2003 Honda Civic Hybrid Owners Manual

Dolby noise reduction manufactured under

license from Dolby Laboratories Licensing Corpo- ration. ‘‘DOLBY’’ and the double-D symbol are trademarks of Dolby Laboratories

Licensing Corporation.

Audio System

CD/TAPE BUTTON

REPEAT INDICATOR

AM/FM BUTTON

NOISE REDUCTION INDICATOR

REPEAT BUTTON

PWR/VOL KNOB

FF BUTTON

NR BUTTON

SKIP BAR

PLAY/PROG BUTTON

REW BUTTON

CONTINUED

Comfort and Convenience Features

133

Main MenuTable of Contentsst０２／０２／０１　１５：２２：３１　３１Ｓ５Ｂ６００　０１３７　

If you turn the system off while a tape is playing, either with the PWR/ VOL knob or by turning off the ignition, the cassette will remain in the drive. When you turn the system back on, the cassette player will be in pause mode. To begin playing, press the PLAY/PROG button.

To switch to the radio or CD player while a tape is playing, press the AM/FM, or CD/TAPE button. To change back to the cassette player, press the CD/TAPE button.

Tape Search Functions With a cassette playing, you can use the FF, REW, SKIP, or REPEAT function to find a desired program.

−

FF/REW Fast Forward and Re- wind move the tape rapidly. To re- wind the tape, push the REW button. You will see REW in the display. To fast forward the tape, push the FF button. You will see FF displayed. Press the PLAY/PROG button to take the system out of rewind or fast forward. If the system reaches the end of the tape while in fast forward or rewind, it automatically stops that function, reverses direction, and begins to play.

Audio System

The tape direction indicator will light to show you which side of the cassette is playing. The indicates the side you inserted facing upward is now playing. If you want to play the other side, press the PLAY/ PROG button.

▲

Dolby noise reduction turns on when you insert a cassette. The indi- cator will light in the display. If the tape was not recorded with Dolby noise reduction, turn it off by pressing the NR button.

Noise reduction remains off until you turn it on by pressing the button again.

When the system reaches the end of the tape, it will automatically reverse direction and play the other side. If you want to remove the cassette from the drive, press the EJECT button on the cassette player.

134

Comfort and Convenience Features

Main MenuTable of Contentsst０２／０２／０１　１５：２２：３７　３１Ｓ５Ｂ６００　０１３８　

−

SKIP The Skip Function allows you to find the beginning of a song or passage. To find the beginning of the song or passage currently playing, push the lower part of the SKIP bar. You will see REW flashing in the display as the tape rewinds. To find the beginning of the next song, push the upper part of the SKIP bar. You will see FF flashing in the display as the tape fast forwards. When the system finds the beginning of a song or passage, it goes back to PLAY mode.

−

The Repeat function

REPEAT continuously replays the current song or passage. Press the RPT button to activate it; you will see RPT displayed as a reminder. When the system reaches the end of the song or passage currently playing, it will automatically go into rewind. When it senses the beginning of the same song or passage, the system returns to PLAY mode. It will continue to repeat this same program until you deactivate REPEAT by pressing the button again.

Audio System

The SKIP and REPEAT functions use silent periods on the tape to find the end of a song or passage. These features may not work to your satisfaction if there is almost no gap between selections, a high noise level between selections, or a silent period in the middle of a selection.

Comfort and Convenience Features

135

Main MenuTable of Contentsst０２／０２／０１　１５：２２：４７　３１Ｓ５Ｂ６００　０１３９　

Audio System

Caring for the Cassette Player The cassette player picks up dirt and oxides from the tape. This contami- nation builds up over time and causes the sound quality to degrade. To prevent this, you should clean the player after every 30 hours of use. Your dealer has a cleaning kit available.

If you do not clean the cassette player regularly, it may eventually become impossible to remove the contamination with a normal cleaning kit.

Use 100-minute or shorter cassettes. Cassettes longer than that use thinner tape that may break or jam the drive.

136

Comfort and Convenience Features

Look at the cassette before you insert it. If the tape is loose, tighten it by turning a hub with a pencil or your finger.

If the label is peeling off, remove it from the cassette or it could cause the cassette to jam in the player. Never try to insert a warped or damaged cassette in the player.

When they are not in use, store cassettes in their cases to protect them from dust and moisture. Never place cassettes where they will be exposed to direct sunlight, high heat, or high humidity. If a cassette is exposed to extreme heat or cold, let it reach a moderate temperature before inserting it in the player.

Never try to insert foreign objects into the cassette player.

If you see the error indication ‘‘ ’’ on the display, press the EJECT button and remove the cassette from the unit. Make sure the tape is not damaged. If the cassette will not eject or the error indication stays on after the cassette ejects, take the car to your Honda dealer.

Main MenuTable of Contentsst０２／０２／０１　１５：２２：５５　３１Ｓ５Ｂ６００　０１４０　

Theft Protection Your car’s audio system will disable itself if it is disconnected from electrical power for any reason. To make it work again, the user must enter a specific five-digit code in the Preset buttons. Because there are hundreds of number combinations possible from five digits, making the system work without knowing the exact code is nearly impossible.

You should have received a card that lists your audio system’s code number and serial number. It is best to store this card in a safe place at home. In addition, you should write the audio system’s serial number in this Owner’s Manual. If you should happen to lose the card, you must obtain the code number from your Honda dealer. To do this, you will need the system’s serial number.

If your car’s battery is disconnected or goes dead, or the radio fuse is removed, the audio system will disable itself. If this happens, you will see ‘‘ display the next time you turn on the system. Use the Preset buttons to enter the five-digit code. If it is entered correctly, the radio will start playing.

’’ in the frequency

If you make a mistake entering the code, do not start over or try to correct your mistake. Complete the five-digit sequence, then enter the correct code. You have ten tries to enter the correct code. If you are unsuccessful in ten attempts, you must then leave the system on for one hour before trying again.

