Seat Belt Reminder Indicator
● Comes on and the beeper sounds if you are not wearing a seat belt when you turn the ignition switch to ON (w *1.
● If the front passenger is not wearing
a seat belt, the indicator comes on about six seconds later.
● Blinks while driving if either you or
● The beeper stops and the indicator goes off when you and the front passenger fasten their seat belts.
● Stays on after you or the front
passenger has fastened the seat belt - A detection error may have occurred in the sensor. Have the vehicle checked by a dealer.
the front passenger has not fastened a seat belt. The beeper sounds and the indicator blinks at regular intervals.
2 Seat Belt Reminder P. 33
*1:
Models
with the smart
entry system have an ENGINE START/STOP button instead of an ignition switch.
* Not available on all models
Index
Home
Continued
71
2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 72 ページ 2012年10月3日 水曜日 午後4時21分
uuIndicatorsu
QRG
TOC
Indicator
Name
On/Blinking
Explanation
Message *
Low Fuel Indicator
● Comes on when the fuel reserve is
● Comes on - Refuel your vehicle as soon
running low (approximately 2.6 U.S. gal./9.7 Liter left).
as possible.
● Blinks - Have the vehicle checked by a
● Blinks if there is a problem with the
dealer.
fuel gauge.
ABS (Anti-lock Brake System) Indicator
● Comes on for a few seconds when you turn the ignition switch to ON (w *1, then goes off.
● If it comes on at any other time, there is a problem with the ABS.
Supplemental Restraint System Indicator
● Comes on for a few seconds when you turn the ignition switch to ON (w *1, then goes off.
● Comes on if a problem with any of
the following is detected: - Supplemental restraint system - Side airbag system - Side curtain airbag system - Seat belt tensioner
● Stays on constantly - Have the vehicle checked by a dealer. With this indicator on, your vehicle still has normal braking ability but no anti-lock function.
2 ABS (Anti-lock Brake System)
P. 475
● Stays on constantly or does not come on at all - Have the vehicle checked by a dealer.
Index
Home
72
*1:
Models
with the smart
entry system have an ENGINE START/STOP button instead of an ignition switch.
* Not available on all models
2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 73 ページ 2012年10月3日 水曜日 午後4時21分
uuIndicatorsu
Indicator
Name
On/Blinking
Explanation
Message *
VSA® (Vehicle Stability Assist) System Indicator
● Comes on for a few seconds when you turn the ignition switch to ON (w *1, then goes off.
● Blinks when VSA® is active. ● Comes on if there is a problem with
the VSA® system or hill start assist system.
● Stays on constantly - Have the vehicle
checked by a dealer.
2 VSA® (Vehicle Stability Assist)
System P. 465
VSA® (Vehicle Stability Assist) OFF Indicator
● Comes on for a few seconds when you turn the ignition switch to ON (w *1, then goes off.
● Comes on when you deactivate
VSA®.
2 VSA® On and Off P. 466
—
QRG
TOC
*1:
Models
with the smart
entry system have an ENGINE START/STOP button instead of an ignition switch.
* Not available on all models
Index
Home
Continued
73
2013 Accord SedanQRG
TOC
13 ACCORD 4D US-31T2A6000.book 74 ページ 2012年10月3日 水曜日 午後4時21分
uuIndicatorsu
Indicator
Name
On/Blinking
Explanation
Message *
● Goes off when all doors and the trunk
are closed.
● Comes on for a few seconds if you turn the ignition switch to ON (w *1, then goes off.
● Comes on if any door or the trunk is
not completely closed.
● The beeper sounds and the indicator comes on if any door or the trunk is opened while driving.
Door and Trunk Open Indicator
Models with information display
Models with multi- information display
EPS (Electric Power Steering) System Indicator
● Comes on when you turn the
ignition switch to ON (w *1, and goes off when the engine starts.
● Comes on if there is a problem with
the EPS (Electric Power Steering) System.
● Stays on constantly or does not come on at all - Have the vehicle checked by a dealer.
2 If the EPS System Indicator Comes
On P. 562
Index
Home
74
*1:
Models
with the smart
entry system have an ENGINE START/STOP button instead of an ignition switch.
