Download PDF Manual

The 2003 Chevrolet Impala Owner Manual


Seats and Restraint Systems


........................... ............................................... ............................................... ..............................................


Front Seats Rear Seats Safety Belts Child Restraints Air Bag Systems Restraint System Check Features and Controls


....................................... ...................................... ............................ ..................................... ........................................................ ....................................... ................................................. ............................


1-1 1-2 1-7 1-9 1-31 1-51 1-61 2-1 2-2 2-8 2-13 2-1 6 ........... 2-18 2-33 2-37 2-39 ......................................... 2-43 2-44 2-45 3-1 3-4 3-22 ......... 3-27 3-40 .................. 3-48


Keys Doors and Locks \AI* A*, vvinuuvtS Theft-Deterrent Systems Starting and Operating Your Vehicle Mirrors Onstar@ System HomeLink@ Transmitter Storage Areas Sunroof Vehicle Personalization


.................................................. ............................. Instrument Panel ............................................. .......................... ......................................


Instrument Panel Overview Climate Controls 1111 ^I_._I : - L L - n ---- - - A v v a l I lit ly i l y l ILS, uayes ar I U IIIUICALUIS Message Center Driver Information Center (DIC)


.................................................... ...................................... .............................


.......................................


1 - - 1 . - - 1 -


Trip Computer Audio System(s)


......................................... ....................................... Driving Y Q U ~ Vehicle .......................................


Vehicle


Your Driving, the Road, and Your Towing


................................................... Service and Appearance Care .......................... ..................................................... .........................................................


Service Fuel Checking Things Under


3-51 3-52 4-1 ..... 4-2 4-31 5-1 5-3 5-5


the Hood


............................................. ..................................... ....................................


...................................................... ..................................... ................................. ......................................


Head!amp Aiming Bulb Replacement Windshield Wiper Blade Replacement Tires Appearance Care Vehicle Identification Electrical System Capactties and Specltlcatlons Normal Maintenance Replacement


5-10 5-54 5-55 ......... 5-59 5-60 5-83 5-91 5-92 ................... 5-1 01 .... 5-103 6-1 6-2 7-1 .................. 7-2 7-8 Index ................................................................. 1


Maintenance Schedule ..................................... ................................ Customer Assistance Information ....................


Customer Assistance Information Reporting Safety Defects


Maintenance Schedule


............................


Parts


Canadian Owners


You can obtain a French copy of this manual from your dealer or from: Helm, Incorporated P.O. Box 07130 Detroit, MI 48207


How to Use This Manual


Many people read their owner’s manual from beginning to end when they first receive their new vehicle. If you do this, it will help you learn about the features and controls for your vehicle. In this manual, you’ll find that pictures and words work together to explain things.


Index


A good place to look for what you need is the Index in back of the manual. It’s an alphabetical list of what’s in the manual, and the page number where you’ll find it.


GENERAL MOTORS, GM, the GM Emblem, CHEVROLET, the CHEVROLET Emblem and the name IMPALA are registered trademarks of General Motors Corporation. This manual includes the latest information at the time it was printed. We reserve the right to make changes after that time without further notice. For vehicles first sold in Canada, substitute the name “General Motors of Canada Limited” for Chevrolet Motor Division whenever it appears in this manual. Please keep this manual in your vehicle, so it will be there if you ever need it when you’re on the road. If you sell the vehicle, please leave this manual in it so the new owner can use it.


Litho in U.S.A. Part No. 10325249 A First Edition


@Copyright General Motors Corporation 06/19/02 All Rights Reserved


Safety Warnings and Symbols


You will find a number of safety cautions in this book. We use a box and the word CAUTION to tell you about things that could hurt you if you were to ignore the warning.


I These meal. -.lere is sorr---hin- that c--,- h u ~


you or other people.


In the caution area, we tell you what the hazard is. Then we tell you what to do to help avoid or reduce the hazard. Please read these cautions. If you don’t, you or others could be hurt.


You will also find a circle with a slash through it in this book. This safety symbol means “Don’t,’’ “Don’t do this” or “Don’t let this happen.”


... II‘


Vehicle Damage Warnings Also, in this book you will find these notices: Notice: These mean there is something that could damage your vehicle. A notice will tell you about something that can damage your vehicle. Many times, this damage would not be covered by your warranty, and it could be costly. But the notice will tell you what to do to help avoid the damage. When you read other manuals, you might see CAUTION and NOTICE warnings in different colors or in different words. You’ll also see warning labels on your vehicle. They use the same words, CAUTION or NOTICE.


Vehicle Symbols Your vehicle has components and labels that use symbols instead of text. Symbols, used on your vehicle, are shown along with the text describing the operation or information relating to a specific component, control, message, gage or indicator. If you need help figuring out a specific name of a component, gage or indicator reference the following topics in the Index:


Seats and Restraint Systems Features and Controls Instrument Panel Overview Climate Controls Warning Lights, Gages and Indicators


B Audio Systems


Engine Compartment Overview


iv


v


Seats and Restraint Systems


Front Seats ...............................................


1.2 Manual Seats ................................................ 1-2 ..................................... 1-3 Six-Way Power Seats Manual Lumbar .............................................. 1-3 Heated Seats ................................................. 1-4 Reclining Seatbacks ........................................ 1-4 Head Restraints ............................................. 1-6 Rear Seats ....................................................... 1-7 Split Folding Rear Seat ................................... 1-7


Safety Belts ..................................................... 1.9 Safety Belts: They Are for Everyone ................. 1-9 Questions and Answers About Safety Beits ...... i -1 3 How to Wear Safety Belts Properly ................. 1-1 4 Driver Position .............................................. 1-1 5 Safety Belt Use During Pregnancy .................. 1.22 Right Front Passenger Position ....................... 1-23 Center Front Passenger Position .................... -1 -23 Rear Seat Passengers .................................. 1-25 Hear Satety Belt Comtort Guides


tor Children


and Small Adults ....................................... 1-28 Safety Belt Extender ..................................... 1-30 Child Restraints ............................................. 1-31 Older Children .............................................. 1-31 lnfants and Yomg Children ............................ 1 - 3 3


Child Restraint Systems ................................. 1.37 Where to Put the Restraint ............................. 1-40 Top Strap .................................................... 1-41 1-42 Top Strap Anchor Location ............................. Lower Anchorages and Top Tethers for


Children (LATCH System) ........................... 1-43


Securing a Child Restraint Designed for the


LATCH System ......................................... 1-45


Securing a Child Restraint in a Rear Seat


Position ................................................... 1-45


Securing a Child Restraint in the Right Front


Seat Position ............................................ 1-48 Air Bag Systems ............................................ 1-51 Where Are the Air Bags? ............................... 1-54 When Should an Air Bag Inflate? .................... 1-56 Inflate? ..................... 1-57 What Makes an Air Bag How Does an Air Bag Restrain? ..................... 1-57 What Will You See After an Air


D,, way 1 1 I t l a t t a :


............................................


4 c o 1 -JW Servicing Your Air Bag-Equipped Vehicle ......... 1-60 Restraint System Check .................................. 1-61 Checking Your Restraint Systems ................... 1-61 Replacing Restraint System Parts After


i-gl-+-nq


a Crash ................................................... 1-62


Front Seats


Manual Seats


You can lose control of the vehicle if you try to adjust a manual driver’s seat while the vehicle is moving. The sudden movement could startle and confuse you, or make you push a pedal when you don’t want to. Adjust the driver’s seat only when the vehicle is not moving.


1 -2


If your vehicle has the manual seat, lift the bar located under the front of the seat to unlock it. Slide the seat to where you want it and release the bar. Try to move the seat back and forth to be sure the seat is locked in place.


