You may also be interested in...
Download PDF Manual

centered in the display. The DIC is contained within the tachometer ring. Additionally, there are two configurable pocket gauges in the lower left and right corners.


Includes an asymmetric tachometer with prominent red-line markings and a lap timer that shows the current, previous, and best lap.


Tour


Includes a partial tachometer ring. The DIC is contained within the tachometer ring. There is also an


Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7576293) - 2015 - crc - 6/17/14


Black plate (10,1)


5-10


Instruments and Controls


area used to display icons or images for the DIC or phone contacts. The instrument cluster display configuration is selected through the cluster menu. See “Settings” under “Cluster Menu” following. Cluster Menu There is an interactive display area in the center of the instrument cluster.


Use the right steering wheel control to open and scroll through the different items and displays. Press o to access the cluster applications. Use w or x to scroll through the list of applications.


Info. This is where you can view the Driver Information Center (DIC) displays. See Driver Information Center (DIC) on page 5-26.


. Performance . Audio . Phone . Navigation (If Equipped) . Settings


Performance Press SEL to enter the Performance menu. Use w or x to scroll through the available items.


G-force: Gives the driver an indication of the vehicle performance in cornering. The G-force is displayed in the center of the DIC as a numerical value. Friction Bubble: A four quadrant visual display, indicative of the four corners of the car, with a “bubble” showing where the most inertia is being exerted on the vehicle. Performance Timer: Press p when Performance Timer is displayed to enter the menu. Press p while Set Start Speed is highlighted then use w or x to enter the start speed. Press SEL to save it. Press p while Set End Speed is highlighted then use w or x to enter the end speed. Press SEL to save it. After the start and end speeds have been entered, press o to set the Sport display to the set speeds and the performance timer is ready to use. On the next acceleration, the performance time will record the time. To reset the


Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7576293) - 2015 - crc - 6/17/14


Black plate (11,1)


Instruments and Controls


5-11


timer, highlight Reset on the performance timer menu and press SEL. Lap Timer: Press p when Lap Timer is displayed to start, stop, or reset the lap timer. A stopwatch icon will be displayed when the lap timer is active. Press SEL while the Lap Timer page is active to start the timer. If the lamp timer is active, pressing SEL on any page will stop the current lap timer and start a new lap. Also, pressing and holding SEL on any page will stop the lap timer. Coolant Temperature: Shows the current coolant temperature in either degrees Celsius (°C) or degrees Fahrenheit (°F). Oil Temperature: Shows the current oil temperature in either degrees Celsius (°C) or degrees Fahrenheit (°F). Oil Pressure: Shows the current oil pressure in either kilopascal (kPa) or in pounds per square inch (psi).


Battery Voltage: Shows the current battery voltage. Transmission Fluid Temperature: Shows the temperature of the transmission fluid in either degrees Celsius (°C) or degrees Fahrenheit (°F). Tire Temperature: Shows tire temperature status as either Cold, Warm, or Hot. Warm is typical for normal driving while Hot is typical for aggressive driving. Unknown may be displayed if tire temperature information is unavailable. eLSD and Wheel Slip: Displays when the Electronic Limited Slip Differential (eLSD) is active and intervening with the vehicle’s normal operation. The display also displays slip percentage in a range of low, medium, and high. See Limited-Slip Differential (Except Z51 and Z06) on page 9-47 or Limited-Slip Differential (Z51 and Z06 Only) on page 9-47.


Audio While the audio app is open, use w or x to change the radio station or seek to the next or previous track, depending on the current audio source. Press SEL to enter the Audio menu. In the Audio menu browse for music, select from the favorites, or change the audio source.


Phone Press SEL to enter the Phone menu. In the Phone menu, if there is no active phone call, view recent calls, or scroll through contacts. If there is an active call, mute or unmute the phone or switch to handset or hands-free operation.


Navigation If equipped, press SEL to enter the Navigation menu. Displays a map or turn by turn directions. If there is no active route, press p to resume the last route and turn the voice prompts on/off. If there is an active


Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7576293) - 2015 - crc - 6/17/14


Black plate (12,1)


5-12


Instruments and Controls


route, press SEL to cancel route guidance or turn the voice prompts on/off.


Settings Press SEL to enter the Settings menu. Use w or x to scroll through items in the Settings menu. Units: Press p while Units is displayed to enter the Units menu. Choose US or Metric units by pressing SEL while the desired item is highlighted. Display Theme: Press p to enter the Display Theme menu. Select from Link to Drive Mode, Track, Sport, or Tour for the cluster theme. Speed Warning: The Speed Warning display allows the driver to set a speed that they do not want to exceed. To set the Speed Warning, press p when Speed Warning is displayed. Enable the speed warning and then use w or x to adjust the value. Press SEL to set the speed. Once the speed is set,


this feature can be turned off by pressing SEL while viewing this page. If the selected speed limit is exceeded, a pop-up warning is displayed with a chime. Pocket Gauges: Press p while Pocket Gauges is displayed to enter the menu and select gauges that can be displayed for the Sport theme on the left or right of the display area. Choose from Oil Pressure Gauge, Oil Temperature Gauge, Battery Voltage, Transmission Fluid Temperature Gauge, Horsepower, or a blank gauge. Software Info: Press p while Software Info is highlighted to display open source software information.


Speedometer The speedometer shows the vehicle's speed in either kilometers per hour (km/h) or miles per hour (mph).


Odometer The odometer shows how far the vehicle has been driven, in either kilometers or miles.


Trip Odometer The trip odometer shows how far the vehicle has been driven since the trip odometer was last reset. The trip odometer is accessed and reset through the Driver Information Center (DIC). See Driver Information Center (DIC) on page 5-26.


Tachometer The tachometer displays the engine speed in revolutions per minute (rpm).


Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7576293) - 2015 - crc - 6/17/14


Black plate (13,1)


{ Caution


Fuel Gauge


If the engine is operated with the rpm’s in the warning area at the high end of the tachometer, the vehicle could be damaged, and the damage would not be covered by the vehicle warranty. Do not operate the engine with the rpm’s in the warning area.


