Login- Download PDF Manual
-
1. Push the cover to one side, arrow 1. 2. Press the button, arrow 2.
The CD magazine is ejected.
Inserting/removing CDs from the CD magazine
When loading CDs into or removing them from the CD magazine, hold them at the edge and do not touch the reflective signal-sensing area. Inserting CDs: Insert the CD in its slot with the label side on top. Removing CDs: Pull out the desired drawer, refer to arrow, and remove the corresponding CD.
147
Malfunctions with individual CDs/DVDs If malfunctions only occur with individual CDs/ DVDs, one of the following factors may be the cause.
Self-recorded CDs/DVDs Possible reasons for malfunctions with self- recorded CDs/DVDs are, e.g., inconsistent data-creation or recording processes, or poor quality or high age of the CD/DVD blank. Only label CDs/DVDs on the top, with a pen designed for this purpose.
Damaged CDs/DVDs Avoid leaving fingerprints, as well as dust, scratches or moisture on the CDs/DVDs. Keep CDs/DVDs in protective sleeves or cases. Do not subject CDs/DVDs to temperatures over 506, high levels of humidity or direct sunlight.
CDs/DVDs with copy protection CDs/DVDs are often copy-protected by the manufacturer. This can mean that some CDs/ DVDs cannot be played or can only be played to a limited extent.
Inserting the CD magazine
Insert the CD magazine all the way in the direc- tion of arrow 1 and close the cover, arrow 2. The CD changer automatically reads in the loaded CDs and is then ready for operation.
Notes
BMW CD/DVD players and changers are officially designated Class 1 laser prod- ucts. Do not operate if the cover is damaged, otherwise severe eye damage can result. Do not use self-recorded CDs/DVDs with labels applied as these can become detached during playback due to heat build-up and can cause irreparable damage to the device. Only use round CDs/DVDs with a standard diameter of 12 cm and do not play CDs/DVDs with an adapter, e.g. Single-CDs, otherwise the CDs or the adapter can jam and will no longer eject. Do not use a combined CD/DVD, e.g. DVDPlus, as otherwise the CD/DVD can jam and will no longer eject.<
General malfunctions BMW CD/DVD changers and players have been optimized for performance in vehicles. In some instances they may be more sensitive to faulty CDs/DVDs than stationary devices would be. If a CD/DVD cannot be played, first check if it has been inserted correctly.
Humidity High levels of humidity can lead to condensa- tion on the CD/DVD or the laser's scan lens and temporarily prevent playback.
148
External audio device
You can connect an external audio device, for instance an MP3 player, and play audio tracks over the car's loudspeaker system. You can adjust the tone using iDrive.
Connecting Lift up the center armrest.
3. Select "Audio Aux" and press the control-
ler.
4. Adjust volume and tone, if necessary.
1 Power supply for your external audio
device: Socket with removable cap
2 Connection for audio playback:
3.5 mm phono connector
To play audio tracks through the car's loud- speaker system, connect the headset or line- out port of the external device to connection 2.
Starting audio playback The audio device must be switched on. iDrive concept, refer to page 16. 1. Press the
button.
This opens the start menu.
2. Move the controller backwards to call up
"Entertainment".
149
Communications Communications
This chapter describes how to use BMW Assist and TeleService.
i
> Voice commands, refer to page 156
You can get information about activating the portable phone in the separate Owner's Manual for the Full Preparation Package Cellphone.Making calls with the car phone: BMW Assist calls You can use the car phone via the hands-free system for BMW Assist calls. When the status information "BMW Assist" or "BMW Service" is displayed in "Communica- tion", only BMW Assist calls are possible. It may not be possible to establish a telephone connection using the portable phone while a connection is being established to BMW Assist or while a call to BMW Assist is already in progress. If this happens, you must unpair the portable phone and the vehicle if you wish to place a call with the portable phone.