Audio System

You will have to store your favorite stations in the Preset buttons after the system begins working. Your original settings were lost when power was disconnected.

CONTINUED

Comfort and Convenience Features

137

Main MenuTable of Contentsst０２／０２／０１　１５：２３：０３　３１Ｓ５Ｂ６００　０１４１　

After you have entered the audio system’s code number correctly, the serial number will not be displayed.

Audio System

DisplayingAudioSystem’sSerial Number When the audio system disables itself, you can see the eight-digit audio system serial number on the display. To display the serial number:

1.

Turn the ignition switch to ACCESSORY (I) or ON (II).

2.

3.

Push the PWR/VOL knob to turn on the audio system while pressing the Preset 1 and 6
buttons at the same time.

You will see the first 4-digit number on the display for five seconds, then the next 4-digit number is shown for five seconds. You will see 8-digit serial number in total. This procedure is repeated once again.

138

Comfort and Convenience Features

Main MenuTable of Contentsst０２／０２／０１　１５：２３：１２　３１Ｓ５Ｂ６００　０１４２　

Cruise control allows you to maintain a set speed above 25 mph (40 km/h) without keeping your foot on the accelerator pedal. It should be used for cruising on straight, open highways. It is not recommended for conditions such as city driving, winding roads, slippery roads, heavy rain, or bad weather. You should have full control of the car under those conditions.

Improper use of the cruise control can lead to a crash.

Use the cruise control only when traveling on open highways in good weather.

Cruise Control

UsingtheCruiseControl

1.

Push in the Cruise Control Master Switch to the left of the steering column. The indicator in the switch will light.

2.

Accelerate to the desired cruising speed above 25 mph (40 km/h).

CONTINUED

Comfort and Convenience Features 139

Main MenuTable of Contentsst０２／０２／０１　１５：２３：２３　３１Ｓ５Ｂ６００　０１４３　

Cruise Control

The cruise control may not hold the set speed when you are going up and down hills. If your speed increases going down a hill, use the brakes to slow down to the desired speed. This will cancel the cruise control. To resume the set speed, press the RESUME/accel button. The CRUISE CONTROL light on the instrument panel comes on.

When climbing a steep hill, the automatic transmission may downshift to hold the set speed.

ChangingtheSetSpeed You can increase the set cruising speed in any of these ways:

Press and hold the RESUME/ accel button. The car will acceler- ate. When you reach the desired cruising speed, release the button.

To increase your speed in very small amounts, tap the RESUME/ accel button repeatedly. Each time you do this, your car will speed up about 1 mph (1.6 km/h).

Push on the accelerator pedal. Ac- celerate to the desired cruising speed and press the SET/decel button.

RESUME/ accel SET/decel

3.

Press and release the SET/decel button on the steering wheel. The CRUISE CONTROL light on the instrument panel comes on to show the system is now activated.

140

Comfort and Convenience Features

Main MenuTable of Contentsst０２／０２／０１　１５：２３：３４　３１Ｓ５Ｂ６００　０１４４　

Even with the cruise control turned on, you can still use the accelerator pedal to speed up for passing. After completing the pass, take your foot off the accelerator pedal. The car will return to the set cruising speed.

Resting your foot on the brake or clutch pedal will cause the cruise control to cancel.

You can decrease the set cruising speed in any of these ways:

Press and hold the SET/decel button. The car will decelerate. Release the button when you reach the desired speed.

To slow down in very small amounts, tap the SET/decel button repeatedly. Each time you do this, your car will slow down about 1 mph (1.6 km/h).

Tap the brake or clutch pedal lightly with your foot. The CRUISE CONTROL light on the instrument panel will go out. When the car slows to the desired speed, press the SET/decel button. The car will then maintain the desired speed.

Cruise Control

CancellingtheCruiseControl

CANCEL BUTTON

You can cancel the cruise control in any of these ways:

Tap the brake or clutch pedal.

Push the CANCEL button on the steering wheel.

Press the Cruise Control Master Switch.

CONTINUED

Comfort and Convenience Features 141

Main MenuTable of Contentsst０２／０２／０１　１５：２３：３９　３１Ｓ５Ｂ６００　０１４５　

Pressing the Cruise Control Master Switch turns the system completely off and erases the previous cruising speed from memory. To use the system again, refer to Usingthe CruiseControl

Cruise Control

When you push the CANCEL button, or tap the brake or clutch pedal, the CRUISE CONTROL light on the instrument panel will go out and the car will begin to slow down. You can use the accelerator pedal in the normal way.

The system remembers the previously-set cruising speed. To return to that speed, accelerate to above 25 mph (40 km/h), then press the RESUME/accel button. The CRUISE CONTROL light comes on, and the car will accelerate to the same cruising speed as before.

142

Comfort and Convenience Features

Main MenuTable of Contentsst０２／０２／０１　１５：２３：４４　３１Ｓ５Ｂ６００　０１４６　

Before Driving

Before you begin driving your Honda, youshouldknowwhatgasolineto use, and how to check the levels of important fluids. You also need to know how to properly store luggage or packages. The information in this section will help you. If you plan to add any accessories to your car, please read the information in this section first.

Filling the Fuel Tank Opening the Hood

Break-in Period Gasoline Service Station Procedures

. 144
. 144
. 145
. 145
. 146
. 148
. 149
. 150
. 150
. 150
Accessories and Modifications . 152
. 154
Carrying Cargo

............................. ......................................... ......... ................ .................... ............................... ......... ............................... ..................... ........................... ... .............................

Oil Check Engine Coolant Check

Vehicle Condition Driving Habits

Fuel Economy

Before Driving 143

Main Menust０２／０２／０１　１５：２３：５５　３１Ｓ５Ｂ６００　０１４７　

In Canada, some gasolines contain an octane-enhancing additive called MMT. If you use such gasolines, your emission control system performance may deteriorate and the Malfunction Indicator Lamp on your instrument panel may turn on. If this happens, contact your authorized Honda dealer for service.