0 Raise or lower the front portion of the seat cushion


by sliding the front of the control up or down. Raise or lower the rear portion of the seat cushion by sliding the rear of the control up or down.


Manual Lumbar


If your vehicle has this feature, the control is located on the outboard side of the front seats toward the front of the seat cushion. To adjust the seat do any of the following:


Move the seat forward or rearward by sliding the control to the front or the rear. Raise or lower the seat by sliding the control up or down.


If your vehicle has this feature, the knob is located on the outboard side of the driver’s seat. Turn the knob toward the front of the vehicle to increase lumbar support. Turn the knob toward the rear of the vehicle to decrease lumbar support.


1-3


Heated Seats


Reclining Seatbacks


If your vehicle has this option, both the driver's and passenger's heated seat switches are located on the outboard sides of the seats near the front. Press LO to warm the seat to a lower temperature. Press HI to warm the seat to a higher temperature. To turn this feature off, move the switch to the center position.


Lift the lever to release the seatback, then move the seatback to where you want it. Release the lever to lock the seatback in place. Pull up on the lever without pushing on the seatback and the seatback will move forward.


I -4


But don’t have a seatback reclined if your vehicle is moving.


Sitting in a reclined position when your vehicle is in motion can be dangerous. Even if you buckle up, your safety belts can’t do their job when you’re reclined like this. The shoulder belt can’t do its job. In a crash, you could go into it, receiving neck or other injuries. The lap belt can’t do its job either. In a crash the belt could go up over your abdomen. The k i t forces woerEd be there, not at your pelvic bones. This could cause serious internal injuries. For proper protection when the vehicle is in motion, have the seatback upright. Then sit well back in the seat and wear your safety belt properiy.


1 -5


Head Restraints


Adjust your head restraint so that the top of the restraint is closest to the top of your head. This position reduces the chance of a neck injury in a crash.


1 -6


Rear Seats


Split Folding Rear Seat If your vehicle has this feature you can fold either side of the seatback down in your vehicle for more cargo space. Make sure the front seat isn’t reclined. If it is, the rear seatback won’t fold down all the way. To lower the rear seatback, follow these steps:


1. Remove the rear


center lap-shoulder belt latch by pressing the release button.


2. Pull forward on the seat tab located on the outboard side of the seatback cushion and fold the seatback down.


3. This wi!! a!!ow you direct accsss to the trunk.


1 -7


To raise the rear seatback, follow these steps:


1. Raise the seatback up and make sure it latches.


Push and pull on the seatback to be sure it is locked in position.


2. Reconnect the center safety belt latch plate to the buckle.


A safety belt that is improperly routed, not properly attached, or twisted won’t provide the protection needed in a crash. The person wearing the belt could be seriously injured.


CAUTION:


(Continued)


1 -8


(Con-..rued)


After raising the rear seatback, always check to be sure that the safety belts are properly routed and attached, and are not twisted.


Make sure the safety belt label is pointing to the release button, and that both are facing the front of the vehicle. Make sure the belt is not twisted. Push and pull on the latch plate to be sure it is secure.


If the seatback isr. - lockec-, .t c J d move forward in a sudden stop or crash. That could cause injury to the person sitting there. Always press rearward on the seatback to be sure it is locked.


When the seat is not in use, it should be kept in the upright locked position.


Safety Belts


Safety Belts: They Are for Everyone


This part of the manual tells you how to use safety belts properly. It also tells you some things you should not do with safety belts.


Don’t let anyone ride where he or she can’t wear a safety belt properly. If you are in a crash and you’re not wearing a safety belt, your injuries can be much worse. You can hit things inside the vehicle or be ejected from it. You can be seriously injured or killed. In the same crash, you might not be, if you are buckled up. Always fasten your safety belt, and Check that your passengers’ belts are fastened properly too.


in a cargo


It is extremely dangerous to ,,e area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. Do not allow people to ride in any area of your vehicle that is not equipped with seats and safety belts. Be sure everyone in your vehicle is in a seat and using a safety belt properly.


1-9


Your vehicle has a light that comes on as a reminder to buckle up. See Safety Belt Reminder Light on page 3-31.


Why Safety Belts Work When you ride in or on anything, you go as fast as it goes.


In most states and in all Canadian provinces, the law says to wear safety belts. Here’s why: They work. You never know if you’ll be in a crash. If you do have a crash, you don’t know if it will be a bad one. A few crashes are mild, and some crashes can be so serious that even buckled up, a person wouldn’t survive. But most crashes are in between. In many of them, people who buckle up can survive and sometimes walk away. Without belts they could have been badly hurt or killed. After more than 30 years of safety belts in vehicles, the facts are clear. In most crashes buckling up does matter ... a lot!


Take the simplest vehicle. Suppose it’s just a seat on wheels.


Put someone on it.


Get it up to speed. Then stop the vehicle. The rider doesn’t stop.


1-1 1


The person keeps going until stopped by something. In a real vehicle, it could be the windshield ...


or the instrument panel ...


1-12


Questions and Answers About Safety Belts


Q: Won’t I be trapped in the vehicle after an


accident if I’m wearing a safety belt?


A: You could be - whether you’re wearing a safety belt or not. But you can unbuckle a safety belt, even if you’re upside down. And your chance of being conscious during and after an accident, so you can unbuckle and get out, is much greater if you are belted.


Q: If my vehicle has air bags, why should I have to


wear safety belts?


A: Air bags are in many vehicles today and will be in


most of them in the future. But they are cypp!emgn?z,! swstems en!;/; se ?he\/ wnrk with .-’-.. safety belts - not instead of them. Every air bag system ever offered for sale has required the use of safety belts. Even if you’re in a vehicle that has air bags, you still have to buckle up to get the most protection. That’s true not only in frontal collisions, but especially in side and other collisions.


3 - - - . . I


1-13


or the safety belts! With safety belts, you slow down as the vehicle does. Y5.2 set !??ere time tc step. Ye: step 2’.e!- !?-!ere distanss, and your strongest bones take the forces. That’s why safety belts make such good sense.


home, why should I wear safety belts?


Q: If I’m a good driver, and I never drive far from A: You may be an excellent driver, but if you’re in an accident - even one that isn’t your fault - you and your passengers can be hurt. Being a good driver doesn’t protect you from things beyond your control, such as bad drivers. Most accidents occur within 25 miles (40 km) of home. And the greatest number of serious injuries and deaths occur at speeds of less than 40 mph (65 km/h). Safety belts are for everyone.


How to Wear Safety Belts Properly This part is only for people of adult size. Be aware that there are special things to know about safety belts and children. And there are different rules for smaller children and babies. If a child will be riding in your vehicle, see Older Children on page 1-31 or lnfants and Young Children on page 1-33. Follow those rules for everyone’s protection. First, you’ll want to know which restraint systems your vehicle has. We’ll start with the driver position.


1-14


Driver Position This part describes the driver’s restraint system. Lap-Shoulder Belt The driver has a lap-shoulder belt. Here’s how to wear it properly. 1. Close and lock the door. 2. Adjust the seat so you can sit up straight. To see


how, see “Seats” in the Index.


3. Pick up the latch plate and pull the belt across you.


Don’t let it get twisted. The shoulder belt may lock if you pull the belt across you very quickly. If this happens, let the belt go back slightly to unlock it. Then pull the belt across you more slowly.


4. Push the latch plate into the buckle until it clicks.


Pull up on the latch plate to make sure it is secure. If the belt isn’t long enough, see Safety Belt Extender on page 1-30. Make sure the release button on the buckle is positioned so you would be able to unbuckle the safety belt quickly if you ever had to.