Hands-free system The hands-free microphone is located on the headliner. The hands-free system is activated whenever you establish or receive a call using: > The buttons on the steering wheel > iDrive > Voice commands
Telephoning
Safety notes
For your own safety A car phone makes life more convenient in many ways, and can even save lives in an emer- gency. While you should consult your portable phone's separate Owner's Manual for a detailed description of safety precautions and informa- tion, we request that you direct your particular attention to the following:
Adjustments
Only make entries when the traffic situa- tion allows you to do so. Do not hold the portable phone in your hand while you are driv- ing; use the hands-free system instead. If you do not observe this precaution, your being dis- tracted can endanger vehicle occupants and other road users. BMW discourages the use of portable phones or other mobile communications devices inside the vehicle without a direct connection to an outside antenna. Otherwise, interferences between vehicle electronics systems and the mobile communication device cannot be ruled out. Moreover, there is no guarantee that the radiation generated when such devices are transmitting will be dissipated out of the vehi- cle's interior.<
Care instructions You can find what you need to know about car- ing for your portable phone in the separate Car- ing for your vehicle brochure and in the portable phone Owner's Manual.
Operating options You can operate the portable phone* using: > The steering wheel, refer to page 10
> iDrive, refer to page 153152
Adjusting volume
Accepting a call
Turn the knob during a call to select the desired volume. This volume for the hands-free system is main- tained, even if the other audio sources are set to minimum volume. The setting is stored for the remote control cur- rently in use.
Operation via iDrive Once the portable phone is connected to the vehicle via Bluetooth, the following functions can be used via iDrive: > Dialing phone numbers > Phone book > Top 8
> Redialing > Displaying accepted calls > Displaying missed calls iDrive concept, refer to page 16. 1. Press thebutton.
This opens the start menu.
2. Move the controller forwards to call up
"Communication".
Receiving calls If you have the phone number of the caller stored in the phone book and the phone num- ber is transmitted, the name of the entry is dis- played.
Select "Accept" and press the controller.
Rejecting a call Select "Reject" and press the controller. The caller is diverted to your mailbox if it has been activated.
Calling
Dialing phone numbers 1. Select "Phone" and press the controller.
2. Select "Dial" and press the controller. 3. To enter the phone number: select digits or letters individually and press the controller. Always enter the complete phone number consisting of national dialing code, area code, and phone number. The letters correspond to the numbers on the keypad of the portable phone. To delete an incorrect number or letter: Move the controller towards the right to select
, and press the controller.
153
i
4. Select "Dial number" and press the control-
ler.
Dialing from phone book 1. Select "Phone" and press the controller.
Ending a call 1.
If necessary, select the telephone number.
2. Select "A - Z" and press the controller:
The entries in the phone book of the porta- ble phone are displayed on the Control Dis- play; they are sorted alphabetically. To run a targeted search for an entry, select the first letter of the entry and press the controller. The first entry that starts with this letter is displayed.
3. Select the desired entry.
2. Press the controller.
Additional menu items are displayed when the hands-free system is switched on.
3. Select "End call" and press the controller.
4. Press the controller.
Other menu items are displayed.
5. Select "Call" and press the controller.
The system dials the number.
If different phone numbers are stored in the portable phone under one name, e.g. office and home, the name is shown once for each phone number.
Adding digits to phone numbers You can add other digits to a phone number stored in the phone book, e.g. to call a specific extension:
Phone book Once the portable phone is connected to the vehicle via Bluetooth, the phone book is trans- mitted from the portable phone to the vehicle. Loading the phone book can take several min- utes.
154
1. Select "Phone" and press the controller. 2. Select "A - Z" and press the controller. 3. Select the desired entry. 4. Press the controller.
Other menu items are displayed.
5. Select "Add digits" and press the controller. 6. To add to the phone number: select digits
individually and press the controller.
7. Select "Dial number" and press the control-
ler.
Lists Your phone can store phone numbers you have dialed and incoming calls in lists. If the caller is entered in the phone book, the name of the entry is displayed instead of the phone number. You can select the desired subscriber from the list and establish the connection. Four lists are available: > "Top 8"
The eight numbers called most frequently via the "A - Z" list are automatically stored in the Top 8 list. The number called most often appears at the top of the list.
> "Redial"
The last eight phone numbers you have dialed are automatically stored. The last number dialed is at the top of the list.
> "Received calls"
The phone numbers of the last eight calls accepted while the portable phone was connected to the vehicle via Bluetooth are stored. This requires the telephone number of the caller to have been sent.
> "Missed calls"
The phone numbers of the last eight calls missed while the portable phone was con- nected to the vehicle via Bluetooth are stored. This requires the telephone number of the caller to have been sent.
