Login- Download PDF Manual
-
approved roof load capacity, the approved gross vehicle weight or the axle weights when loading the rack. You can find the specified weights under Weights on page 271. The load on the roof must be evenly distributed and must not extend outward beyond the limits of the loading surface. Always stow the heaviest pieces on the bottom. Be sure that adequate clearance is maintained for raising the glass sunroof*/panorama glass sunroof* and that objects do not project into the opening path of the liftgate. Secure roof-mounted cargo correctly and securely to prevent it from shifting or falling off during the trip. Drive smoothly. Avoid sudden acceleration and braking maneuvers. Take corners gently.
Driving on poor roads Your BMW is at home on all roads and surfaces. It combines a 4-wheel drive system with the advantages of a normal passenger car.
Do not drive on unpaved terrain, as other- wise the vehicle may be damaged.<
When you are driving on poor roads, there are a few points which you should strictly observe for your own safety, for that of your passengers, and for the safety of the vehicle: > Familiarize yourself with the vehicle before driving off and avoid taking risks at all costs. > Adapt your driving speed to the road condi-
tions. The steeper and rougher the road surface is, the lower the speed should be. > If you want to drive on very steep uphill or downhill gradients, make sure beforehand that the engine oil and coolant levels are near the MAX mark, refer to page 240. BMW X5: you can operate your vehicle on uphill and downhill gradients with a maxi- mum slope of 50%.
> On very steep downhill slopes, use Hill Descent Control HDC, refer to page 90. BMW X5: it is possible to start off on inclines of up to 33%. The permissible body roll is 50%.
> While driving, watch carefully for obstacles such as rocks or holes. Try to avoid these obstacles whenever possible.
> Make sure that the undercarriage does not touch the ground, for example on crests and bumpy roads. The ground clearance of the vehicle is a maximum of approx. 8 in/20 cm. Please note that the ground clearance can vary depending on loading and the driving conditions of the vehicle.
> Only drive through road surface water up to
a maximum water depth of > BMW X5 20 in/50 cm > BMW X6 17 in/45 cm and only drive at walking speed; do not remain stationary.
135
ba8_e70ag.book Seite 136 Freitag, 5. Juni 2009 11:42 11
> After driving through water at low speed, lightly press the brake pedal several times to dry the brakes and to prevent the braking effect from being reduced by wetness.
> Depending on the condition of the surface, it may be practical to briefly activate DTC, refer to DTC Dynamic Traction Control on page 89.
> If the drive wheels spin on one side, depress the accelerator pedal sufficiently so that the driving stability control systems can distrib- ute the drive forces to the individual wheels. Please note the following points after driving on poor roads to maintain the driving safety of your BMW: > Clean the coarsest dirt from the body. > Clean mud, snow, ice etc. from the wheels
and tires and check the tires for damage.
136
ba8_e70ag.book Seite 137 Freitag, 5. Juni 2009 11:42 11
137
ba8_e70ag.book Seite 138 Freitag, 5. Juni 2009 11:42 11
ba8_e70ag.book Seite 139 Freitag, 5. Juni 2009 11:42 11
Navigation Navigation
This chapter describes how you can enter destinations and specify your route so that your navigation system guides you reliably to your destination.
ba8_e70ag.book Seite 140 Freitag, 5. Juni 2009 11:42 11
Navigation system
General information With the help of satellites, the navigation sys- tem is able to ascertain the precise position of the vehicle and guide you reliably to any desti- nation you enter. Navigation data are stored in the vehicle and can be updated.
Enter data only with the vehicle station- ary, and always give priority to the appli- cable traffic regulations in the event of any con- tradiction between traffic and road conditions and the instructions issued by the navigation system. Failure to take to this precaution can place you in violation of the law and put vehicle occupants and other road users in danger.<
Updating the navigation data
General information Navigation data and an activation code can be obtained from your BMW Sports Activity Vehi- cle Center. Updating the data can take several hours, depending on the volume of data. > The data are updated as you drive. > The updating process continues automati-
cally when you resume driving.
> All functions remain available as you drive. > Data are stored on the hard drive or in the
internal memory.
> After the updating process is complete, the
system restarts.
> The medium with the navigation data can
be removed after the update.
140
Updating the navigation data
Inserting navigation DVD 1.
Insert navigation DVDs into the DVD player with the printed side up.