1-15


5. To make the lap part tight, pull down on the buckle end of the belt as you pull up on the shoulder belt.


The lap part of the belt should be worn low and snug on the hips, just touching the thighs. In a crash, this applies force to the strong pelvic bones. And you’d be less likely to slide under the lap belt. If you slid under it, the belt would apply force at your abdomen. This could cause serious or even fatal injuries. The shoulder belt should go over the shoulder and across the chest. These parts of the body are best able to take belt restraining forces. The safety belt locks if there’s a sudden stop or crash, or if you pull the belt very quickly out of the retractor.


Shoulder Belt Height Adjuster Before you begin to drive, move the shoulder belt adjuster to the height that is right for you.


To move it down, squeeze the release lever and the shoulder belt guide as shown and move the height adjuster to the desired position. You can move the adjuster up just by pushing up on the shoulder belt guide. After you move the adjuster to where you want it, try to move it down without squeezing the release lever to make sure it has locked into position. Adjust the height so that the shoulder portion of the belt is centered on your shoulder. The belt should be away from your face and neck, but not falling off your shoulder.


1-17


hurt if


You can be seriol is too loose. In a crash, you would move forward too much, which could increase injury. The shoulder belt should fit against your body.


ur shoulder belt


Q: What’s wrong with this?


A: The shoulder belt is too loose. It won’t give nearly


as much protection this way.


1-18


Q: What's wrong with this?


A: The belt is buckled in the wrong place.


You can be seriously injured if your belt is buckled in the wrong place like this. In a crash, the belt would go up over your abdomen. The belt forces would be there, not at the pelvic bones. This could cause serious internal injuries. Always buckle your belt into the buckle nearest you.


1-19


You can be seriously injured if you wear the shoulder belt under your arm. In a crash, your body would move too far forward, which would increase the chance of head and neck injury. Also, the belt would apply too much force to the ribs, which aren't as strong as shoulder bones. You could also severely injure internal organs like your liver or spleen.


Q: What's wrong with this?


A: The shoulder belt is worn under the arm. It should


be worn over the shoulder at all times.


1-20


Q: What’s wrong with this?


You can be seriously injured by a twisted belt. In a crash, you wouldn’t have the full width of the belt to spread impact forces. If a belt is twisted, make it straight so it can work properly, or ask your dealer to fix it.


A: The belt is twisted across the body.


1-21


Safety Belt Use During Pregnancy


Safety belts work for everyone, including pregnant women. Like all occupants, they are more likely to be seriously injured if they don’t wear safety belts.


To unlatch the belt, just push the button on the buckle. The belt should go back out of the way. Before you close the door, be sure the belt is out of the way. If you slam the door on it, you can damage both the belt and your vehicle.


1-22


A pregnant woman should wear a lap-shoulder belt, and the lap portion should be worn as low as possible, below the rounding, throughout the pregnancy.


The best way to protect the fetus is to protect the mother. When a safety belt is worn properly, it’s more likely that the fetus won’t be hurt in a crash. For pregnant women, as for anyone, the key to making safety belts effective is wearing them properly.


Right Front Passenger Position


To learn how to wear the right front passenger’s safety belt properly, see Driver Position on page 1-15. The right front passenger’s safety belt works the same way as the driver’s safety belt - except for one thing. If you ever pull the shoulder portion of the belt out all the way, pi; will engage the child restrair;: lozkhg feature. If this happens, just let the belt go back all the way and start again.


Center Front Passenger Position Lap Belt


If your vehicle has a front bench seat, someone can sit in the center position.


1-23


When you sit in the center front seating position, you have a lap safety belt, which has no retractor. To make the belt longer, tilt the latch plate and pull it along the belt.


To make the belt shorter, pull its free end as shown until the belt is snug. Buckle, position and release it the same way as the lap part of a lap-shoulder belt. If the belt isn't long enough, see Safety Belt Extender on page 1-30 Make sure the release button on the buckle is positioned so you would be able to unbuckle the safety belt quickly if you ever had to.


1-24


Rear Seat Passenger Positions


Rear Seat Passengers It’s very important for rear seat passengers to buckle up! Accident statistics show that unbelted people in the rear seat are hurt more often in crashes than those who are wearing safety belts. Rear passengers who aren’t safety belted can be thrown out of the vehicle in a crash. And they can strike others in the vehicle who are wearing safety belts.


Lap-Shoulder Belt All rear seating positions have lap-shoulder belts. Here’s how to wear one properly.


1-25


When the shoulder belt is pulled out all the way, it will lock. If it does, let it go back all the way and start again. If the belt is not long enough, see Safety Belt Extender on page 1-30. Make sure the release button on the buckle is positioned so that you would be able to unbuckle the safety belt quickly if you ever had to.


1.


2.


Pick up the latch plate and pull the belt across you. Don’t let it get twisted. The shoulder belt may lock if you pull the belt across you very quickly. If this happens, let the belt go back slightly to unlock it. Then pull the belt across you more slowly. Push the latch plate into the buckle until it clicks. Pull up on the latch plate to make sure it is secure.


1-26


3. To make the lap part tight, pull down on the buckle end of the belt as you pull up on the shoulder part.


You can be seriously hurt if your shoulder belt is too loose. In a crash, you would move forward too much, which could increase injury. The shoulder belt should fit against your body.


To unlatch the belt, just push the button on the buckle.


1-27


iZlp be;;.


The lap part of the belt should be worn low and snug on the hips, just touching the thighs. In a crash, this applies force to the strong pelvic bones. And you’d be under i;, Iess p [ . y . to g;xe ilrrder the belt would apply force at your abdomen. This could cause serious or even fatal injuries. The shoulder belt should go over the shoulder and across the chest. These parts of the body are best able to take belt restraining forces. The safety belt locks if there’s a sudden stop or a crash, or if you pull the belt very quickly out of the retractor.


; f yo^


Rear Safety Belt Comfort Guides for Children and Small Adults


Your vehicle may have this feature already. If it doesn’t, you can get it from any GM dealer. Rear shoulder belt comfort guides will provide added safety belt comfort for older children who have outgrown booster seats and for small adults. When installed on a shoulder belt, the comfort guide better positions the belt away from the neck and head. There is one comfort guide available for each outside passenger position in the rear seat. To provide added safety belt comfort for children who have outgrown child restraints and booster seats and for smaller adults, the comfort guides may be installed on the shoulder belts. Here’s how to install a comfort guide and use the safety belt:


1-28


1. Pull the elastic cord out from between the edge of the seatback and the interior body to remove the guide from its storage clip.


2. Slide the guide under and past the belt. The elastic cord must be under the belt. Then, place the guide over the belt, and insert the two edges of the belt into the slots of the guide.


3. Be sure that the belt is not twisted and it lies flat. The elastic cord must be under the belt and the guide on top.


1-29


Safety Belt Extender If the vehicle’s safety belt will fasten around you, you should use it. But if a safety belt isn’t long enough to fasten, your dealer will order you an extender. It’s free. When you go in to order it, take the heaviest coat you will wear, so the extender will be long enough for you. The extender will be just for you, and just for the seat in your vehicle that you choose. Don’t let someone else use it, and use it only for the seat it is made to fit. To wear it, just attach it to the regular safety belt.


4. Buckle, position and release the safety belt as


described in Rear Seat Passengers on page 7-25. Make sure that the shoulder belt crosses the shoulder.


To remove and store the comfort guides, squeeze the belt edges together so that you can take them out of the guides. Pull the guide upward to expose its storage clip, and then slide the guide into the clip. Turn the guide and clip inward and in between the seatback and the interior body, leaving only the loop of elastic cord exposed.


