Login- Download PDF Manual
-
the carburetor or fuel injection system.
Ensure that the cables are clear of fan blades, belts, moving parts of both engines, or any fuel delivery system parts.
Jump Starting 1. Start the engine of the booster vehicle and run the engine at a moderately increased speed. 2. Start the engine of the disabled vehicle. 3. Once the disabled vehicle has been started, run both engines for an additional three minutes before disconnecting the jumper cables.
2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012
USA (fus)Roadside Emergencies
221
Removing the Jumper Cables Note: In the illustration, the vehicle on the bottom is used to designate the assisting (boosting) battery. Remove the jumper cables in the reverse order that they were connected.
1. Remove the jumper cable from the ground metal surface. 2. Remove the jumper cable on the negative (-) terminal of the booster vehicle’s battery. 3. Remove the jumper cable from the positive (+) terminal of the booster vehicle’s battery. 4. Remove the jumper cable from the positive (+) terminal of the disabled vehicle’s battery.
After the disabled vehicle has been started and the jumper cables removed, allow it to idle for several minutes so the engine computer can relearn its idle conditions.
2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012
USA (fus)222
Customer Assistance
GETTING THE SERVICES YOU NEED Warranty repairs to your vehicle must be performed by an authorized dealer. While any authorized dealer handling your vehicle line will provide warranty service, we recommend you return to your selling authorized dealer who wants to ensure your continued satisfaction. Please note that certain warranty repairs require special training, equipment or both, so not all authorized dealers are authorized to perform all warranty repairs. This means that, depending on the warranty repair needed, you may have to take your vehicle to another authorized dealer. A reasonable time must be allowed to perform a repair after taking your vehicle to the authorized dealer. Repairs will be made using Ford or Motorcraft parts, or remanufactured or other parts that are authorized by Ford.
Away from Home If you are away from home when your vehicle needs service, contact the Ford Customer Relationship Center or use the online resources listed below to find the nearest authorized dealer. In the United States: Mailing Address Ford Motor Company Customer Relationship Center P.O. Box 6248
Dearborn, MI 48121
Telephone 1-800-392-3673 (FORD) (TDD for the hearing impaired: 1-800-232-5952) Online Additional information and resources are available online at www.fordowner.com. These are some of the items that can be found online: • U.S. Dealer Locator by Dealer Name, City/State, or Zip Code • Owner Manuals • Maintenance Schedules • Recalls • Ford Extended Service Plans2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012
USA (fus)Customer Assistance
223
• Ford Genuine Accessories • Service specials and promotions. In Canada: Mailing address Customer Relationship Centre Ford Motor Company of Canada, Limited P.O. Box 2000
Oakville, Ontario L6K 0C8
Telephone 1-800-565-3673 (FORD) Online www.ford.ca Additional Assistance If you have questions or concerns, or are unsatisfied with the service you are receiving, follow these steps: 1. Contact your Sales Representative or Service Advisor at your selling or servicing authorized dealer. 2. If your inquiry or concern remains unresolved, contact the Sales Manager, Service Manager or Customer Relations Manager. 3. If you require assistance or clarification on Ford Motor Company policies, please contact the Ford Customer Relationship Center. In order to help serve you better, please have the following information available when contacting a Customer Relationship Center: • Vehicle Identification Number (VIN) • Your telephone number (home and business) • The name of the authorized dealer and city where located • The vehicle’s current odometer reading. In some states, you must directly notify Ford in writing before pursuing remedies under your state’s warranty laws. Ford is also allowed a final repair attempt in some states. In the United States, a warranty dispute must be submitted to the BBB AUTO LINE before taking action under the Magnuson-Moss Warranty Act, or to the extent allowed by state law, before pursuing replacement or repurchase remedies provided by certain state laws. This dispute handling procedure is not required prior to enforcing state created rights or other rights which are independent of the Magnuson-Moss Warranty Act or state replacement or repurchase laws.2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012
USA (fus)224
Customer Assistance
IN CALIFORNIA (U.S. ONLY) California Civil Code Section 1793.2(d) requires that, if a manufacturer or its representative is unable to repair a motor vehicle to conform to the vehicle’s applicable express warranty after a reasonable number of attempts, the manufacturer shall be required to either replace the vehicle with one substantially identical or repurchase the vehicle and reimburse the buyer in an amount equal to the actual price paid or payable by the consumer (less a reasonable allowance for consumer use). The consumer has the right to choose whether to receive a refund or replacement vehicle. California Civil Code Section 1793.22(b) presumes that the manufacturer has had a reasonable number of attempts to conform the vehicle to its applicable express warranties if, within the first 18 months of ownership of a new vehicle or the first 18000 mi (29 000 km), whichever occurs first: 1. Two or more repair attempts are made on the same nonconformity likely to cause death or serious bodily injury OR 2. Four or more repair attempts are made on the same nonconformity (a defect or condition that substantially impairs the use, value or safety of the vehicle) OR 3. The vehicle is out of service for repair of nonconformities for a total of more than 30 calendar days (not necessarily all at one time). In the case of 1 or 2 above, the consumer must also notify the manufacturer of the need for the repair of the nonconformity at the following address: Ford Motor Company 16800 Executive Plaza Drive Mail Drop 3NE-B Dearborn, MI 48126
You are required to submit your warranty dispute to BBB AUTO LINE before asserting in court any rights or remedies conferred by California Civil Code Section 1793.22(b). You are also required to use BBB AUTO LINE before exercising rights or seeking remedies created by the Federal Magnuson-Moss Warranty Act, 15 U.S.C. sec. 2301 et seq. If you choose to seek redress by pursuing rights and remedies not created by California Civil Code Section 1793.22(b) or the Magnuson-Moss Warranty Act, resorting to BBB AUTO LINE is not required by those statutes.2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012
USA (fus)Customer Assistance
225
THE BETTER BUSINESS BUREAU (BBB) AUTO LINE PROGRAM (U.S. ONLY) Your satisfaction is important to Ford Motor Company and to your dealer. If a warranty concern has not been resolved using the three-step procedure outlined earlier in this chapter in the Getting the Services You Need section, you may be eligible to participate in the BBB AUTO LINE program. The BBB AUTO LINE program consists of two parts – mediation and arbitration. During mediation, a representative of the BBB will contact both you and Ford Motor Company to explore options for settlement of the claim. If an agreement is not reached during mediation or you do not want to participate in mediation, and if your claim is eligible, you may participate in the arbitration process. An arbitration hearing will be scheduled so that you can present your case in an informal setting before an impartial person. The arbitrator will consider the testimony provided and make a decision after the hearing. Disputes submitted to the BBB AUTO LINE program are usually decided within 40 days after you file your claim with the BBB. You are not bound by the decision, and may reject the decision and proceed to court where all findings of the BBB Auto Line dispute, and decision, are admissible in the court action. Should you choose to accept the BBB AUTO LINE decision, Ford is then bound by the decision, and must comply with the decision within 30 days of receipt of your acceptance letter. BBB AUTO LINE Application: Using the information provided below, please call or write to request a program application. You will be asked for your name and address, general information about your new vehicle, information about your warranty concerns, and any steps you have already taken to try to resolve them. A Customer Claim Form will be mailed that will need to be completed, signed and returned to the BBB along with proof of ownership. Upon receipt, the BBB will review the claim for eligibility under the Program Summary Guidelines. You can get more information by calling BBB AUTO LINE at 1-800-955-5100, or writing to: BBB AUTO LINE 3033 Wilson Boulevard, Suite 600
Arlington, Virginia 22201
BBB AUTO LINE applications can also be requested by calling the Ford Motor Company Customer Relationship Center at 1-800-392-3673. Note: Ford Motor Company reserves the right to change eligibility limitations, modify procedures, or to discontinue this process at any time without notice and without obligation.2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012
USA (fus)226
Customer Assistance
UTILIZING THE MEDIATION or ARBITRATION PROGRAM (CANADA ONLY) This pertains to vehicles delivered to authorized Canadian dealers. In those cases, where you continue to feel that the efforts by Ford of Canada and the authorized dealer to resolve a factory-related vehicle service concern have been unsatisfactory, Ford of Canada participates in an impartial third party mediation or arbitration program administered by the Canadian Motor Vehicle Arbitration Plan (CAMVAP). The CAMVAP program is a straightforward and relatively speedy alternative to resolve a disagreement when all other efforts to produce a settlement have failed. This procedure is without cost to you and is designed to eliminate the need for lengthy and expensive legal proceedings. In the CAMVAP program, impartial third-party arbitrators conduct hearings at mutually convenient times and places in an informal environment. These impartial arbitrators review the positions of the parties, make decisions and, when appropriate, render awards to resolve disputes. CAMVAP decisions are fast, fair, and final as the arbitrator’s award is binding on both you and Ford of Canada. CAMVAP services are available in all Canadian territories and provinces. For more information, without charge or obligation, call your CAMVAP Provincial Administrator directly at 1-800-207-0685 or visit www.camvap.ca.
