Login- Download PDF Manual
-
ba8_e70ag.book Seite 154 Freitag, 5. Juni 2009 11:42 11
the following additional terms and conditions apply: An End-User shall no longer have the right to use the Traffic Data in the event that the End- User is in material breach of the terms and con- ditions contained herein. A. Total Traffic Network, a division of Clear Channel Broadcasting, Inc. ("Total Traffic Net- work") holds the rights to the traffic incident data and RDS-TMC network through which it is delivered. You may not modify, copy, scan or use any other method to reproduce, duplicate, republish, transmit or distribute in any way any portion of traffic incident data. You agree to indemnify, defend and hold harmless BMW of North America, LLC. ("BMW NA") and Total Traffic Network, Inrix, Inc. (and their affiliates) against any and all claims, damages, costs or other expenses that arise directly or indirectly out of (a) your unauthorized use of the traffic incident data or the RDS-TMC network, (b) your violation of this directive and/or (c) any unautho- rized or unlawful activities by you in connection herewith. B. Total Traffic Network traffic data is informa- tional only. User assumes all risk of use. Total Traffic Network, BMW NA, and their suppliers make no representations about content, traffic and road conditions, route usability, or speed. C. The licensed material is provided to license "as is," and "where is." Total Traffic Network, including, but not limited to, any and all third party providers of any of the licensed material, expressly disclaims, to the fullest extent permit- ted by law, all warranties or representations with respect to the licensed material (including, without limitation, that the licensed material will be error-free, will operate without interruption or that the traffic data will be accurate), express, implied or statutory, including, without limita- tion, the implied warranties of merchantability, non-infringement fitness for a particular pur- pose, or those arising from a course of dealing or usage of trade. D. Neither Total Traffic Network, Inrix, Inc. nor BMW NA will be liable to you for any indirect, special, consequential, exemplary, or incidental
154
damages (including, without limitation, lost rev- enues, anticipated revenues, or profits relating to the same) arising from any claim relating directly or indirectly to use of the traffic data, and even if Total Traffic Network, Inrix, Inc. or BMW NA is aware of the possibility of such damages. These limitations apply to all claims, including, without limitation, claims in contract and tort (such as negligence, product liability and strict liability). Some states do not allow the exclusion or limitation of incidental or conse- quential damages, so those particular limita- tions may not apply to you.
Activating/deactivating reception 1. "Navigation" 2. Open "Options". 3. Activate/deactivate "Receive Traffic Info". In many metropolitan areas you can receive traffic information broadcast by radio stations. The traffic conditions are monitored by traffic control centers and the traffic information is updated periodically. During destination guidance, the traffic bulle- tins relevant to your planned route are automat- ically shown. Whether destination guidance is active or not, you can have the traffic informa- tion displayed in the map view or in the traffic info list.
Traffic bulletins in a list A list of the traffic bulletins can be opened via the menu or map display.
Opening traffic bulletins 1. "Navigation" 2. "Map" 3. Move the controller to the left. 4. Select the 5. "Traffic Info"
symbol.
First, the traffic bulletins on the planned route are displayed. The traffic bulletins are sorted in the order of their distance from the current vehicle position. 6. Select a traffic bulletin.
ba8_e70ag.book Seite 155 Freitag, 5. Juni 2009 11:42 11
Additional information can be displayed for some traffic bulletins: 1. Select the 2. Additional information is displayed. 3. To exit from the menu:
symbol.
Move the controller to the left.
Traffic bulletins in the map When the traffic info map is activated, the pic- ture on the Control Display is switched to a grayscale. This permits an optimized depiction of traffic information. The day/night mode is dis- regarded in this setting. 1. "Navigation" 2. "Map" 3. Open "Options". 4. "Settings" 5. Activate "Traffic Info map":
The map is optimized to display traffic infor- mation. Symbols for the special destina- tions are no longer displayed.
Symbols in map view The symbols of traffic obstructions are dis- played differently, depending on the scale of the map and location of the traffic obstruction in relation to the route.
> Smaller map scale, e.g. 1 mile/2 km: white
sign with the traffic obstruction symbol > Larger map scale, e.g. 50 miles/100 km: white sign with an arrow in the relevant direction
Additional information in the map display Depending on the map scale, the length, direc- tion, and effects of a traffic obstruction are depicted by traffic symbols in the map or by bars along the planned route.