1-30


Child Restraints


Older Children


Q: What is the proper way to wear safety belts? A: If possible, an older child should wear a


lap-shoulder belt and get the additional restraint a shoulder belt can provide. The shoulder belt should not cross the face or neck. The lap belt should fit snugly below the hips, just touching the top of the thighs. It should never be worn over the abdomen, which could cause severe or even fatal internal injuries in a crash.


Accident statistics show that children are safer if they are restrained in the rear seat. In a crash, children who are not buckled up can strike other peop!e who are buckled up, or can be thrown out of the vehicle. Older children need to use safety belts properly.


Older children who have outgrown booster seats should wear the vehicle’s safety belts.


1-31


0: What if a child is wearing a lap-shoulder belt,


but the child is so small that the shoulder belt is very close to the child’s face or neck? A: If the child is sitting in a seat next to a window, move the child toward the center of the vehicle. If the child is sitting in the center rear seat passenger position, move the child toward the safety belt buckle. In either case, be sure that the shoulder belt still is on the child’s shoulder, so that in a crash the child’s upper body would have the restraint that the belts provide. If the child is sitting in a rear seat outside position, see Rear Safety Belt Comfort Guides for Children and Small Adults on page 1-28.


Never do this. Here two children are wearing the same belt. The belt can’t properly spread the impact forces. In a crash, the two children can be crushed together and seriously injured. A belt must be used by only one person at a time.


1-32


this way, in a crash the child might slide under the belt. The belt’s force would then be applied right on the child’s abdomen. That could cause serious or fatal injuries.


Wherever the child sits, the lap portion of the belt should be worn low and snug on the hips, just touching the child’s thighs. This applies belt force to the child’s pelvic bones in a crash. infants and Yoting Children Everyone in a vehicle needs protection! This includes infants and all other children. Neither the distance traveled nor the age and size of the traveler changes the need, for everyone, to use safety restraints. In fact, the law in every state in the United States and in =\:e?; czzzeizz pm\/~-w-e szys +i!drc,z must be restrained while in a vehicle. Every time infants and young children ride in vehicles, they should have the protection provided by appropriate restraints. Young children should not use the vehicle’s adult safety belts alone, unless there is no other choice. Instead, they need to use a child restraint.


11n ts scme cann


U Y -


ur


1 -33


I Never do this.


Here a child is sitting in a seat that has a lap-shoulder belt, but the shoulder part is behind the child. If the child wears the belt in


CAUTION:


(Continued) I


People should never hold a baby in their arms while riding in a vehicle. A baby doesn’t weigh much -- until a crash. During a crash a baby will become so heavy it is not possible to hold it. For example, in a crash at only 25 mph (40 kmlh), a 12-lb. (5.5 kg) baby will suddenly become a 240-lb. (1 10 kg) force on a person’s arms. A baby should be secured in an appropriate restraint.


1 -34


Ch..-.-.1 who are up against, or very close to, any air bag when it inflates can be seriously injured or killed. Air bags plus lap-shoulder belts offer outstanding protection for adults and older children, but not for young children and infants. Neither the vehicle’s safety belt system nor its air bag system is designed for them. Young children and infants need the protection that a child restraint system can provide.


1-35


Newborn infants need complete support, including support for the head and neck. This is necessary because a newborn infant’s neck is weak and its head weighs so much compared with the rest of its body. In a crash, an infant in a rear-facing seat settles into the restraint, so the crash forces can be distributed across the strongest part of an infant’s body, the back and shoulders. Infants always should be secured in appropriate infant restraints.


Q: What are the different types of add-on child A: Add-on child restraints, which are purchased by the


restraints?


vehicle’s owner, are available in four basic types. Selection of a particular restraint should take into consideration not only the child’s weight, height and age but also whether or not the restraint will be compatible with the motor vehicle in which it will be used. For most basic types of child restraints, there are many different models available. When purchasing a child restraint, be sure it is designed to be used in a motor vehicle. If it is, the restraint will have a label saying that it meets federal motor vehicle safety standards. The restraint manufacturer’s instructions that come with the restraint state the weight and height limitations for a particular child restraint. In addition7 there are many kinds of restraints available for children with special needs.


1 -36


Child Restraint Systems


The body si, ,cture of a ],,,,d child is quite unlike that of an adult or older child, for whom the safety belts are designed. A young child’s hip bones are still so small that the vehicle’s regular safety belt may not remain low on the hip bones, as it should. Instead, it may settle up around the child’s abdomen. In a crash, the belt would apply force on a body area that’s unprotected by any bony structure. This alone could cause serious or fatal injuries. Young children always should be secured in appropriate child restraints.


:- -.- :.-.S--&


An infant car bed (A), a special bed made for use in a I I luwl VGI IIWG, 13 d l I II lial II I tau all I L ayaLcI I I UGDIYI IGU .---&-.- ..-l-:-l- to restrain or position a child on a continuous flat surface. Make sure that the infant’s head rests toward the center of the vehicle.


-.,- &.^-


.---&”-:-a


A--:-...-A


1-37


A rear-facing infant seat (B) provides restraint with the seating surface against the back of the infant. The harness system holds the infant in place and, in a crash, acts to keep the infant positioned in the restraint.


A forward-facing child seat (C-E) provides restraint for the child’s body with the harness and also sometimes with surfaces such as T-shaped or shelf-like shields.


1-38


Q: How do child restraints work? A: A child restraint system is any device designed for use in a motor vehicle to restrain, seat, or position children. A built-in child restraint system is a permanent part of the motor vehicle. An add-on child restraint system is a portable one, which is purchased by the vehicle's owner. For many years, add-on child restraints have used the adult belt system in the vehicle. To help reduce the chance of injury, the child also has to be secured within the restraint. The vehicle's belt system secures the add-on child restraint in the vehicle, and the add-on child restraii-it's hamess system holds the child in place within the restraint. One system, the three-point harness, has straps that come down over each of the infant's shoulders and buckle together at the crotch. The five-point harness system has two shoulder straps, two hip straps ana a croicn sirap. A snieia may 'rake the place of hip straps. A T-shaped shield has shoulder straps that are attached to a flat pad which rests low against the child's body. A shelf- or armrest-type shield has straps that are attached to a wide, cholf-lika chiold that cwintrc I rn nr tn tho cida


'yV up, V


S V .I I V V IU " .


"I S V l l I,,." V I l lV lU .I v u .


"..la


1-39


A booster seat (F-G) is a child restraint designed to improve the fit of the vehicle's safety belt system. Some booster seats have a shoulder belt positioner, and cnmn hinh-hDek hnnetnr enQte hQ\ln Q fhm-nnint hlrnncc ~ " ' I i " I llyl t UU"', U U U V L V , U"U.U A booster seat can also help a child to see out the window.


I 'U" u u I , Y v rJ"" I. 1 1 u . I I""".


A child in a rear-facing child restraint can be seriously injured or killed if the right front passenger’s air bag inflates. This is because the back of the rear-facing child restraint would be very close to the inflating air bag. Always secure a rear-facing child restraint in a rear seat. You may secure a forward-facing child restraint in the right front seat, but before you do, always move the front passenger seat as far back as it will go. It’s better to secure the child restraint in a rear seat.