Dialing from a list To select an entry and establish a connection:
1. Select "Phone" and press the controller. 2. Select the list:
> "Top 8" > "Redial" > "Received calls" > "Missed calls"
3. Press the controller. 4. Select the desired entry.
5. Press the controller.
Other menu items are displayed.
6. Select "Call" and press the controller.
The system dials the number.
Deleting an individual entry 1. Select the desired entry from the list. 2. Press the controller.
Other menu items are displayed.
155
i
3. Select "Delete" and press the controller.
2. Press the controller.
The entry is deleted.
Other menu items are displayed.
3. Select "Keypad" and press the controller. 4. Select the desired digits or letters* and
press the controller. The letters correspond to the numbers on the keypad of your portable phone. Each digit is sent immediately.
Deleting the entire list 1. Select an entry from the list. 2. Press the controller.
Other menu items are displayed.
3. Select "Delete all numbers" and press the
controller. The list is deleted.
Touch tone dialing Touch tone numbers are required for access to network services or for controlling devices, e.g. for remote querying on an answering machine. This function can only be used during an exist- ing connection. 1. Establish connection.
156
Operation by voice*
The concept You can operate your portable phone without having to remove your hands from the steering wheel. The system operates on the basis of voice commands that you will learn easily after using them a few times. In addition, you are also supported by instructions or questions.
Symbols used
{...} Indicates voice commands. {{...}} Indicates system announcements.
Saying commands With the ignition switched on: 1. Press the
button on the steering wheel.
A sound signal indicates operating readi- ness.
2. Say voice commands.
To have the system list the voice com- mands possible in each case:
{Options}.
Canceling operation by voice Press button on steering wheel or
{Cancel}.
In dialogs where text is spoken, e.g. a name rather than a command, canceling is only possi- ble using the button. The dialog is automati- cally interrupted when an incoming call is received.
Voice commands In addition to the commands described in this Owner's Manual, alternative commands are often possible for the same functions, e.g.:
{Dial name} or {Name}.
The system recognizes digits from zero to nine. You can say each digit individually or group them into a sequence of three to five digits to accelerate the input.
157
i
Example: Dialing phone numbers Start the dialog: Press the Voice command {Dial number} e.g. {123 456 7890} {Dial}
button on the steering wheel. Response {{Please say the number}} {{123 456 7890. Continue?}} {{Dialing number}}
Adjusting volume You can adjust the volume for the instructions from the system:
Calling
Dialing phone numbers
1.
{Dial number}. The dialog for establishing a telephone connection is opened. 2. Say the phone number.
3.
For telephone calls abroad, say {Plus} and then the country code. {Dial}. The connection to the desired sub- scriber is established.
Correcting phone numbers After the last spoken sequence of digits has been repeated by the system, you can delete this sequence of digits. {Correct number}. The digits are deleted.
The command {Correct number} can be repeated as often as you like.
Deleting input {Delete} is used to delete all the digits entered so far.
Voice phone book Operating by voice command requires a per- sonal voice phone book. The entries must be made by speaking them out loud and they are independent from your portable phone's memory. This means that it is not possible to use voice commands to call phone numbers stored in the portable phone or to store new numbers there.
Turn the button during an instruction to select the desired volume. This volume for the instructions is maintained, even if the other audio sources are set to mini- mum volume. The setting is stored for the remote control cur- rently in use.
158
Storing an entry An entry always consists of a name and phone number.
1.
{Save name}. The dialog for storing a name is opened.
2. Say the name and repeat it upon
request. The spoken length of the names in the phone book must not exceed approx. 2 seconds.
3. Say the phone number when prompted. 4. To store the phone number:
{Save}.
Selecting an entry The connection to the phone number of the selected entry is established.
1.
{Dial name}. The dialog for selecting an entry is opened.
2. Say the name when prompted. 3. Confirm the prompt with {Yes}.
Having entries read aloud and selecting You can have all the entries of your voice phone book read aloud in the order of input and select a certain entry to establish a connection:
1.
2.
{Read phone book}. The dialog for having the phone book read is opened. {Dial number} when the desired entry is read aloud.
Redialing The {Redial} command calls up "Redial".
Deleting an entry You can delete any entry from the voice phone book. 1.
{Delete name}. The dialog for deleting an entry is opened.
2. Say the name when prompted. 3. Confirm the prompt with {Yes}.
Deleting all entries {Delete phone book} deletes all entries in the phone book.
1.