2. Follow the instructions on the Control Dis-
play.
3. Enter the activation code of the navigation
DVDs and switch DVDs if necessary.
Removing navigation DVD
1. Press the
button 1.
The DVD emerges slightly from the drive.
2. Remove the DVD. If the DVD is not ejected from the drive, it is pos- sible that it is blocked. In this case a message is also shown on the Control Display.
Displaying information on the version 1. "Navigation" 2. Open "Options". 3. "Navigation system version":
Information on the data version is displayed.
ba8_e70ag.book Seite 141 Freitag, 5. Juni 2009 11:42 11
Destination entry
In entering your destination you can select from among the following options: > Entering a destination manually, see below > Selecting destination from address book,
refer to page 143
> Last destinations, refer to page 144
> Special destinations, refer to page 144
> Entering a destination on the map, refer topage 146
> Selecting home address, refer to page 144
> Entering destination via voice*, refer topage 147
You can also store a navigation destination on the programmable memory buttons, refer to page 20.
Enter data only with the vehicle station- ary, and always give priority to the appli- cable traffic regulations in the event of any con- tradiction between traffic and road conditions and the instructions issued by the navigation system. If you do not observe this precaution, you can endanger the vehicle occupants and other road users.<
Entering a destination manually The system's word-matching principle makes it easier for you to enter the names of streets or towns, refer to page 149. This allows you to enter different spellings and completes your entry automatically, so that stored names can be called up quickly. 1. Press the MENU button. 2. "Navigation"
3. "Enter address"
The system also supports you with the follow- ing features: > If you do not enter a street, the system will guide you to the downtown area of a town or city.
> You can skip the entry of country and town/ city if the current entries should be retained for your new destination.
Entering a state/province 1. "Navigation" 2. "Enter address" 3. Select "State/Province" or the displayed
state/province.
Entering a town/city 1. Select "Town/City/Postal Code" or the dis-
played town/city, or select letters.
141
ba8_e70ag.book Seite 142 Freitag, 5. Juni 2009 11:42 11
Delete letters, if necessary: > To delete individual letters: Turn the controller to select then press the controller.
> To delete all letters:
Turn the controller to select then press the controller for an extended period.
, and
> To enter spaces:
Select the
symbol.
The list gradually grows smaller each time you enter a new letter.
2. Move the controller to the right. 3. Select the name of the town/city from the list. The three destinations stored last are displayed.
If there are several towns/cities with the same name: 1. Change to the list of town/city names. 2. Highlight the town/city: a preview map is
displayed.
3. Select the town/city.
Entering the postal code 1. Select "Town/City/Postal Code" or the dis-
played town/city.
symbol.
2. Select the 3. Select the digits. 4. Change to the list of postal codes and
towns/cities.
5. Highlight postal code: a preview map is dis-
played.
6. Select the postal code.
Entering street and intersection 1. Select "Street" or the displayed street. 2. Enter a street and intersection as you would
the town/city.
After the street you can also enter the intersec- tion or the house number.
142
If there are several streets with the same name: 1. Change to the list of street names. 2. Highlight the street: a preview map is dis-
, and
played.
3. Select the street.
Entering a street without a destination town/city You can also enter a street without entering a town/city of destination. In this case all streets of the entered country are offered for selection. The related town/city is displayed after the street name. If a town/city has already been entered, you can undo this entry. This may be practical if the desired street does not exist in the entered des- tination, because, for example, it belongs to another part of the town/city. 1. "Navigation" 2. "Enter address" 3. Select "Street" or the displayed street. 4. Change to the list of street names. 5. "In" the state/province currently displayed.
6. Select the letters. 7. Change to the list of street names. 8. Highlight the street: a preview map is dis-
played.
9. Select the street.
Entering house number You can enter any house number stored in the navigation data for the street. 1. "House number" 2. Select the digits.
ba8_e70ag.book Seite 143 Freitag, 5. Juni 2009 11:42 11
3. Change to the list of house numbers. 4. Select a house number or range of house
numbers.
Selection after destination entry > "Accept destination"
Destination guidance starts immediately.
Storing a destination in the address book Store the destination in the address book after entering the destination. 1. Open "Options". 2. "Store as new contact" or "Add to existing
contact".
> "Route preference"
refer to page 150.
> "Points of Interest at loc."
refer to page 144.
If a new town/city is selected during destination guidance, the current destination guidance is terminated.