* Not available on all models
2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 75 ページ 2012年10月3日 水曜日 午後4時21分
uuIndicatorsu
Indicator
Name
On/Blinking
Explanation
Message *
Low Tire Pressure/ TPMS Indicator
● Comes on for a few seconds when you
turn the ignition switch to ON (w *1.
● May come on briefly if the ignition switch is turned to ON (w *1 and the vehicle is not moved within 45 seconds, to indicate the calibration process is not yet complete.
● Comes on and stays on when:
● Comes on while driving - Stop in a safe place, check tire pressures, and inflate the tire(s) if necessary.
● Stays on after the tires are inflated
to the recommended pressures - The
system needs to be calibrated.
2 TPMS Calibration P. 469
- One or more tires’ pressures are
determined to be significantly low. - The system has not been calibrated.
● Blinks for about one minute, and then stays on if there is a problem with the TPMS, or when a compact spare tire is temporarily installed.
● Blinks and remains on - Have the
vehicle checked by a dealer. If the vehicle is fitted with a compact spare, get your regular tire repaired or replaced and put back on your vehicle as soon as you can.
QRG
TOC
*1:
Models
with the smart
entry system have an ENGINE START/STOP button instead of an ignition switch.
* Not available on all models
Index
Home
Continued
75
2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 76 ページ 2012年10月3日 水曜日 午後4時21分
uuIndicatorsu
QRG
TOC
Index
Home
76
Indicator
Name
On/Blinking
Explanation
Message *
● Comes on for a few seconds when you set
● While the indicator is on, press the
the power mode to ON, then goes off. ● Comes on along with a beep when a
problem is detected. A system message on the multi-information display appears at the same time.
(information) button to see the
message again.
● Refer to the Indicators information in this chapter when a system message appears on the multi-information display. Take the appropriate action for the message.
● The multi-information display does not return
to the normal screen unless the warning is canceled, or the button is pressed.
● The turn signal indicators blink when you
● Does not blink or blinks rapidly - A
operate the turn signal lever.
● If you press the hazard warning button,
both indicators and all turn signals blink at the same time.
turn signal light bulb has blown. Change the bulb immediately.
2 Replacing Light Bulbs P. 518,
P. 520
● Comes on when the high beam headlights
are on.
—
System Message Indicator *
Turn Signal and Hazard Warning Indicators
High Beam Indicator
Lights On Indicator
● Comes on whenever the light switch is on,
or in AUTO when the exterior lights are on.
● If you remove the key from the ignition switch*1 while the exterior lights are on, a chime sounds when the driver's door is opened.
—
—
—
—
*1:
Models
with the smart
entry system have an ENGINE START/STOP button instead of an ignition switch.
* Not available on all models
2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 77 ページ 2012年10月3日 水曜日 午後4時21分
uuIndicatorsu
Indicator
Name
On/Blinking
Explanation
Message *
Fog Light Indicator *
● Comes on when the fog lights are
on.
—
● Comes on briefly when you turn the
● Blinks - You cannot start the engine.
ignition switch to ON (w *1, then goes off.
● Comes on if the immobilizer system
Immobilizer System Indicator
cannot recognize the key information.
Turn the ignition switch to LOCK (0 *1, pull the key out, and then insert the key and turn it to ON (w *1 again.
● Repeatedly blinks - The system may
be malfunctioning. Have the vehicle checked by a dealer.
● Do not attempt to alter this system or
add other devices to it. Electrical problems can occur.
Security System Alarm Indicator
Indicator
● Blinks when the security system
alarm has been set.
2 Security System Alarm P. 124
—
—
—
QRG
TOC
*1:
Models
with the smart
entry system have an ENGINE START/STOP button instead of an ignition switch.
* Not available on all models
Index
Home
Continued
77
2013 Accord SedanQRG
TOC
13 ACCORD 4D US-31T2A6000.book 78 ページ 2012年10月3日 水曜日 午後4時21分
uuIndicatorsu
Indicator
Name
On/Blinking
Explanation
Message*1
● Comes on for a few seconds when you change the power mode to ON, then goes off.
● Comes on when you have
customized FCW to turn off.
● Comes on if there is a problem
with the FCW system.
● Stays on constantly without FCW off - Have the vehicle
checked by a dealer.
