Download PDF Manual


ba8_e70ag.book Seite 176 Freitag, 5. Juni 2009 11:42 11


Loading CD/DVD changer 1. Press the


button.


The LED on the first empty compartment flashes.


2. Select another CD/DVD compartment if so


desired: Press the


...


button.


3. When the LEDs 2 under the CD/DVD slot flash, insert a single CD/DVD into the mid- dle. The CD/DVD is automatically pulled in and placed into the selected CD/DVD compart- ment.


Only insert CD/DVD if the LEDs 2 under the CD/DVD slot are flashing;


otherwise, you may damage the CD/DVD or the CD/DVD changer. Do not push on the CDs/DVDs; they may jam and no longer eject properly.<


4. To load additional CD/DVD compartments:


Repeat steps 1 to 3.


Filling empty CD/DVD compartments 1. Hold down the


button.


The LEDs on the empty CD/DVD compart- ments flash.


2. When the LEDs 2 under the CD/DVD slot flash, insert a single CD/DVD into the mid- dle. The CD/DVD is automatically pulled in and placed into the first empty CD/DVD com- partment.


Only insert CD/DVD if the LEDs 2 under the CD/DVD slot are flashing;


otherwise, you may damage the CD/DVD or the CD/DVD changer. Do not push on the CDs/DVDs; they may jam and no longer eject properly.<


3. Wait until the CD/DVD has been pulled in. 4. To load additional CD/DVD compartments:


Repeat steps 2 and 3.


After filling, it can take a few minutes to read the CDs/DVDs.


176


Removing CDs/DVDs individually 1. Press the 2. Press the


button.


...


button to select the


CD/DVD compartment. The CD/DVD is slid a short distance out from the CD/DVD changer.


3. Remove the CD/DVD.


If the CD is not removed, it will be pulled back in again after approx. 10 seconds.<


Removing all CDs/DVDs 1. Hold down the button.


The CDs/DVDs will be slid out a short dis- tance out from the CD/DVD changer, in sequence.


2. Remove the CDs/DVDs.


Notes


BMW CD/DVD players and changers are officially designated Class 1 laser prod- ucts. Do not operate if the cover is damaged, otherwise severe eye damage can result. Do not use self-recorded CDs/DVDs with labels applied as these can become detached during playback due to heat buildup and can cause irreparable damage to the device. Only use round CDs/DVDs with a standard diameter of 4.7 in/12 cm and do not play CDs/ DVDs with an adapter, e.g. CD singles, as other- wise the CD/DVD or the adapter my jam and no longer eject properly. Do not use a combined CD/DVD, e.g. DVDPlus, otherwise the CD/DVD may jam and no longer eject properly.<


General malfunctions BMW CD/DVD changers and players have been optimized for performance in vehicles. In some instances they may be more sensitive to faulty CDs/DVDs than stationary devices would be. If a CD/DVD cannot be played, first check whether it has been inserted correctly.


ba8_e70ag.book Seite 177 Freitag, 5. Juni 2009 11:42 11


Humidity High levels of humidity can lead to condensa- tion on the CD/DVD or the laser's scan lens and temporarily prevent playback.


Malfunctions with individual CDs/DVDs If malfunctions occur only with particular CDs/ DVDs, this can be due to one of the following causes:


Self-recorded CDs/DVDs Possible reasons for malfunctions with self- recorded CDs/DVDs are, e.g., inconsistent data-creation or recording processes, or poor quality or high age of the CD/DVD blank. Only label CDs/DVDs on the upper side with a pen intended for this purpose.


Damage Avoid fingerprints, dust, scratches and mois- ture. Store CDs/DVDs in a sleeve. Do not subject CDs/DVDs to temperatures above 1227/506, nor to high humidity levels or direct sunlight.


CDs/DVDs with copy protection CDs/DVDs are often provided with a copy pro- tection feature by the manufacturer. This can mean that some CDs/DVDs cannot be played or can only be played to a limited extent.


MACROVISION This product contains copyrighted technology that is based on multiple registered U.S. pat- ents and the intellectual property of the Macro- vision Corporation and other manufacturers. Use of this copyrighted material must be approved by Macrovision. Unless otherwise agreed with Macrovision, media with this pro- tection may only be used for private purposes. The copying of this technology is strictly forbid- den.


177


ba8_e70ag.book Seite 178 Freitag, 5. Juni 2009 11:42 11


Music collection


Music, storing The music tracks from CDs, DVDs and USB devices can be stored in the music collection in the vehicle and played from there. > Audio CD: tracks are converted into a com- pressed audio format when they are stored. If available, information on the album, such as the artist, is stored as well.