Address book To create contacts, refer to page 213.
Selecting a destination from the address book 1. "Navigation" 2. "Address book"
Contacts with addresses are displayed if these addresses have been checked as destinations. If the contacts with addresses are not dis- played by the mobile phone, then they must first be checked as destinations, refer to page 214.
3. Select an existing contact, if available. 4. Select "Business address" or "Home
address".
5. Enter "Last name" and, if necessary, "First
name".
6. "Store in vehicle"
Storing the position Your current position can be stored in the address book. 1. "Navigation" 2. Open "Options". 3. "Store position as contact" or "Add position
to contact".
3. Select a contact from the list or, if neces-
4.
sary, using "A-Z search". If necessary, select "Business address" or "Home address".
4. Depending on the selection, select an exist-
ing contact from the list or the type of address and enter the last and first name.
5. "Store in vehicle"
143
3. Select the destination. Destination guidance is started.
Editing a destination Destinations can be edited, for example, to change the house number of an existing entry. 1. "Navigation" 2. "Last destinations" 3. Highlight the destination. 4. Open "Options". 5. "Edit destination"
Deleting the last destinations 1. "Navigation" 2. "Last destinations" 3. Highlight the destination. 4. Open "Options". 5. "Delete entry" or "Delete all last destina-
tions".
Special destinations You can search for a special destination, e.g. a hotel or place of interest, and start destination guidance to the corresponding location. The search can be narrowed by entering the location and type of special destination. The scope of information provided depends on the particular set of naviga-
tion data you are using.<
Accessing search for special destinations 1. "Navigation" 2. "Points of Interest"
ba8_e70ag.book Seite 144 Freitag, 5. Juni 2009 11:42 11
Editing or deleting an address 1. "Navigation" 2. "Address book" 3. Highlight the entry. 4. Open "Options". 5. "Edit in Contacts" or "Delete entry".
Using home address as destination The home address must be stored as a destina- tion. Refer to Specifying a contact as the home address, page 213. 1. "Navigation" 2. "Address book" 3. "Home"
Destination guidance is started.
Last destinations The last destinations are stored automatically. These destinations can be called up and used as a destination for destination guidance.
Accessing last destinations 1. "Navigation" 2. "Last destinations"
144
ba8_e70ag.book Seite 145 Freitag, 5. Juni 2009 11:42 11
Special destination location Search for a special destination according to its location relative to a locality or route. 1. "Search area"
Starting the search for special destinations 1. "Start search" after the criteria have been
defined.
2. A list of the special destinations is dis-
2. Select the location where the system is to
search for the special destination: > "At current location" > "At destination" > "At a different destination" > "Along route"
Special destination category 1. "Category" 2. Select "All" or a specific category, e.g.
hotels or restaurants.
Category details For some special destinations, it is possible to display additional details that are recorded in the navigation data, e.g. restaurant type: Italian. "Category details"
played. > Special destinations "At current loca- tion" are listed according to their dis- tance from the current location and are displayed with a directional arrow point- ing to the destination.
> Destinations of the selected category
are displayed in the map display as sym- bols. The display depends on the map scale and the category.
> Special destinations "At destination",
"At a different destination", "Along route" are listed according to their dis- tance from the location where the search is being performed.
3. Highlight the special destination: the desti-
nation is displayed in the preview map.
4. Select the special destination. 5. Select the 6.
symbol: "Start guidance".
If a phone number is available, a connection can be established, if desired.
Destination entry using BMW Assist* The concierge service, refer to page 216, selects a desired address and transmits it for direct adoption into the navigation system. 1. "Navigation" 2. Open "Options". 3. Open "BMW Assist dest. entry".
Entering special destinations by name 1. "Navigation" 2. "Points of Interest" 3. "Name, A-Z search" 4. Enter the letters.
Depending on the distance, the search may take some time. The list can contain a max- imum of 100 entries.
145
ba8_e70ag.book Seite 146 Freitag, 5. Juni 2009 11:42 11
5. Change to the list of special destinations. 6. Highlight the special destination. The desti-
nation is displayed in the preview map.
7. Select the special destination. 8. Select the
symbol: "Start guidance".
Entering the destination via map If you only know the location of the town or street, you can enter the destination using the map.