Models with information display ● Blinks when the system detects a likely collision with a vehicle in front of you. The beeper sounds.
All models ● Comes on when the FCW
system shuts itself off.
Forward Collision Warning (FCW) Indicator *
● Blinks while driving - Take appropriate action to prevent
a collision (apply the brakes, change lanes, etc.).
Models with information display ● Stays on - The temperature inside the FCW system is too high.
The system activates when the temperature inside the system cools down.
2 Automatic shutoff P. 460
—
—
—
● Stays on - The radar sensor or the area around the camera is blocked by dirt, mud, etc. Stop your vehicle in a safe place, and wipe it off with a soft cloth.
● Have your vehicle checked by a dealer if:
Models with multi-information display The indicator and message stay on after you cleaned the radar sensor cover. Models with information display The indicator and message come back on after you cleaned the area around the camera.
2 Automatic shutoff P. 460
entry system have an ENGINE START/STOP button instead of an ignition switch.
Not
available
on
all
models
2 Automatic shutoff P. 460
—
—
Index
Home
78
*1:
Models
with the smart
2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 79 ページ 2012年10月3日 水曜日 午後4時21分
uuIndicatorsu
Indicator
Name
On/Blinking
Explanation
Message*1
● Comes on for a few seconds when you change the power mode to ON, then goes off.
● Comes on if there is a problem with
the LDW system.
● Stays on constantly - Have the vehicle
checked by a dealer.
Models with information display ● Blinks when your vehicle is too close to the lane lines. The beeper sounds.
● Blinks while driving - Take
appropriate action to keep your vehicle within the lane lines.
—
—
● Comes on when the LDW system
● Stays on - The temperature inside the
QRG
TOC
shuts itself off.
Lane Departure Warning (LDW) Indicator *
LDW camera is too high. The system activates when the temperature inside the camera cools down.
2 LDW Camera P. 463
● Stays on - The area around the camera is blocked by dirt, mud, etc. Stop your vehicle in a safe place, and wipe it off with a soft cloth.
● Have your vehicle checked by a dealer if
the indicator and message come back on after you cleaned the area around the camera.
2 LDW Camera P. 463
*1:On the left: Models with information display On the right: Models with multi-information display
* Not available on all models
Index
Home
Continued
79
2013 Accord SedanQRG
TOC
13 ACCORD 4D US-31T2A6000.book 80 ページ 2012年10月3日 水曜日 午後4時21分
uuIndicatorsu
Indicator
Name
On/Blinking
Explanation
Message *
ACC (Adaptive Cruise Control) Indicator (Amber) *
ECON Mode Indicator
● Comes on for a few seconds when you change the power mode to ON, then goes off.
● Comes on if there is a problem with
ACC.
● Comes on when you turn the
ignition switch to ON (w *1, and goes off when the engine starts.
● Comes on when you press the
ECON button.
● Comes on while driving - Have the
vehicle checked by a dealer.
2 ECON Button P. 446
CRUISE MAIN Indicator *
● Comes on when you press the
CRUISE button.
2 Cruise Control* P. 447
CRUISE CONTROL Indicator *
Washer Level Indicator *
● Comes on if you have set a speed for
cruise control.
2 Cruise Control* P. 447
● Comes on when the washer fluid
● Refill the washer fluid.
gets low.
2 Refilling Window Washer Fluid
P. 512
2 Maintenance MinderTM P. 489
Maintenance Minder Indicator *
● Comes on when the scheduled
maintenance is due soon.
—
—
—
—
Index
Home
80
*1:
Models
with the smart
entry system have an ENGINE START/STOP button instead of an ignition switch.
* Not available on all models
2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 81 ページ 2012年10月3日 水曜日 午後4時21分
uuIndicatorsu
Indicator
Name
On/Blinking
Explanation
Message *
● Comes on for a few seconds when you change the power mode to ON. ● Comes on as soon as a problem is detected in the smart entry system or push button starting system.
Smart Entry System Indicator *
● Have your vehicle checked by a dealer.
U.S.
Canada
Starter System Indicator *
● Comes on for a few seconds when
you set the power mode to ON, then goes off.
● Comes on if the starting system has
a problem.
● As a temporary measure, press and hold the ENGINE START/STOP button for 15 seconds while pressing the brake pedal and manually start the engine. Have the vehicle checked by a dealer.