GETTING ASSISTANCE OUTSIDE THE U.S. AND CANADA Before exporting your vehicle to a foreign country, contact the appropriate foreign embassy or consulate. These officials can inform you of local vehicle registration regulations and where to find unleaded fuel. If you cannot find unleaded fuel or can only get fuel with an anti-knock index lower than is recommended for your vehicle, contact our Customer Relationship Center. The use of leaded fuel in your vehicle without proper conversion may damage the effectiveness of your emission control system and may cause engine knocking or serious engine damage. Ford Motor Company or Ford of Canada is not responsible for any damage caused by use of improper fuel. Using leaded fuel may also result in difficulty importing your vehicle back into the United States.
2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012
USA (fus)Customer Assistance
227
If your vehicle must be serviced while you are traveling or living in Asia-Pacific Region, Sub-Saharan Africa, U.S. Virgin Islands, Central America, the Caribbean, and Israel, contact the nearest authorized dealer. If the authorized dealer cannot help you, contact: FORD MOTOR COMPANY FORD EXPORT OPERATIONS & GLOBAL INITIATIVES Customer Relationship Center 1555 Fairlane Drive Fairlane Business Park #3
Allen Park, Michigan 48101
U.S.A. Telephone: (313) 594-4857
FAX: (313) 390-0804 Email: [email protected] For customers in Guam, the Commonwealth of the Northern Mariana Islands (CNMI), America Samoa, and the U.S. Virgin Islands, please feel free to call our Toll-Free Number: (800) 841-FORD (3673) If your vehicle must be serviced while you are traveling or living in Puerto Rico, contact the nearest authorized dealer. If the authorized dealer cannot help you, contact: FORD MOTOR COMPANY FORD EXPORT OPERATIONS & GLOBAL INITIATIVES Customer Relationship Center 1555 Fairlane Drive Fairlane Business Park #3
Allen Park, Michigan 48101
U.S.A. Telephone: (313) 594-4857
FAX: (313) 390-0804 Email: www.ford.com.pr If your vehicle must be serviced while you are traveling or living in the Middle East, contact the nearest authorized dealer. If the authorized dealer cannot help you, contact: Ford Middle East Customer Relationship Center P.O. Box 21470 Dubai, United Arab Emirates Telephone: +971 4 3326084
Toll-Free Number of the Kingdom of Saudi Arabia: 800 8971409
Local Telephone Number of Kuwait: 24810575
FAX: +971 4 3327299
Email: [email protected] www.me.ford.com2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012
USA (fus)228
Customer Assistance
If you buy your vehicle in North America and then relocate to any of the above locations, register your vehicle identification number (VIN) and new address with Ford Motor Company Export Operations & Global Growth Initiatives by emailing [email protected]. If you are in another foreign country, contact the nearest authorized dealer. In the event your inquiry is unresolved, communicate your concern with the dealership’s Sales Manager, Service Manager or Customer Relations Manager. If you require additional assistance or clarification, please contact the respective Customer Relationship Center as previously listed. Customers in the U.S. should call 1-800-392-3673.
ORDERING ADDITIONAL OWNER’S LITERATURE To order the publications in this portfolio, contact Helm, Incorporated at: HELM, INCORPORATED 47911 Halyard Drive Plymouth, Michigan 48170
Attention: Customer Service Or to order a free publication catalog, call toll free: 1-800-782-4356
Monday-Friday 8:00 a.m. - 6:00 p.m. EST Helm, Incorporated can also be reached by their website: www.helminc.com. (Items in this catalog may be purchased by credit card, check or money order.)Obtaining a French Owner’s Manual A French owner’s manual can be obtained from your authorized dealer or by contacting Helm, Incorporated using the contact information listed previously in this section.
2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012
USA (fus)Customer Assistance
229
REPORTING SAFETY DEFECTS (U.S. ONLY)
If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety
Administration (NHTSA) in addition to notifying Ford Motor Company. If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, NHTSA cannot become involved in individual problems between you, your dealer, or Ford Motor Company. To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at 1–888–327–4236 (TTY: 1–800–424–9153); go to http://www.safercar.gov; or write to: Administrator 1200 New Jersey Avenue, Southeast Washington, D.C. 20590
You can also obtain other information about motor vehicle safety from http://www.safercar.gov.REPORTING SAFETY DEFECTS (CANADA ONLY) If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform Transport Canada, using their toll-free number: 1–800–333–0510, or online at: https://wwwapps.tc.gc.ca/Saf-Sec-Sur/7/PCDB-BDPP/Index.aspx.
2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012
USA (fus)230
Fuses
CHANGING A FUSE
Fuses
WARNING: Always replace a fuse with one that has the specified amperage rating. Using a fuse with a higher amperage
rating can cause severe wire damage and could start a fire.
If electrical components in the vehicle are not working, a fuse may have blown. Blown fuses are identified by a broken wire within the fuse. Check the appropriate fuses before replacing any electrical components.
15
Standard Fuse Amperage Rating and Color
COLOR
Fuse rating
2A 3A 4A 5A 7.5A 10A 15A 20A 25A 30A 40A 50A 60A 70A 80A
Mini fuses
Grey Violet Pink Tan
Brown
Red Blue Yellow Natural Green
— — — — —
Standard
fuses
Grey Violet Pink Tan
Brown
Red Blue Yellow Natural Green
— — — — —
Maxi fuses
Cartridge
maxi fuses
Fuse link cartridge
— — — — — — —
Yellow
—
Green Orange
Red Blue Tan
Natural
— — — — — — — Blue
— — — — — — — Blue
Natural
Natural
Pink Green Red Yellow
—
Black
Pink Green Red Yellow Brown Black
2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012
USA (fus)Fuses
231
FUSE SPECIFICATION CHART
Power Distribution Box
WARNING: Always disconnect the battery before servicing high current fuses.
