You may also be interested in...
Download PDF Manual

Changing a Flat Tire ......... 115
Hazard Warning System ... 30


(cont'd)


Air Conditioner


Care ............................. 107
Operation ...................... 44
Air Filter ............................ 96
Air Pressure, Tires ............... 104
Aluminum Alloy Wheels ....... 110
Antenna ............................ 51
Antifreeze


......... See "Radiator Coolant"


Anti-theft Steering Column Lock


System ......................... 61
Appearance Care ................ 109
Ashtrays ........................... 38
Audio System ..................... 51
Automatic Seat Belt ............ 10
Automatic Transmission


Driving Technique ........... 69
Fluid ............................. 89
Operation ...................... 68
Shift Lever Position


Indicator .................... 21


Battery


Charging System Warning


Light ......................... 23
Jump Starting ................118
Maintenance .................. 99
Specification .................. 125


Beeper System


Fasten Seat Belt Beeper .... 15
Key Reminder ................. 61
Light Reminder Chime ...... 29
Belts, Seat ...... See "Seat Belts" Beverage Holder ................. 37
BodyRepair........................ 112
Brake Warning Light ............ 22
Brakes


Brake Failure Warning


Light ......................... 22
BrakeFluid ..................... 94
Brake System Design....... 93
BrakeWear .................... 93
Brake Wear Indicators ...... 93
Parking Brake ................. 34
Parking Brake Warning


Light ......................... 22


Break-in Period ...................


Index (cont'd)


..... 121
If Your Car Gets Stuck Jump Starting ................ 118
Shoulder Belt Buckle ........ 122
Towing ......................... 120
Warning and Indicator


Lights


.......................


21
............... 129


Emission Controls Engine


Gasoline Gas Station


................. See "Fuel"


Information ......... Back cover ............................. 20
37


Gauges Glove Box ..........................


Coolant Coolant Temperature


.........................


90


Gauge ....................... 20
Exhaust Controls ............ 130
Identification Number ...... 126
Oil and Filter ................... 85
Oil Pressure Warning


Light .........................


22
.................. 125


Specification


Engine Exhaust Gas


Warning


........................ Evaporative Emission Control


64


System


Exhaust Gas Recirculation ExteriorCare


......................... 129
.... 130
...................... 109


Hazard Warning System ....... Headlights


30


Flasher .......................... 29
High Beam Indicator 21
High Beam/Low Beam


........


Switch ...................... 29
Reminder Chime ............. 29
Switch .......................... 29


Headlight High Beam Indicator Light ............................. Head Restraints .................. Heating High Beam


21
............................. 45


21
Indicator Light Switch .......................... 29
Hood Latch ........................ 34


................


Filters


Air ................................ 96
Engine Oil ...................... 86
Fuel .............................. 96
Fluid ......................... See "O i l" Foreign Countries,


Operation in


...................


58


Front Seat


Adjustment ....................


Fuel


59
Filler Door and Cap .......... Filter ............................. 96
Gasohol ......................... 57
Gasoline ........................ 57
Gauge ........................... 20
57
Requirement Reserve Warning Light 21


.................. .....


Fuse


Checking and Replacing ...100
Specification .................. 125


Identification Numbers Ignition


......... 126


Keys ............................. Switch .......................... 61
Ignition Switch Light ............ 30
Indicator Lights ................... 21
Inflation Pressures, Tire ........ 104
Instrument Panel ................. 19
Instrument Panel Brightness


Control .......................... ......................


30
31
................ 109


Interior Light Interior Trim Care


Jack ................................. 115
Jump Starting .................... 118


Keys


Door Locks .................... Glove Box ...................... 37
Ignition .......................... 61
Key Reminder Beeper ....... 61
Keys ............................. Trunk Lock .....................


Lap/Shoulder


Lights


Belts


.......... See "Seat Belts"


Bulb Replacement ........... 102
Fuse Replacement ........... 100
Light Reminder Chime ...... 29
Operation ...................... 29
Warning and Indicator


Lights


........................ 21


Locks


Anti-theft Steering Column


Lock


......................... 61
Doors ............................ Fuel Filler Door ................ 59
Glove Box ...................... 37
Power Door Locks ........... Trunk ............................ Lumbar Support ..................


Maintenance


Record .......................... 81
Schedule ....................... 78


Manual Transmission


Maximum Allowable


Speeds ....................... 66
Oil ................................ 88
Recommended Shift


Speeds ....................... 66
Shifting ......................... 65
Meters, Gauges ... See "Gauges " Mirrors


Power Mirrors ................. 28
Rearview Mirrors ............. 28


Numbers, Identification ........ 126


Octane Rating,


Gasoline ............. See "F u e l" Odometer .......................... 20
Oil


Clutch Fluid .................... 94
EngineOil ...................... 85
Fluid Locations ............... 84
Oil Pressure Warning


Light .......................... 22
Power Steering Fluid ........ 95
Transmission Oil/Fluid ...... 88


Operation In Foreign


Countries ....................... 58


Panel Brightness Control ...... 30
Parking Brake ..................... 34
Passive Belt ....................... 10
PGM-FI


Check Engine Warning


Light .......................... 23
......................... 130


System


Power


Door Locks .................... Mirrors .......................... 28
Steering ........................ 95
Windows ....................... 35
Pregnant Women ................ 17
Pressures, Tire Inflation ........ 104
Preventive Service .............. 111


Radiator Coolant ................. 90
Radio ................................ 51
Rear Quarter Windows ......... 36
Rearview Mirrors ................. 28
Rear Window Defogger ........ 27
Reminder


Lights .. See "Warning Lights"


(cont'd)


Index (cont'd)


Replacement


Air Filter ........................ 96
Bulbs ............................ 102
Engine Oil ...................... 86
Fuel Filter ....................... 96
Fuses ............................ 100
Oil Filter ......................... 86
Radiator Coolant ............. 91
Spark Plugs .................... 97
Tires ............................. 106
Wiper Blades .................. 98
Rust Prevention .................. 110


Safety Defects, Reporting ....133
Safety Indicator Lights ......... 24
Safety Items ...................... 63
Seat Belt Reminder Light and


Beeper .......................... 15


Seat Belts


Anchor Points ................. 17
Automatic Belt ............... 10
Buckling the Front


Seat Belts .................. 10


Buckling the Rear


Seat Belts .................. 13
Child Restraint ................ 16
Cleaning ........................ 18
Fasten Seat Belt Reminder


Light and Beeper ......... 15
Inspection ...................... 18
Passive Belt ................... 10
Pregnant Women ............ 17
Rear Center Seat Belt ....... 14
Replacement .................. 18
Shoulder Belt Buckle ........ 122


Seats


Driver's Lumbar


Support ..................... Front Seat ...................... Head Restraints .............. Trunk Access from


Rear Seat ...................


