Download PDF Manual

If the airbag readiness light ever comes on and stays on, it means that something may be wrong with the airbag system. To help avoid injury to yourself or others, have the vehicle serviced right away. See Airbag Readiness


(Continued)


Warning (Continued)


Light 0 105 for more information, including important safety information.


Charging System Light


This light will come on briefly when the ignition is turned on, and the engine is not running, as a check to show it is working. It should go out when the engine is started. If it stays on, or comes on while driving, there may be a problem with the electrical charging system. Have it checked by your dealer. Driving while this light is on could drain the battery. If a short distance must be driven with the light on, turn off all accessories,


such as the radio and air conditioner, to help reduce the drain on the battery.


Malfunction Indicator Lamp (Check Engine Light) This light is part of the vehicle’s emission control on-board diagnostic system. If this light is on while the engine is running, a malfunction has been detected and the vehicle may require service. The light should come on to show that it is working when the ignition is in ON/RUN with the engine not running. See Ignition Positions 0 156.


Buick Encore Owner Manual 9234779) - 2016 - crc - 7/30/15


(GMNA-Localizing-U.S./Canada/Mexico-


Instruments and Controls


107


Malfunctions are often indicated by the system before any problem is noticeable. Being aware of the light and seeking service promptly when it comes on may prevent damage.


Caution


If the vehicle is driven continually with this light on, the emission control system may not work as well, the fuel economy may be lower, and the vehicle may not run smoothly. This could lead to costly repairs that might not be covered by the vehicle warranty.


Caution


Modifications to the engine, transmission, exhaust, intake, or fuel system, or the use of replacement tires that do not meet the original tire specifications, can cause this light to come on. This could lead to costly repairs not covered by the


(Continued)


Caution (Continued)


vehicle warranty. This could also affect the vehicle’s ability to pass an Emissions Inspection/ Maintenance test. See Accessories and Modifications 0 189.


If the light is flashing : A malfunction has been detected that could damage the emission control system and increase vehicle emissions. Diagnosis and service may be required. To help prevent damage, reduce vehicle speed and avoid hard accelerations and uphill grades. If the light continues to flash, find a safe place to park. Turn the vehicle off and wait at least 10 seconds before restarting the engine. If the light is still flashing, follow the previous guidelines and see your dealer for service as soon as possible.


If the light is on steady : A malfunction has been detected. Diagnosis and service may be required. Check the following: . A loose or missing fuel cap may cause the light to come on. See Filling the Tank 0 184. A few driving trips with the cap properly installed may turn the light off.


. Poor fuel quality can cause


inefficient engine operation and poor driveability, which may go away once the engine is warmed up. If this occurs, change the fuel brand. It may require at least one full tank of the proper fuel to turn the light off. See Fuel 0 183.


If the light remains on, see your dealer.


Buick Encore Owner Manual 9234779) - 2016 - crc - 7/30/15


(GMNA-Localizing-U.S./Canada/Mexico-


108


Instruments and Controls


Emissions Inspection and Maintenance Programs If the vehicle requires an Emissions Inspection/Maintenance test, the test equipment will likely connect to the vehicle's Data Link Connector (DLC).


The DLC is under the instrument panel to the left of the steering wheel. Connecting devices that are not used to perform an Emissions Inspection/Maintenance test or to service the vehicle may affect vehicle operation See Add-On Electrical Equipment 0 187. See your dealer if assistance is needed. The vehicle may not pass inspection if: . The light is on when the engine


is running.


. The light does not come on


when the ignition is in ON/RUN with the engine not running.


. Critical emission control systems


have not been completely diagnosed. If this happens, the vehicle would not be ready for inspection and might require several days of routine driving before the system is ready for inspection. This can happen if the 12-volt battery has recently been replaced or run down, or if the vehicle has been recently serviced.


See your dealer if the vehicle will not pass or cannot be made ready for the test.


Brake System Warning Light The vehicle brake system consists of two hydraulic circuits. If one circuit is not working, the remaining circuit can still work to stop the vehicle. For normal braking performance, both circuits need to be working


Metric


English


This light should come on briefly when the engine is started. If it does not come on then, have it fixed so it will be ready to warn you if there is a problem. When the ignition is on, the brake system warning light comes on when the parking brake is set. The light stays on if the parking brake does not fully release. If it stays on after the parking brake is fully released, there is a brake problem. Have the brake system inspected immediately.


{ Warning


The brake system might not be working properly if the brake system warning light is on.


(Continued)


Buick Encore Owner Manual 9234779) - 2016 - crc - 7/30/15


(GMNA-Localizing-U.S./Canada/Mexico-


Instruments and Controls


109


Warning (Continued)


Driving with the brake system warning light on can lead to a crash. If the light is still on after the vehicle has been pulled off the road and carefully stopped, have the vehicle towed for service.


If the light comes on while driving, a chime sounds. Pull off the road and stop. The pedal might be harder to push or go closer to the floor. It might also take longer to stop. If the light is still on, have the vehicle towed for service. See Towing the Vehicle 0 250.


Antilock Brake System (ABS) Warning Light


This light comes on briefly when the engine is started. If the light stays on, turn the ignition to LOCK/OFF or if the light comes on, stop as soon as possible and turn the ignition off. Then start the engine again to reset the system. If the light still stays on, or comes on again while driving, the vehicle needs service. See your dealer. If the regular brake system warning light is not on, the brakes will still work, but the antilock brakes will not work. If the regular brake system warning light is also on, the antilock brakes will not work and there is a problem with the regular brakes. See Brake System Warning Light 0 108. The ABS warning light will come on briefly when the ignition is turned to ON/RUN. This is normal. If the light does not come on then, have it fixed so it will be ready to warn if there is a problem.


Power Steering Warning Light


This light comes on briefly when the ignition is turned to ON/RUN as a check to show it is working. If it does not come on have the vehicle serviced by your dealer. If this light stays on, or comes on while driving, the system may not be working. If this happens, see your dealer for service.


Lane Departure Warning (LDW) Light


Buick Encore Owner Manual 9234779) - 2016 - crc - 7/30/15


(GMNA-Localizing-U.S./Canada/Mexico-


110


Instruments and Controls


If equipped, this light comes on briefly while starting the vehicle. If it does not come on, have the vehicle serviced. This light is green if LDW is on and ready to operate. This light changes to amber and flashes to indicate that the lane marking has been crossed without using a turn signal in that direction. See Lane Departure Warning (LDW) 0 181.


Vehicle Ahead Indicator


If equipped, this indicator will display green when a vehicle is detected ahead See Forward Collision Alert (FCA) System 0 178.