Metric


English


Instruments and Controls


5-13


When the ignition is on, the fuel gauge indicates about how much fuel is left in the tank. An arrow on the fuel gauge indicates the side of the vehicle the fuel door is on. When the indicator nears empty, the low fuel light comes on. There is still a little fuel left, but the fuel tank should be filled soon. Here are four things that some owners ask about. None of these show a problem with the fuel gauge: . At the service station, the fuel


pump shuts off before the gauge reads full. It takes a little more or less fuel to fill up than the gauge indicated. For example, the gauge indicated the tank was half full, but it actually took a little more or less than half the tank's capacity to fill the tank. The gauge moves a little while turning a corner or speeding up.


Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7576293) - 2015 - crc - 6/17/14


Black plate (14,1)


This gauge indicates vacuum during light to moderate throttle and boost under heavier throttle. It displays the air pressure level in the intake manifold before it enters the engine's combustion chamber. The gauge is automatically centered at zero every time the engine is started. Actual vacuum or boost is displayed from this zero point. Changes in ambient pressure, such as driving in mountains and changing weather, will slightly change the zero reading.


5-14


Instruments and Controls


The gauge takes a few seconds to stabilize after the ignition is turned on, and goes back to empty when the ignition is turned off.


Boost Gauge


Metric


English


Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7576293) - 2015 - crc - 6/17/14


Black plate (15,1)


Engine Coolant Temperature Gauge


Metric


Instruments and Controls


5-15


Safety Belt Reminders


Driver Safety Belt Reminder Light There is a driver safety belt reminder light on the instrument cluster.


English


This gauge shows the engine coolant temperature. If the gauge pointer moves to the high end, the engine is too hot. This reading indicates the same thing as the warning light. It means that the engine coolant has overheated. If the vehicle has been operating under normal driving conditions, pull off the road, stop the vehicle, and turn off the engine as soon as possible. See Engine Overheating on page 10-27 for more information.


When the vehicle is started, this light flashes and a chime may come on to remind the driver to fasten their safety belt. Then the light stays on solid until the belt is buckled. This cycle may continue several times if the driver remains or becomes unbuckled while the vehicle is moving. If the driver safety belt is buckled, neither the light nor chime comes on.


Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7576293) - 2015 - crc - 6/17/14


Black plate (16,1)


5-16


Instruments and Controls


Passenger Safety Belt Reminder Light There is a passenger safety belt reminder light on the instrument panel cluster.


When the vehicle is started this light flashes and a chime may come on to remind passengers to fasten their safety belt. Then the light stays on solid until the belt is buckled. This cycle continues several times if the passenger remains or becomes unbuckled while the vehicle is moving. If the passenger safety belt is buckled, neither the chime nor the light comes on. The front passenger safety belt reminder light and chime may turn on if an object is put on the seat


such as a briefcase, handbag, grocery bag, laptop or other electronic device. To turn off the reminder light and/or chime, remove the object from the seat or buckle the safety belt.


Airbag Readiness Light This light shows if there is an electrical problem with the airbag system. The system check includes the airbag sensor(s), passenger sensing system, the pretensioners, the airbag modules, the wiring, and the crash sensing and diagnostic module. For more information on the airbag system, see Airbag System on page 3-15.


The airbag readiness light comes on for several seconds when the vehicle is started. If the light does not come on then, have it fixed immediately.


{ Warning


If the airbag readiness light stays on after the vehicle is started or comes on while driving, it means the airbag system might not be working properly. The airbags in the vehicle might not inflate in a crash, or they could even inflate without a crash. To help avoid injury, have the vehicle serviced right away.


If there is a problem with the airbag system, a Driver Information Center (DIC) message may also come on. See Airbag System Messages on page 5-42.


Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7576293) - 2015 - crc - 6/17/14


Black plate (17,1)


Instruments and Controls


5-17


Passenger Airbag Status Indicator The vehicle has a passenger sensing system. See Passenger Sensing System on page 3-20 for important safety information. The passenger airbag status indicator is on the instrument panel.


United States


Canada and Mexico


When the vehicle is started, the passenger airbag status indicator will light ON and OFF, or the symbol for on and off, for several seconds as a system check. Then, after several more seconds, the status indicator will light either ON or OFF,


or the on or off symbol, to let you know the status of the front outboard passenger frontal airbag. If the word ON or the on symbol is lit on the passenger airbag status indicator, it means that the front outboard passenger frontal airbag is allowed to inflate. If the word OFF or the off symbol is lit on the airbag status indicator, it means that the passenger sensing system has turned off the front outboard passenger frontal airbag. If, after several seconds, both status indicator lights remain on, or if there are no lights at all, there may be a problem with the lights or the passenger sensing system. See your dealer for service.


{ Warning


If the airbag readiness light ever comes on and stays on, it means that something may be wrong


(Continued)


Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7576293) - 2015 - crc - 6/17/14


Black plate (18,1)


5-18


Instruments and Controls


Warning (Continued)


with the airbag system. To help avoid injury to yourself or others, have the vehicle serviced right away. See Airbag Readiness Light on page 5-16 for more information, including important safety information.


Charging System Light


The charging system light comes on briefly when the ignition is turned on, but the engine is not running, as a check to show the light is working. It should go out when the engine is started.


If the light stays on or comes on while driving, there may be a problem with the electrical charging system. Have it checked by your dealer. Driving while this light is on could drain the battery. When this light comes on, the Driver Information Center (DIC) also displays a message. See Battery Voltage and Charging Messages on page 5-34. If a short distance must be driven with the light on, be sure to turn off all accessories, such as the radio and air conditioner.


Malfunction Indicator Lamp A computer system called OBD II (On-Board Diagnostics-Second Generation) monitors the operation of the vehicle to ensure emissions are at acceptable levels, helping to maintain a clean environment. The malfunction indicator lamp comes on when the vehicle is placed in


Service Only Mode, as a check to show it is working. If it does not, have the vehicle serviced by your dealer. See Ignition Positions on page 9-19.


If the malfunction indicator lamp comes on while the engine is running, this indicates that there is an OBD II problem and diagnosis and service might be required. Malfunctions often are indicated by the system before any problem is apparent. Being aware of the light can prevent more serious damage to the vehicle. This system also assists the service technician in correctly diagnosing any malfunction.


Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7576293) - 2015 - crc - 6/17/14


Black plate (19,1)


{ Caution


If the vehicle is continually driven with this light on, the emission controls might not work as well, the vehicle fuel economy might not be as good, and the engine might not run as smoothly. This could lead to costly repairs that might not be covered by the vehicle warranty.