Filtering of traffic bulletins You can filter which traffic bulletins are to be displayed by the system: 1. "Navigation" 2. "Traffic Info" 3. Open "Options". 4. "Traffic Info categories" 5. Select the desired category.
Traffic bulletins of the selected category are displayed. > Traffic bulletins on incidents along the route
are always displayed.
> For your own safety, traffic bulletins that notify you of potentially dangerous situa- tions, such as wrong-way drivers, cannot be hidden.
Traffic bulletins during destination guidance System response will vary depending on whether or not "Dynamic guidance" is selected. Information on sources of great danger, such as wrong-way drivers, is displayed regardless of the setting.
155
ba8_e70ag.book Seite 156 Freitag, 5. Juni 2009 11:42 11
Traffic obstructions The system calculates the optimized route, tak- ing into consideration traffic obstructions and road types.
Selecting a detour You can set whether individual traffic obstruc- tions or all of them are taken into account in the route planning. 1. "Navigation" 2. "Traffic Info" 3. Select the traffic obstruction that is to be
taken into consideration.
4. "Activate detour"
Taking into consideration all traffic obstructions 1. "Navigation" 2. "Traffic Info"
First, the traffic bulletins on the planned route are displayed. The traffic bulletins are sorted in the order of their distance from the current vehicle position.
3. Select "Recomm. detour", if necessary. "Dynamic guidance" is automatically activated.
156
ba8_e70ag.book Seite 157 Freitag, 5. Juni 2009 11:42 11
What to do if …
What to do if … > the current position cannot be displayed?
The position is in an unrecognized region, in a poor reception area, or the system is in the process of determining the position. Reception is best when you have an unob- structed view to the sky.
> the destination guidance does not accept
an address without the street name? A downtown area cannot be determined for the town or city that has been entered. Input any street in the selected town/city and start destination guidance.
> the destination guidance does not accept a
destination? The destination data is not contained in the navigation data. Select a destination that is as close as possible to the original.
> the letters for a destination cannot be
selected during destination entry? Stored data do not contain the data of the destination. Select a destination that is as close as possible to the original.
> the map view is displayed in grayscale?
When the traffic info map is activated, the picture on the Control Display is switched to a grayscale. This permits an optimized depiction of traffic information.
> Voice instructions are no longer issued before intersections during destination guidance? The area has not been fully recorded yet, or you have left the recommended route and the system requires a few seconds to calcu- late a new route suggestion.
157
ba8_e70ag.book Seite 158 Freitag, 5. Juni 2009 11:42 11
ba8_e70ag.book Seite 159 Freitag, 5. Juni 2009 11:42 11
Entertainment Entertainment
Operation of the radio and CD as well as their tone settings are described in this chapter.
ba8_e70ag.book Seite 160 Freitag, 5. Juni 2009 11:42 11
On/off and tone
The following audio and video sources share the same control elements and adjustments: > Radio > CD/DVD player > CD/DVD changer* > Video > External devices, e.g. MP3 player
Controls The audio and video sources can be controlled using: > Buttons near the CD/DVD player > iDrive > Buttons on the steering wheel, refer to
page 11
> Programmable memory buttons, refer to
page 20
> Voice activation system
Buttons near the CD/DVD player
1 Sound output for entertainment on/off,
volume > Press: switch on/off
When you switch on the unit, the last set radio station or track is played.
> Turn: adjust volume
Ejecting CD/DVD
3 CD/DVD drive
160
Station scan/track search
> Change the radio station > Select track for CD/DVD player and CD/
DVD changer and certain multimedia devices
5 MODE: change the audio and video
sources
6 FM/AM: change the radio station wave-
band
Switching on/off To switch the Entertainment sound output on and off: Press button 1 next to the CD/DVD player.
This symbol on the Control Display indicates
that sound output is switched off. The sound output is available for approx. 20 minutes after the ignition was switched off. Switch on the sound output again for this pur- pose.
Adjusting volume Turn button 1 next to the CD/DVD player until the desired volume is obtained. You can also adjust the volume with buttons on the steering wheel, refer to page 11. The setting is stored for the remote control cur- rently in use.