Traction Off Light


StabiliTrak® OFF Light


This light comes on briefly while starting the engine. If it does not, have the vehicle serviced by your dealer. If the system is working normally, the indicator light then turns off. The traction off light comes on when the Traction Control System (TCS) has been turned off by pressing and releasing the TCS/StabiliTrak button. This light and the StabiliTrak OFF light come on when StabiliTrak is turned off. If the TCS is off, wheel spin is not limited. Adjust driving accordingly. See Traction Control/Electronic Stability Control 0 169.


This light comes on briefly while starting the engine. If it does not, have the vehicle serviced by your dealer. This light comes on when the StabiliTrak system is turned off. If StabiliTrak is off, the Traction Control System (TCS) is also off. If StabiliTrak and TCS are off, the system does not assist in controlling the vehicle. Turn on the TCS and the StabiliTrak systems, and the warning light turns off. See Traction Control/Electronic Stability Control 0 169.


Buick Encore Owner Manual 9234779) - 2016 - crc - 7/30/15


(GMNA-Localizing-U.S./Canada/Mexico-


Traction Control System (TCS)/StabiliTrak® Light


Tire Pressure Light


The StabiliTrak or Traction Control System (TCS) indicator/warning light comes on briefly when the engine is started. If the light does not come on, have the vehicle serviced by your dealer. If the system is working normally, the indicator light turns off. If the light is on and not flashing, the TCS, and potentially the StabiliTrak system have been disabled. If the indicator/warning light is on and flashing, the TCS and/or the StabiliTrak system is actively working. See Traction Control/Electronic Stability Control 0 169.


For vehicles with the Tire Pressure Monitor System (TPMS), this light comes on briefly when the engine is started. It provides information about tire pressures and the TPMS.


When the Light Is On Steady This indicates that one or more of the tires are significantly underinflated. Stop as soon as possible, and inflate the tires to the pressure value shown on the Tire and Loading Information label. See Tire Pressure 0 229.


When the Light Flashes First and Then Is On Steady If the light flashes for about a minute and then stays on, there may be a problem with the TPMS. If the


Instruments and Controls


111


problem is not corrected, the light will come on at every ignition cycle. See Tire Pressure Monitor Operation 0 232.


Engine Oil Pressure Light


Caution


Lack of proper engine oil maintenance can damage the engine. Driving with the engine oil low can also damage the engine. The repairs would not be covered by the vehicle warranty. Check the oil level as soon as possible. Add oil if required, but if the oil level is within the operating range and the oil pressure is still low, have the vehicle serviced. Always follow the maintenance schedule for changing engine oil.


Buick Encore Owner Manual 9234779) - 2016 - crc - 7/30/15


(GMNA-Localizing-U.S./Canada/Mexico-


112


Instruments and Controls


Low Fuel Warning Light


Immobilizer Light


This light should come on briefly as the engine is started. If it does not come on, have the vehicle serviced by your dealer. If the light comes on and stays on, it means that oil is not flowing through the engine properly. The vehicle could be low on oil and might have some other system problem. See your dealer.


The immobilizer light should come on briefly as the engine is started. If it does not come on, have the vehicle serviced by your dealer. If the system is working normally, the indicator light turns off. If the light stays on and the engine does not start, there could be a problem with the immobilizer system. See Immobilizer Operation 0 34.


High-Beam On Light


Metric Shown, English Similar


This light comes on for a few seconds when the ignition is turned on as a check to indicate it is working. If it does not come on, have it fixed. The low fuel warning light comes on and a chime sounds periodically when the vehicle is low on fuel. The light turns off when fuel is added to the fuel tank.


Buick Encore Owner Manual 9234779) - 2016 - crc - 7/30/15


(GMNA-Localizing-U.S./Canada/Mexico-


This light comes on when the high-beam headlamps are in use. See Headlamp High/Low-Beam Changer 0 128.


Front Fog Lamp Light


This light comes on when the exterior lamps are in use. See Exterior Lamp Controls 0 127.


Cruise Control Light


For vehicles with front fog lamps, this light comes on when the front fog lamps are in use. The light goes out when the front fog lamps are turned off. See Front Fog Lamps 0 130 for more information.


Lamps On Reminder


For vehicles with cruise control, the cruise control light is white when the cruise control is on and ready, and turns green when the cruise control is set and active. The light turns off when the cruise control is turned off. See Cruise Control 0 171.


Instruments and Controls


113


Information Displays


Driver Information Center (DIC) The Driver Information Center (DIC) displays information about the vehicle. It also displays warning messages if a system problem is detected. See Vehicle Messages 0 116. All messages appear in the DIC display in the center of the instrument cluster. The vehicle may also have features that can be customized through the controls on the radio. See Vehicle Personalization 0 121. DIC Operation and Displays The DIC has different displays which can be accessed by using the DIC buttons on the turn signal lever. The DIC displays trip, fuel, and vehicle system information, and warning messages if a system problem is detected.


Buick Encore Owner Manual 9234779) - 2016 - crc - 7/30/15


(GMNA-Localizing-U.S./Canada/Mexico-


114


Instruments and Controls


The bottom of the DIC display shows the position of the shift lever and the odometer. It may also show the direction the vehicle is driving. In cold weather the DIC display may change slowly. This is normal and will move more quickly as the vehicle's interior temperature rises.


DIC Buttons


1. SET/CLR (Set/Clear): Press to


set or clear the menu item when it is displayed.


2. w / x (Band): Turn the band


to scroll through the menu items. A small marker will move across the bottom of the page as you scroll through the items. This shows where each page is in the menu.


3. MENU: Press to get to the Trip/


Fuel Menu and the Vehicle Information Menu. This button is also used to return to or exit the last screen displayed on the DIC.


Trip/Fuel Menu Items Press MENU on the turn signal lever until the Trip/Fuel Menu is displayed. Use w / x to scroll through the following menu items: . Digital Speedometer . Trip 1
. Trip 2
. Fuel Range . Fuel Economy . Average Vehicle Speed . Timer . Navigation


Digital Speedometer The speedometer shows how fast the vehicle is moving in either kilometers per hour (km/h) or miles per hour (mph). The speedometer cannot be reset.


Trip 1 and Trip 2
These displays show the current distance traveled, in either kilometers (km) or miles (mi), since the last reset for the trip odometer. The trip odometer can be reset to zero by pressing SET/CLR, or the trip odometer reset stem in the cluster, while the trip odometer display is showing.


Fuel Range This display shows the approximate distance the vehicle can be driven without refueling. The fuel range estimate is based on an average of the vehicle's fuel economy over recent driving history and the amount of fuel remaining in the fuel tank. Fuel range cannot be reset.


