Device (Models with navigation system)


Press and hold the button until you hear a beep to turn off either scan mode. Pressing either SKIP button also turns off this feature.



This feature


TRACK SCAN samples all tracks/files in the selected folder in the order they are stored. To activate track scan, press and release the SCAN button. You will see TRACK SCAN in the display. You will get a 10 second sampling of each track/file in the folder.



FOLDER-SCAN This feature samples the first track/file in each folder in the order they are stored. To activate folder scan, press and hold the SCAN button until you see FOLDER SCAN in the display. You will get a 10 second sampling of each first track/file in the folder(s).



To Stop Playing a USB Flash Memory Device To play the radio, press the AM/FM button or touch the FM1, FM2, AM, XM1 , or XM2 icon. Press the CD icon to switch to the disc mode (if a disc is loaded). Each time you press the CD/XM button, the audio mode switches between the USB, disc and XM Radio .





U.S. models only


If a PC card is in the audio unit, touch the CARD icon to play the PC card.


CONTINUED


201


10/06/24 19:59:02 31SNC650_207


Playing a USB Flash Memory Device (Models with navigation system)


USB Flash Memory Device Error Messages If you see an error message in the screen, see page


203


DisconnectingaUSBFlashMemory Device You can disconnect the USB flash memory device at any time even if the USB mode is selected on the audio system. Make sure to follow the USB flash memory device’s instructions when you remove it.


When you disconnect the USB flash memory device while it is playing, the audio display (if selected) shows NO DATA.


If you reconnect the same USB flash memory device, the system will begin playing where it left off.


202


10/06/24 19:59:07 31SNC650_208


USB Flash Memory Device Error Messages (Models with navigation system)


If you see an error message on the screen while playing a USB flash memory device, find the solution in the chart to the right. If you cannot clear the error message, take your vehicle to your dealer.


Error


Message USB ERROR BAD USB DEVICE


PLEASE CHECK


OWNERS MANUAL


Cause


USB ROM Error


Appears when an incompatible device is connected


UNPLAYABLE


Use of unsupported files


FILE


USB NO SONG


No files in USB flash memory device


UNSUPPORTED


Use of unsupported USB flash memory device


Solution


There is a problem with the USB adapter unit. Disconnect the device. Then, turn the audio system off, and turn it on again. Do not reconnect the device that caused the error.


Appears when the files in the USB flash memory device are DRM or an unsupported format. This error message appears for about 3
seconds, then plays the next song. Appears when the USB flash memory device is empty or there are no MP3, WMA, or AAC files in the USB flash memory device. Save some MP3, WMA, or AAC files in the USB flash memory device. Appears when an unsupported device is connected. See page 194 for the specification information for the USB flash memory device. If it appears when the supported device is connected, reconnect the device.


203


10/06/24 19:59:18 31SNC650_209


AM/FM Radio Reception


Radio Frequencies The radio can receive the complete AM and FM bands. Those bands cover these frequen- cies:


AM band: 530 to 1,710 kHz FM band: 87.7 to 107.9 MHz


Radio stations on the AM band are assigned frequencies at least 10 kHz apart (530, 540, 550). Stations on the FM band are assigned frequencies at least 0.2 MHz apart (87.9, 88.1, 88.3).


Stations must use these exact frequencies. It is fairly common for stations to round-off the frequency in their advertising, so your radio could display a frequency of 100.9 even though the announcer may identify the station as ‘‘FM101.’’


204


AM/FM Radio Reception How well the radio receives stations is dependent on many factors, such as the distance from the station’s transmitter, nearby large objects, and atmospheric conditions.


A radio station’s signal gets weaker as you get farther away from its transmitter. If you are listening to an AM station, you will notice the sound volume becoming weaker, and the station drifting in and out. If you are listening to an FM station, you will see the stereo indicator flickering off and on as the signal weakens. Eventually, the stereo indicator will go off and the sound will fade completely as you get out of range of the station’s signal.


Driving very near the transmitter of a station that is broadcasting on a frequency close to the frequency of the station you are listening to can also affect your radio’s reception. You may temporarily hear both stations, or hear only the station you are close to.