Displaying special destinations in the map To display symbols of the special destinations in the map: 1. "Navigation" 2. "Map" 3. Open "Options". 4. "Display Points of Interest"
Accessing map 1. "Navigation" 2. "Map" A map section is displayed on the Control Dis- play. The map shows the current position of the vehicle.
Selecting the destination 1. Select the
symbol. The interactive map is
started.
5. Select the settings.
Importing special destinations 1. "Navigation" 2. "Points of Interest" 3. Open "Options". 4. "Import (USB)" via the USB interface in
the glove compartment or "Import (BMW Search)"*
Deleting special destinations 1. "Navigation" 2. "Points of Interest" 3. Open "Options". 4. "Delete my Points of Interest" 5. "Yes"
2. Select the destination with the cross-hairs.
> Changing scale: turn the controller. > Moving map: move the controller in the
corresponding direction.
> Shifting map diagonally: move the con- troller in the corresponding direction and turn the controller.
3. Press the controller to display other menu
4.
items. If you wish, select the "Start guidance".
symbol:
Specifying the street If the system does not detect any street, then a street name in the vicinity or the coordinates of the destination are displayed.
146
ba8_e70ag.book Seite 147 Freitag, 5. Juni 2009 11:42 11
Interactive map In the interactive map, the scale can be adjusted and the visible map section can be shifted. In addition, pressing the controller makes further functions available:
symbol: "Start guidance".
> Select the > "Exit interactive map" > Map display > "Display destination"
The map section around the destination is displayed.
> "Display current location"
The map section around your current location is displayed.
> "Find points of interest", refer to
page 144.
Entering destination via voice*
General information You can enter a desired destination with the voice activation system. When entering the destination, it is possible to change between voice command and iDrive at any time. Reacti- vate the voice command system for this pur- pose if necessary.
You can use {Voice commands} to have the possible commands read aloud to
you.<
Speaking the entry aloud > Countries, towns/cities, streets, and inter- sections can be either spoken aloud as an entire words or spelled in the system lan- guage, refer to page 22.
> Town/city, street, and house number can
also be spoken aloud in one sentence.
> Spell the entry if the language of the area is
different from the system language.
> Speak the letters smoothly and avoid
excessive emphasis and pauses.
Entering an address 1. Press the
button on the steering wheel.
2.
{Enter address}
3. Wait for the system prompt. 4. Say the desired address in the suggested
form.
5. Continue entering as prompted by the sys-
6.
tem. If necessary, say the parts of the address individually, e.g. town/city.
Entering a town/city The town/city can be spelled or entered as an entire word*.
The entry possibilities depend on the par- ticular navigation data as well as the
country and language settings.<
1.
{City} or {Spell city}.
2. Wait for the system prompt for the town/
city.
3. Say the name of the town/city or if neces-
sary, spell at least the first three letters. Depending on the entry, up to 20 towns/cit- ies are suggested. 4. Select city/town:
> Choose selected city/town: {Yes} > Select other city/town: {New entry} > Select an entry, e.g. {Entry 2} > Spell the entry: {Spell city}
147
ba8_e70ag.book Seite 148 Freitag, 5. Juni 2009 11:42 11
Similar-sounding towns/cities that can- not be differentiated by the system are compiled in a separate list and displayed as a town/city followed by three dots. If necessary, select this entry with {Yes}. Then select the desired city/town in this list.< The town/city can also be selected from the list using iDrive: turn the controller until the desired town/city is displayed and press the controller.
Entering a street or intersection The street or intersection is entered in the same way as the town/city.
Entering house number You can enter house numbers up to the number 999:
{House number}
1. 2. Say the house number. 3.
{Yes} to confirm the house number and start destination guidance.
Starting destination guidance
{Start guidance}
Destination guidance starts immediately.
Saving destination The destination is added to the destination list and is displayed in the list of last destinations.
Trip planner The trip planner can be used to plan a trip with several legs to different destinations.
New trip Various intermediate destinations can be entered for a trip. 1. "Navigation" 2. "Map" 3. Select the
symbol: "Guidance"
148
4. "Enter new destination"
5. "Enter address"
Entering intermediate destinations A maximum of 30 intermediate destinations can be entered for one trip. 1. "Enter new destination" 2. "Enter address using:" 3. Select the type of destination entry and
enter the intermediate destination.
4. Select the location where the intermediate
destination is to be inserted: "Reposition dest. in the trip". If applicable, select "Add as another dest.".