Fuel Economy This display shows instantaneous and average fuel economy in liters per 100 kilometers (L/100 km) or miles per gallon (mpg). The instantaneous fuel economy reflects only the approximate current fuel economy and changes


Buick Encore Owner Manual 9234779) - 2016 - crc - 7/30/15


(GMNA-Localizing-U.S./Canada/Mexico-


Instruments and Controls


115


frequently as driving conditions change. Unlike average economy, this display cannot be reset. Average fuel economy is calculated based on the number of L/ 100 km (mpg) recorded since the last time this menu item was reset. This number reflects only the approximate average fuel economy that the vehicle has right now, and will change as driving conditions change. The average fuel economy can be reset by pressing SET/CLR while the Average Fuel Economy display is showing.


Average Vehicle Speed This display shows the average speed of the vehicle in kilometers per hour (km/h) or miles per hour (mph). This average is calculated based on the various vehicle speeds recorded since the last reset of this value. The average speed can be reset by pressing SET/CLR while the Average Vehicle Speed display is showing.


Timer This display can be used as a timer. To start the timer, press SET/CLR while Timer is displayed. The display will show the amount of time that has passed since the timer was last reset, not including time the ignition is off. Time will continue to be counted as long as the ignition is on, even if another display is being shown on the DIC. The timer will record up to 99 hours, 59 minutes, and 59 seconds (99:59:59) after which the display will return to zero. To stop the timer, press SET/CLR briefly while Timer is displayed. To reset the timer to zero, press and hold SET/CLR.


Navigation This display is used for the Navigation System Turn-by-Turn guidance. See the infotainment manual, if the vehicle has navigation, for more information.


Vehicle Information Menu Items Press MENU on the turn signal lever until the Vehicle Information Menu is displayed. Use w / x to scroll through the following menu items: . Unit . Remaining Oil Life . Tire Pressure


Unit Move w / x to switch between metric or US when the Unit display is active. Press SET/CLR to confirm the setting. This will change the displays on the cluster and DIC to either metric or English (US) measurements.


Remaining Oil Life This display shows an estimate of the oil's remaining useful life. If REMAINING OIL LIFE 99% is displayed, that means 99% of the current oil life remains.


Buick Encore Owner Manual 9234779) - 2016 - crc - 7/30/15


(GMNA-Localizing-U.S./Canada/Mexico-


116


Instruments and Controls


When the remaining oil life is low, the CHANGE ENGINE OIL SOON message will appear on the display. See Engine Oil Messages 0 118. The oil should be changed as soon as possible. See Engine Oil 0 195. In addition to the Engine Oil Life System monitoring the oil life, additional maintenance is recommended in the Maintenance Schedule in this manual. See Maintenance Schedule 0 263 for more information. Remember, the Remaining Oil Life display must be reset after each oil change. It will not reset itself. Also, be careful not to reset the Remaining Oil Life display accidentally at any time other than when the oil has just been changed. It cannot be reset accurately until the next oil change. To reset the Engine Oil Life System, press SET/ CLR while the Remaining Oil Life display is active. See Engine Oil Life System 0 197.


Tire Pressure The display will show a vehicle with the approximate pressures of all four tires. Tire pressure is displayed in either kilopascal (kPa) or pounds per square inch (psi). See Tire Pressure Monitor System 0 231 and Tire Pressure Monitor Operation 0 232 for more information. Compass The vehicle has a compass display in the DIC. See Compass 0 97 for more information.


Vehicle Messages Messages displayed on the DIC indicate the status of the vehicle or some action that may be needed to correct a condition. Multiple messages may display one after the other. The messages that do not require immediate action can be acknowledged and cleared by pressing SET/CLR. The messages that require immediate action cannot be cleared until that action is performed. All messages should be taken seriously and clearing the messages does not correct the problem. The following are some of the vehicle messages that may be displayed depending on your vehicle content.


Buick Encore Owner Manual 9234779) - 2016 - crc - 7/30/15


(GMNA-Localizing-U.S./Canada/Mexico-


Battery Voltage and Charging Messages


BATTERY LOW START VEHICLE If this message displays, start the vehicle to prevent further draining of the battery. BATTERY SAVER ACTIVE This message displays when the vehicle has detected that the battery voltage is dropping beyond a reasonable point. The battery saver system starts reducing features of the vehicle that may be noticed. At the point that features are disabled, this message displays. Turn off unnecessary accessories to allow the battery to recharge. LOW BATTERY This message is displayed when the battery voltage is low. See Battery - North America 0 207.


Instruments and Controls


117


Brake System Messages


Door Ajar Messages


BRAKE FLUID LOW This message is displayed when the brake fluid level is low. See Brake Fluid 0 206. BRAKES OVERHEATED This message may display if the brakes are too hot. RELEASE PARKING BRAKE This message is displayed if the parking brake is applied. Release it before you attempt to drive. See Parking Brake 0 168 for more information. SERVICE BRAKE ASSIST This message is displayed when there is a problem with the brake assist system. Take the vehicle to your dealer.


DOOR(S) OPEN A vehicle symbol will be displayed on the DIC showing which door is open along with this message. Close the door completely. HOOD OPEN This message may display along with a hood open symbol when the hood is open. Close the hood completely. REAR ACCESS OPEN This message will display when the liftgate is open. Close the liftgate completely.


Engine Cooling System Messages ENGINE OVERHEATED — IDLE ENGINE This message displays when the engine coolant temperature is too hot. Stop and allow the vehicle to idle until it cools down.


Buick Encore Owner Manual 9234779) - 2016 - crc - 7/30/15


(GMNA-Localizing-U.S./Canada/Mexico-


118


Instruments and Controls


ENGINE OVERHEATED — STOP ENGINE This message displays and a continuous chime sounds if the engine cooling system reaches unsafe temperatures for operation. Stop and turn off the vehicle as soon as it is safe to do so to avoid severe damage. This message clears when the engine has cooled to a safe operating temperature.


Engine Oil Messages


CHANGE ENGINE OIL SOON This message displays when the engine oil needs to be changed. When the engine oil is changed, be sure to reset the Oil Life System. See Engine Oil Life System 0 197, Driver Information Center (DIC) 0 113, Engine Oil 0 195, and Maintenance Schedule 0 263.


ENGINE OIL HOT, IDLE ENGINE This message displays when the engine oil temperature is too hot. Stop and allow the vehicle to idle until it cools down. ENGINE OIL LOW ADD OIL On some vehicles, this message displays when the engine oil level may be too low. Check the oil level before filling to the recommended level. If the oil is not low and this message remains on, take the vehicle to your dealer for service. See Engine Oil 0 195.