> CD/DVD or USB device with compressed


audio files: the entire content of the CD/ DVD or the USB device is stored in the vehi- cle as an album. After storing, the tracks and directories can be deleted individually. Files are only stored in the WMA, MP3, and AAC formats. Tracks with DRM copy protection can be stored in the vehicle but cannot be played back.


Regularly back up the music data; other- wise, it could be lost if there is a fault on


the hard disk.<


Music recognition technology and related data are provided by


Gracenote®. Gracenote® is the industry stan- dard in music recognition technology and related content delivery. For more information, please visit www.gracenote.com. CD and music-related data from Gracenote, Inc., copyright © 2000-2009 Gracenote. Gracenote Software, copyright 2000-2009 Gracenote. This product and service may prac- tice one or more of the following U.S. Patents: 5,987,525, 6,061,680, 6,154,773, 6,161,132, 6,230,192, 6,230,207, 6,240,459, and 6,330,593 as well as other granted or pending patents. Some services supplied under license from Open Globe, Inc. for U.S. Patent: 6,304,523. Gracenote and CDDB are registered trade- marks of Gracenote. The Gracenote logo and logotype and the "Powered by Gracenote" logo are trademarks of Gracenote.


178


Storing CDs/DVDs CDs/DVDs can only be stored by the CD/DVD player. 1. 2. "CD/Multimedia" 3. "CD/DVD" 4. Select the


Insert a CD/DVD into the CD/DVD player.


symbol for the CD/DVD


player.


5. "Store in vehicle"


The music collection is displayed. The tracks are stored and played back in sequence from the music collection. Observe the following during the storage pro- cess: Do not switch back to the CD/DVD player and do not remove the CD/DVD from the CD/DVD player, otherwise the storage process will be interrupted. You can switch to the other audio sources with- out interrupting the storage process. Tracks from the current CD/DVD can also be called up, if they have been stored already.


Interrupting storage 1. "CD/Multimedia" 2. "CD/DVD"


ba8_e70ag.book Seite 179 Freitag, 5. Juni 2009 11:42 11


3. "Storing..."


1. Connect the USB device to the USB inter-


face in the glove compartment.


2. "CD/Multimedia" 3. "Music collection" 4. Open "Options". 5. "Music data import/export" 6. "Import music (USB)"


4. "Cancel storing" The storage process is interrupted and can be continued at any time.


Continuing the storage process 1. "CD/Multimedia" 2. "CD/DVD" 3. Select the


symbol for the CD/DVD


player.


4. "Continue storing" Storage of the CD continues at the beginning of the track at which storage was interrupted.


Album information During storage, information such as the name of the artist is stored with the track, if this infor- mation is available in the vehicle database or on the CD.


Storing from a USB device To store music, a suitable device must be con- nected to the USB interface in the glove com- partment. > Suitable devices: USB mass storage


devices, such as USB flash drives or MP3 players with a USB interface.


> Unsuitable devices: USB hard disks, USB


hubs, USB memory card readers with multi- ple inserts, Apple iPod/iPhone.


Music from a USB device can be stored only via the USB interface in the glove


compartment.<


Playing music


Music search All tracks for which additional information has been stored can be accessed by the music search. Tracks without additional information can be called up via the corresponding album. 1. "CD/Multimedia" 2. "Music collection" 3. "Music search"


179


ba8_e70ag.book Seite 180 Freitag, 5. Juni 2009 11:42 11


4. Select the desired category.


5. To select the desired entry:


> Open "A-Z search" and enter the


desired entry.


or > Select the desired entry from the list.


6. Select additional categories if desired.


The tracks found are listed in alphabetical order. Not all categories need to be selected. For example, to search for all tracks by a certain artist, select that artist only. All of the tracks by that artist are then displayed.


7. "Start play"


Restarting the music search "New search"


Current playback The list of tracks that was generated last by the music search or the album selected last. 1. "Current playback"


2. Select the desired track, if necessary.


180


Top 50
List of the 50 most frequently played tracks. 1. "CD/Multimedia" 2. "Music collection" 3. "Top 50" 4. Select the desired track, if necessary.


Albums All stored albums, listed in order of their storage dates. Symbols indicate the format.


Symbol


Format


Audio CD


Compressed audio files


1. "CD/Multimedia" 2. "Music collection" 3. Select the desired album.