Shift Lever Position


Indicator ........................ 21


Shifting


Automatic ..................... 67
5-Speed ........................ 65


Spare Tire


Changing a Flat Tire ......... 115
COMPACT Spare Tire ...... 113
................ 124
Specifications Spark Plugs ........................ 97
Specifications .................... 124
Speedometer ...................... 20
Starting the Engine .............. 62
Steering


Anti-theft Column Lock .... 61
Power Steering ............... 95
Tilt Steering ................... 25


Stereo Sound System


Operation ...................... 51
Stuck Car .......................... 121
Sunroof


If the Sunroof Won't


Close ........................ 50
Maintenance .................. 50
Operation ...................... 49
Sunshade .......................... 49


Tachometer ....................... 20
Temperature Gauge,


Coolant ......................... 20
Tilt Steering ....................... 25
Tire


Air Pressure ................... 104
Balancing ....................... 105
Chains .......................... 105
Changing a Flat Tire ......... 115
COMPACT Spare ............113
DOT Tire Quality Grades ... 127
Inflation Pressures ........... 104
Requirement .................. 127
Rotation ........................ 105
Snow Tire ...................... 104
Spare Tire ...................... 113
Specification .................. 124
Tools ................................ 115
Towing ............................. 120
Towing a Trailer .................. 71
Trailer ............................... 71


Transmission


Capacity ........................ 124
Identification Number ...... 126
Oil/Fluid ......................... 88
Shifting the Automatic ..... 67
Shifting the 5 Speed ........ 65
Tread Wear ........................ 127
TripMeter .......................... 20
Trunk


Access From Rear Seat .... Lid ................................ Lid Warning Light ............ 24
Turn Signals ....................... 29


Vehicle Identification Number


.................................... 126
39


Ventilation .........................


Warning Lights Warranty Service Washer


................... 21
................ 132


Reservoir Capacity .......... Windshield Washer ..........


26
26
Washing ............................ 109
Waxing ............................. 110
Wheels .............................. 110
Windows


Appearance Care ............ 109
Power Windows ............. 35
Rear Quarter Windows ..... 36
27
Windshield Defogger ........... 26
Windshield Washer .............. 26
Windshield Wipers .............. Wiper Blades ...................... 98
.............................. 26
Wipers


Automobile Zone Office Locations


Western Zone P.O. Box 2260


700 Van Ness Avenue Torrance, California 90509-2260
(213) 781-4565


Central Zone 101 South Stanfield Road


Troy, Ohio 45373
(513) 332-6250


North Central Zone 601 Campus Drive, Suite A-9


Arlington Heights, Illinois 60004
(312) 870-5600


Northwestern Zone P.O. Box 20186


12439 N.E. Airport Way Portland, Oregon 97220
(503) 256-0943
(also includes Alaska and Hawaii)


South Central Zone 4529 Royal Lane


Irving, Texas 75063
(214) 929-5481


Northeastern Zone P.O. Box 337


Eastgate Industrial Park 115 Gaither Drive Moorestown, New Jersey 08057
(609) 235-5533


Mid-Atlantic Zone 209 Perry Parkway, Suite 10


Gaithersburg, Maryland 20877
(301) 990-2020


Southeastern Zone 1500 Morrison Parkway


Alpharetta, Georgia 30201
(404) 442-2045


New England Zone 555 Old County Road


Windsor Locks, Connecticut 06096
(203) 623-3310


West Central Zone 1600 South Abilene Street, Suite D


Aurora, Colorado 80012
(303) 696-3935


Puerto Rico and U.S. V.I. Bella International


P.O. Box 816
Hato Rey, Puerto Rico 00919
(809) 765-8070


The above addresses and telephone numbers are subject to change. If you cannot reach your Zone office, ask your Honda dealer for the current information.


Gas Station Information


Gasoline: UNLEADED only


Pump octane of 86 or higher


Gas Tank-Capacity: 64.5


(17.0 US gal)


Tire Pressure (measured cold): front/rear DX, LX: 200/200 kPa (29/29 psi) EX: 195/195 kPa (28/28 psi) COMPACT spare tire, 415 kPa (60 psi) Other Tire Information: Label on driver's door jamb Hood Release: Pull handle under left side of dash. Engine Oil: An "Energy Conserving II" SG grade oil is recommended.


See page 85 for viscosity recommendations. Capacity (Including filter): 3.8 (4.0 US qt)


5 Speed Transmission Oil:


Recommended type — SAE 10W — 30 or 10W — 40 weight, grade SE or SF. Capacity (Including differential): 1.9


(2.0 US qt)


Automatic Transmission Fluid:


Use DEXRON® II type Automatic Transmission Fluid (ATF). Remove dipstick from right end of transmission, wipe off, reinsert, remove, and read fluid level - do not force the rubber plug in when reading fluid level or replacing dipstick. Capacity (Including differential): 2.4


(2.5 US qt)


Power Steering Fluid:


Use only Honda power steering fluid: do not use ATF or any other brand of power steering fluid because it will damage the system.


AMERICAN HONDA MOTOR CO., INC. 1919 Torrance Blvd., Torrance California 90501


1989 American Honda Motor Co., Ltd. - All Rights Reserved


2D


31SM2602 00X31-SM2-6020


CRE 5009502
PRINTED IN U.S.A.


1990 Accord Coupe Online Reference Owner's Manual Use these links (and links throughout this manual) to navigate through this reference. For a printed owner's manual, click on authorized manuals or go to www.helminc.com.


Contents


Owner's Identification Form Features & Safety ................................................................................................................................ What you should know before driving your car. Starting & Driving............................................................................................................................. What gas to use, how to change gears, etc. Maintenance ...................................................................................................................................... 78
The Required Maintenance Schedule and some items you can service. Emergency Service .......................................................................................................................... 113
Changing a flat, jump starting, towing. Specifications ................................................................................................................................... 124
Dimensions, weights and capacities. Consumer Information .................................................................................................................... 126
Reporting Safety Detects, warranty service, vehicle identification numbers, etc. Index ................................................................................................................................................ 135
Gas Station Information


57


This Owner's Manual should be considered a permanent part of the vehicle, and must remain with the vehicle at time of resale.