Engine Power Messages


ENGINE POWER IS REDUCED This message displays when the vehicle's engine power is reduced. Reduced engine power can affect the vehicle's ability to accelerate. If this message is on, but there is no reduction in performance, proceed to your destination. The performance may be reduced the next time the vehicle is driven. The vehicle may be driven at a reduced


speed while this message is on, but maximum acceleration and speed may be reduced. Anytime this message stays on, the vehicle should be taken to your dealer for service as soon as possible.


Fuel System Messages


FUEL LEVEL LOW This message displays when the vehicle is low on fuel. Refuel as soon as possible. TIGHTEN GAS CAP This message displays when the fuel cap is not on tight. Tighten the fuel cap.


Object Detection System Messages


FORWARD COLLISION ALERT OFF If equipped with the Forward Collision Alert (FCA) system, this message may display if the FCA


Buick Encore Owner Manual 9234779) - 2016 - crc - 7/30/15


(GMNA-Localizing-U.S./Canada/Mexico-


system cannot activate due to a temporary condition. See Forward Collision Alert (FCA) System 0 178. FRONT CAMERA BLOCKED, CLEAN WINDSHIELD This message displays when the Lane Departure Warning (LDW) and Forward Collision Alert (FCA) systems are disabled because the camera view is blocked and cannot operate properly. It may also activate during heavy rain or due to road spray. To clean the system, clean the outside of the windshield area in front of the LDW/FCA camera sensor. LANE DEPARTURE WARNING UNAVAILABLE If equipped with the Lane Departure Warning (LDW) system, this message may display if the LDW system cannot activate due to a temporary condition. See Lane Departure Warning (LDW) 0 181.


Instruments and Controls


119


PARK ASSIST OFF This message displays when the parking assist system has been turned off or when there is a temporary condition causing the system to be disabled. See Parking Assist 0 176. PARK ASSIST FAULT CLEAN BUMPER This message displays if snow, mud, ice, or dirt is blocking the sensors on the bumpers. Clean the bumpers. SERVICE FRONT CAMERA If this message remains on after continued driving, the vehicle needs service. Do not use the Lane Departure Warning (LDW) and Forward Collision Alert (FCA) features. Take the vehicle to your dealer. SERVICE PARKING ASSIST This message displays if there is a problem with the Front and Rear Parking Assist (FRPA) system. Do not use this system to help you park. See Parking Assist 0 176.


SERVICE SIDE DETECTION SYSTEM If this message remains on after continued driving, the vehicle needs service. Side Blind Zone Alert (SBZA) and Rear Cross Traffic Alert (RCTA) features will not work. Take the vehicle to your dealer. SIDE BLIND ZONE ALERT OFF This message indicates that the driver has turned the Side Blind Zone Alert (SBZA) system off. SIDE DETECTION SYSTEM UNAVAILABLE This message indicates that Side Blind Zone Alert (SBZA) and Rear Cross Traffic Alert (RCTA) are disabled either because the sensor is blocked and cannot detect vehicles in the blind zone, or the vehicle is passing through an open area, such as the desert, where there is insufficient data for operation. This message may also activate during heavy rain or due to road spray. The vehicle does not


Buick Encore Owner Manual 9234779) - 2016 - crc - 7/30/15


(GMNA-Localizing-U.S./Canada/Mexico-


120


Instruments and Controls


need service. For cleaning, see “Washing the Vehicle” under Exterior Care 0 253.


Ride Control System Messages


ALL WHEEL DRIVE OFF If your vehicle has the All-Wheel Drive (AWD) system, this message displays when the rear drive system is overheating. This message turns off when the rear drive system cools down. If the warning message stays on for a while, you need to reset the warning message. To reset the warning message, turn the ignition off and then back on again. If the message stays on, see your dealer right away. See All-Wheel Drive 0 167 for more information. SERVICE ALL WHEEL DRIVE SYSTEM If your vehicle has the All-Wheel Drive (AWD) system, this message displays if a problem occurs with this system. If this message appears, stop as soon as possible and turn off the vehicle. Restart the


vehicle and check for the message on the DIC display. If the message is still displayed or appears again when you begin driving, the AWD system needs service. See your dealer. TRACTION CONTROL OFF This message displays when the Traction Control System (TCS) is turned off. Adjust your driving accordingly. TRACTION CONTROL ON This message displays when the Traction Control System (TCS) is first turned on. See Traction Control/ Electronic Stability Control 0 169 for more information.


Tire Messages


SERVICE TIRE MONITOR SYSTEM This message displays if there is a problem with the Tire Pressure Monitor System (TPMS). See Tire Pressure Monitor Operation 0 232.


TIRE LEARNING ACTIVE This message displays when the system is learning new tires. See Tire Pressure Monitor Operation 0 232. TIRE PRESSURE LOW ADD AIR TO TIRE On vehicles with the Tire Pressure Monitor System (TPMS), this message displays when the pressure in one or more of the vehicle's tires is low. The low tire pressure warning light will also come on. See Tire Pressure Light 0 111. If a tire pressure message displays, inflate the tires until the tire pressure is equal to the values shown on the Tire and Loading Information label. See Tires 0 222, Vehicle Load Limits 0 152, and Tire Pressure 0 229. More than one tire pressure message can be received at a time. The DIC also shows the tire pressure values. See Driver Information Center (DIC) 0 113.


Buick Encore Owner Manual 9234779) - 2016 - crc - 7/30/15


(GMNA-Localizing-U.S./Canada/Mexico-


Transmission Messages


SERVICE TRANSMISSION This message displays if there is a problem with the transmission. See your dealer. TRANSMISSION HOT — IDLE ENGINE This message displays and a chime sounds if the transmission fluid in the vehicle gets hot. Driving with the transmission fluid temperature high can cause damage to the vehicle. Stop the vehicle and let it idle to allow the transmission to cool. This message clears when the fluid temperature reaches a safe level.


Instruments and Controls


121


Vehicle Personalization Use the audio system controls to access the personalization menus for customizing vehicle features. The following are all possible personalization features. Depending on the vehicle, some may not be available CONFIG (Configuration) : Press to access the Configuration Settings menu. TUNE/MENU : Press the center of the knob or outer ring for radios with navigation to enter the menus and select menu items. Turn the knob or outer ring to scroll through the menus. / BACK : Press to exit or move backward in a menu.


Entering the Personalization Menus 1. Press CONFIG to access the Configuration Settings menu. The key must be in the ON/ RUN position.


2. Turn the TUNE/MENU knob or


outer ring to highlight the Vehicle Settings menu.


3. Press the TUNE/MENU knob


or outer ring to select the menu.