{Delete phone book}. The dialog for deleting phone book is opened.
2. Confirm the prompt with {Yes}. 3. Confirm the repeated prompt with
{Yes}.
Notes
The voice commands in English were available as of this printing. Other lan-
guages are currently in preparation. To operate the portable phone via the voice command sys- tem, refer to page 22.<
Important for voice commands For voice commands, bear in mind the follow- ing: > Issue the commands smoothly and at nor- mal volume, avoiding excessive emphasis and pauses.
> Keep the doors, windows and glass sunroof
closed to prevent interference from ambi- ent noise.
> Avoid other sources of noise in the vehicle while speaking, and ask other vehicle occu- pants to refrain from talking while you are using the system.
159
t
TeleService , BMW Assist
TeleService TeleService supports you when communicat- ing with a BMW center. The built-in car phone can be used to transmit data regarding the ser- vice status of your vehicle or regarding legally mandated inspections directly to your BMW center. This is the same data that is also stored for CBS Condition Based Service in the master key. Your BMW center can then contact you, and you can make an appointment that suits you while you are still on the road. Your advan- tage here is that your BMW center can prepare in advance for the required maintenance work. The TeleService functions are country-specific: depending on the country in which you are driv- ing, data about your vehicle's service status or regarding legally required inspections are transmitted to your BMW center either auto- matically before a service due date or when you place a call to the BMW center. Your BMW cen- ter will be glad to provide more detailed infor- mation.
BMW Assist BMW Assist provides you with other services in addition to TeleService. For example, the posi- tion data of your vehicle can be transferred to the BMW Assist response center if an emer- gency call* has been initiated. Many functions of BMW Assist depend on the individually agreed contract. Data transmission, e.g. of the CBS Condition Based Service, differs from country to country. The subscriber agreement must be completed successfully before using the BMW Assist ser- vices. You can also utilize BMW Assist services via the Internet. The service package is continually expanded.
Requirements You can use TeleService or BMW Assist when the following requirements are met: > The installed car phone is logged on to a portable telephone network. This network must be capable of transmitting the ser- vices.
> To transmit position data, the vehicle must be able to determine the current position. This can be displayed on the Control Dis- play.
> In order to enable and update TeleService
or BMW Assist, a GPS signal must be present.
> For BMW Assist: you must have applied for BMW Assist at your BMW center or BMW customer service.
Enabling TeleService or BMW Assist For you to be able to use the services of TeleService or BMW Assist, these must be enabled.
Requirements > Make sure that the vehicle can determine its
current location. As a rule, this is possible when you are in the open.
> Leave radio readiness switched on while
connecting to the system.
Enabling iDrive concept, refer to page 16. 1. Press the
button.
This opens the start menu.
2. Press the controller to open the menu. 3. Select "Communication settings" and
press the controller.
160
4. Select "BMW Service settings" and press
the controller.
5. Select "Service Status" and press the con-
troller.
6. Select "Enable services" and press the con-
troller. TeleService and, if applicable, BMW Assist are enabled; data exchange with the service center starts.
Enabling takes a few minutes. The status is dis- played on the Control Display. If you open another menu, the enabling process continues to run in the background.
Services offered The following special features apply for the ser- vices of TeleService and BMW Assist:
> The services offered are country-specific. > Voice contact is established or data are
transferred, depending on the equipment and the country. In some countries, it is possible to do both.
> The data transferred can be the vehicle
data, your current position or the data of the CBS Condition Based Service.
Automatic service notification* The data on the service status of your vehicle or on legally mandated inspections is transmitted automatically directly to your BMW center prior to the due date. You can check when the BMW center was notified. iDrive concept, refer to page 16. 1. Open the start menu. 2. Press the controller to open the menu. 3. Select "Service" and press the controller. 4. Select "Service requirements" and press
the controller.
5. Select "Service notification" and press the
controller.
161
t
Roadside Assistance You can call the Roadside Assistance* of the BMW Group should you require help in the event of a breakdown. iDrive concept, refer to page 16. 1. Press the
button.
This opens the start menu.
2. Move the controller forwards to select
"Communication".
3. Select "BMW Assist" and press the control-
ler.
4. Select "BMW Service" and press the con-
troller.