Light Control Indicator *
● Comes on if there is a problem with
the automatic lighting control system or low beam headlights *.
● Comes on while driving - Turn the lights on manually and have the vehicle checked by a dealer.
*1:
Models
with the smart
entry system have an ENGINE START/STOP button instead of an ignition switch.
* Not available on all models
QRG
TOC
—
—
Index
Home
81
2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 82 ページ 2012年10月3日 水曜日 午後4時21分
uuIndicatorsuInformation Display Warning and Information Messages*
QRG
Information Display Warning and Information Messages* The following messages appear only on the information display.
Message
Condition
Explanation
● Appears when the fuel fill cap is loose or is not
installed.
2 Check/Tighten Fuel Cap Message P. 561
TOC
● Appears when there is a problem with the sensor on
● Stays on constantly - Have the vehicle checked by a
the battery.
dealer.
Index
Home
82
* Not available on all models
2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 83 ページ 2012年10月3日 水曜日 午後4時21分
uuIndicatorsuInformation Display Warning and Information Messages*
Models with smart entry system
Message
Condition
Explanation
● Appears if you push the ENGINE START/STOP button
● Push the ENGINE START/STOP button twice after
to turn the engine off without the shift lever in (P.
moving the shift lever to (P.
QRG
TOC
● Appears when the power mode is in ACCESSORY.
—
● Appears when the steering wheel is locked.
● Move the steering wheel left and right while pressing
the ENGINE START/STOP button at the same time.
● Appears when you close the door with the power mode in ON without the smart entry remote inside the vehicle.
● Disappears when you bring the smart entry remote back
inside the vehicle and close the door.
● Appears when the smart entry remote’s battery
becomes weak.
● Replace the battery as soon as possible.
2 Replacing the Button Battery P. 535
* Not available on all models
Index
Home
83
2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 84 ページ 2012年10月3日 水曜日 午後4時21分
uuIndicatorsuMulti-Information Display Warning and Information Messages*
Multi-Information Display Warning and Information Messages* The following messages appear only on the multi-information display. Press the with the system message indicator on.
(information) button to see the message again
Message
Condition
Explanation
● Appears when the fuel fill cap is loose or is not
installed.
2 Check/Tighten Fuel Cap Message P. 561
● Appears when the scheduled maintenance is due
soon. uConsequently, Maintenance Due Now and
Maintenance Past Due follow.
● Appears when the engine coolant temperature gets
abnormally high.
2 Maintenance Minder Messages on the Multi-
Information Display P. 494
2 Overheating P. 558
● Appears if there is a problem with the automatic
● Comes on while driving - Manually turn the lights on,
lighting control system.
and have your vehicle checked by a dealer.
● Appears if there is a problem with the low beam
● Comes on while driving - Turn the lights on manually
headlights.
and have the vehicle checked by a dealer.
* Not available on all models
QRG
TOC
Index
Home
84
2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 85 ページ 2012年10月3日 水曜日 午後4時21分
uuIndicatorsuMulti-Information Display Warning and Information Messages*
Message
Condition
Explanation
● Appears while you are customizing the settings and
the shift lever is moved out of (P.
2 Customized Features P. 97
● Appears after you unlock and open the driver’s door.
2 Starting the Engine P. 429
● Appears three seconds after the To Start Engine
message appears.
2 Starting the Engine P. 429
QRG
TOC
● Appears when the steering wheel is locked.
● Move the steering wheel left and right after pressing
the ENGINE START/STOP button.
● Appears if you push the ENGINE START/STOP
● Push the ENGINE START/STOP button twice after
button to turn the engine off without the shift lever in (P.
moving the shift lever to (P.
* Not available on all models
Index
Home
Continued
85
2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 86 ページ 2012年10月3日 水曜日 午後4時21分
uuIndicatorsuMulti-Information Display Warning and Information Messages*
QRG
TOC
Message
Condition
● Appears when the power mode is in ACCESSORY.
Explanation
—
Index
Home
86
● Appears after the driver’s door is opened when the
power mode is in ACCESSORY.
● Press the ENGINE START/STOP button twice with your foot off the brake pedal to change the power mode to VEHICLE OFF (LOCK).