{ Caution


Modifications made to the engine, transmission, exhaust, intake, or fuel system of the vehicle or the replacement of the original tires with other than those of the same Tire Performance Criteria (TPC) can affect the vehicle's emission controls and can cause this light to come on. Modifications to these systems


(Continued)


Instruments and Controls


5-19


Caution (Continued)


could lead to costly repairs not covered by the vehicle warranty. This could also result in a failure to pass a required Emission Inspection/Maintenance test. See Accessories and Modifications on page 10-2.


This light comes on during a malfunction in one of two ways: Light Flashing: A misfire condition has been detected. A misfire increases vehicle emissions and could damage the emission control system on the vehicle. Diagnosis and service might be required. To prevent more serious damage to the vehicle: . Reduce vehicle speed. . Avoid hard accelerations. . Avoid steep uphill grades.


If the light continues to flash, stop and park the vehicle. Turn the vehicle off, wait at least 10 seconds, and restart the engine. If the light is still flashing, follow the previous steps and see your dealer for service as soon as possible. Light On Steady: An emission control system malfunction has been detected on the vehicle. Diagnosis and service might be required. The following may correct an emission control system malfunction:


If fuel has been added to the vehicle using the capless funnel adapter, make sure the capless funnel adapter is removed. See “Filling the Tank with a Portable Gas Can” under Filling the Tank on page 9-55. The diagnostic system can detect if the adapter has been left installed in the vehicle, allowing fuel to evaporate into the atmosphere.


Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7576293) - 2015 - crc - 6/17/14


Black plate (20,1)


5-20


Instruments and Controls


A few driving trips with the adapter removed should turn off the light.


. Check that good quality fuel is used. Poor fuel quality causes the engine not to run as efficiently as designed and may cause stalling after start-up, stalling when the vehicle is changed into gear, misfiring, hesitation on acceleration, or stumbling on acceleration. These conditions might go away once the engine is warmed up. If one or more of these conditions occurs, change the fuel brand used. It may require at least one full tank of the proper fuel to turn the light off. See Fuel on page 9-53. If none of the above have made the light turn off, your dealer can check the vehicle. The dealer has the proper test equipment and diagnostic tools to fix any mechanical or electrical problems that might have developed.


Emissions Inspection and Maintenance Programs Depending on where you live, your vehicle may be required to participate in an emission control system inspection and maintenance program. For the inspection, the emission system test equipment will likely connect to the vehicle's Data Link Connector (DLC).


The DLC is under the instrument panel near the hood release. See your dealer if assistance is needed. The vehicle may not pass inspection if:


The malfunction indicator lamp is on with the engine running, or if the vehicle is placed in Service Only Mode and the malfunction


indicator lamp does not come on. See your dealer for assistance in verifying proper operation of the malfunction indicator lamp. The OBD II (On-Board Diagnostics) system determines that critical emission control systems have not been completely diagnosed. The vehicle would be considered not ready for inspection. This can happen if the 12-volt battery has recently been replaced or run down. The diagnostic system is designed to evaluate critical emission control systems during normal driving. This can take several days of routine driving. If this has been done and the vehicle still does not pass the inspection for lack of OBD II system readiness, your dealer can prepare the vehicle for inspection.


Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7576293) - 2015 - crc - 6/17/14


Black plate (21,1)


Instruments and Controls


5-21


Brake System Warning Light The vehicle brake system consists of two hydraulic circuits. If one circuit is not working, the remaining circuit can still work to stop the vehicle. For normal braking performance, both circuits need to be working. If the warning light comes on, there is a brake problem. Have the brake system inspected right away.


{ Warning


The brake system might not be working properly if the brake system warning light is on. Driving with the brake system warning light on can lead to a crash. If the light is still on after the vehicle has been pulled off the road and carefully stopped, have the vehicle towed for service.


Electric Parking Brake Light


brake is released, or while driving, there is a problem with the Electric Parking Brake system or another system. A message may also display in the Driver Information Center (DIC). See Brake System Messages on page 5-34. If the light does not come on, or remains flashing, see your dealer.


Service Electric Parking Brake Light


Metric


English


This light comes on briefly when the vehicle is turned on. If it does not come on then, have it fixed so it will be ready to warn if there is a problem. If the light comes on and stays on, there is a base brake problem.


Metric


English


This light comes on when the parking brake is applied. If the light continues flashing after the parking


The service electric parking brake light should come on briefly when the vehicle is in ON/RUN. If it does not come on, have the vehicle serviced by your dealer. If this light stays on, there is a problem with a system on the vehicle that is causing the parking


Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7576293) - 2015 - crc - 6/17/14


Black plate (22,1)


5-22


Instruments and Controls


system. If the ABS light stays on, or comes on again while driving, the vehicle needs service. A chime may also sound when the light comes on steady. If the ABS light is the only light on, the vehicle has regular brakes, but the antilock brakes are not functioning. If both the ABS and the brake system warning light are on, the vehicle's antilock brakes are not functioning and there is a problem with the regular brakes. See your dealer for service. See Brake System Warning Light on page 5-21 and Brake System Messages on page 5-34.


Traction Off Light


This light comes on briefly while starting the engine. If it does not, have the vehicle serviced by your dealer. If the system is working normally, the indicator light then turns off. The traction off light comes on when the Traction Control System (TCS) has been turned off by pressing and releasing the TCS/StabiliTrak button. This light and the StabiliTrak OFF light come on when StabiliTrak is turned off. If the TCS is off, wheel spin is not limited. Adjust driving accordingly. See Traction Control/Electronic Stability Control on page 9-37.


brake system to work at a reduced level. The vehicle can still be driven, but should be taken to a dealer as soon as possible. See Electric Parking Brake on page 9-35. If a message displays in the Driver Information Center (DIC), see Brake System Messages on page 5-34.