5.
Starting the trip After all of the intermediate destinations are entered, access a stored trip directly "Accept destination" or via "Stored trips".
Storing a trip Up to 30 planned trips can be stored in the trip list. 1. Open "Options". 2. "Store trip" 3. Enter the letters.
ba8_e70ag.book Seite 149 Freitag, 5. Juni 2009 11:42 11
The trip is stored in the trip list under the entered name.
Changing trips These functions are not available for imported trips.
Changing the trip direction Intermediate destinations are displayed in reverse order in the list. 1. "Map" 2. "Guidance" 3. "Reverse order of trip dest."
Options for intermediate destinations 1. "Destination in the trip" 2. Select an intermediate destination. 3. Select option:
> Shift the intermediate destination in the
list: "Reposition dest. in the trip"
> Delete intermediate destination:
"Delete dest. in the trip"
Deleting a trip 1. "Stored trips" 2. Select the desired trip. 3. Open "Options". 4. "Delete all trips" or "Delete trip".
Word-matching principle The system supports the word matching princi- ple to make it easier for you to enter the names of streets or towns/cities. The system runs ongoing checks, comparing your destination entries with the data stored in the vehicle as the basis for instant response. The user benefits include: > Names of specific locations can also vary from the official versions if you are using a spelling that is customary in another coun- try.
Example: Instead of "München", you can also enter the English spelling "Munich" or the Italian spelling "Monaco".
> When you are entering the names of towns/ cities and streets the system will complete them automatically as soon as enough let- ters are available to ensure unambiguous identification.
> The system offers only those letters for
selection of name entries that are stored in the vehicle. The system will not accept non existent names and addresses.
149
ba8_e70ag.book Seite 150 Freitag, 5. Juni 2009 11:42 11
Destination guidance
Starting destination guidance 1. "Navigation" 2. "Enter address" 3. Select the destination. 4. "Accept destination" When the route has been calculated, it is dis- played in the map on the Control Display.
Terminating destination guidance 1. "Navigation" 2. "Map" 3. Select the 4. "Stop guidance"
symbol.
Continuing destination guidance If the destination was not reached at the end of the last trip, the system asks whether it should continue destination guidance. Select "Resume guidance" or "Stop guidance".
Route criteria
General information You can influence the calculated route by choosing certain route criteria. You can change the route criteria as often as you like while entering the destination and whenever the des- tination guidance is active. The route is planned according to fixed rules. The road type is taken into account, e.g. whether it is a highway or a winding road. As a result, the routes recommended by the naviga- tion system may not always be the same ones
150
that you would choose based on personal expe- rience. The settings are stored for the remote control currently in use.
Changing route criteria 1. "Navigation" 2. "Map" 3. "Route preference" 4. Selecting a criterion:
> "Fast route": a route that is time-opti-
mized by combining the shortest possi- ble distance and route segments that can be driven quickly
> "Efficient route": an optimized combina- tion of the fastest possible route with a short route
> "Short route": short distance without
taking time into account
> "Alternative routes": suggestions of
other alternative routes with destination guidance running
5. Select additional route criteria, if desired.
Where possible, the selected criteria will be avoided on the route. > Avoid highways where possible:
"Avoid highways"
> Avoid toll roads where possible:
"Avoid toll roads"
> Avoid ferries where possible:
"Avoid ferries"
ba8_e70ag.book Seite 151 Freitag, 5. Juni 2009 11:42 11
The setting applies to the current route and to the planning of future routes.
Dynamic destination guidance "Dynamic guidance" is switched on: The route is automatically changed in the event of traffic obstructions. The system does not point out traffic obstructions along the original route. Depending on the type of road and the nature and length of the traffic obstruction, the route can also be calculated so that you travel through the traffic obstruction. 1. "Navigation" 2. Open "Options". 3. "Dynamic guidance"
If the "Avoid highways", "Avoid toll roads" or "Avoid ferries" route criteria are
selected, route calculation may take consider- ably longer.<
Route
General information Depending on the equipment in your vehicle, various views of the route are available during destination guidance. > Map display > Arrow display > Display of the streets and towns/cities on
the route
Displaying a list of the streets or towns/ cities on the route When destination guidance is started, a list of the streets and towns/cities on the route is dis- played. The driving distances and traffic bulle- tins are displayed for each route section. > Display a list of the streets and towns/cities
on the route.