Gasoline Your Honda is designed to operate on unleaded gasoline with a pump octane number of 86 or higher. Use of a lower octane gasoline can cause a persistent, heavy metallic rapping noise in the engine that can lead to mechanical damage.

We recommend gasolines containing detergent additives that help prevent fuel system and engine deposits.

Using gasoline containing lead will damage your car’s emissions controls. This contributes to air pollution.

Break-in Period, Gasoline

Break-in Period Help assure your car’s future reliability and performance by paying extra attention to how you drive during the first 600 miles (1,000 km). During this period:

Avoid full-throttle starts and rapid acceleration.

Avoid hard braking. New brakes need to be broken-in by moderate use for the first 200 miles (300
km).

Do not change the oil until the recommended time or mileage interval shown in the maintenance schedule.

You should follow these same re- commendations with an overhauled or exchanged engine, or when the brakes are relined.

144

Before Driving

Main MenuTable of Contentsst０２／０２／０１　１５：２４：０７　３１Ｓ５Ｂ６００　０１４８　

Filling the Fuel Tank

Push

1.

Because the fuel fill cap is on the driver’s side of the car, park with that side closest to the service station pumps.

2.

Open the fuel fill door by pushing on the handle to the left of the driver’s seat.

Gasoline is highly flammable and explosive. You can be burned or seriously injured when handling fuel.

Stop the engine and keep heat, sparks, and flame away. Handle fuel only outdoors. Wipe up spills immediately.

HOLDER

FUEL FILL CAP

Service Station Procedures

3.

4.

Remove the fuel fill cap slowly. You may hear a hissing sound as pressure inside the tank escapes. Place the cap in the holder on the fuel fill door.

Stop filling the tank after the fuel nozzle automatically clicks off. Do not try to ‘‘top off’’ the tank, leave some room for the fuel to expand with temperature changes.

Your car has an on-board refueling vapor recovery system to help keep fuel vapors from going into the atmosphere. If the fuel nozzle keeps clicking off even though the tank is not full, there may be a problem with this system. Consult your dealer.

CONTINUED

Before Driving 145

Main MenuTable of Contentsst０２／０２／０１　１５：２４：１７　３１Ｓ５Ｂ６００　０１４９　

Service Station Procedures

Opening the Hood

HOOD RELEASE HANDLE

LATCH

1.

Shift to Park or Neutral and set the parking brake. Pull the hood release handle located under the lower left corner of the dashboard. The hood will pop up slightly.

2.

Standing in front of the car, put your fingers between the front edge of the hood and the front grille. The hood latch handle is above the ‘‘H’’ logo. Push this handle up until it releases the hood. Lift the hood.

5.

Screw the fuel fill cap back on, tighten it until it clicks several times. If you do not properly tighten the cap, the Malfunction Indicator Lamp may come on (see page

273

).

6.

Push the fuel fill door closed until it latches.

146

Before Driving

Main MenuTable of Contentsst０２／０２／０１　１５：２４：２５　３１Ｓ５Ｂ６００　０１５０　

If you can open the hood without lifting the hood latch handle, or the hood latch handle moves stiffly or does not spring back as before, the mechanism should be cleaned and lubricated (see page

212

).

GRIP

Service Station Procedures

To close the hood, lift it up slightly to remove the support rod from the hole. Put the support rod back into its holding clip. Lower the hood to about a foot (30 cm) above the fender, then let it drop.

After closing the hood, make sure it is securely latched.

SUPPORT ROD

CLIP

3.

Pull the support rod out of its clip by holding the grip and insert the end into the hole on the front left side of the hood.

CONTINUED

Before Driving 147

Main MenuTable of Contentsst０２／０２／０１　１５：２４：３４　３１Ｓ５Ｂ６００　０１５１　

Service Station Procedures

OilCheck

DIPSTICK

2.

Wipe the dipstick with a clean cloth or paper towel.

3.

Insert it all the way back in its tube.

Check the engine oil level every time you fill the car with fuel. Wait a few minutes after turning the engine off before you check the oil.

1.

Remove the dipstick (orange handle).

148

Before Driving

Main MenuTable of Contentsst０２／０２／０１　１５：２４：４３　３１Ｓ５Ｂ６００　０１５２　

Service Station Procedures

UPPER MARK LOWER MARK

4.

Remove the dipstick again and check the level. It should be between the upper and lower marks.

If it is near or below the lower mark, see

Adding Oil

on page

195

Owner Maintenance on page

Refer to Checks on checking other items in your Honda.

193

for information

EngineCoolantCheck

RESERVE TANK MAX

MIN

Look at the coolant level in the radiator reserve tank. Make sure it is between the MAX and MIN lines. If Adding it is below the MIN line, see Engine Coolant for 199
information on adding the proper coolant.

on page

Before Driving 149

Main MenuTable of Contentsst０２／０２／０１　１５：２４：５２　３１Ｓ５Ｂ６００　０１５３　

Fuel Economy

The condition of your car and your driving habits are the two most important things that affect the fuel mileage you get.

Vehicle Condition Always maintain your car according to the maintenance schedule. This will keep it in top operating condition.

193

(see page

Owner Maintenance

An important part of that mainte- nance is the Checks ). For example, an underinflated tire causes more ‘‘rolling resistance,’’ which uses fuel. It also wears out faster, so check the tire pressure at least monthly.

150

Before Driving

Engine oil also affects fuel economy. The fuel efficient, low-viscosity 0W-20 oil recommended for your Civic Hybrid is formulated to help the engine use less fuel. This oil is available at your Honda dealer.

In winter, the build-up of snow on your car’s underside adds weight and rolling resistance. Frequent cleaning helps your fuel mileage and reduces the chance of corrosion.

Driving Habits You can improve fuel economy by driving moderately. Rapid acceler- ation, abrupt cornering, and hard braking use more fuel.