4. Press / BACK to confirm the


selection and move back to the last menu.


The following list of menu items may be available: . Languages . Time and Date . Radio Settings . Phone Settings . Display Settings . Vehicle Settings Languages Select Languages, then select from the available language(s). Time and Date Select the Time and Date menu and the following may display: . Set Time


Buick Encore Owner Manual 9234779) - 2016 - crc - 7/30/15


(GMNA-Localizing-U.S./Canada/Mexico-


122


Instruments and Controls


. Set Date . 12 hr / 24 hr Format


Set Time Select to manually set the time. Turn TUNE/MENU knob or outer ring to change the number, then press the knob or outer ring to confirm and go to the next number.


Set Date Select to manually set the date. Turn TUNE/MENU knob or outer ring to change the number, then press the knob or outer ring to confirm and go to the next number.


12 hr / 24 hr Format Select to set the 12/24 hour format. Select 12 hr or 24 hr. Radio Settings Select Radio Settings and the following may display: . Auto Volume . Maximum Startup Volume . Radio Favorites


Auto Volume The auto volume feature automatically adjusts the radio volume to compensate for road and wind noise as the vehicle speeds up or slows down, so that the volume level is consistent. Select Off, Low, Medium, or High.


Maximum Startup Volume Select to manually set the startup volume of the radio. Turn the TUNE/MENU knob or outer ring to increase or decrease the value.


Radio Favorites Select to manually set the number of favorite pages. Select 1−6. Phone Settings Select Phone Settings and the following may display: . Bluetooth . Return to Factory Settings


Bluetooth The following list of menu items may be available: . Activation . Device List . Pair Device . Change Bluetooth Code


Activation When on, the system will allow a Bluetooth device to connect. Select On or Off.


Device List Allows the management of a Bluetooth device. Select Connect, Separate, or Delete.


Pair Device Allows the pairing of a new Bluetooth device. See “Bluetooth” in the infotainment manual.


Change Bluetooth Code Manually change or set the code.


Buick Encore Owner Manual 9234779) - 2016 - crc - 7/30/15


(GMNA-Localizing-U.S./Canada/Mexico-


Return to Factory Settings Select Return to Factory Settings to return Bluetooth to the default settings. Select Yes or No. Display Settings Select Display Settings and the following may display: . Home Page Menu . Display Off Home Page Menu Select Home Page Menu and the following may display: . Customize . Sort . Restore Home Page Defaults


Customize Select what icons will be available on the Home Page. Turn the TUNE/MENU knob or outer ring to select an icon, then press the knob or outer ring.


Instruments and Controls


123


Sort This allows the first Home Page to be customized. See “Home Page” under “Using the System” in the infotainment manual.


Restore Home Page Defaults Select Restore Home Page Defaults to return the Home Page to the default settings. Select Yes or No Display Off Select to turn the display off. Press or turn any faceplate button to turn the display on. Vehicle Settings The following list of menu items may be available: . Climate and Air Quality . Comfort and Convenience . Collision Detection System . Lighting . Power Door Locks . Remote Lock/Unlock/Start . Return to Factory Settings?


Climate and Air Quality If equipped, select the Climate and Air Quality menu and the following may display: . Auto Fan Speed . Air Conditioning Mode . Remote Start Auto Heat Seats . Auto Defog . Auto Rear Defog


Auto Fan Speed This allows the selection of the automatic fan speed. This feature sets the climate control fan speed to maintain the interior temperature. Select High, Medium, or Low.


Air Conditioning Mode When on, the Air Conditioning will come on when the vehicle is started. Select On, Off, or Last Setting.


Remote Start Auto Heat Seats On vehicles with remote start and heated seats, the heated seats can be set to on or off.


Buick Encore Owner Manual 9234779) - 2016 - crc - 7/30/15


(GMNA-Localizing-U.S./Canada/Mexico-


124


Instruments and Controls


Select On or Off.


Auto Defog When selected and high humidity is detected, the climate control system may adjust to outside air supply and turn on the air conditioner or the heater. The fan speed may slightly increase to help prevent fogging. When high humidity is no longer detected, the system will return to its prior operation. Select or Deselect.


Auto Rear Defog When selected, this feature turns on the rear defogger at vehicle start when the interior temperature is cold and fog is likely. The auto rear defog function can be disabled by pressing 1. When off, the feature can be turned on by pressing 1. See “Rear Window Defogger” under Climate Control Systems 0 135. Select or Deselect.


Comfort and Convenience If equipped, select the Comfort and Convenience menu and the following may display: . Easy Exit Driver Seat . Memory Remote Recall . Chime Volume . Button Volume . Reverse Tilt Mirror . Auto Reverse Gear Wiper


Easy Exit Driver Seat This feature moves the seat rearward allowing the driver more room to exit the vehicle. Select On or Off.


Memory Remote Recall If equipped, this feature recalls the driver seat and outside mirrors to previously stored Remote Keyless Entry (RKE) transmitter memory positions when entering the vehicle. See Memory Seats 0 45. Select On or Off.


Chime Volume This allows the selection of the chime volume level. Select Normal or High.


Button Volume This allows the selection of the volume level when a button is pressed. Select Normal or High.


Reverse Tilt Mirror This feature tilts the outside mirrors when the vehicle is in R (Reverse) allowing the driver to view the curb for parallel parking. Select On or Off.


Auto Reverse Gear Wiper When selected, the rear wiper will intermittent wipe when the vehicle is shifted into R (Reverse). When deselected, the rear wiper will continuously wipe when the vehicle is shifted into R (Reverse). Select or Deselect.


Buick Encore Owner Manual 9234779) - 2016 - crc - 7/30/15


(GMNA-Localizing-U.S./Canada/Mexico-


Collision Detection System Select the Collision Detection System menu and the following may display: . Side Blind Zone Alert


Side Blind Zone Alert This allows this feature to be turned on or off. See Side Blind Zone Alert (SBZA) 0 179. Select On or Off. Lighting Select the Lighting menu and the following may display: . Exit Lighting . Vehicle Locator Lights


Exit Lighting This allows the selection of how long the exterior lamps stay on when leaving the vehicle when it is dark outside. Select Off, 30 Seconds, 1 Minute, or 2 Minutes.


Instruments and Controls


125


Vehicle Locator Lights This allows the headlamps, parking lamps, taillamps, and most of the interior lamps to turn on briefly when K is pressed. Select or Deselect. Power Door Locks Select Power Door Locks and the following may display: . Open Door Anti Lock Out . Auto Door Unlock . Delayed Door Lock


Open Door Anti Lock Out When selected, this feature will keep the driver door from locking when the door is open. When deselected, the Delayed Door Lock menu will be available and the door will lock as programmed through this menu. Select or Deselect.