Depending on the album, the tracks or the subdirectories of the album are displayed. The first track is played automatically, if possible.


4. To select tracks, change directories if


needed. To go up one level in the directory, move the controller to the left.


Random play sequence All tracks of the selection are played back in random order. 1. "CD/Multimedia" 2. "Music collection" 3. Open "Options".


ba8_e70ag.book Seite 181 Freitag, 5. Juni 2009 11:42 11


4. "Random"


4. Open "Options". 5. "Delete album"


Deleting a directory or track A track cannot be deleted while it is being played. A directory cannot be deleted while a track from the directory is being played. 1. "CD/Multimedia" 2. "Music collection" 3. Highlight the directory or track. 4. Open "Options". 5. "Delete folder" or "Delete track".


Free memory capacity Display the free memory capacity in the music collection. 1. "CD/Multimedia" 2. "Music collection" 3. Open "Options". 4. "Free memory"


Music collection


Backing up the music collection The entire music collection can be stored on a USB medium. Make sure there is enough free memory capacity on the USB device. Depending on the number of tracks, backing up the music collection may take several hours. Therefore, it is best to perform the backup dur- ing a long trip. 1. Start the engine. 2. Connect the USB device to the USB inter-


face in the glove compartment.


3. "CD/Multimedia" 4. "Music collection" 5. Open "Options".


181


Managing music


Albums


Renaming an album The name of the album, if available, is automat- ically entered when the album is stored. If the name is unknown, it can be changed later. An album cannot be renamed while a track from that album is being played. 1. "CD/Multimedia" 2. "Music collection" 3. Highlight the album. 4. Open "Options". 5. "Rename album"


6. Select the letters individually.


Deleting an album An album cannot be deleted while a track from the album is being played. 1. "CD/Multimedia" 2. "Music collection" 3. Highlight the album.


ba8_e70ag.book Seite 182 Freitag, 5. Juni 2009 11:42 11


6. "Music data import/export"


7. "Backup music on USB"


Restoring the music collection in the vehicle


When storing from the USB device, the music collection existing in the vehicle is


replaced.< 1. "CD/Multimedia" 2. "Music collection" 3. Open "Options". 4. "Music data import/export" 5. "Restore music from USB"


Deleting the music collection 1. "CD/Multimedia" 2. "Music collection" 3. Open "Options". 4. "Delete music collection"


182


ba8_e70ag.book Seite 183 Freitag, 5. Juni 2009 11:42 11


External devices


AUX-IN connection You can connect an external audio device, e.g. an MP3 player, and play the sound via the vehi- cle speakers. The sound can be adjusted via iDrive.


Connecting


4. "Volume"


Open the lid of the center armrest. Connection for audio playback: TRS connector 1/8 in/3.5 mm To play audio tracks through the vehicle's speaker system, connect the headphone or line-out port of the device with the AUX-IN con- nection.


Starting audio playback Connect the audio device, switch it on and select a track. Operate the system on the audio device.


Using iDrive 1. "CD/Multimedia" 2.


"AUX front"


Adjusting volume The volume of the sound output depends on the audio device. If this volume differs markedly from the volume of the other audio sources, it is advisable to adjust the volumes. 1. "CD/Multimedia" 2. Then say "External devices" if applicable. 3.


"AUX front"


5. To adjust: turn the controller. 6. To store: press the controller.


USB-audio interface*/ extended connectivity of music player in mobile phone* It is possible to connect external audio devices/ mobile phones. They can be operated using iDrive. Sound is output on the vehicle loud- speakers.


Options for connecting external devices > Connection via USB audio interface: Apple iPod/iPhone, USB devices, e.g. MP3 players, USB memory sticks, or mobile phones that are supported by the USB audio interface.


> Connection via snap-in adapter*, refer to page 212, when equipped with expanded connection of the music player in the mobile phone: Apple iPhone/mobile phones. Play- back is possible only if no audio device/ mobile phone is connected to the USB- audio interface.


Due to the vast array of audio devices/mobile phones on the market, it is not possible to assure that every audio device/mobile phone can be operated via the vehicle. Ask your BMW Sports Activity Vehicle Center,


183


ba8_e70ag.book Seite 184 Freitag, 5. Juni 2009 11:42 11


which audio devices/mobile phones are com- patible.


Audio files Standard audio formats, e.g. MP3, WMA, WAV (PCM) and AAC, and playlists in the M3U format can be played.


Connecting via USB-audio interface Open the lid of the center armrest.