To get the best fuel mileage, drive in the highest gear that is practical for the speed you are driving, and always accelerate slowly.

You may find that your Civic Hybrid’s unique combination of an engine and an electric motor has driving characteristics that are somewhat different from what you are used to. Shift Up and Shift Down indicators (5-speed manual transmission only) on the instrument panel show when to shift to a higher or lower gear. By shifting as soon as the indicator comes on, you will keep the engine operating in its most economical range.

Main MenuTable of Contentsst０２／０２／０１　１５：２５：００　３１Ｓ５Ｂ６００　０１５４　

The air conditioning puts an extra load on the engine which makes it use more fuel. Turn off the A/C to cut down on air conditioning use. Use the flow-through ventilation when the outside air temperature is moderate.

If air conditioning is needed, you can save some fuel by using the A/C in ‘‘ECON’’ mode. When the outside temperature is above 41°F (5°C), this mode allows the Auto Idle Stop function to shut off the engine when the vehicle is stopped, resulting in fuel savings.

Depending on traffic conditions, try to maintain a constant speed. Every time you slow down and speed up, your car uses extra fuel. Use the cruise control, when appropriate, to increase fuel economy.

Wind resistance causes vehicles to use more fuel at higher speeds. Driving at moderate speeds on the highway reduces wind resistance and conserves fuel.

A cold engine uses more fuel than a warm engine. It is not necessary to ‘‘warm-up’’ a cold engine by letting it idle for a long time. You can drive away in about a minute, no matter how cold it is outside. The engine will warm up faster, and you get better fuel economy. To cut down on the number of ‘‘cold starts,’’ try to combine several short trips into one.

Fuel Economy

You may notice that using the A/C causes a greater drop in fuel economy than you are used to in other vehicles. Although the amount of extra fuel used by the A/C load on the engine is no greater than other vehicles, it is more noticeable because of your Civic Hybrid’s excellent fuel mileage. Using the A/C in hot weather may result in fuel economy that is lower than expected.

Before Driving 151

Main MenuTable of Contentsst０２／０２／０１　１５：２５：１０　３１Ｓ５Ｂ６００　０１５５　

Accessories and Modifications

Modifying your car, or installing some non-Honda accessories, can make your car unsafe. Before you make any modifications or add any accessories,besuretoreadthe following information.

Accessories Your dealer has Honda accessories that allow you to personalize your car. These accessories have been designed and approved for your car, and are covered by warranty.

Non-Honda accessories are usually designed for universal applications. Although aftermarket accessories may fit on your car, they may not meet factory specifications, and could adversely affect your car’s handling and stability. (See ‘‘Modifications’’ on page 153
additional information.)

for

152

Before Driving

Improper accessories or modifications can affect your car’s handling, stability and performance, and cause a crash in which you can be hurt or killed.

Follow all instructions in this owner’s manual regarding accessories and modifications.

When properly installed, cellular phones, alarms, two-way radios, and low-powered audio systems should not interfere with your car’s computer-controlled systems, such as the SRS and anti-lock brake system.

However, if electronic accessories are improperly installed, or exceed your car’s electrical system capacity, they can interfere with the operation of your car, or even cause the airbags to deploy.

Before installing any accessory:

Make sure the accessory does not obscure any lights, or interfere with proper car operation or performance.

Be sure electronic accessories do not overload electrical circuits (see page

276

).

Have the installer contact your Honda dealer for assistance before installing any electronic accessory.

If possible, have your dealer inspect the final installation.

Main MenuTable of Contentsst０２／０２／０１　１５：２５：２０　３１Ｓ５Ｂ６００　０１５６　

Accessories and Modifications

Modifications Do not remove any original equipment or modify your car in any way that would alter its design or operation. This could make your car unsafe and illegal to drive.

In addition, any modifications that decrease ground clearance increase the chance of undercarriage parts striking a curb, speed bump, or other raised object, which could cause your airbags to deploy.

For example, do not make any modifications that would change the ride height of your car, or install wheels and tires with a different overall diameter.

Do not modify your steering wheel or any other part of your Supplemental Restraint System. Modifications could make the system ineffective.

Such modifications can adversely affect handling, and interfere with the operation of the car’s anti-lock brakes and other systems.

Additional Safety Precautions

Donotattachorplaceobjectson Any object thefrontairbagcovers. attached to or placed on the covers marked ‘‘SRS AIRBAG,’’ in the center of the steering wheel and on top of the dashboard, could interfere with the proper operation of the airbags. Or, if the airbags inflate, the objects could be propelled inside the car and hurt someone.

OnlyonU.S.modelsequippedwithside airbags

Donotattachhardobjectsonor If a side airbag nearafrontdoor. inflates, a cup holder or other hard object attached on or near the door could be propelled inside the car and hurt someone.

Donotplaceanyobjectsoverthe outsideedgeofafrontseat-back. Covering the outside edge of a front seat-back, with a non-Honda seat cover for example, could prevent the airbag from inflating properly.

Before Driving 153

Main MenuTable of Contentsst０２／０２／０１　１５：２５：２７　３１Ｓ５Ｂ６００　０１５７　

Carrying Cargo

CONSOLE COMPARTMENT

FRONT DOOR POCKET

TRUNK

SEAT-BACK POCKET

GLOVE BOX

154

Before Driving

Your car has several convenient storage areas so you can stow cargo safely.

The glove box, and the pockets in the front doors and seat-back, are designed for small, lightweight items. The trunk is intended for larger, heavier items.

However, carrying too much cargo, or improperly storing it, can affect your car’s handling, stability, and operation and make it unsafe. Before carrying any type of cargo, be sure to read the following pages.

Main MenuTable of Contentsst０２／０２／０１　１５：２５：３８　３１Ｓ５Ｂ６００　０１５８　

Overloading or improper loading can affect handling and stability and cause a crash in which you can be hurt or killed.

Follow all load limits and other loading guidelines in this manual.