When choosing a child restraint, be sure the child restraint is designed to be used in a vehicle. If it is, it will have a label saying that it meets federal motor vehicle safety standards. Then follow the instructions for the restraint. You may find these instructions on the restraint itself or in a booklet, or both. These restraints use the belt system in your vehicle, but the child also has to be secured within the restraint to help reduce the chance of personal injury. When securing an add-on child restraint, refer to the instructions that come with the restraint which may be on the restraint itself or in a booklet, or both, and to this manual. The child restraint instructions are important, so if they are not available, obtain a replacement copy from the manufacturer. Where to Put the Restraint Accident statistics show that children are safer if they are restrained in the rear rather than the front seat. General Motors, therefore, recommends that child restraints be secured in a rear seat, including an infant riding in a rear-facing infant seat, a child riding in a forward-facing child seat and an older child riding in a booster seat. Never put a rear-facing child restraint in the front passenger seat. Here’s why:


1-40


A child in a child restraint i he center front seat can be badly injured or killed by the right front passenger’s air bag if it inflates. Never secure a child restraint in the center front seat. It’s always better to secure a child restraint in the rear seat. You may secure a forward-facing child restraint in the right front passenger seat, but before you do, always move the front passenger seat as far back as it will go. It’s better to secure the child restraint in a rear seat.


Wherever you install it, be sure to secure the child restraint properly. Keep in mind that an unsecured child restraint can XGV’Z arsznd in i; esllisizz s; szddzn stsp and in;z;Z people in the vehicle. Be sure to properly secure any child restraint in your vehicle - even when no child is in it.


Top Strap


Some child restraints have a top strap, or “top tether”. It can help restrain the child restraint during a collision. For it to work, a top strap must be properly anchored to the vehicle. Some top strap-equipped child restraints are designed for use with or without the top strap being anchored. Others require the top strap always to be anchored. Be sure to read and follow the instructions for your child restraint. If yours requires that the top strap be anchored, don’t use the restraint unless it is anchored properly. If the child restraint does not have a top strap, one can be obtained, in kit form, for many child restraints. Ask the child restraint manufacturer whether or not a kit is available.


1-41


Once you have the top strap anchored, you'll be ready to secure the child restraint itself. Tighten the top strap when and as the child restraint manufacturer's instructions say. Top Strap Anchor Location Your vehicle has top strap anchors already installed for the rear seating positions. You'll find them behind the rear seat on the filler panel.


In Canada, the law requires that forward-facing child restraints have a top strap, and that the strap be anchored. In the United States, some child restraints also have a top strap. If your child restraint has a top strap, it should be anchored. Anchor the top strap to one of the following anchor points. Be sure to use an anchor point located on the same side of the vehicle as the seating position where the child restraint will be placed.


1 -42


Lower Anchorages and Top Tethers for Children (LATCH System) Your vehicle has the LATCH system. You’ll anchors (A) in all three rear seating positions.


find


In order to use the system, you need either a forward-facing child restraint that has attaching points (B) at its base and a top tether anchor (C), or a rear-facing child restraint that has attaching points (B), as shown here.


To assist you in locating the lower anchors for this child restraint system, each seating position with the LATCH system will have a dot on the seatback directly above the anchor.


A. Vehicle anchor B. LATCH system attachment points C. Top strap


1-43


With this system, use the LATCH system instead of the vehicle’s safety belts to secure a 4


Id restraint.


~~


---nt isn’t attach(- _. ..


If a LATCH-typc hild rt its anchorage points, the restraint won’t be able to protect a child sitting there. In a crash, the child could be seriously injured or killed. Make sure that a LATCH-type child restraint is properly installed using the anchorage points, or use the vehicle’s safety belts to secure the restraint. See “Securing a Child Restraint Designed for the LATCH System”, “Securing a Child Restraint in a Rear Outside Seat Position” or “Securing a Child Restraint in a Center Rear Seat Position” in the Index for information on how to secure a child restraint in your vehicle.


A. Vehicle anchor B. LATCH system attachment points


1 -44


Securing a Child Restraint Designed for the LATCH System 1. Find the anchors for the seating position you want


to use, where the bottom of the seatback meets the back of the seat cushion.


2. Put the child restraint on the seat. 3. Attach the anchor points on the child restraint to the


anchors in the vehicle. The child restraint instructions will show you how.


4. If the child restraint is forward-facing, attach the top


strap to the top strap anchor. See Top Strap on page 1-41. Tighten the top strap according to the chifd restraint instructions.


5. Push and pull the child restraint in different


directions to be sure it is secure.


To remove the child restraint, simply unhook the top strap from the top tether anchor and then disconnect the anchor points.


Securing a Child Restraint in a Rear Seat Position


If your child restraint is equipped with the LATCH system, see lower Anchorages and Top Tethers for Ciskken (LATCH Syste,?) on page 1-43.


1 -45


A child in a child restraint in the center front seat can be badly injured or killed by the right front passenger’s air bag if it inflates. Never secure a child restraint in the center front seat. It’s always better to secure a child restraint in the rear seat. You may secure a forward-facing child restraint in the right front passenger seat, but before you do, always move the front passenger seat as far back as it will go. It’s better to secure the child restraint in a rear seat.


You’ll be using the lap-shoulder belt. See Top Strap on page 1-41 if the child restraint has one. Be sure to follow the instructions that came with the child restraint. Secure the child in the child restraint when and as the instructions say.


1. Put the restraint on the seat. 2. Pick up the latch plate, and run the lap and shoulder


portions of the vehicle’s safety belt through or around the restraint. The child restraint instructions will show you how.


1-46


3. Buckle the belt. Make sure the release button is


positioned so you would be able to unbuckle the safety belt quickly if you ever had to.


:


4. Pull the rest of the shoulder belt all the way out of


the retractor to set the lock.


5.


6.


To tighten the belt, feed the shoulder belt back into the retractor while you push down on the child restraint. If you’re using a forward-facing child :4r&izt, yes p,&y fikd it +!;=fG! ?e push down on the child restraint as you tighten the belt. Push and pull the child restraint in different directions to be sure it is secure.


yr88: h c e t=,


1 -47


To remove the child restraint, just unbuckle the vehicle’s safety belt and let it go back all the way. The safety belt will move freely again and be ready to work for an adult or larger child passenger. Securing a Child Restraint in the Right Front Seat Position


If your child restraint is equipped with the LATCH system, see Lower Anchorages and Top Tethers for Children (LATCH System) on page 1-43. Your vehicle has a right front passenger air bag. Never put a rear-facing child restraint in this seat. Here’s why:


1-48


- - chi.- in a rear-facing child restraint CL.. ub seriously injured or killed if the right front passenger’s air bag inflates. This is because the back of the rear-facing child restraint would be very close to the inflating air bag. Always secure a rear-facing child restraint in a rear seat.


Although a rear seat is a safer place, you can secure a forward-facing child restraint in the right front seat. You’ll be using the lap-shoulder belt. See the earlier part about the Top Strap on page 1-41, if the child restraint has one. Be sure to follow the instructions that came with the child restraint. Secure the child in the child restraint when and as the instructions say. 1. Because your vehicle has a right front passenger


air bag, always move the seat as far back as it will go before securing a forward-facing child restraint. See Seats on page 1-2.


2. Put the restraint on the seat.


3. Pick up the latch plate, and run the lap and shoulder


portions of the vehicle’s safety belt through or around the restraint. The child restraint instructions will show you how.


4. Buckle the belt. Make sure the release button is positioned so you would be able to unbuckle the safety belt quickly if you ever had to.


5. Pull the rest of the shoulder belt all the way out of


the retractor to set the lock.


1-49


6. To tighten the belt, feed the shoulder belt back into


the retractor while you push down on the child restraint. You may find it helpful to use your knee to push down on the child restraint as you tighten the belt.


7. Push and pull the child restraint in different


directions to be sure it is secure.


To remove the child restraint, just unbuckle the vehicle’s safety belt and let it go back all the way. The safety belt will move freely again and be ready to work for an adult or larger child passenger.