1 AUX-IN connection for audio playback:


TRS connector 1/8 in/3.5 mm


2 USB interface


Apple iPod/iPhone Use the special cable adapter for Apple iPods/ iPhones, which you can obtain from your BMW Sports Activity Vehicle Center. The cable adapter is required for a proper connection. Connect the Apple iPod/iPhone to the AUX-IN connection and USB interface 1 using the cable adapter for Apple iPod/iPhone. The menu structure of the Apple iPod/iPhone is supported by the USB audio interface.


USB device


When connecting the device use a flexi- ble adapter cable, to protect the USB


interface and your USB device against physical damage.< Connect the USB device to connector 2, using a flexible adapter cable. When the device is connected for the first time, the information on all tracks (e.g. artist, type of music) and the playlists are transferred from the USB device to the vehicle. This process can


184


take some time. The time required is dependent on the USB device and on the number of tracks. During transmission, the tracks can be accessed via the file directory. Information from up to four USB devices can be stored in the vehicle, or a total of about 16,000 tracks. If a fifth USB device is connected or if more than 16,000 tracks are stored, information on exist- ing tracks may be deleted.


Music tracks with integrated Digital Rights Management (DRM) cannot be


played.<


Starting audio playback If the audio device has a device name, this will be displayed if possible. 1. "CD/Multimedia" 2. "External devices" 3. Select the


symbol.


The name of the audio device may appear.


The playback starts with the first track. If an Apple iPhone is connected via the snap-in adapter while an audio device is connected to the AUX-IN connection at the same time, the audio signal of the AUX-IN connection will be played.


Information about the track If information about a track has been stored, it is displayed automatically: > Artist > Album title > Number of tracks > Track file name


ba8_e70ag.book Seite 185 Freitag, 5. Juni 2009 11:42 11


Track search You can access the tracks via the playback lists and information. With USB devices you can also access the tracks via the file directory. Selection is possible via: > Playback lists > Information: type of music, artist, album,


title


> Additionally for USB devices: file directory,


composer


Track titles are displayed if they have been stored in the Latin alphabet.


Starting the track search 1. "CD/Multimedia" 2. "External devices" 3. Select the


symbol.


The name of the audio device may appear. 4. Select the desired category, "Genre", "Art-


ist".


All entries are displayed in a list. The "A-Z search" can be used to find specific entries. > Open "A-Z search" and enter the


desired entry.


> Select the desired entry from the list.


5. Select additional categories if desired.


The tracks found are listed. Not all catego- ries need to be selected. For example, to search for all tracks by a certain artist, select that artist only. All of the tracks by that artist are then displayed.


6. "Start play"


Restarting a track search "New search"


Playback lists To open playback lists. 1. "CD/Multimedia" 2. "External devices" 3. Select the 4. "Playlists"


symbol.


Current playback List of tracks currently being played. 1. "CD/Multimedia" 2. "External devices" 3. Select the 4. "Current playback"


symbol.


Random play sequence You can play the tracks in the selected list in random order, e.g. all tracks of a single artist. 1. "CD/Multimedia" 2. "External devices" 3. Open "Options". 4. "Random"


Fast forward/reverse Press and hold the sponding direction.


button for the corre-


Notes


Do not subject the audio device to extreme environmental conditions, e.g.


extremely high temperatures, refer to the oper- ating manual of the audio device. Otherwise the audio device may be damaged, impairing driv- ing safety while driving.< Depending on the configuration of the audio files, e.g. bit rates greater than 256 Kbit/s, proper playback cannot always be ensured.


185


ba8_e70ag.book Seite 186 Freitag, 5. Juni 2009 11:42 11


Information on connection > The connected audio device is supplied


with a current of max. 500 mA, if the device supports this. Therefore, do not connect the device to the power socket in the vehi- cle.


> Do not use force when plugging the con-


nector into the USB interface.


> Do not connect any devices, e.g. fans or


lamps, to the USB audio interface.


> Do not connect USB hard disks. > Do not use the USB audio interface to


recharge external devices.


186


Controls


ba8_e70ag.book Seite 187 Freitag, 5. Juni 2009 11:42 11


DVD system in rear


With the DVD system in the rear you can play CDs and DVDs with audio, video and image data. The DVD system can also play data from attached external audio and video devices. Audio output is possible both via headphones and via the vehicle speakers. You can control the DVD system using the but- tons on the CD-/DVD player or using the remote control.