OWNER'S I.D.


STATE


ZIP CODE


(Date sold to original retail purchaser)


DEALER NO.


STATE


ZIP CODE


OWNER


ADDRESS


CITY


V.I.N.


DELIVERY DATE


DEALER NAME


ADDRESS


CITY


OWNER'S SIGNATURE


DEALER'S SIGNATURE


The information and specifications included in this publication were in effect at the time of approval for printing. Honda Motor Co., Ltd. reserves the right however, to discontinue or change specifications or design at any time without notice and without incurring any obligation whatever.


Introduction


This manual contains important information about the safe operation and maintenance of your car.


We urge you to read it carefully, become familiar with the con- trols it describes, and follow its recommendations, to help make your driving trouble-free and enjoyable.


Statements or labels on the product preceded by the following words are of special significance:


indicates severe personal injury or death will


result if instructions are not followed.


indicates a strong possibility of severe personal


injury or death if instructions are not followed.


means hazards or unsafe practices which could cause minor personal injury or product or property damage.


NOTE: gives helpful information.


Break-in Period


During the first 600 miles (1,000 km) of driving, avoid full throttle starts and cruising for extended periods at a constant speed.


NOTE:


This break-in procedure also applies to exchanged or over- hauled engines. During and after the break-in period, drive the car at moder- ate speeds until the engine is fully warmed up.


During the first 200 miles (300 km), try to avoid severe braking. Brake misuse during this period will reduce future braking efficiency.


Remember, your Honda Automobile dealer knows your car best, and should be consulted for service assistance and advice.


Keys and Locks


Keys


VALET KEY


MASTER KEY


Your car is supplied with a master key that fits the ignition and all locks, and a valet key that fits the ignition and doors but not the trunk, trunk remote release, rear seat trunk access or glove box. The valet key is provided for times when you must leave the key with a park- ing attendant or repair person, but still want to keep valuables safely locked-up. Write down the numbers stamped on both keys and keep the information in your wallet or purse in case you ever need to have duplicates made. Both the master and valet keys are double-edged, so you can insert them in the locks with either side up.


Door Locks


You can lock the doors by pushing the tab forward. The doors must be unlocked before you can open them. The passenger door can be locked when open, and will stay locked when you close it; the driver's door cannot be locked when open unless you hold the door handle open. Both doors can be locked and unlocked from the outside with the key.


Unlock


Lock


(cont'd)


Keys and Locks (cont'd)


Power Door Locks (LX, EX)


Both doors can be simultaneously locked and unlocked by operating the master door lock switch located on each door.


Unlock


Lock


MASTER DOOR LOCK SWITCH


In addition, the passenger door will lock automatically when the tab on the driver's door is pushed forward, or when the driver's door is locked from the outside with the key.


Lock


Unlock


Lock


Trunk


The trunk can be opened by pulling up the lever at the left side of the driver's seat. To open the trunk lid from outside, put the master key in the lock and turn clockwise. The trunk lid opener lever is lockable with the master key.


Pull up


Lock


Open


MASTER KEY


MASTER KEY


Keep the trunk lid closed while driving, to keep poisonous carbon monoxide exhaust fumes out of the interior; prolonged exposure can cause unconsciousness that may lead to death.


Seats


Front Seat


Adjust the seat position by pulling up on the adjustment lever under the front edge of the seat cushion, and sliding the seat to the desired position. Then release the lever and make sure the seat is locked in position by moving it back and forth.


Pull up


Pull up


ADJUSTMENT LEVER


RELEASE LEVER


The angle of the seat-back can be changed by pulling up on the lever at the outside edge of the seat and leaning forward or back. Release the lever and let the seat lock into place when it reaches the desired angle. Seat belts are most effective when the driver and passenger are sitting up straight and well back in each seat.


Do not adjust the driver's seat while the car is moving; the seat could move suddenly, causing loss of vehicle control. To reduce the risk of sliding under the seat belts in a colli- sion, the seat-backs should be reclined no more than is necessary for comfort.


Driver's Lumbar Support (EX)


Support of the lower back can be adjusted by the knob on the inner side of the seat-back to give more or less support.


turning


Do not try to adjust lumbar support while driving. Make the adjustment while sitting in your normal driving posi- tion before driving away.


To Get In/Out of Rear Seat


to swing


For easier access to or from the rear seat, pull up the angle ad- justment lever on each front seat the seat-back forward. The front passenger seat has an additional conve- nience: pulling up the lever on the the passenger seat-back will swing the seat- back and slide the entire seat forward.


inside of


Push up


(cont'd)


Seats (cont'd)


Head Restraints


The head restraints are designed to help reduce injuries due to whiplash. They are located at the top of each front seat-back and have several height positions. They can be adjusted by pulling up to the recommended position. To lower them, slide the button next to the restraint's height bar, while pushing the restraint down. Adjust so the top of the restraint is approx- imately level with the tops of your ears. That position may reduce injury due to whiplash in an accident. If a head restraint must be removed (for cleaning, fabric repair, etc.) pull the restraint up to its highest position, then slide the button while pulling the restraint out. To reinstall, reverse the above procedure.


Slide


Do not drive the car with head restraints removed. Do not try to adjust head restraints while driving.


Trunk Access From Rear Seat


The rear seat-back can be opened by turning the lock on the rear shelf with the master key and pulling down the top of the seat-back. This allows access to the trunk and makes it possi- ble to carry long objects inside the car. The rear seat-back can also be released from inside the trunk by pulling the release. When closing the rear seat trunk access, push the seat-back firmly into place, then pull on the top of the seat-back to make sure it is secure.


RELEASE


Pull


MASTER KEY


Passengers or pets must not sit on the folded portion of the rear seat. Make sure any luggage or cargo within the trunk, or extend- ing through the rear seat trunk access is secured. Make sure the seat-back latches engage securely when the seat-back is returned to its normal position. Weight limits shown on the label on the driver's door jamb must be observed. The total weight of passengers and cargo must not exceed the total weight limit on the label. Do not store any items on the shelf behind the rear seat; they may become dangerous projectiles in a collision. Store any luggage or cargo in the trunk. If you are carrying more items than will fit in the trunk, use the floor space bet- ween the front and rear seats.