● Appears when you close the door with the power mode in ON without the smart entry remote inside the vehicle.
● Disappears when you bring the smart entry remote
back inside the vehicle and close the door.
2 Smart Entry Remote Reminder P. 134
● Appears when the smart entry remote battery
becomes weak.
● Replace the battery as soon as possible.
2 Replacing the Button Battery P. 535
● Appears if the smart entry remote battery is too
weak to start the engine or the key is not with you to start the engine. A beeper sounds six times.
2 If the Smart Entry Remote Battery is Weak P. 552
* Not available on all models
2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 87 ページ 2012年10月3日 水曜日 午後4時21分
uuIndicatorsuMulti-Information Display Warning and Information Messages*
Message
Condition
Explanation
● Appears when there is a problem with the sensor on
● Have your vehicle checked by a dealer.
the battery.
● Appears when the battery is not charging.
2 Checking the Battery P. 534
● Appears along with the battery charging system indicator - Turn off the climate control system and rear defogger to reduce electricity consumption.
2 If the Charging System Indicator Comes On P. 560
● Appears when the starting system has a problem.
● As a temporary measure, press and hold the ENGINE
START/STOP button for 15 seconds while pressing the brake pedal and manually start the engine. Have the vehicle checked by a dealer.
● Appears for about three seconds when ACC has
● You can resume the set speed after the condition that
been automatically canceled.
caused ACC to cancel improves. Press the RES/+ button.
2 ACC (Adaptive Cruise Control)* P. 450
● Flashes when the system senses a likely collision with
● Take appropriate action to prevent a collision (apply the
a vehicle in front of you.
brakes, change lanes, etc.).
2 Forward Collision Warning (FCW)* P. 458
● Appears when your vehicle is too close to the traffic
● Take appropriate action to keep your vehicle within the
lane lines. The beeper sounds.
lane lines.
QRG
TOC
* Not available on all models
2 Lane Departure Warning (LDW)* P. 462
Index
Home
Continued
87
2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 88 ページ 2012年10月3日 水曜日 午後4時21分
uuIndicatorsuMulti-Information Display Warning and Information Messages*
QRG
TOC
Message
Condition
Explanation
● Appears when you press the MAIN button.
2 ACC (Adaptive Cruise Control)* P. 450
Index
Home
88
* Not available on all models
2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 89 ページ 2012年10月3日 水曜日 午後4時21分
Gauges and Displays
Gauges Gauges include the speedometer, tachometer, fuel gauge, and related indicators. They are displayed when the ignition switch is in ON (w *1.
■ Speedometer Displays your driving speed in mph (U.S.) or km/h (Canada).
■ Tachometer Shows the number of engine revolutions per minute.
■ Fuel Gauge Displays the amount of fuel left in the fuel tank.
■ Temperature Gauge Displays the temperature of the engine coolant.
*1:
Models
with the smart
entry system have an ENGINE START/STOP button instead of an ignition switch.
1Fuel Gauge
NOTICE You should refuel when the reading approaches Running out of fuel can cause the engine to misfire, damaging the catalytic converter.
The actual amount of remaining fuel may differ from the fuel gauge reading.
1Temperature Gauge
NOTICE Driving with the temperature gauge pointer in the upper zone can cause serious engine damage. Pull safely to the side of the road and allow engine temperature to return to normal.
2 Overheating P. 558
QRG
TOC
Index
Home
89
2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 90 ページ 2012年10月3日 水曜日 午後4時21分
uuGauges and DisplaysuInformation Display*
QRG
Information Display* The information display shows the odometer, trip meter, engine oil life and maintenance service item codes, and other gauges.
■ Switching the Display Press the
(Select/Reset) knob to change the display.
TOC
1Switching the Display
Each time you press the display changes as follows:
knob, the information
Instant Fuel Economy, Odometer, Trip Meter A, Outside Temperature
Instant Fuel Economy, Range, Trip Meter A, Outside Temperature
Select/Reset Knob
Instant Fuel Economy, Average Fuel Economy A, Trip Meter A, Outside Temperature
Instant Fuel Economy, Average Fuel Economy B, Trip Meter B, Outside Temperature
Engine Oil Life
Some of the items on the information display also appear on the audio/information screen. They also change along with the information display changes while the fuel consumption is shown.