Antilock Brake System (ABS) Warning Light


This light comes on briefly when the engine is started. If the light does not come on, have it fixed so it will be ready to warn if there is a problem. If the light comes on while driving, stop as soon as it is safely possible and turn off the vehicle. Then start the engine again to reset the


Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7576293) - 2015 - crc - 6/17/14


Black plate (23,1)


Instruments and Controls


5-23


StabiliTrak® OFF Light


Traction Control System (TCS)/StabiliTrak® Light


This light comes on briefly while starting the engine. If it does not, have the vehicle serviced by your dealer. This light comes on when the StabiliTrak system is turned off. If StabiliTrak is off, the Traction Control System (TCS) is also off. If the StabiliTrak and TCS are off, the system does not assist in controlling the vehicle. Turn on the TCS and the StabiliTrak systems and the warning light turns off. See Traction Control/Electronic Stability Control on page 9-37.


This light comes on briefly when the engine is started. If the light does not come on, have the vehicle serviced by your dealer. If the system is working normally, the indicator light turns off. If the light is on and not flashing, the TCS and potentially the StabiliTrak system have been disabled. A DIC message may display. Check the DIC messages to determine which feature(s) is no longer functioning and whether the vehicle requires service.


If the indicator/warning light is on and flashing, the TCS and/or the StabiliTrak system is actively working. See Traction Control/Electronic Stability Control on page 9-37.


Engine Coolant Temperature Warning Light


This light comes on briefly while starting the vehicle. If it does not, have the vehicle serviced by the dealer. If the system is working normally the indicator light goes off.


Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7576293) - 2015 - crc - 6/17/14


Black plate (24,1)


5-24


Instruments and Controls


{ Caution


Tire Pressure Light


The engine coolant temperature warning light indicates that the vehicle has overheated. Driving with this light on can damage the engine and it may not be covered by the vehicle warranty. See Engine Overheating on page 10-27.


The engine coolant temperature warning light comes on when the engine has overheated. If this happens, pull over and turn off the engine as soon as possible. See Engine Overheating on page 10-27.


For vehicles with the Tire Pressure Monitor System (TPMS), this light comes on briefly when the engine is started. It provides information about tire pressures and the TPMS.


When the Light Is On Steady This indicates that one or more of the tires are significantly underinflated. A Driver Information Center (DIC) tire pressure message may also display. See Tire Messages on page 5-43. Stop as soon as possible, and inflate the tires to the pressure value shown on the Tire and Loading Information label. See Tire Pressure on page 10-55.


When the Light Flashes First and Then Is On Steady If the light flashes for about a minute and then stays on, there may be a problem with the TPMS. If the problem is not corrected, the light will come on at every ignition cycle. See Tire Pressure Monitor Operation on page 10-58.


Engine Oil Pressure Light


low can also damage the


{ Caution Lack of proper engine oil maintenance can damage the engine. Driving with the engine oil engine. The repairs would not be covered by the vehicle warranty. Check the oil level as soon as possible. Add oil if required, but if the oil level is within the operating range and the oil pressure is still low, have the vehicle serviced. Always follow the maintenance schedule for changing engine oil.


Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7576293) - 2015 - crc - 6/17/14


Black plate (25,1)


This light should come on briefly as the engine is started. If it does not come on, have the vehicle serviced by your dealer. If the light comes on and stays on, it means that oil is not flowing through the engine properly. The vehicle could be low on oil and might have some other system problem. See your dealer.


Low Fuel Warning Light


Instruments and Controls


5-25


This light is near the fuel gauge and comes on briefly when the ignition is turned on as a check to show it is working. It also comes on when the fuel tank is low on fuel. The light turns off when fuel is added. If it does not, have the vehicle serviced.


Security Light


If the light stays on and the engine does not start, there could be a problem with the theft-deterrent system. See Immobilizer Operation on page 2-18.


High-Beam On Light


This light comes on when the high-beam headlamps are in use. See Headlamp High/Low-Beam Changer on page 6-2.


The security light should come on briefly as the engine is started. If it does not come on, have the vehicle serviced by your dealer. If the system is working normally, the indicator light turns off.


Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7576293) - 2015 - crc - 6/17/14


Black plate (26,1)


5-26


Instruments and Controls


Lamps On Reminder


The light turns off when the cruise control is turned off. See Cruise Control on page 9-48.


Door Ajar Light


This light comes on when a door is open or not securely latched. Before driving, check that all doors are properly closed.


This light comes on when the exterior lamps are in use. See Exterior Lamp Controls on page 6-1.


Cruise Control Light


For vehicles with cruise control, the cruise control light is white when the cruise control is on and ready, and turns green when the cruise control is set and active.


Information Displays


Driver Information Center (DIC) The DIC displays are shown in the center of the instrument cluster in the Info application. See Instrument Cluster on page 5-7. The Info application is only available when the vehicle is in ON/RUN. The displays show the status of many vehicle systems. The controls for the DIC are on the right steering wheel control.


Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7576293) - 2015 - crc - 6/17/14


Black plate (27,1)


Instruments and Controls


5-27


w or x : Press to move up or down in a list. o or p : Press o to open application menus on the left. Press p to open interaction menus on the right. SEL (Select): Press to open a menu or select a menu item. Press and hold to reset values on certain screens. DIC Info Pages The following is the list of all possible DIC info displays. Depending on the vehicle, some may not be available. Current Speed: Displays the vehicle speed in either kilometers per hour (km/h) or miles per hour (mph). Trip A or B/Average Fuel Economy/Average Speed: Trip displays the current distance traveled, in either kilometers (km) or miles (mi), since the trip odometer was last reset. The trip odometer


can be reset by pressing and holding SEL while this display is active. Average Fuel Economy displays the approximate average liters per 100 kilometers (L/100 km) or miles per gallon (mpg). This number is calculated based on the number of L/100 km (mpg) recorded since the last time this menu item was reset. This number reflects only the approximate average fuel economy that the vehicle has right now, and will change as driving conditions change. The Average Fuel Economy can be reset by pressing and holding SEL while this display is active. Average Speed displays the average speed of the vehicle in kilometers per hour (km/h) or miles per hour (mph). This average is calculated based on the various vehicle speeds recorded since the last reset of this value. The average speed can be reset by pressing and holding SEL while this display is active.


Fuel Range/Instantaneous Fuel Economy: Fuel Range displays the approximate distance the vehicle can be driven without refueling. LOW will be displayed when the vehicle is low on fuel. The fuel range estimate is based on an average of the vehicle's fuel economy over recent driving history and the amount of fuel remaining in the fuel tank. Instantaneous Fuel Economy displays the current fuel economy in either liters per 100 kilometers (L/ 100 km) or miles per gallon (mpg). This number reflects only the approximate fuel economy that the vehicle has right now and changes frequently as driving conditions change. This display may also show the number of cylinders the vehicle is running on. See Active Fuel Management® on page 9-25.


Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7576293) - 2015 - crc - 6/17/14


Black plate (28,1)


5-28


Instruments and Controls


Oil Life: Displays an estimate of the oil's remaining useful life. If REMAINING OIL LIFE 99% is displayed, that means 99% of the current oil life remains. When the remaining oil life is low, the CHANGE ENGINE OIL SOON message will appear on the display. See Engine Oil Messages on page 5-37. The oil should be changed as soon as possible. See Engine Oil on page 10-12. In addition to the engine oil life system monitoring the oil life, additional maintenance is recommended in the Maintenance Schedule. See Maintenance Schedule on page 11-2. The Oil Life display must be reset after each oil change. It will not reset itself. Do not reset the Oil Life display accidentally at any time other than when the oil has just been changed. It cannot be reset accurately until the next oil change. To reset the engine oil life system, press and hold SEL for several


seconds while the Oil Life display is active. See Engine Oil Life System on page 10-18. Tire Pressure: Displays the approximate pressures of all four tires. Tire pressure is displayed in either kilopascal (kPa) or in pounds per square inch (psi). If the pressure is low, the value for that tire is shown in amber. See Tire Pressure Monitor System on page 10-57 and Tire Pressure Monitor Operation on page 10-58. Best Average Fuel Economy: Displays the average fuel economy, the best fuel economy over the selected distance, and a bar graph showing instantaneous fuel economy. Press p to change the selected distance. Fuel Used/Timer: Displays the approximate liters (L) or gallons (gal) of fuel that have been used since last reset. The fuel used can be reset by pressing and holding SEL while this display is active.


This display can also be used as a timer. To start/stop the timer, press p while this display is active and then SEL to start/stop the timer. The display will show the amount of time that has passed since the timer was last reset. To reset the timer to zero, press and hold SEL or use p to access the menu while this display is active. ECO Index: Aids the driver in determining how efficiently they are driving. This display may also show the number of cylinders the vehicle is running on. See Active Fuel Management® on page 9-25. Speed Limit: Displays sign information, which comes from a roadway database in the onboard navigation. Engine Hours/Lifetime Revs: Displays the total number of hours the engine has run. It also shows total engine revolutions divided by 10,000.


Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7576293) - 2015 - crc - 6/17/14


Black plate (29,1)


Head-Up Display (HUD)


{ Warning


If the HUD image is too bright, or too high in your field of view, it may take you more time to see things you need to see when it is dark outside. Be sure to keep the HUD image dim and placed low in your field of view.


If equipped with HUD, some information concerning the operation of the vehicle is projected onto the windshield. The HUD information appears as an image focused out toward the front of the vehicle.


Instruments and Controls


5-29


{ Caution


If you try to use the HUD image as a parking aid, you may misjudge the distance and damage your vehicle. Do not use the HUD image as a parking aid.


The HUD information can be displayed in various languages. The speedometer reading and other numerical values can be displayed in either English or metric units. The language selection is changed through the radio and the units of measurement is changed through the instrument cluster. See Vehicle Personalization on page 5-45 and “Settings” under Instrument Cluster on page 5-7. The HUD may display different alerts and information for vehicles equipped with these features: . Speedometer


Tachometer


. Manual Transmission Gear (If


Equipped)


. Manual Paddle Shift Gear


Indicator (If Equipped) These displays on the HUD are for use when using the manual paddle shift controls to shift the transmission. See “Manual Paddle Shift” in Automatic Transmission on page 9-27.


. Shift Light


This light is used for performance driving to indicate that the vehicle's best performance level has been reached to shift the transmission into the next higher gear. An arrow pointing up will light up on the display just prior to reaching the engine fuel cut-off mode.


. G-Force Gauge . Audio Information . Upcoming Maneuver from


OnBoard Navigation


Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7576293) - 2015 - crc - 6/17/14


Black plate (30,1)


5-30


Instruments and Controls


. Upcoming Maneuver from


OnStar Incoming Call


The HUD control is to the left of the steering wheel on the instrument panel. To adjust the HUD image so that items are properly displayed: 1. Adjust the driver seat. 2. Start the engine. 3. Adjust the HUD settings as


needed.


$ (Image Adjustment): Press down or lift up to adjust the vertical position of the HUD image in the windshield.


! (Display View): Press to select the display view. Each press will cause the display view to change to the next view. If vehicle messages are displayed, pressing the DIC select button may clear the message. See Driver Information Center (DIC) on page 5-26. D (Image Brightness): Lift up and hold to brighten the display. Press down and hold to dim the display. Hold down to turn the display off. The HUD image will automatically dim and brighten to compensate for outside lighting. The HUD brightness control can also be adjusted as needed. The HUD image can temporarily light up depending on the angle and position of the sunlight on the HUD display. This is normal. Polarized sunglasses could make the HUD image harder to see.


Display Views There are several HUD views that can be displayed:


English


Metric


Tour: Displays the vehicle speed, gear position, shift indicator, and driver mode.


Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7576293) - 2015 - crc - 6/17/14


Black plate (31,1)


Instruments and Controls


5-31


English


English


English


Metric


Metric


Metric


Sport: Displays the vehicle speed, a circular tachometer, gear position, shift indicator, and G-Force meter.


Track: Displays the vehicle speed, a linear tachometer, gear position, shift lights, and G-Force meter.


Timing: Displays a linear tachometer, gear position, shift lights, and performance or lap timer. The performance or lap timer content displayed depends on which feature is currently in use in the instrument cluster. See Instrument Cluster on page 5-7.


Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7576293) - 2015 - crc - 6/17/14


Black plate (32,1)


5-32


Instruments and Controls


Interrupts The interrupt information temporarily displays in any HUD view. Once displayed, HUD returns to the previous HUD view. Interrupts may include: . Audio Information . Navigation Turn-by-Turn


Information Incoming Call Information


. Vehicle Alerts


English


English


Metric


Metric


Audio: May display when a new source, radio station, or media type is selected.


Navigation: Turn-by-turn navigation information may be displayed when Navigation is active and an upcoming maneuver is pending. It appears until the maneuver is complete and then the HUD display returns to the previous view.


Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7576293) - 2015 - crc - 6/17/14


Black plate (33,1)


Instruments and Controls


5-33


English


English


Metric


Metric


Phone: May display when an incoming call is received from either OnStar or a Bluetooth connected phone. It appears momentarily until the call is answered or ignored.


Vehicle Alerts: Alerts can be dismissed in the instrument cluster. All alerts are not displayed in the HUD. Care of the HUD Clean the inside of the windshield to remove any dirt or film that could reduce the sharpness or clarity of the HUD image.


Clean the HUD lens with a soft cloth sprayed with glass cleaner. Wipe the lens gently, then dry it. HUD Troubleshooting Check that: . Nothing is covering the


HUD lens.


. HUD brightness setting is not


too dim or too bright.


. HUD is adjusted to the proper


height.


. Polarized sunglasses are


not worn.


. Windshield and HUD lens are


clean.


If the HUD image is not correct, contact your dealer. The windshield is part of the HUD system. See Windshield Replacement on page 10-37.


Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7576293) - 2015 - crc - 6/17/14


Black plate (34,1)


5-34


Instruments and Controls


Vehicle Messages Messages displayed on the DIC indicate the status of the vehicle or some action that may be needed to correct a condition. Multiple messages may display one after the other. The messages that do not require immediate action can be acknowledged and cleared by pressing SEL. The messages that require immediate action cannot be cleared until that action is performed. All messages should be taken seriously and clearing the messages does not correct the problem. The following are some of the vehicle messages that may be displayed depending on the vehicle content.


Battery Voltage and Charging Messages


BATTERY SAVER ACTIVE This message displays when the vehicle has detected that the battery voltage is dropping beyond a reasonable point. The battery saver system starts reducing features of the vehicle that may be noticed. At the point that features are disabled, this message displays. Turn off unnecessary accessories to allow the battery to recharge. LOW BATTERY This message is displayed when the battery voltage is low. See Battery on page 10-33. SERVICE BATTERY CHARGING SYSTEM This message is displayed when there is a fault in the battery charging system. Take the vehicle to your dealer for service.


Brake System Messages


BRAKE FLUID LOW This message is displayed when the brake fluid level is low. See Brake Fluid on page 10-32. RELEASE PARKING BRAKE This message is displayed if the Electric Parking Brake is on while the vehicle is in motion. See Electric Parking Brake on page 9-35. SERVICE BRAKE ASSIST This message may be displayed when there is a problem with the brake boost assist system. When this message is displayed, the brake boost assist motor might be heard operating and you might notice pulsation in the brake pedal. This is normal under these conditions. Take the vehicle to your dealer for service.


Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7576293) - 2015 - crc - 6/17/14


Black plate (35,1)


Instruments and Controls


5-35


SERVICE PARKING BRAKE This message is displayed when there is a problem with the parking brake. Take the vehicle to your dealer for service. STEP ON BRAKE TO RELEASE PARK BRAKE This message is displayed if you attempt to release the Electric Parking Brake without the brake pedal applied. See Electric Parking Brake on page 9-35.


Compass Messages Dashes may be displayed if the vehicle temporarily loses communication with the Global Positioning System (GPS).


Convertible Top Messages The following messages are for vehicles with a power convertible top.


ATTACH TRUNK PARTITION TO OPERATE TOP This message displays and a sound will be heard if the trunk partition is not in place. Open the hatch/trunk and make sure the trunk partition is secure and no objects are on the trunk partition. BATTERY VOLTAGE TOO LOW – TOP DISABLED This message displays when the battery voltage is too low to operate the convertible top. CLOSE TRUNK TO MOVE TOP This message displays if the trunk is open while you are trying to operate the convertible top. Make sure the trunk is closed before operating the convertible top. FOLDING TOP MOTION COMPLETE This message displays when the top successfully completes an open/ close cycle.


FOLDING TOP NOT SECURE COMPLETE TOP MOTION This message occurs if the top is not secure. Several beeps will sound. Complete the power open or power close cycle for the top. If it is not possible to move the top to a fully open or fully closed position, make sure that all objects are clear of the path of the top system components. ONLY MANUAL OPERATION OF TOP POSSIBLE This message indicates that the position of the top cannot be fully determined by the power convertible top controls. Try moving the top in the other direction. This message will also be displayed if a fault is detected by the convertible top controls. See “Manual Movement of Top” under Convertible Top on page 2-27.


Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7576293) - 2015 - crc - 6/17/14


Black plate (36,1)


5-36


Instruments and Controls


REDUCE VEHICLE SPEED TO OPERATE TOP This message is displayed when the vehicle speed exceeds or is approaching the convertible top speed cut off. TEMPERATURE TOO LOW – TOP DISABLED This message displays and a sound will be heard when the power convertible top button is pressed and it is too cold to operate the power convertible top. Move the vehicle to a warmer location and wait for the vehicle temperature to rise. This may take several hours depending on the initial vehicle temperature and the temperature of the new location. TOP NOT SECURE This message displays when the power convertible top is not completely opened or closed. Press and hold the convertible top button until the top is fully opened or closed. This is indicated by the


FOLDING TOP MOTION COMPLETE message being displayed and an audible indicator. TOP POWERING DOWN COMPLETE TOP MOTION This message displays when the power convertible top can no longer hold the top in an intermediate position. Top system components may move during this time based on external forces. Keep objects clear from the normal path of movement for the top system components. TOP SYSTEM OVERHEATED, PLEASE WAIT This message displays and a sound will be heard when the power convertible top button is pressed and the power convertible top pump motor temperature is overheated. Wait for the power convertible top pump motor to cool down before using the power convertible top.


VALET SWITCH ACTIVE – TOP DISABLED This message displays when Valet Mode is active.


Cruise Control Messages


CRUISE SET TO XXX This message displays when the cruise control is set and shows the speed it was set to. See Cruise Control on page 9-48.


Door Ajar Messages


DOOR OPEN A door open symbol will display on the DIC showing which door is open. If the vehicle has been shifted out of P (Park), a DOOR OPEN message will also be displayed. If the shift lever is in M (Manual Mode), the DOOR OPEN message will display if the vehicle starts to move. Close the door completely.


Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7576293) - 2015 - crc - 6/17/14


Black plate (37,1)


Instruments and Controls


5-37


HOOD OPEN This message will display along with a hood open symbol when the hood is open. Close the hood completely. TRUNK OPEN This message will display along with a symbol when the trunk is open. Close the trunk completely.


Engine Cooling System Messages


A/C OFF DUE TO HIGH ENGINE TEMP This message displays when the engine coolant becomes hotter than the normal operating temperature. To avoid added strain on a hot engine, the air conditioning compressor automatically turns off. When the coolant temperature returns to normal, the air conditioning compressor turns back on. The vehicle can continue to be driven.


If this message continues to appear, have the system repaired by your dealer as soon as possible to avoid damage to the engine. ENGINE OVERHEATING — IDLE ENGINE This message displays when the engine coolant temperature is too hot. Stop and allow the vehicle to idle until it cools down. ENGINE OVERHEATED — TURN VEHICLE OFF This message displays and a continuous chime sounds if the engine cooling system reaches unsafe temperatures for operation. Stop and turn off the vehicle as soon as it is safe to do so to avoid severe damage. This message clears when the engine has cooled to a safe operating temperature.


Engine Oil Messages


CHANGE ENGINE OIL SOON This message displays when the engine oil needs to be changed. When you change the engine oil, be sure to reset the Oil Life System. See Engine Oil Life System on page 10-18, Driver Information Center (DIC) on page 5-26, Engine Oil on page 10-12, and Maintenance Schedule on page 11-2. ENGINE OIL HOT, IDLE ENGINE This message displays when the engine oil temperature is too hot. Stop and allow the vehicle to idle until it cools down. ENGINE OIL LOW — ADD OIL On some vehicles, this message displays when the engine oil level may be too low. Check the oil level before filling to the recommended level. If the oil is not low and this


Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7576293) - 2015 - crc - 6/17/14


Black plate (38,1)


5-38


Instruments and Controls


message remains on, take the vehicle to your dealer for service. See Engine Oil on page 10-12. OIL PRESSURE LOW — STOP ENGINE This message displays if low oil pressure levels occur. Stop the vehicle as soon as safely possible and do not operate it until the cause of the low oil pressure has been corrected. Check the oil as soon as possible and have the vehicle serviced by your dealer. UPSHIFT NOW, ENGINE PROTECTION ACTIVE This message indicates the engine controls have taken action to prevent an oil starvation condition. This may reduce the available engine power, or on automatic transmission equipped vehicles force an upshift to a higher gear.


Engine Power Messages


Key and Lock Messages


ENGINE POWER IS REDUCED This message displays when the vehicle's engine power is reduced. Reduced engine power can affect the vehicle's ability to accelerate. If this message is on, but there is no reduction in performance, proceed to your destination. The performance may be reduced the next time the vehicle is driven. The vehicle may be driven at a reduced speed while this message is on, but maximum acceleration and speed may be reduced. Anytime this message stays on, the vehicle should be taken to your dealer for service as soon as possible.


Fuel System Messages


FUEL LEVEL LOW This message displays when the vehicle is low on fuel. Refuel as soon as possible.


NO REMOTE DETECTED This message displays when the transmitter battery may be weak. See “Starting the Vehicle with a Low Transmitter Battery” under Remote Keyless Entry (RKE) System Operation on page 2-3. NO REMOTE KEY WAS DETECTED PLACE KEY IN TRANSMITTER POCKET THEN START YOUR VEHICLE This message displays when trying to start the vehicle if an RKE transmitter is not detected. The transmitter battery may be weak. See “Starting the Vehicle with a Low Transmitter Battery” under Remote Keyless Entry (RKE) System Operation on page 2-3.


Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7576293) - 2015 - crc - 6/17/14


Black plate (39,1)


Instruments and Controls


5-39


NO REMOTE PRESS BRAKE TO RESTART This message displays if the RKE transmitter is no longer detected in the vehicle. Press the brake pedal to restart the vehicle. NUMBER OF KEYS PROGRAMMED This message displays when programming new keys to the vehicle. REMOTE LEFT IN VEHICLE This message displays when leaving the vehicle with the RKE transmitter still inside. REPLACE BATTERY IN REMOTE KEY This message displays when the battery in the RKE transmitter needs to be replaced.


Lamp Messages


AUTOMATIC LIGHT CONTROL ON/OFF This message is displayed when the automatic light control has been turned on or off. See Automatic Headlamp System on page 6-3. TURN SIGNAL ON This message is displayed if the turn signal has been left on. Turn off the turn signal.


Ride Control System Messages


COMPETITIVE DRIVING MODE This message displays and a sound will be heard when the Competitive Driving mode is selected. The instrument cluster light will be on when the Competitive Driving mode is selected. Launch Control is available when this mode is selected. The Traction Control System (TCS) will not be operating


while in the Competitive Driving mode. Adjust your driving accordingly. See Competitive Driving Mode on page 9-43, including the “Launch Control” information. MAXIMUM SPEED 129 km/h (80 MPH) This message displays when a malfunction is present in the Selective Ride Control system. The vehicle speed will be limited to a value determined by the vehicle when the shock absorber system has failed and the shocks are in their full soft mode. Have the vehicle serviced by your dealer as soon as possible. To acknowledge the message, press the SEL button. The message reappears every 10 minutes until this condition changes.


Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7576293) - 2015 - crc - 6/17/14


Black plate (40,1)


5-40


Instruments and Controls


PERF TRAC 1 – WET ACTIVE HANDLING ON This message displays and a sound will be heard when this Performance Traction Management mode is selected. The instrument cluster light will also be on when this mode is selected. Launch Control is available when this mode is selected. In this mode the Traction Control and StabiliTrak system are available but intended for use on wet race track conditions. Adjust your driving accordingly. This system is available only on Z06 models and models with FE4 – Z51 Performance Package and Magnetic Ride Control. See “Performance Traction Management” and “Launch Control” under Competitive Driving Mode on page 9-43 for more information about the use of this mode.