Seat Belts


Your Honda automobile is provided with seat belts to minimize the chance of injury to yourself and your passengers in a sud- den stop or accident. See pages 16 and 17 for precautions on using seat belts for children, babies, and pregnant women. Seat belts are most ef- fective when the driver and passengers are sitting up straight and well back in their seats.


In the event of a collision, occupants not wearing seat belts could be seriously or fatally injured. Make sure you and all your passengers ALWAYS put on the seat belts before driving away. CAUTION: Be careful the seat belts are not damaged by catching or entangling in the door or seat mechanism. Front Seat Belts The front seats have an automatic ("passive") restraint system consisting of a shoulder belt and knee bolsters. To enhance the protection provided by the automatic system, you should also wear the manual lap belt. The shoulder belt should remain permanently latched. The manual lap belt must be put on for maximum protection in the event of a collision. The automatic and manual belts have emergency locking retractors designed to lock only during a sudden stop or im- pact. Otherwise, they allow some freedom of movement in the seat. Operation 1. Enter the car and close the door completely. Move the seat a comfortable distance from the steering wheel, sit as straight up as possible and well back in the seat.


Never drive the car with the doors ajar. The front doors must be closed com- pletely for the front seat belts to function properly.


2. Turn the ignition ON. The shoulder belt buckle will move to its rear locked position. The length of the shoulder belt will adjust automatically to your body and seating position.


Normal movement of the shoulder belt buckle may cause injury. Be sure all parts of your body, especially fingers and hands, are clear of the shoulder buckle while it is moving.


NOTE:


If the door is not closed completely, the shoulder belt buckle will not move and the door warning light will come on (see page 24). If the door is opened with the ignition on, the buckle will release itself from its locked position and move forward. If the shoulder belt buckle stops halfway or does not move at all, see page 122 for shoulder belt buckle operation.


3. Take hold of the tongue plate of the lap belt and pull it from its retractor. Be sure the belt is not twisted or caught on anything.


If pulled too fast, the belt will lock. If this happens,


NOTE: allow the belt to retract then pull it out more slowly. 4. Push the tongue plate into the buckle until it clicks locked. Position the belt across your lap, not your abdomen, as low on your hips as possible.


Pull the belt across your lap


Keep below hip bone


TONGUE PLATE


Avoid placing the lap belt across your abdomen. In the event of a collision, the pressure of the belt on the abdomen may increase the extent of injury. Never use one belt for more than one person, child or adult. Comfort clips sold on the open market are not recommended since they could impair the function and safety of the belts.


(cont'd)


Seat Belts (cont'd)


Make sure the strap of the shoulder belt and the lap belt are not crossed. Do not wear the shoulder portion of the belt under your arm or out of position. Such use could increase the chance and amount of injury in an accident.


Releasing the Seat Belts


1 .To release the manual lap belt, push the "PRESS" button in the buckle, the belt should retract automatically when released.


2. The driver's shoulder belt buckle will release and travel to its


off position when the key is removed from the ignition.


3. The shoulder belt buckle will also release and travel to its off


position when the door is opened.


Push


Emergency Belt Release


The shoulder belt should al- ways remain buckled. In case of an emergency, however, the shoulder belt can be released from the shoulder belt buckle by pushing the button.


Relatch the shoulder belt before operating the car, making sure the belt is not twisted.


Driving with a twisted seat belt can increase your chance and extent of injury during a collision. Be sure the shoulder belt is not twisted before driving the car.


Buckling the Rear Seat Combination Lap/Shoulder Belts


there are


the rear seat,


two one-piece combination In lap/shoulder belts and a center lap belt. The seat-backs and seat belts provide best restraint when the occupant is sitting well back and straight up in the seat. The combination lap/shoulder belts with emergency locking retractors are designed to lock only during a sudden stop or im- pact. Otherwise, they allow you some freedom of movement in the seat. NOTE: The emergency locking system of the rear seat belts will also be activated if you pull the belt too fast. If this hap- pens, release the belt slightly then pull it out more slowly. 1. Take hold of the tongue plate and pull the belt across your lap. Be sure the belt is not twisted or caught on anything. Pull the belt across your lap


Take up slack


Too high


TONGUE PLATE


Keep below hip bone 2. Push the tongue plate into the buckle until it clicks locked. Position the belt across your lap, not your abdomen, as low on your hips as possible.


Avoid placing the lap belt across your abdomen.


In the event of a collision, the pressure of the belt on the ab- domen may increase the extent of injury. 3. To release the seat belt, push the "PRESS" button in the buckle; the belt should retract automatically when released. If the belt does not fully retract, pull it out and check for kinks or twists.


CAUTION: Make sure both rear shoulder belts are positioned in front of the rear seat-backs whenever the seat-backs are in their upright position.


(cont'd)


Seat Belts (cont'd)


Rear Center Seat Belt


Adjust the center lap belt length to fit snugly but comfortably when buckled. A slack belt will greatly reduce the protection afforded to the wearer. Hold the tongue plate perpendicular to the belt as shown. * To shorten, pull the end of the belt away from the tongue


plate.


* To lengthen, pull the tongue plate. Push the tongue plate into the buckle until it clicks locked and position the belt across your lap, not your abdomen, as low on your hips as possible. If worn across your abdomen, pressure of the seat belt on your abdomen may increase the extent of injury in the event of an accident.


TONGUE PLATE


To lengthen


To shorten


BUCKLE


Fasten Seat Belt Warning Light and Warning Beeper


Lap Belt Warning Indicator: Both the light and the warning beeper will go on for about six seconds if the igni- tion switch is turned on when the driver's lap belt is not fast- ened. The beeper will not go on if the driver's lap belt is fasten- ed, but the warning light will come on for about six seconds each time, to remind the driver to have passengers put their belts on.


Automatic Shoulder Belt Warning Indicator: The warning light will come on if either of the automatic shoulder belts is unlatched with the ignition ON. The beeper will sound for approximately six seconds while the warning light is ON. Relatch the belt: the light should go off when the belt is latched. The warning light will also come on while the shoulder belt buckle moves from its front off position to its rear locked position.


Automatic Shoulder Belt Malfunction Indicator: The warning light will flash and the beeper will sound rapidly if either shoulder belt buckle stops before completing its full cy- cle (see page 122 for manual operation).