Setting up contact to your BMW center or BMW Customer Relations You can contact your BMW center, e.g. to arrange a service appointment. For information related to your vehicle, call the BMW Customer Relations. A prerequisite for this is that your portable phone is connected to the vehicle. iDrive concept, refer to page 16. 1. Open the start menu. 2. Press the controller to open the menu. 3. Select "Service" and press the controller. 4. Select "BMW Service" and press the con-
troller.
5. Select the desired BMW center:
> "Service Request" > "Customer Relations"
5. Select "Roadside Assistance" and press
the controller.
If the current position can be determined, the current vehicle location is displayed. 6. Select "Start service" and press the con-
troller.
Contact to Roadside Assistance will be estab- lished. To adjust the license plate, please contact your BMW center.
162
6. Press the controller. 7. Select "Start service" and press the con-
troller.
Contact to the desired BMW center will be established.
Adapting TeleService or BMW Assist
Displaying and updating services If the services offered by TeleService or BMW Assist change, you will be notified. In this case you should update the service functions. 1. Open the start menu. 2. Press the controller to open the menu.
3. Select "Communication settings" and
press the controller.
4. Select "BMW Service settings" and press
the controller.
5. Select "Service Status" and press the con-
troller. The current services available from TeleService or BMW Assist are displayed. If applicable, select "Options" and press the controller.
6.
7. Select "Update services" and press the
controller.
Terminating services If you terminate the services, your vehicle will not be equipped to contact the BMW Assist call center. 1. Open the start menu. 2. Press the controller to open the menu. 3. Select "Communication settings" and
press the controller.
4. Select "BMW Service settings" and press
the controller.
5. Select "Service Status" and press the con-
troller.
6. Select "Options" and press the controller. 7. Select "Terminate services" and press the
controller.
The use of TeleService or BMW Assist is blocked. To cancel the service block, the sys- tem must be reactivated, refer to page 160. Your contractual agreement is not affected by this.
The automatic service notification can be dis- abled separately. Please contact your BMW center for this purpose. Enable TeleService and, if applicable, BMW Assist once again to log on again.
Displaying vehicle data When TeleService or BMW Assist is activated, the license plate and the vehicle identification number of your vehicle can be displayed. 1. Open the start menu. 2. Press the controller to open the menu. 3. Select "Communication settings" and
press the controller.
4. Select "BMW Service settings" and press
the controller.
5. Select "Profile" and press the controller.
To adjust the license plate, please contact your BMW center.
BMW Contact* You can establish a voice connection to the fol- lowing services without enabling BMW Assist as long as your portable phone is connected to the vehicle: > Roadside Assistance* of the BMW Group if you need help in the event of a breakdown > BMW Service if you wish to schedule a ser-
vice appointment, for example
> BMW Customer Relations for information
related to your vehicle
iDrive concept, refer to page 16.
163
t
1. Press the
button.
This opens the start menu.
2. Move the controller forwards to select
"Communication".
3. Select "BMW Contact" and press the con-
troller.
4. Select "BMW Contact Numbers" and press
the controller.
5. Select one of the following menu items and
press the controller: > "Roadside Assistance" > "Customer Relations" > "Service Request"
6. Select "Call" and press the controller. Contact will be established.
164
e
165
Mobility Mobility
This section helps you maintain your car's mobility by supplying important information on vital topics including fuels and lubricants, wheels and tires, service, maintenance and breakdown assistance.
g
Refueling
Always switch off the engine before refu- eling. If you do not, fuel cannot be filled into the tank and a message will appear on the Control Display.<
Always observe all applicable precautions and regulations when handling fuels.
Never carry spare fuel containers in your vehi- cle. Whether empty or full, these containers can leak, cause an explosion, or lead to fire in the event of a collision.<
Gas cap
Opening
1. Open fuel filler door. To do so, lightly press
the rear edge.
2. Turn the gas cap counterclockwise. 3. Place the gas cap in the bracket attached to
the fuel filler door.
Closing Fit the cap and turn it clockwise until you clearly hear a click.
1. Remove the cover from the side panel of the
luggage compartment.
2. Pull the knob with the fuel pump symbol.
The fuel filler door is released.
Observe the following when refueling
When handling fuels always observe any safety guidelines posted at the service
station.< When refueling, insert the filler nozzle com- pletely into the filler pipe. Lifting the filler nozzle during refueling leads to > premature pump shutoff > a reduced efficiency of the fuel-vapor
recovery system.