Auto Door Unlock This allows selection of which of the doors will automatically unlock when the vehicle is shifted into P (Park).


Select All Doors, Driver Door, or OFF.


Delayed Door Lock When selected, this feature will delay the locking of the doors after the last door is closed. Select or Deselect. Remote Lock/Unlock/Start Select Remote Lock/Unlock/Start and the following may display: . Remote Unlock Feedback . Remote Lock Feedback . Remote Door Unlock


Remote Unlock Feedback This allows selection of what type of feedback is given when unlocking the vehicle with the RKE transmitter. Select Flash Lights or Off.


Remote Lock Feedback This allows selection of what type of feedback is given when locking the vehicle with the RKE transmitter. Select Lights and Horn, Lights Only, Horn Only, or Off.


Buick Encore Owner Manual 9234779) - 2016 - crc - 7/30/15


(GMNA-Localizing-U.S./Canada/Mexico-


126


Instruments and Controls


Remote Door Unlock This allows selection of which doors will unlock when pressing K on the RKE transmitter. When set to Driver Door, the driver door will unlock the first time K is pressed and all doors will unlock when K is pressed a second time. When set to All Doors, all of the doors will unlock at the first press of K. Select Driver Door or All Doors. Return to Factory Settings? Select Return to Factory Settings? to return all vehicle personalization to the default settings. Select Yes or No


Buick Encore Owner Manual 9234779) - 2016 - crc - 7/30/15


(GMNA-Localizing-U.S./Canada/Mexico-


Lighting


Exterior Lighting


Exterior Lighting


Exterior Lamp Controls


Exterior Lamp Controls . . . . . . . 127
Headlamp High/Low-Beam


Changer . . . . . . . . . . . . . . . . . . . . 128
Flash-to-Pass . . . . . . . . . . . . . . . . 128
Daytime Running


Lamps (DRL) . . . . . . . . . . . . . . . 128


Automatic Headlamp


System . . . . . . . . . . . . . . . . . . . . . . 129
Hazard Warning Flashers . . . . . 129
Turn and Lane-Change


Signals . . . . . . . . . . . . . . . . . . . . . . 130
Front Fog Lamps . . . . . . . . . . . . . 130


Interior Lighting


Instrument Panel Illumination


Control . . . . . . . . . . . . . . . . . . . . . . 131
Courtesy Lamps . . . . . . . . . . . . . . 131
Dome Lamps . . . . . . . . . . . . . . . . . 131
Reading Lamps . . . . . . . . . . . . . . 132


Lighting Features


Entry Lighting . . . . . . . . . . . . . . . . 132
Exit Lighting . . . . . . . . . . . . . . . . . . 132
Battery Power Protection . . . . . 132


The exterior lamp control is to the left of the steering column on the instrument panel. There are four positions: O (Off) : Briefly turn to this position to turn the automatic lamp control off or on again. AUTO (Automatic) : Turns the headlamps on automatically at normal brightness, together with the parking lamps, taillamps, license plate lamps, sidemarker lamps, and instrument panel lights.


Lighting


127


; (Parking Lamps) : Turns on the parking lamps, taillamps, license plate lamps, sidemarker lamps, and instrument panel lights. 5 (Headlamps) : Turns on the headlamps, parking lamps, taillamps, license plate lamps, sidemarker lamps, and instrument panel lights. A warning chime sounds if the driver door is opened when the ignition switch is off and the headlamps are on. # (Front Fog Lamps, If Equipped) : Pess to turn the lamps on or off. See Front Fog Lamps 0 130. When the lights are on, ; will be lit. See Lamps On Reminder 0 113.


Buick Encore Owner Manual 9234779) - 2016 - crc - 7/30/15


(GMNA-Localizing-U.S./Canada/Mexico-


128


Lighting


Headlamp High/ Low-Beam Changer


3 (Headlamp High/Low-Beam Changer) : Push the turn signal lever away from you and release, to turn the high beams on. To return to low beams, push the lever again or pull it toward you and release.


. The engine is running. When the DRL are on, only the low-beam headlamps, at a reduced level of brightness, will be on. The taillamps, sidemarker, instrument panel, and other lamps will not be on. The headlamps automatically change from DRL to the regular headlamps depending on the darkness of the surroundings. The other lamps that come on with the headlamps will also come on. When it is bright enough outside, the headlamps go off and the DRL come on. To turn the DRL off or on again, turn the exterior lamp control to the off position and then release. For vehicles first sold in Canada, the DRL cannot be turned off.


This indicator light turns on in the instrument cluster when the high-beam headlamps are on.


Flash-to-Pass To flash the high beams, pull the turn signal lever all the way toward you. Then release it.


Daytime Running Lamps (DRL) Daytime Running Lamps can make it easier for others to see the front of your vehicle during the day. Fully functional DRL are required on all vehicles first sold in Canada. A light sensor on top of the instrument panel makes the DRL work, so be sure it is not covered. The DRL system makes the low-beam headlamps come on at a reduced brightness when the following conditions are met: . The ignition is in the ON/


RUN mode.


. The exterior lamp control is


in AUTO.


Buick Encore Owner Manual 9234779) - 2016 - crc - 7/30/15


(GMNA-Localizing-U.S./Canada/Mexico-


Automatic Headlamp System When it is dark enough outside and the exterior lamp control is in the automatic position, the headlamps come on automatically. See Exterior Lamp Controls 0 127.


The vehicle has a light sensor on top of the instrument panel. Make sure it is not covered, or the headlamps will be on when they are not needed. The system may also turn on the headlamps when driving through a parking garage or tunnel.


If the vehicle is started in a dark garage, the automatic headlamp system comes on immediately. If it is light outside when the vehicle leaves the garage, there is a slight delay before the automatic headlamp system changes to the DRL. During that delay, the instrument cluster may not be as bright as usual. Make sure the instrument panel brightness control is in the full bright position. See Instrument Panel Illumination Control 0 131. Lights On with Wipers If the windshield wipers are activated in daylight with the engine on, and the exterior lamp control is in AUTO, the headlamps, parking lamps, and other exterior lamps come on. The transition time for the lamps coming on varies based on wiper speed. When the wipers are not operating, these lamps turn off. Move the exterior lamp control to P or ; to disable this feature.


Lighting


129


Hazard Warning Flashers


| (Hazard Warning Flasher) : Press and momentarily hold this button to make the front and rear turn signal lamps flash on and off. This warns others that you are having trouble. Press and momentarily hold again to turn the flashers off.