Load Limit The maximum load for your car is 850 lbs in U. S. models and 395 kg in Canadian models.

This figure includes the total weight of all occupants, cargo, and accessories.

To figure out how much cargo you can carry:

Add up the weight of all occupants.

Subtract the total from 850 lbs in U.S. models and 395 kg in Canadian models.

The final number is the total weight of cargo you can carry.

Carrying Cargo

Carrying Items in the Passenger Compartment

Store or secure all items that could be thrown around and hurt someone during a crash.

Do not put any items on top of the trunk panel. They can block your view and be thrown around the car during a crash.

Be sure items placed on the floor behind the front seats cannot roll under the seats and interfere with the driver’s ability to operate the pedals, or with the proper operation of the seats.

Keep the glove box closed while driving. If the lid is open, a passenger could injure their knees during a crash or sudden stop.

Before Driving 155

Main MenuTable of Contentsst０２／０２／０１　１５：２５：４４　３１Ｓ５Ｂ６００　０１５９　

Carrying Cargo

Carrying Cargo in the Trunk or on a Roof Rack

Distribute cargo evenly on the floor of the trunk, placing the heaviest items on the bottom and as far forward as possible.

If you can carry any items on a roofrack,besurethetotalweight of the rack and the items does not exceed the maximum allowable weight. Please contact your Honda dealer for further information.

Tie down items that could be thrown about the car during a crash or sudden stop.

If you carry large items that prevent you from closing the trunk lid, exhaust gas can enter the passenger area. To avoid the possibility of carbon monoxide poisoning, follow the instructions on page

.54

156

Before Driving

Main MenuTable of Contentsst０２／０２／０１　１５：２５：５０　３１Ｓ５Ｂ６００　０１６０　

Carrying Cargo

Air Intake

AIR INTAKE

Do not spill any liquids over the air intake and also do not put any small foreign objects in it. This may damage the IMA battery and the power control unit.

The air intake for the IMA battery is located on top of the trunk panel. Do not block this air intake, it may cause the IMA battery and the power control unit to overheat, causing the IMA to shut down. It will start working again after it cools.

Before Driving

157

Main MenuTable of Contentsst０２／０２／０１　１５：２５：５８　３１Ｓ５Ｂ６００　０１６２　

Driving

This section gives you tips on starting the engine under various conditions, and how to operate the 5-speed manual and automatic transmissions. It also includes impor- tant information on parking your car, and the braking system.

Preparing to Drive Starting the Engine

........................ .......................

. 160
. 161

Starting in Cold Weather

at High Altitude

....................

. 161

5-speed Manual Transmission

.... ............................ ...........

Auto Idle Stop Auto Idle Stop Indicator Shift Up/Shift Down Indicators Engine Speed Limiter

................................... . 165
.............. . 165
Automatic Transmission(CVT) . 166
..

. 162
. 163
. 164

Continuously Variable Transmission(CVT) . 166
................. Shift Lever Position Indicator . 166
................ Shift Lever Positions . 167
. 169
Engine Speed Limiter .............. . 170
Shift Lock Release .................... . 171
Auto Idle Stop ............................ . 172
........... Auto Idle Stop Indicator ........................................... . 173
. 173
.............................. . 174
..................... . 174
............. ............... . 175
. 175
.......................

Brake Wear Indicators Brake System Design Anti-lock Brakes

Parking Tips

The Braking System

Parking

Important Safety

Reminders ABS Indicator

Driving in Bad Weather Towing a Trailer

......................... ........................ ............... ...........................

. 176
. 177
. 178
. 179

Driving 159

Main Menust０２／０２／０１　１５：２６：１２　３１Ｓ５Ｂ６００　０１６３　

4.

5.

6.

Check that any items you may be carrying with you inside are stored properly or fastened down securely.

Check the adjustment of the seat (see page

94

).

Check the adjustment of the inside and outside mirrors (see page

99

).

7.

Check the adjustment of the steering wheel (see page 82

).

8.

Make sure the doors are securely closed and locked.

9.

Fasten your seat belt. Check that your passengers have fastened their seat belts (see page ).

16

10.

Turn the ignition switch ON (II). Check the indicator lights in the instrument panel.

11.

Start the engine (see page

161

).

12.

Check the gauges and indicator lights in the instrument panel (see page

59

).

Preparing to Drive

You should do the following checks and adjustments every day before you drive your car.

1.

Make sure all windows, mirrors, and outside lights are clean and unobstructed. Remove frost, snow, or ice.

2.

Check that the hood and trunk are fully closed.

3.

Visually check the tires. If a tire looks low, use a gauge to check its pressure.

160

Driving

Main MenuTable of Contentsst０２／０２／０１　１５：２６：２５　３１Ｓ５Ｂ６００　０１６４　

1.

Apply the parking brake.

2.

3.

4.

In cold weather, turn off all electrical accessories to reduce the drain on the battery.

ManualTransmission: Push the clutch pedal down all the way. START (III) does not function unless the clutch pedal is depressed.

AutomaticTransmission(CVT): Make sure the shift lever is in Park. Press on the brake pedal.

Without touching the accelerator pedal, turn the ignition key to the START (III) position. If the engine does not start right away, do not hold the key in START (III) for more than 15 seconds at a time. Pause for at least 10 seconds before trying again.

5.

6.

If the engine does not start within 15 seconds, or starts but stalls right away, repeat step 4 with the accelerator pedal pressed half-way down. If the engine starts, release pressure on the accelerator pedal so the engine does not race.

If the engine still does not start, press the accelerator pedal all the way down and hold it there while starting in order to clear flooding. As before, keep the ignition key in the START (III) position for no more than 15 seconds. Return to step 5 if the engine does not start. If it starts, lift your foot off the accelerator pedal so the engine does not race.