* Not available on all models
Index
Home
90
2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 91 ページ 2012年10月3日 水曜日 午後4時21分
uuGauges and DisplaysuInformation Display*
■ Odometer Shows the total number of miles (U.S.) or kilometers (Canada) that your vehicle has accumulated.
■ Trip Meter Shows the total number of miles (U.S.) or kilometers (Canada) driven since the last reset. Meters A and B can be used to measure two separate trips.
1Trip Meter
Switch between trip meter A and trip meter B by pressing the
knob.
■ Resetting a trip meter To reset a trip meter, display it, then press and hold the reset to 0.0.
knob. The trip meter is
■ Average Fuel Economy Shows the estimated average fuel economy of each trip meter in mpg (U.S.) or l/100 km (Canada). The display is updated at set intervals. When a trip meter is reset, the average fuel economy is also reset.
1Average Fuel Economy
You can change when to reset the average fuel economy.
2 Customized Features P. 299
QRG
TOC
■ Instant Fuel Economy Shows the instant fuel economy as a bar graph in mpg (U.S.) or l/100 km (Canada).
■ Engine Oil Life Shows the remaining oil life and Maintenance MinderTM.
2 Maintenance MinderTM P. 489
* Not available on all models
Continued
Index
Home
91
2013 Accord SedanQRG
TOC
13 ACCORD 4D US-31T2A6000.book 92 ページ 2012年10月3日 水曜日 午後4時21分
uuGauges and DisplaysuInformation Display*
■ Outside Temperature* Shows the outside temperature in Fahrenheit (U.S.) or Celsius (Canada).
■ Adjusting the outside temperature indicator Adjust the temperature reading up to ± 5°F or ± 3°C if the temperature reading seems incorrect. 1. Turn the ignition switch to ON (w *1.
2. Press and hold the
(Select/Reset) knob for 10 seconds or more while the
outside temperature is shown on the information display. uThe information display goes into temperature adjustment mode. The display
starts showing from -5°F to +5°F (U.S.) or -3°C to +3°C (Canada).
3. Release the
knob when the right adjustment amount is shown.
uThe adjustment is complete.
■ Range Shows the estimated distance you can travel on the remaining fuel. This distance is estimated from the fuel economy of your trips in the past.
1Outside Temperature*
The temperature sensor is in the front bumper. Road heat and exhaust from another vehicle can affect the temperature reading when your vehicle speed is less than 19 mph (30 km/h).
It may take several minutes for the display to be updated after the temperature reading has stabilized.
1Adjusting the outside temperature indicator
Adjust the temperature reading up to ± 5°F or ± 3°C.
Index
Home
92
*1:
Models
with the smart
entry system have an ENGINE START/STOP button instead of an ignition switch.
* Not available on all models
2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 93 ページ 2012年10月3日 水曜日 午後4時21分
Multi-Information Display* The multi-information display shows the odometer, trip meter, outside temperature indicator, and other gauges.
It also displays important messages such as warnings and other helpful information.
■ Switching the Display
Press the display.
(information) button or the SEL/RESET button to change the
uuGauges and DisplaysuMulti-Information Display*
QRG
TOC
Average Fuel Economy/ Instant Fuel Economy
Range
Elapsed Time
Average Speed
SEL/RESET Button
Button
* Not available on all models
Black Screen
Vehicle Settings
Engine Oil Life
Index
Home
Continued
93
2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 94 ページ 2012年10月3日 水曜日 午後4時21分
uuGauges and DisplaysuMulti-Information Display*
Odometer
Trip A
Trip B
QRG
TOC
SEL/RESET Button
Index
Home
94
* Not available on all models
2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 95 ページ 2012年10月3日 水曜日 午後4時21分
uuGauges and DisplaysuMulti-Information Display*
■ Odometer Shows the total number of miles (U.S.) or kilometers (Canada) that your vehicle has accumulated.
■ Trip Meter Shows the total number of miles (U.S.) or kilometers (Canada) driven since the last reset. Meters A and B can be used to measure two separate trips.
1Trip Meter
Switch between trip meter A and trip meter B by pressing the SEL/RESET button.