Buick Encore Owner Manual 9234779) - 2016 - crc - 7/30/15


(GMNA-Localizing-U.S./Canada/Mexico-


130


Lighting


Turn and Lane-Change Signals


burned out bulbs. If a bulb is not burned out, check the fuse. See Fuses and Circuit Breakers 0 215.


Front Fog Lamps


If the high-beam headlamps are turned on, the fog lamps will turn off. If the high-beam headlamps are turned off, the fog lamps will turn back on again. Some localities have laws that require the headlamps to be on along with the fog lamps.


Move the lever all the way up or down to signal a turn. An arrow on the instrument cluster will flash in the direction of the turn or lane change. Raise or lower the lever until the arrow starts to flash to signal a lane change. The turn signal flashes three times. The lever returns to its starting position when it is released. If after signaling a turn or lane change the arrow flashes rapidly or does not come on, a signal bulb may be burned out. Replace any


If the vehicle is equipped with front fog lamps, the button is on the outboard side of the instrument panel. The ignition must be on to turn on the fog lamps. # (Front Fog Lamps) : Press to turn the fog lamps on or off. An indicator light on the instrument cluster comes on when the fog lamps are on. The fog lamps come on together with the parking lamps.


Buick Encore Owner Manual 9234779) - 2016 - crc - 7/30/15


(GMNA-Localizing-U.S./Canada/Mexico-


Interior Lighting


Instrument Panel Illumination Control


Courtesy Lamps The courtesy lamps come on automatically when any door is opened and the dome lamp is in the door position.


Dome Lamps


Front and Rear Dome Lamps


Lighting


131


H (Door) : When the button is returned to the middle position, the lamps turn on automatically when a door is opened. ' (On) : Press to turn on the dome lamps.


This feature controls the brightness of the instrument panel controls and infotainment display screen. The thumbwheel is to the left of the steering column on the instrument panel. D (Instrument Panel Brightness) : Move the thumbwheel up or down and hold, to brighten or dim the instrument panel controls and infotainment display screen.


The front dome lamp controls are in the overhead console. ( (Dome Lamp Override) : Press to turn the lamps off, even when a door is open.


The rear dome lamp controls are in the headliner above the rear seats. 9 (Dome Lamp Override) : Press to turn the lamps off, even when a door is open. H (Door) : When the button is returned to the middle position, the lamps turn on automatically when a door is opened.


Buick Encore Owner Manual 9234779) - 2016 - crc - 7/30/15


(GMNA-Localizing-U.S./Canada/Mexico-


132


Lighting


R (On) : Press to turn on the dome lamps.


Reading Lamps


The front reading lamps are in the overhead console. # or $ (Reading Lamps) : Press to turn each lamp on or off.


Lighting Features


Entry Lighting The headlamps, parking lamps, taillamps, back-up lamps, and most of the interior lamps turn on briefly at night or in areas of limited lighting when K is pressed on the Remote Keyless Entry (RKE) transmitter. After about 30 seconds the exterior lamps turn off, and then the dome and remaining interior lamps will dim to off. Entry lighting can be disabled manually by changing the ignition out of the OFF position, or by pressing the RKE transmitter Q button. This feature can be changed. See “Vehicle Locator Lights” under Vehicle Personalization 0 121.


Exit Lighting The headlamps, taillamps, parking lamps, back‐up lamps, and license plate lamps come on at night, or in areas with limited lighting, when the key is removed from the ignition. The dome lamps also come on when the key is removed from the ignition. The exterior lamps and dome lamps remain on after the door is closed for a set amount of time, then automatically turn off. The exterior lamps turn off immediately by turning the exterior lamps control off. The exit lighting feature can be changed. See Vehicle Personalization 0 121.


Battery Power Protection The battery saver feature protects against draining the vehicle's battery. If some interior lamps or the manual parking lamps or headlamps are left on and the ignition is turned off, the


Buick Encore Owner Manual 9234779) - 2016 - crc - 7/30/15


(GMNA-Localizing-U.S./Canada/Mexico-


Lighting


133


battery rundown protection system automatically turns the lamp off after some time. To restart the 10 minute timer, turn the exterior lamp control to the O position and then back to the ; or 5 position. To keep the lamps on for more than 10 minutes, the ignition must be in the ACC/ ACCESSORY or ON/RUN position.


Buick Encore Owner Manual 9234779) - 2016 - crc - 7/30/15


(GMNA-Localizing-U.S./Canada/Mexico-


Infotainment System


134
Infotainment System


Introduction


Infotainment . . . . . . . . . . . . . . . . . . 134


Introduction


Infotainment See the infotainment manual for information on the radio, audio players, phone, navigation system, and voice or speech recognition. It also includes information on settings.


Buick Encore Owner Manual 9234779) - 2016 - crc - 7/30/15


(GMNA-Localizing-U.S./Canada/Mexico-


Climate Controls


Climate Control Systems


Climate Controls


135


The heating, cooling, defrosting, and ventilation for the vehicle can be controlled with this system.


Climate Control Systems


Climate Control Systems . . . . . 135
Dual Automatic Climate


Control System . . . . . . . . . . . . . 138


Air Vents


Air Vents . . . . . . . . . . . . . . . . . . . . . 142


Maintenance


Air Intake . . . . . . . . . . . . . . . . . . . . . 142
Passenger Compartment Air


Filter . . . . . . . . . . . . . . . . . . . . . . . . 142


1. Temperature Control 2. Air Delivery Modes 3. Fan Control 4. Defrost 5. Rear Window Defogger 6. Air Conditioning or Comfort/


Eco Air Conditioning


7. Recirculation


Climate Control Influence on Stop/ Start Operation and Fuel Economy (If Equipped) The climate control system depends on other vehicle systems for heat and power input. Certain climate control settings can lead to higher fuel usage and/or fewer auto stops.


Buick Encore Owner Manual 9234779) - 2016 - crc - 7/30/15


(GMNA-Localizing-U.S./Canada/Mexico-


136


Climate Controls


The following are climate control settings that use more fuel: . Comfort air conditioning mode. . The defrost mode. . Extreme temperature settings,


such as LO or HI.


. High fan speed settings. To help reduce fuel usage: . Use the full automatic control as


described under “Automatic Operation” following.


. Use eco air conditioning, instead


of the comfort air conditioning.


. Select a temperature setting that


is higher in hot weather and lower in cold weather.


. Turn off the air conditioning


when it is not needed.


. Only use defrost to clear the


windows.


9 (Fan Control) : Turn the knob clockwise or counterclockwise to increase or decrease the fan speed. Turn the knob completely to 0 to turn off the fan and air conditioning compressor.