Starting in Cold Weather at High Altitude (Above 8,000 feet/ 2,400 meters) An engine is harder to start in cold weather. The thinner air found at high altitude above 8,000 feet (2,400

Starting the Engine

meters) adds to the problem. Use the following procedure:

1.

Turn off all electrical accessories to reduce the drain on the battery.

2.

Push the accelerator pedal half- way to the floor and hold it there while starting the engine. Do not hold the ignition key in START (III) for more than 15 seconds. When the engine starts, release the accelerator pedal gradually as the engine speeds up and smooths out.

3.

If the engine fails to start in step 2, push the accelerator pedal to the floor and hold it there while you try to start the engine for no more than 15 seconds. If the engine does not start, return to step 2.

Driving

161

Main MenuTable of Contentsst０２／０２／０１　１５：２６：３２　３１Ｓ５Ｂ６００　０１６５　

5-speed Manual Transmission

Rapid slowing or speeding-up can cause loss of control on slippery surfaces. If you crash, you can be injured.

Use extra care when driving on slippery surfaces.

Come to a full stop before you shift into Reverse. You can damage the transmission by trying to shift into Reverse with the car moving. Push down the clutch pedal, and pause for a few seconds before shifting into Reverse, or shift into one of the forward gears for a moment. This stops the gears so they won’t ‘‘grind.’’

When slowing down, you can get extra braking from the engine by shifting to a lower gear. This extra braking can help you maintain a safe speed and prevent your brakes from overheating while going down a steep hill. Before downshifting, make sure the vehicle speed is low enough that you will not activate the engine speed limiter in the lower gear. Make sure the engine speed will not go into the tachometer’s red zone in the lower gear before downshifting.

The manual transmission is syn- chronized in all forward gears for smooth operation. It has a detent so you cannot shift directly from Fifth to Reverse. When shifting up or down, make sure you push the clutch pedal down all the way, shift to the next gear, and let the pedal up gradually. When you are not shifting, do not rest your foot on the clutch pedal. This can cause your clutch to wear out faster.

162

Driving

Main MenuTable of Contentsst０２／０２／０１　１５：２６：４５　３１Ｓ５Ｂ６００　０１６６　

Auto Idle Stop To maximize fuel economy, your Civic Hybrid has an Auto Idle Stop function. Under certain conditions, the engine will shut off when you come to a stop. Those conditions are:

The engine coolant is nearly up to normal operating temperature.

The vehicle’s speed is below 19
mph (30 km/h) and you are pressing on the brake pedal to come to a stop.

You depress the clutch pedal.

You are not pressing on the accelerator pedal.

The IMA battery is charged enough to operate the system.

The ECON mode is selected, and the outside temperature is above 41°F (5°C), or the fan speed

control dial is off (see page

111

).

There is adequate vacuum reserve for the power brakes.

When these conditions are met, the engine will shut off as you come to a stop. It will start again automatically when you depress the clutch pedal and move the shift lever to first gear. There is no need to start the engine with the ignition switch.

It is recommended that you move the shift lever to Neutral and remove your foot from the clutch pedal while you are stopped. Sitting with the clutch pedal depressed and the shift lever in gear will cause the engine to continue running, defeating the fuel economy benefits of the Auto Idle Stop function.

5-speed Manual Transmission

During Auto Idle Stop, the IMA charge and power brake vacuum reserve is monitored by the system. If either drops below a desired level, and the shift lever is in Neutral, the engine will restart so it can recharge the IMA battery or replenish the vacuum supply.

The Auto Idle Stop function may not activate when starting the engine or if the IMA battery temperature is too hot or too cold.

CONTINUED

Driving

163

Main MenuTable of Contentsst０２／０２／０１　１５：２６：５１　３１Ｓ５Ｂ６００　０１６７　

5-speed Manual Transmission

Auto Idle Stop Indicator

AUTO IDLE STOP INDICATOR

engine with the ignition switch when this light is blinking.

This indicator will blink, and you will hear a continuous beep, if you open the door when Auto Stop is active. The beep will stop when you close the door.

Always turn the ignition switch to LOCK (0) and remove the key if you are getting out of the vehicle.

This indicator comes on as a reminder that the engine has stopped because of the Auto Idle Stop function. When the indicator is off, it means that Auto Idle Stop is not active. When the indicator is on, but the engine is not running, it means the clutch pedal is depressed, but the transmission is not in gear. When the indicator is blinking, it means the clutch pedal is not depressed. You cannot restart the

164

Driving

Main MenuTable of Contentsst０２／０２／０１　１５：２７：００　３１Ｓ５Ｂ６００　０１６８　

Shift Up/Shift Down Indicators

SHIFT UP INDICATOR

(19 km/h), losing speed, and pressing on the accelerator pedal.

Road and traffic conditions may require you to shift at times other than those indicated.

SHIFT DOWN INDICATOR

Either the Shift Up or Shift Down indicator will light to show the best time to shift to a higher or lower gear. You can achieve the best fuel economy by accelerating and decelerating slowly, and shifting when prompted by the Shift Up indicator.

The Shift Down indicator prompts you to shift to a lower gear when you are climbing a hill faster than 12 mph

5-speed Manual Transmission

Engine Speed Limiter If you exceed the maximum speed for the gear you are in, the engine speed will enter into the tachometer’s red zone. If this occurs, you may feel the engine cut in and out. This is caused by a limiter in the engine’s computer controls. The engine will run normally when you reduce the RPM below the red zone.

Before downshifting, make sure the engine will not go into the tachometer’s red zone.

Driving

165

Main MenuTable of Contentsst０２／０２／０１　１５：２７：０８　３１Ｓ５Ｂ６００　０１６９　

Automatic Transmission (CVT)

Shift Lever Position Indicator

Continuously Variable Transmission (CVT) Honda’s Continuously Variable automatic transmission’s unique design provides a smooth, constant flow of power. It is electronically controlled for more precise operation and better fuel economy.

This indicator on the instrument panel shows which position the shift lever is in.