Tone control You can alter various tone settings, e.g. treble and bass or the speed-dependent volume increase. The tone settings are set for all audio sources at once. The settings are stored for the remote control currently in use.
ba8_e70ag.book Seite 161 Freitag, 5. Juni 2009 11:42 11
Treble, bass, balance, fader > "Balance": left/right volume distribution > "Fader": front/rear volume distribution
Adjustments 1. "CD/Multimedia", "Radio" or "Settings". 2. "Tone"
4. Select the desired setting.
3. Select the desired tone setting.
4. To adjust: turn the controller. 5. To store: press the controller.
Equalizer* You can set individual sound frequency ranges. 1. "CD/Multimedia", "Radio" or "Settings". 2. "Tone" 3. "Equalizer"
5. To adjust: turn the controller. 6. To store: press the controller.
Multichannel playback, surround* You can choose between stereo and multichan- nel playback, surround. 1. "CD/Multimedia", "Radio" or "Settings". 2. "Tone" 3. "Surround"
Multichannel playback, surround, is simulated when playing back an audio track in stereo. Surround is automatically activated or deacti- vated, depending on the audio track selected.
Volume > "Speed volume": adaptation of the volume
as a function of vehicle speed
> "PDC"*: volume of the PDC signal tone in comparison to entertainment sound output > "Gong": volume of the signal tone, e.g. for the safety belt reminder, in comparison to entertainment sound output
161
ba8_e70ag.book Seite 162 Freitag, 5. Juni 2009 11:42 11
Adjustments 1. "CD/Multimedia", "Radio" or "Settings". 2. "Tone" 3. "Volume settings" 4. Select the desired volume setting.
5. To adjust: turn the controller. 6. To store: press the controller.
Resetting tone settings You can reset all tone settings to the default setting. 1. "CD/Multimedia", "Radio" or "Settings". 2. "Tone" 3. "Reset"
162
ba8_e70ag.book Seite 163 Freitag, 5. Juni 2009 11:42 11
Radio
Your radio is designed for reception of the fol- lowing stations: > FM and AM > HD Radio* > Weather Radio* > satellite radio*
Selecting a station
Press the button if the sound output is switched off. 1. "Radio"
2. "FM" or "AM"
3. Select the desired station.
Changing stations Turn the controller and press it or press the direction or press the buttons on the steering wheel, refer to page 11.
button for the corresponding
Selecting frequency manually In "Manual", you can set stations that are being received in addition to those being displayed. 1. "Radio" 2. "FM" or "AM" 3. "Manual" 4.
In the "AM" band, select from among "AM"*, "AM", and "AM".
5. Call up the frequency.
6. To store the station: press the controller.
163
ba8_e70ag.book Seite 164 Freitag, 5. Juni 2009 11:42 11
Storing stations
Using iDrive 1. "Radio" 2. "FM" or "AM" 3. Select the desired station.
4. "RDS"
The setting is stored for the remote control cur- rently in use.
HD Radio* Many radio stations transmit analog and digital signals. If a digital radio network is available, these stations can be received digitally and thus with improved sound quality. License conditions HD Radio™ technology is manufactured under U.S. and Foreign Patents licensed from iBiquity Digital Corp. HD Radio™ and the HD and HD Radio logos are proprietary trademarks of iBiq- uity Digital Corp.
Activating/deactivating digital radio reception 1. "Radio" 2. "FM" or "AM" 3. Open "Options". 4. "HD Radio" The setting is stored for the remote control cur- rently in use.
This symbol is displayed when a station is
being received digitally. In areas in which the station is not continuously received in digital mode, playback switches between analog and digital reception. Any time shift between these two broadcasts can lead to repetitions or interruptions in the output. In this case, switch off digital radio reception.
4. Press the controller again. 5. Select the desired memory location.
The station is stored.
The stations are stored for the remote control currently in use.
Using programmable memory buttons You can store a station on the programmable memory buttons, refer to page 20. 1. Select a station. 2.
Press the desired button
...
for a longer period.
Radio Data System RDS* In the FM frequency range, additional informa- tion is transmitted via RDS. If the reception con- ditions are good, the station names are shown on the Control Display. If the reception is weak or disrupted, it can take some time before the station names are displayed.
Switching RDS on/off 1. "Radio" 2. "FM" 3. Open "Options".
164
ba8_e70ag.book Seite 165 Freitag, 5. Juni 2009 11:42 11
Displaying additional information Some stations broadcast additional information on the current track, such as the name of the artist. 1. Select the desired station. 2. Open "Options". 3. "Station info"
Deleting a station 1. "Radio" 2. "Presets" 3. Select the desired station. 4. Open "Options". 5. "Delete entry"
Selecting a substation 1. Select the desired station. 2. Press the controller. 3. Select the substation.
Stored stations It is possible to store up to 40 stations.