WARNING: To reduce risk of electrical shock, always replace the cover to the power distribution box before reconnecting the
battery or refilling fluid reservoirs.
The power distribution box is located in the engine compartment. It has high-current fuses that protect your vehicle’s main electrical systems from overloads. If the battery has been disconnected and reconnected, see Changing the Vehicle Battery in the Maintenance chapter.
The high-current fuses are coded as follows:
Fuse or relay
Fuse amp
Protected components
number
rating 80A*
—
Passenger compartment fuse panel Not used
2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012
USA (fus)232
Fuses
Fuse or relay
number
Fuse amp
rating
Protected components
10
11
1213
14
1516
17
18
19
20
21
22
2324
25
2627
28
—
30A* 20A* 40A* 40A* 40A* 30A* 30A*
—
20A*
20A** 25A** 20A** 10A**
20A** 10A** 20A* 30A* 30A* 30A* 20A* 10A**
10A** 10A** 20A**
20A**
—
Not used Blower motor relay Power point (body) Rear defroster relay Cooling fan relay Anti-lock brake system pump Wipers Anti-lock brake system valve Not used Differential fluid pump (Shelby only) Fuel pump relay (non-Shelby) Fuel pump relay (Shelby only) Fuel pump relay #2 (Shelby only) Intercooler pump relay (Shelby only) Heated seats Alternator sense Auxiliary body module Starter relay Rear amplifier (Shaker Pro radio) Powertrain relay Power point (instrument panel) Powertrain control module keep-alive power Brake on/off power A/C compressor relay Left high intensity discharge headlamp relay Right high intensity discharge headlamp relay Not used
2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012
USA (fus)Fuses
233
Fuse or relay
Fuse amp
Protected components
number
29
30
31
32
33
34
35
36
37
38
39
4041
4243
44
4546
rating 30A*
—
30A* 30A* 30A* 30A* 40A* Diode
—
15A** 5A** 15A**
G8VA relay G8VA relay
G8VA relay G8VA relay
5A**
5A**
Passenger front window Not used Passenger power seat Driver power seat Front amplifier (Shaker radio) Driver front window motor Convertible top motor Fuel diode Not used Fuel injectors (Shelby only) Heated mirrors Powertrain control module vehicle power 4 – ignition coil Fuel pump relay Intercooler pump relay (Shelby only) A/C compressor relay Fuel pump relay #2 (Shelby only) Powertrain control module run/start Powertrain control module vehicle power 3 – general powertrain components
2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012
USA (fus)234
Fuses
Fuse or relay
Fuse amp
Protected components
number
47
48
49
50
51
52
53
54
55
56
57
58rating 15A**
15A**
15A**
Full ISO relay Full ISO relay Full ISO relay Full ISO relay Full ISO relay Full ISO relay
—
Full ISO relay High current
relay
Powertrain control module vehicle power 1
Powertrain control module vehicle power 5
Powertrain control module vehicle power 2 – emissions related powertrain components Cooling fan relay (high) Blower motor relay Starter relay Rear defroster relay Front wiper relay Cooling fan relay (low) Not used Powertrain control module relay Differential fluid pump (Shelby only)* Cartridge Fuses ** Mini Fuses
2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012
USA (fus)Fuses
235
Passenger Compartment Fuse Panel The fuse panel is located in the lower passenger side area behind the kick panel. Open the trim panel door and remove the fuse cover to access the fuses. Use the provided fuse puller tool to remove a fuse. It is located inside the fuse cover.
The fuses are coded as follows:
Fuse or relay
Fuse amp
Protected components
number
rating
30A
15A 15A 30A
10A
Driver rear window (convertible only) Not used (spare) SYNC Passenger rear window (convertible only) Brake transmission shift interlock
2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012
USA (fus)236
Fuses
Fuse or relay
number
Fuse amp
rating
Protected components
10
11
12
13
1415
16
17
18
19
20
21
22
23
24
2526
27
28
29
30
3120A 10A 10A 15A 15A
10A 7.5A 5A 10A
10A 15A 20A 20A 25A 15A 15A 15A 15A 20A 10A
10A 20A 5A 5A 5A 10A
Turn signals, Hazard flashers Left low beam headlamp Right low beam headlamp Courtesy lamps Switch illumination, Pony projection lights Security module Power mirrors Not used (spare) Center information display, Electronic finish panel, Global position system Climate control Not used (spare) Power door locks, Trunk release Not used (spare) Not used (spare) Diagnostic connector Fog lamps Park lamps, License lamps High beam headlamps Horn Demand lighting (battery saver), Visor vanity lamps Cluster (battery) Ignition switch feed Audio mute (start) Camera (run/start) Temperature sensor motor Restraints control module
2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012
USA (fus)Fuses
237
Fuse or relay
Fuse amp
Protected components
number
32
33
34
35
36
37
38
39
40
4142
43
44
4546
47
48
rating
10A
10A 5A 10A 5A 10A 20A 20A 20A 15A
10A 10A 10A 5A
7.5A
30A Circuit
Breaker Relay
Reverse parking aid (non-Shelby), Vehicle dynamics control module (Shelby only) Not used (spare) Electronic stability control Auxiliary body module run/start Anti-theft system Rear defroster relay coil Not used (spare) Radio/Navigation Not used (spare) Accessory delay (windows, automatic dimming rear view mirror [including microphone and compass] and door switch III) Not used (spare) Heated seat relay coils Not used (spare) Wiper relay and module, Blower relay Passenger airbag deactivation indicator, Occupant classification sensor Not used (spare)
Accessory delay relay (windows, automatic dimming rear view mirror [including microphone and compass] and door switch III)
Auxiliary Relay with Heated Seats (If Equipped) Vehicles equipped with heated seats have a relay box located under the driver seat. This box contains two relays for the driver and passenger heated seats.
2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012
USA (fus)238
Maintenance
GENERAL INFORMATION Have your vehicle serviced regularly to help maintain its roadworthiness and resale value. There is a large network of Ford authorized dealers who are there to help you with their professional servicing expertise. We believe that their specially trained technicians are best qualified to service your vehicle properly and expertly. They are supported by a wide range of highly specialized tools developed specifically for servicing your vehicle. To help you service your vehicle, we provide Scheduled Maintenance Information which makes tracking routine service easy. If your vehicle requires professional service, your authorized dealer can provide the necessary parts and service. Check your warranty information to find out which parts and services are covered. Use only recommended fuels, lubricants, fluids and service parts conforming to specifications. Motorcraft® parts are designed and built to provide the best performance in your vehicle.
Precautions • Do not work on a hot engine. • Make sure that nothing gets caught in moving parts. • Do not work on a vehicle with the engine running in an enclosed • Keep all open flames and other burning material (such as cigarettes)
space, unless you are sure you have enough ventilation.
away from the battery and all fuelrelated parts.
Working with the Engine Off 1. Set the parking brake and shift to P (Park). 2. Turn off the engine and remove the key (if equipped). 3. Block the wheels.
2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012
USA (fus)Maintenance
239
Working with the Engine On
WARNING: To reduce the risk of vehicle damage or personal burn injuries, do not start your engine with the air cleaner
removed and do not remove it while the engine is running.