Temperature Control : Turn the knob clockwise or counterclockwise to increase or decrease the temperature setting. Air Delivery Mode Control : Press [, Y , or X to change the direction of the airflow. Air delivery mode settings can be combined. An indicator light comes on in the selected mode button. [ (Floor) : Air is directed to the floor outlets. Y (Vent) : Air is directed to the instrument panel outlets. X (Defog) : Air is directed to the windshield and side window vents. 0 (Defrost) : Press to clear the windshield of fog or frost more quickly. Air is directed to the windshield. For best results, clear all snow and ice from the windshield before defrosting. Do not drive the vehicle until all the windows are clear.


Air Conditioning # (Air Conditioning) (For Non-Stop/Start Vehicles) : Press to turn the air conditioning on or off. If the fan is turned off or the outside temperature falls below freezing, the air conditioner will not run and the indicator light turns off. # (Comfort/Eco Air Conditioning) (For Stop/Start Vehicles) : Press to cycle between the off, comfort, and eco air conditioning modes. The indicator will be lit in comfort and eco modes and turns off when there is no air conditioning function. If the fan is turned off or the outside temperature falls below freezing, the air conditioning compressor will not work. For comfort a/c, press #. The indicator will turn amber. When the indicator light is on, the air conditioner runs automatically to cool the air inside the vehicle or to dry the air needed to defog the windshield faster.


Climate Controls


137


Caution


Do not use a razor blade or sharp object to clear the inside rear window. Do not adhere anything to the defogger grid lines in the rear glass. These actions may damage the rear defogger. Repairs would not be covered by the vehicle warranty.


Buick Encore Owner Manual 9234779) - 2016 - crc - 7/30/15


(GMNA-Localizing-U.S./Canada/Mexico-


For eco a/c, press# again. The indicator will turn green. This setting balances fuel economy and air conditioning comfort. In warm weather conditions, auto stops may occur more frequently and the vehicle interior may be warmer as compared to the comfort air conditioning. This setting allows higher humidity inside the vehicle and window fogging before the engine restarts. Pressing the 0 button during an auto stop may restart the engine to prevent window fogging. To reach comfort levels quickly during an auto stop, the engine will restart if the air conditioner is off and # is selected. If temperature controls are adjusted cooler during an auto stop, the engine may restart to ensure that comfort is reached. h (Recirculation) : Press to turn on the recirculation. An indicator light comes on. Air is recirculated inside the vehicle. It helps to quickly cool the air inside the vehicle or


reduce entry of outside air and odors. To improve fuel efficiency and to cool the vehicle faster, recirculation may be automatically selected in warm weather when the temperature is set to the coldest setting. The recirculation light will not come on. Press h to select recirculation; press it again to select outside air. Rear Window Defogger 1 (Rear Defogger) : Press to turn the rear window defogger on or off. An indicator light on the button comes on to show that the rear window defogger is on. The defogger only works when the ignition is in ON/RUN. The defogger turns off if the ignition is in the ACC/ ACCESSORY or LOCK/OFF position. Do not drive the vehicle until all the windows are clear.


Buick Encore Owner Manual 9234779) - 2016 - crc - 7/30/15


(GMNA-Localizing-U.S./Canada/Mexico-


138


Climate Controls


Dual Automatic Climate Control System


The heating, cooling, and ventilation for the vehicle can be controlled with this system.


1. Driver and Passenger Heated


8. Air Conditioning or Comfort/


Eco Air Conditioning


9. Recirculation 10. Heated Steering Wheel (If


Equipped)


Seats (If Equipped)


2. Driver and Passenger Temperature Controls


3. Air Delivery Modes 4. AUTO (Automatic Operation) 5. Defrost 6. Rear Window Defogger 7. Fan Controls


Climate Control Influence on Stop/ Start Operation and Fuel Economy (If Equipped) The climate control system depends on other vehicle systems for heat and power input. Certain climate control settings can lead to higher fuel usage and/or fewer auto stops. The following are climate control settings that use more fuel: . Comfort air conditioning mode. . The defrost mode. . Extreme temperature settings,


such as LO or HI.


. High fan speed settings. To help reduce fuel usage: . Use the full automatic control as


described under “Automatic Operation” following.


. Use eco air conditioning, instead


of the comfort air conditioning.


. Select a temperature setting that


is higher in hot weather and lower in cold weather.


. Turn off the air conditioning


when it is not needed.


Buick Encore Owner Manual 9234779) - 2016 - crc - 7/30/15


(GMNA-Localizing-U.S./Canada/Mexico-


. Only use defrost to clear the


windows.


Automatic Operation The system automatically controls the fan speed, air delivery, air conditioning, and recirculation in order to heat or cool the vehicle to the desired temperature. When the AUTO indicator light is on, the system is in full automatic operation. If the air delivery mode or fan setting is manually adjusted, the auto indicator turns off and displays will show the selected settings. To place the system in automatic mode do the following: 1. Press AUTO. 2. Set the temperature. Allow the system time to stabilize. Then adjust the temperature as needed for best comfort. To improve fuel efficiency and to cool the vehicle faster, recirculation may be automatically selected in warm weather. The recirculation light


will not come on. Press h to select recirculation; press it again to select outside air. English units can be changed to metric units through the Driver Information Center (DIC). See Driver Information Center (DIC) 0 113.


Manual Operation 9 (Fan Control) : Press the lower 9 button to decrease the fan speed. Pressing the lower button longer turns the fan and cooling off. Press the upper 9 button to increase the fan speed. The selected fan speed is indicated by a number on the display screen. Press AUTO to return to automatic operation. Air Delivery Modes : Press [, Y, or X to change the direction of the airflow. Air delivery mode settings can be combined. An indicator light comes on in the selected mode button.


Climate Controls


139


Changing the mode cancels the automatic operation and the system goes into manual mode. Press AUTO to return to automatic operation. [ (Floor) : Air is directed to the floor outlets. Y (Vent) : Air is directed to the instrument panel outlets. X (Defog) : Air is directed to the windshield and side window vents. 0 (Defrost) : Press to clear the windshield of fog or frost more quickly. Air is directed to the windshield. For best results, clear all snow and ice from the windshield before defrosting. # (Air Conditioning) (For Non-Stop/Start Vehicles) : Press to turn the air conditioning on or off. If the fan is turned off or the outside temperature falls below freezing, the air conditioner will not run and the indicator light turns off. Press AUTO to return to automatic operation. When the indicator light is on, the air conditioner runs


Buick Encore Owner Manual 9234779) - 2016 - crc - 7/30/15


(GMNA-Localizing-U.S./Canada/Mexico-


140


Climate Controls


automatically to cool the air inside the vehicle or to dry the air needed

Loading...
x