You operate some functions using the remote control.<


Enabling DVD system The DVD system can be enabled via iDrive. 1. "Settings" 2. "Allow rear control" 3. "Rear DVD system active"


DVD-System is enabled.


1 Display screen 2 Infrared interface for headphones 3 CD/DVD player 4 Headphone connection:


Jack 1/8 in/3.5 mm


5 12 V sockets, refer to page 121


Folding in display screen When using the ski bag or when transporting bulky pieces of luggage, the display screen should be folded in, as otherwise it may be dam- aged.


When the screen is folded down, do not open the lid of the center arm rest or rest


your arm on the screen; otherwise, you may damage the screen.<


187


ba8_e70ag.book Seite 188 Freitag, 5. Juni 2009 11:42 11


Connecting headphones You can connect headphones with a phone jack 1/8 in/3.5 mm or operate them using the infra- red interface. To enable optimal use of the infrared interface, use infrared headphones that comply with the IEC 61603-2 standard. > Compatible infrared headphones and infor-


mation about supported headphones are available at your BMW Sports Activity Vehi- cle Center.


When using infrared headphones, it is important not to interrupt the infrared


connection between the headphones and the infrared interface, refer to page 187. This means that no obstacle should come between the two and that the cover of the infrared inter- face should not be covered or scratched. Unfa- vorable lighting conditions such as glare from outside can interfere with reception.<


Remote control


1. Turn display screen, arrow 1.


The display screen switches off. 2. Fold in display screen, arrow 2. The display screen is folded out in the reverse order.


CD/DVD player


Controls


1 Press: switching the DVD system on and off Rotate: left headset volume and vehicle vol- ume


2 Ejecting CD/DVD


Start track Stop Playback, pause, freeze-frame Next track


4 CD/DVD slot 5 Connection for external device: RCA jacks 6 Press: switching the DVD system on and off


Rotate: right headset volume and vehicle volume


188


1 Menu navigation 2 Volume for headphones with jack plug 3 Changing track or chapter during CD-,


DVD- or AUX playback, fast forward/rewind


4 Headphones right/left 5 Open start menu for DVD system


Menu navigation You can use the thumbwheel and buttons 1 to navigate through the menus. > Turn the thumbwheel: To select a menu item.


ba8_e70ag.book Seite 189 Freitag, 5. Juni 2009 11:42 11


> Press the arrow buttons:


To switch between windows.


> Press the


button:


To activate the menu item.


The transmission time of the remote control is limited in accordance with legal guidelines. A function can be repeated by pressing or turning the appropriate button or knob.


Changing batteries


Sound output via speakers In addition to the headphones, you can also play the sound via the vehicle speakers. 1. "CD/Multimedia" 2. "External devices" 3. "AUX/rear"


1. Press the detent and remove the cover. 2. Change the batteries. The type and installa-


tion position are marked on the bottom of the battery compartment.


3. Close the cover.


Return old batteries to a collection point or to your BMW Sports Activity Vehicle


Center.<


button.


Setting the language of the DVD system 1. Select a CD/DVD track. 2. Press the 3. Select "Tone". 4. Press the 5. Switch to the top window. 6. Select "Language". 7. Press the button. 8. Select the desired language. 9. Press the


button.


button.


Switching DVD system on/off Press the button on the CD-/DVD player or under the desired screen. The DVD system switches on automatically when a CD or DVD is inserted.


Playing CD/DVD Use the following menu items to access data from a CD/DVD: > Video data via "DVD" > Audio data via "CD" > Pictures via "Photo".


189


ba8_e70ag.book Seite 190 Freitag, 5. Juni 2009 11:42 11


Playing videos from CDs/ DVDs


Country codes of DVDs Your DVD player only plays DVDs with the cod- ing of your home region, e.g. Europe = 2. The country codes supported by your DVD are con- tained in the information on your DVD. An overview of the coding zones:


Code Region


USA, Canada Japan, Europe, Middle East, South Africa Southeast Asia Australia, Central and South America, New Zealand Northwest Asia, North Africa China


DVDs with the code 0 can be played on all devices.<


Starting playback 1. Push the CD/DVD into the drive with the


labeled side facing upward. The CD/DVD is automatically pulled in. > Playback begins automatically after a


few seconds. > If it does not: Select "DVD". Press the


button.


2.


If the DVD control or the DVD-specific menu is displayed when a DVD is inserted, use the remote control buttons for menu navigation to select the desired option. Or: Press the


button on the CD/DVD player. You can control the playback with the buttons on the CD/DVD player or the DVD control. Video-CDs, VCDs, and Super-Video- CDs, i.e. SVCDs, can only be played if


they do not have a DVD-specific menu.<


190


Ejecting CD/DVD Press the button on the CD/DVD player. The DVD emerges slightly from the drive.