> Display the traffic bulletins and the driving
distance for each route section.
1. "Navigation" 2. "Route information" 3. Highlight a section. The section is displayed in the preview map.
Bypassing a section of the route During destination guidance, you can revise the navigation system's route recommendations to avoid particular stretches of road. Enter the number of miles/kilometers that you want to travel before returning to the original route. 1. "Navigation" 2. "Route information" 3. "New route for:"
4. Turn the controller: enter the desired mile-
age.
5. Press the controller. If the route section should no longer be bypassed: "Remove blocking".
Gas station recommendations The vehicle calculates the range and recom- mends several gas stations along the route. 1. "Navigation" 2. "Route information" 3. "Recommended refuel"
A list of filling stations is displayed.
4. Select a gas station. 5. Select the guidance.
symbol to start destination
151
ba8_e70ag.book Seite 152 Freitag, 5. Juni 2009 11:42 11
Destination guidance via voice instructions
Switching voice instructions on/off Voice instructions can be switched on or off during destination guidance. 1. "Navigation" 2. "Map" 3.
Select the
symbol.
Symbol
Meaning
Voice instructions switched on
Voice instructions switched off
For rapid access, the feature can be stored on a programmable memory button, refer to page 20.
Repeating a voice instruction 1. "Navigation" 2. "Map" 3. Highlight the symbol. 4. Press the controller twice.
Adjusting the volume of voice instructions* The volume can be adjusted only while a voice instruction is being issued. 1. Repeat the last voice instruction, if neces-
sary.
2. Turn the knob during the voice instruction
to select the desired volume.
The setting is stored for the remote control cur- rently in use.
152
Map display
Displaying map view You can have your current position displayed on a map. After starting the destination guidance, the planned route is shown on the map. 1. "Navigation" 2. "Map"
The following functions are directly available in the map display:
Symbol
Function Displaying the destination and starting/terminating destination guidance
Switching voice instructions on/off Changing route criteria or select- ing route alternatives
Special destinations
Displaying traffic bulletins
Interactive map
Map display
Changing scale
Information in the map display: > Time, entertainment source, sound output,
map orientation
> Distance from destination, estimated time of arrival, if destination guidance is active. > Any traffic obstructions are highlighted in
color.
ba8_e70ag.book Seite 153 Freitag, 5. Juni 2009 11:42 11
Viewing the map 1. Select the
2. Select a setting:
symbol.
> "View facing north" > "View in dir. of travel" > "Perspective view" > "Arrow display" 3. Press the controller.
Changing map scale Select interactive map.
> Moving map: move the controller in the cor-
responding direction.
> Shifting map diagonally: move the control- ler in the corresponding direction and turn the controller.
Changing scale 1. Select the 2. Turn the controller to change the scale.
symbol.
Automatic scaling of the map In the map display facing north, turn the control- ler in any direction until AUTO is displayed as the map scale. The map shows the entire range from your loca- tion to the destination.
Settings for the map display The map appears on the Control Display. 1. Open "Options". 2. "Settings" 3. Set the optimum map view.
> "Day/night mode"
Select according to lighting conditions and make adjustments. This setting is disregarded when the traffic info map is activated.
Prominent landmarks contained in the navigation data are displayed on the map in 3D.
> "Traffic Info map"
Split screen settings The map settings for the split screen can be created separately from the main screen. 1. Open "Options". 2. "Split screen" 3. Select the settings: > "Arrow display" > "View facing north" > "View in dir. of travel" > "Perspective view" > "Exit ramp view"
Changing scale 1. Move the controller to the right until the
split screen is selected.
2. Turn the controller.
Traffic information* You can display the traffic bulletins from radio stations that broadcast the TMC (Traffic Mes- sage Channel) of a traffic information service. This information from the traffic information service is continuously updated on the basis of measurement data from traffic control centers and information on traffic congestion. During destination guidance, traffic bulletins that are relevant to areas along the route are automatically displayed and taken into account in the route planning. You can open all traffic bulletins manually using iDrive. The traffic bulletins are shown in the map dis- play.
> "Satellite images"
Satellite images* are displayed, depending on availability and resolution.
> "Perspective view in 3D"
Shows a three-dimensional depiction.
Real Time Traffic Information End-User Provisions Certain BMW models equipped with navigation have the capability to display real-time traffic information. If your system has this capability
153