1-50


Frontal air bags are designed to help reduce the risk of injury from the force of an inflating frontal air bag. But these air bags must inflate very quickly to do their job and comply with federal regulations.


Air Bag Systems This part explains the frontal and side impact air bag systems. Your vehicle has air bags - a frontal air bag for the driver and another frontal air bag for the right front passenger. Your vehicle may also have a side impact air bag for the driver.


If your vehicle has a side impact air bag for the driver it will say AIR BAG on the air bag covering on the side of the driver’s seatback closest to the door.


1-51


Here are the most important things to know about the air bag svstems:


You can be severela njL d or killed in a crash if you aren’t wearing your safety belt, even if you have air bags. Wearing your safety belt during a crash helps reduce your chance of hitting things inside the vehicle or being ejected from it. Air bags are designed to work with safety belts but don’t replace them. Frontal air bags for the driver and right front passenger are designed to deploy only in moderate to severe frontal and near frontal crashes. They aren’t designed to inflate at all


CAUTION:


(Continued)


in rollover, rear or low-speed frontal crashes, or in many side crashes. And, for some unrestrained occupants, frontal air bags may provide less protection in frontal crashes than more forceful air bags have provided in the past. The side impact air bag for the driver is designed to inflate only in moderate to severe crashes where something hits the driver’s side of your vehicle. It isn’t designed to inflate in frontal, in rollover or in rear crashes. Everyone in your vehicle should wear a safety belt properly, whether or not there’s an air bag for that person.


1-52


Bob1 irontal and side impact air bags inflate with great force, faster than the blink of an eye. If you’re too close to an inflating air bag, as you would be if you were leaning forward, it could seriously injure you. Safety belts help keep you in position for air bag inflation before and during a crash. Always wear your safety belt, even with frontal air bags. The driver should sit as far back as possible while still maintaining control of the vehicle, and should not lean on the door.


not for younc hildren and infants. Neither the vehicle’s safety belt system nor its air bag system is designed for them. Young children and infants need the protection that a child restraint system can provide. Always secure children properly in your vehicle. To read how, see the part of this manual called “Older Children” or “Infants and Young Children”.


There is a air bag readiness light on the instrument panel, which shows the air bag symbol.


Anyone who is up against, or very close to, any air bag when it inflates can be seriously injured or killed. Air bags plus lap-shoulder belts offer the best protection for adults, but


CAUTION:


(Continued) I


The system checks the air bag electrical system for malfunctions. The light tells you if there is an electrical problem. See Air Bag Readiness Light on page 3-32 for more information.


1-53


Where Are the Air Bags?


The driver‘s frontal air bag is in the middle of the steering wheel.


The right front passenger’s frontal air bag is in the instrument panel on the passenger’s side.


1 -54


If your vehicle has one, the driver’s side impact air bag is in the side of the driver’s seatback closest to the door.


If something is between an occupant and an air bag, the bag might not inflate properly or it might force the object into that person causing severe injury or even death. The path of an inflating air bag must be kept clear. Don’t put anything between an occupant and an air bag, and don’t attach or put anything on the steering wheel hub or on or near any other air bag covering. Don’t let seat covers block the inflation path of a side impact air bag.


1-55


When Should an Air Bag Inflate? The driver’s and right front passenger’s frontal air bags are designed to inflate in moderate to severe frontal or near-frontal crashes. But they are designed to inflate only if the impact speed is above the system’s designed “threshold level”. In addition, your vehicle has “dual stage” frontal air bags, which adjust the amount of restraint according to crash severity. For moderate frontal impacts, these air bags inflate at a level less than full deployment. For more severe frontal impacts, full deployment occurs. If the front of your vehicle goes straight into a wall that doesn’t move or deform, the threshold level for the reduced deployment is about 12 to 18 mph (19 to 29 km/h), and the threshold level for a full deployment is about 18 to 24 mph (29 to 38.5 km/h). The threshold level can vary, however, with specific vehicle design, so that it can be somewhat above or below this range.


If your vehicle strikes something that will move or deform, such as a parked car, the threshold level will be higher. The driver’s and right front passenger’s frontal air bags are not designed to inflate in rollovers, rear impacts, or in many side impacts because inflation would not help the occupant. Your vehicle may or may not have a driver side air bag. See Air Bag Systems in the Index. A driver ’s side impact air bag is designed to inflate in moderate to severe side crashes involving the driver’s door. A side impact air bag will inflate if the crash severity is above the system’s designed “threshold level.” The threshold level can vary with specific vehicle design. A driver’s side impact air bag is not designed to inflate in frontal or near-frontal impacts, rollovers or rear impacts, because inflation would not help the occupant. In any particular crash, no one can say whether an air bag should have inflated simply because of the damage to a vehicle or because of what the repair costs were. For frontal air bags, inflation is determined by the angle of the impact and how quickly the vehicle slows down in frontal and near-frontal impacts. For side impact air bags, inflation is determined by the location and severity of the impact.


1-56


What Makes an Air Bag Inflate? In an impact of sufficient severity, the air bag sensing system detects that the vehicle is in a crash. For both the frontal and side impact air bags, the sensing system triggers a release of gas from the inflator, which inflates the air bag. The inflator, air bag and related hardware are all part of the air bag modules. Frontal air bag modules are located inside the steering wheel and instrument panel. For vehicles with a driver’s side impact air bag, the air bag moules are located in the seatback closest to the driver’s door.


How Does an Air Bag Restrain? In moderate to severe frontal or near frontal collisions, even belted occupants can contact the steering wheel or the instrument panel. In moderate to severe side collisions, even belted occupants can contact the inside of the vehicle. The air bag supplements the protection provided by safety belts. Air bags distribute the force of the impact more evenly over the occupant’s upper body, stopping the occupant more gradually. But the frontal air bags would not help you in many types of collisions, including rollovers, rear impacts, and many side impacts, primarily because an occupant’s motion is not toward the air bag. A side impact air bag would not help you in many types of collisions, including frontal or near frontal collisions, rollovers, and rear impacts, primarily because an occupant’s motion is not toward that air bag. Air bags should never be regarded as anything more than a supplement to safety belts, and then only in moderate to severe frontal or near-frontal collisions for the driver’s and right front passenger’s frontal air bags, and only in moderate to severe side collisions for vehicles with a driver’s side impact air bag.


1-57


What Will You See After an Air Bag Inflates? After the air bag inflates, it quickly deflates, so quickly that some people may not even realize the air bag inflated. Some components of the air bag module will be hot for a short time. These components include the steering wheel hub for the driver’s frontal air bag and the instrument panel for the right front passenger’s frontal air bag. For vehicle’s with a driver’s side impact air bag, the side of the seatback closest to the driver’s door will be hot. The parts of the bag that come into contact with you may be warm, but not too hot to touch. There will be some smoke and dust coming from the vents in the deflated air bags. Air bag inflation doesn’t prevent the driver from seeing or being able to steer the vehicle, nor does it stop people from leaving the vehicle.


When an air bag inflates, there is dust in the air. This dust could cause breathing problems for people with a history of asthma or other breathing trouble. To avoid this, everyone in the vehicle should get out as soon as it is safe to do so. If you have breathing problems but can’t get out of the vehicle after an air bag inflates, then get fresh air by opening a window or a door. If you experience breathing problems following an air bag deployment, you should seek medical attention.


Your vehicle has a feature that will automatically unlock the doors and turn the interior lamps on when the air bags inflate (if battery power is available). You can lock the doors again and turn the interior lamps off by using the door lock and interior lamp controls.


1-58


0 Let only qualified technicians work on your air bag


systems. Improper service can mean that an air bag system won’t work properly. See your dealer for service.