Selecting a station 1. "Radio" 2. "Presets" 3. Call up the desired station.
Storing a station The station currently selected is stored. 1. "Radio" 2. "Presets" 3. "Store station"
Weather Radio* Weather Radio is a service of the National Oce- anic and Atmospheric Administration (NOAA) of the US Department of Trade. Weather reports are repeated every 4 to 6 minutes and are routinely updated every 1 to 3 hours, more frequently as needed. Most stations operate 24 hours a day. In case of a storm, the National Weather Service interrupts the routine weather news and transmits special warning messages instead. If you have a question about NOAA Weather Radio, please contact the nearest office of the National Weather Service. Details are also provided on the Internet at www.nws.noaa.gov.
Accessing weather news flashes Operating via iDrive: 1. Switch on radio. 2. "Weather band" 3. Selecting desired channel. The station for weather news flashes may be unavailable in some regions.
4. Select the desired memory location. The list of stored stations is stored for the remote control currently in use. You can also store the stations on the program- mable memory buttons, refer to page 20.
165
ba8_e70ag.book Seite 166 Freitag, 5. Juni 2009 11:42 11
Satellite radio
General information The channels are offered in fixed packages. Packages must be activated by telephone.
Navigation bar
Symbol
Function Changing list view Selecting category Entering channel directly Time shift Accessing favorites, selecting the My Favorites category Managing favorites Traffic Jump
The functions of the symbols of the navigation bar can also be stored on the programmable memory buttons, refer to page 20.
Managing subscription Clear reception is required for activating and deactivating channels. Reception is best when you have an unobstructed view to the sky. The channel name is displayed in the status line.
Activating channels The category Unsubscribed Channels includes all channels that are not activated. 1. "Radio" 2. "Satellite radio" 3. "Categories"
166
4. Select the category Unsubscribed Chan-
nels.
5. Select desired channel.
The telephone number and electronic serial number, ESN, are displayed.
6. Dial the telephone number to have the
channels activated.
This telephone number can also be used to deactivate the channels once more.
Deactivating channels 1. "Radio" 2. "Satellite radio" 3. Open "Options". 4. "Manage subscription"
ba8_e70ag.book Seite 167 Freitag, 5. Juni 2009 11:42 11
The telephone number and electronic serial number, ESN, are displayed. 5. Call Sirius to deactivate the channels.
Selecting channels You can only listen to activated channels. The selected channel is stored for the remote control currently in use.
Using iDrive 1. "Radio" 2. "Satellite radio" 3. Select "All Channels" or the desired cate-
gory.
4. Select desired channel.
Using the button near the CD/DVD player Press the direction. The next channel is selected.
button for the corresponding
Using direct channel entry 1. "Radio" 2. "Satellite radio"
"Select channel"
3. 4. Turn the controller until the desired channel
is displayed and press the controller.
Storing channel 1. "Radio" 2. "Satellite radio" 3. Select "All Channels" or the desired cate-
gory.
4. Select desired channel. 5. Press the controller again. 6. Press the controller again in order to con- firm selection of the highlighted channel.
7. Select the desired memory location. The channels are stored for the remote control currently in use. You can also store the channels on the pro- grammable memory buttons, refer to page. 20.
Change list view The list view changes each time the first symbol on the navigation bar is pressed. Information about the channel is displayed.
Symbol
Function Channel name Artist Track
167
Time shift menu
Symbol
Function Go to live broadcast Playback/pause Next track Previous track Fast forward Reverse
Storing favorites Up to 30 favorites can be stored in the favorites list. Possible favorites include artist, track, game, league, and team.
Storing artist, track, or game Only current broadcasts can be stored as favor- ites. The channel information must be available. 1. "Radio" 2. "Satellite radio" 3. Select "All Channels" or the desired cate-
gory.
4. Select desired channel. 5. Press the controller again. 6. Select artist, track, or game.
Storing league or team Leagues or teams can be added to the favorites from a selection list. 1. "Radio" 2. "Satellite radio" 3. 4. "Add sports information"
"Manage favorites"
ba8_e70ag.book Seite 168 Freitag, 5. Juni 2009 11:42 11
Select category 1. "Radio" 2. "Satellite radio" 3. "Categories" 4. Select the desired category.
Time shift Approximately one hour of the channel cur- rently being listened to is temporarily stored in a cache memory. The signal must be available. The stored audio track can be played back at a different time from the live broadcast. If the cache memory is full, then the older tracks are recorded over. The cache memory is deleted if a new channel is selected.