NOTE: If the shoulder belt's tensioner mechanism locks and prevents the buckle from moving fully forward when you want to get out, recycle the system by closing the door and reopen- ing it. The buckle should move fully forward; if it does not, recline the seat-back and use Emergency Belt Release (see page 12). When the system does not function by either method, have the system checked by an authorized Honda dealer.


If the light and beeper do not function at all, or if they come on even with the belts latched and doors fully clos- ed, it indicates a malfunction in the seat belt system. In the event of a collision, severe personal injury could result. The system should be checked immediately by an authorized Honda dealer. (cont'd)


Seat Belts (cont'd)


Child Restraint


Children riding in the car should be restrained to minimize the risk of injury in an accident, sudden stop or sudden maneuver. According to accident statistics provided to the National Highway Traffic Safety Administration (NHTSA), children are safer when properly restrained in the rear seating positions than in the front seat. Larger children should use one of the seat belts provided. For smaller children, we strongly recommend the use of a com- mercially available child restraint system that meets the Federal Motor Vehicle Safety Standard (FMVSS) because it of- fers the most protection against injury. All states now have laws which require that small children must be seated in a child passenger seat restraint system. Check local laws. Before buying a particular child restraint system, make sure it fits your car seat and seat belts, and fits your child. Follow all the instructions that come with the system.


Children should never ride unrestrained in an automobile. Never use an infant carrier or child safety seat that "hooks" over a seat-back; it may not provide adequate security in an accident. Never allow a child to be held in a person's arms while they are in the moving vehicle. Holding a child in a moving vehicle does not provide the child with any means of protection dur- ing an accident, even if the person holding the child is wear- ing a seat belt.


Installation of Child Seat


All child restraint systems are designed to be secured by lap belts or the lap belt portion of a lap-shoulder belt. The auto- matic shoulder belt system at the front passenger seat should not be used to secure the child restraint system. If a child seat must be installed on the front seat, do the following: If the seat is installed facing forward, place the shoulder belt behind the child seat and secure the child seat with the lap belt only. If the seat is installed facing the rear of the car, place the shoulder belt between the car's seat-back and the base of the child seat and secure the child seat with the lap belt only. Children could be endangered in a crash, if their child restraints are not properly secured. Follow the child seat manufacturer's instructions when installing the seat.


Your Honda automobile is equipped with attachment points specifically for a rear seat mounted child restraint system which uses a top tether. The tether attachment points are located on the rear tray, just behind the rear seat-back.


When the child restraint system is not in use, remove it from the car or secure it with the seat belt to keep it from becoming a projectile in the event of an accident.


NOTE: See your Honda dealer for installation of the child restraint system.


Pregnant Women


A pregnant woman should use the shoulder and lap belts to help lessen the chance of injury and/or the amount of injury in an accident.


It is desirable that a pregnant woman ask her doc- tor at each medical check-up if she can drive, and also ask about the most appropriate way of wearing the lap/shoulder belt. If a rear seat lap belt is used, it should be worn as low and snugly as possible over the hips.


(cont'd)


Seat Belts (cont'd)


Inspection


All parts of the seat belts, including the belt fabric, should be regularly inspected for fraying, loosening, wear and other damage. Keep the belts in good condition at all times to reduce the chance of being injured in an accident, and to minimize any injuries that do occur. Make sure the buckles, retractors, tongue plates, guides and anchors all work properly.


Don't let anything get inside the buckle or the retractor; it could cause latch or retractor failure. Cleaning


The belts should always be kept clean and dry; wet or damp belts can cause rewinding problems. To clean the belts, pull them all the way out of their retractors and use warm water and a mild soap; then let them air-dry fully extended, in the shade, with the car windows open.


Never bleach, dye or clean the belts with chemical solvents; it will weaken the fabric. Do not remove the seat belts from the car to wash them.


Replacement


Replace the seat belt if: 1.The belting is cut, punctured, burned, etc. 2. The buckle or retractor does not work properly. 3. It was being worn at the time of a collision (also check for


damage at the seat belt anchor points).


4. Its condition is questionable.


Instrument Panel


CRUISE CONTROL MASTER SWITCH


WIPER/ WASHER SWITCH


HAZARD WARNING SWITCH


DIGITAL CLOCK


LIGHT SWITCH


SUNROOF SWITCH


REAR WINDOW DEFOGGER SWITCH


COIN BOX


HOOD RELEASE HANDLE


IGNITION SWITCH


FUSE BOX


TILT STEERING ADJUSTMENT LEVER


ASHTRAY


PANEL BRIGHTNESS CONTROL KNOB


HEATING/ COOLING CONTROL PANEL


CIGARETTE LIGHTER


GLOVE BOX


TACHOMETER


SPEEDOMETER


FUEL GAUGE


SHIFT LEVER POSITION INDICATOR (Automatic Trans. only)


COOLANT TEMPERATURE GAUGE


ODOMETER


TRIP METER


SAFETY INDICATOR LIGHTS


TRIP METER RESET BUTTON


Gauges


Speedometer


The speed is indicated in miles per hour (outside scale) and kilometers per hour (inside). Odometer


The numbers on the odometer indicate miles. The odometer registers total distance traveled, and serves as your guide for determining when periodic maintenance is due. Federal law makes it illegal to alter the odometer of any motor vehicle with the intent to change the number of miles indi- cated. Trip Meter


The numbers on the trip meter indicate miles. The trip meter can be returned to zero by pushing in the reset button. Use it for checking fuel consumption or distance traveled per trip. Tachometer


The tachometer indicates engine speed in revolutions per minute. The beginning of the RED ZONE indicates the max- imum allowable engine R.P.M. Do not run the engine with the tachometer indicator needle in the RED ZONE. Fuel Gauge


(17.0 US gal)


FUEL TANK CAPACITY: Approx. 64.5 As a convenience, the gauge continues to show the same fuel level as when the ignition was last on. After refueling, the gauge will slowly change to the new fuel level when the igni- tion is switched on. When the needle indicates E (empty), a usable reserve of about Coolant Temperature Gauge CAUTION: The needle should stay within the white range. If the needle reaches the red line at " H" (Hot), pull safely off the road, stop the engine and check the coolant level in the reserve tank on the passenger side of the radiator under the hood.


(1.1 US gal) remains in the tank.


Do not remove the radiator cap when the engine is hot. The coolant is under pressure and may blow out and scald you.


Warning and Indicator Lights


Shift Lever Position Indicator (Automatic transmission only)


A lighted indicator between the fuel and coolant temperature gauges shows which gear you have selected.