Notice: If you damage the covering for the driver’s or the right front passenger’s air bag, or the air bag covering on the driver’s seatback, the bag may not work properly. You may have to replace the air bag module in the steering wheel, both the air bag module and the instrument panel for the right front passenger’s air bag, or the air bag module and seatback for the driver’s side impact air bag. Do not open or break the air bag coverings.


In many crashes severe enough to inflate an air bag, windshields are broken by vehicle deformation. Additional windshield breakage may also occur from the right front passenger air bag.


Air bags are designed to inflate only once. After an air bag inflates, you’ll need some new parts for your air bag system. If you don’t get them, the air bag system won’t be there to help protect you in another crash. A new system will include air bag modules and possibly other parts. The service manual for your vehicle covers the need to replace other parts. Your vehicle is equipped with an electronic frontal sensor, which helps the sensing system distinguish between a moderate frontal impact and a more severe frontal impact. Your vehicle is also equipped with a crash sensing and diagnostic module, which records information about the frontal air bag system. The module records information about the readiness of the system, when the system commands air bag inflation and driver’s safety belt usage at deployment. The module also records speed, engine RPM, brake and throttle data.


1-59


Servicing Your Air Bag-Equipped Vehicle Air bags affect how your vehicle should be serviced. There are parts of the air bag systems in several places around your vehicle. Your dealer and the service manual have information about servicing your vehicle and the air bag systems. To purchase a service manual, see Service Publications Ordering Information on page 7-9.


For up to 10 seconds after the ignition key is turned off and the battery is disconnected, an air bag can still inflate during improper service. You can be injured if you are close to an air bag when it inflates. Avoid yellow connectors. They are probably part of the air bag system. Be sure to follow proper service procedures, and make sure the person performing work for you is qualified to do so.


The air bag systems do not need regular maintenance.


1-60


Restraint System Check


Checking Your Restraint Systems Now and then, make sure the safety belt reminder light and all your belts, buckles, and anchorages are working properly. Look for any other loose or damaged safety belt system parts. If you see anything that might keep a safety belt system from doing its job, have it repaired.


latch plates, retractors


Torn or frayed safety belts may not protect you in a crash. They can rip apart under impact forces. If a belt is torn or frayed, get a new one right away. Also look for any opened or broken air bag covers, and have them repaired or replaced. (The air bag system does not need regular maintenance.)


1-61


Replacing Restraint System Parts After a Crash


A crash can damage the restraint systems in your vehicle. A damaged restraint system may not properly protect the person using it, resulting in serious injury or even death in a crash. To help make sure your restraint systems are working properly after a crash, have them inspected and any necessary replacements made as soon as possible.


If you’ve had a crash, do you need new belts or LATCH system parts? After a very minor collision, nothing may be necessary. But if the belts were stretched, as they would be if worn during a more severe crash, then you need new parts. If the LATCH system was being used during a more severe crash, you may need new LATCH system parts. If belts are cut or damaged, replace them. Collision damage also may mean you will need to have LATCH system, safety belt or seat parts repaired or replaced. New parts and repairs may be necessary even if the belt or LATCH system wasn’t being used at the time of the collision. If an air bag inflates, you’ll need to replace air bag system parts. See the part on the air bag system earlier in this section.


1-62


Section 2


Features and Controls


Keys ............................................................... 2.2 ......................... 2.3 Remote Keyless Entry System Remote Keyless Entry System Operation ........... 2.4 Doors and Locks ............................................. 2.8 Door Locks .................................................... 2.8 Power Door Locks .......................................... 2.9 Programmable Automatic Door Locks ................ 2.9 Lockout Protection ....................................... -2-1 0 .................................... 2.10 Leaving Your Vehicle Trunk .......................................................... 2-10 Windows ........................................................ 2.13 Power Windows ............................................ 2.14 Sun Visors ................................................... 2.15 Theft-Deterrent Systems .................................. 2.16 Content Theft-Deterrent ................................. 2.16 Passlock@ .................................................... 2.17 Starting and Operating Your Vehicle ................ 2.18 0 4 0 L- I u Ignition Positions .......................................... 2.18 Starting Your Engine ..................................... 2.19 Engine Coolant Heater .................................. 2.22 Automatic Transaxle Operation ....................... 2.23 Parking Brake .............................................. 2.27 Shifting into Park (pi ....................................... - rL/


....................................


\In.#. \/nh;nln Drrrnl. in I Y G Y Y


v G I IIWG u l ~ u n - 1 1


n n-r


.........


Shifting Out of Park (P) ............... -2-30 Parking Over Things That Burn ....................... 2-31 2-31 Engine Exhaust ............................................ Running Your Engine While You Are Parked .... 2-32 Mirrors ........................................................... 2-33 Manual Rearview Mirror ................................. 2-33 Manual Rearview Mirror with Onstar@ .............. 2-33 Automatic Dimming Rearview Mirror ................ 2-34 Automatic Dimming Rearview Mirror with Onstat-@ ............................


Outside Power Mirrors ........... Heated Outside Mirrors .............. Outside Convex Mirror ..................................


......... 2-35 ............ -2-36 ......... 2-36 -2-36 Onstar@ System ............................................. 2-37 HomeLink@ Transmitter ................................... 2-39 Programming the HomeLink Transmitter ........... 2-39 2-43


Storage Areas ................................................


...............


u t V V G Y W A ............................................... Q l n . r n Dnv ......... 2-43 Front Storage Area Center Console Storage Area ..... ............. 2-43 Rear Storage Area ......... 2-43 Convenience Net .......................................... 2-43 Sunroof ......................................................... 2-44 Vehicle Personalization ................................... 2-45


................


Leaving children in a vehicle with the ignition key is dangerous for many reasons. A child or others could be badly injured or even killed. They could operate the power windows or other controls or even make the vehicle move. Don’t leave the keys in a vehicle with children.


2-2


One key is used for the ignition, the driver's door and all other locks.


If you need a new key, contact your dealer for assistance. In an emergency, contact Chevrolet Roadside Assistance. See Roadside Assistance Program on page 7-5 for more information. Notices Your vehicle has a number of features that can help prevent theft. You can have a lot of trouble getting into your vehicle if you ever lock your keys inside. You may even have to damage your vehicle to get in. So be sure you have spare keys. If your vehicle is equipped with the Onstar@ system, with an active subscription and you lock your keys inside the vehicie, OnStaP may be abie $0 send a command to unlock your vehicle. See Onstar@ System on page 2-37 for more information.


Remote Keyless Entry System The remote keyless entry system operates on a radio frequency subject to Federal Communications Commission (FCC) Rules and with Industry Canada. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:


1. This device may not cause interference, and 2. This device must accept any interference received,


including interference that may cause undesired operation of the device.


This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions:


1. This device may not cause interference, and 2. This device must accept any interference received,


including interference that may cause undesired operation of the device.


Changes or modifications to this system by other than an authorized service facility could void authorization to use this equipment.


2-3


At times you may notice a decrease in range. This is normal for any remote keyless entry system. If the transmitter does not work or if you have to stand closer to your vehicle for the transmitter to work, try this:


Check the distance. You may be too far from your vehicle. You may need to stand closer during rainy or snowy weather. Check the location. Other vehicles or objects may be blocking the signal. Take a few steps to the left or right, hold the transmitter higher, and try again. Check to determine if battery replacement or resynchronization is necessary. See “Battery Replacement” and “Resynchronization” under Remote Keyless Entry System Operation on page 2-4. If you are still having trouble, see your dealer or a qualified technician for service.


Remote Keyless Entry System Operation


Using the remote keyless entry transmitter, you can lock and unlock your doors or release your trunk from about 3 feet (1 m) up to 30 feet (9 m) away.