1. Set the parking brake and shift to positionP. 2. Block the wheels.
OPENING AND CLOSING THE HOOD
1. Inside the vehicle, pull the hood release handle located on the driver’s side kick panel.
2. Go to the front of the vehicle and release the auxiliary latch that is located under the front center of the hood.
3. Lift the hood and secure it with the prop rod.
2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012
USA (fus)240
Maintenance
UNDER HOOD OVERVIEW
3.7L V6 Engine
A. Battery B. Engine oil dipstick C. Engine oil filler cap D. Brake fluid reservoir E. Air filter assembly F. Engine coolant reservoir G. Windshield washer fluid reservoir H. Power distribution box
2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012
USA (fus)Maintenance
241
5.0L V8 Engine
A. Battery B. Engine oil filler cap C. Engine oil dipstick D. Brake fluid reservoir E. Air filter assembly F. Engine coolant reservoir G. Windshield washer fluid reservoir H. Power distribution box
2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012
USA (fus)242
Engine Shield
Maintenance
Some vehicles may be equipped with an aero-shield under the engine. Remove the front fasteners of the shield to gain access for service. This includes oil and filter changes.
ENGINE OIL DIPSTICK
A. MIN B. MAX
ENGINE OIL CHECK Note: Check the level before starting the engine. Note: Make sure that the level is between the MIN and MAX marks. 1. Make sure that your vehicle is on level ground. 2. Turn the engine off and wait 10 minutes for the oil to drain into the oil pan. 3. Remove the dipstick and wipe it with a clean, lint-free cloth. Replace the dipstick and remove it again to check the oil level. If the level is at the MIN mark, add oil immediately.
2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012
USA (fus)Maintenance
243
Adding Engine Oil Note: Do not remove the filler cap when the engine is running. Note: Do not add engine oil further than the MAX mark. Oil levels above the MAX mark may cause engine damage.
Only use oils certified for gasoline engines by the American Petroleum Institute (API). An oil with this trademark symbol conforms to the current engine and emission system protection standards and fuel economy requirements of the International Lubricants Specification Advisory Council (ILSAC), comprised of U.S. and Japanese automobile manufacturers.
1. Remove the filler cap. 2. Add engine oil that meets Ford specifications. See Capacities and Specifications for more information. 3. Replace the filler cap. Turn it until you feel a strong resistance.
ENGINE COOLANT CHECK
Checking the Engine Coolant The concentration and level of engine coolant should be checked at the intervals listed in Scheduled Maintenance Information. Note: Make sure that the level is at the FULL COLD level or within the COLD FILL RANGE in the coolant reservoir. Note: Coolant expands when it is hot. The level may extend beyond the COLD FILL RANGE. If the level is below the COLD FILL RANGE, add coolant immediately. See Adding Engine Coolant in this chapter. The coolant concentration should be maintained within 48% to 50%, which equates to a freeze point between -30°F (-34°C) and -34°F (-37°C). Note: For best results, coolant concentration should be tested with a refractometer such as Rotunda tool 300ROB75240 available from your dealer. Ford does not recommend the use of hydrometers or coolant test strips for measuring coolant concentrations. Note: Automotive fluids are not interchangeable; do not use engine coolant/antifreeze or windshield washer fluid outside of its specified function and vehicle location.
2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012
USA (fus)244
Maintenance
Adding Engine Coolant
WARNING: Do not add engine coolant when the engine is hot. Steam and scalding liquids released from a hot cooling system
can burn you badly. Also, you can be burned if you spill coolant on hot engine parts.
WARNING: Do not put engine coolant in the windshield washer fluid container. If sprayed on the windshield, engine coolant
could make it difficult to see through the windshield.
WARNING: To reduce the risk of personal injury, make sure the engine is cool before unscrewing the coolant pressure relief cap. The cooling system is under pressure; steam and hot liquid can come out forcefully when the cap is loosened slightly.
WARNING: Do not add coolant further than the MAX mark of the COLD FILL RANGE.
Note: Do not use stop leak pellets or cooling system sealants or additives as they can cause damage to the engine cooling and or heating systems. This damage would not be covered under your vehicle’s warranty. Note: During normal vehicle operation, the engine coolant may change color from orange to pink or light red. As long as the engine coolant is clear and uncontaminated, this color change does not indicate the engine coolant has degraded nor does it require the engine coolant to be drained, the system to be flushed, or the engine coolant to be replaced. • DO NOT MIX different colors or types of coolant in your vehicle. Make sure the correct coolant is used. Mixing of engine coolants may harm your engine’s cooling system. The use of an improper coolant may harm engine and cooling system components and may void the warranty.
• A large amount of water without engine coolant may be added , in
case of emergency, to reach a vehicle service location. In this instance, the cooling system must be drained, chemically cleaned with Motorcraft® Premium Cooling System Flush, and refilled with prediluted engine coolant as soon as possible. Water alone (without engine coolant) can cause engine damage from corrosion, overheating or freezing.
2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012
USA (fus)Maintenance
245
• Do not use alcohol, methanol, brine or any engine coolants mixed with alcohol or methanol antifreeze (coolant). Alcohol and other liquids can cause engine damage from overheating or freezing. • Do not add extra inhibitors or additives to the coolant. These can beharmful and compromise the corrosion protection of the engine coolant.
Unscrew the cap slowly. Any pressure will escape as you unscrew the cap. Add prediluted engine coolant meeting the Ford specification. See the technical specifications chart in theCapacities and Specifications chapter. Whenever coolant has been added, the coolant level in the coolant reservoir should be checked the next few times you drive the vehicle. If necessary, add enough prediluted engine coolant to bring the coolant level to the proper level.
Recycled Engine Coolant Ford Motor Company does NOT recommend the use of recycled engine coolant since a Ford-approved recycling process is not yet available.
Used engine coolant should be disposed of in an appropriate
manner. Follow your community’s regulations and standards for recycling and disposing of automotive fluids.
coolant concentration above 50%.
Severe Climates If you drive in extremely cold climates: • It may be necessary to have a Ford authorized dealer increase the • A coolant concentration of 60% will provide improved freeze point protection. Increased engine coolant concentrations above 60% will decrease the overheat protection characteristics of the engine coolant and may cause engine damage.
If you drive in extremely hot climates: • It may be necessary to have a Ford authorized dealer decrease the • A coolant concentration of 40% will provide improved overheat
coolant concentration to 40%.
protection. Decreased engine coolant concentrations below 40% will decrease the corrosion and freeze protection characteristics of the engine coolant and may cause engine damage.
2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012
USA (fus)246
Maintenance
Vehicles driven year-round in non-extreme climates should use prediluted engine coolant for optimum cooling system and engine protection.
What You Should Know About Fail-Safe Cooling If the engine coolant supply is depleted, this feature allows the vehicle to be driven temporarily before incremental component damage is incurred. The fail-safe distance depends on ambient temperatures, vehicle load and terrain. How Fail-Safe Cooling Works If the engine begins to overheat: • The engine coolant temperature gauge will move to the red (hot)
area.
• The service engine soon indicator will illuminate.
• The coolant temperature warning light will illuminate.
If the engine reaches a preset over-temperature condition, the engine will automatically switch to alternating cylinder operation. Each disabled cylinder acts as an air pump and cools the engine. When this occurs the vehicle will still operate. However: • The engine power will be limited. • The air conditioning system will be disabled. Continued operation will increase the engine temperature and the engine will completely shut down, causing steering and braking effort to increase. Once the engine temperature cools, the engine can be re-started. Take your vehicle to an authorized dealer as soon as possible to minimize engine damage.