The ‘‘D’’ indicator comes on for a few seconds when you turn the ignition switch ON (II). If it flashes while driving (in any shift position), it indicates a possible problem in the transmission. Avoid rapid acceler- ation and have the transmission checked by an authorized Honda dealer as soon as possible.

The malfunction indicator lamp may come on along with the ‘‘D’’ indicator if there is a problem in the continuously variable transmission control system.

166

Driving

Main MenuTable of Contentsst０２／０２／０１　１５：２７：１７　３１Ｓ５Ｂ６００　０１７０　

Automatic Transmission (CVT)

To shift from:

Do this:

Press the brake pedal and press the release button.

Press the release button.

Move the lever.

P to R

R to P N to R S to L L to S S to D D to N D to S N to D R to N

Shift Lever Positions

SHIFT LEVER

RELEASE BUTTON The shift lever has six positions. It must be in Park or Neutral to start the engine. When you are stopped in D, S, L, N or R, press firmly on the brake pedal and keep your foot off the accelerator pedal.

−

This position mechani-

Park (P) cally locks the transmission. Use Park whenever you are turning off or starting the engine. To shift out of Park, you must press on the brake pedal and have your foot off the accelerator pedal. Press the release button on the front of the shift lever to move it.

CONTINUED

Driving

167

Main MenuTable of Contentsst０２／０２／０１　１５：２７：２４　３１Ｓ５Ｂ６００　０１７１　

Automatic Transmission (CVT)

−

Drive (D) Use this position for your normal driving. The transmis- sion automatically adjusts to keep the engine at the best speed for driving conditions. To help the engine warm up faster, the transmis- sion will select ratios that allow the engine to run at higher speeds when it is cold.

−

To shift to Reverse

Reverse (R) from Park, see the explanation under Park. To shift to Reverse from Neutral, come to a complete stop and then shift. Press the release button before shifting into Reverse from Neutral.

−

Use Neutral if you

Neutral (N) need to restart a stalled engine, or if it is necessary to stop briefly with the engine idling. Always shift to Park position if you need to leave the car for any reason. Press on the brake pedal when you are moving the shift lever from Neutral to another position.

If you have done all of the above and still cannot move the lever out of Park, see Shift Lock Release on page 170

You must also press the release button to shift into Park. To avoid transmission damage, come to a complete stop before shifting into Park. The shift lever must be in Park before you can remove the key from the ignition switch.

168

Driving

Main MenuTable of Contentsst０２／０２／０１　１５：２７：３１　３１Ｓ５Ｂ６００　０１７２　

Automatic Transmission (CVT)

−

Selecting Second

Second (S) shifts the transmission into a lower range of ratios for better accelera- tion and increased engine braking. Use Second when you are going down a steep hill, or in stop-and-go driving.

−

To shift to Low, press

Low (L) the release button on the front of the shift lever. Use Low to get more power when climbing, and for maximum engine braking when going down steep hills.

For faster acceleration when in D, S or L, the transmission will automatically ‘‘kick down’’ to a lower range of ratios by pushing the accelerator pedal to the floor.

Engine Speed Limiter The CVT shifts automatically to maintain proper engine speed in any shift position.

When the vehicle reaches the maximum speed in any shift position, you may feel the engine cut in and out. This is caused by a limiter (112
mph, 180 km/h) in the engine’s computer controls. The engine will run normally when you reduce the speed to below the maximum.

Driving

169

Main MenuTable of Contentsst０２／０２／０１　１５：２７：４３　３１Ｓ５Ｂ６００　０１７３　

Automatic Transmission (CVT)

Shift Lock Release This allows you to move the shift lever out of Park if the normal method of pushing on the brake pedal and pressing the release button does not work.

1.

Set the Parking brake.

2.

Remove the key from the ignition switch.

3.

Put a cloth on the edge of the Shift Lock Release slot cover next to the shift lever. Use a small flat-tipped screwdriver or small metal plate (neither are included in the tool kit) to remove the cover. Carefully pry on the edge of the cover.

170

Driving

RELEASE BUTTON

COVER

4.

Insert the key in the Shift Lock Release slot.

5.

Push down on the key while you press the release button on the shift lever and move the shift lever out of Park to Neutral.

SHIFT LOCK RELEASE SLOT

6.

Remove the key from the Shift Lock Release slot, then reinstall the cover. Make sure the notch on the cover is on the left side. Return the key to the ignition switch, depress the brake pedal, and restart the engine.

If you need to use the Shift Lock Release, it means your car is developing a problem. Have the car checked by your Honda dealer.

Main MenuTable of Contentsst０２／０２／０１　１５：２７：５６　３１Ｓ５Ｂ６００　０１７４　

Auto Idle Stop To maximize fuel economy, your Civic Hybrid has an Auto Idle Stop function. Under certain conditions, the engine will shut off when you come to a stop. Those conditions are:

The engine coolant is nearly up to normal operating temperature.

The shift lever is in D or N.

You are not pressing on the accelerator pedal.

The IMA battery is charged enough to operate the system.

The ECON mode is selected, and the outside temperature is above 41°F (5°C), or the fan speed control dial is off (see page

111

).

Automatic Transmission (CVT)

During Auto Idle Stop, the IMA charge and power brake vacuum reserve is monitored by the system. If the vacuum reserve drops below an optimal level, the engine will restart to replenish the vacuum supply. If the IMA charge drops below an optimal level and the shift lever is in Neutral or Park (P), the engine will restart to recharge the IMA battery.

The Auto Idle Stop function may not activate when starting the engine or if the IMA battery temperature is too hot or too cold.

There is adequate vacuum reserve for the power brakes.

When these conditions are met after the vehicle speed has exceeded 10
mph (16 km/h), the engine will shut off as you are braking to a stop and the vehicle speed goes below 5 mph (8 km/h).

The engine will start again when you release the brake pedal. It will also restart, even if you are still pressing the brake pedal, under these conditions:

You move the shift lever from D or N to R or L.