LOCK: Press the LOCK button to lock all the doors. UNLOCK: Press the UNLOCK button once to unlock the driver’s door and turn on the interior lamps. See “Illumination on Remote Activation” later in this section for more details. Pause for about one second, then press UNLOCK again to unlock the passenger door.


2-4


& (Remote Alarm): Press this button to activate an alarm. The ignition must be in OFF or ACC for the remote alarm to work. When you press the remote button, the headlamps will flash, the horn will sound repeatedly and your interior lamps will turn on attracting attention if you need it. The alarm will continue until one of the following occurs:


The remote alarm button is pressed a second time, the vehicle’s ignition is turned to ON or an alarm period of 11 0 seconds has elapsed.


a (Trunk Release): Press the button to release


the trunk. Operating the remote keyless entry transmitter may interact with the content theft-deterrent system, if your vehicle has this option. See Content Theft-Deterrent on page 2- 16.


Transmitter Verification This feature provides feedback that a command has been received by the keyless entry receiver. The headlamps and back-up lamps will flash on every lock and on the first unlock command. The horn will also sound once for every lock and twice for the first unlock command. Silent operation and other options may be selected for this feature. See Vehicle Personalization on page 2-45. If your vehicle has the optional content theft-deterrent system, the first time the remote unlock is received, three flashes from the headlamps will be seen and chirps will be heard to indicate an alarm condition has occurred since last arming. See Content Theft-Deterrent on page 2- i6.


2-5


Illumination on Remote Activation The interior lamps will come on when either the UNLOCK, the trunk release or the panic alarm button is pressed. The interior lamps will remain on for 40 seconds or until the ignition is turned to ON or LOCK is pressed. Locking the doors with the power door locks will also cause the lamps to turn off. If a door is opened during the 40 second period, the interior lamps will remain on while the door is open.


Matching Transmitter(s) to Your Vehicle Each remote keyless entry transmitter is coded to prevent another transmitter from unlocking your vehicle. If a transmitter is lost or stolen, a replacement can be purchased through your dealer. Remember to bring any remaining transmitters with you when you go to your dealer. When the dealer matches the replacement transmitter to your vehicle, any remaining transmitters must also be matched. Once your dealer has coded the new transmitter, the lost transmitter will not unlock your vehicle. Each vehicle can have a maximum of four transmitters matched to it. If you prefer, you can complete this procedure yourself See Vehicle Personalization on page 2-45 for more information.


?-6


Battery Replacement Under normal use, the battery in your remote keyless entry transmitter should last about three years. You can tell the battery is weak if the transmitter won’t work at the normal range in any location. If you have to get close to your vehicle before the transmitter works, it’s probably time to change the battery.


Notice: When replacing the battery, use care not to touch any of the circuitry. Static from your body transferred to these surfaces may damage the transmitter. To replace the battery do the following:


1. Insert a flat object like a coin into the slot on the back of the transmitter. Gently pry apart the front and back.


2. Gently pry the battery out of the transmitter. Do not


use a metal object.


3. Put the new battery into the transmitter as shown


on the transmitter. Use type CR2032 battery or equivalent.


4. Put the two haives back together. Make sure the halves are together tightly so water won’t get in.


5. Resynchronize and then test the transmitter. Resynchronization After you have changed the battery in your transmitter. you wiii need io resyncilrorriLe iire irarrsrrliiier. I o do this, press the LOCK and UNLOCK buttons on the transmitter at the same time and hold for approximately seven seconds or until one horn chirp is heard.


2-7


Doors and Locks


Door Locks


_____ -II


Unlocked doors can be dangerous.


Passengers - especially children - can easily open the doors and fall out of a moving vehicle. When a door is locked, the handle won’t open it. You increase the chance of being thrown out of the vehicle in a crash if the doors aren’t locked. So, wear safety belts properly and lock the doors whenever you drive. Young children who get into unlocked vehicles may be unable to get out. A child can be overcome by extreme heat and can suffer permanent injuries or even death from heat stroke. Always lock your vehicle whenever you leave it. Outsiders can easily enter through an unlocked door when you slow down or stop your vehicle. Locking your doors can help prevent this from happening.


2-8


There are several ways to lock and unlock your vehicle. From the outside, use your key or remote keyless entry transmitter. From the inside, use the manual or power door locks. To unlock the driver’s side door from the outside with the key, insert the key and turn it toward the front of the vehicle. To lock the driver’s side door from the outside with your key, insert the key and turn it toward the rear of the vehicle.


To lock the doG: from the inside, push the manual lock lever forward. To unlock the door, pull the lever rearward.


Power Door Locks


A power door lock switch is located on each front door above the armrest.


Press the top of the switch to unlock all doors, or press the bottom part of the switch to lock all doors. The rear doors do not have power door lock switches. The lever on each rear door works only that door’s lock. If your vehicle has the optional content theft-deterrent system and it is armed, the power door lock switches will be disabled. You must use your remote keyless entry transmitter or your key to unlock the doors when the system is armed.


Programmable Automatic Door Locks Programmable automatic power door locks are a standard feature that is intended to provide enhanced security and convenience by automatically locking and unlocking doors. Programmable Modes


Mode 1: No automatic door lock or unlock. Mode 2: Automatic all-door lock when the transaxle is shifted out of PARK (P); no automatic door unlock. Mode 3: Automatic aii-door iock when the transaxie is shifted out of PARK (P); automatic unlock for the driver’s door only when the transaxle is shifted into PARK (P).


I- . x 1


illiu r h n n \r). n A n m , fn\


Mode 4: Automatic all-door lock when the transaxle is shifted out of PARK (P); automatic all-door unlock W ~ I W I iile irarlsaxie i s s1111te6 Before your vehicle was shipped from the factory, it was programmed to Mode 4. The mode to which the vehicle was programmed may have been changed since it left the factory. To determine the mode to which p n r \./Phi& to a different mode, see Vehicle Personalization on page 2-45.


to pmgram )/OUT yehi&


is prqrammed


2-9


Disconnecting the battery for up to a year will not change the programmed mode of the programmable automatic power door locks. Lockout Protection To protect you from locking your key in the vehicle, this feature stops the power door locks from locking when the keys are in the ignition and a door is open. If a power lock switch is pressed when a door is open and the key is in the ignition, all of the doors will lock and then the driver’s door will unlock. A chime will sound continuously until all doors are closed. Leaving Your Vehicle If you are leaving the vehicle, take your keys, open your door and set the locks from inside. Then get out and close the door.


Trunk


It can be dangerous to drive with the trunk lid open because carbon monoxide (CO) gas can come into your vehicle. You can’t see or smell CO. It can cause unconsciousness and even death. If you must drive with the trunk lid open or if electrical wiring or other cable connections must pass through the seal between the body and the trunk lid:


Make sure all other windows are shut. Turn the fan on your heating or cooling system to its highest speed and select the control setting that will force outside air into your vehicle. See “Climate Controls” in the Index. If you have air outlets on or under the instrument panel, open them all the way.


See “Engine Exhaust’’ in the Index.


Trunk Lock To unlock the trunk from the outside, insert the key in the lock and turn it. You can also press the car symbol on your remote keyless entry transmitter, if equipped. Remote Trunk Release You can also unlock the trunk from inside the vehicle.


Trunk Assist Handle


There is an assist handle located on the inside of the trunk lid toward the driver's side of the vehicle.


Press the button located below the exterior lamps control on the underside of the dashboard. The shift lever must be in PARK (P) for the remote trunk release button to work.


Notice; The trunk assist handle is not designed to be used to tie down the trunk lid or as an anchor

Loading...
x