S Indicator Light


This indicator light will come on when the S switch is pushed. The S indicator light in the instrument panel also serves a se- cond function. If the light flashes while driving (in any gear range) it indicates a possible malfunction in the transmission; avoid rapid acceleration and have the transmission checked by an authorized Honda dealer as soon as possible.


Turn Signal/Hazard Warning Indicator Lights


When the turn signal lever is pushed for left or right turns, the appropriate green indicator arrow on the instrument panel will blink along with the signal. Turning on the hazard warning switch will make all turn signals and both arrows blink (see page 30).


Headlight High Beam Indicator Light


This blue indicator light will go on whenever the high beams are switched on (see page 29).


CRUISE CONTROL


Cruise Control Indicator Light (LX, EX)


When the cruise control system is on, this indicator light is on (see pages 32 and 33).


Fuel Reserve Warning Light


If the warning light glows, it means you have about 8.0 US gal) or less fuel remaining and should refuel.


(2.1
(cont'd)


Warning and Indicator Lights (cont'd)


Parking Brake/Brake Failure Warning Light


BRAKE Check the brake warning light every time you start the car. With the parking brake set, the warning light should go on when the ignition switch is turned to II or III. With the parking brake released, the light should go on when the ignition switch is turned to III. If the light goes on at any other time, it means the brake fluid level in the master cylinder reservoir is too low; add fluid (see page 94) and have your dealer check for leaks immediately.


Seat Belt Reminder Light


The seat belt reminder light comes on for approximately six seconds when the ignition switch is turned on (see page 15).


Oil Pressure Warning Light


A severe fluctuation in engine oil pressure will cause this light to flash on and off. You should stop as soon as possible, check the oil level, and add oil if necessary. The oil pressure warning light will come on, and remain on, if there is insufficient oil pressure or when the ignition switch is turned on with the engine not running. If the light should come on while driving, get the car off the road as soon as you can, turn the engine off and check the engine oil level (see page 85). Even if the oil level is correct, the engine should be checked by a Honda dealer before the car is driven again. NOTE: The oil pressure warning light will only light as a result of low oil pressure. It is not directly an oil level indicator. CAUTION: Running the engine while the oil pressure warning light is on constantly may cause immediate and severe engine damage.


Charging System Warning Light


The charging system warning light comes on when there is a problem with the electrical charging system or when the igni- tion switch is turned on with the engine not running. If the light comes on while driving, stop the car and check the alternator belt for proper tension. With the engine stopped, push down on the middle of the belt as shown; it should have 10 — 12 mm (0.4 — 0.5 in) deflection under a force of 98 N (22 Ib).


If the engine has been running, some engine components may be hot enough to burn you. Keep hands away from the radiator fan. The fan may start automatically without warning and run for up to 15 minutes, even after the engine is turned off.


NOTE: If necessary, have the charging system checked by an authorized Honda dealer.


Check Engine Warning Light


This light comes on for a couple of seconds each time the igni- tion is turned on. It will also come on, and remain on, if there is a malfunction in the emission control system. If the light comes on while driving, avoid driving at high speed, and have the system checked by a Honda dealer as soon as possible.


(cont'd)


Warning and Indicator Lights (cont'd)


Safety Indicator Lights:


Door and Trunk Lid Warning Lights


If a door or the trunk lid is open when the ignition is switched on, the appropriate indicator will light, and stay lit, until the door or trunk lid is closed.


BRAKE LAMP


Brake Lamp Warning Light


If a brake light does not work, the BRAKE LAMP indicator will go on when you push the brake pedal with the ignition on; the indicator will stay on until you have the lamp repaired or replac- ed. Have the brake lights checked as soon as possible.


It is dangerous to drive your car with a problem in either the brake electrical or hydraulic systems; have your dealer check both systems if you suspect brake trouble.


Checking the Safety Indicator Lights


The door, trunk lid and brake lamp warning lights should come on for about two seconds when the ignition switch is turned on. If they don't, have the system checked by a Honda dealer.


Tilt Steering


The steering wheel position can be adjusted to suit driver preference.


1. Push the lever located under the dash, on the left side of the steering column, all the way down and hold it while adjusting the steering wheel to the desired position.


2. To lock the steering wheel, hold it in the desired position and pull the lever all the way up.


Push down


TILT STEERING ADJUSTMENT LEVER


Pull up


Do not adjust the steering wheel position while driving. After adjusting the steering wheel position, make sure it is securely locked in place by ''rocking" it up and down slightly.


Windshield Wipers/Washer/Defogger


Windshield Wipers


Switch the wipers to INT for in- termittent operation; LO for low speed operation; and HI for high speed operation.


for


In fog or very light rain, push the lever down to the MIST position temporary high speed operation of the wipers. The wipers will return to the rest position and the motor will shut off as soon as you release the lever.


Washer


Push down


Pull the wiper switch lever toward you to turn on the washer.


Pull


On the LX and EX, the windshield wipers will sweep when the washer is operated. Check the washer fluid regularly, especially during bad weath- er, or whenever the washer has been in frequent use. The float in the neck of the reservoir indicates the fluid level.


WINDSHIELD WASHER RESERVOIR CAPACITY: 2.5


(2.6 US qt)


Use a good quality commercial washer fluid for all-weather cleaning.


WASHER FLUID RESERVOIR


FLOAT


CAUTION:


Do not use radiator antifreeze in the windshield washer; it will damage the paint. Do not use a vinegar/water combination in the windshield washer; it will damage the pump. Prolonged operation of the washer without fluid may damage the pump.


In freezing weather, warm the windshield with the defrosters before using the washer. This will help prevent icing which could seriously impair visibility. Rear Window Defogger


light when


Push the switch to turn the defogger on or off. The in- dicator will the defogger is on. The switch will turn off automatically 25 minutes after it is turned on. CAUTION: When cleaning the inside of the rear window, be careful not to damage the printed heater wires on the rear window. Wipe the window horizontally along the wires, not up and down.


Push


Mirrors


Rearview Mirrors


Keep the inside and outside mirrors clean and adjusted for best visibility. Be sure to adjust mirror angles before you start driving. The inside mirror has day and night positions. The night posi- tion reduces glare the headlights of vehicles behind you. Flip the small tab on the bottom of the mirror forward or backward to select day or night position.