10/06/24 19:59:25 31SNC650_210


Radio signals, especially on the FM band, are deflected by large objects such as buildings and hills. Your radio then receives both the direct signal from the station’s transmitter, and the deflected signal. This causes the sound to distort or flutter. This is a main cause of poor radio reception in city driving.


Radio reception can be affected by atmospheric conditions such as thunderstorms, high humidity, and even sunspots. You may be able to receive a distant radio station one day and not receive it the next day because of a change in conditions.


AM/FM Radio Reception


Electrical interference from passing vehicles and stationary sources can cause temporary reception problems.


AsrequiredbytheFCC: Changesormodificationsnotexpressly approvedbythepartyresponsiblefor compliancecouldvoidtheuser’s authoritytooperatetheequipment.


205


10/06/24 19:59:38 31SNC650_211


Protecting Your Discs


General Information


When using CD-R or CD-RW discs, use only high quality discs labeled for audio use.


When recording a CD-R or CD-RW, the recording must be closed for it to be used by the system.


Play only standard round discs. Odd-shaped discs may jam in the drive or cause other problems.


Handle your discs properly to prevent damage and skipping.


Do not use discs with adhesive labels. The label can curl up and cause the disc to jam in the unit.


206


Protecting Discs When a disc is not being played, store it in its case to protect it from dust and other contamination. To prevent warpage, keep discs out of direct sunlight and extreme heat.


To clean a disc, use a clean soft cloth. Wipe across the disc from the center to the outside edge.


A new disc may be rough on the inner and outer edges. The small plastic pieces causing this roughness can flake off and fall on the recording surface of the disc, causing skipping or other problems. Remove these pieces by rubbing the inner and outer edges with the side of a pencil or pen.


Never try to insert foreign objects in the disc player.


Handle a disc by its edges; never touch either surface. Do not place stabilizer rings or labels on the disc. These, along with contamination from finger prints, liquids, and felt- tip pens, can cause the disc to not play properly, or possibly jam in the drive.


10/06/24 19:59:52 31SNC650_212


Additional Information on Recommended Discs The in-dash disc player/changer has a sophisticated and delicate mechanism. If you insert a damaged disc as indicated in this section, it may become stuck inside and damage the audio unit.


Examples of these discs are shown to the right:


Protecting Your Discs


1.


Bubbled, wrinkled, labeled, and excessively thick discs


Bubbled/ Wrinkled


With Label/ Sticker


Using Printer Label Kit


Sealed


With Plastic Ring


2.


Damaged discs


3.


Poor quality discs


Chipped/ Cracked


Warped


Burrs


CONTINUED


207


10/06/24 20:00:06 31SNC650_213


Protecting Your Discs


4.


Small, irregular shaped discs


5.


Discs with scratches, dirty discs


Recommended discs are printed with the following logo.


3-inch (8-cm) CD


Triangle Shape


Audio unit may not play the following formats.


Fingerprints, scratches, etc.


CD-R or CD-RW may not play due to the recording conditions.


Scratches and fingerprints on the discs may cause the sound to skip.


Can Shape


Arrow Shape


208


10/06/24 20:00:13 31SNC650_214


Your vehicle’s audio system will disable itself if it is disconnected from electrical power for any reason. To make it work again, you must enter a specific five-digit code (or a four-digit code for models with a navigation system) in the preset buttons. Because there are hundreds of number combinations possible from five or four-digits, making the system work without knowing the exact code is nearly impossible.


You should have received a card that lists your audio system’s code and serial numbers. It is best to store this card in a safe place at home. In addition, you should write the audio system’s serial number in this owner’s manual.


If you lose the card, you must obtain the code number from a dealer. To do this, you will need the system’s serial number.


If your vehicle’s battery is disconnected or goes dead, the audio system will disable itself. Use the preset buttons to enter the five-digit code (or a four-digit code for models with a navigation system). The code is on the radio code card included in your owner’s manual kit. When it is entered correctly, the radio will start playing.


Radio Theft Protection


If you make a mistake entering the code, do not start over; complete the five-digit (or a four-digit code for models with a navigation system) sequence, then enter the correct code. You have 10 tries to enter the correct code. If you are unsuccessful in 10 attempts, you must then leave the system on for 1 hour before trying again.


Loading...
x