2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012
USA (fus)Maintenance
247
When Fail-Safe Mode is Activated You have limited engine power when in the fail-safe mode, so drive the vehicle with caution. The vehicle will not be able to maintain high-speed operation and the engine will run rough. Remember that the engine is capable of completely shutting down automatically to prevent engine damage, therefore: 1. Pull off the road as soon as safely possible and turn off the engine. 2. Arrange for the vehicle to be taken to an authorized dealer. 3. If this is not possible, wait a short period for the engine to cool. 4. Check the coolant level and replenish if low.
WARNING: Fail-safe mode is for use during emergencies only. Operate the vehicle in fail-safe mode only as long as necessary to bring the vehicle to rest in a safe location and seek immediate repairs. When in fail-safe mode, the vehicle will have limited power, will not be able to maintain high-speed operation, and may completely shut down without warning, potentially losing engine power, power steering assist, and power brake assist, which may increase the possibility of a crash resulting in serious injury.
WARNING: Never remove the coolant reservoir cap while the engine is running or hot. The hot coolant is under pressure and
may cause serious burns.
5. Re-start the engine and take your vehicle to an authorized dealer. Note: Driving the vehicle without repairing the engine problem increases the chance of engine damage. Take your vehicle to an authorized dealer as soon as possible.
2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012
USA (fus)248
Maintenance
TRANSMISSION FLUID CHECK
Checking Automatic Transmission Fluid Note: Transmission fluid should be checked and, if required, added by an authorized dealer. The automatic transmission does not have a transmission fluid dipstick. See your Scheduled Maintenance Information for scheduled intervals for fluid checks and changes. Your transmission does not consume fluid. However, the fluid level should be checked if the transmission is not working properly, (i.e., if the transmission slips or shifts slowly) or if you notice some sign of fluid leakage. Do not use supplemental transmission fluid additives, treatments or cleaning agents. The use of these materials may affect transmission operation and result in damage to internal transmission components.
Checking and Adding Manual Transmission Fluid (if equipped)
1. Clean the filler plug. It is located on the passenger side of the transmission. 2. Remove the filler plug and inspect the fluid level.
3. For vehicles equipped with a V6 engine, the correct manual transmission fill level is at the lower edge of the filler hole. For vehicles equipped with a V8 engine, the correct manual transmission fill level is 1/2 in (1.3 cm) below the edge of the filler hole. 4. Add enough fluid through the filler opening to bring the fluid up to the recommended levels. 5. Install and tighten the fill plug securely. Use only fluid that meets Ford specifications. See the technical specifications chart in the Capacities and Specifications chapter.
2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012
USA (fus)Maintenance
249
BRAKE AND CLUTCH FLUID CHECK Brake and clutch (if equipped) systems are supplied from the same reservoir. Fluid levels between the MIN and MAX lines are within the normal operating range; there is no need to add fluid. If the fluid levels are outside of the normal operating range, the performance of the system could be compromised; seek service from your authorized dealer immediately.
POWER STEERING FLUID CHECK Your vehicle is equipped with an electric power steering (EPS) system. There is no fluid reservoir to check or fill.
FUEL FILTER Your vehicle is equipped with a lifetime fuel filter that is integrated with the fuel tank. Regular maintenance or replacement is not needed. For Shelby fuel filter requirements, see the Shelby GT500 Supplement.
WASHER FLUID CHECK
WARNING: If you operate your vehicle in temperatures below 40°F (5°C), use washer fluid with antifreeze protection. Failure
to use washer fluid with antifreeze protection in cold weather could result in impaired windshield vision and increase the risk of injury or accident.
Add fluid to fill the reservoir if the level is low. Only use a washer fluid that meets Ford specifications. See the technical specifications chart in the Capacities and Specifications chapter. State or local regulations on volatile organic compounds may restrict the use of methanol, a common windshield washer antifreeze additive. Washer fluids containing non-methanol antifreeze agents should be used only if they provide cold weather protection without damaging the vehicle’s paint finish, wiper blades or washer system.
2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012
USA (fus)250
Maintenance
CHANGING THE VEHICLE BATTERY
WARNING: Batteries normally produce explosive gases which can cause personal injury. Therefore, do not allow flames, sparks or lighted substances to come near the battery. When working near the battery, always shield your face and protect your eyes. Always provide proper ventilation.
WARNING: When lifting a plastic-cased battery, excessive pressure on the end walls could cause acid to flow through the
vent caps, resulting in personal injury and damage to the vehicle or battery. Lift the battery with a battery carrier or with your hands on opposite corners.
WARNING: Keep batteries out of reach of children. Batteries contain sulfuric acid. Avoid contact with skin, eyes or clothing.
Shield your eyes when working near the battery to protect against possible splashing of acid solution. In case of acid contact with skin or eyes, flush immediately with water for a minimum of 15 minutes and get prompt medical attention. If acid is swallowed, call a physician immediately.
WARNING: Battery posts, terminals and related accessories contain lead and lead compounds. Wash hands after handling.
Your vehicle is equipped with a Motorcraft® maintenance-free battery which normally does not require additional water during its life of service. Note: If your battery has a cover or a shield, make sure it is reinstalled after the battery has been cleaned or replaced. For longer, trouble-free operation, keep the top of the battery clean and dry. Also, make certain the battery cables are always tightly fastened to the battery terminals. If you see any corrosion on the battery or terminals, remove the cables from the terminals and clean with a wire brush. You can neutralize the acid with a solution of baking soda and water. It is recommended that the negative battery cable terminal be disconnected from the battery if you plan to store your vehicle for an extended period of time.
2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012
USA (fus)Maintenance
251
Battery Relearn Because your vehicle’s engine is electronically controlled by a computer, some control conditions are maintained by power from the battery. When the battery is disconnected or a new battery is installed, the engine must relearn its idle and fuel trim strategy for optimum driveability and performance. To begin this process: 1. With the vehicle at a complete stop, set the parking brake. 2. Put the gearshift in position P (automatic transmission) or the neutral position (manual transmission), turn off all accessories and start the engine. 3. Run the engine until it reaches normal operating temperature. 4. Allow the engine to idle for at least one minute. 5. Turn the A/C on and allow the engine to idle for at least one minute. 6. Drive the vehicle to complete the relearning process. • The vehicle may need to be driven 10 mi (16 km) or more to relearn • Note: If you do not allow the engine to relearn its idle trim, the idle quality of your vehicle may be adversely affected until the idle trim is eventually relearned.
the idle and fuel trim strategy.
When the battery is disconnected or a new battery installed, the transmission must relearn its adaptive strategy. As a result of this, the transmission may shift firmly. This operation is considered normal and will not affect function or durability of the transmission. Over time the adaptive learning process will fully update transmission operation to its optimum shift feel. If the battery has been disconnected or a new battery has been installed, the clock and the preset radio stations must be reset once the battery is reconnected. Always dispose of automotive batteries in a responsible manner. Follow your local authorized standards for disposal. Call your local authorized recycling center to find out more about recycling automotive batteries.
2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012
USA (fus)252
Maintenance
CHECKING THE WIPER BLADES
Run the tip of your fingers over the edge of the blade to check for roughness. Clean the wiper blades with washer fluid or water applied with a soft sponge or cloth.