DAY/NIGHT ADJUSTMENT TAB


from


On the DX, the outside mirror can be adjusted by moving the knob on the driver's door. Power Mirrors (LX, EX)


inside of


the


With the ignition switch in the position, move the main switch to L (for driver's side) or R (for passenger's side), then use the adjustment switch to adjust the outside mirror to the correct angle. After the mirrors have been adjusted, return the main switch to the center (off) position.


NOTE: Be sure to adjust mirror angles before you start driving.


MAIN SWITCH


ADJUSTMENT SWITCH


Turn Signals


Lights


to


FIRST STOP


FIRST STOP


RIGHT TURN


lever will


Push the turn signal lever down to signal a left turn, and up for a right turn. The indicator and lights will appropriate signal blink. The return its original automatically position when the steering wheel is returned to straight ahead. For lane changing, you can signal by pushing the lever part way up or down (to the first stop) and holding it there; the lever will return to its original position when you release it. If either turn signal indicator lights up but does not blink, blinks faster than usual or does not light up at all, check for a burned out bulb or fuse. Headlights


LEFT TURN


FIRST POSITION


Turn


Turn the light switch to the first position ( ) for taillights, lights, parking side marker lights, and instrument panel lights. Turn to the second posi- tion ( ) to illuminate the head- lights. If the driver's door is opened when the light switch is turned to either " o n" position, a chime will sound to remind you to turn off your lights. High Beam/Low Beam Switch


SECOND POSITION


The headlights may be switch- ed between low beam and high beam by pulling the turn signal lever towards you. The blue high beam indicator light will be on when the high beam is on. Headlight Flasher


Pull and release


To use the headlights as a passing signal, pull lightly on the turn signal lever and release. (cont'd)


Lights (cont'd)


Hazard Warning System


This system should be used on- ly when your car is stopped under emergency or hazardous conditions. To activate, push the hazard warning switch ). The front and rear turn signals will blink simultaneous- ly and both indicator lights will flash. Push the switch ( turn the system off.


) again to


Panel Brightness Control


is


When the light switch in either of the two " o n" posi- tions, the intensity of the in- strument lights can be ad- justed. Push the button so it pops out, then turn the panel brightness control knob.


Ignition Switch Light (LX, EX)


Push


Push


light will


This the switch for several seconds af- ter the driver's door is closed.


illuminate


Interior Light


The interior light has a three position switch. The light is off all the time in the OFF position. In the middle position, it goes on only when a door is opened. In the ON position, it is on all the time.


ON


OFF


Cruise Control (LX, EX)


Cruise Control The Cruise Control system allows you to set and automatically maintain any speed above 25 mph (40 km/h) without keeping your foot on the accelerator. As its name implies, it is meant for cruising on straight, uncongested highways or freeways. It is not recommended to be used in traffic, on winding roads or in bad weather conditions where the driver should have total control. To Set the Cruise Control:


to


the CRUISE CONTROL Push master switch on the dash; the indicator light will come on. Accelerate the desired speed, then push and release the SET switch on the steering wheel. The Cruise Control light on the instrument panel will come on. The speed you were going when you released the SET switch is the speed the Cruise Con- trol will hold. You can then "fine tune" the set speed by briefly holding and releasing the SET switch to decrease it a few mph or pushing the RESUME switch to slightly increase it. To Cancel the Cruise Control:


Push


Push


Simply push the CRUISE CON- TROL master switch and the indicator light will go off (this also erases the memory of the set speed). If you must temporarily disen- gage the system (but you wish to retain the memory of the set speed): tap the brake pedal, or the clutch pedal (5 speed transmission) or move the automatic transmission shift lever to N (Neutral). If you are still going above 25 mph (40 km/h), you can return to the set speed by simply pushing the RESUME switch. If the car has decelerated below approximately 25 mph (40 km/h), you can return to the set speed by using the accelerator conventionally until the speed is above 25 mph (40 km/h) and then pushing the RESUME switch.


To Change the Set Speed:


To a faster speed — For gradual acceleration with your foot off the accelerator, push and hold the RESUME switch until you reach the desired speed; release the switch and the system's memory will be re-programmed to the new speed. For faster acceleration, push the accelerator until you reach the desired speed, then push and release the SET switch to re-program the system.


To a slower speed — push and hold the SET switch and the car will coast; when you reach the desired slower speed, release the switch and the system will be re-programmed.


For temporary acceleration above the set speed, such as for passing, use the accelerator pedal conventionally. When you want to return to the set speed, take your foot off the ac- celerator and coast without applying the brakes.


The Cruise Control automates the function of the accelerator pedal to maintain your car at a constant speed. This can be a convenience on long trips, but it can also be a danger if there are many other cars on the road or if the road is unfamiliar. Pay strict attention to the responsibility of driving whenever using the Cruise Control.


CAUTION: Because the Cruise Control directly activates the accelerator pedal, don't rest your foot under the pedal when the Cruise Control is on; it may pull the pedal down onto your foot.


NOTE:


With Cruise Control on, your speed will still vary slightly, particularly when going up or down hills. Do not ride the brakes or clutch (5 speed transmission), as this will cause the Cruise Control to disengage.


Hood and Parking Brake


Hood


To open the hood, pull back on the handle located under the dash on the driver's side.


Pull to release


The hood latch is spring-loaded, so the hood will pop up slight- ly. Release the safety catch under the front center of the hood by pushing the rubber-tipped handle up. Lift the hood and prop it open with the support rod. To close, take the support rod down, place it back in its holder, lower the hood until it is ap- proximately one foot from the closed position, then let it drop. Be sure the hood is securely latched before driving away.


SUPPORT ROD


Parking Brake


Pull up


To apply the parking brake, pull up on the lever. To release it, pull up slightly, push the but- ton, and lower the lever; when fully the BRAKE warning light will go out.


released,


Power Windows (LX, EX)


DRIVER'S WINDOW SWITCH


Power Windows


The power windows can be op- erated only when the ignition switch is in the " I I" position. The operation of the windows is controlled by the main switch located in the master control panel on the armrest of the driver's door. When the main switch is off, only the driver's door window can be opened and closed. When the main switch is on, both door windows can be opened and closed by the driver, using the appropriate switch the master control panel, and the passenger window can be opened and closed by the passenger, using the switch located on the armrest of the passenger door. When opening or closing a win- dow, push and hold either the " u p" or " d o w n" side of the switch until the window reach- es the desired position, then release.


in


MAIN SWITCH


Close


Open


NOTE: The driver's window can be opened fully, without the driver having to hold the switch down, simply by push- ing the switch past the first "stop". Power Window Key-off Operation The power windows can still be operated for about 10 minutes after the ignition is turned from the " I I" to the " I" or " 0" posi- tion as long as neither front door has been opened.