The fuel tank is full when the filler nozzle clicks off the first time.
Fuel tank capacity Approx. 15.9 gallons/60 liters, including the reserve capacity of 2.1 gallons/8 liters.
Refuel as soon as possible once your cruising range falls below 30 miles/
Close the gas cap carefully after refueling until a click is heard. While closing, be
50 km, as otherwise engine functions are not ensured and damage can occur.<
sure not to squeeze the strap which is fastened to the cap. A loose or missing cap will activate an indicator lamp and the message Check Gas Cap* on the Control Display.<
Manually releasing the fuel filler door In the event of an electrical malfunction, you can release the fuel filler door manually:
168
Fuel specifications The engine uses lead-free gasoline only.
Required fuel
Premium Unleaded Gasoline The minimum octane rating is 91. If you use gasoline with this minimum octane rating, the engine may produce knocking sounds when starting at high outside tempera- tures. This has no affect on the engine life. Minimum octane rating corresponds to the Anti Knock Index AKI and is determined according to the so-called (R+M)/2 method.
Do not fill the tank with leaded fuel, as this would cause permanent damage to the
catalytic converter.<
Use high-quality brands Field experience has indicated significant dif- ferences in fuel quality: volatility, composition, additives, etc., among gasolines offered for sale in the United States and Canada. Fuels contain- ing up to and including 10% ethanol or other oxygenates with up to 2.8% oxygen by weight, that is, 15% MTBE or 3% methanol plus an equivalent amount of co-solvent, will not void the applicable warranties with respect to defects in materials or workmanship.
The use of poor-quality fuels may result in drivability, starting and stalling problems especially under certain environmental condi- tions such as high ambient temperature and high altitude. Should you encounter drivability problems which you suspect could be related to the fuel you are using, we recommend that you respond by switching to a recognized high-quality brand. Failure to comply with these recommendations may also result in unscheduled maintenance.<
169
s
Wheels and tires
Tire inflation pressure
Information for your safety It is not merely the tires' service life, but also driving comfort and, to a great extent, driving safety that depend on the condition of the tires and the maintenance of the specified tire pres- sure.
Check the tire inflation pressure regularly and correct it, if necessary: at least twice a month and before starting long trips. If you fail to observe this precaution you may be driving on tires with incorrect tire pressures, a condi- tion that can not only compromise your vehi- cle's driving stability, but also lead to tire dam- age and the risk of an accident. Do not drive with deflated, i.e. flat tires, except when using Run-Flat Tires. A flat tire will seriously impair your vehicle's handling and braking response. Attempts to drive on a flat tire can lead to loss of control over the vehicle.<
Checking pressure Only check tire inflation pressure when the tires are cold. This means after a maximum of 1.25 miles/2 km driving or when the vehicle has been parked for at least 2 hours. When tires are warm, the tire inflation pressure is higher.
After correcting tire inflation pressures, always reinitialize the Flat Tire Monitor,
refer to page 80.<
170
Inflation pressure specifications for factory-installed tires
The inflation pressures for your factory- installed tires at ambient temperature can be found on the door post when you open the driver's door.
Inflation pressure specifications for other tire sizes The tables below provide all the correct inflation pressures for the specified tire sizes at ambient temperature.
The inflation pressures apply to the tire sizes approved and tire brands recom- mended by BMW; a list of these is available from your BMW center.< For correct identification of the right tire infla- tion pressures, observe the following: > Tire sizes for your vehicle > Load conditions > Maximum allowable driving speed
Tire inflation pressures for driving up to 100 mph or 160 km/h For normal driving up to 100 mph or 160 km/h adjust pressures to the respective tire inflation pressures listed on the following pages in the traveling speeds column for normal driving at speeds up to a maximum of 100 mph or 160 km/h to achieve optimum driving comfort.
The maximum permissible speed for these tire pressures is 100 mph or
160 km/h. Do not exceed this speed, otherwise tire damage and accidents could occur.<
Tire inflation pressures for driving above 100 mph or 160 km/h
In order to drive at maximum speeds in excess of 100 mph or 160 km/h, please
observe, and, if necessary, adjust tire pressures for speeds exceeding 100 mph or 160 km/h from the relevant table on the following pages. Otherwise tire damage and accidents could oc- cur.< Observe all national and local maximum speed limits, otherwise violations of the laws could occur.