■ Resetting a trip meter To reset a trip meter, display it, then press and hold the SEL/RESET button. The trip meter is reset to 0.0.
■ Average Fuel Economy Shows the estimated average fuel economy of each trip meter in mpg (U.S.) or l/100 km (Canada). The display is updated at set intervals. When a trip meter is reset, the average fuel economy is also reset.
1Average Fuel Economy
You can change when to reset the average fuel economy.
2 Customized Features P. 97
P. 299
QRG
TOC
■ Range Shows the estimated distance you can travel on the remaining fuel. This distance is estimated from the fuel economy of your trips in the past.
■ Elapsed Time Shows the time elapsed since the last time Trip A or Trip B was reset.
* Not available on all models
Continued
1Elapsed Time
You can change when to reset the elapsed time.
2 Customized Features P. 97
P. 299
Index
Home
95
2013 Accord SedanQRG
TOC
13 ACCORD 4D US-31T2A6000.book 96 ページ 2012年10月3日 水曜日 午後4時21分
uuGauges and DisplaysuMulti-Information Display*
■ Average Speed Shows the average speed in mph (U.S.) or km/h (Canada) since the last time Trip A or Trip B was reset.
1Average Speed
You can change when to reset the average speed.
2 Customized Features P. 97
P. 299
■ Instant Fuel Economy Shows the instant fuel economy as a bar graph in mpg (U.S.) or l/100 km (Canada).
■ Engine Oil Life Shows the remaining oil life and Maintenance MinderTM.
2 Maintenance MinderTM P. 489
■ Outside Temperature Shows the outside temperature in Fahrenheit (U.S.) or Celsius (Canada).
■ Adjusting the outside temperature display Adjust the temperature reading up to ±5°F or ±3°C if the temperature reading seems incorrect.
1Outside Temperature
The temperature sensor is in the front bumper. Road heat and exhaust from another vehicle can affect the temperature reading when your vehicle speed is less than 19 mph (30 km/h).
It may take several minutes for the display to be updated after the temperature reading has stabilized.
Use the multi-information display's customized features to correct the temperature.
2 Customized Features P. 97
P. 299
Index
Home
96
2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 97 ページ 2012年10月3日 水曜日 午後4時21分
■ Customized Features Use the multi-information display to customize certain features.
■ How to customize Select the Vehicle Settings screen by pressing the mode is in ON, and the vehicle is at a complete stop.
Press the SEL/RESET button.
button while the power
uuGauges and DisplaysuMulti-Information Display*
1Customized Features
To customize other features, press the button.
2 List of customizable options P. 100
2 Example of customization settings P. 103
Customization is possible when you see the driver’s ID (Driver 1 or Driver 2) on the screen. The driver’s ID indicates which remote transmitter you have used to unlock the driver’s door. The customized settings are recalled every time you unlock the driver’s door with that remote.
Multi-Information Display: Goes to Vehicle Settings.
When you customize settings: Shift to (P
Button:
Changes the customize menus and items.
SEL/RESET button: Enters the selected item.
QRG
TOC
* Not available on all models
Continued
Index
Home
97
2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 98 ページ 2012年10月3日 水曜日 午後4時21分
uuGauges and DisplaysuMulti-Information Display*
QRG
TOC
■ Customization flow button. Press the
Vehicle Settings
SEL/RESET
TPMS Calibration
Driver Assist System Setup
SEL/RESET
Meter Setup
SEL/RESET
Forward Collision Warning Distance ACC Pre-Running Car Detect Beep
ACC Display Speed Unit
Language Selection
Adjust Outside Temp. Display
“Trip A” Reset Timing “Trip B” Reset Timing
Fuel Efficiency Backlight
Keyless Start Guidance Screens
SEL/RESET
Position Setup
SEL/RESET
Memory Position Link
Keyless Access Setup
SEL/RESET
Door Unlock Mode
Keyless Access Light Flash
Keyless Access Beep
* Not available on all models
Index
Home
98
2013 Accord Sedan13 ACCORD 4D US-31T2A6000.book 99 ページ 2012年10月3日 水曜日 午後4時21分
uuGauges and DisplaysuMulti-Information Display*
Interior Light Dimming Time
Headlight Auto Off Timer
Auto Light Sensitivity
Auto Door Lock