DVD control With the DVD control, you can select the title and chapter, open the DVD-specific menu and operate functions such as Language, Fast for- ward and Reverse or Freeze frame. A DVD can briefly deactivate functions of the DVD control, under certain circumstances while the entire DVD is being played. It is not possible to operate the DVD control under these circum- stances. In this case, try to make the selection using the DVD-specific menu. 1. Press the


button on the remote con-


trol during playback.


2. Press the


buttons on the remote control


or turn the thumbwheel to select the desired function.


3. Press the


button.


Symbol


"SET"


"Menu"


Function Exit DVD control Settings for playing DVD Starting playback Stop playback Activate and deactivate freeze frame Skipping chapter Fast forward/reverse Open DVD-specific menu


The DVD control disappears again after a short time if you have not selected a function.


ba8_e70ag.book Seite 191 Freitag, 5. Juni 2009 11:42 11


Or: Press the exit the DVD control.


button on the remote control to


Fast forward/reverse


Forward/reverse with DVD control 1. Press the


button on the remote con-


trol during playback.


2. Select the 3. Press the 4. Press the


symbol.


button. button several times to


increase the fast forward/reverse speed.


The DVD playback will be distorted. To cancel fast forward/reverse: 1. Select the 2. Press the Or: button on the CD/DVD player. Press the The DVD will start play at the point selected.


symbol. button.


Forward/reverse with remote control Press and hold the the desired point. Or: 1. During playback, turn the thumbwheel.


button until you reach


Fast forward/reverse is interrupted.


2. Continue to turn the thumbwheel.


The speed is increased.


3. Press the


button on the CD/DVD player.


Fast forward/reverse is interrupted. The DVD will start play at the point selected.


Skipping chapter You can change to the next or previous chapter during playback. 1. Press the


button on the remote con-


trol during playback.


2. Select the 3. Press the


symbol.


button repeatedly, continuing


until you reach the desired chapter.


Or: Press the remote control repeatedly until you reach the desired chapter.


button on the left or right on the


Freeze frame 1. Press the


button on the remote con-


trol during playback.


symbol. button.


2. Select the 3. Press the To continue playback: 1. Select the 2. Press the As an alternative, you can also stop and con- tinue playback with the button on the CD/ DVD player.


or button.


symbol.


Making settings for DVD 1. Press the


button during playback.


2. Make the settings with the remote control: > "Video settings":


> "Brightness", "Color" and "Contrast" of


the screen


> After switching to the top window, you


can change other settings. "Language":


191


ba8_e70ag.book Seite 192 Freitag, 5. Juni 2009 11:42 11


The system language of the DVD sys- tem "Display": background brightness of screen.


> "Tone":


> "Treble / Bass" and "Balance":


Separately adjustable for the left and right-hand headphones and the infrared headphones.


> "Reset":


The settings are reset to the default value.


> "DVD format": > "Standard" > "Zoom": full-screen playback


> "Language":


Language of the DVD playback. The lan- guage advances one setting each time the menu item is selected.


> "Subtitles":


Language of subtitles or turn off subtitles


> "Title":


Selecting individual tracks on the DVD


> "Angle of view":


Camera angle Notes or symbols that appear during the playback of a film generally point out differ- ent camera angles. These are usually only briefly available.


> "Menu":


Call up the DVD-specific menu.


> "Return":


Exit menu or: Press the trol.


buttons on the remote con-


Many DVDs offer dialogs and subtitles in vari- ous languages or scene descriptions for the hearing impaired. These functions are stored on the DVD.


With some DVDs, it is only possible to select language, subtitles, camera angle,


or title by using the DVD-specific menu. Consult the information accompanying your DVD.<


192


Opening the DVD-specific menu Additional functions may be available on DVDs. It is thus possible, for example, to select from among several possible actions or to access information about the film. 1. Press the


button on the remote con-


trol during playback.


2. Select "Menu". 3. Press the


button.


On some DVDs, you can use "Main menu" and "Title" to access addi-


tional menus in which you can select maga- zine segments about the music scene, for example.<


To make a selection: 1. Select the 2. Press the


symbol.


button until the desired func-


tion is selected.


arrow. button.


3. Select the 4. Press the To return to the start menu: 1. Select the

Loading...
x