PERF TRAC 2 – DRY ACTIVE HANDLING ON This message displays and a sound will be heard when this Performance Traction Management mode is selected. The instrument cluster light will also be on when this mode is selected. Launch Control is available when this mode is selected. In this mode the Traction Control and StabiliTrak system are available but intended for use on dry race track conditions. Adjust your driving accordingly. This system is available only on Z06 models and models with FE4. See “Performance Traction Management” and “Launch Control” under Competitive Driving Mode on page 9-43 for more information about the use of this mode. PERF TRAC 3 – SPORT ACTIVE HANDLING ON This message displays and a sound will be heard when this Performance Traction Management mode is selected. The instrument cluster


light will also be on when this mode is selected. Launch Control is available when this mode is selected. In this mode the Traction Control and StabiliTrak system are available but intended for use on dry race track conditions. Adjust your driving accordingly. This system is available only on Z06 models and models with FE4. See “Performance Traction Management” and “Launch Control” under Competitive Driving Mode on page 9-43 for more information about the use of this mode. PERF TRAC 4 – SPORT ACTIVE HANDLING OFF This message displays and a sound will be heard when this Performance Traction Management mode is selected. The instrument cluster light will also be on when this mode is selected. Launch Control is available when this mode is selected. In this mode the Traction Control is available but intended for use on dry race track conditions.


Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7576293) - 2015 - crc - 6/17/14


Black plate (41,1)


Instruments and Controls


5-41


The StabiliTrak system is disabled when this mode is selected. This mode will require more driver skill than modes 1–3. Adjust your driving accordingly. This system is available only on Z06 models and models with FE4. See “Performance Traction Management” and “Launch Control” under Competitive Driving Mode on page 9-43 for more information about the use of this mode. PERF TRAC 5 – RACE ACTIVE HANDLING OFF This message displays and a sound will be heard when this Performance Traction Management mode is selected. The instrument cluster light will also be on when this mode is selected. Launch Control is available when this mode is selected. In this mode the Traction Control is available but intended for use on dry race track conditions. The StabiliTrak system is disabled when this mode is selected. This mode will require more driver skill


than modes 1–4. Adjust your driving accordingly. This system is available only on Z06 models and models with FE4. See “Performance Traction Management” and “Launch Control” under Competitive Driving Mode on page 9-43 for more information about the use of this mode. REAR AXLE OFF If this message is displayed, the Electronic Limited-Slip Rear (if equipped) is not operational. Drive with caution. Avoid high speeds, aggressive driving, and sharp cornering. The system could be overheated. Allow the system to cool. If this message remains on, see your dealer for service. The vehicle is safe to drive, however, continue to drive with caution. When this message is displayed, the vehicle’s handling capabilities will be reduced during severe maneuvers. StabiliTrak will be


affected. See Traction Control/ Electronic Stability Control on page 9-37. SERVICE STABILITRAK This message displays if there is a problem with the StabiliTrak system and the vehicle needs service. The StabiliTrak system light on the instrument cluster also turns on and a sound will be heard. See your dealer. When this message is displayed, the system is not working. Adjust your driving accordingly. See Traction Control/ Electronic Stability Control on page 9-37. SERVICE TRACTION SYSTEM If this message displays when you are driving, there is a problem with the Traction Control System (TCS) and the vehicle needs service. See your dealer. When this message is displayed, the system will not limit wheel spin. Adjust your driving accordingly.


Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7576293) - 2015 - crc - 6/17/14


Black plate (42,1)


5-42


Instruments and Controls


The TCS light on the instrument cluster will also turn on and a sound will be heard. When this message is displayed, the computer controlled systems will not assist the driver in controlling the vehicle. Have the system repaired by your dealer as soon as possible. Adjust your driving accordingly. See Traction Control/ Electronic Stability Control on page 9-37. To acknowledge the message, press the SEL button. SHOCKS INOPERATIVE This message displays when a malfunction is present in the Selective Ride Control system, which is causing the shocks to be in their full soft mode. This is a warning to the driver that the vehicle handling may be affected. Have the vehicle serviced by your dealer as soon as possible.


To acknowledge the message, press the SEL button. The message reappears every 10 minutes until this condition changes.


Airbag System Messages


SERVICE AIRBAG This message displays if there is a problem with the airbag system. Take the vehicle to your dealer for service.


Security Messages


THEFT ATTEMPTED This message displays if the vehicle detects a tamper condition.


Service Vehicle Messages


PROGRAM CLUSTER This message is displayed if there is a problem with the instrument cluster. Take the vehicle to your dealer for service.


SERVICE POWER STEERING This message is displayed if there is a problem with the power steering system and a chime may sound. Take the vehicle to your dealer for service. SERVICE REAR AXLE If there is a problem detected with the Electronic Limited-Slip Rear Axle, this message displays. When displayed, the system is not operational and driving should be adjusted accordingly. Take the vehicle to your dealer for service as soon as possible. When this message is displayed, the vehicle’s handling capabilities will be reduced during severe maneuvers. StabiliTrak will be affected. See Traction Control/ Electronic Stability Control on page 9-37.


Chevrolet Corvette Owner Manual (GMNA-Localizing-U.S./Canada/Mexico- 7576293) - 2015 - crc - 6/17/14


Black plate (43,1)


Instruments and Controls


5-43


SERVICE VEHICLE SOON This message is displayed if there is a problem with the vehicle. Take the vehicle to your dealer for service.


Starting the Vehicle Messages


PRESS BRAKE TO START VEHICLE This message is displayed when attempting to start an automatic transmission equipped vehicle without first pressing the brake pedal. PRESS CLUTCH TO START This message is displayed when attempting to start a manual transmission equipped vehicle without first pressing the clutch pedal.


SERVICE KEYLESS START SYSTEM This message is displayed if there is a problem with the pushbutton start system. Take the vehicle to your dealer for service.


Tire Messages


SERVICE TIRE MONITOR SYSTEM This message displays if there is a problem with the Tire Pressure Monitor System (TPMS). See Tire Pressure Monitor Operation on page 10-58. TIRE LEARNING ACTIVE This message displays when the system is learning new tires. See Tire Pressure Monitor Operation on page 10-58. TIRE LOW ADD AIR TO TIRE This message displays when the pressure in one or more of the tires is low.


This message also displays LEFT FRONT, RIGHT FRONT, LEFT REAR, or RIGHT REAR to indicate the location of the low tire. The low tire pressure warning light will also come on. See Tire Pressure Light on page 5-24. If a tire pressure message appears on the DIC, stop as soon as you can. Inflate the tires by adding air until the tire pressure is equal to the

Loading...
x