Be sure, before closing any window, that all hands, arms and other obstructions are clear of the window frame and glass; severe personal injury could result. Always keep the main switch in the off position when children are in the car; injury may result from unintentional window operation.


Rear Quarter Windows and Clock


Rear Quarter Windows


To open, pull the latch toward you, then push it outward and lock it in place. To close and lock the window, pull the latch toward you, then push it backward until it snaps shut. Digital Clock


Pull


Then Push


The time is displayed continuously when the ignition is switch- ed to II or III. At all other times, push in on the lid to display the time. To adjust the time: 1. Lower the lid. 2. Push the minute button (M) and hold it until the numbers advance the desired minutes.


to


3. Push the hour button (H) and hold it until the numbers advance to the desired hour.


LID


4. The RESET button allows you to synchronize your clock to the closest hour. If the time on the clock is before the half hour, pressing the RESET button will return the time to the previous hour. If the time is beyond the half hour, the RESET button will change the time to the next hour.


NOTE: Be careful not to push the " H ", " M" or RESET but- tons accidentally. Pushing any of them will change the clock's time setting.


Glove Box and Beverage Holder (LX, EX)


Glove Box


Open by pulling the handle. Close with a firm push. The glove box door can be locked by using the master key. The glove box light will go on when the glove box door is opened and the headlights are on.


Do not drive the car with the glove box door open; it could cause injury in an acci- dent.


Open


Lock


Your car is equipped with a beverage holder for use while the car is stopped. Drinking while driving or driving with a beverage in the holder may be hazardous. Open the holder by pushing it.


NOTE: Use only lidded cups or containers that fit snugly in the beverage holder.


Spilling even a small amount while driving, especially if the liquid is hot, may distract the driver's attention from the road and could result in a serious collision. Alcohol and driving don't mix. For your safety, and the safe- ty of others, please do not drink and drive.


Cigarette Lighter and Ashtrays


Cigarette Lighter


Push in to heat up. It will auto- matically release when the ele- ment is hot. DO NOT hold it in while it is heating up.


Push


Front Ashtray


Open the ashtray by pulling its bottom edge toward you. To remove it, pull it out further while pushing down on the spring loaded plate inside.


Rear Ashtray


The rear ashtray is located at the rear of the center console. It is opened by pulling out the top edge. To remove it, open the ashtray and release its bot- tom edge by pulling up, then out. To the removal procedure.


reverse


install,


To remove, pull up and out


CAUTION: Do not use the ashtrays as trash containers; use them only for extinguished cigarettes. Putting lit cigarettes or matches in an ashtray with other combustible materials may cause a fire.


Heating and Cooling


The vents, heater and air conditioner (optional on DX) are com- bined in one system; adjusting four basic controls to different settings can provide a full range of interior temperatures for safe and comfortable driving. Ventilation


The flow-through ventilation system can provide fresh air to the interior when the car is moving or stopped, even with the windows closed.


NOTE: For proper air flow, the flow-through vents must not be covered. Keep the air inlet at the base of the windshield free of leaves or other debris.


AIR INLET


AIR OUTLET


You can adjust the controls to direct cool or warm outside air throughout the car for defogging windows, heating, or cooling by turning on the fan.


(cont'd)


Heating and Cooling (cont'd)


Dash Vents The corner vents can be used for flow-through ventilation, or during the heating and air conditioning operation. The corner and center vents can be tilted up or down, and their louvers turned right or left, to change the direction of air flow. The amount of air flow from the corner and center vents can be regulated by the control located beside each vent.


CENTER VENTS


SIDE DEFROSTER VENT


Open HALF Close


SIDE DEFROSTER VENT


Open HALF Close


DASH CORNER VENT


WINDSHIELD DEFROSTER VENT


Open HALF Close


DASH CORNER VENT


What the Controls Do: [DX]


FAN SWITCH


FUNCTION LEVER


RECIRCULATION BUTTON AND INDICATOR LIGHT


TEMPERATURE LEVER


AIR CONDITIONER BUTTON AND INDICATOR LIGHT (optional)


[LX/EX1]


FAN SWITCH


TEMPERATURE CONTROL DIAL


FUNCTION BUTTONS AND INDICATOR LIGHTS


FRESH AIR BUTTON


RECIRCULATION BUTTON


AIR CONDITIONER BUTTON


the


temperature


lever/control dial and


Fan Switch Turning the switch clockwise will increase the fan speed, and the fan will circulate warm, cool, or outside air, depending on where function lever/buttons are set. Whenever the fan is switched on, air flows from the dash cor- ner vents regardless of function lever/button position. Function Lever/Buttons Slide the lever on the DX model or push the appropriate button on the LX and EX models to direct air to and from the heater, defroster and vents. There is an indicator light in each function button that comes on when the button is pushed. (cont'd)


Heating and Cooling (cont'd)


Temperature Lever/Control Dial


Slide the lever from left to right on the DX model or turn the dial clockwise on the LX and EX models to make air warmer when the appropriate function is selected. Air Conditioner Switch (optional on DX)


Buttons


and Recirculation


button's indicator light is out, outside air will


With the fan on, push the A/C button to operate the air condi- tioner. The indicator light will come on. Push the button again to turn the air conditioner off. Fresh Air [DX] When the be allowed to circulate inside the car. When the button is pushed in and the indicator light comes on, outside air is shut off and the air inside the car is recirculated. If the heater or air conditioner is on and you want to warm up or cool down the interior more quickly, or keep smoke or dust out of the car without losing the heat or cool function, simply push the [LX/EX] When the and outside air will be allowed to circulate inside the car. When the button is pushed, the indicator light comes on, outside air is shut off and the air inside the car is recirculated. If the heater or air conditioner is on and you want to warm up or cool down the interior more quickly, or keep smoke or dust out of the car without losing the heat or cool function, simply push the [DX]


button is pushed, the indicator light will go on


button.


button.


[LX/EX]


NOTE: The windows may become fogged if the system is in the setting for an extended period of time with the air conditioner off. As soon as the interior is warmed, switch to


setting.


How to Use the Controls To Ventilate [DX] Move the temperature lever to the left, select the tion and push the Switch the fan on and outside air will flow through the corner

Loading...
x