You press the accelerator pedal.

You are on an incline, and the vehicle begins rolling.

Driving

171

Main MenuTable of Contentsst０２／０２／０１　１５：２８：０３　３１Ｓ５Ｂ６００　０１７５　

Automatic Transmission (CVT)

If you open the driver’s door when Auto Stop is active, the indicator will blink and you will hear a continuous beep. The beep will stop when you close the door.

With the driver’s door open, you will hear a continuous beep even if the Auto Idle Stop function is deactivated and the engine restarts.

Always turn the ignition switch to LOCK (0) and remove the key if you are getting out of the car.

Auto Idle Stop Indicator

AUTO IDLE STOP INDICATOR

The indicator blinks as a reminder that the engine has stopped because of the Auto Idle Stop function. You cannot restart the engine with the ignition switch when this light is blinking.

172

Driving

Main MenuTable of Contentsst０２／０２／０１　１５：２８：１４　３１Ｓ５Ｂ６００　０１７６　

Always use the parking brake when you park your car. The indicator on the instrument panel shows that the parking brake is not fully released; it does not indicate that the parking brake is firmly set. Make sure the parking brake is set firmly or your car may roll if it is parked on an incline.

If your car has an automatic transmission, set the parking brake before you put the transmission in Park. This keeps the car from moving and putting pressure on the parking mechanism in the transmission making it easier to move the shift lever out of Park when you want to drive away.

−

If the car is facing uphill, turn the front wheels away from the curb. If you have a manual transmission, put it in first gear.

If the car is facing downhill, turn the front wheels toward the curb. If you have a manual transmission, put it in reverse gear.

Make sure the parking brake is fully released before driving away. Driving with the parking brake partially set can overheat or damage the rear brakes.

Parking

Parking Tips

Make sure the windows are closed.

Turn off the lights.

Place any packages, valuables, etc., in the trunk or take them with you.

Lock the doors with the key or the remote transmitter.

Never park over dry leaves, tall grass, or other flammable materials. The three way catalytic converter gets very hot, and could cause these materials to catch on fire.

Driving 173

Main MenuTable of Contentsst０２／０２／０１　１５：２８：２２　３１Ｓ５Ｂ６００　０１７７　

Constant application of the brakes when going down a long hill builds up heat and reduces their effective- ness. Use the engine to assist the brakes by downshifting to a lower gear and taking your foot off the accelerator pedal.

Check your brakes after driving through deep water. Apply the brakes moderately to see if they feel normal. If not, apply them gently and frequently until they do. Since a longer distance is needed to stop with wet brakes, be extra cautious and alert in your driving.

Brake Wear Indicators The front disc brakes on all models have audible brake wear indicators. When the brake pads need replacing, you will hear a distinctive metallic ‘‘screeching’’ sound when you apply the brakes. If you do not have the brake pads replaced, they will begin screeching all the time.

Your brakes may sometimes squeal or squeak when you apply them lightly. Do not confuse this with the brake wear indicators. They make a very audible ‘‘screeching.’’

The Braking System

The Civic Hybrid is equipped with front disc brakes. The brakes on the rear wheels are drum. A power assist helps reduce the effort needed on the brake pedal. The ABS (on cars equipped with ABS) helps you retain steering control when braking very hard.

Put your foot on the brake pedal only when you intend to brake. Resting your foot on the pedal keeps the brakes applied lightly, causing them to build up heat. Heat build-up can reduce how well your brakes work. It also keeps your brake lights on all the time, confusing drivers behind you.

174

Driving

Main MenuTable of Contentsst０２／０２／０１　１５：２８：３２　３１Ｓ５Ｂ６００　０１７８　

Brake System Design The hydraulic system that operates the brakes has two separate circuits. Each circuit works diagonally across the vehicle (the left-front brake is connected with the right-rear brake, etc.). If one circuit should develop a problem, you will still have braking at two wheels.

Front

Anti-lock Brakes (Optional) ABS helps to prevent the wheels from locking up and skidding during hard braking, allowing you to retain steering control.

When the front tires skid, you lose steering control; the car continues straight ahead even though you turn the steering wheel. The ABS helps to prevent lock-up and helps you retain steering control by pumping the brakes rapidly; much faster than a person can do it.

The ABS also balances the front-to rear braking distribution according to vehicle loading.

The Braking System

You should never pump the brake pedal; this defeats the purpose of the ABS. Let the ABS work for you by always keeping firm, steady pressure on the brake pedal as you steer away from the hazard. This is sometimes referred to as ‘‘stompandsteer.’’

You will feel a pulsation in the brake pedal when the ABS activates, and you may hear some noise. This is normal; it is the ABS rapidly pumping the brakes.

CONTINUED

Driving

175

Main MenuTable of Contentsst０２／０２／０１　１５：２８：４０　３１Ｓ５Ｂ６００　０１７９　

The Braking System

Activation varies with the amount of traction your tires have. On dry pavement, you will need to press on the brake pedal very hard before you activate the ABS. However, you may feel the ABS activate immediately if you are trying to stop on snow or ice.

ImportantSafetyReminders ABS does not reduce the time or distance it takes to stop the car; only helps with steering control during braking. You should always maintain a safe following distance from other vehicles.

it

A vehicle with ABS may require a longer distance to stop on loose or uneven surfaces, such as gravel or snow, than a vehicle without anti- lock. Slow down and allow a greater distance between vehicles under those conditions.

ABS will not prevent a skid that results from changing direction abruptly, such as trying to take a corner too fast or making a sudden lane change. Always drive at a safe, prudent speed for the road and weather conditions.

ABS cannot prevent a loss of stability. Always steer moderately when you are braking hard. Severe or sharp steering wheel movement can still cause your car to veer into oncoming traffic or off the road.

176

Driving

Main MenuTable of Contentsst０２／０２／０１　１５：２８：４７　３１Ｓ５Ｂ６００　０１８０