Accessing Time shift 1. "Radio" 2. "Satellite radio" 3. Open "Options". 4.
"Replay - Time Shift"
A new window appears in the display.
> The red arrow indicates the current play-
back position.
> The time difference from the live broadcast is displayed next to the cache memory bar. > During a live broadcast, "live" is displayed
next to the cache memory bar.
168
ba8_e70ag.book Seite 169 Freitag, 5. Juni 2009 11:42 11
5. Select the desired league. 6. Select "Add all teams" or a desired team.
Accessing favorites If an activated favorite is being played, then the message "Playing favorite!" appears for approx. 20 seconds. Select being displayed.
"Favorites" while the message is
The displayed favorite will be played. If it receives no notification, the system switches into the My Favorites category. All of the favorites currently being broadcast can be selected from a list.
Managing favorites
Activating/deactivating favorites Favorites can be activated or deactivated glo- bally and individually. 1. "Satellite radio" 2. 3. Select "Activate alert" or desired favorites.
"Manage favorites"
The setting is stored for the remote control cur- rently in use.
"Manage favorites"
Deleting favorites 1. "Satellite radio" 2. 3. Highlight the favorites you wish to delete. 4. Open "Options". 5. "Delete entry"
Traffic Jump Traffic and weather information for a selected region are broadcast at intervals of a few min- utes.
Selecting region 1. "Radio" 2. "Satellite radio" 3. Open "Options". 4. "Set Jump" 5. Select the desired region. The region is stored for the remote control cur- rently in use.
"Jump to:"
Activating/deactivating Jump 1. "Radio" 2. "Satellite radio" 3. As soon as information about the selected region becomes available, it is broadcast. A new panel appears in the display. Cancel Traffic Jump: "Cancel".
Symbol
Meaning Information will be broadcast soon. Information is currently being broadcast.
Select one of the symbols to deactivate Traffic Jump.
169
ba8_e70ag.book Seite 170 Freitag, 5. Juni 2009 11:42 11
Automatic update About twice a year, Sirius carries out an update of the names and positions of the channels. The update occurs automatically and can take sev- eral minutes.
Notes > Under some circumstances, reception may not be possible, e.g. under certain environ- mental or topographical conditions. The satellite radio has no influence on this.
> The signal may not be available in tunnels or underground garages or near trees, moun- tains, or other powerful sources of radio interference.
170
ba8_e70ag.book Seite 171 Freitag, 5. Juni 2009 11:42 11
CD/DVD player and CD/DVD changer
CD/DVD playback
Starting playback
Inserting CD/DVD Push the CD/DVD into the drive with the labeled side facing upward. The CD/DVD is automati- cally pulled in. Playback starts automatically if the sound out- put is on. CDs/DVDs with compressed audio files can take a few minutes to read, depending on their directory structure.
Playable formats CD/DVD player > DVD: DVD-ROM, DVD-R, DVD+R, DVD-
RW, DVD+RW, DVD-R DL, DVD+R DL, DVD audio (video part only), DVD video
> CD: CD-ROM, CD-R, CD-RW, CD-DA,
VCD, SVCD
> Compressed audio files: MP3, WMA, AAC CD changer* > CD: CD-ROM, CD-R, CD-RW, CD-DA DVD changer* > DVD: DVD-ROM, DVD-R, DVD+R, DVD-
RW, DVD+RW, DVD-R DL, DVD+R DL, DVD audio (video part only), DVD video, CD: CD- ROM, CD-R, CD-RW, CD-DA, VCD, SVCD
Using iDrive Fill and insert CD/DVD magazine, refer to page 175. To start playback if a CD is already located in the player or changer: 1. "CD/Multimedia"
2. "CD/DVD" 3. Select the desired CD or DVD:
Ejecting CD/DVD Press the button next to the CD/DVD player. The CD/DVD emerges slightly from the drive.
Symbol
Function
CD/DVD player
CD/DVD changer
171
ba8_e70ag.book Seite 172 Freitag, 5. Juni 2009 11:42 11
Audio playback
5. Select the track and press the controller.
Selecting a track Press the direction repeatedly until you reach the desired track.
button for the corresponding
Audio CDs 1. "CD/Multimedia" 2. "CD/DVD" 3. Select the desired CD or DVD. 4. Select the desired track to begin playback.