CHANGING THE WIPER BLADES
1. Pull the wiper blade and arm away from the glass. 2. Squeeze the locking tabs to release the blade from the arm and pull the blade away from the arm to remove it. 3. Attach the new blade to the arm and snap it into place. Replace wiper blades at least once per year for optimum performance. Poor wiper quality can be improved by cleaning the wiper blades and the windshield. To prolong the life of the wiper blades, it is highly recommended to scrape off the ice on the windshield
before turning on the wipers. The layer of ice has many sharp edges and can damage the micro edge of the wiper rubber element. AIR FILTER CHECK
WARNING: To reduce the risk of vehicle damage and or personal burn injuries, do not start your engine with the air cleaner removed and do not remove it while the engine is running. Note: Failure to use the correct air filter element may result in severe engine damage. The customer warranty may be void for any damage to the engine if the correct air filter element is not used. When changing the air filter element, use only the air filter element listed. See Motorcraft® Part Numbers in the Capacities and Specifications chapter.
2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012
USA (fus)Maintenance
253
See Scheduled Maintenance Information for the appropriate intervals for changing the air filter element. Note: Failure to use the correct air filter element may result in severe engine damage. The customer warranty may be void for any damage to the engine if the correct air filter element is not used.
V6 engine
V8 engine
1. Release the clamps that secure the air filter housing cover. 2. Remove the air filter element from the air filter housing. 3. Wipe the air filter housing and cover clean to remove any dirt or debris and to ensure good sealing. 4. Install a new air filter element. Be careful not to crimp the filter element edges between the air filter housing and cover. This could cause filter damage and allow unfiltered air to enter the engine if not properly seated. 5. Replace the air filter housing cover and secure the clamps. Be sure that the air cleaner cover tabs are engaged into the slots of the air cleaner housing. ADJUSTING THE HEADLAMPS The headlamps on your vehicle are properly aimed at the assembly plant. If your vehicle has been in an accident, the alignment of your headlamps should be checked by your authorized dealer.
2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012
USA (fus)254
Maintenance
ground
Vertical Aim Adjustment 1. Park the vehicle directly in front of a wall or screen on a level surface, approximately 25 ft (7.6 m) away.
• (1) 8 ft (2.4 m) • (2) Center height of lamp to • (3) 25 ft (7.6 m) • (4) Horizontal reference line 2. Measure the height from the center of your headlamp to the ground and mark an 8 ft (2.4 m) horizontal reference line on the vertical wall or screen at this height (a piece of masking tape works well). The center of the lamp is marked by a 3 millimeter circle on the headlamp lens. 3. Turn on the low beam headlamps to illuminate the wall or screen and open the hood. To see a clearer light pattern for adjusting, block the light from one headlamp while adjusting the other.
On the wall or screen, you will observe a flat zone of high intensity light located at the top of the right hand portion of the beam pattern. If the top edge of the high intensity light zone is not at the horizontal reference line, the headlamp will need to be adjusted. 4. Locate the vertical adjuster on each headlamp.
2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012
USA (fus)Maintenance
255
5. Then use a 7 mm Allen wrench or a Phillips screwdriver to adjust the vertical aim of the headlamp. HORIZONTAL AIM IS NOT REQUIRED FOR THIS VEHICLE AND IS NON-ADJUSTABLE. 6. Close the hood and turn off the lamps.
CHANGING A BULB
Lamp Assembly Condensation Exterior lamps are vented to accommodate normal changes in pressure. Condensation can be a natural by-product of this design. When moist air enters the lamp assembly through the vents, there is a possibility that condensation can occur when the temperature is cold. When normal condensation occurs, a thin film of mist can form on the interior of the lens. The thin mist eventually clears and exits through the vents during normal operation. Clearing time may take as long as 48 hours under dry weather conditions. These are examples of acceptable condensation: • Presence of thin mist (no streaks, drip marks or droplets). • Fine mist covers less than 50% of the lens. These are examples of unacceptable moisture (usually caused by a lamp water leak): • Water puddle inside the lamp. • Large water droplets, drip marks or streaks present on the interior of
the lens.
Take your vehicle to a dealer for service if any of the above conditions of unacceptable moisture are present.
Replacing HID Headlamp Bulbs The headlamps on your vehicle use a high intensity discharge source. These lamps operate at a high voltage. When the bulb is burned out, the bulb and starter capsule assembly must be replaced by your authorized dealer. Replacing Front Parking Lamp/Turn Signal Bulbs 1. Make sure the headlamp control is in the off position and open the hood. 2. Remove the hex head screws attaching the beauty shield at the top, forward edge of the engine compartment just aft of the headlamps. 3. Remove the beauty shield to gain access to the front parking lamp and turn signal assembly.
2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012
USA (fus)256
Maintenance
4. Rotate the socket counterclockwise and remove from the lamp assembly.
5. Carefully pull the bulb straight out of socket. Install the new bulb in reverse order. Replacing Front Sidemarker Bulb 1. Make sure the headlamp control is in the off position.
2. Remove the hex head screws attaching the underbody forward aeroshield. 3. Remove the underbody forward aeroshield to gain access to the front sidemarker assembly.
4. Rotate the socket counterclockwise and remove from the lamp assembly.
5. Carefully pull the bulb straight out of socket.
2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012
USA (fus)Maintenance
257
Replacing Fog Lamp Bulbs (V6) (if equipped) 1. Make sure the headlamp control is in the off position and open the hood.
2. Remove the hex head screws attaching the underbody forward aeroshield. 3. Remove the underbody forward aeroshield to gain access to the fog lamp assembly. 4. Disconnect the electrical connector from the bulb by pulling it straight off.
5. Rotate the bulb counterclockwise and remove from the lamp assembly. Install the new bulb in reverse order. Replacing Fog Lamp Bulbs (GT) Your vehicle is equipped with LED fog lamp bulbs. It is designed to last the life of the vehicle. If replacement is required, it is recommended that you see your authorized dealer.
Replacing Tail Lamp/Brake/Rear Turn Signal Lamps Your vehicle is equipped with LED tail lamp, brake and rear turn signal lamps. It is designed to last the life of the vehicle. If replacement is required, it is recommended that you see your authorized dealer. Replacing Backup Bulbs Your vehicle is equipped with LED backup lamps. They are designed to last the life of the vehicle. If replacement is required, it is recommended that you see your authorized dealer.
2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012
USA (fus)258
Maintenance
Replacing Rear Sidemarker Lamp Bulbs 1. Make sure the headlamp switch is in the off position and locate the sidemarker on the rear bumper fascia. 2. Insert a flathead screwdriver between the rear of the sidemarker lens and the bumper fascia. 3. Push the screwdriver to the front of the vehicle and then slide it towards you to pop out the lamp assembly.
4. Carefully pull the bulb straight out of socket. Install the new bulb in reverse order.
Replacing License Plate Lamp Bulbs 1. Make sure the headlamp switch is in the off position.
2. Remove the 2 screws and the lens from the license plate lamp assembly.
3. Carefully pull the bulb straight out from the lamp assembly. Install the new bulb(s) in reverse order.
2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012
USA (fus)Maintenance
259
BULB SPECIFICATION CHART Replacement bulbs are specified in the chart below. Headlamp bulbs must be marked with an authorized D.O.T. for North America and an E for Europe to ensure lamp performance, light brightness and pattern and safe visibility. The correct bulbs will not damage the lamp assembly or void the lamp assembly warranty and will provide quality bulb burn time. Function * HID (high intensity discharge) headlamp Front park/turn lamp Sidemarker (front/rear)
7444NA (amber)
Trade Number
D3S
194
Fog lamp
LED (GT) H11 (V6)
LED * Tail lamp, brake lamp, turn lamp (LED) LED * High-mount stoplamp (LED) LED * Backup lamp C5WL License plate lamp 168
Dome/Map lamp All replacement bulbs are clear in color except where noted. To replace all instrument panel lights - see your authorized dealer. * To replace these lamps - see your authorized dealer.2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012
USA (fus)260
Vehicle Care
GENERAL INFORMATION Your Ford or Lincoln authorized dealer has many quality products available to clean your vehicle and protect its finishes.