Displaying information about the track* If information about a track has been stored, it is displayed automatically:
CDs/DVDs with compressed audio files* It is possible that not all of the characters on the CD/DVD will be correctly displayed, depending on the data. 1. "CD/Multimedia" 2. "CD/DVD" 3. Select the desired CD or DVD. 4. Select the directory, if necessary.
To change to a higher level directory: move the controller to the left.
> Artist > Album title > Track number on the CD/DVD > Track file name
Random play sequence The tracks of the current CD/DVD are played once in a random sequence. 1. "CD/Multimedia" 2. "CD/DVD" 3. Select the desired CD or DVD. 4. Open "Options".
172
ba8_e70ag.book Seite 173 Freitag, 5. Juni 2009 11:42 11
5. "Random"
CDs/DVDs with compressed audio files: the directories and the tracks contained therein are played back in random sequence. Random mode is switched off when the audio source is changed or the ignition is switched off.
Fast forward/reverse Press and hold the sponding direction.
button for the corre-
Automatic replay* Selected tracks, directories, or CDs/DVDs are automatically replayed.
Video playback*
Country codes Only DVDs with the code of the home region can be played back; also refer to the information on your DVD.
Code
Region USA, Canada Japan, Europe, Middle East, South Africa Southeast Asia Australia, Central and South Amer- ica, New Zealand Northwest Asia, North Africa China All regions
Starting playback For your own safety, the video image is only dis- played up to a speed of approx. 2 mph/3 km/h; in certain country-specific equipment configu- rations, the video image will only display if the hand brake is engaged.
DVD video 1. "CD/Multimedia" 2. "CD/DVD" 3. Select a DVD with video content. 4.
"DVD menu"
5. Start the DVD via the DVD menu.
VCD/SVCD 1. "CD/Multimedia" 2. "CD/DVD" 3. Select a CD/DVD with video content. 4.
"Select track"
5. Select the desired track. The CD/DVD starts to play.
173
ba8_e70ag.book Seite 174 Freitag, 5. Juni 2009 11:42 11
Language* 1. Turn the controller during playback. 2. Open "Options". 3. "Audio/language"
Video menu To open the Video menu: 1. Turn the controller during playback. 2. Press the controller when "Back" is dis-
played.
The Video menu is displayed:
Symbol
Function Open the DVD menu* Starting playback
Pause
Stop
Next chapter/next track
Previous chapter/previous track
4. Select the desired language. The languages that are available depend on the DVD.
Subtitles* Subtitles can be selected if they are contained on the DVD. 1. Turn the controller during playback. 2. Open "Options". 3. "Subtitles" 4. Select the desired language or "Do not dis-
play subtitles".
Brightness, contrast, color 1. Turn the controller during playback. 2. Open "Options". 3. "Display settings"
Fast forward
Reverse
In fast forward/reverse: the speed increases every time the controller is pressed. To stop, start playback.
DVD menu 1.
If necessary, turn the controller to open the video menu.
2.
"DVD menu"
The DVD menu is displayed. The display depends on the contents of the DVD.
> To select menu items: move and press the
controller.
> To change to the Video menu: turn the con-
troller and select "Back".
Settings for DVD/VCD For some DVDs, settings can only be made via the DVD menu; refer also to the information on your DVD.
174
ba8_e70ag.book Seite 175 Freitag, 5. Juni 2009 11:42 11
4. "Brightness", "Contrast" or "Color"
5. Turn the controller until the desired setting
is displayed and then press the controller.
Zoom Display the video image on the full screen. 1. Turn the controller during playback. 2. Open "Options". 3. "Additional options" 4. "Zoom mode"
Selecting title DVD video: 1. Turn the controller during playback. 2. Open "Options". 3. "Additional options" 4. "Select title" 5. Select the desired track. VCD/SVCD: 1. 2. Select the desired track.
"Select track"
Camera angle* The camera angle depends on the DVD.
1. Turn the controller during playback. 2. Open "Options". 3. "Additional options" 4. "Viewing angle" 5. Select the desired camera angle.
Opening the main menu, back These functions are not contained on every DVD. Therefore, they may not be available for use.
CD/DVD changer*
The BMW CD/DVD changer for six CDs/DVDs is accommodated in the glove compartment.
Controls and displays
1 Emptying CD/DVD compartments 2 LEDs under the CD/DVD slot
flash when CDs/DVDs can be inserted.
3 Buttons for CD/DVD compartments
The LED lights up when a CD/DVD is in the compartment.
4 CD/DVD slot 5 Loading CD/DVD compartments
175