CLEANING PRODUCTS For best results, use the following products or products of equivalent quality: Motorcraft® Bug and Tar Remover (ZC-42) Motorcraft® Custom Bright Metal Cleaner (ZC-15) Motorcraft® Detail Wash (ZC-3-A) Motorcraft® Dusting Cloth (ZC-24) Motorcraft® Engine Shampoo and Degreaser (U.S. only) (ZC-20) Motorcraft® Engine Shampoo (Canada only) (CXC-66-A) Motorcraft® Multi-Purpose Cleaner (Canada only) (CXC-101) Motorcraft® Premium Glass Cleaner (Canada only) (CXC-100) Motorcraft® Premium Quality Windshield Washer Fluid (Canada only) [CXC-37-(A, B, D or F)] Motorcraft® Premium Windshield Washer Concentrate (U.S. only) (ZC-32-A) Motorcraft® Professional Strength Carpet & Upholstery Cleaner (ZC-54) Motorcraft® Spot and Stain Remover (U.S. only) (ZC-14) Motorcraft® Ultra-Clear Spray Glass Cleaner (ZC-23) Motorcraft® Vinyl Cleaner (Canada only) (CXC-93) Motorcraft® Wheel and Tire Cleaner (ZC-37-A)
CLEANING THE EXTERIOR Wash your vehicle regularly with cool or lukewarm water and a neutral pH shampoo, such as Motorcraft® Detail Wash. • Never use strong household detergents or soap, such as dish washing
or laundry liquid. These products can discolor and spot painted surfaces.
• Never wash a vehicle that is hot to the touch or during exposure to • Dry the vehicle with a chamois or soft terry cloth towel in order to
strong, direct sunlight.
eliminate water spotting.
2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012
USA (fus)Vehicle Care
261
• Immediately remove items such as gasoline, diesel fuel, bird droppings and insect deposits because they can cause damage to the vehicle’s paintwork and trim over time. Use Motorcraft® Bug and Tar Remover. • Note: Suntan lotions and insect repellents can damage any paintedsurface; if these substances come in contact with your vehicle, wash it off as soon as possible.
• Remove any exterior accessories before entering a car wash. Exterior Chrome Note: Never use abrasive materials such as steel wool or plastic pads as they can scratch the chrome surface. Note: Do not use chrome cleaner, metal cleaner or polish on wheels and wheel covers. • Wash the vehicle first, using cool or lukewarm water and a neutral pH • Use Motorcraft® Custom Bright Metal Cleaner. Apply the product as you would a wax to clean bumpers and other chrome parts; allow the cleaner to dry for a few minutes, then wipe off the haze with a clean, dry rag.
shampoo, such as Motorcraft® Detail Wash.
• Do not apply cleaning product to hot surfaces and do not leave
cleaning product on chrome surfaces for a period of time exceeding that which is recommended. • Note: Using other non-recommended cleaners can result in severe
and permanent cosmetic damage.
Underbody Flush the complete underside of your vehicle frequently. Keep body and door drain holes free from packed dirt.
Cleaning Plastic Exterior Parts Use only approved products to clean plastic parts. • For routine cleaning, use Motorcraft® Detail Wash. • If tar or grease spots are present, use Motorcraft® Bug and Tar
Remover.
2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012
USA (fus)262
Vehicle Care
Convertible Top and Padded Molding For vinyl tops, wash with Motorcraft® Detail Wash. For cloth tops, wash with a high quality convertible top cleaner and protectant. • Do not use stiff bristle brushes or abrasive materials or cleaners. • Hot waxes applied by commercial car washes can affect the • Using high water pressure or wand-type car washes against the
cleanability of vinyl material.
convertible top and windows may cause water leaks and possible seal damage.
WAXING • Wash the vehicle first. • Use a quality wax that does not contain abrasives. • Do not allow paint sealant to come in contact with any non-body (low-gloss black) colored trim, such as grained door handles, roof racks, bumpers, side moldings, mirror housings or the windshield cowl area. The paint sealant will grey or stain the parts over time.
spots, road salt and industrial fallout, before repairing paint chips.
REPAIRING MINOR PAINT DAMAGE Your authorized dealer has touch-up paint to match your vehicle’s color. Take your color code (printed on a sticker in the driver’s door jamb) to your authorized dealer to make sure you get the correct color. • Remove particles, such as bird droppings, tree sap, insect deposits, tar • Always read the instructions before using the products. CLEANING THE ENGINE Engines are more efficient when they are clean because grease and dirt buildup keep the engine warmer than normal. When washing: • Take care when using a power washer to clean the engine. The high-pressure fluid could penetrate the sealed parts and cause damage. • Do not spray a hot engine with cold water to avoid cracking the • Spray Motorcraft® Engine Shampoo and Degreaser on all parts that
engine block or other engine components.
require cleaning and pressure rinse clean. In Canada, use Motorcraft® Engine Shampoo.
2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012
USA (fus)Vehicle Care
running engine may cause internal damage.
263
• Never wash or rinse the engine while it is hot or running; water in the • Never wash or rinse any ignition coil, spark plug wire or spark plug • Cover the battery, power distribution box, and air filter assembly towell, or the area in and around these locations.
prevent water damage when cleaning the engine.
CLEANING THE WINDOWS AND WIPER BLADES The windows and wiper blades should be cleaned regularly. If the wipers do not wipe properly, substances on the vehicle’s glass or the wiper blades may be the cause. These may include hot wax treatments used by commercial car washes, water repellent coatings, tree sap, or other organic contamination; these contaminants may cause squeaking or chatter noise from the blades, and streaking and smearing of the windshield. To clean these items, follow these tips: • The windows may be cleaned with a non-abrasive cleaner such as • The wiper blades can be cleaned with isopropyl (rubbing) alcohol or Motorcraft® Premium Windshield Washer Concentrate in the U.S., or Premium Quality Windshield Washer Fluid in Canada. Be sure to replace wiper blades when they appear worn or do not function properly.
Motorcraft® Ultra-Clear Spray Glass Cleaner.
• Do not use abrasives, as they may cause scratches. • Do not use fuel, kerosene, or paint thinner to clean any parts. If you cannot remove those streaks after cleaning with the glass cleaner or if the wipers chatter and move in a jerky motion, clean the outer surface of the windshield and the wiper blades using a sponge or soft cloth with a neutral detergent or mild-abrasive cleaning solution. After cleaning, rinse the windshield and wiper blades with clean water. The windshield is clean if beads do not form when you rinse the windshield with water.
2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012
USA (fus)264
Vehicle Care
CLEANING THE INTERIOR
WARNING: Do not use cleaning solvents, bleach or dye on the vehicle’s safety belts, as these actions may weaken the belt
webbing.
WARNING: On vehicles equipped with seat-mounted airbags, do not use chemical solvents or strong detergents. Such products
could contaminate the side airbag system and affect performance of the side airbag in a crash.
For fabric, carpets, cloth seats, safety belts and seats equipped with side airbags: • Remove dust and loose dirt with a vacuum cleaner. • Remove light stains and soil with Motorcraft® Professional Strength • If grease or tar is present on the material, spot-clean the area first
Carpet & Upholstery Cleaner.
with Motorcraft® Spot and Stain Remover. In Canada, use Motorcraft® Multi-Purpose Cleaner.
immediately (but do not oversaturate) or the ring will set.
• If a ring forms on the fabric after spot cleaning, clean the entire area • Do not use household cleaning products or glass cleaners, which can stain and discolor the fabric and affect the flame retardant abilities of the seat materials.
CLEANING THE INSTRUMENT PANEL AND INSTRUMENT CLUSTER LENS
WARNING: Do not use chemical solvents or strong detergents when cleaning the steering wheel or instrument panel to avoid
contamination of the airbag system.
Clean the instrument panel and cluster lens with a clean, damp, white, cotton cloth, then use a clean and dry, white, cotton cloth to dry these areas. • Avoid cleaners or polishes that increase the gloss of the upper portion of the instrument panel. The dull finish in this area helps protect the driver from undesirable windshield reflection.
2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012
USA (fus)Vehicle Care
265
• Be certain to wash or wipe your hands clean if you have been in contact with certain products, such as insect repellent and suntan lotion, in order to avoid possible damage to the interior painted surfaces. • Do not use household or glass cleaners as these may damage the • Do not allow air fresheners and hand sanitizers to spill on interior surfaces. If a spill occurs, wipe off immediately. Damage may not be covered by your warranty.
finish of the instrument panel, interior trim and cluster lens.
If a staining liquid like coffee or juice has been spilled on the instrument panel or on interior trim surfaces, clean as follows: 1. Wipe up spilled liquid using a clean, white, cotton cloth. 2. Wipe the surface with a damp, clean, white, cotton cloth. For more thorough cleaning, use a mild soap and water solution. If the spot cannot be completely cleaned by this method, the area may be cleaned using a commercially available cleaning product designed for automotive interiors. 3. If necessary, apply more soap and water solution or cleaning product to a clean, white, cotton cloth and press the cloth onto the soiled area; allow this to set at room temperature for 30 minutes. 4. Remove the soaked cloth, and if it is not soiled badly, use this cloth to clean the area by using a rubbing motion for 60 seconds. 5. Following this, wipe area dry with a clean, white, cotton cloth.
CLEANING LEATHER SEATS (IF EQUIPPED) • Remove dust and loose dirt with a vacuum cleaner. • Clean spills and stains as quickly as possible. • For routine cleaning, wipe the surface with a soft, damp cloth. For
more thorough cleaning, wipe the surface with a mild soap and water solution. In Canada, use Motorcraft® Vinyl Cleaner. Dry the area with a soft cloth.
• If the leather cannot be completely cleaned using a mild soap and water solution, the leather may be cleaned using a commercially available leather cleaning product designed for automotive interiors. • To check for compatibility, first test any cleaner or stain remover on • Do not use household cleaning products, alcohol solutions, solvents or cleaners intended for rubber, vinyl and plastics or petroleum-based leather conditioners. These products may cause premature wearing or damage to the leather.
an inconspicuous part of the leather.
2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012
USA (fus)266
Vehicle Care
covers.
CLEANING THE ALLOY WHEELS Note: Do not use chrome cleaner, metal cleaner or polish on wheels and wheel covers. Aluminum wheels and wheel covers are coated with a clearcoat paint finish. In order to maintain their shine: • Clean weekly with Motorcraft® Wheel and Tire Cleaner. Heavy dirt and brake dust accumulation may require agitation with a sponge. Rinse thoroughly with a strong stream of water. • Never apply any cleaning chemical to hot or warm wheel rims or • Some automatic car washes may cause damage to the finish on your wheel rims or covers. Industrial-strength (heavy-duty) cleaners, or cleaning chemicals, in combination with brush agitation to remove brake dust and dirt, could wear away the clearcoat finish over time.
cleaners, steel wool, fuels or strong household detergent.
• Do not use hydrofluoric acid-based or high caustic-based wheel • To remove tar and grease, use Motorcraft® Bug and Tar Remover. VEHICLE STORAGE If you plan on storing your vehicle for an extended period of time (30 days or more), read the following maintenance recommendations to make sure your vehicle stays in good operating condition. All motor vehicles and their components were engineered and tested for reliable, regular driving. Long-term storage under various conditions may lead to component degradation or failure unless specific precautions are taken to preserve the components. General • Store all vehicles in a dry, ventilated place. • Protect from sunlight, if possible. • If vehicles are stored outside, they require regular maintenance to
protect against rust and damage.
Body • Wash vehicle thoroughly to remove dirt, grease, oil, tar or mud from exterior surfaces, rear-wheel housing and underside of front fenders. • Periodically wash vehicles stored in exposed locations. • Touch up raw or primed metal to prevent rust.
2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012
USA (fus)Vehicle Care
267
• Cover chrome and stainless steel parts with a thick coat of auto wax
grade oil.
to prevent discoloration. Re-wax as necessary when the vehicle is washed.
• Lubricate hood latch, all door latches and trunk lid hinges with a light • Cover interior trim to prevent fading. • Keep all rubber parts free from oil and solvents. Engine • The engine oil and filter should be changed prior to storage, as used • Start the engine every 15 days. Run at fast idle until it reaches normal • With your foot on the brake, shift through all the gears while the
engine oil contains contaminates that may cause engine damage.
operating temperature.
engine is running.
Fuel system • Fill the fuel tank with high-quality fuel until the first automatic shutoff
of the fuel pump nozzle.
Note: During extended periods of vehicle storage (30 days or more), fuel may deteriorate due to oxidation. Add a quality gas stabilizer product to the vehicle fuel system whenever actual or expected storage periods exceed 30 days. Follow the instructions on the additive label. The vehicle should then be operated at idle speed to circulate the additive throughout the fuel system. Cooling system • Protect against freezing temperatures. • When removing vehicle from storage, check coolant fluid level. Confirm there are no cooling system leaks, and fluid is at the recommended level.
Battery • Check and recharge as necessary. Keep connections clean. • If storing your vehicle for more than 30 days without recharging the battery, it may be advisable to disconnect the battery cables to ensure battery charge is maintained for quick starting.
Note: If battery cables are disconnected, it will be necessary to reset memory features.
2014 05+ Mustang (197) Owners Guide gf, 1st Printing, November 2012
USA (fus)268
Vehicle Care
Brakes • Make sure brakes and parking brake are fully released. Tires • Maintain recommended air pressure. Miscellaneous • Make sure all linkages, cables, levers and pins under vehicle are • Move vehicles at least 25 feet (8 meters) every 15 days to lubricate
covered with grease to prevent rust.
working parts and prevent corrosion.
window surfaces.
during storage (mice/squirrel nests).
Removing Vehicle from Storage When your vehicle is ready to come out of storage, do the following: • Wash your vehicle to remove any dirt or grease film build-up on • Check windshield wipers for any deterioration. • Check under the hood for any foreign material that may have collected • Check the exhaust for any foreign material that may have collected • Check tire pressures and set tire inflation per the Tire Label. • Check brake pedal operation. Drive the vehicle 15 feet (4.5 meters) • Check fluid levels (including coolant, oil and gas) to make sure there • If the battery was removed, clean the battery cable ends and inspect. Contact your authorized dealer if you have any concerns or issues.
are no leaks and fluids are at recommended levels.
back and forth to remove rust build-up.
during storage.
